1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
19 INCLUDE(CheckCCompilerFlag)
20 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
22 ## Request full debugging flags
23 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
24 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
25 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
27 if (CMAKE_COMPILER_IS_GNUCC)
28 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
30 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
31 "You need a sufficient support of c++11 to compile SimGrid.")
35 ## We need a decent support of the c++11 standard
36 include(CheckCXXCompilerFlag)
37 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
38 if(COMPILER_SUPPORTS_CXX11)
39 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
42 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
43 "Please use a decent C++ compiler.")
46 ### And we need C11 standard, too
47 include(CheckCCompilerFlag)
48 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
49 if(COMPILER_SUPPORTS_C11)
50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
53 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
54 "Please use a decent C compiler "
55 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
57 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
58 ### gcc 4.[1-5] cannot compile ucontext on OSX
59 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
60 set(HAVE_UCONTEXT_H 0)
63 ### Check threading support
64 set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
68 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
71 if ((NOT DEFINED enable_smpi) OR enable_smpi)
72 # First unset the compiler in case we're re-running cmake over a previous
73 # configuration where it was saved as smpiff
74 unset(CMAKE_Fortran_COMPILER)
78 enable_language(Fortran OPTIONAL)
81 if(CMAKE_Fortran_COMPILER)
82 # Fortran compiler detected: save it, then replace by smpiff
83 set(SMPI_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
84 set(CMAKE_Fortran_COMPILER smpiff)
86 # Set flags/libs to be used in smpiff
87 if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
88 set(SMPI_Fortran_FLAGS "\"-fpic\" \"-ff2c\" \"-fno-second-underscore\"")
89 set(SMPI_Fortran_LIBS "\"-lgfortran\"")
90 elseif(CMAKE_Fortran_COMPILER_ID MATCHES "Intel")
91 set(SMPI_Fortran_FLAGS "\"-fPIC\" \"-nofor-main\"")
92 set(SMPI_Fortran_LIBS "\"-lifcore\"")
93 elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI") # flang
94 set(SMPI_Fortran_FLAGS "\"-fPIC\"")
95 set(SMPI_Fortran_LIBS "")
99 endif(CMAKE_Fortran_COMPILER)
103 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
104 # Build the version number #
105 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
107 set(SIMGRID_VERSION_MAJOR "3")
108 set(SIMGRID_VERSION_MINOR "16")
109 set(SIMGRID_VERSION_PATCH "0")
110 set(SIMGRID_VERSION_EXTRA "-DEVEL") # Extra words to add to version string (e.g. -rc1)
112 set(SIMGRID_VERSION_DATE "2017") # Year for copyright information
114 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
115 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
117 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
120 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
122 set(libsimgrid_version "${release_version}")
123 set(libsimgrid-java_version "${release_version}")
125 ### SET THE LIBRARY EXTENSION
135 execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION ERROR_VARIABLE LINKER_VERSION)
136 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
138 ### Set the library providing dlopen
139 if("${CMAKE_SYSTEM}" MATCHES "Linux")
140 find_library(DL_LIBRARY dl)
141 endif("${CMAKE_SYSTEM}" MATCHES "Linux")
143 ### Find programs and paths
144 FIND_PROGRAM(GCOV_PATH gcov)
147 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
150 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
151 set(PythonInterp_FIND_VERSION 3)
152 set(PythonInterp_FIND_VERSION_COUNT 1)
153 set(PythonInterp_FIND_VERSION_MAJOR 3)
154 include(FindPythonInterp)
155 if(NOT PYTHONINTERP_FOUND)
156 message(FATAL_ERROR "Please install Python (version 3 or higher).")
160 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
161 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
163 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
165 ### Compute the include paths
167 ${CMAKE_HOME_DIRECTORY}
168 ${CMAKE_HOME_DIRECTORY}/include
169 ${CMAKE_HOME_DIRECTORY}/src/include
171 ${CMAKE_BINARY_DIR}/include
174 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
175 set(INCLUDES ${INCLUDES} /usr/include/)
179 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
180 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
181 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
182 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
183 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
184 unset(CMAKE_INCLUDE_WIN)
187 include_directories(${INCLUDES})
189 # library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
190 set(SIMGRID_DEP "-lm")
192 ### Determine the assembly flavor that we need today
193 set(HAVE_RAW_CONTEXTS 0)
194 include(CMakeDetermineSystem)
195 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
196 IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
197 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
198 set(SIMGRID_PROCESSOR_i686 1)
199 set(SIMGRID_PROCESSOR_x86_64 0)
201 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
202 set(SIMGRID_PROCESSOR_i686 0)
203 set(SIMGRID_PROCESSOR_x86_64 1)
206 message(STATUS "Disable fast raw contexts on Windows.")
208 set(HAVE_RAW_CONTEXTS 1)
211 set(SIMGRID_PROCESSOR_i686 0)
212 set(SIMGRID_PROCESSOR_x86_64 0)
215 include(CheckFunctionExists)
216 include(CheckTypeSize)
217 include(CheckIncludeFile)
218 include(CheckIncludeFiles)
219 include(CheckLibraryExists)
220 include(CheckSymbolExists)
223 include(FindGraphviz)
225 set(SIMGRID_HAVE_LUA 0)
227 include(FindLuaSimgrid)
230 set(SIMGRID_HAVE_NS3 0)
233 if (SIMGRID_HAVE_NS3)
234 set(SIMGRID_HAVE_NS3 1)
236 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
241 set(Boost_USE_STATIC_LIBS 1)
247 message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
251 # Not finding this is perfectly OK
252 find_package(Boost COMPONENTS unit_test_framework)
253 if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
254 message("-- (enabling the Boost-based unit tests)")
256 message("-- (disabling the Boost-based unit tests -- please install libboost-test-dev)")
260 find_package(Boost 1.48)
262 include_directories(${Boost_INCLUDE_DIRS})
265 message(FATAL_ERROR "Boost libraries not found. Try to install them with 'sudo fink install boost1.53.nopython' (check the exact name with 'fink list boost') or 'sudo brew install boost'")
267 message(FATAL_ERROR "Boost libraries not found. Install libboost-dev (>= 1.48.0).")
271 find_package(Boost COMPONENTS context)
272 set(Boost_FOUND 1) # This component is optional
273 if(Boost_CONTEXT_FOUND)
274 if (Boost_VERSION LESS 105600)
275 message("Found Boost.Context API v1")
276 set(HAVE_BOOST_CONTEXTS 1)
277 elseif(Boost_VERSION LESS 106100)
278 message("Found Boost.Context API v2")
279 set(HAVE_BOOST_CONTEXTS 2)
281 message(" WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
282 set(HAVE_BOOST_CONTEXTS 0)
285 message (" boost : found.")
286 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
287 set(HAVE_BOOST_CONTEXTS 0)
290 # Checks for header libraries functions.
291 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
293 if(NOT APPLE) # OS X El Capitan deprecates this function
294 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
296 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
297 set(HAVE_PTHREAD_SETAFFINITY 0)
298 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
300 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
301 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
303 # Use the GNU version of unusual modifiers like PRIx64
304 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
305 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
307 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
310 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
311 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
312 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
313 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
314 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
315 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
316 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
317 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
319 CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
320 CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
321 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
322 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
323 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
324 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
325 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
326 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
327 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
328 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
330 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
332 # The detection of vasprintf fails on MinGW, assumingly because it's
333 # defined as an inline function in stdio.h instead of a regular
334 # function. So force the result to be 1 despite of the test.
335 set(HAVE_VASPRINTF 1)
338 #Check if __thread is defined
340 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
341 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
342 RESULT_VARIABLE HAVE_thread_storage_run)
343 file(REMOVE testprog)
344 if(HAVE_thread_storage_run)
345 set(HAVE_THREAD_LOCAL_STORAGE 1)
347 set(HAVE_THREAD_LOCAL_STORAGE 0)
350 CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
351 CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
352 if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
358 if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
359 message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
360 set(enable_model-checking FALSE)
363 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
367 if(enable_model-checking)
368 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
370 SET(enable_model-checking 0)
374 set(SIMGRID_HAVE_JEDULE 1)
376 set(SIMGRID_HAVE_JEDULE 0)
379 if(enable_mallocators)
380 SET(SIMGRID_HAVE_MALLOCATOR 1)
382 SET(SIMGRID_HAVE_MALLOCATOR 0)
385 include(FindLibunwind)
388 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind")
390 # Apple forbids to link directly against its libunwind implementation
391 # So let's comply and link against the System framework
392 SET(SIMGRID_DEP "${SIMGRID_DEP} -lSystem")
394 if("${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
395 set(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-ptrace")
396 # This supposes that the host machine is either an AMD or a X86.
397 # This is deeply wrong, and should be fixed by manually loading -lunwind-PLAT (FIXME)
398 if(SIMGRID_PROCESSOR_x86_64)
399 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86_64")
401 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86")
405 if(enable_model-checking)
406 message(FATAL_ERROR "Please install libunwind-dev libdw-dev libevent-dev if you want to compile the SimGrid model checker.")
410 if(enable_model-checking)
411 find_package(Libdw REQUIRED)
412 find_package(Libevent REQUIRED)
413 include_directories(${LIBDW_INCLUDE_DIR} ${LIBEVENT_INCLUDE_DIR})
414 set(SIMGRID_DEP "${SIMGRID_DEP} ${LIBEVENT_LIBRARIES} ${LIBDW_LIBRARIES}")
415 set(SIMGRID_HAVE_MC 1)
416 if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_java)
417 message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling java")
418 set(enable_java FALSE)
421 SET(SIMGRID_HAVE_MC 0)
425 if (enable_model-checking AND enable_ns3)
426 message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
431 if("${CMAKE_SYSTEM}" MATCHES "Darwin|FreeBSD|Linux")
433 SET(HAVE_PRIVATIZATION 1)
435 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
436 SET(HAVE_PRIVATIZATION 0)
442 #--------------------------------------------------------------------------------------------------
443 ### Check for GNU dynamic linker
444 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
446 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
447 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
448 OUTPUT_VARIABLE HAVE_GNU_LD_compil
450 if(HAVE_GNU_LD_compil)
452 message(STATUS "Warning: test program toward GNU ld failed to compile:")
453 message(STATUS "${HAVE_GNU_LD_comp_output}")
455 execute_process(COMMAND ./test_gnu_ld
456 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
457 RESULT_VARIABLE HAVE_GNU_LD_run
458 OUTPUT_VARIABLE var_exec
461 if(NOT HAVE_GNU_LD_run)
463 message(STATUS "We are using GNU dynamic linker")
466 message(STATUS "Warning: error while checking for GNU ld:")
467 message(STATUS "Test output: '${var_exec}'")
468 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
470 file(REMOVE test_gnu_ld)
474 #--------------------------------------------------------------------------------------------------
475 ### Initialize of CONTEXT THREADS
477 set(HAVE_THREAD_CONTEXTS 0)
478 if(CMAKE_USE_PTHREADS_INIT)
479 ### Test that we have a way to create semaphores
481 if(HAVE_SEM_OPEN_LIB)
482 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
483 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
484 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
487 # Test sem_open by compiling:
488 if(HAVE_SEM_OPEN_compil)
490 message(STATUS "Warning: sem_open not compilable")
491 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
494 message(STATUS "sem_open is compilable")
497 # If we're not crosscompiling, we check by executing the program:
498 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
499 execute_process(COMMAND ./sem_open
500 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
501 RESULT_VARIABLE HAVE_SEM_OPEN_run
502 OUTPUT_VARIABLE var_compil
504 if (NOT HAVE_SEM_OPEN_run)
506 message(STATUS "sem_open is executable")
509 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
510 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
512 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
514 message(STATUS "Warning: sem_open not executable")
515 message(STATUS "Compilation output: '${var_compil}'")
516 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
519 file(REMOVE sem_open)
524 if(HAVE_SEM_INIT_LIB)
525 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
526 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
527 RESULT_VARIABLE HAVE_SEM_INIT_run
528 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
530 # Test sem_init by compiling:
531 if(HAVE_SEM_INIT_compil)
533 message(STATUS "Warning: sem_init not compilable")
534 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
537 message(STATUS "sem_init is compilable")
540 # If we're not crosscompiling, we check by executing the program:
541 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
542 execute_process(COMMAND ./sem_init
543 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
544 RESULT_VARIABLE HAVE_SEM_INIT_run
545 OUTPUT_VARIABLE var_compil
547 if (NOT HAVE_SEM_INIT_run)
549 message(STATUS "sem_init is executable")
552 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
553 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
555 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
557 message(STATUS "Warning: sem_init not executable")
558 message(STATUS "Compilation output: '${var_compil}'")
559 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
562 file(REMOVE sem_init)
567 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
568 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
571 set(HAVE_THREAD_CONTEXTS 1)
572 message("-- Support for thread context factory ok.")
575 set(HAVE_UCONTEXT_CONTEXTS 0)
576 if(NOT HAVE_UCONTEXT_H)
577 message("-- No ucontext factory: <ucontext.h> not found.")
579 message("-- No ucontext factory: Apple don't want us to use them.")
580 set(HAVE_UCONTEXT_H 0)
582 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
583 OUTPUT_VARIABLE compile_makecontext_output)
585 #If can have both context
586 if(compile_makecontext)
587 set(HAVE_UCONTEXT_CONTEXTS 1)
588 message("-- Support for ucontext factory ok.")
590 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
591 message("-- No ucontext factory: makecontext() is not compilable.")
594 # Stack setup (size and address)
595 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
596 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
597 RUN_OUTPUT_VARIABLE stack_setup)
599 LIST(LENGTH stack_setup stack_setup_len)
600 if("${stack_setup_len}" STREQUAL "2")
601 LIST(GET stack_setup 0 makecontext_addr)
602 LIST(GET stack_setup 1 makecontext_size)
603 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
604 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
606 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
610 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
611 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
613 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
614 RUN_OUTPUT_VARIABLE stack
615 COPY_FILE test_stackgrowth)
617 if("${stack}" STREQUAL "down")
618 set(PTH_STACKGROWTH "-1")
619 elseif("${stack}" STREQUAL "up")
620 set(PTH_STACKGROWTH "1")
622 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
623 set(PTH_STACKGROWTH "-1")
624 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
625 set(PTH_STACKGROWTH "-1")
627 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
630 # If the test ran well, remove the test binary
631 file(REMOVE test_stackgrowth)
632 #--------------------------------------------------------------------------------------------------
634 ### check for addr2line
635 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
637 set(ADDR2LINE "${ADDR2LINE}/addr2line")
643 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
647 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
648 OUTPUT_VARIABLE remote
649 OUTPUT_STRIP_TRAILING_WHITESPACE)
650 #message(STATUS "Git remote: ${remote}")
651 execute_process(COMMAND git config --get remote.${remote}.url
652 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
654 OUTPUT_STRIP_TRAILING_WHITESPACE)
655 #message(STATUS "Git url: ${url}")
657 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
658 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
659 OUTPUT_VARIABLE GIT_VERSION
660 OUTPUT_STRIP_TRAILING_WHITESPACE)
661 message(STATUS "Git version: ${GIT_VERSION}")
663 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
664 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
665 OUTPUT_VARIABLE GIT_DATE
666 OUTPUT_STRIP_TRAILING_WHITESPACE)
667 message(STATUS "Git date: ${GIT_DATE}")
668 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
670 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
671 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
672 OUTPUT_VARIABLE SIMGRID_GITHASH
673 OUTPUT_STRIP_TRAILING_WHITESPACE)
675 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
676 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
678 set(GIT_VERSION "none, release version")
681 ### Generate the required headers and scripts
682 #############################################
684 # Avoid triggering a (full) rebuild by touching the files if they did not really change
685 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
686 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
687 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
688 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
689 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
690 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
692 # We need two versions of the SMPI scripts because they contain the path to the library
693 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
695 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
697 ### SMPI script used when simgrid is installed
698 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
699 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
700 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
701 set(libdir ${exec_prefix}/lib)
702 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
704 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
706 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
707 set(SMPIMAIN smpimain)
709 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
710 foreach(script cc cxx ff f90 run)
711 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
714 ### SMPI scripts used when compiling simgrid
715 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
716 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
717 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
718 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
719 set(libdir "${CMAKE_BINARY_DIR}/lib")
720 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
722 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
724 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
725 set(SMPIMAIN ${CMAKE_BINARY_DIR}/bin/smpimain)
727 foreach(script cc cxx ff f90 run)
728 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
732 foreach(script cc cxx ff f90 run)
733 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
734 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
738 set(generated_headers_to_install
739 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
740 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
743 set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
745 set(generated_files_to_clean
747 ${generated_headers_to_install}
748 ${CMAKE_BINARY_DIR}/bin/smpicc
749 ${CMAKE_BINARY_DIR}/bin/smpicxx
750 ${CMAKE_BINARY_DIR}/bin/smpiff
751 ${CMAKE_BINARY_DIR}/bin/smpif90
752 ${CMAKE_BINARY_DIR}/bin/smpirun
753 ${CMAKE_BINARY_DIR}/bin/colorize
754 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
755 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
758 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
759 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
761 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
768 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
777 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
778 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
779 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
780 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
781 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
782 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
783 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
784 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
785 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
786 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
787 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
788 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
789 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
790 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
791 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
792 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
793 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
794 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
795 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
796 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
797 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
798 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
799 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
800 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
801 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
802 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
803 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
804 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
805 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
806 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
807 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
809 set(generated_files_to_clean
810 ${generated_files_to_clean}
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
812 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
819 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
823 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
828 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
829 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
830 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
831 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
832 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
833 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
834 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
835 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
836 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
837 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
838 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
839 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
840 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
841 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
842 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
843 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
844 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
845 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
846 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
847 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
848 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
849 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
850 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
851 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
852 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
853 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
854 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
855 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
856 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
857 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
858 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
862 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
863 "${generated_files_to_clean}")
865 ### Define source packages for Libs
866 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
868 ### Build some Maintainer files
869 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
870 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
872 ### Setup gcc & clang flags
874 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
879 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
881 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
885 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
889 if(enable_memcheck_xml)
890 set(enable_memcheck true)
895 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
896 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
898 ### Define subdirectories
899 foreach(cmakefile ${CMAKEFILES_TXT})
900 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
901 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
904 ### Setup the distrib
905 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
907 ### Build the docs if asked to
908 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
910 ### Print the result of configuration
912 message("##########################################")
913 message("#### Content of src/internal_config.h ####")
914 message("##########################################")
915 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
916 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
917 foreach(line ${config_output})
920 message("##########################################")
921 message("#### Content of simgrid_config.h ####")
922 message("##########################################")
923 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
924 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
925 foreach(line ${config_output})
928 message("##########################################")
929 message("#### End of configuration headers ####")
930 message("##########################################")
932 message("\nConfiguration of package `simgrid':")
933 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
934 message(" Build Name ..................: ${BUILDNAME}")
935 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
936 message(" Site ........................: ${SITE}")
937 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
939 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
941 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
944 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
945 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
946 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
947 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
948 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
950 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
951 message(" version .............: ${Java_VERSION_STRING}")
953 message(" SWIG ................: Version ${SWIG_VERSION} found.")
955 message(" SWIG ................: Missing.")
958 if(CMAKE_Fortran_COMPILER)
959 message(" Compiler: Fortran ...........: ${SMPI_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
960 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
962 message(" Linker: .....................: ${CMAKE_LINKER}")
963 message(" version .............: ${LINKER_VERSION}")
964 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
966 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
967 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
968 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
969 message(" with LTO ....................: ${enable_lto}")
972 if (SIMGRID_HAVE_NS3)
973 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
975 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
979 message(" Compile Java ................: yes")
980 message(" Native lib in jar .........: ${enable_lib_in_jar}")
982 message(" Compile Java ................: NO")
984 message(" Compile Lua .................: ${SIMGRID_HAVE_LUA}")
985 message(" Compile Smpi ................: ${HAVE_SMPI}")
986 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
987 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
988 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
989 message(" PAPI support...............: ${HAVE_PAPI}")
990 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
992 message(" Maintainer mode .............: ${enable_maintainer_mode}")
993 message(" Documentation................: ${enable_documentation}")
994 message(" Model checking ..............: ${SIMGRID_HAVE_MC}")
995 message(" Jedule mode ................: ${SIMGRID_HAVE_JEDULE}")
996 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
997 message(" Mallocators .................: ${enable_mallocators}")
999 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
1002 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
1003 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
1004 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")