1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
19 INCLUDE(CheckCCompilerFlag)
20 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
22 ## Request full debugging flags
23 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
24 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
25 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
27 if (CMAKE_COMPILER_IS_GNUCC)
28 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
30 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
31 "You need a sufficient support of c++11 to compile SimGrid.")
35 ## We need a decent support of the c++11 standard
36 include(CheckCXXCompilerFlag)
37 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
38 if(COMPILER_SUPPORTS_CXX11)
39 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
42 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
43 "Please use a decent C++ compiler.")
46 ### And we need C11 standard, too
47 include(CheckCCompilerFlag)
48 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
49 if(COMPILER_SUPPORTS_C11)
50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
53 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
54 "Please use a decent C compiler "
55 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
57 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
58 ### gcc 4.[1-5] cannot compile ucontext on OSX
59 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
60 set(HAVE_UCONTEXT_H 0)
65 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
68 if ((NOT DEFINED enable_smpi) OR enable_smpi)
69 # First unset the compiler in case we're re-running cmake over a previous
70 # configuration where it was saved as smpiff
71 unset(CMAKE_Fortran_COMPILER)
75 enable_language(Fortran OPTIONAL)
78 if(CMAKE_Fortran_COMPILER)
79 # Fortran compiler detected: save it, then replace by smpiff
80 set(SAVED_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
81 set(CMAKE_Fortran_COMPILER smpiff)
83 endif(CMAKE_Fortran_COMPILER)
87 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
88 # Build the version number #
89 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
91 set(SIMGRID_VERSION_MAJOR "3")
92 set(SIMGRID_VERSION_MINOR "13")
93 set(SIMGRID_VERSION_PATCH "90")
94 set(SIMGRID_VERSION_EXTRA "-prealpha") # Extra words to add to version string (e.g. -rc1)
96 set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
98 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
99 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
101 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
104 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
106 set(libsimgrid_version "${release_version}")
107 set(libsimgrid-java_version "${release_version}")
109 ### SET THE LIBRARY EXTENSION
119 execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION)
120 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
122 ### Find programs and paths
123 FIND_PROGRAM(GCOV_PATH gcov)
126 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
129 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
130 set(PythonInterp_FIND_VERSION 3)
131 set(PythonInterp_FIND_VERSION_COUNT 1)
132 set(PythonInterp_FIND_VERSION_MAJOR 3)
133 include(FindPythonInterp)
134 if(NOT PYTHONINTERP_FOUND)
135 message(FATAL_ERROR "Please install Python (version 3 or higher).")
139 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
140 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
142 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
144 ### Compute the include paths
146 ${CMAKE_HOME_DIRECTORY}
147 ${CMAKE_HOME_DIRECTORY}/include
148 ${CMAKE_HOME_DIRECTORY}/src/include
150 ${CMAKE_BINARY_DIR}/include
153 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
154 set(INCLUDES ${INCLUDES} /usr/include/)
157 ### Check 32bits or 64bits
158 IF(CMAKE_SIZEOF_VOID_P EQUAL 4)
165 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
166 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
167 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
168 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
169 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
170 unset(CMAKE_INCLUDE_WIN)
173 include_directories(${INCLUDES})
177 ### Determine the assembly flavor that we need today
178 set(HAVE_RAW_CONTEXTS 0)
179 include(CMakeDetermineSystem)
180 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
182 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
183 set(PROCESSOR_i686 1)
184 set(PROCESSOR_x86_64 0)
186 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
187 set(PROCESSOR_i686 0)
188 set(PROCESSOR_x86_64 1)
191 message(STATUS "Disable fast raw contexts on Windows.")
193 set(HAVE_RAW_CONTEXTS 1)
196 set(PROCESSOR_i686 0)
197 set(PROCESSOR_x86_64 0)
200 include(CheckFunctionExists)
201 include(CheckTypeSize)
202 include(CheckIncludeFile)
203 include(CheckIncludeFiles)
204 include(CheckLibraryExists)
205 include(CheckSymbolExists)
208 include(FindGraphviz)
212 include(FindLuaSimgrid)
219 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
224 set(Boost_USE_STATIC_LIBS 1)
230 message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
234 find_package(Boost 1.48)
236 include_directories(${Boost_INCLUDE_DIRS})
239 message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
241 message(FATAL_ERROR "Failed to find Boost libraries."
242 "Did you install libboost-dev and libboost-context-dev?"
243 "(libboost-context-dev is optional)"
244 "SimGrid requires Boost >= 1.48.0")
248 #Boost context 1.61 will break compatibility with our implementation.
249 #Warn users about that
250 find_package(Boost 1.61 COMPONENTS context)
252 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
253 message("WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
256 set(HAVE_BOOST_CONTEXTS 0)
258 # Try again to see if we have libboost-context
259 find_package(Boost 1.42 COMPONENTS context)
260 set(Boost_FOUND 1) # We don't care of whether this component is missing
262 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
263 # We should use feature detection for this instead:
264 if (Boost_VERSION LESS 105600)
265 message("Found Boost.Context API v1")
266 set(HAVE_BOOST_CONTEXTS 1)
268 message("Found Boost.Context API v2")
269 set(HAVE_BOOST_CONTEXTS 2)
272 message (" boost : found.")
273 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
274 set(HAVE_BOOST_CONTEXTS 0)
278 # Try again to see if we have libboost-graph
279 #find_package(Boost 1.42 COMPONENTS graph)
280 #set(Boost_FOUND 1) # We don't care of whether this component is missing
282 #if(Boost_FOUND AND Boost_GRAPH_FOUND)
283 # set(HAVE_BOOST_GRAPH 1)
285 # message (" boost : found.")
286 # message (" boost-graph : missing. Install libboost-graph-dev for this optional feature.")
287 # set(HAVE_BOOST_GRAPH 0)
290 # Checks for header libraries functions.
291 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
293 CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
294 if(NOT APPLE) # OS X El Capitan deprecates this function
295 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
297 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
298 set(HAVE_PTHREAD_SETAFFINITY 0)
299 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
301 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
302 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
304 # Use the GNU version of unusual modifiers like PRIx64
305 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
306 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
308 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
311 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
312 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
313 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
314 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
315 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
316 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
317 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
318 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
320 CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
321 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
322 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
323 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
324 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
325 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
326 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
327 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
329 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
331 # The detection of vasprintf fails on MinGW, assumingly because it's
332 # defined as an inline function in stdio.h instead of a regular
333 # function. So force the result to be 1 despite of the test.
334 set(HAVE_VASPRINTF 1)
337 #Check if __thread is defined
339 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
340 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
341 RESULT_VARIABLE HAVE_thread_storage_run)
342 file(REMOVE testprog)
343 if(HAVE_thread_storage_run)
344 set(HAVE_THREAD_LOCAL_STORAGE 1)
346 set(HAVE_THREAD_LOCAL_STORAGE 0)
349 # Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
351 NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND
352 NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND
353 NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND
354 NOT "${CMAKE_SYSTEM}" MATCHES "Darwin")
356 message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
359 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
371 if(enable_mallocators)
372 SET(HAVE_MALLOCATOR 1)
374 SET(HAVE_MALLOCATOR 0)
377 if(enable_model-checking AND HAVE_MMALLOC)
379 include(FindLibunwind)
382 if(enable_model-checking)
383 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
389 if (enable_model-checking AND enable_ns3)
390 message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
395 if("${CMAKE_SYSTEM}" MATCHES "Linux")
397 SET(HAVE_PRIVATIZATION 1)
398 elseif("${CMAKE_SYSTEM}" MATCHES "^FreeBSD")
400 SET(HAVE_PRIVATIZATION 0)
402 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
403 SET(HAVE_PRIVATIZATION 0)
409 #--------------------------------------------------------------------------------------------------
410 ### Check for GNU dynamic linker
411 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
413 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c -ldl -o test_gnu_ld
414 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
415 OUTPUT_VARIABLE HAVE_GNU_LD_compil
417 if(HAVE_GNU_LD_compil)
419 message(STATUS "Warning: test program toward GNU ld failed to compile:")
420 message(STATUS "${HAVE_GNU_LD_comp_output}")
422 execute_process(COMMAND ./test_gnu_ld
423 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
424 RESULT_VARIABLE HAVE_GNU_LD_run
425 OUTPUT_VARIABLE var_exec
428 if(NOT HAVE_GNU_LD_run)
430 message(STATUS "We are using GNU dynamic linker")
433 message(STATUS "Warning: error while checking for GNU ld:")
434 message(STATUS "Test output: '${var_exec}'")
435 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
437 file(REMOVE test_gnu_ld)
441 #--------------------------------------------------------------------------------------------------
442 ### Initialize of CONTEXT THREADS
444 set(HAVE_THREAD_CONTEXTS 0)
446 ### Test that we have a way to create semaphores
448 if(HAVE_SEM_OPEN_LIB)
449 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
450 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
451 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
454 # Test sem_open by compiling:
455 if(HAVE_SEM_OPEN_compil)
457 message(STATUS "Warning: sem_open not compilable")
458 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
461 message(STATUS "sem_open is compilable")
464 # If we're not crosscompiling, we check by executing the program:
465 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
466 execute_process(COMMAND ./sem_open
467 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
468 RESULT_VARIABLE HAVE_SEM_OPEN_run
469 OUTPUT_VARIABLE var_compil
471 if (NOT HAVE_SEM_OPEN_run)
473 message(STATUS "sem_open is executable")
476 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
477 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
479 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
481 message(STATUS "Warning: sem_open not executable")
482 message(STATUS "Compilation output: '${var_compil}'")
483 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
486 file(REMOVE sem_open)
491 if(HAVE_SEM_INIT_LIB)
492 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
493 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
494 RESULT_VARIABLE HAVE_SEM_INIT_run
495 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
497 # Test sem_init by compiling:
498 if(HAVE_SEM_INIT_compil)
500 message(STATUS "Warning: sem_init not compilable")
501 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
504 message(STATUS "sem_init is compilable")
507 # If we're not crosscompiling, we check by executing the program:
508 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
509 execute_process(COMMAND ./sem_init
510 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
511 RESULT_VARIABLE HAVE_SEM_INIT_run
512 OUTPUT_VARIABLE var_compil
514 if (NOT HAVE_SEM_INIT_run)
516 message(STATUS "sem_init is executable")
519 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
520 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
522 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
524 message(STATUS "Warning: sem_init not executable")
525 message(STATUS "Compilation output: '${var_compil}'")
526 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
529 file(REMOVE sem_init)
534 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
535 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
538 set(HAVE_THREAD_CONTEXTS 1)
539 message("-- Support for thread context factory ok.")
542 set(HAVE_UCONTEXT_CONTEXTS 0)
543 if(NOT HAVE_UCONTEXT_H)
544 message("-- No ucontext factory: <ucontext.h> not found.")
546 message("-- No ucontext factory: Apple don't want us to use them.")
547 set(HAVE_UCONTEXT_H 0)
549 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
550 OUTPUT_VARIABLE compile_makecontext_output)
552 #If can have both context
553 if(compile_makecontext)
554 set(HAVE_UCONTEXT_CONTEXTS 1)
555 message("-- Support for ucontext factory ok.")
557 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
558 message("-- No ucontext factory: makecontext() is not compilable.")
561 # Stack setup (size and address)
562 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
563 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
564 RUN_OUTPUT_VARIABLE stack_setup)
566 LIST(LENGTH stack_setup stack_setup_len)
567 if("${stack_setup_len}" STREQUAL "2")
568 LIST(GET stack_setup 0 makecontext_addr)
569 LIST(GET stack_setup 1 makecontext_size)
570 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
571 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
573 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
577 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
578 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
580 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
581 RUN_OUTPUT_VARIABLE stack
582 COPY_FILE test_stackgrowth)
584 if("${stack}" STREQUAL "down")
585 set(PTH_STACKGROWTH "-1")
586 elseif("${stack}" STREQUAL "up")
587 set(PTH_STACKGROWTH "1")
589 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
590 set(PTH_STACKGROWTH "-1")
591 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
592 set(PTH_STACKGROWTH "-1")
594 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
597 # If the test ran well, remove the test binary
598 file(REMOVE test_stackgrowth)
599 #--------------------------------------------------------------------------------------------------
601 ### check for addr2line
602 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
604 set(ADDR2LINE "${ADDR2LINE}/addr2line")
610 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
614 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
615 OUTPUT_VARIABLE remote
616 OUTPUT_STRIP_TRAILING_WHITESPACE)
617 #message(STATUS "Git remote: ${remote}")
618 execute_process(COMMAND git config --get remote.${remote}.url
619 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
621 OUTPUT_STRIP_TRAILING_WHITESPACE)
622 #message(STATUS "Git url: ${url}")
624 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
625 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
626 OUTPUT_VARIABLE GIT_VERSION
627 OUTPUT_STRIP_TRAILING_WHITESPACE)
628 message(STATUS "Git version: ${GIT_VERSION}")
630 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
631 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
632 OUTPUT_VARIABLE GIT_DATE
633 OUTPUT_STRIP_TRAILING_WHITESPACE)
634 message(STATUS "Git date: ${GIT_DATE}")
635 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
637 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
638 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
639 OUTPUT_VARIABLE SIMGRID_GITHASH
640 OUTPUT_STRIP_TRAILING_WHITESPACE)
642 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
643 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
646 ### Generate the required headers and scripts
647 #############################################
649 # gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default,
650 # but this too error prone. If you forget to include the config.h, you get weird segfaults.
651 # If you include it everywhere, everything gets recompiled everytime.
652 # So we include only where needed, and compile with -Wundef to notice the missing includes.
653 # But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H).
654 # So we have to make sure that everything got a decent value before generating the files.
655 foreach(var HAVE_BACKTRACE HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP HAVE_NANOSLEEP HAVE_POPEN
656 HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF
657 HAVE_UCONTEXT_H HAVE_UNISTD_H HAVE_VALGRIND_H HAVE_VASPRINTF)
665 # Avoid triggering a (full) rebuild by touching the files if they did not really change
666 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
667 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
668 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
669 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
670 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
671 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
673 # We need two versions of the SMPI scripts because they contain the path to the library
674 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
676 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
678 ### SMPI script used when simgrid is installed
679 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
680 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
681 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
682 set(libdir ${exec_prefix}/lib)
683 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
685 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
687 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
689 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
690 foreach(script cc cxx ff f90 run)
691 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
694 ### SMPI scripts used when compiling simgrid
695 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
696 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
697 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
698 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
699 set(libdir "${CMAKE_BINARY_DIR}/lib")
700 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
702 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
704 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
706 foreach(script cc cxx ff f90 run)
707 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
711 foreach(script cc cxx ff f90 run)
712 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
713 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
717 set(generated_headers_to_install
718 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
719 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
722 set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
724 set(generated_files_to_clean
726 ${generated_headers_to_install}
727 ${CMAKE_BINARY_DIR}/bin/smpicc
728 ${CMAKE_BINARY_DIR}/bin/smpicxx
729 ${CMAKE_BINARY_DIR}/bin/smpiff
730 ${CMAKE_BINARY_DIR}/bin/smpif90
731 ${CMAKE_BINARY_DIR}/bin/smpirun
732 ${CMAKE_BINARY_DIR}/bin/colorize
733 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
734 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
737 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
738 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
739 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
740 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
741 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
742 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
743 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
744 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
745 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
746 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
747 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
748 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
749 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
750 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
752 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
753 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
754 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
755 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
756 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
757 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
758 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
759 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
761 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
768 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
772 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
777 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
778 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
779 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
780 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
781 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
782 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
783 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
784 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
785 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
786 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
788 set(generated_files_to_clean
789 ${generated_files_to_clean}
790 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
791 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
792 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
793 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
794 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
795 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
796 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
797 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
798 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
799 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
800 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
801 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
802 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
803 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
804 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
805 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
806 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
807 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
808 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
809 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
810 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
812 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
819 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
823 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
828 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
829 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
830 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
831 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
832 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
833 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
834 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
835 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
836 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
837 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
841 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
842 "${generated_files_to_clean}")
844 ### Define source packages for Libs
845 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
847 ### Build some Maintainer files
848 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
849 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
851 ### Setup gcc & clang flags
853 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
858 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
860 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
864 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
868 if(enable_memcheck_xml)
869 set(enable_memcheck true)
874 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
875 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
877 ### Define subdirectories
878 foreach(cmakefile ${CMAKEFILES_TXT})
879 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
880 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
883 ### Setup the distrib
884 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
886 ### Build the docs if asked to
887 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
889 ### Print the result of configuration
891 message("##########################################")
892 message("#### Content of src/internal_config.h ####")
893 message("##########################################")
894 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
895 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
896 foreach(line ${config_output})
899 message("##########################################")
900 message("#### Content of simgrid_config.h ####")
901 message("##########################################")
902 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
903 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
904 foreach(line ${config_output})
907 message("##########################################")
908 message("#### End of configuration headers ####")
909 message("##########################################")
911 message("\nConfiguration of package `simgrid':")
912 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
913 message(" Build Name ..................: ${BUILDNAME}")
914 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
915 message(" Site ........................: ${SITE}")
916 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
918 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
920 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
923 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
924 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
925 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
926 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
927 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
929 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
930 message(" version .............: ${Java_VERSION_STRING}")
932 message(" SWIG ................: Version ${SWIG_VERSION} found.")
934 message(" SWIG ................: Missing.")
937 if(CMAKE_Fortran_COMPILER)
938 message(" Compiler: Fortran ...........: ${SAVED_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
939 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
941 message(" Linker: .....................: ${CMAKE_LINKER}")
942 message(" version .............: ${LINKER_VERSION}")
943 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
945 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
946 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
947 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
948 message(" with LTO ....................: ${enable_lto}")
952 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
954 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
958 message(" Compile Java ................: yes")
959 message(" Native lib in jar .........: ${enable_lib_in_jar}")
961 message(" Compile Java ................: NO")
963 message(" Compile Lua .................: ${HAVE_LUA}")
964 message(" Compile Smpi ................: ${HAVE_SMPI}")
965 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
966 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
967 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
968 message(" PAPI support...............: ${HAVE_PAPI}")
969 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
971 message(" Maintainer mode .............: ${enable_maintainer_mode}")
972 message(" Documentation................: ${enable_documentation}")
973 message(" Model checking ..............: ${HAVE_MC}")
974 message(" Jedule mode ................: ${HAVE_JEDULE}")
975 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
976 message(" Mallocators .................: ${enable_mallocators}")
978 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
981 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
982 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
983 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")