-cmake_minimum_required(VERSION 2.8.8)
+cmake_minimum_required(VERSION 3.5)
message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
project(SimGrid C CXX)
+## Save compiler flags preset with environment variables CFLAGS or CXXFLAGS;
+## they will used within smpicc, smpicxx.
+## Do it early so that we get their genuine values. The same will be done later for Fortran.
+set(SMPI_C_FLAGS "${CMAKE_C_FLAGS}")
+set(SMPI_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Check for the compiler #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-
-### Need to set rc ccompiler before enable language
-if(WIN32)
- SET(CMAKE_RC_COMPILER "windres")
-endif()
-
##
## Check the C/C++ standard that we need
-## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
+## See also tools/cmake/Flags.cmake that sets our paranoid warning flags
INCLUDE(CheckCCompilerFlag)
CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
## Request full debugging flags
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
-set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
if (CMAKE_COMPILER_IS_GNUCC)
if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
endif()
endif()
-## We need a decent support of the c++11 standard
-include(CheckCXXCompilerFlag)
-CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
-if(COMPILER_SUPPORTS_CXX11)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
-else()
- message(FATAL_ERROR
- "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
- "Please install a decent C++ compiler (remove CMakeCache.txt once it's installed).")
-endif()
+## We need a decent support of the C++11 and C11 standards
+set(CMAKE_CXX_STANDARD 11)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
-### And we need C11 standard, too
-include(CheckCCompilerFlag)
-CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
-if(COMPILER_SUPPORTS_C11)
- set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
-else()
- message(FATAL_ERROR
- "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
- "Please use a decent C compiler "
- "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
-endif()
-if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
- ### gcc 4.[1-5] cannot compile ucontext on OSX
- message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
- set(HAVE_UCONTEXT_H 0)
+set(CMAKE_C_STANDARD 11)
+set(CMAKE_C_STANDARD_REQUIRED ON)
+
+if (CMAKE_C_COMPILER_ID STREQUAL "Intel" AND CMAKE_C11_EXTENSION_COMPILE_OPTION STREQUAL "-std=c11")
+ set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
endif()
### Check threading support
endif()
if(CMAKE_Fortran_COMPILER)
+
# Fortran compiler detected: save it, then replace by smpiff
set(SMPI_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
- set(CMAKE_Fortran_COMPILER smpiff)
# Set flags/libs to be used in smpiff
if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
set(SMPI_Fortran_FLAGS "\"-fpic\" \"-ff2c\" \"-fno-second-underscore\"")
set(SMPI_Fortran_LIBS "\"-lgfortran\"")
+ set(SMPI_GFORTRAN 1)
elseif(CMAKE_Fortran_COMPILER_ID MATCHES "Intel")
set(SMPI_Fortran_FLAGS "\"-fPIC\" \"-nofor-main\"")
set(SMPI_Fortran_LIBS "\"-lifcore\"")
+ set(SMPI_IFORT 1)
elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI|Flang") # flang
set(SMPI_Fortran_FLAGS "\"-fPIC\"")
set(SMPI_Fortran_LIBS "")
+ set(SMPI_FLANG 1)
endif()
+ set(SMPI_Fortran_FLAGS "${SMPI_Fortran_FLAGS} ${CMAKE_Fortran_FLAGS}")
+
+ ## Request debugging flags for Fortran too
+ set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
set(SMPI_FORTRAN 1)
endif(CMAKE_Fortran_COMPILER)
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
set(SIMGRID_VERSION_MAJOR "3")
-set(SIMGRID_VERSION_MINOR "18")
-set(SIMGRID_VERSION_PATCH "90")
-set(SIMGRID_VERSION_EXTRA "-DEVEL") # Extra words to add to version string (e.g. -rc1)
+set(SIMGRID_VERSION_MINOR "23")
+set(SIMGRID_VERSION_PATCH "3") # odd => git branch; even => stable release or released snapshot
-set(SIMGRID_VERSION_DATE "2018") # Year for copyright information
+set(SIMGRID_VERSION_DATE "2019") # Year for copyright information
if(${SIMGRID_VERSION_PATCH} EQUAL "0")
set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION ERROR_VARIABLE LINKER_VERSION)
string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
-### Set the library providing dlopen
-if("${CMAKE_SYSTEM}" MATCHES "Linux")
- find_library(DL_LIBRARY dl)
-endif("${CMAKE_SYSTEM}" MATCHES "Linux")
-
### Find programs and paths
FIND_PROGRAM(GCOV_PATH gcov)
include(FindPerl)
set(PythonInterp_FIND_VERSION_MAJOR 3)
include(FindPythonInterp)
if(NOT PYTHONINTERP_FOUND)
- message(FATAL_ERROR "Please install Python (version 3 or higher).")
+ message(FATAL_ERROR "Please install Python (version 3 or higher) to compile SimGrid.")
endif()
SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
ENDIF()
if (WIN32)
message(STATUS "Disable fast raw contexts on Windows.")
- elseif(enable_address_sanitizer)
- message(STATUS "Disable fast raw contexts with ASan")
else()
set(HAVE_RAW_CONTEXTS 1)
endif()
include(CheckSymbolExists)
set(HAVE_GRAPHVIZ 0)
-include(FindGraphviz)
-
set(SIMGRID_HAVE_LUA 0)
-if(enable_lua)
- include(FindLuaSimgrid)
+if(minimal-bindings)
+ message(STATUS "Don't even look for graphviz nor lua, as we build minimal binding libraries.")
+else()
+ include(FindGraphviz)
+ if(enable_lua)
+ include(FindLuaSimgrid)
+ endif()
endif()
set(SIMGRID_HAVE_NS3 0)
set(SIMGRID_DEP "${SIMGRID_DEP} -lns${NS3_VERSION}-${lib}${NS3_SUFFIX}")
endforeach()
else()
- message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
+ message(FATAL_ERROR "Cannot find ns-3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
endif()
endif()
endif()
endif()
-# Not finding this is perfectly OK
-find_package(Boost COMPONENTS unit_test_framework)
-if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
- message(STATUS "Enabling the Boost-based unit tests.")
-else()
- message(STATUS "Disabling the Boost-based unit tests -- please install libboost-test-dev.")
-endif()
-
-
+# But we do need the core of Boost
find_package(Boost 1.48)
if(Boost_FOUND)
include_directories(${Boost_INCLUDE_DIRS})
endif()
endif()
-find_package(Boost COMPONENTS context)
-set(Boost_FOUND 1) # This component is optional
-if(Boost_CONTEXT_FOUND)
- message(STATUS "Found Boost.Context")
- set(HAVE_BOOST_CONTEXTS 1)
+# cmake before 3.13.1 does not know about stacktrace components. Fix it.
+# Usable components: https://www.boost.org/doc/libs/1_65_1/doc/html/stacktrace/configuration_and_build.html
+set(_Boost_STACKTRACE_HEADERS "boost/stacktrace.hpp")
+set(_Boost_STACKTRACE_BACKTRACE_HEADERS "boost/stacktrace.hpp")
+set(_Boost_STACKTRACE_ADDR2LINE_HEADERS "boost/stacktrace.hpp")
+
+if(minimal-bindings) # When we want a minimal jarfile, don't even search for boost optional components
+ message(STATUS "Don't even look for boost optional components, as we build minimal binding libraries.")
else()
- message (" boost : found.")
- message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
- set(HAVE_BOOST_CONTEXTS 0)
+ find_package(Boost 1.59 COMPONENTS context stacktrace_backtrace stacktrace_addr2line)
+ set(Boost_FOUND 1) # These components are optionals
+ message(STATUS "Mandatory components found. SimGrid is compilable.")
+ message(STATUS "Looking for optional Boost components:")
+
+ if (Boost_STACKTRACE_BACKTRACE_FOUND)
+ message (STATUS " stacktrace: found the fast 'backtrace' implementation. Activating human-readable stack traces.")
+ set(HAVE_BOOST_STACKTRACE_BACKTRACE 1)
+ set(SIMGRID_DEP "${SIMGRID_DEP} ${Boost_STACKTRACE_BACKTRACE_LIBRARY}")
+ else()
+ set(HAVE_BOOST_STACKTRACE_BACKTRACE 0)
+
+ if (Boost_STACKTRACE_ADDR2LINE_FOUND)
+ message (STATUS " stacktrace: found the slow 'addr2line' implementation. Activating human-readable stack traces.")
+ set(HAVE_BOOST_STACKTRACE_ADDR2LINE 1)
+ set(SIMGRID_DEP "${SIMGRID_DEP} ${Boost_STACKTRACE_ADDR2LINE_LIBRARY}")
+ else()
+ message (STATUS " stacktrace: MISSING. Install libboost-stacktrace-dev to display the stacktraces.")
+ set(HAVE_BOOST_STACKTRACE_ADDR2LINE 0)
+ endif()
+ endif()
+
+ if(Boost_CONTEXT_FOUND)
+ message (STATUS " context: found. Activating Boost contexts.")
+ set(HAVE_BOOST_CONTEXTS 1)
+ else()
+ message (STATUS " context: MISSING. Install libboost-context-dev for this optional feature.")
+ set(HAVE_BOOST_CONTEXTS 0)
+ endif()
endif()
+
# Checks for header libraries functions.
CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
-
-if(NOT APPLE) # OS X El Capitan deprecates this function
- CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
-endif()
-CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
-set(HAVE_PTHREAD_SETAFFINITY 0)
CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
+CHECK_INCLUDE_FILE("pthread_np.h" HAVE_PTHREAD_NP_H) # for pthread_setaffinity_np() on FreeBSD
if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
-CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
-CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
-CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
set(HAVE_VASPRINTF 1)
endif()
-#Check if __thread is defined
-execute_process(
- COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_thread_storage_run)
-file(REMOVE testprog)
-if(HAVE_thread_storage_run)
- set(HAVE_THREAD_LOCAL_STORAGE 1)
-else()
- set(HAVE_THREAD_LOCAL_STORAGE 0)
-endif()
-
CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
- set(HAVE_SENDFILE 1)
+ set(SG_HAVE_SENDFILE 1)
else()
- set(HAVE_SENDFILE 0)
+ set(SG_HAVE_SENDFILE 0)
endif()
if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
set(enable_model-checking FALSE)
endif()
-if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
+if(HAVE_MMAP)
SET(HAVE_MMALLOC 1)
else()
SET(HAVE_MMALLOC 0)
SET(SIMGRID_HAVE_MALLOCATOR 0)
endif()
-include(FindLibunwind)
-if(HAVE_LIBUNWIND)
- SET(SIMGRID_DEP "${SIMGRID_DEP} ${LIBUNWIND_LIBRARIES}")
-else()
+if (minimal-bindings)
+ message(STATUS "Don't look for libunwind as we build minimal binding libraries.")
if(enable_model-checking)
- message(FATAL_ERROR "Please install libunwind-dev libdw-dev libelf-dev libevent-dev if you want to compile the SimGrid model checker.")
+ message(FATAL_ERROR "You cannot enable model-checking and minimal-bindings at the same time.")
+ endif()
+else()
+ include(FindLibunwind)
+ if(HAVE_LIBUNWIND)
+ SET(SIMGRID_DEP "${SIMGRID_DEP} ${LIBUNWIND_LIBRARIES}")
+ else()
+ if(enable_model-checking)
+ message(FATAL_ERROR "Please install libunwind-dev libdw-dev libelf-dev libevent-dev if you want to compile the SimGrid model checker.")
+ endif()
endif()
endif()
set(SIMGRID_DEP "${SIMGRID_DEP} ${LIBEVENT_LIBRARIES} ${LIBELF_LIBRARIES} ${LIBDW_LIBRARIES}")
set(SIMGRID_HAVE_MC 1)
if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_java)
- message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling java")
+ message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling the Java bindings.")
set(enable_java FALSE)
endif()
else()
mark_as_advanced(PATH_LIBDW_LIB)
if (enable_model-checking AND enable_ns3)
- message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
+ message(FATAL_ERROR "Cannot activate both model-checking and ns-3 bindings: ns-3 pull too much dependencies for the MC to work")
endif()
if(enable_smpi)
SET(HAVE_SMPI 1)
- if("${CMAKE_SYSTEM}" MATCHES "Darwin|FreeBSD|Linux")
- SET(USE_LIBUTIL 0)
+ if(NOT WIN32)
SET(HAVE_PRIVATIZATION 1)
else()
message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
endif()
#--------------------------------------------------------------------------------------------------
-### Check for GNU dynamic linker
-CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
-if (HAVE_DLFCN_H)
- execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_GNU_LD_compil
- )
- if(HAVE_GNU_LD_compil)
- set(HAVE_GNU_LD 0)
- message(STATUS "Warning: test program toward GNU ld failed to compile:")
- message(STATUS "${HAVE_GNU_LD_comp_output}")
- else()
- execute_process(COMMAND ./test_gnu_ld
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_GNU_LD_run
- OUTPUT_VARIABLE var_exec
- )
-
- if(NOT HAVE_GNU_LD_run)
- set(HAVE_GNU_LD 1)
- message(STATUS "We are using GNU dynamic linker")
- else()
- set(HAVE_GNU_LD 0)
- message(STATUS "Warning: error while checking for GNU ld:")
- message(STATUS "Test output: '${var_exec}'")
- message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
- endif()
- file(REMOVE test_gnu_ld)
- endif()
-endif()
-
-#--------------------------------------------------------------------------------------------------
-### Initialize of CONTEXT THREADS
-
-set(HAVE_THREAD_CONTEXTS 0)
-if(CMAKE_USE_PTHREADS_INIT)
- ### Test that we have a way to create semaphores
-
- if(HAVE_SEM_OPEN_LIB)
- execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
- )
-
- # Test sem_open by compiling:
- if(HAVE_SEM_OPEN_compil)
- set(HAVE_SEM_OPEN 0)
- message(STATUS "Warning: sem_open not compilable")
- message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
- else()
- set(HAVE_SEM_OPEN 1)
- message(STATUS "sem_open is compilable")
- endif()
-
- # If we're not crosscompiling, we check by executing the program:
- if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
- execute_process(COMMAND ./sem_open
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_SEM_OPEN_run
- OUTPUT_VARIABLE var_compil
- )
- if (NOT HAVE_SEM_OPEN_run)
- set(HAVE_SEM_OPEN 1)
- message(STATUS "sem_open is executable")
- else()
- set(HAVE_SEM_OPEN 0)
- if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
- else()
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
- endif()
- message(STATUS "Warning: sem_open not executable")
- message(STATUS "Compilation output: '${var_compil}'")
- message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
- endif()
- endif()
- file(REMOVE sem_open)
- else()
- set(HAVE_SEM_OPEN 0)
- endif()
-
- if(HAVE_SEM_INIT_LIB)
- execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_SEM_INIT_run
- OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
-
- # Test sem_init by compiling:
- if(HAVE_SEM_INIT_compil)
- set(HAVE_SEM_INIT 0)
- message(STATUS "Warning: sem_init not compilable")
- message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
- else()
- set(HAVE_SEM_INIT 1)
- message(STATUS "sem_init is compilable")
- endif()
-
- # If we're not crosscompiling, we check by executing the program:
- if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
- execute_process(COMMAND ./sem_init
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_SEM_INIT_run
- OUTPUT_VARIABLE var_compil
- )
- if (NOT HAVE_SEM_INIT_run)
- set(HAVE_SEM_INIT 1)
- message(STATUS "sem_init is executable")
- else()
- set(HAVE_SEM_INIT 0)
- if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
- else()
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
- endif()
- message(STATUS "Warning: sem_init not executable")
- message(STATUS "Compilation output: '${var_compil}'")
- message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
- endif()
- endif()
- file(REMOVE sem_init)
- else()
- set(HAVE_SEM_INIT 0)
- endif()
-
- if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
- message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
- endif()
-
- set(HAVE_THREAD_CONTEXTS 1)
- message(STATUS "Support for thread context factory ok.")
-endif()
+### Check what context backends are available
set(HAVE_UCONTEXT_CONTEXTS 0)
if(NOT HAVE_UCONTEXT_H)
elseif(APPLE)
message(STATUS "No ucontext factory: Apple don't want us to use them.")
set(HAVE_UCONTEXT_H 0)
-elseif(enable_address_sanitizer)
- message(STATUS "No ucontext factory: ASan does not support it (see http://code.google.com/p/address-sanitizer/issues/detail?id=189)")
else()
try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
OUTPUT_VARIABLE compile_makecontext_output)
file(REMOVE test_stackgrowth)
#--------------------------------------------------------------------------------------------------
-### check for addr2line
-find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
-if(ADDR2LINE)
- set(ADDR2LINE "${ADDR2LINE}/addr2line")
-endif()
-
###############
## GIT version check
##
if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
- execute_process(
- COMMAND git remote
- COMMAND head -n 1
- WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
- OUTPUT_VARIABLE remote
- OUTPUT_STRIP_TRAILING_WHITESPACE)
- #message(STATUS "Git remote: ${remote}")
- execute_process(COMMAND git config --get remote.${remote}.url
- WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
- OUTPUT_VARIABLE url
+ execute_process(COMMAND git rev-parse --verify --short HEAD
+ WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}
+ OUTPUT_VARIABLE GIT_VERSION
OUTPUT_STRIP_TRAILING_WHITESPACE)
- #message(STATUS "Git url: ${url}")
- if(url)
- execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
- WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
- OUTPUT_VARIABLE GIT_VERSION
- OUTPUT_STRIP_TRAILING_WHITESPACE)
- message(STATUS "Git version: ${GIT_VERSION}")
-
- execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
- WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
- OUTPUT_VARIABLE GIT_DATE
- OUTPUT_STRIP_TRAILING_WHITESPACE)
- message(STATUS "Git date: ${GIT_DATE}")
- string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
-
- execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
- WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
- OUTPUT_VARIABLE SIMGRID_GITHASH
- OUTPUT_STRIP_TRAILING_WHITESPACE)
+ # Check for uncommitted changes
+ execute_process(COMMAND git diff --name-only HEAD
+ WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}
+ OUTPUT_VARIABLE files_changed)
+ if(files_changed)
+ set(GIT_VERSION "${GIT_VERSION}-dirty")
endif()
elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
else()
set(GIT_VERSION "none, release version")
endif()
+message(STATUS "Git version: ${GIT_VERSION}")
-### Setup gcc & clang flags
+### Define source packages for Libs
+include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
+
+### Setup gcc & clang flags (include after DefinePackage.cmake, and before generating header files)
if (NOT MSVC)
- include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
+ include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Flags.cmake)
endif()
### Generate the required headers and scripts
#############################################
# Avoid triggering a (full) rebuild by touching the files if they did not really change
-configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
-configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/src/simgrid/version.h.in" "${CMAKE_BINARY_DIR}/src/simgrid/version.h.generated" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid/config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated" @ONLY IMMEDIATE)
execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
-execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/simgrid/version.h.generated ${CMAKE_BINARY_DIR}/src/simgrid/version.h)
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid/config.h)
file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
-file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
+file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated)
+file(REMOVE ${CMAKE_BINARY_DIR}/src/simgrid/version.h.generated)
# We need two versions of the SMPI scripts because they contain the path to the library
# so, it depends of whether SimGrid is installed, or run from the sources (during the build)
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
endif()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-set(SMPIMAIN smpimain)
+set(SMPIMAIN ${libdir}/simgrid/smpimain)
+set(SMPIREPLAYMAIN ${libdir}/simgrid/smpireplaymain)
configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
+#configure mpif.f90 to build mpi.mod
+if(SMPI_FORTRAN)
+ set(MODULE_MPIF_IN "module mpi")
+ set(MODULE_MPIF_OUT "end module mpi")
+ configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated @ONLY)
+ execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+ set(CMAKE_Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/include/smpi)
+ add_library(mpi SHARED ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+endif()
+
foreach(script cc cxx ff f90 run)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
endforeach()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
endif()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-set(SMPIMAIN ${CMAKE_BINARY_DIR}/bin/smpimain)
+set(SMPIMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpimain)
+set(SMPIREPLAYMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpireplaymain)
foreach(script cc cxx ff f90 run)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
set(generated_headers_to_install
${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
- ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
+ ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h
)
set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allreduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources COPYONLY)
+
set(generated_files_to_clean
${generated_files_to_clean}
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
- ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/replay_multiple_manual.tesh
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty1
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time_and_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed1
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_nojob
)
endif()
SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
"${generated_files_to_clean}")
-### Define source packages for Libs
-include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
+add_custom_target(tests COMMENT "Recompiling the tests")
### Build some Maintainer files
include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
-include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
### Make Libs
if(NOT WIN32)
include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
endif()
+# Python binding (with pybind11)
+################
+# Our usage of pybind11::overload_cast mandates C++14
+if((NOT DEFINED enable_python) OR enable_python)
+ get_property(known_features GLOBAL PROPERTY CMAKE_CXX_KNOWN_FEATURES)
+
+ if("cxx_std_14" IN_LIST known_features)
+
+ if(EXISTS ${CMAKE_HOME_DIRECTORY}/pybind11) # Try to use a local copy of pybind11, if any
+ message(STATUS "Use the internal copy of pybind11 (using C++14).")
+ add_subdirectory(${CMAKE_HOME_DIRECTORY}/pybind11)
+ set(pybind11_FOUND ON)
+
+ set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/pybind11/tools/)
+ set(Python_ADDITIONAL_VERSIONS 3.7 3.6 3.5 3.4)
+ find_package(PythonLibsNew ${PYBIND11_PYTHON_VERSION} REQUIRED)
+
+ else()
+ find_package(pybind11 CONFIG)
+ if (pybind11_VERSION VERSION_LESS 2.2)
+ message(STATUS "SimGrid needs at least v2.2 of pybind11. Disabling the Python bindings (found version: ${pybind11_VERSION}).")
+ set(pybind11_FOUND OFF)
+ endif()
+ endif()
+
+ if(NOT PYTHONLIBS_FOUND)
+ message(STATUS "Python libs not found. Turn pybind11 off.")
+
+ set(pybind11_FOUND OFF)
+ endif()
+
+ else()
+ message(STATUS "No support for C++14 detected, don't even search for pybind11.")
+ set(pybind11_FOUND OFF)
+ endif()
+ unset(known_features)
+endif()
+
+option(enable_python "Whether the Python bindings are activated." ${pybind11_FOUND}) # ON by default if dependencies are met
+
+if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_model-checking AND enable_python)
+ message(WARNING "FreeBSD + Model-Checking + Python = too much for now. Disabling the Python bindings.")
+ set(enable_python FALSE)
+endif()
+
+if(enable_python)
+ if(pybind11_FOUND)
+ message(STATUS "Found pybind11, with C++14.")
+ if(NOT enable_lto)
+ set(pybind11_options NO_EXTRAS)
+ endif()
+ pybind11_add_module(python-bindings src/bindings/python/simgrid_python.cpp ${pybind11_options})
+ target_compile_features(python-bindings PRIVATE cxx_std_14)
+ target_link_libraries(python-bindings PUBLIC simgrid)
+ set_target_properties(python-bindings PROPERTIES
+ LIBRARY_OUTPUT_NAME simgrid
+ CXX_VISIBILITY_PRESET "default")
+ add_dependencies(tests python-bindings)
+ set_property(TARGET python-bindings
+ APPEND PROPERTY INCLUDE_DIRECTORIES "${INTERNAL_INCLUDES}")
+ else()
+ message(FATAL_ERROR "Please install pybind11-dev to build the Python bindings (or disable that option).")
+ endif()
+endif()
+mark_as_advanced(PYBIND11_PYTHON_VERSION)
+mark_as_advanced(pybind11_DIR)
+
### Make tests
if(enable_memcheck_xml)
set(enable_memcheck true)
message(" ${line}")
endforeach()
message("##########################################")
-message("#### Content of simgrid_config.h ####")
+message("#### Content of simgrid/config.h ####")
message("##########################################")
-file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
+file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h config_output)
LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
foreach(line ${config_output})
message(" ${line}")
if(${Java_FOUND})
message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
message(" version .............: ${Java_VERSION_STRING}")
+ message(" runtime .............: ${Java_JAVA_EXECUTABLE}")
endif()
if(CMAKE_Fortran_COMPILER)
message(" Compiler: Fortran ...........: ${SMPI_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
message("")
if (SIMGRID_HAVE_NS3)
- message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
+ message(" Compile ns-3 ................: yes (path: ${NS3_PATH})")
else()
- message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
+ message(" Compile ns-3 ................: NO (hint: ${NS3_HINT})")
endif()
if (${Java_FOUND})
else()
message(" Compile Java ................: NO")
endif()
+if(pybind11_FOUND)
+ message(" Compile Python bindings .....: ${enable_python}")
+ message(" module ....................: ${PYTHON_MODULE_PREFIX}simgrid${PYTHON_MODULE_EXTENSION}")
+else()
+ message(" Compile Python bindings .....: NO (disabled, or pybind11 not found)")
+endif()
message(" Compile Lua .................: ${SIMGRID_HAVE_LUA}")
message(" Compile Smpi ................: ${HAVE_SMPI}")
message(" Smpi fortran ..............: ${SMPI_FORTRAN}")