tools/cmake/CompleteInFiles.cmake

   1 set(CMAKE_MODULE_PATH
   2   ${CMAKE_MODULE_PATH}
   3   ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules
   4   )
   5
   6 # x86_64
   7 # x86
   8 # i.86
   9
  10 ### Determine the assembly flavor that we need today
  11 include(CMakeDetermineSystem)
  12 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
  13   IF(${ARCH_32_BITS})
  14     message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
  15     set(PROCESSOR_i686 1)
  16   ELSE()
  17     message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
  18     set(PROCESSOR_x86_64 1)
  19   ENDIF()
  20   if (NOT MSVC)
  21     message(STATUS "Disable fast raw contextes on Microsoft Visual.")
  22   else()
  23     set(HAVE_RAWCTX 1)
  24   endif()
  25
  26 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^alpha")
  27   message(STATUS "System processor: alpha")
  28
  29 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^arm")
  30   # Subdir is "arm" for both big-endian (arm) and little-endian (armel).
  31   message(STATUS "System processor: arm")
  32
  33 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^mips")
  34   # mips* machines are bi-endian mostly so processor does not tell
  35   # endianess of the underlying system.
  36   message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "mips" "mipsel" "mipseb")
  37
  38 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)64")
  39   message(STATUS "System processor: ppc64")
  40
  41 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)")
  42   message(STATUS "System processor: ppc")
  43
  44 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^sparc")
  45   # Both flavours can run on the same processor
  46   message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "sparc" "sparcv9")
  47
  48 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(parisc|hppa)")
  49   message(STATUS "System processor: parisc" "parisc64")
  50
  51 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^s390")
  52   # s390 binaries can run on s390x machines
  53   message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "s390" "s390x")
  54
  55 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^sh")
  56   message(STATUS "System processor: sh")
  57
  58 ELSE() #PROCESSOR NOT FOUND
  59   message(STATUS "PROCESSOR NOT FOUND: ${CMAKE_SYSTEM_PROCESSOR}")
  60
  61 ENDIF()
  62
  63 if(ARCH_32_BITS)
  64   set(MPI_ADDRESS_SIZE 4)
  65 else()
  66   set(MPI_ADDRESS_SIZE 8)
  67 endif()
  68
  69 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}")
  70
  71 include(CheckFunctionExists)
  72 include(CheckTypeSize)
  73 include(CheckIncludeFile)
  74 include(CheckIncludeFiles)
  75 include(CheckLibraryExists)
  76 include(CheckSymbolExists)
  77 include(TestBigEndian)
  78 TEST_BIG_ENDIAN(BIGENDIAN)
  79
  80 include(FindGraphviz)
  81 include(FindLibSigc++)
  82
  83 if(enable_java)
  84   find_package(Java REQUIRED COMPONENTS Runtime Development)
  85   find_package(JNI REQUIRED)
  86   message("-- [Java] JNI found: ${JNI_FOUND}")
  87   message("-- [Java] JNI include dirs: ${JNI_INCLUDE_DIRS}")
  88   if(enable_maintainer_mode)
  89     find_package(SWIG REQUIRED)
  90     include(UseSWIG)
  91     message("-- [Java] Swig found: ${SWIG_FOUND} (version ${SWIG_VERSION})")
  92   endif()
  93   set(HAVE_Java 1)
  94 endif()
  95 if(enable_scala)
  96   find_package(Scala REQUIRED)
  97   message("-- [Scala] scalac found: ${SCALA_COMPILE}")
  98   set(HAVE_Scala 1)
  99 endif()
 100 if(enable_lua)
 101   include(FindLua51Simgrid)
 102 endif()
 103
 104 set(HAVE_NS3 0)
 105 if(enable_ns3)
 106   include(FindNS3)
 107   if (NOT HAVE_NS3)
 108     message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
 109   endif()
 110 endif()
 111
 112 find_package(Boost 1.48)
 113 if(Boost_FOUND)
 114   include_directories(${Boost_INCLUDE_DIRS})
 115 else()
 116   if(APPLE)
 117     message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
 118   else()
 119     message(FATAL_ERROR "Failed to find Boost libraries."
 120                         "Did you install libboost-dev and libboost-context-dev?"
 121                         "(libboost-context-dev is optional)")
 122   endif()
 123 endif()
 124
 125 # Try again to see if we have libboost-context
 126 find_package(Boost 1.42 COMPONENTS context)
 127 set(Boost_FOUND 1) # We don't care of whether this component is missing
 128
 129 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
 130   # We should use feature detection for this instead:
 131   if (Boost_VERSION LESS 105600)
 132     message("Found Boost.Context API v1")
 133     set(HAVE_BOOST_CONTEXT 1)
 134   else()
 135     message("Found Boost.Context API v2")
 136     set(HAVE_BOOST_CONTEXT 2)
 137   endif()
 138 else()
 139   message ("   boost        : found.")
 140   message ("   boost-context: missing. Install libboost-context-dev for this optional feature.")
 141   set(HAVE_BOOST_CONTEXT 0)
 142 endif()
 143
 144 # Checks for header libraries functions.
 145 CHECK_LIBRARY_EXISTS(dl      dlopen                  "" HAVE_DLOPEN_IN_LIBDL)
 146 CHECK_LIBRARY_EXISTS(execinfo backtrace              "" HAVE_BACKTRACE_IN_LIBEXECINFO)
 147 CHECK_LIBRARY_EXISTS(pthread pthread_create          "" HAVE_PTHREAD)
 148 CHECK_LIBRARY_EXISTS(pthread sem_init                "" HAVE_SEM_INIT_LIB)
 149 CHECK_LIBRARY_EXISTS(pthread sem_open                "" HAVE_SEM_OPEN_LIB)
 150 CHECK_LIBRARY_EXISTS(pthread sem_timedwait           "" HAVE_SEM_TIMEDWAIT_LIB)
 151 CHECK_LIBRARY_EXISTS(pthread pthread_mutex_timedlock "" HAVE_MUTEX_TIMEDLOCK_LIB)
 152 CHECK_LIBRARY_EXISTS(rt      clock_gettime           "" HAVE_POSIX_GETTIME)
 153
 154 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 155   set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
 156 elseif(MINGW)
 157   add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
 158   set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
 159 else()
 160   set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
 161 endif()
 162
 163 CHECK_INCLUDE_FILES("time.h;sys/time.h" TIME_WITH_SYS_TIME)
 164 CHECK_INCLUDE_FILES("stdlib.h;stdarg.h;string.h;float.h" STDC_HEADERS)
 165 CHECK_INCLUDE_FILE("pthread.h" HAVE_PTHREAD_H)
 166 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_VALGRIND_H)
 167 CHECK_INCLUDE_FILE("socket.h" HAVE_SOCKET_H)
 168 CHECK_INCLUDE_FILE("sys/socket.h" HAVE_SYS_SOCKET_H)
 169 CHECK_INCLUDE_FILE("stat.h" HAVE_STAT_H)
 170 CHECK_INCLUDE_FILE("sys/stat.h" HAVE_SYS_STAT_H)
 171 CHECK_INCLUDE_FILE("windows.h" HAVE_WINDOWS_H)
 172 CHECK_INCLUDE_FILE("winsock.h" HAVE_WINSOCK_H)
 173 CHECK_INCLUDE_FILE("winsock2.h" HAVE_WINSOCK2_H)
 174 CHECK_INCLUDE_FILE("windef.h" HAVE_WINDEF_H)
 175 CHECK_INCLUDE_FILE("errno.h" HAVE_ERRNO_H)
 176 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
 177 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
 178 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
 179 CHECK_INCLUDE_FILE("sys/time.h" HAVE_SYS_TIME_H)
 180 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
 181 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
 182 CHECK_INCLUDE_FILE("time.h" HAVE_TIME_H)
 183 CHECK_INCLUDE_FILE("inttypes.h" HAVE_INTTYPES_H)
 184 CHECK_INCLUDE_FILE("memory.h" HAVE_MEMORY_H)
 185 CHECK_INCLUDE_FILE("stdlib.h" HAVE_STDLIB_H)
 186 CHECK_INCLUDE_FILE("strings.h" HAVE_STRINGS_H)
 187 CHECK_INCLUDE_FILE("string.h" HAVE_STRING_H)
 188 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
 189 CHECK_INCLUDE_FILE("stdio.h" HAVE_STDIO_H)
 190 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
 191
 192 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
 193 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
 194 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
 195 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
 196 CHECK_FUNCTION_EXISTS(readv HAVE_READV)
 197 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
 198 CHECK_FUNCTION_EXISTS(signal HAVE_SIGNAL)
 199
 200 CHECK_SYMBOL_EXISTS(snprintf stdio.h HAVE_SNPRINTF)
 201 CHECK_SYMBOL_EXISTS(vsnprintf stdio.h HAVE_VSNPRINTF)
 202 CHECK_SYMBOL_EXISTS(asprintf stdio.h HAVE_ASPRINTF)
 203 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
 204
 205 CHECK_FUNCTION_EXISTS(makecontext HAVE_MAKECONTEXT)
 206 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
 207 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
 208 CHECK_FUNCTION_EXISTS(strdup SIMGRID_HAVE_STRDUP)
 209 CHECK_FUNCTION_EXISTS(_strdup SIMGRID_HAVE__STRDUP)
 210
 211 #Check if __thread is defined
 212 execute_process(
 213   COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c"
 214   WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 215   RESULT_VARIABLE HAVE_thread_storage_run
 216   )
 217
 218 if(HAVE_thread_storage_run)
 219   set(HAVE_THREAD_LOCAL_STORAGE 1)
 220 else()
 221   set(HAVE_THREAD_LOCAL_STORAGE 0)
 222 endif()
 223
 224 # Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
 225 IF(NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND NOT  "${CMAKE_SYSTEM}" MATCHES "Darwin")
 226   SET(HAVE_MMAP 0)
 227   message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
 228 ENDIF()
 229
 230 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
 231   SET(HAVE_MMALLOC 1)
 232 else()
 233   SET(HAVE_MMALLOC 0)
 234 endif()
 235
 236
 237 if(WIN32) #THOSE FILES ARE FUNCTIONS ARE NOT DETECTED BUT THEY SHOULD...
 238   set(HAVE_UCONTEXT_H 1)
 239   set(HAVE_MAKECONTEXT 1)
 240   set(HAVE_SNPRINTF 1)
 241   set(HAVE_VSNPRINTF 1)
 242 endif()
 243
 244 set(CONTEXT_UCONTEXT 0)
 245 SET(CONTEXT_THREADS 0)
 246
 247 if(enable_jedule)
 248   SET(HAVE_JEDULE 1)
 249 endif()
 250
 251 if(enable_latency_bound_tracking)
 252   SET(HAVE_LATENCY_BOUND_TRACKING 1)
 253 else()
 254   SET(HAVE_LATENCY_BOUND_TRACKING 0)
 255 endif()
 256
 257 if(enable_mallocators)
 258   SET(MALLOCATOR_IS_WANTED 1)
 259 else()
 260   SET(MALLOCATOR_IS_WANTED 0)
 261 endif()
 262
 263 if(enable_model-checking AND HAVE_MMALLOC)
 264   SET(HAVE_MC 1)
 265   SET(MMALLOC_WANT_OVERRIDE_LEGACY 1)
 266   include(FindLibunwind)
 267   include(FindLibdw)
 268 else()
 269   if(enable_model-checking)
 270     message(STATUS "Warning: support for model-checking has been disabled because HAVE_MMALLOC is false")
 271   endif()
 272   SET(HAVE_MC 0)
 273   SET(HAVE_MMALLOC 0)
 274   SET(MMALLOC_WANT_OVERRIDE_LEGACY 0)
 275 endif()
 276
 277 if(enable_smpi)
 278   include(FindGFortran)
 279   #really checks for objdump for privatization
 280   find_package(BinUtils QUIET)
 281   SET(HAVE_SMPI 1)
 282
 283   if( NOT "${CMAKE_OBJDUMP}" MATCHES "CMAKE_OBJDUMP-NOTFOUND" AND HAVE_MMAP)
 284     SET(HAVE_PRIVATIZATION 1)
 285   else()
 286     SET(HAVE_PRIVATIZATION 0)
 287   endif()
 288 endif()
 289
 290 #--------------------------------------------------------------------------------------------------
 291 ### Check for some architecture dependent values
 292 CHECK_TYPE_SIZE(int SIZEOF_INT)
 293 CHECK_TYPE_SIZE(void* SIZEOF_VOIDP)
 294
 295 #--------------------------------------------------------------------------------------------------
 296 ### Check for GNU dynamic linker
 297 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
 298 if (HAVE_DLFCN_H)
 299     if(HAVE_DLOPEN_IN_LIBDL)
 300       set(DL_LIBRARY "-ldl")
 301     endif(HAVE_DLOPEN_IN_LIBDL)
 302     execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
 303       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 304       OUTPUT_VARIABLE HAVE_GNU_LD_compil
 305     )
 306     if(HAVE_GNU_LD_compil)
 307       set(HAVE_GNU_LD 0)
 308       message(STATUS "Warning: test program toward GNU ld failed to compile:")
 309       message(STATUS "${HAVE_GNU_LD_comp_output}")
 310     else()
 311
 312       execute_process(COMMAND ./test_gnu_ld
 313           WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 314           RESULT_VARIABLE HAVE_GNU_LD_run
 315           OUTPUT_VARIABLE var_exec
 316       )
 317
 318       if(NOT HAVE_GNU_LD_run)
 319         set(HAVE_GNU_LD 1)
 320         message(STATUS "We are using GNU dynamic linker")
 321       else()
 322         set(HAVE_GNU_LD 0)
 323         message(STATUS "Warning: error while checking for GNU ld:")
 324         message(STATUS "Test output: '${var_exec}'")
 325         message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
 326       endif()
 327       file(REMOVE test_gnu_ld)
 328     endif()
 329 endif()
 330
 331
 332 #--------------------------------------------------------------------------------------------------
 333 ### Initialize of CONTEXT THREADS
 334
 335 if(HAVE_PTHREAD)
 336   set(pthread 1)
 337 elseif(pthread)
 338   set(pthread 0)
 339 endif()
 340
 341 if(HAVE_PTHREAD)
 342   ### Test that we have a way to create semaphores
 343
 344   if(HAVE_SEM_OPEN_LIB)
 345     execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
 346     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 347     OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
 348     )
 349
 350     # Test sem_open by compiling:
 351     if(HAVE_SEM_OPEN_compil)
 352       set(HAVE_SEM_OPEN 0)
 353       message(STATUS "Warning: sem_open not compilable")
 354       message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
 355     else()
 356       set(HAVE_SEM_OPEN 1)
 357       message(STATUS "sem_open is compilable")
 358     endif()
 359
 360     # If we're not crosscompiling, we check by executing the program:
 361     if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
 362       execute_process(COMMAND ./sem_open
 363       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 364       RESULT_VARIABLE HAVE_SEM_OPEN_run
 365       OUTPUT_VARIABLE var_compil
 366       )
 367       if (NOT HAVE_SEM_OPEN_run)
 368         set(HAVE_SEM_OPEN 1)
 369         message(STATUS "sem_open is executable")
 370       else()
 371         set(HAVE_SEM_OPEN 0)
 372         if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
 373           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
 374         else()
 375           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
 376         endif()
 377         message(STATUS "Warning: sem_open not executable")
 378         message(STATUS "Compilation output: '${var_compil}'")
 379         message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
 380       endif()
 381     endif()
 382     file(REMOVE sem_open)
 383
 384   else()
 385     set(HAVE_SEM_OPEN 0)
 386   endif()
 387
 388   if(HAVE_SEM_INIT_LIB)
 389     execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
 390     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 391     RESULT_VARIABLE HAVE_SEM_INIT_run OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
 392
 393     # Test sem_init by compiling:
 394     if(HAVE_SEM_INIT_compil)
 395       set(HAVE_SEM_INIT 0)
 396       message(STATUS "Warning: sem_init not compilable")
 397       message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
 398     else()
 399       set(HAVE_SEM_INIT 1)
 400       message(STATUS "sem_init is compilable")
 401     endif()
 402
 403     # If we're not crosscompiling, we check by executing the program:
 404     if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
 405       execute_process(COMMAND ./sem_init
 406       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 407       RESULT_VARIABLE HAVE_SEM_INIT_run
 408       OUTPUT_VARIABLE var_compil
 409       )
 410       if (NOT HAVE_SEM_INIT_run)
 411         set(HAVE_SEM_INIT 1)
 412         message(STATUS "sem_init is executable")
 413       else()
 414         set(HAVE_SEM_INIT 0)
 415         if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
 416           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
 417         else()
 418           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
 419         endif()
 420         message(STATUS "Warning: sem_init not executable")
 421         message(STATUS "Compilation output: '${var_compil}'")
 422         message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
 423       endif()
 424     endif()
 425     file(REMOVE sem_init)
 426   endif()
 427
 428   if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
 429     message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
 430   endif()
 431
 432   ### Test that we have a way to timewait for semaphores
 433
 434   if(HAVE_SEM_TIMEDWAIT_LIB)
 435
 436     execute_process(
 437       COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_timedwait.c -lpthread"
 438       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 439       OUTPUT_VARIABLE HAVE_SEM_TIMEDWAIT_run
 440       )
 441
 442     if(HAVE_SEM_TIMEDWAIT_run)
 443       set(HAVE_SEM_TIMEDWAIT 0)
 444       message(STATUS "timedwait not compilable")
 445     else()
 446       set(HAVE_SEM_TIMEDWAIT 1)
 447       message(STATUS "timedwait is compilable")
 448     endif()
 449   endif()
 450
 451   ### HAVE_MUTEX_TIMEDLOCK
 452
 453   if(HAVE_MUTEX_TIMEDLOCK_LIB)
 454
 455     execute_process(
 456       COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_mutex_timedlock.c -lpthread"
 457       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 458       OUTPUT_VARIABLE HAVE_MUTEX_TIMEDLOCK_run
 459       )
 460
 461     if(HAVE_MUTEX_TIMEDLOCK_run)
 462       set(HAVE_MUTEX_TIMEDLOCK 0)
 463       message(STATUS "timedlock not compilable")
 464     else()
 465       message(STATUS "timedlock is compilable")
 466       set(HAVE_MUTEX_TIMEDLOCK 1)
 467     endif()
 468   endif()
 469 endif()
 470
 471 # This is needed for ucontext on MacOS X:
 472 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 473   add_definitions(-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE)
 474 endif()
 475
 476 if(WIN32)
 477   # We always provide our own implementation of ucontext on Windows.
 478   try_compile(HAVE_UCONTEXT
 479     ${CMAKE_BINARY_DIR}
 480     ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_AC_CHECK_MCSC.c
 481     COMPILE_DEFINITIONS _XBT_WIN32
 482     INCLUDE_DIRECTORIES
 483       ${CMAKE_HOME_DIRECTORY}/src/include
 484       ${CMAKE_HOME_DIRECTORY}/src/xbt
 485   )
 486 else()
 487   # We always provide our own implementation of ucontext on Windows.
 488   try_compile(HAVE_UCONTEXT
 489     ${CMAKE_BINARY_DIR}
 490     ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_AC_CHECK_MCSC.c)
 491 endif()
 492
 493 #If can have both context
 494
 495 if(HAVE_UCONTEXT)
 496   set(CONTEXT_UCONTEXT 1)
 497   message("-- Support for ucontext factory")
 498 endif()
 499
 500 if(HAVE_PTHREAD)
 501   set(CONTEXT_THREADS 1)
 502   message("-- Support for thread context factory")
 503 endif()
 504
 505 ###############
 506 ## GIT version check
 507 ##
 508 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
 509   execute_process(COMMAND git remote
 510   COMMAND head -n 1
 511   WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 512   OUTPUT_VARIABLE remote
 513   RESULT_VARIABLE ret
 514   )
 515   string(REPLACE "\n" "" remote "${remote}")
 516   #message(STATUS "Git remote: ${remote}")
 517   execute_process(COMMAND git config --get remote.${remote}.url
 518   WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 519   OUTPUT_VARIABLE url
 520   RESULT_VARIABLE ret
 521   )
 522   string(REPLACE "\n" "" url "${url}")
 523   #message(STATUS "Git url: ${url}")
 524   if(url)
 525     execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
 526     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 527     OUTPUT_VARIABLE GIT_VERSION
 528     RESULT_VARIABLE ret
 529     )
 530     string(REPLACE "\n" "" GIT_VERSION "${GIT_VERSION}")
 531     message(STATUS "Git version: ${GIT_VERSION}")
 532     execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
 533     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 534     OUTPUT_VARIABLE GIT_DATE
 535     RESULT_VARIABLE ret
 536     )
 537     string(REPLACE "\n" "" GIT_DATE "${GIT_DATE}")
 538     message(STATUS "Git date: ${GIT_DATE}")
 539     string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
 540
 541     execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
 542                     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 543                     OUTPUT_VARIABLE SIMGRID_GITHASH
 544                     RESULT_VARIABLE ret
 545                     )
 546     string(REPLACE "\n" "" SIMGRID_GITHASH "${SIMGRID_GITHASH}")
 547
 548   endif()
 549 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
 550   FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
 551 endif()
 552
 553 if(release)
 554   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nRelease build")
 555 else()
 556   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nDevelopment build")
 557 endif()
 558 if(GIT_VERSION)
 559   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} at commit ${GIT_VERSION}")
 560 endif()
 561 if(GIT_DATE)
 562   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} (${GIT_DATE})")
 563 endif()
 564 #--------------------------------------------------------------------------------------------------
 565
 566 set(makecontext_CPPFLAGS_2 "")
 567 if(HAVE_MAKECONTEXT OR WIN32)
 568   set(makecontext_CPPFLAGS "-DTEST_makecontext")
 569   if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 570     set(makecontext_CPPFLAGS_2 "-D_XOPEN_SOURCE=700")
 571   endif()
 572
 573   if(WIN32)
 574     if(ARCH_32_BITS)
 575       set(makecontext_CPPFLAGS "-DTEST_makecontext -D_I_X86_")
 576     else()
 577       set(makecontext_CPPFLAGS "-DTEST_makecontext -D_AMD64_")
 578     endif()
 579     set(makecontext_CPPFLAGS_2 "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/src/include -I${CMAKE_HOME_DIRECTORY}/src/xbt")
 580   endif()
 581
 582   file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
 583
 584   if(CMAKE_CROSSCOMPILING)
 585     set(RUN_makecontext_VAR "cross")
 586     set(COMPILE_makecontext_VAR "cross")
 587   else()
 588     try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
 589       ${CMAKE_BINARY_DIR}
 590       ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
 591       COMPILE_DEFINITIONS "${makecontext_CPPFLAGS} ${makecontext_CPPFLAGS_2}"
 592       )
 593   endif()
 594
 595   if(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
 596     file(READ ${CMAKE_BINARY_DIR}/conftestval MAKECONTEXT_ADDR_SIZE)
 597     string(REPLACE "\n" "" MAKECONTEXT_ADDR_SIZE "${MAKECONTEXT_ADDR_SIZE}")
 598     string(REGEX MATCH ;^.*,;MAKECONTEXT_ADDR "${MAKECONTEXT_ADDR_SIZE}")
 599     string(REGEX MATCH ;,.*$; MAKECONTEXT_SIZE "${MAKECONTEXT_ADDR_SIZE}")
 600     string(REPLACE "," "" makecontext_addr "${MAKECONTEXT_ADDR}")
 601     string(REPLACE "," "" makecontext_size "${MAKECONTEXT_SIZE}")
 602     set(pth_skaddr_makecontext "#define pth_skaddr_makecontext(skaddr,sksize) (${makecontext_addr})")
 603     set(pth_sksize_makecontext "#define pth_sksize_makecontext(skaddr,sksize) (${makecontext_size})")
 604     message(STATUS "${pth_skaddr_makecontext}")
 605     message(STATUS "${pth_sksize_makecontext}")
 606   else()
 607     # message(FATAL_ERROR "makecontext is not compilable")
 608   endif()
 609 endif()
 610
 611 #--------------------------------------------------------------------------------------------------
 612
 613 ### check for stackgrowth
 614 if (NOT CMAKE_CROSSCOMPILING)
 615   try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
 616     ${CMAKE_BINARY_DIR}
 617     ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
 618     RUN_OUTPUT_VARIABLE stack
 619     )
 620 endif()
 621 if("${stack}" STREQUAL "down")
 622   set(PTH_STACKGROWTH "-1")
 623 elseif("${stack}" STREQUAL "up")
 624   set(PTH_STACKGROWTH "1")
 625 else()
 626   if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
 627     set(PTH_STACKGROWTH "-1")
 628   elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
 629     set(PTH_STACKGROWTH "-1")
 630   else()
 631     message(ERROR "Could not figure the stack direction.")
 632   endif()
 633 endif()
 634
 635 ###############
 636 ## System checks
 637 ##
 638
 639 #SG_CONFIGURE_PART([System checks...])
 640 #AC_PROG_CC(xlC gcc cc) -auto
 641 #AM_SANITY_CHECK -auto
 642
 643 #AC_PROG_MAKE_SET
 644
 645 #AC_CHECK_VA_COPY
 646
 647 set(diff_va "va_copy((d),(s))"
 648   "VA_COPY((d),(s))"
 649   "__va_copy((d),(s))"
 650   "__builtin_va_copy((d),(s))"
 651   "do { (d) = (s)\; } while (0)"
 652   "do { *(d) = *(s)\; } while (0)"
 653   "memcpy((void *)&(d), (void *)&(s), sizeof(s))"
 654   "memcpy((void *)(d), (void *)(s), sizeof(*(s)))"
 655   )
 656
 657 foreach(fct ${diff_va})
 658   write_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_va_copy.c" "#include <stdlib.h>
 659 #include <stdarg.h>
 660 #include <string.h>
 661 #define DO_VA_COPY(d,s) ${fct}
 662 void test(char *str, ...)
 663 {
 664   va_list ap, ap2;
 665   int i;
 666   va_start(ap, str);
 667   DO_VA_COPY(ap2, ap);
 668   for (i = 1; i <= 9; i++) {
 669     int k = (int)va_arg(ap, int);
 670     if (k != i)
 671       abort();
 672   }
 673   DO_VA_COPY(ap, ap2);
 674   for (i = 1; i <= 9; i++) {
 675     int k = (int)va_arg(ap, int);
 676     if (k != i)
 677       abort();
 678   }
 679   va_end(ap);
 680 }
 681 int main(void)
 682 {
 683   test(\"test\", 1, 2, 3, 4, 5, 6, 7, 8, 9);
 684   exit(0);
 685 }"
 686     )
 687
 688   execute_process(
 689   COMMAND ${CMAKE_C_COMPILER} "${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_va_copy.c"
 690   WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 691   RESULT_VARIABLE COMPILE_VA_NULL_VAR
 692   OUTPUT_QUIET
 693   ERROR_QUIET
 694   )
 695
 696   if(NOT COMPILE_VA_NULL_VAR)
 697     string(REGEX REPLACE "\;" "" fctbis ${fct})
 698     if(${fctbis} STREQUAL "va_copy((d),(s))")
 699       set(HAVE_VA_COPY 1)
 700       set(ac_cv_va_copy "C99")
 701       set(__VA_COPY_USE_C99 "va_copy((d),(s))")
 702     endif()
 703
 704     if(${fctbis} STREQUAL "VA_COPY((d),(s))")
 705       set(ac_cv_va_copy "GCM")
 706       set(__VA_COPY_USE_GCM "VA_COPY((d),(s))")
 707     endif()
 708
 709     if(${fctbis} STREQUAL "__va_copy((d),(s))")
 710       set(ac_cv_va_copy "GCH")
 711       set(__VA_COPY_USE_GCH "__va_copy((d),(s))")
 712     endif()
 713
 714     if(${fctbis} STREQUAL "__builtin_va_copy((d),(s))")
 715       set(ac_cv_va_copy "GCB")
 716       set(__VA_COPY_USE_GCB "__builtin_va_copy((d),(s))")
 717     endif()
 718
 719     if(${fctbis} STREQUAL "do { (d) = (s) } while (0)")
 720       set(ac_cv_va_copy "ASS")
 721       set(__VA_COPY_USE_ASS "do { (d) = (s); } while (0)")
 722     endif()
 723
 724     if(${fctbis} STREQUAL "do { *(d) = *(s) } while (0)")
 725       set(ac_cv_va_copy "ASP")
 726       set(__VA_COPY_USE_ASP "do { *(d) = *(s); } while (0)")
 727     endif()
 728
 729     if(${fctbis} STREQUAL "memcpy((void *)&(d), (void *)&(s), sizeof(s))")
 730       set(ac_cv_va_copy "CPS")
 731       set(__VA_COPY_USE_CPS "memcpy((void *)&(d), (void *)&(s), sizeof(s))")
 732     endif()
 733
 734     if(${fctbis} STREQUAL "memcpy((void *)(d), (void *)(s), sizeof(*(s)))")
 735       set(ac_cv_va_copy "CPP")
 736       set(__VA_COPY_USE_CPP "memcpy((void *)(d), (void *)(s), sizeof(*(s)))")
 737     endif()
 738
 739     if(NOT STATUS_OK)
 740       set(__VA_COPY_USE "__VA_COPY_USE_${ac_cv_va_copy}(d, s)")
 741     endif()
 742     set(STATUS_OK "1")
 743
 744   endif()
 745
 746 endforeach(fct ${diff_va})
 747
 748 #--------------------------------------------------------------------------------------------------
 749 ### check for a working snprintf
 750 if(HAVE_SNPRINTF AND HAVE_VSNPRINTF OR WIN32)
 751   if(WIN32)
 752     #set(HAVE_SNPRINTF 1)
 753     #set(HAVE_VSNPRINTF 1)
 754   endif()
 755
 756   if(CMAKE_CROSSCOMPILING)
 757     set(RUN_SNPRINTF_FUNC "cross")
 758     #set(PREFER_PORTABLE_SNPRINTF 1)
 759   else()
 760     try_run(RUN_SNPRINTF_FUNC_VAR COMPILE_SNPRINTF_FUNC_VAR
 761       ${CMAKE_BINARY_DIR}
 762       ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_snprintf.c
 763       )
 764   endif()
 765
 766   if(CMAKE_CROSSCOMPILING)
 767     set(RUN_VSNPRINTF_FUNC "cross")
 768     set(PREFER_PORTABLE_VSNPRINTF 1)
 769   else()
 770     try_run(RUN_VSNPRINTF_FUNC_VAR COMPILE_VSNPRINTF_FUNC_VAR
 771       ${CMAKE_BINARY_DIR}
 772       ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_vsnprintf.c
 773       )
 774   endif()
 775
 776   set(PREFER_PORTABLE_SNPRINTF 0)
 777   if(RUN_VSNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
 778     set(PREFER_PORTABLE_SNPRINTF 1)
 779   endif()
 780   if(RUN_SNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
 781     set(PREFER_PORTABLE_SNPRINTF 1)
 782   endif()
 783 endif()
 784
 785 ### check for asprintf function familly
 786 if(HAVE_ASPRINTF)
 787   SET(simgrid_need_asprintf "")
 788   SET(NEED_ASPRINTF 0)
 789 else()
 790   SET(simgrid_need_asprintf "#define SIMGRID_NEED_ASPRINTF 1")
 791   SET(NEED_ASPRINTF 1)
 792 endif()
 793
 794 if(HAVE_VASPRINTF)
 795   SET(simgrid_need_vasprintf "")
 796   SET(NEED_VASPRINTF 0)
 797 else()
 798   SET(simgrid_need_vasprintf "#define SIMGRID_NEED_VASPRINTF 1")
 799   SET(NEED_VASPRINTF 1)
 800 endif()
 801
 802 ### check for addr2line
 803
 804 find_path(ADDR2LINE NAMES addr2line     PATHS NO_DEFAULT_PATHS  )
 805 if(ADDR2LINE)
 806   set(ADDR2LINE "${ADDR2LINE}/addr2line")
 807 endif()
 808
 809 ### File to create
 810
 811 configure_file("${CMAKE_HOME_DIRECTORY}/src/context_sysv_config.h.in"
 812   "${CMAKE_BINARY_DIR}/src/context_sysv_config.h" @ONLY IMMEDIATE)
 813
 814 SET( CMAKEDEFINE "#cmakedefine" )
 815 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
 816 configure_file("${CMAKE_BINARY_DIR}/src/internal_config.h" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
 817 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h" @ONLY IMMEDIATE)
 818
 819 set(top_srcdir "${CMAKE_HOME_DIRECTORY}")
 820 set(srcdir "${CMAKE_HOME_DIRECTORY}/src")
 821 set(bindir "${CMAKE_BINARY_DIR}")
 822
 823 ### Script used when simgrid is installed
 824 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
 825 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
 826 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
 827 set(libdir ${exec_prefix}/lib)
 828 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
 829 if(NS3_LIBRARY_PATH)
 830   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 831 endif()
 832 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
 833
 834 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH)
 835 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
 836 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/bin/smpicc @ONLY)
 837 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/bin/smpicxx @ONLY)
 838 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/bin/smpiff @ONLY)
 839 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/bin/smpif90 @ONLY)
 840 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/bin/smpirun @ONLY)
 841
 842 ### Script used when simgrid is compiling
 843 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
 844 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
 845 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
 846 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
 847 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
 848 if(NS3_LIBRARY_PATH)
 849   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 850 endif()
 851 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
 852 set(libdir "${CMAKE_BINARY_DIR}/lib")
 853
 854 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc @ONLY)
 855 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx @ONLY)
 856 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff @ONLY)
 857 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90 @ONLY)
 858 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun @ONLY)
 859
 860 set(top_builddir ${CMAKE_HOME_DIRECTORY})
 861
 862 if(NOT WIN32)
 863   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicc)
 864   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicxx)
 865   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpiff)
 866   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpif90)
 867   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpirun)
 868   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc)
 869   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx)
 870   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff)
 871   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90)
 872   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun)
 873 endif()
 874
 875 set(generated_headers_to_install
 876   ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
 877   ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
 878   )
 879
 880 set(generated_headers
 881   ${CMAKE_CURRENT_BINARY_DIR}/src/context_sysv_config.h
 882   ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h
 883   )
 884
 885 set(generated_files_to_clean
 886   ${generated_headers}
 887   ${generated_headers_to_install}
 888   ${CMAKE_BINARY_DIR}/bin/smpicc
 889   ${CMAKE_BINARY_DIR}/bin/smpicxx
 890   ${CMAKE_BINARY_DIR}/bin/smpiff
 891   ${CMAKE_BINARY_DIR}/bin/smpif90
 892   ${CMAKE_BINARY_DIR}/bin/smpirun
 893   ${CMAKE_BINARY_DIR}/bin/colorize
 894   ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
 895   ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
 896   )
 897
 898 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
 899   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
 900   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
 901   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
 902   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
 903   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
 904   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
 905   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
 906   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
 907   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
 908   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
 909   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
 910   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
 911   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
 912
 913   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
 914   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
 915   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
 916   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
 917   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
 918   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
 919   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
 920   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
 921   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
 922   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
 923   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
 924   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
 925   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
 926   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
 927   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
 928   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
 929   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
 930   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
 931   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
 932   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
 933   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
 934   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
 935   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
 936   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
 937   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
 938   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
 939   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
 940   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
 941   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
 942   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
 943   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
 944   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
 945   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
 946   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
 947   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
 948
 949   set(generated_files_to_clean
 950     ${generated_files_to_clean}
 951     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
 952     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
 953     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
 954     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
 955     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
 956     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
 957     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
 958     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
 959     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
 960     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
 961     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
 962     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
 963     ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
 964     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
 965     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
 966     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
 967     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
 968     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
 969     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
 970     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
 971     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
 972     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
 973     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
 974     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
 975     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
 976     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
 977     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
 978     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
 979     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
 980     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
 981     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
 982     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
 983     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
 984     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
 985     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
 986     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
 987     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
 988     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
 989     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
 990     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
 991     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
 992     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
 993     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
 994     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
 995     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
 996     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
 997     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
 998     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
 999     )
1000 endif()
1001
1002 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
1003   "${generated_files_to_clean}")
1004
1005 IF(${ARCH_32_BITS})
1006   set(WIN_ARCH "32")
1007 ELSE()
1008   set(WIN_ARCH "64")
1009 ENDIF()
1010 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/simgrid.nsi.in" "${CMAKE_BINARY_DIR}/simgrid.nsi" @ONLY IMMEDIATE)