CMakeLists.txt

   1 # Build the version number
   2
   3 set(SIMGRID_VERSION_MAJOR "3")
   4 set(SIMGRID_VERSION_MINOR "26")
   5 set(SIMGRID_VERSION_PATCH "1") # odd => git branch; even => stable release or released snapshot
   6
   7 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
   8   set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
   9 else()
  10   set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
  11 endif()
  12
  13 message(STATUS "Configuring SimGrid v${release_version}")
  14
  15 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}")
  16
  17 set(libsimgrid_version "${release_version}")
  18 set(libsimgrid-java_version "${release_version}")
  19
  20 # Basic checks on cmake
  21 cmake_minimum_required(VERSION 3.5)
  22 #for lto, to avoid warning (should be removed when switching to requiring cmake >= 3.9)
  23 if(NOT CMAKE_VERSION VERSION_LESS "3.9")
  24   cmake_policy(SET CMP0069 NEW)
  25 endif()
  26 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
  27 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
  28
  29 project(simgrid C CXX)
  30
  31 # customizable installation directories
  32 include(GNUInstallDirs)
  33
  34 ## Save compiler flags preset with environment variables CFLAGS or CXXFLAGS;
  35 ## they will used within smpicc, smpicxx.
  36 ## Do it early so that we get their genuine values. The same will be done later for Fortran.
  37 string(REGEX REPLACE " *-f[a-z]+-prefix-map=[^ ]*" "" SMPI_C_FLAGS "${CMAKE_C_FLAGS}")
  38 string(REGEX REPLACE " *-f[a-z]+-prefix-map=[^ ]*" "" SMPI_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
  39
  40 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
  41 #     Check for the compiler        #
  42 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
  43 ##
  44 ## Check the C/C++ standard that we need
  45 ##   See also tools/cmake/Flags.cmake that sets our paranoid warning flags
  46 INCLUDE(CheckCCompilerFlag)
  47 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
  48
  49 ## Request full debugging flags
  50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
  51 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
  52
  53 if (CMAKE_COMPILER_IS_GNUCC)
  54   if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "5.0")
  55     message(FATAL_ERROR
  56             "SimGrid needs at least g++ version 5.0 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
  57             "You need a sufficient support of c++14 to compile SimGrid.")
  58   endif()
  59 endif()
  60
  61 ## We need a decent support of the C++14 and C11 standards
  62 set(CMAKE_CXX_STANDARD 14)
  63 set(CMAKE_CXX_STANDARD_REQUIRED ON)
  64
  65 set(CMAKE_C_STANDARD 11)
  66 set(CMAKE_C_STANDARD_REQUIRED ON)
  67
  68 if (CMAKE_C_COMPILER_ID STREQUAL "Intel" AND CMAKE_C11_EXTENSION_COMPILE_OPTION STREQUAL "-std=c11")
  69   set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
  70 endif()
  71
  72 ### Check threading support
  73 set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
  74 find_package(Threads)
  75
  76 ### Setup Options
  77 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
  78
  79 ### SMPI vs. Fortran
  80 if ((NOT DEFINED enable_smpi) OR enable_smpi)
  81   # First unset the compiler in case we're re-running cmake over a previous
  82   # configuration where it was saved as smpiff
  83   unset(CMAKE_Fortran_COMPILER)
  84
  85   SET(SMPI_FORTRAN 0)
  86   if(enable_fortran)
  87     enable_language(Fortran OPTIONAL)
  88   endif()
  89
  90   if(CMAKE_Fortran_COMPILER)
  91
  92     # Fortran compiler detected: save it, then replace by smpiff
  93     set(SMPI_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
  94
  95         # Set flags/libs to be used in smpiff
  96     if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
  97       set(SMPI_Fortran_FLAGS "\"-fpic\" \"-ff2c\" \"-fno-second-underscore\"")
  98       set(SMPI_Fortran_LIBS "\"-lgfortran\"")
  99       set(SMPI_GFORTRAN 1)
 100     elseif(CMAKE_Fortran_COMPILER_ID MATCHES "Intel")
 101       set(SMPI_Fortran_FLAGS "\"-fPIC\" \"-nofor-main\"")
 102       set(SMPI_Fortran_LIBS "\"-lifcore\"")
 103       set(SMPI_IFORT 1)
 104     elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI|Flang") # flang
 105       set(SMPI_Fortran_FLAGS "\"-fPIC\"")
 106       set(SMPI_Fortran_LIBS "")
 107       set(SMPI_FLANG 1)
 108     endif()
 109     string(REGEX REPLACE " *-f[a-z]+-prefix-map=[^ ]*" "" SMPI_Fortran_FLAGS "${SMPI_Fortran_FLAGS} ${CMAKE_Fortran_FLAGS}")
 110
 111     ## Request debugging flags for Fortran too
 112     set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
 113
 114     set(SMPI_FORTRAN 1)
 115   endif(CMAKE_Fortran_COMPILER)
 116
 117 endif()
 118
 119 ### SET THE LIBRARY EXTENSION
 120 if(APPLE)
 121   set(LIB_EXE "dylib")
 122 elseif(WIN32)
 123   set(LIB_EXE "a")
 124   set(BIN_EXE ".exe")
 125 else()
 126   set(LIB_EXE "so")
 127 endif()
 128
 129 execute_process(COMMAND ${CMAKE_LINKER} -v OUTPUT_VARIABLE LINKER_VERSION ERROR_VARIABLE LINKER_VERSION)
 130 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
 131
 132 ### Find programs and paths
 133 FIND_PROGRAM(GCOV_PATH gcov)
 134 include(FindPerl)
 135 if(NOT PERL_FOUND)
 136   message(FATAL_ERROR "Please install Perl to compile SimGrid.")
 137 endif()
 138
 139 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
 140 if(CMAKE_VERSION VERSION_LESS "3.12")
 141   set(PythonInterp_FIND_VERSION 3)
 142   set(PythonInterp_FIND_VERSION_COUNT 1)
 143   set(PythonInterp_FIND_VERSION_MAJOR 3)
 144   include(FindPythonInterp)
 145   if(NOT PYTHONINTERP_FOUND)
 146     message(FATAL_ERROR "Please install Python (version 3 or higher) to compile SimGrid.")
 147   endif()
 148 else()
 149   find_package(Python3 COMPONENTS Interpreter Development)
 150   if(NOT Python3_Interpreter_FOUND)
 151     message(FATAL_ERROR "Please install Python (version 3 or higher) to compile SimGrid.")
 152   endif()
 153   set(PYTHON_EXECUTABLE ${Python3_EXECUTABLE})
 154 endif()
 155
 156 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
 157
 158 ### Compute the include paths
 159
 160 # Only include public headers by default
 161 include_directories(
 162    ${CMAKE_BINARY_DIR}/include
 163    ${CMAKE_HOME_DIRECTORY}/include
 164 )
 165
 166 # Compute the ones that should be added when compiling the library
 167 set(INTERNAL_INCLUDES
 168   ${CMAKE_BINARY_DIR}
 169   ${CMAKE_HOME_DIRECTORY}
 170   ${CMAKE_HOME_DIRECTORY}/src/include
 171   )
 172
 173 if(enable_smpi)
 174   set (INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_HOME_DIRECTORY}/src/smpi/include)
 175 endif()
 176
 177 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
 178   set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} /usr/include/)
 179 endif()
 180
 181 if(WIN32)
 182   set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
 183   set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
 184   string(REGEX REPLACE "/bin/gcc.*" "/include"  CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
 185   string(REGEX REPLACE "/bin/gcc.*" "/lib"  CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
 186   set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_INCLUDE_WIN})
 187   unset(CMAKE_INCLUDE_WIN)
 188 endif()
 189
 190 # library dependency cannot start with a space (CMP0004), so initialize it with something that is never deactivated.
 191 set(SIMGRID_DEP "-lm")
 192
 193 ### Determine the assembly flavor that we need today
 194 set(HAVE_RAW_CONTEXTS 0)
 195 include(CMakeDetermineSystem)
 196 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
 197   IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
 198     message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
 199     set(SIMGRID_PROCESSOR_i686 1)
 200     set(SIMGRID_PROCESSOR_x86_64 0)
 201   ELSE()
 202     message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
 203     set(SIMGRID_PROCESSOR_i686 0)
 204     set(SIMGRID_PROCESSOR_x86_64 1)
 205   ENDIF()
 206   if (WIN32)
 207     message(STATUS "Disable fast raw contexts on Windows.")
 208   elseif(CMAKE_SIZEOF_VOID_P EQUAL 4 AND CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
 209     message(STATUS "Disable fast raw contexts on x32 ABI.")
 210   else()
 211     set(HAVE_RAW_CONTEXTS 1)
 212   endif()
 213 ELSE()
 214   set(SIMGRID_PROCESSOR_i686 0)
 215   set(SIMGRID_PROCESSOR_x86_64 0)
 216 ENDIF()
 217
 218 include(CheckFunctionExists)
 219 include(CheckTypeSize)
 220 include(CheckIncludeFile)
 221 include(CheckIncludeFiles)
 222 include(CheckLibraryExists)
 223 include(CheckSymbolExists)
 224
 225 set(HAVE_GRAPHVIZ 0)
 226 set(SIMGRID_HAVE_LUA 0)
 227 if(minimal-bindings)
 228   message(STATUS "Don't even look for graphviz nor lua, as we build minimal binding libraries.")
 229 else()
 230   include(FindGraphviz)
 231   if(enable_lua)
 232     include(FindLuaSimgrid)
 233   endif()
 234 endif()
 235
 236 set(SIMGRID_HAVE_NS3 0)
 237 if(enable_ns3)
 238   include(FindNS3)
 239   if (SIMGRID_HAVE_NS3)
 240     if (NS3_VERSION VERSION_LESS "3.28")
 241       message(FATAL_ERROR "SimGrid needs at least ns-3.28. Please upgrade or disable that cmake option.")
 242     endif()
 243     set(SIMGRID_HAVE_NS3 1)
 244     foreach(lib core csma point-to-point internet network applications wifi)
 245       set(SIMGRID_DEP "${SIMGRID_DEP} -lns${NS3_VERSION}-${lib}${NS3_SUFFIX}")
 246     endforeach()
 247   else()
 248     message(FATAL_ERROR "Cannot find ns-3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
 249   endif()
 250 endif()
 251
 252 set(SIMGRID_HAVE_MSG 0)
 253 if(enable_msg)
 254   set(SIMGRID_HAVE_MSG 1)
 255 endif()
 256
 257 if(WIN32)
 258   set(Boost_USE_STATIC_LIBS 1)
 259 endif()
 260
 261 set(HAVE_PAPI 0)
 262 if(enable_smpi_papi)
 263   include(FindPAPI)
 264   if (NOT HAVE_PAPI)
 265     message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
 266   endif()
 267 endif()
 268
 269 # But we do need the core of Boost
 270 # cmake before 3.13.1 does not know about stacktrace components. Fix it.
 271 # Usable components: https://www.boost.org/doc/libs/1_65_1/doc/html/stacktrace/configuration_and_build.html
 272 set(_Boost_STACKTRACE_HEADERS           "boost/stacktrace.hpp")
 273 set(_Boost_STACKTRACE_BACKTRACE_HEADERS "boost/stacktrace.hpp")
 274 set(_Boost_STACKTRACE_ADDR2LINE_HEADERS "boost/stacktrace.hpp")
 275
 276   if(minimal-bindings) # When we want a minimal jarfile, don't even search for boost optional components
 277     message(STATUS "Don't even look for boost optional components, as we build minimal binding libraries.")
 278     find_package(Boost 1.48)
 279   else()
 280     find_package(Boost 1.59 OPTIONAL_COMPONENTS context stacktrace_backtrace stacktrace_addr2line)
 281   endif()
 282   if(Boost_FOUND)
 283     include_directories(${Boost_INCLUDE_DIRS})
 284     message(STATUS "Mandatory components found. SimGrid is compilable.")
 285     if (NOT minimal-bindings)
 286       message(STATUS "Looking for optional Boost components:")
 287       set(Boost_FOUND 1) # These components are optionals
 288       CHECK_INCLUDE_FILE("backtrace.h" HAVE_BACKTRACE_H) # check that backtrace is actually possible
 289       if (Boost_STACKTRACE_BACKTRACE_FOUND AND HAVE_BACKTRACE_H)
 290         message (STATUS "  stacktrace: found the fast 'backtrace' implementation. Activating human-readable stack traces.")
 291         set(HAVE_BOOST_STACKTRACE_BACKTRACE 1)
 292       else()
 293         set(HAVE_BOOST_STACKTRACE_BACKTRACE 0)
 294         if (Boost_STACKTRACE_ADDR2LINE_FOUND)
 295           message (STATUS "  stacktrace: found the slow 'addr2line' implementation. Activating human-readable stack traces.")
 296           set(HAVE_BOOST_STACKTRACE_ADDR2LINE 1)
 297         else()
 298           message (STATUS "  stacktrace: MISSING. Install libboost-stacktrace-dev to display the stacktraces.")
 299           set(HAVE_BOOST_STACKTRACE_ADDR2LINE 0)
 300         endif()
 301       endif()
 302
 303       if(Boost_CONTEXT_FOUND)
 304         message (STATUS "  context: found. Activating Boost contexts.")
 305         set(HAVE_BOOST_CONTEXTS 1)
 306       else()
 307         message (STATUS "  context: MISSING. Install libboost-context-dev for this optional feature.")
 308         set(HAVE_BOOST_CONTEXTS 0)
 309       endif()
 310     endif()
 311   else()
 312     if(APPLE)
 313       message(FATAL_ERROR "Boost libraries not found. Try to install them with 'sudo fink install boost1.53.nopython' (check the exact name with 'fink list boost') or 'sudo brew install boost'")
 314     else()
 315       find_package(Boost 1.48) #try without optional libraries
 316       if(NOT Boost_FOUND)
 317         message(FATAL_ERROR "Boost libraries not found. Install libboost-dev (>= 1.48.0).")
 318       else()
 319         include_directories(${Boost_INCLUDE_DIRS})
 320         message(STATUS "Mandatory components found. SimGrid is compilable.")
 321       endif()
 322     endif()
 323   endif()
 324
 325 # Checks for header libraries functions.
 326 CHECK_LIBRARY_EXISTS(rt      clock_gettime           "" HAVE_POSIX_GETTIME)
 327 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np  "" HAVE_PTHREAD_SETAFFINITY)
 328 CHECK_INCLUDE_FILE("pthread_np.h" HAVE_PTHREAD_NP_H) # for pthread_setaffinity_np() on FreeBSD
 329
 330 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 331   set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
 332 elseif(MINGW)
 333   # Use the GNU version of unusual modifiers like PRIx64
 334   add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
 335   set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
 336 else()
 337   set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
 338 endif()
 339
 340 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
 341 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
 342 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
 343 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
 344 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
 345 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
 346
 347 CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
 348 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
 349 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
 350 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
 351 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
 352 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
 353 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
 354 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
 355
 356 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
 357 if(MINGW)
 358   # The detection of vasprintf fails on MinGW, assumingly because it's
 359   # defined as an inline function in stdio.h instead of a regular
 360   # function. So force the result to be 1 despite of the test.
 361   set(HAVE_VASPRINTF 1)
 362 endif()
 363
 364 CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
 365 CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
 366 if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
 367   set(SG_HAVE_SENDFILE 1)
 368 else()
 369   set(SG_HAVE_SENDFILE 0)
 370 endif()
 371
 372 if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
 373   message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
 374   set(enable_model-checking FALSE)
 375 endif()
 376
 377 if(HAVE_MMAP)
 378   SET(HAVE_MMALLOC 1)
 379 else()
 380   SET(HAVE_MMALLOC 0)
 381   if(enable_model-checking)
 382     message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
 383   endif()
 384   SET(enable_model-checking 0)
 385 endif()
 386
 387 if(enable_jedule)
 388   set(SIMGRID_HAVE_JEDULE 1)
 389 else()
 390   set(SIMGRID_HAVE_JEDULE 0)
 391 endif()
 392
 393 if(enable_mallocators)
 394   SET(SIMGRID_HAVE_MALLOCATOR 1)
 395 else()
 396   SET(SIMGRID_HAVE_MALLOCATOR 0)
 397 endif()
 398
 399 if (minimal-bindings)
 400   message(STATUS "Don't look for libunwind as we build minimal binding libraries.")
 401   if(enable_model-checking)
 402     message(FATAL_ERROR "You cannot enable model-checking and minimal-bindings at the same time.")
 403   endif()
 404 else()
 405   include(FindLibunwind)
 406   if(HAVE_LIBUNWIND)
 407     SET(SIMGRID_DEP "${SIMGRID_DEP} ${LIBUNWIND_LIBRARIES}")
 408   else()
 409     if(enable_model-checking)
 410       message(FATAL_ERROR "Please install libunwind-dev libdw-dev libelf-dev libevent-dev if you want to compile the SimGrid model checker.")
 411     endif()
 412   endif()
 413 endif()
 414
 415 if(enable_model-checking)
 416   find_package(Libdw REQUIRED)
 417   find_package(Libelf REQUIRED)
 418   find_package(Libevent REQUIRED)
 419   include_directories(${LIBDW_INCLUDE_DIR} ${LIBELF_INCLUDE_DIR} ${LIBEVENT_INCLUDE_DIR})
 420   set(SIMGRID_DEP "${SIMGRID_DEP} ${LIBEVENT_LIBRARIES} ${LIBELF_LIBRARIES} ${LIBDW_LIBRARIES}")
 421   set(SIMGRID_HAVE_MC 1)
 422   if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_java)
 423     message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling the Java bindings.")
 424     set(enable_java FALSE)
 425   endif()
 426 else()
 427   SET(SIMGRID_HAVE_MC 0)
 428   set(HAVE_MMALLOC 0)
 429 endif()
 430 mark_as_advanced(PATH_LIBDW_H)
 431 mark_as_advanced(PATH_LIBDW_LIB)
 432
 433 if(enable_java AND NOT enable_msg)
 434   message(FATAL_ERROR "Cannot activate the Java bindings without the MSG module. Either add -Denable_msg=ON or -Denable_java=OFF")
 435 endif()
 436
 437 if (enable_model-checking AND enable_ns3)
 438   message(FATAL_ERROR "Cannot activate both model-checking and ns-3 bindings: ns-3 pulls too much dependencies for the MC to work")
 439 endif()
 440
 441 if(enable_smpi)
 442   SET(HAVE_SMPI 1)
 443   if(WIN32)
 444     message (STATUS "Warning: no support for SMPI automatic privatization on Windows.")
 445     SET(HAVE_PRIVATIZATION 0)
 446   else()
 447     SET(HAVE_PRIVATIZATION 1)
 448   endif()
 449 else()
 450   SET(HAVE_SMPI 0)
 451 endif()
 452
 453 #--------------------------------------------------------------------------------------------------
 454 ### Check what context backends are available
 455
 456 set(HAVE_UCONTEXT_CONTEXTS 0)
 457 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
 458 if(NOT HAVE_UCONTEXT_H)
 459   message(STATUS "No ucontext factory: <ucontext.h> not found.")
 460 elseif(APPLE)
 461   message(STATUS "No ucontext factory: Apple don't want us to use them.")
 462   set(HAVE_UCONTEXT_H 0)
 463 else()
 464   try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
 465     OUTPUT_VARIABLE compile_makecontext_output)
 466
 467   #If can have both context
 468   if(compile_makecontext)
 469     set(HAVE_UCONTEXT_CONTEXTS 1)
 470     message(STATUS "Support for ucontext factory ok.")
 471   else()
 472     message(STATUS "Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
 473     message(STATUS "No ucontext factory: makecontext() is not compilable.")
 474   endif()
 475
 476   # Stack setup (size and address)
 477   try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
 478     ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
 479     RUN_OUTPUT_VARIABLE stack_setup)
 480
 481   LIST(LENGTH stack_setup stack_setup_len)
 482   if("${stack_setup_len}" STREQUAL "2")
 483     LIST(GET stack_setup 0 makecontext_addr)
 484     LIST(GET stack_setup 1 makecontext_size)
 485     set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
 486     set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
 487   else()
 488     message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
 489   endif()
 490 endif()
 491
 492 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
 493 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
 494   ${CMAKE_BINARY_DIR}
 495   ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
 496   RUN_OUTPUT_VARIABLE stack
 497   COPY_FILE test_stackgrowth)
 498
 499 if("${stack}" STREQUAL "down")
 500   set(PTH_STACKGROWTH "-1")
 501 elseif("${stack}" STREQUAL "up")
 502   set(PTH_STACKGROWTH "1")
 503 else()
 504   if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
 505     set(PTH_STACKGROWTH "-1")
 506   elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
 507     set(PTH_STACKGROWTH "-1")
 508   else()
 509     message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
 510   endif()
 511 endif()
 512 # If the test ran well, remove the test binary
 513 file(REMOVE test_stackgrowth)
 514 #--------------------------------------------------------------------------------------------------
 515
 516 ###############
 517 ## GIT version check
 518 ##
 519 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
 520   execute_process(COMMAND git rev-parse --verify --short HEAD
 521      WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}
 522      OUTPUT_VARIABLE GIT_VERSION
 523      OUTPUT_STRIP_TRAILING_WHITESPACE)
 524   # Check for uncommitted changes
 525   execute_process(COMMAND git diff --name-only HEAD
 526     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}
 527     OUTPUT_VARIABLE files_changed)
 528   if(files_changed)
 529     set(GIT_VERSION "${GIT_VERSION}-dirty")
 530   endif()
 531 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
 532   FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
 533 else()
 534   set(GIT_VERSION "none, release version")
 535 endif()
 536 message(STATUS "Git version: ${GIT_VERSION}")
 537
 538 ### Define source packages for Libs
 539 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
 540
 541 ### Setup gcc & clang flags (include after DefinePackage.cmake, and before generating header files)
 542 if (NOT MSVC)
 543   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Flags.cmake)
 544 endif()
 545
 546 ### Generate the required headers and scripts
 547 #############################################
 548
 549 # Avoid triggering a (full) rebuild by touching the files if they did not really change
 550 configure_file("${CMAKE_HOME_DIRECTORY}/src/internal_config.h.in"    "${CMAKE_BINARY_DIR}/src/internal_config.h.generated"    @ONLY IMMEDIATE)
 551 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid/version.h.in" "${CMAKE_BINARY_DIR}/include/simgrid/version.h.generated" @ONLY IMMEDIATE)
 552 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid/config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated" @ONLY IMMEDIATE)
 553 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
 554 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid/version.h.generated ${CMAKE_BINARY_DIR}/include/simgrid/version.h)
 555 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid/config.h)
 556 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
 557 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated)
 558 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid/version.h.generated)
 559
 560 # We need two versions of the SMPI scripts because they contain the path to the library
 561 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
 562
 563 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
 564
 565 ### SMPI script used when simgrid is installed
 566 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
 567 set(includedir "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_INCLUDEDIR}")
 568 set(libdir "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
 569 set(includeflag "-I${includedir} -I${includedir}/smpi")
 570 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${libdir}")
 571 if(NS3_LIBRARY_PATH)
 572   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 573 endif()
 574 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
 575 set(SMPIMAIN ${libdir}/simgrid/smpimain)
 576 set(SMPIREPLAYMAIN ${libdir}/simgrid/smpireplaymain)
 577
 578 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
 579 #configure mpif.f90 to build mpi.mod
 580 if(SMPI_FORTRAN)
 581   set(MODULE_MPIF_IN "module mpi")
 582   set(MODULE_MPIF_OUT "end module mpi")
 583   configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated @ONLY)
 584   execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
 585   set(CMAKE_Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/include/smpi)
 586   add_library(mpi SHARED ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
 587 endif()
 588
 589 foreach(script cc cxx ff f90 run)
 590   configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
 591 endforeach()
 592
 593 ### SMPI scripts used when compiling simgrid
 594 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
 595 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
 596 set(libdir "${CMAKE_BINARY_DIR}/lib")
 597 set(includeflag "-I${includedir} -I${includedir}/smpi")
 598 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
 599 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${libdir}")
 600 if(NS3_LIBRARY_PATH)
 601   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 602 endif()
 603 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
 604 set(SMPIMAIN ${libdir}/simgrid/smpimain)
 605 set(SMPIREPLAYMAIN ${libdir}/simgrid/smpireplaymain)
 606
 607 foreach(script cc cxx ff f90 run)
 608   configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
 609 endforeach()
 610
 611 if(NOT WIN32)
 612   foreach(script cc cxx ff f90 run)
 613     execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
 614     execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
 615   endforeach()
 616 endif()
 617
 618 set(generated_headers_to_install
 619   ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
 620   ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h
 621   ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/version.h
 622   )
 623
 624 set(generated_headers  ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
 625
 626 set(generated_files_to_clean
 627   ${generated_headers}
 628   ${generated_headers_to_install}
 629   ${CMAKE_BINARY_DIR}/bin/smpicc
 630   ${CMAKE_BINARY_DIR}/bin/smpicxx
 631   ${CMAKE_BINARY_DIR}/bin/smpiff
 632   ${CMAKE_BINARY_DIR}/bin/smpif90
 633   ${CMAKE_BINARY_DIR}/bin/smpirun
 634   ${CMAKE_BINARY_DIR}/bin/colorize
 635   ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
 636   ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
 637   )
 638
 639 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
 640   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
 641   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
 642   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allreduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt COPYONLY)
 643   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
 644   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
 645   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
 646   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
 647   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
 648   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
 649   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
 650   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
 651   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
 652   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
 653   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_cluster ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_cluster COPYONLY)
 654   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_coll ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_coll COPYONLY)
 655
 656   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
 657   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
 658   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
 659   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
 660   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
 661   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
 662   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
 663   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
 664   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
 665   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
 666   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
 667   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
 668   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
 669   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
 670   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
 671   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
 672   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
 673   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
 674   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
 675   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
 676   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
 677   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
 678   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
 679   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
 680   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
 681   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
 682   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
 683   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
 684   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
 685   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
 686   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
 687   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
 688   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
 689   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
 690   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
 691
 692 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt COPYONLY)
 693 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt COPYONLY)
 694 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt COPYONLY)
 695 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt COPYONLY)
 696 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt COPYONLY)
 697 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt COPYONLY)
 698 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt COPYONLY)
 699 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt COPYONLY)
 700 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt COPYONLY)
 701 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute COPYONLY)
 702 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive COPYONLY)
 703 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 COPYONLY)
 704 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple COPYONLY)
 705 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time COPYONLY)
 706 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources COPYONLY)
 707
 708   set(generated_files_to_clean
 709     ${generated_files_to_clean}
 710     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
 711     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
 712     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt
 713     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
 714     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
 715     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
 716     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
 717     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
 718     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
 719     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
 720     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
 721     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
 722     ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
 723     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
 724     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
 725     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
 726     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
 727     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
 728     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
 729     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
 730     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
 731     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
 732     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
 733     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
 734     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
 735     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
 736     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
 737     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
 738     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
 739     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
 740     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
 741     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
 742     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
 743     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
 744     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
 745     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
 746     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
 747     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
 748     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
 749     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
 750     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
 751     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
 752     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
 753     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
 754     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
 755     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
 756     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
 757     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
 758     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt
 759     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt
 760     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt
 761     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt
 762     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt
 763     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt
 764     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt
 765     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt
 766     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt
 767     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/replay_multiple_manual.tesh
 768     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute
 769     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive
 770     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2
 771     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple
 772     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty1
 773     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2
 774     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_resources
 775     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time
 776     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time_and_resources
 777     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed1
 778     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2
 779     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_resources
 780     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time
 781     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources
 782     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_nojob
 783     )
 784 endif()
 785
 786 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
 787   "${generated_files_to_clean}")
 788
 789 add_custom_target(tests COMMENT "Recompiling the tests")
 790
 791 ### Build some Maintainer files
 792 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
 793
 794 ### Make Libs
 795 if(NOT WIN32)
 796   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
 797 else()
 798   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
 799 endif()
 800
 801 if(enable_java)
 802   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
 803 endif()
 804
 805 # Python binding (with pybind11)
 806 ################
 807 if((NOT DEFINED enable_python) OR enable_python)
 808   if(EXISTS ${CMAKE_HOME_DIRECTORY}/pybind11) # Try to use a local copy of pybind11, if any
 809     message(STATUS "Use the internal copy of pybind11.")
 810     add_subdirectory(${CMAKE_HOME_DIRECTORY}/pybind11)
 811     set(pybind11_FOUND ON)
 812
 813     set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/pybind11/tools/)
 814     set(Python_ADDITIONAL_VERSIONS 3.9 3.8 3.7 3.6 3.5 3.4)
 815     find_package(PythonLibsNew ${PYBIND11_PYTHON_VERSION} REQUIRED)
 816
 817   else()
 818     find_package(pybind11 CONFIG)
 819     message(STATUS "Pybind11 version: ${pybind11_VERSION}")
 820     if (pybind11_VERSION VERSION_LESS 2.4)
 821       message(STATUS "SimGrid needs at least v2.4 of pybind11. Disabling the Python bindings.")
 822       set(pybind11_FOUND OFF)
 823     endif()
 824   endif()
 825
 826   if(NOT PYTHONLIBS_FOUND AND NOT Python3_Development_FOUND)
 827     message(STATUS "Python libs not found. Turn pybind11 off.")
 828
 829     set(pybind11_FOUND OFF)
 830   endif()
 831 endif()
 832
 833 option(enable_python "Whether the Python bindings are activated." ${pybind11_FOUND}) # ON by default if dependencies are met
 834
 835 if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_model-checking AND enable_python)
 836   message(WARNING "FreeBSD + Model-Checking + Python = too much for now. Disabling the Python bindings.")
 837   set(enable_python FALSE)
 838 endif()
 839
 840 if(enable_python)
 841   if(pybind11_FOUND)
 842     message(STATUS "Found pybind11.")
 843     if(NOT enable_lto)
 844       set(pybind11_options NO_EXTRAS)
 845     endif()
 846     pybind11_add_module(python-bindings src/bindings/python/simgrid_python.cpp ${pybind11_options})
 847     target_compile_features(python-bindings PRIVATE cxx_std_14)
 848     target_link_libraries(python-bindings PUBLIC simgrid)
 849     set_target_properties(python-bindings PROPERTIES
 850                           LIBRARY_OUTPUT_NAME simgrid
 851                           CXX_VISIBILITY_PRESET "default"
 852                           INTERPROCEDURAL_OPTIMIZATION FALSE)
 853     # LTO is disabled here from the python bindings because this makes a
 854     # cmake warning about CMP0069 even when this policy is set. This
 855     # problem may be in cmake, in pybind11 or even in our code, not sure.
 856     # It may get eventually solved in cmake or pybind11. Or not.
 857     # The sure thing is that our python bindings are in one file only,
 858     # so there is no need for LTO here. Problem solved :)
 859
 860     add_dependencies(tests python-bindings)
 861     set_property(TARGET python-bindings
 862                  APPEND PROPERTY INCLUDE_DIRECTORIES "${INTERNAL_INCLUDES}")
 863   else()
 864     message(FATAL_ERROR "Please install pybind11-dev to build the Python bindings (or disable that option).")
 865   endif()
 866 endif()
 867 mark_as_advanced(PYBIND11_PYTHON_VERSION)
 868 mark_as_advanced(pybind11_DIR)
 869
 870 ### Make tests
 871 if(enable_memcheck_xml)
 872   set(enable_memcheck true)
 873 endif()
 874
 875 INCLUDE(CTest)
 876 ENABLE_TESTING()
 877 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
 878 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
 879
 880 ### Define subdirectories
 881 foreach(cmakefile ${CMAKEFILES_TXT})
 882   string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
 883   add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
 884 endforeach()
 885
 886 ### Setup the distrib
 887 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
 888
 889 ### Build the docs if asked to
 890 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
 891
 892 ### Print the result of configuration
 893 message("")
 894 message("##########################################")
 895 message("#### Content of src/internal_config.h ####")
 896 message("##########################################")
 897 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
 898 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
 899 foreach(line ${config_output})
 900   message("   ${line}")
 901 endforeach()
 902 message("##########################################")
 903 message("####   Content of simgrid/config.h    ####")
 904 message("##########################################")
 905 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h config_output)
 906 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
 907 foreach(line ${config_output})
 908   message("   ${line}")
 909 endforeach()
 910 message("##########################################")
 911 message("####   End of configuration headers   ####")
 912 message("##########################################")
 913
 914 message("\nConfiguration of package `simgrid':")
 915 message("        Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
 916 message("        Build Name ..................: ${BUILDNAME}")
 917 message("        Cmake Generator .............: ${CMAKE_GENERATOR}")
 918 message("        Site ........................: ${SITE}")
 919 message("        Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
 920 message("        Release .....................: simgrid-${release_version}")
 921 message("")
 922 message("        Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
 923 message("                version .............: ${CMAKE_C_COMPILER_VERSION}")
 924 message("                is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
 925 message("        Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
 926 message("                version .............: ${CMAKE_CXX_COMPILER_VERSION}")
 927 if(${Java_FOUND})
 928   message("        Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
 929   message("                version .............: ${Java_VERSION_STRING}")
 930   message("                runtime .............: ${Java_JAVA_EXECUTABLE}")
 931 endif()
 932 if(CMAKE_Fortran_COMPILER)
 933   message("        Compiler: Fortran ...........: ${SMPI_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
 934   message("                version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
 935 endif()
 936 message("        Linker: .....................: ${CMAKE_LINKER}")
 937 message("                version .............: ${LINKER_VERSION}")
 938 message("        Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
 939 message("")
 940 message("        CFlags ......................: ${CMAKE_C_FLAGS}")
 941 message("        CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
 942 message("        LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
 943 message("        with LTO ....................: ${enable_lto}")
 944 message("")
 945
 946 if (SIMGRID_HAVE_MSG)
 947   message("        Compile MSG .................: ON")
 948 else()
 949   message("        Compile MSG .................: OFF")
 950 endif()
 951
 952 if (SIMGRID_HAVE_NS3)
 953   message("        Compile ns-3 ................: ON (path: ${NS3_PATH})")
 954 else()
 955   message("        Compile ns-3 ................: OFF  (hint: ${NS3_HINT})")
 956 endif()
 957
 958 if (${Java_FOUND})
 959   message("        Compile Java ................: ON")
 960   message("          Native lib in jar .........: ${enable_lib_in_jar}")
 961 else()
 962   message("        Compile Java ................: OFF")
 963 endif()
 964 if(pybind11_FOUND)
 965   message("        Compile Python bindings .....: ${enable_python}")
 966   message("          module ....................: ${PYTHON_MODULE_PREFIX}simgrid${PYTHON_MODULE_EXTENSION}")
 967 else()
 968   message("        Compile Python bindings .....: OFF (disabled, or pybind11 not found)")
 969 endif()
 970 message("        Compile Lua .................: ${SIMGRID_HAVE_LUA}")
 971 message("        Compile Smpi ................: ${HAVE_SMPI}")
 972 message("          Smpi fortran ..............: ${SMPI_FORTRAN}")
 973 message("          MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
 974 message("          Privatization .............: ${HAVE_PRIVATIZATION}")
 975 message("          PAPI support...............: ${HAVE_PAPI}")
 976 message("        Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
 977 message("")
 978 message("        Maintainer mode .............: ${enable_maintainer_mode}")
 979 message("        Documentation................: ${enable_documentation}")
 980 message("        Model checking ..............: ${SIMGRID_HAVE_MC}")
 981 message("        Jedule  mode ................: ${SIMGRID_HAVE_JEDULE}")
 982 message("        Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
 983 message("        Mallocators .................: ${enable_mallocators}")
 984 message("")
 985 message("        Simgrid dependencies ........: ${SIMGRID_DEP}")
 986 message("")
 987
 988 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
 989 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build  "GIT version : ${GIT_VERSION}\n")
 990 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release     : simgrid-${release_version}\n")
 991
 992 INCLUDE(Dart)