1 SimGrid (3.12) NOT RELEASED; urgency=low
4 * Interface improvement:
5 - Rename MSG_host_is_avail(h) to MSG_host_is_on(h)
6 - Sanitize the interface in MSG_task_ module:
7 - Merge two functions that were close enough but misleading:
8 set_compute_duration(t) -> set_flops_amount(t)
9 get_remaining_computation(t) -> set_flops_amount(t)
10 - set_data_size(t) -> set_bytes_amount(t)
11 get_data_size(t) -> get_bytes_amount(t)
12 - Massive cleanups in the functions related to the energy
13 - MSG_host_get_pstate_number() -> MSG_host_get_nb_pstates()
14 - New: MSG_host_get_pstate()
16 - msg/energy/onoff: switching hosts on and off
18 * Interface improvement:
19 - Rename Host.isAvail() to Host.isOn()
20 - Rename Process.currentProcess() to Process.getCurrentProcess()
21 - Rename Task.setDataSize() to Task.setBytesAmount()
22 - Merge Task.getRemainingDuration() and Task.getComputeDuration() into Task.getFlopsAmount()
24 - #18874: Actually allows the GC to reclaim tasks
28 - SIMIX_process_throw: raises an exception in a remote process
29 * Refactoring: Separate submodules
30 - libsmx: the public interface, as libc in a real system
31 - popping: the strange dance that converts a user request into a kernel handling
32 - smx_context_*: the virtualization mechanisms that embeed the user code
33 - smx_*: the handling of each simcalls
35 - simcall_host_set_power_peak_at -> simcall_host_set_pstate
36 * Rename smx_action_t into smx_synchro_t, making explicit that these
37 things are used to synchronize processes with their environment.
38 For example, a communication is a sort of synchronization involving
39 the communicating processes (that may block until the exchange) and
40 the platform. The same can be said from computations, etc.
42 - #18888: segfault when a process ends before its kill_time
46 - Onesided early support for : MPI_Win_(create, free, fence, get_name, set_name, get_group), MPI_Get, MPI_Put, MPI_Accumulate, MPI_Alloc_mem, MPI_Free_mem.
47 - MPI_Keyval*, MPI_Attr* functions, as well as MPI_Comm_attr*, MPI_Type_attr* variants (C only, no Fortran support yet)
48 - MPI_Type_set_name, MPI_Type_get_name
49 - MPI_*_c2f and MPI_*_f2c functions
50 - MPI_Info_* functions (beware, get_nthkey may not follow the insertion order)
51 - MPI_Pack, MPI_Unpack and MPI_Pack_size functions
52 - Activate a lot of new tests from the mpich 3 testsuite
54 - Constant times can be injected inside MPI_Wtime and MPI_Test through options smpi/wtime and smpi/test
55 - InfiniBand network model added : Based on the works of Jerome Vienne (http://mescal.imag.fr/membres/jean-marc.vincent/index.html/PhD/Vienne.pdf )
56 - When smpi/display_timing is set, also display global simulation time and application times
57 - Have smpirun, smpicc and friends display the simgrid git hash version on --git-version
58 * Collective communications
59 - SMP-aware algorithms are now dynamically handled. An internal communicator is created for each node, and an external one to handle communications between "leaders" of each node
60 - MVAPICH2 (1.9) collective algorithms selector : normal and SMP algorithms are handled, and selection logic is based on the one used on TACC's Stampede cluster (https://www.tacc.utexas.edu/stampede/).
61 - Support for Rabenseifner Reduce/Allreduce algorithms (https://fs.hlrs.de/projects/par/mpi//myreduce.html)
63 - Replay now uses algorithms from wanted collective selector
64 - Replay can be used with SMP-aware algorithms
65 - Memory occupation of replay should now be contained (temporary buffers allocated in collective algorithms should be shared between processes)
66 - Replay can now replay several traces at the same time (check examples/smpi/replay_multiple example), to simulate interactions between several applications on a given platform. User can specify the start time of each instance. This should also allow replay + actual applications to run.
68 - [#17799] : have mpi_group_range_incl and mpi_group_range_excl better test some corner cases
69 - Correctly use loopback on fat-tree clusters
70 - Asynchronous small messages shouldn't trigger deadlocks anymore
71 * Energy/DVFS cleanup and improvement
72 - smpi_set_host_power_peak_at() -> smpi_set_host_pstate()
73 - new: smpi_get_host_pstate()
76 - "Full" network optimization flag was broken since Surf++
77 - Better handling of precision flags in maxmin
78 - Fix bug causing sometimes "Impossible" errors
79 - Properly pass cluster properties to included hosts
80 * Improvement of the Energy plugin.
81 - Always update the consumption before returning that value
82 - New property: watt_off to denote the disipation when the host is off
85 - Add a xbt_heap_update function, to avoid costly xbt_heap_remove+xbt_heap_insert use
86 - Add a xbt wrapper for simcall_mutex_trylock (asked in [#17878])
87 - Add two new log appenders : rollfile and splitfile. Patch by Fabien Chaix.
89 * Tracing is now always enabled (no way to turn it out)
90 * Move headers around to sort them out on installed systems:
91 - instr/instr.h -> simgrid/instr.h
92 - instr/jedule/* -> simgrid/jedule
93 - simdag/datatypes.h was removed
94 - simdag/simdag.h -> simgrid/simdag.h
95 - msg/datatypes.h was removed
96 - msg/msg.h -> simgrid/msg.h
98 -- $date Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
100 SimGrid (3.11) stable; urgency=low
105 * Normalizing pointers addresses tool for better diff between logs
108 * Add cloud examples using new VMs
109 - examples/msg/cloud/two_tasks_vm.tesh
110 - examples/msg/cloud/simple_vm.tesh
111 - examples/java/cloud/cloud.tesh
112 - examples/java/cloud/migration/migration.tesh
113 * Add java surf examples:
114 - examples/java/surfPlugin/surf_plugin.tesh
115 - examples/java/reservationSurfPlugin/reservation_surf_plugin.tes
116 - examples/java/surfCpuModel/surf_cpu_model.tesh
117 * Add SMPI+MSG example:
118 - examples/smpi/smpi_msg_masterslave/
123 - msg task destroy cancel test
124 - msg_host on/off test
125 * Move all tests in testsuite to teshsuite (adding tesh files)
126 * Restructure teshsuites
127 - one folder for each kind of test
128 * Restructure AddTests.cmake
130 - structure the order of tests (with sections)
133 * Add virtual machine
134 - creation of a VM on a PM
135 - migration of a VM from a PM to another PM
137 - MSG_process_join(msg_process_t process, double timeout)
138 - msg_bar_t MSG_barrier_init(unsigned int count)
139 - int MSG_barrier_wait(msg_bar_t barrier)
140 - void MSG_barrier_destroy(msg_bar_t barrier)
141 - msg_as_t MSG_environment_as_get_by_name(const char * name)
142 * New option "msg/debug_multiple_use" to help debugging when a task is used
145 - Improvements and finalization of MSG_storage, MSG_file APIs and their
147 - Increase code coverage in test suites
151 * Protect context stacks against stack overflow. The number of protected memory
152 pages allocated on the top of each stack (1 by default) can be configured
153 with the new command line option --cfg=contexts/guard_size:<value>.
154 * Simcalls are now generated by a python script that
155 - generates files included by SimGrid
156 - checks that all the functions exist, and proposes prototypes
158 - remove sem_destroy, file_set_data, comm_destroy, vm_set_state,
159 host_set_data, host_get_data
161 - simcall_process_join(smx_process_t process, double timeout)
162 * Fix bug where sleeping processing could not be suspended.
165 * Translate surf models from C to C++
166 - Generic classes for all models: Model, Resource, Action
167 - A generic interface for each kind of model (CPU, Network, Storage
168 Workstation, WorkstationVM)
170 * Translate surf routings from C to C++
171 * Add callbacks using sigc++ or boost::signals2
172 - Add callback functions for resource creation/destruction
173 - Add callback functions for action state change
174 - Handle Energy as a plugin
175 * Replace swag by boost::intrusive
176 * Add new routing models for clusters. For documentation, see
177 http://simgrid.gforge.inria.fr/simgrid/latest/doc/platform.html#pf_cluster
178 - tori, with topology="TORUS" and topo_parameters="ndim1,ndim2,...,ndimn"
179 parameters for cluster tag
180 - Fat trees, with topology="FAT_TREE" and
181 topo_parameters="h;m1,...,mh;w1,...,wh;p1,...,ph" parameters for cluster tag
182 - see examples/platforms/torus_cluster.xml and
183 examples/platforms/fat_tree_cluster.xml
187 * Hostfiles support host:nb_processes construct to deploy several processes on
189 * Collective communication algorithms should not crash if used with
190 improper number of nodes and report the error.
191 * SMPI now partially supports MPI_Topologies : MPI_Cart_create, MPI_Cart_shift,
192 MPI_Cart_rank, MPI_Cart_get, MPI_Cart_coords, MPI_Cartdim_get,
193 MPI_Dims_create, MPI_Cart_sub are supported.
194 * New interface to use SMPI programmatically (still depends on MSG for
195 some parts, see examples/smpi/smpi_msg_masterslave) :
196 - SMPI_app_instance_register(const char *name, xbt_main_func_t code,
200 * Global variables privatization in MPI executables is now performed at runtime
201 with the option smpi/privatize_global_variables (default:no).
202 Limitations : Linux/BSD only, with mmap enabled. Global variables inside
203 dynamic libraries loaded by the application are not privatized (static
204 linking with these libraries is advised in this case)
207 * Options defined in XML work correctly now.
210 * New cmake option, enable_lib_in_jar, to control whether native libraries are
211 copied into simgrid.jar or not (ON by default). Use this option if you want
212 to reduce the size of the installed simgrid.jar, *and* the native libraries
213 are kept installed elsewhere.
214 * Surf binding with SWIG (code generated in maintainer mode only):
215 - plugin to handle callbacks
216 - CPU model only for the moment
219 * Supernovae build mode is definitively removed. It was used to improve
220 inlining and inter-module optimizations. It is nowadays superseded by
221 link-time optimizations commonly available in compilers.
222 * Update ns-3 find lib. Bindings for ns-3 should work again now.
223 * Add boost dependency for surf++
224 * Add new macro for tests
225 - ADD_TESH(name <tesh_args>)
226 - ADD_TESH_FACTORIES(name "thread;ucontext;raw" <tesh_args>)
230 - xbt_bar_t XBT_barrier_init(unsigned int count)
231 - int XBT_barrier_wait(xbt_bar_t barrier)
232 - void XBT_barrier_destroy(xbt_bar_t barrier)
233 * Make the xbt_os_time module public
235 -- Sat May 31 22:39:38 CEST 2014 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
237 SimGrid (3.10) stable; urgency=low
239 The Clean Diaper Release, a.k.a. SimGrid is leak-free.
242 * Reintegrate Java to the main archive as desynchronizing these
243 package is not acceptable anymore (Java is now considered stable)
244 * Add explicit synchronization facilities through semaphores
245 * Bug fix: Task.setDataSize() only changed the C world, not the value
246 cached in the Java world
249 * Dramatically change the way files are handled. API and internals changed, but
250 this part of MSG was not considered as production grade either.
251 * Add explicit synchronization facilities through semaphores
252 * Add a new function MSG_host_get_process_list()
253 * Preliminary DVFS support (see examples/msg/energy/ for details)
256 * SMPI is now included directly in the libsimgrid as the windows
257 linker doesn't force us on splitting it anymore.
258 * Improvements of the SMPI replay tool:
259 - Most of the collective communications are now rooted in the same process as
260 in the original application.
261 - Traces now rely on the same MPI data type as the application (MPI_BYTE was
262 used until now). Multiple data types can now be used in a trace.
263 - The replay tool now supports traces produce either by TAU or a modified
265 - Bug Fix: the compute part of the reduce action is now taken into account.
266 - Gatherv collective is now supported
267 - SimGrid (SMPI for now) can generate replay traces as well. Option -trace-ti
268 of smpirun outputs time independent traces for the current run. One file
269 is created per process. If too many processes are simulated, this behavior
270 can be changed to one file for all processes by using the
271 tracing/smpi/format/ti_one_file flag
272 * smpirun generates the host file if needed (with given host count and platform)
273 * Integration of more than 100 STAR-MPI, MPICH, OpenMPI collective algorithms
274 - allows to select one in particular with --cfg=smpi/coll_name:algorithm
275 - allows to use the decision logic of OpenMPI(1.7) or MPICH(3.0.4) by setting
276 --cfg=smpi/coll_selector:(mpich/ompi)
277 * Support for new functions : MPI_Issend, MPI_Ssend, Commutative operations in
279 * Add a --cfg:tracing/smpi/internals option, to trace internal communications
280 happening inside a collective SMPI call.
281 * Fix the behavior of complex data types handling.
282 * Make MPI_Wtime another synchronization point to take computations into
284 * Replace MPICH-1 test suite by the one from MPICH 3.0.4. Can be built using
285 enable_smpi_MPICH3_testsuite flag in cmake. Run with ctest.
286 * Add all missing Fortran bindings, SMPI should work with Fortran 90
287 (no privatization of global variables yet)
288 * Preliminary DVFS support (see examples/smpi/energy/ for details)
291 * Verification of liveness properties is now available for SMPI applications
292 (in addition to MSG applications)
293 * Bugged examples using SMPI in examples/smpi/mc/
294 * Add --cfg=model-check/visited option. Allows the verification of infinite
295 programs. Detection of loops in the execution thanks to the system state
296 comparison and reduction of the state space to explore. Can be combined with
297 DPOR for safety properties.
300 * Allow to change SimGrid configuration (see --help) within the code
301 thanks to SD_config() as it can be done in MSG.
302 * Add a new function SD_task_set_amount() upon user request.
305 * Handle units for values (10ms, 10kiloflops, 10Bps, 1GB, ...)
306 * Remove rule based routing (no more PCRE dependency)
307 * Add a limiter_link option to cluster tag, to specify a maximum reachable
308 bandwidth in fullduplex mode when it is less than twice the nominal bandwidth.
309 * Add a loopback_bw and loopback_lat options to cluster tag.
310 * Fix the peer tag that could not be mixed with other AS within a Vivaldi
311 routing. Now peers are encapsulated in an AS and have their own private
312 router but this is transparent.
315 * Our own implementation of getline is renamed xbt_getline, and gets
316 used even if the OS provide a getline(). This should reduce the
317 configuration complexity by using the same code on all platforms.
318 * New type: xbt_cfg_elm_boolean.
319 * Allow to use yes/no for boolean configuration options in the command line.
320 * Allow to disable SimGrid cleanups at exit from command line option.
321 There are situations where one may want a simulation to end with an exit.
322 Unfortunately, calling exit may cause SimGrid to segfault, which is quite
323 annoying when scripting around the simulator. Adding a
324 --cfg=clean_atexit:no allows to circumvent this issue.
327 * Lots of memory leaks were corrected in this release.
328 There is no known memory leaks anymore, in all of our 600+ tests.
329 * New command line option --version, to get SimGrid version information.
330 Packagers may want to add extra words to SIMGRID_VERSION_EXTRA defined in
332 * Supernovae builds are deprecated, and expected to be removed in the next
335 -- Sun Nov 17 00:26:44 CET 2013 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
337 SimGrid (3.9) stable; urgency=low
339 The Grasgory release: GRAS is really dead now.
341 * Complete overhaul of the internal host structures scheme.
344 * If you use GRAS, you should stay at SimGrid 3.5 (at most) since it
345 was considered as experimental and badly maintained since then.
346 * Keeping it was thus a trap to our potential users, that could take
347 it instead of MSG or SMPI by mistake despite is pity state.
348 * GRAS seems to have very few users (if any), and no one volunteered
349 to maintain it further. It also induces a lot of XBT code (for
350 portability sake), that must be maintained too.
351 * For all these reasons, we killed GRAS. If someone wants to revive it
352 in the future, don't cry, our git history still remembers of GRAS.
355 * Major overhaul. Merge our documentation again as time proved that
356 splitting it was really not helping our users.
357 * Further improve the developer documentation to help newcomers
358 hacking on SimGrid itself. The user documentation (and in
359 particular, the beginner documentation) is still in a sorry state.
362 * Now works on Windows too!
363 * Much more extensive test suite, from MPICH
366 * Add a new loader (SD_PTG_dotload) that creates a parallel task graph
367 (i.e., a DAG whose nodes are parallel tasks) from a dot file. Creates a
368 dynar of SD_TASK_COMP_PAR_AMDAHL and SD_TASK_COMM_MXN_1D_BLOCK tasks.
369 * Bug fix: let task be scheduled when the last dependency to be solved is
370 a control dependency.
371 * Remove SD_load_environment_script function.
372 Use the C sg_platf function if you want to declare a platform
376 * New function: MSG_process_get_number()
377 * Old function documented: MSG_config()
378 * Remove MSG_load_platform_script function
379 Use the C sg_platf function if you want to declare a platform
383 * Change the default value of the TCP_gamma constant (maximal size of TCP
384 congestion window) to a more realistic 4MiB value. If you notice changes in
385 your simulation results, you can fall back to the previous 20k tiny window
386 by adding --cfg=network/TCP_gamma:20000 on command line.
387 * (Hopefully) fix a bug wrt periodic availability and state traces
388 * Bug fix: use default values at start when first event in availability/state
389 trace is not at time 0.
392 * remove the "new_" part of function name sg_platf_new_trace_connect
393 (resulting in sg_platf_trace_connect), since it does not create
397 * Kill synchronized dynars, and xbt_dynar_dopar(). We cannot think of a
398 use case where it's really mandatory, and maintaining it was a pain in
400 * New: xbt_fifo_search(), search an item with a user-provided
401 comparison function instead of dumb pointer comparison.
404 * Fix the lua deployment:
405 Use `simgrid.init_application()` before deployment instead of
406 `simgrid.msg_register_application()` after.
409 * Transfer the tracing files into the corresponding modules.
411 -- Tue Feb 5 11:31:43 CET 2013 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
413 SimGrid (3.8.1) stable; urgency=low
415 The "we are told that some people want to also *install* the simgrid
418 * Add missing file "tesh.1" to the archive.
420 -- Sat Oct 27 16:12:11 CEST 2012 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
422 SimGrid (3.8) stable; urgency=low
424 The Psssshiiiit release: SimGrid jumps into the Cloud.
427 * Add an experimental interface to manipulate VMs. They are mainly
428 process groups with very few intrinsic semantic, but they should
429 allow you to build the semantic you want easily.
430 * New function: MSG_host_set_property_value()
431 * New function: MSG_process_on_exit(). To clean memory in all cases.
432 * Bug fixes that made the host (and link) failures unusable.
433 * Add a way to auto-restart process when the host in which they are
434 executing comes back (ON_FAILURE="RESTART" on deployment file,
435 MSG_process_auto_restart_set).
436 * Use the "msg_" prefix for all datatypes (instead of m_, msg_ and MSG_),
437 please stop using the old ones, they are DEPRECATED.
439 * Deprecate functions MSG_global_init() / MSG_global_init_args()
440 Please use MSG_init() instead. (reducing the amount of entry
441 points in the library helps us).
442 * Make it impossible to link against the wrong version of the lib
443 * Deprecate MSG_clean(). No need to call it anymore.
444 * Function MSG_get_host_number() is not deprecated anymore.
447 * Split the doc into a user guide and a reference guide.
448 * Start a developper guide to help people hacking on SimGrid.
451 * Enable tracing by default. This modules rocks you should use it.
452 * Remove option custom_flags. Now use environment variables CFLAGS
454 * Use default cmake things to detect lua instead of home grown ones.
455 * New option "enable_mallocators" to disable mallocators, for debugging
456 purpose ("on" by default).
459 * Bug fixes around the resource failures: don't let the processes
460 survive the host they are running onto.
461 * Add an interface to auto-restart processes when the host in which they are
462 executing comes back.
463 * Ensures that SIMIX_clean is called automatically. It's not part of
464 the public interface anymore (bindings should be updated).
467 * Bug fix for when SD_Simulate is called with a positive value: be careful
468 when comparing doubles. Sometimes they are different for non significant
470 * New types of typed tasks. SD_TASK_COMP_PAR_AMDAHL represents a
471 parallel task whose initial work is distributed among host according
472 to the Amdahl's law. Such tasks are created with a parameter alpha
473 that corresponds to the non-parallelizable part of the computation.
474 SD_TASK_COMM_PAR_MXN_1D_BLOCK represents a complex data redistribution
475 between two sets of workstations assuming a 1D block distribution (each
476 workstation owns a similar share of data) on both sides.
478 These tasks can be scheduled with SD_task_schedulel or SD_task_schedulev.
479 Data redistribution will be automatically scheduled once parent and child
480 are both scheduled. The filling of computation_amount and
481 communication_amount structures is now done seamlessly thanks to the chosen
483 * New function SD_workstation_dump to display various information
484 * New function SD_task_set_rate to throttle the bandwidth allowed to be used
485 by a SD_TASK_COMM_E2E typed task. This rate depends on both the nominal
486 bandwidth on the route onto which the task is scheduled and the amount of
488 To divide the nominal bandwidth by 2, the rate then has to be :
489 rate = bandwidth/(2*amount)
490 * Compute tasks that have failed can now be rescheduled and executed again
491 (from their beginning)
492 * Increasing source code coverage (src/simdag is now covered at 95.8%
496 * Re-implement time-independent trace replay using SMPI (at the
497 smpi_smp_* level) instead of MSG. This should replace
498 examples/msg/actions/actions.c
499 * Implement support of MPI Datatypes (vectors, hvectors, indexed,
500 hindexed and structs)
501 * Implement the exchange of non-contiguous data.
502 [Khalid Hasanov & Jean-Noel Quintin] Thanks for the patch, guys.
503 * Correct behavior of smpi/sender_gap and set its default value to 0
504 * Add option to asynchronously send small messages to allow better
505 simulation of pt2pt communications. --cfg=smpi/async_small_threshold:value
506 specifies the size in bytes under which messages will be asynchronously sent.
507 * Add support of MPI_Iprobe, MPI_Probe, MPI_Testall, MPI_Wtick functions
508 * SMPI now handles more MPI specific values in input. Closes [#14389] and [#14388]
511 * New C interface to define a platform: XML is now optional.
512 For more info, please check include/simgrid/platf.h.
513 * New interface to define random platforms from the C:
514 For more info, please check include/simgrid/platf_generator.h and
515 examples/msg/masterslave/masterslave_platfgen.c
516 * Export a sg_cmdline dynar containing all the arguments we got from
520 * Two new tracing options for adding comments to trace file so you
521 can track your experiments (see --help-tracing for details).
522 * New option to generate a impoverished trace file (--cfg=tracing/basic:1)
523 * Adding the SimGrid version that generated the trace file as a comment.
524 * Instrumenting other MSG functions (MSG_task_isend_with_matching and MSG_task_dsend)
525 * Fix to avoid key clashes on Paje links
526 * Other minor fixes related to the Paje specification
529 * Functions xbt_dict_hash() and xbt_dict_hash_ext() are made public,
530 and renamed to xbt_str_hash() and xbt_str_hash_ext().
531 * New function: xbt_os_timer_resume() to restart a timer w/o resetting it.
532 * Greatly improve the robustness of mmalloc to user errors (such as
533 using an area after freeing it, or freeing it twice)
535 -- Thu Oct 25 17:30:06 CEST 2012 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
537 SimGrid (3.7.1) stable; urgency=low
540 * Restore the prototype of MSG_process_create_with_environment() to
541 the pre-3.7 situation by removing the kill_time argument.
542 * Add a MSG_process_set_kill_time() function instead.
545 * Fix weird behaviors when dealing with parallel tasks.
548 * Simgrid is now built as a dll.
549 * Simgrid-java now works on Windows.
550 * Simgrid-Java is now included into Windows package.
553 * First pre-build package for MacOSX.
556 * Fix compilation when using MSG_USE_DEPRECATED.
557 * Fix some compilation issues on Macs and Windows.
558 * Reduce the number of failing tests on exotic systems, like Debian/Hurd.
559 * Environment variables CFLAGS and LDFLAGS are now honored by cmake.
561 We discovered that the Lua console is broken, but we are missing the
562 manpower to fix it right now. The problem existed in 3.7 too, so we
563 are not blocking the release for that. Sorry if you depended on this
564 feature, any help would be really welcome.
566 -- Thu Jun 7 2012 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
568 SimGrid (3.7) stable; urgency=low
570 The "spring cleanups (before the next Big Project kicks in)" release.
573 * We can specify the SMPI latency/bandwidth factor with command line
574 add --cfg=smpi/bw_factor:"threshold0:value0;...;thresholdN:valueN"
575 or add --cfg=smpi/lat_factor:"threshold0:value0;...;thresholdN:valueN"
576 You can also use the "config tag" from platform file by adding this line
577 <prop id="smpi/bw_factor" value="threshold0:value0;...;thresholdN:valueN"></prop>
578 (see "example/platforms/tag_config.xml" to use "config tag").
579 Note that the command line supersedes the platform file configuration.
580 * Change the correction factors used in LMM model, according to
581 the latest experiments described in INRIA RR-7821.
582 Accuracy should be improved this way.
583 * Use the partial invalidation optimization by default for the
584 network too. Should produce the exact same results, only faster.
585 * Major cleanup in surf to merge models and split some optimization
586 mechanisms from the core of the models. As a result you can now
587 specify which model to use (e.g., --cfg=network/model:LV08
588 --cfg=cpu/model:Cas01) and which optimization mode to use
589 (e.g., --cfg=network/optim:lazy --cfg=cpu/optim:TI).
590 Incompatible combinations should err at initialization. See
591 --help-models for the list of all models and optimization modes.
592 * The CLM03 workstation model was dropped for simplicity because it
593 used the deprecated CM02 network model. Use default instead.
594 * Rename the TCP_gamma configuration option to network/TCP_gamma
595 * Rename the coordinates configuration option to
596 network/coordinates, and document it
597 * Use now crosstraffic keyword instead of the terribly misleading
598 fullduplex keyword. It is activated by default now in the current
599 default model, use --cfg=network/crosstraffic:0 to turn it off.
600 * Ongoing refactoring the model parsing to make XML files optional
601 See include/simgrid/platf.h for details (still to be completed)
604 * Major overhaul of the documentation. Almost instructive now :/
605 * Deprecate the use of m_channel_t mechanism like MSG_task_{get,put}
606 functions and friends. This interface was considered as
607 deprecated since over 2 years, it's time to inform our users that it is.
608 Switch to MSG_task_{send,recv} instead, or compile SimGrid command line
609 'cmake -Dcustom_flags="-DMSG_USE_DEPRECATED" .' if you really need to
610 use these (crappy) functions in your code.
611 These functions will be removed soon. Stop using them now.
612 * Deprecate MSG_get_host_{table,number}
613 Implement MSG_hosts_as_dynar() instead.
614 * Implement MSG_processes_as_dynar() (Closes gforge #13642)
615 * Remove the public field msg_host_t->name. Use MSG_host_get_name()
618 * Stabilize the parallel execution mode of user contexts
619 * Introduce configuration variables to control parallel execution:
620 - contexts/synchro: Synchronization mode to use when running
621 contexts in parallel (either futex, posix or busy_wait)
622 - contexts/parallel_threshold: Minimal number of user contexts
623 that must be part of a scheduling round to switch to parallel
624 execution mode (raw contexts only)
625 * Fix bugs that prevented to use suspend/resume along with
626 synchronization structures.
627 * Fix bugs in process termination that lead to invalid memory access
628 in very specific conditions.
631 * Introduce a parallel mode for the models (controlled by surf/nthreads
632 configuration item). In our tests, running the models in parallel
633 never lead to any speedups because they are so fast that the gain
634 of computing each model in parallel does not amortizes the
635 synchronization costs, even when ultra fast futexes are used.
636 This is released anyway because YMMV.
639 * Performance boost by using a swag internally to compute the set of
640 tasks that are finished and should constitute the return value of
644 * Enable it by default now that it is considered rather stable.
647 * Documentation of the tracing functions.
648 * Performance gains when tracing categorized/uncategorized resource
649 utilization by avoiding calls to get route when updating resource
650 variables. LMM constraints are being used instead.
651 * API changed to set task categories. Use MSG_task_set_category instead
652 of TRACE_msg_set_task_category, and SD_task_set_category instead
653 of TRACE_sd_set_task_category. They only work if ENABLE_TRACING is ON.
654 * Bugfix for graphicator, routes not correctly obtained, memory leaks
655 * Examples for link user variables added (see at examples/msg/tracing/)
656 * Deprecated function TRACE_msg_set_process_category completely removed
657 * Trace header updated according to the latest Paje file format
658 * Tracing network lazy updates, no longer obligate users to use full updates
659 * --cfg=tracing/platform:1 also registers power/bandwidth variables
660 * Experimental: let user code declare/set/push/pop application states for hosts
661 * API changed to allow the manual creation of graph configuration files
662 for Triva. See TRACE_get_node_types() and TRACE_get_edge_types().
665 * Improve the API of Lua MSG bindings, using the Lua spirit.
666 * Each simulated process now lives in its own Lua world (globals are
667 automatically duplicated). It helps writing simulators. Will allow
668 to run Splay programs within SimGrid in the future.
669 * Add a Chord example in Lua, equivalent to the MSG one.
672 * Start the implementation of a solution to express temporal
673 properties, not only local assertions. This is still an
674 experimental work in progress, stay clear from it to be safe.
678 - Add new runtime parameters --help-logs and --help-log-categories
679 to display informations about supported logging parameters and
681 - Old deprecated parameters --{gras,surf,msg,simix,xbt}-log=...
682 don't exists anymore.
683 * Mallocators: allow value NULL for the reset function.
685 - New function xbt_dict_new_homogeneous(void(*)(void*)) to
686 create homogeneous dictionaries, where all the elements share the
687 same free function. Non homogeneous dictionaries will be
688 deprecated in the next release.
689 - Dicts of scalar elements (xbt_dicti_*) are deprecated.
690 - Multi-level dictionaries are deprecated.
692 - new function xbt_dynar_search_or_negative() that is useful when
693 you have less than 2 million elements in your dynar and don't
694 want of the extra complexity of catching exceptions when the
695 element is not found.
697 - Make xbt_os_thread module (for thread portability) public.
698 Documentation is still to come, sorry.
700 - Cleanups and simplifications to make it maintainable again.
701 - Exotic features (such as memalign and valloc) were removed.
702 - The metadata were extended and improved so that the
703 model-checker becomes able to explore and inspect the heaps.
704 - This may induce a performance drop when enable_model-checking is
705 ON in cmake (even if it's not used in the simulation), but it is
706 necessary at this point to get MC working.
708 Turn model-checking OFF if simulation performance matters to you.
709 Not enabling it at runtime is not enough, disable it in cmake.
711 -- Tue May 15 11:30:19 UTC 2012 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
713 SimGrid (3.6.2) stable; urgency=low
715 The "Not coding new stuff allows to polish old things" release.
718 * New bindings to the NS3 packet level simulator (experimental)
719 * Use the raw (efficient) execution contexts instead of the sysv
720 (portable) ones when possible.
721 * libpcre is now mandatory in any cases since not using it led to
722 severe performance loss and possibly other issues
723 * Update the XML platforms:
724 - G5K: include the latest machine in Nancy
725 - GridPP and LCG: new platforms
726 * Documentation was partially updated, at least (more to come)
728 Bug fixes, cosmetics and small improvements
729 * Free terminated processes before the end of the simulation to avoid
730 exhausting the memory of users having very dynamic amount of
732 * Bug fix and cosmetics about canceling non-running tasks
733 * Bug fix about the dot loader's issues when using libcgraph
736 * Create an installer for windows with nsis (amd64 and win32)
737 - Add an hello world project to illustrate simgrid project creation.
738 - Embed libpcre into the Simgrid installer to avoid
739 its compilation burden
740 * The raw execution contexts should work on Apple now
741 * Port to Windows 64 bits
742 - Sysv contexts now have an implementation for this arch
743 - GRAS communication features now support this arch
744 * Drop support for borland compiler on windows
745 - this code was not maintained, and we kinda depend on gcc nowadays
746 * Fix portability issues on kfreebsd/gnu: build error about semaphores
747 * Fix portability issue on unstable ubuntu: linker became picky on
750 -- Wed Oct 5 15:51:01 CEST 2011 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
752 SimGrid (3.6.1) stable; urgency=low
754 The "Oops, we broke Macs too" release
757 * Fixed contexts detection so that raw ones are used when possible
758 * On Mac, do not use Posix Ucontexts with gcc v4.[1-5] since this
759 leads to a strange error, with user code segfaulting sometimes when
760 the generated code is not perfectly aligned (which is not
761 controllable from the user side, depends on the amount of code)
764 * New macro: CATCH_ANONYMOUS, which is like CATCH(e) but without argument.
766 -- Mon Jun 27 13:59:03 CEST 2011 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
768 SimGrid (3.6) stable; urgency=medium
770 The Summer Release, also known as the "OMG! They Killed Kenny!" version
773 * Bindings now constitute their own package, separated from the main one.
774 Rationale: reduce our maintenance nightmare by reducing the module coupling
775 They will soon be released on their own on gforge.
777 svn co svn://scm.gforge.inria.fr/svn/simgrid/contrib/trunk/simgrid-java
778 svn co svn://scm.gforge.inria.fr/svn/simgrid/contrib/trunk/simgrid-ruby
780 GRAS: It is not considered as stable anymore, but experimental. Sorry.
781 * It's not quite deprecated for now because we have no replacement,
782 but it may soon become the case.
785 * New MPI functions supported: MPI_Comm_disconnect, MPI_Comm_get_name
786 * Fortran: New user-level cache variable to store the rank of the running
787 process. This improves performance by an order of magnitude.
788 * C: New coccinelle script to automatically locate and modify global and
789 local static variables.
790 * Improved SMPI network model with a sender-side gap to account for multiple
794 * New function MSG_comm_get_status(). MSG_comm_test() and MSG_comm_testany()
795 only say if a communication is finished, no matter whether it succeeded or
796 failed. You can call MSG_comm_get_status() to know the status of a finished
798 * New function MSG_task_dsend() to send a task and detach it. When a
799 communication is detached, you are never notified of its success or failure
800 and the memory is released automatically once it is finished. This function
801 is useful when you don't care about the end nor the success of a
803 * Change the prototypes of action replay. Sorry for inconvenience,
804 but this is really more efficient this way (and to adapt your code,
805 you just have to fix the initialization, that shouldn't be too long)
806 * Kill the braindead MSG_task_refcount_dec() function. I guess nobody
807 ever managed to do anything useful with it.
808 * New function MSG_comm_testany(). Similarly to MSG_comm_waitany(), it
809 takes a dynar of communications. It returns immediately and gives the
810 index of a finished communication (if any).
811 * New example: a basic implementation of the Chord P2P algorithm.
814 * New model for multi-core CPUs. You can now use the core attribute to
815 precise the number of cores of a host. This is a basic model. Every
816 process running on the host receives at most the power provided in
817 the DTD (throughput<=power). Total throughput of process cannot exceed
819 * New peer tag. This peer tag creates a tiny AS comprising a host and a
820 router linked by an up-link and a down-link (possibly asymmetrical).
821 This kind of pattern allows to easily build last-mile model style platforms.
822 Aggregating such patterns in a rule-based AS is thus the technique of
823 choice for modeling large peer-to-peer/volunteer computing/cloud platforms.
824 * New model for Vivaldi routing. We transformed the Vivaldi network model
825 into a Vivaldi routing model (based on the rule-based model). This allows to
826 combine Vivaldi based latencies with last-mile platforms.
829 * Added a check for NaN of IEEE754 infinite in the double entries of
831 * Introduce a new context factory "raw", highly inspirated from the
832 ucontext factory, but using manually crafted functions in assembly to
833 do the work in an efficient manner.
834 * Allow to change the used context factory at run time, not only at
835 compilation time. Use --cfg=contexts/factory:raw for maximal speed.
836 * Add an option --cfg=contexts/stacksize:N to set the stack size of the user
837 contexts at runtime (only with raw contexts or ucontexts).
838 * Completely rewrote this module to allow parallel execution of user
839 processes. Use --cfg=contexts/nthreads:N to execute user processes
840 with N parallel threads (the default is 1, meaning no parallelism).
841 * Allow to decide dynamically between sequential and parallel modes.
842 When nthreads > 1, you can use --cfg=contexts/threshold:P to run the user
843 processes in parallel only when their number is greater than or equal to P
845 * Added a check for NaN of IEEE754 infinite in the double entries of
849 * New command line option: if you pass --cfg=verbose-exit:0, SimGrid
850 won't output the state of processes when interrupted with Ctrl-C
851 * Add a new function xbt_dynar_to_array that transforms a dynar into a
852 NULL-terminated array. This may solve backward compatibility issues
853 due to the change to return type of SD_simulate. See also:
854 http://lists.gforge.inria.fr/pipermail/simgrid-user/2010-December/002206.html
855 * Add new macros with variable number of arguments.
856 - in xbt/log.h: XBT_DEBUG, XBT_VERB, XBT_INFO, etc.
857 - in xbt/asserts.h: xbt_assert
858 - in xbt/cunit.h: xbt_test_{add,fail,assert,log}
859 - in xbt/ex.h: THROWF and RETHROWF.
860 Define XBT_USE_DEPRECATED if you want to use the old numbered macros like
862 * Change xbt_die() to accept a format string with arguments, just like printf.
863 * New data structure: xbt_lib_t, like a dict but more general and with better
867 * New configuration options
868 Options triva/categorized and triva/uncategorized can be used to generate
869 graph configuration files for Triva visualization tool.
870 * Configuration option tracing/platform is renamed to tracing/categorized
871 * XBT logging makes tracing error checks easier, new root log hierarchy: instr
872 * New TRACE_user_link_variable interface:
873 User provides the name of the link and the tracing variable to attach to it
874 * the declaration of tracing categories must be done after the environment
876 * simpler tracing interface, just one way to declare categories
877 TRACE_category or TRACE_category_with_color, it is up to you
878 * links in the trace file are again identified by their names
879 * trace contains the full platform hierarchy exactly as declared using the ASes
880 * Options tracing/msg/[task|process]:1 groups the process by hosts
881 for both cases, tasks and processes must have names that are unique during the simulation
882 these options generate traces that are suited to gantt-charts, such as the space-time view of Paje
883 * The experimental option tracing/msg/volume is deprecated
884 its functionality may be reincorporated if needed
886 The tracing generates a trace file with unordered timestamped events,
887 because of the way the core simulator (surf) works. A script available
888 at the tools directory (fix-paje-trace.sh) can be used to put the events
889 in order. We have changed the tracing so it can generate ordered timestamped
890 events in the final trace, but depending on the simulator (and how much time
891 is simulated) that can lead to a huge memory utilization. It is deactivated
892 by default, but it can be activated using the --cfg=tracing/buffer:1 switch.
895 * Define a SIMGRID_VERSION macro in simgrid_config.h.
896 - We are trying hard to keep the API stable, but it may happen that
897 some things change (we're a research project after all, not a
898 nuclear plant operating system). If such things should happen, you
899 could rely on that macro to adapt.
900 - current value: 30600 for 3.06.00, aka 3.6
901 * Define macro MAKE_SIMGRID_VERSION(major, minor, patch) to help building
902 a number that can be compared with SIMGRID_VERSION.
903 * Add a build option -Denable_debug (set to ON by default): when set to OFF,
904 assertions and verbose/debug logging events are disabled at compile time.
906 -- Tue Jun 21 08:57:43 CEST 2011 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
908 SimGrid (3.5) stable; urgency=medium
911 * New feature to any SimGrid-based simulator: Model-Checking
912 Check SIN#1 for more details.
915 * New Model SMPI (three-interval linear regression for correction factors)
916 See RR-7426, available at http://hal.inria.fr/inria-00527150
917 * Ability to use FORTRAN MPI code (through f2c, automatically privatized)
918 * New MPI functions supported: MPI_Get_count(), MPI_Comm_split()
919 * New: RAM folding (see RR-7426 and examples/smpi/NAS/DT-folding)
920 * New: execution sampling (see RR-7426 and examples/smpi/NAS/EP-sampling)
921 * See also src/smpi/README
926 - Tracing API changes: TRACE_start and TRACE_end should not be called
927 by user-code. They are automatically called by simulators created
928 with SimDAG, MSG and SMPI if the toolkit is compiled with
929 tracing_enabled=ON. Categories declaration and utilization remain the
930 same for MSG and SimDag.
931 - A function was added to the tracing API to declare categories with
933 - TRACE_category_with_color (char *category, char *color)
934 where color must be in the following format
935 "%f %f %f", red, green, blue
936 and red, green, blue are float values in the interval [0, 1]
937 - User can specify NULL as color parameter, or continue calling
939 On that case, the tracing system will define random colors
940 - The following command-line options are supported:
941 --cfg=tracing/filename:msg.trace
942 --cfg=tracing:1 (activate tracing, needed to use others)
943 --cfg=tracing/platform:1 (categorized resource use)
944 --cfg=tracing/uncategorized:1 (uncategorized resource use)
945 --cfg=tracing/msg/task:1 (task creation)
946 --cfg=tracing/msg/process:1 (process creation, migration)
947 --cfg=tracing/msg/volume:1 (volume of MSG send/recv)
948 --cfg=tracing/smpi:1 (SMPI interface tracing)
949 --cfg=tracing/simdag:1 (allow SimDAG tasks receive categories)
950 - examples of examples/msg/tracing updated
952 - DAXLoader and DOTLoader functions can generate tasks with categories
953 - A new function to attribute a category to SD tasks:
954 TRACE_sd_set_task_category (SD_task_t task, char *category)
955 * Tracing the MPI interface implemented by SMPI
956 - Collective operations are traced with states
957 - Point-to-Point operations are traced with states/links
958 - Tracing activated by a parameter "-trace filename" passed
959 to smpirun during execution (considering that simgrid
960 is compiled with tracing enabled)
961 - To run the simulation with gdb, the simulator
962 accepts --cfg=tracing/smpi:1 to trace SMPI
963 - tesh files to check if smpi tracing is ok
964 - See examples/smpi/NAS/DT-trace
965 * GTNetS tracing re-worked
966 - adaptation to the tracing system of GTNets to cope
967 with modifications regarding the fullduplex mode
968 - new tesh files to check if gtnets tracing is ok
971 * Asynchronous communications through the functions:
972 MSG_task_isend/irecv and MSG_comm_test/wait/waitall
973 * New function: MSG_load_platform_script()
974 to make possible using a lua script instead of XML files to set up platforms
975 * New function: MSG_set_function
976 to associate functions to processes, used when bypassing the parser
977 * New functions: MSG_task_set_name(), MSG_task_set_compute_duration()
979 Platforms: Add some more examples in examples/platforms
980 * Grid'5000: see www.grid5000.fr
981 * *_30000_hosts.xml: various huge files [mainly scalability testing]
984 * Change the XML format. This is a very important modification. SimGrid
985 3.5 introduces a new hierarchical format based on the notion of
986 Autonomous Systems. Compatibility with old format is ensured
987 through the perl script provided in the install bin directory
988 bin/simgrid_update_xml.
989 It is now possible to build platforms with specific routing
990 mechanism (Full/Dijkstra/DijkstraCache/Floyd) and to easily
991 connect several platforms together. We will try to provide soon
992 set of realistic platforms exploiting these properties (have a
993 look at examples/platforms/ for the moment).
994 * Take the opportunity of the XML format change to be a good XML citizen:
995 rename link:ctn to link_ctn and similar changes (also dealt with by
997 * Add a new routing scheme (rule-based) using regular expressions. It
998 enables to have an extremely low memory footprint when the
999 underlying routing is simple and can be compactly described. You
1000 need to have libpcre4-dev (perl regular expressions) installed if
1001 you want to use this routing scheme.
1002 * Revive the cluster TAG and allow to easily and efficiently (both in
1003 term of memory and speed) connect clusters together. Have a look
1004 at teshsuite/simdag/platforms/ to see how this can be done. With
1005 this tag, you can create clusters with thousands of tasks at no
1006 cost (have a look at examples/platforms/).
1007 Note: clusters are implemented as ASes, so there is no need for an
1008 enclosing AS tag if you have only one cluster in your platform.
1009 * Add new generic functions in the public interface that allows the user
1010 to call SURF 'create_resource' methods from your code (same
1011 functionality as the XML bypass mechanism but with a much lighter
1013 * Add a new model (enabled through command line --cfg=network/model:SMPI)
1014 that uses a piecewise linear approximation to produce better
1015 results when exchanging small messages.
1016 * Add a new parameter to handle correctly full duplex link and account
1017 for interferences between uplink and downlink communications
1018 (activate with --cfg=fullduplex:1).
1021 * Rename the SD_READY (all dependencies are satisfied and task is
1022 scheduled) state in SD_RUNNABLE and define a new SD_SCHEDULABLE (all
1023 dependencies are satisfied) state.
1024 This prevents a confusion between the notion of "ready to schedule"
1025 (SD_SCHEDULABLE) used in DAG scheduling and that of "ready to be
1026 simulated" (SD_RUNNABLE) used by the simulation kernel.
1027 * Change the way a task is considered as ready. Instead of removing
1028 dependencies when a task is done, a counter is decreased. This way,
1029 it is always possible to reach ancestors thanks to the
1030 SD_taks_get_parents function (even after the end of the simulation.)
1031 * Change the return type of SD_Simulate from (SD_task_t*) into
1032 xbt_dynar_t. This function was in handling a dynar internally and
1033 converted it into a NULL terminated array for historical reasons.
1034 * New function SD_dotload(char*) to load a DAG described in dot
1035 format. This loader and the corresponding examples require the
1036 installation of the graphviz library.
1037 * Fix a bug in the management of tasks of size 0 in the surf network
1038 models. This problem was only visible with SIMDAG and you should
1039 thus disregard results produced with earlier versions if you
1040 relied on this feature (some tasks were blocked because of this).
1041 * Fix a bunch of stuff that prevented to use classical models with SIMDAG
1042 even though your applications were doing only point-to-point
1043 communications and sequential computations. Now you can really use any
1044 model you want (of course, if you create real parallel tasks, which are
1045 not implemented in most models beside ptaskL07, this will abort).
1046 * Add an example that schedules a DAX on an heterogeneous platform
1047 using a Min-Min strategy.
1048 * New function SD_workstation_get_current_task() that returns the kind
1049 of task currently running on a workstation in the sequential access
1051 * Raise some warnings when unexecuted tasks remains at the end of the
1052 simulation. This is usually caused by cycles in the DAG.
1055 * New function: SIMIX_process_set_function() called by MSG_set_function
1056 * Change the underlying waiting queue in semaphores so that a process
1057 can wait on several of them simultaneously (as in waitany).
1058 * Fix the way to handle tokens in semaphores so that all access patterns
1059 work: {acquire, acquire_timeout, waitany} / {release, release_forever}.
1060 * kill the dirty pimple SIMIX_message_sizes_output()
1061 Please use (proper) visualization instead
1064 * New data container: setset (set of sets of elements)
1065 * New module: mmalloc (mapped malloc, allowing to have several
1066 independent segments of malloc)
1067 * New function: xbt_dict_cursor_set_data()
1068 * New functions: xbt_dynar_sort(), xbt_dynar_compare()
1069 * New function: xbt_dynar_is_empty()
1070 * New function: xbt_fifo_get_last_item()
1071 * Fix xbt_dynar_shrink(): use the right element size.
1072 * Fix xbt_dynar_set*(): allow index larger than current size and memset 0
1073 uninitialized areas during expand.
1074 * Fix semaphores: previous implementation was severely broken.
1075 * Use library init/fini functions for our initialization.
1076 - you can use logs and other feature as soon as you want in your
1077 code (even before the xbt_init / MSG_init)
1078 - xbt_exit is now a no-op and produce a warning when used.
1081 * Port GRAS to new SIMIX mechanisms. This allows gras users to
1082 benefit from the latest improvement to the simulation kernel.
1083 * Kill measurement sockets for now. If you rely on them, sorry. This
1084 release is not for you. This feature will be reintroduced in the
1085 future, but we cannot delay the release any further.
1086 * New function: gras_msgtype_get_name().
1087 * Implement gras_agent_spawn in RL too (the prototype changed a bit)
1088 * Fix (at last) the pmm example: it should not randomly fail anymore.
1090 Build chain: bug fixes and overall polishing
1091 * Cmake is now stable enough. Hence, we killed the autotools.
1092 * Port to windows ( TM :)
1093 * Fix the 'make install' target.
1094 No need to use 'make install-simgrid' anymore
1095 * Introduce a 'make dist' target compiling a *source* archive
1096 'make package' compiles a binary archive
1097 * Compile java files only on need
1098 * Add --cd and --setenv command line options to tesh
1099 * Out of source builds are not fully supported yet, but we are close
1100 * Enable supernovae and optimization flags by default for our users
1103 * Add layer to set up environment directly from lua, without XML.
1104 * The effect of gras_stub_generator can be achieved through
1105 lua too (check examples/gras/console/ping_generator.lua)
1107 -- Wed, 01 Dec 2010 22:09:23 +0100 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
1109 SimGrid (3.4.1) stable; urgency=low
1111 The "Polishing easter eggs is probably a good idea" release.
1112 This is a bug fixes release only.
1116 * Fix a bug preventing the tasks from begin garbage collected.
1119 * Fix a bug occuring when a host involved in a communication fails.
1120 This was not detected properly by the other peer involved in the
1121 communication. Now, it's reported as a network error.
1124 * Warn the user about loop dependencies in data flow of DAX files
1125 * Obey the control-flow dependencies of DAX files
1128 * Add option "enable_smpi" allowing to not compile SMPI.
1129 Probably useful for the (Mac) users experiencing a build error here
1130 * Improve the detection of lua5.1 and ruby1.8
1132 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Tus, 04 May 2010 28 16:11:16 +0100
1134 SimGrid (3.4) stable; urgency=low
1136 The "Easter in Cargese" release. Also known as (major changes):
1138 * the "se habla Java, Ruby 話せます, fala-se Lua (and deaf-friendly)"
1139 ~> bindings were greatly improved
1140 ~> new tracing infrastructure for better visualization introduced
1142 * the "Welcome to configury modernity" release.
1143 ~> we switched from autotools to cmake, and improved our cdash
1146 A more detailled list of changes follow (full detail in svn log).
1148 Java Bindings: Various Cleanups
1149 * (install java-gcj-compat-dev on debian-like to use them)
1150 * Remove put/get: no need to export deprecated interface in Java
1151 Use send/receive instead.
1152 * Cleanup the examples and add a README per directory
1153 * Remove example autoDestination (that's the only way to go now)
1154 * Remove example explicitDestination (was a plain copy of basic)
1155 * Make JniException a runtime exception, so that there is no need to
1156 declare the fact that you may encounter such a beast. I guess that
1157 nobody will ever want to survive such error.
1158 * Create specific errors for each MSG case of failure:
1159 host failure, transfer failure, timeout, task cancelled
1160 * Cleanup the exceptions that may get thrown by each function
1161 * Other internal cleanups in Java bindings. Performance still bad :/
1162 Ruby and Lua Bindings: create them
1163 * (install ruby1.8-dev/liblua5.1-0-dev on debian-like to use them)
1164 * That's new and great, you should try them out.
1165 Same functionalities than Java bindings, only even less polished
1167 * Kill the useless "rate" argument of SD_task_get_execution_time()
1168 Everyone used to provide -1 as a value, it was not used, and the
1169 semantic of a possible use wasn't even clear.
1170 * SD_SCHED_NO_COST: Constant to use as cost in SD_task_schedule()
1171 either as comm costs or compute costs to mean that there is no
1172 such thing for that specific task.
1173 * Add a SD_task_set_name() function
1174 * Fix SD_task_unschedule() on typed tasks
1175 * Fix SD_task_get_execution_time() to return seconds, not flop*sec
1176 * In DAX loader, accept useless 'level' attributes to <job> since
1177 LIGO DAGs have them (seem to be to ease graphical representation).
1179 * Add an example masterslave_mailbox.c using send/receive and not
1180 the deprecated put/get interface.
1181 * Kill the MSG_paje_output() function. It's a noop since 2 years.
1182 * Kill MSG_WARNING and MSG_FATAL return codes: they were not used
1184 * Rename MSG_TIMEOUT_FAILURE into MSG_TIMEOUT for sake of logic
1185 (declare MSG_USE_DEPRECATED to still have the old name)
1186 * Add a MSG_task_set_data() function
1187 * About trace replay (see examples/msg/actions):
1189 - Allow to work with splitted trace files for each process
1190 Give the specific trace file as argument of each process,
1191 and call MSG_action_trace_run(NULL)
1192 You can still have one merged file for all processes.
1193 - Fix implementation of collective operations
1194 * Allow task_execute() on 0-sized tasks (closes #10063)
1196 * This is the first release of SimGrid where SMPI is not considered
1197 beta anymore (even if some corners should still be improved)
1198 * Port over the new SIMIX_network submodule (internal refactoring)
1199 * Basic support to log events as with SMPE (use --cfg=SMPE:1)
1200 * Implement more missing elements of the standard:
1202 - MPI_MAXLOC MPI_MINLOC + all associated datatype MPI_DOUBLE_INT,
1204 - MPI_Address() MPI_Get_count() MPI_Type_free() MPI_Type_extent()
1205 MPI_Scan() MPI_Get_processor_name()
1206 - Added implementation of missing case for Alltoall (warning: it's
1207 *not* the bruck variant from OpenMPI; based on Alltoallv instead)
1208 - SMPI_MPI_Gather() SMPI_MPI_Gatherv() SMPI_MPI_Scatterv()
1209 SMPI_MPI_Reduce_scatter() SMPI_MPI_Allgather()
1210 SMPI_MPI_Allgatherv()
1211 * Bug fixes include:
1212 - MPI_Waitsome() was broken
1213 - Allow relative includes in smpicc
1214 - Command line cfg argument 'reference_speed' was ignored...
1215 - Some functions did not properly lead to auto-benching of user code
1216 - smpicc passes -O2 by default (just like openmpi one)
1218 * add SIMIX_action_suspend() and SIMIX_action_resume() functions
1219 * Bug fixes about timeouts during communications
1220 * add SIMIX_message_sizes_output() as a pimple to write to file the
1221 amount of messages per size. Use gnuplot to get histogram.
1222 Pimple because that's the only user-visible function of simix,
1223 defined directly in xbt.h (irk, sorry)
1225 - Add a SIMIX_sem_get_capacity() function
1226 - Fix interactions with processe resume/suspende
1227 - release_forever() was stupidly broken
1228 - Fix SIMIX_display_process_status() for processes in a semaphore
1229 - Make SIMIX_sem_block_onto() user-visible
1230 * Refactoring context stuff:
1231 - Use pseudo-OOP for better modularity
1232 - reimplement SIMIX_process_kill() without process_schedule() so
1233 that the latter can take as invariant that it is called from
1235 - Merge context_start into context_new for sake of simplicity
1237 * Add a Vivaldi network model, coded live during SUD'10 ;)
1238 * Rename configuration variables to start a hierarchy:
1239 o cpu_model -> cpu/model
1240 o network_model -> network/model
1241 o workstation_model -> workstation/model
1242 * New configuration variables:
1243 o network/bandwidth_factor: correction to bandwith
1244 o network/latency_factor: correction to latency
1245 o netwotk/weight_S: correction to the weight of competing streams
1246 * Add a long description to the models, that users can see with such
1247 argument on the command line: --cfg=cpu/model:help
1248 * --help-models display the long description of all known models
1250 * config: add the ability to set a default value after registration
1251 Does not override any previously set value (e.g. from cmd line)
1252 * dict: allow to have integer key and data.
1253 When so, you need to use the following functions
1254 void xbt_dicti_set(xbt_dict_t dict, uintptr_t key, uintptr_t data);
1255 uintptr_t xbt_dicti_get(xbt_dict_t dict, uintptr_t key);
1256 void xbt_dicti_remove(xbt_dict_t dict, uintptr_t key);
1257 In contrary to regular dicts, the key is not malloced before copy.
1258 Mixing scalar and regular elements in the same dict is not tested
1260 * Allow to use xbt_dynar_shrink() to expend the dynar instead
1261 Tracing for Visualization:
1262 * SimGrid is now instrumented in order to generate a trace file for
1263 visualization analysis: to use it, need to compile SimGrid with the
1264 "tracing" option enabled, and instrument the program using SimGrid with
1265 TRACE_start, TRACE_category, TRACE_msg_set_task_category and TRACE_end
1266 (among other functions).
1267 * The instrumentation only traces the platform utilization for now
1268 * Documentation to use the tracing functions and how to analyze the
1269 traces with the Triva tool is written.
1270 * More information about: SimGrid FAQ (in the section Tracing Simulations
1273 * We moved to cmake as default build system. Autotools support will
1274 be dropped soon. Check the FAQ for more info about how to use it.
1275 * Greatly improved our cdash/ctest interactions
1276 Check http://cdash.inria.fr/CDash/index.php?project=Simgrid
1277 * Added memory checking tests with valgrind; lot of memleak fixing.
1278 This may be the first release of simgrid with so few memory issues
1279 * Added code coverage tests.
1280 Our coverage is still improvable, but at least we see it on cdash.
1282 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Wed, 28 Apr 2010 28 17:11:16 +0100
1284 SimGrid (3.3.4) stable; urgency=low
1286 The "Desktop Grid needs love too" release (also called Xmas release).
1288 Models improvements:
1289 * Major speedup in the maxmin system solving by using lazy evaluation
1290 Instead of solving completely the maxmin system at each iteration,
1291 only invalidate (and recompute) the modified parts.
1292 This new feature is enabled in default models but you can try to
1293 turn it on with "--cfg:maxmin-selective-update=1" for other models.
1294 * Cas01 IMproved as default CPU model
1295 This CPU model is the same Cas01 model, but it uses the
1296 maxmin-selective-update flag and a heap structure to manage
1297 actions on SURF kernel.
1298 It reduces the complexity to find the next action to finish and,
1299 consequently, it's faster than the old Cas01.
1300 This is the new default CPU model (Cas01).
1301 * Rename the old Cas01 model to Cas01_fullupdate
1302 Keep the old cpu model Cas01 with the new name of Cas01_fullupdate.
1303 Use "--cfg=cpu_model:Cas01_fullupdate" to use the old default CPU model.
1304 * CpuTI (CPU Trace Integration)
1305 A new CPU model whose objective is simulate faster when using
1306 availability trace files.
1307 Instead of using a full featured, over engineered maxmin system for
1308 CPU modeling, this model does the pre-integration of traces files
1309 to calculate the amount of CPU power available, and so, executes
1310 faster than the old CPU models.
1311 Use "--cfg=cpu_model:CpuTI" to change to this CPU model.
1312 * Use LV08 as default network model since it gives better accuracy
1313 for small messages and shouldn't change things for big ones.
1314 Use --cfg=network_model:CM02 to get the previous behavior.
1317 ******************************************
1318 *DO NOT MIX 3.3.4 RESULTS WITH OLDER ONES*
1319 ******************************************
1320 * The new CPU model may changes simulations!
1321 The point is that events occurring at the exact same timestamp
1322 are not scheduled in the same order with the old and new
1323 version. This may be enough to completely change the execution
1324 of simulations in some cases.
1325 * The new network model will change simulations!
1326 This new model is more realistic than the previous one, so you
1327 should consider redoing your old experiments with this model.
1328 Sorry for the inconvenience.
1331 * Introduce the supernovae compilation mode
1332 When compiled that way, the whole SimGrid (or almost) is put in a
1333 single compilation unit and compiled in one shoot.
1334 This is to help gcc which has difficulties to inline stuff from one
1336 The speedup seem to be above 15%, althrough more tests are needed on
1337 amd64 to confirm that gain.
1340 * Port of MSG's mailbox on top of SIMIX network
1341 The put/get mechanism was greatly simplified on the way.
1344 * New SIMIX network module. Provides:
1345 - Mailbox: rendez-vous mecanism to find with who you want to speak
1346 - Synchronous send/recv: easier and hopefully faster since the
1347 logic is handled in the maestro process directly now
1348 - Asynchronous send/recv: you dreamt of it? It's here now
1349 Too bad that nobody cared enough to propagate the change to MSG.
1350 * Add semaphores as SIMIX synchronization mechanism.
1353 * new function SD_daxload(char*) to load a DAX file
1354 (see http://vtcpc.isi.edu/pegasus/index.php/WorkflowGenerator)
1355 * Introduce typed tasks. Specify its kind and cost at creation.
1356 At scheduling, just give where it should be placed, and the cost
1357 for each involved resource is automatically computed.
1358 Existing constructors so far (more to come of course):
1359 - SD_task_create_comm_e2e() for end-to-end communication
1360 - SD_task_create_comp_seq() for sequential computation
1361 Use SD_task_schedulev() / SD_task_schedulel() to schedule them.
1362 * new function SD_task_dump() for debuging display
1363 * new function SD_task_dotty(task,FILE*) writing to file the info
1364 about the task in dotty format
1365 * SD_task_dependency_exists() can now cope with having one of its
1366 arguments NULL. If so, it tests whether the other argument has any
1368 * Add getters on list of preceding/following tasks:
1369 SD_task_get_parents(task) and SD_task_get_children(task)
1370 * Add getters on amount of workstations and list:
1371 SD_task_get_workstation_count(t) and SD_task_get_workstation_list(t)
1372 * Add getter on task kind: SD_task_get_kind(task)
1373 * Update the start_time and finish_time of tasks on completion/failure
1374 * Bugfix: Remove task from state swags when destroyed
1377 * New function: void gras_cpu_burn(double flops) -- a simple CPU burner
1380 * New function: xbt_dynar_dopar(dynar,fun) to map a function over the
1381 dynar with one separate thread per value of the dynar.
1382 * Change the prototype of xbt_thread_create(), sorry.
1383 Added a boolean parameter indicating whether we want to join this
1384 thread (used in SG only for now)
1385 * Implement xbt_thread_join and xbt_thread_yield in SG also.
1388 * GTNetS wrappers should now be usable again (and betterly tested too)
1389 * Fix a major regression from 3.2 where the timeout provided to
1390 MSG_task_put_with_timeout() was used as absolute time before which
1391 the comm should be done.
1392 * Start to fix the <cluster> tag.
1393 - Internal links should be good now (beside of the loopback, which
1394 use the private link instead)
1395 - paths to the external world is still rather broken
1396 - the <route:multi> tag is just broken. Actually that's brain-dead.
1397 We need sth like <route:multi src="myCluster" dst="$*-${myCluster}">
1398 to make it less stupid
1399 ** Check your platform with teshsuite/simdag/platforms/flatifier **
1400 * Fix a source-level compatibility glitch from 3.2: after defining
1401 MSG_USE_DEPRECATED, you can use the old name
1402 MSG_task_put_with_time_out() for MSG_task_put_with_timeout()
1403 * Allow to compile from the SVN with automake 1.11
1404 * Fix some problems when using the "start_time" tag in deployment XMLs.
1405 * Fix #8569: XBT/synchro.h has redundant declarations
1406 * Fix #8563: MSG return values and exceptions
1407 Introduce a MSG_TIMEOUT_FAILURE return code and use it consistently.
1408 * Integrate patch #8636: Obey DESTDIR when installing documentation.
1409 Thanks to Robson Peixoto.
1410 * Fix a vicious bug in dictionaries inducing that some elements were
1411 not freed on xbt_dict_free()
1413 Portability report of this version:
1414 * Main portability targets:
1415 - linux (ubuntu (804/810/910) /debian (4/5/testing) /fedora (core11))
1416 on (amd64/i386/ia64)
1417 - mac leopard on i386
1418 Known problems: http://cdash.inria.fr/CDash/index.php?project=Simgrid
1419 but nothing critical.
1420 * Other platforms: windows, AIX and others were not tested for this release
1422 Timing report of this version:
1423 * Lazy evaluation brings arbitrary speedup (ie, speedup depending on
1424 scenario parameters). From 8h to a few seconds in desktop grid settings.
1425 * Supernovae brings about 25% speedup on i386.
1427 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Thu, 24 Dec 2009 19:07:39 +0100
1429 SimGrid (3.3.3) stable; urgency=low
1431 The "Need for Speed" release.
1433 The timings done to validate the 3.3.2 were faulty.
1434 Instead of being 5% faster, it was 15% slower (compared to 3.3.1).
1436 The problem was a conversion from a manually handled vector to
1437 xbt_dynar_t on the critical path.
1438 xbt_dynar_foreach calls functions, inducing stack management crap.
1440 We inlined these functions and xbt_dynar_foreach is now breath taking.
1441 We also inlined xbt_swag_belong on the way.
1443 Here are some approximate speedup measurements (on master/slaves
1444 simulations lasting between 10s and 20s each):
1445 3.3.1 -> 3.3.2: about same performance
1446 3.3.2 -> 3.3.3: 40% speedup
1447 3.3.1 -> 3.3.3: 40% speedup
1448 3.3.1 with inline patch -> 3.3.3: 30% speedup
1450 Our reading is that the refactoring which occurred in 3.3.2 made us
1451 suffer much more from the xbt_dynar_foreach low performance, but
1452 once we solved this, this refactoring proved to be very performance
1453 effective. From the 40% speedup, somehow, 10% are due to the
1454 inlining and 30% to the refactoring.
1456 That's a pitty that gcc cannot inline functions placed in other files
1457 alone. We have to choose between:
1458 - break the encapsulation (by putting private data structures and
1459 accessors in headers files to help gcc)
1460 - live with low performance
1461 - switch to a decent compiler such as icc (not quite possible).
1463 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Thu, 20 Aug 2009 21:21:33 +0200
1465 SimGrid (3.3.2) stable; urgency=low
1467 The "Simplicity does not preceed complexity, but follows it" release.
1469 The main contributors of this release were (lexical order):
1470 Silas De Munck, Stéphane Genaud, Martin Quinson, Cristian Rosa.
1473 * Extract the routing logic into its own object.
1474 (was dupplicated in network.c and workstation_LV07.c;
1475 Allows to implement other ways of storing that info)
1476 => kill now useless network_card concept
1477 - Use dynar to represent routes (instead of void** + int*)
1478 - kill link_set (use surf_network_model->resource_set instead)
1479 - Add a command-line option to choose the routing schema to use
1480 - Add three new models:
1481 * Floyd (shortest path computed at initialization)
1482 * Dijikstra (shortest path recomputed all the time)
1483 * Cached Dijikstra (shortest path computed on need)
1484 All these models where contributed by Silas De Munck, and are
1485 described in his ICCS09 paper.
1487 * Simplify model declaration
1488 (less redirections, less function to write when defining a model)
1489 - Factorize stuff between models:
1492 surf_model_resource_set(model)
1493 surf_model_resource_by_name(model, name)
1494 - Unify the types of models in s_surf_model_t (using an union)
1495 - Embeed fields of common_public directly into s_surf_model_t
1496 - Rename model methods:
1497 action_free ~> action_unref
1498 action_change_state ~> action_state_set
1499 action_get_state ~> action_state_get
1500 - Change model methods into functions :
1501 (model)->common_public->action_use ~> surf_action_ref
1503 * Implement a generic resource; use it as ancestor to specific ones
1504 (allows to kill duplicated code in models)
1505 Drawback: timer command don't need no name nor properties;
1506 workstation_CLM03 don't need no properties
1507 (but I guess we can live with those few bytes wasted)
1509 * Improve the action object model
1510 - implement a constructor avoiding dupplicated code about field
1511 initialization in generic_action part.
1513 * Kill the SDP model: it has an external dependency, is deprecated
1514 in flavor of modern lmm models, and didn't compile since a while
1517 * Relocation of the context module from XBT to SIMIX.
1518 (the context were decoupled from the simix processes, duplicating a lot of code)
1519 => a lot of code was factorized
1520 - less overhead is introduced during scheduling
1521 - simpler API for the context factory
1522 - the logic for process creation,destruction and manipulation was simplified
1523 * Simplification of the s_smx_process_t data structure.
1524 => accesing the simix level data associated to a process is faster now,
1525 and the code is a lot more readable.
1528 * Implement some more MPI primitives:
1529 MPI_Bcast, MPI_Waitany, MPI_Waitall, MPI_Reduce, MPI_Allreduce, MPI_Scatter, MPI_Sendrecv, MPI_Alltoall
1530 -implementation: Bcast: flat or 2-ary tree (default),
1531 Barrier: 4-ary tree,
1533 Allreduce: Reduce then Bcast
1534 Alltoall: "basic_linear" if data per proc < 3Kb, "otherwise pairwise".
1535 Not yet implemented: "Bruck" for data per proc < 200b and comm size > 12
1536 Alltoallv: flat tree, like ompi
1538 * Add support for optimized collectives (Bcast is now binomial by default)
1539 * Port smpirun and smpicc to OS X
1542 * Kill SD_link_get_properties: hard to maintain and makes very little sense
1543 Shout out if you used it.
1546 * Display the list of still queued messages in SG mode when existing
1550 * Add xbt_set_get_by_name_or_null() [Silas De Munck]
1551 * Add xbt_graph_node_get_outedges() [Silas De Munck]
1552 * Add xbt_str_from_file(FILE*)
1553 * Add xbt_dict_get_key achieving a linear reverse search
1554 * Remove the context module
1556 Portability report of this version:
1557 * Main portability targets:
1558 - Linux(debian)/x86/context
1559 - Linux(debian)/x86/pthreads
1560 - Linux(debian)/amd64/context
1561 - Linux(debian)/amd64/pthreads
1562 On these, we still have the eratic breakages of gras/pmm and
1563 amok/saturate_sg reported in previous version. We still think
1564 that the tests are the cause of the fault, not the tested code.
1566 - Mac OSX Leopard/x86/context
1567 Still false negative in tesh autotesting.
1568 Smpi still fails, but this time because readlink does not accept -f
1569 Everything seems to work properly beside of that.
1572 - AIX version 5.3 (only tested contexts this time)
1573 Smpi still fails there because mktemp is not installed.
1574 Everything seems to work properly beside of that.
1576 I managed to compile it for the first time, but several breakages.
1577 Won't delay the release for this exotic platform.
1579 * Windows: it's still lagging behind. If you want to help, please
1582 Timing report of this version:
1583 This version seem to be more than 5% faster than 3.3.1 (on linux
1584 64bits with contextes). The gain is less than expected, we are
1585 investigating this for next release.
1587 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Wed, 19 Aug 2009 17:07:12 +0200
1589 SimGrid (3.3.1) stable; urgency=low
1592 * Implement a --cfg-help to show existing configuration variables
1593 * Build chain do not require doxygen in maintainer mode
1596 * fix a bug on struct sizeof computation, which prevented the
1597 exchange of arrays of structs in some conditions
1598 - added a regression test about this in datadesc_usage
1599 * Allow the exchange of 0-long dynamic vectors.
1600 - for that, use -1 as indicator of dynamic size instead of 0
1601 - This implied to change any size from unsigned long to long,
1602 reducing a bit communication abilities, but I guess that with
1603 64bits being quite common, this is more than enough.
1604 - This also induce a protocol change, thus bumping network protocol
1605 version from 0 to 1 (if we have external users, we have to get
1606 clean on that point too ;)
1607 - added two regression tests about this in datadesc_usage
1608 * Be more verbose when propagating local exceptions
1609 This helps debugging.
1610 * Display the status of simulated processes when receiving SIGINT in
1614 * Allow to control the simulation from a trace file.
1615 New functions MSG_action_register() and MSG_action_trace_run()
1616 The first one allows to associate a function execution to each
1617 kind of action while the second one parses a trace file and
1618 triggers the corresponding actions within the system.
1619 For now, only a toy example is provided in examples/msg/actions
1620 * Add an exemple of process migration in examples/msg/migration
1621 * Fix a bug in task exchange which broke MSG_task_get_sender()
1622 Add a teshsuite regression test for that.
1623 [Bug: if MSG_task_get_sender() is called after sender exit,
1625 * Fix a bug which prevented suspend/resume to work properly
1626 * Display the status of simulated processes when receiving SIGINT
1627 This fixes a regression of v3.3. due to the introduction of SIMIX
1628 * Bug fixing in failure management:
1629 - trace could not start by a failure at time 0
1630 - failure during communications were not working
1633 * Add SIMIX_process_set_name() to change the name of the current
1634 process in the log messages.
1635 * Store smx_hosts in a dict since we only retrieve them by name
1636 * Move the configuration infrastructure to surf
1639 * Move the configuration infrastructure to surf
1642 * Massive internal cleanups:
1643 - Store internal structures on processes instead of hosts (allows
1644 to have more than one process per host, in addition of being more
1646 - Cleanup the initialization/finalization process
1647 - Kill a whole bunch of unneeded synchronization:
1648 processes run in exclusive manner within the simulator
1649 - Move queues from global tables to process data fields
1651 - now accept -platform and -hostfile arguments
1652 - Pass the right rank value to processes according to the hostfile
1653 * Compile the examples by default, and use them as regression tests
1654 * Implement MPI_Wtime()
1655 * Change the reference speed to a command line option
1658 * TCP_gamma can now be specified as command line option using
1659 --cfg=TCP_gamma:10000000.0
1660 * Change the --surf-path cmd line option into --cfg=path:
1663 * Also include strbuff from xbt.h public header
1664 * xbt_ex_display(): do not free the exception after displaying
1665 This allows to do more with the given exception afterward.
1666 Users should call xbt_ex_free() themselves.
1670 Portability report of this version:
1671 * Main portability targets:
1672 - Linux(debian)/x86/context
1673 - Linux(debian)/x86/pthreads
1674 - Linux(debian)/amd64/context
1675 - Linux(debian)/amd64/pthreads
1676 These targets fail about 1/10 of times on gras/pmm, but we believe
1677 that this is because of the test, not because of simgrid.
1678 amok/saturate_sg fails even more rarely, and the test may not be
1681 - Mac OSX Leopard/x86/context
1682 The test suite still spits tons of errors because some obscure
1683 force prevents us from removing the temporary directories
1684 arguing that they still contain some metadata I've never heard of.
1685 Smpi fails because seq is not installed.
1686 Everything seems to work properly beside of that.
1689 - AIX version 5.3 (both contexts and pthread)
1690 Smpi still fails there because mktemp is not installed.
1691 XML inclusions seems rosty on AIX.
1693 * Windows: it's still lagging behind. If you want to help, please
1696 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Sat, 27 Jun 2009 00:14:30 +0200
1698 SimGrid (3.3) stable; urgency=high
1702 * JAVA BINDINGS for MSG (you dreamt of them? We made them)
1703 [Malek Cherier & Mt]
1705 * Introduce the SIMIX module: factorize code between MSG and GRAS.
1708 Until now, GRAS were using MSG as an interface to SURF. It was
1709 quite difficult because both interface have several differences
1710 (MSG channels vs GRAS sockets were the most notable point).
1712 This also opens the gate to SMPI (which should occur soon) and speed
1713 up simulations by to 40% (even if it were not the main goal).
1715 **************************************
1716 *DO NOT MIX 3.2 RESULTS WITH 3.3 ONES* Simix may changes simulations!
1717 **************************************
1718 The point is that events occuring at the exact same timestamp are
1719 not scheduled in the same order with the old and new version. This
1720 may be enough to completely change the execution of simulations in
1721 some cases. Sorry for the inconvenience.
1723 * Cleanup and upgrade the XML format to push further scalability
1724 issues (check http://hal.inria.fr/inria-00256883/ for more info)
1726 * Improve the testing infrastructure with tesh. Now a very large part of
1727 the code is tested not only by being run but also by checking that the
1728 output match an expected output [Mt].
1730 * Move on to FleXML v1.7 for the embeeded XML parsers. This version
1731 is really less memory-demanding, which should allow you to use
1732 larger files in SimGrid [AL].
1734 * Inform valgrind about our contextes, so that it becomes usable
1735 with the default (and more effecient) version of SimGrid
1736 [contributed by Sékou Diakite, many thanks]
1739 * Introduce a listener thread in charge of receiving incoming
1740 messages from the network. It allows to overlap communication and
1741 computation but most notably, it removes some stupid deadlocks due
1742 to the fact that so far, a process could not send and receive at
1743 the same time. This made most non trivial communication schema
1745 * Convert the PIDs from long int to int to match the MSG ones (and
1746 linux ones too) [Mt]
1747 * New function: gras_agent_spawn() to launch a new process on
1748 current host. Only working in simulation for now. [Mt]
1749 * New function: gras_os_hostport() returning a constant form (ie,
1750 not needing to be freed) of "gras_os_hostname():gras_os_myport()"
1753 * Make the backtrace of exceptions more human readable [Mt]
1754 * New module: xbt/str [Mt]
1755 a ton of string utility functions (split, join, printf to a newly
1756 allocated buffer, trim, etc)
1757 * New module: xbt/hash [Mt]
1758 SHA1 hashing algorithm (more to come if needed)
1759 * New module: xbt/synchro [Mt]
1760 synchronization tools (mutex and conditions) working the same way
1761 in simulation and in real life (mainly useful for GRAS, but not
1763 * New module: xbt/queue [Mt]
1764 classical producer/consumer synchronization scheme
1765 * xbt_dynar_new_sync() creates a synchronized dynar. All access
1766 (using the classical functions will get serialized) [Mt]
1767 * Make dictionary internal table dynamic. No need to specify its size
1768 anymore; functions xbt_dict_new_ext() and xbt_dict_hashsize_set()
1770 * Make sure the log channels are organized as a tree under windows
1771 (because of ANSI C compatibility issue, any channel were child of
1772 root directly) [Mt].
1775 * Cleaned many thing in surf and fixed a few bugs [AL].
1776 * Add a nice command line configuration mechanism to compose models [AL].
1777 * Add a new model for parallel tasks (ptask_L07) that is less buggy than
1778 the previous one (KCCFLN05). It relies on something that looks like
1779 a max-min sharing mechanism but cannot be written as such. A new solver
1780 was thus designed [AL].
1781 * Add a new solver to lmm. Based on Lagrange optimization and
1782 gradient-based descent, it enables to efficiently maximise systems s.a
1784 sum f_i(x_i) s.t Ax<= b with A_{i,j}>=0 and f_i a concave function.
1786 This solver enables to propose two new network models for TCP Reno and
1787 TCP Vegas based on Low's work. These models still need to be fully
1788 tested though [Pedro Velho].
1791 * Bug fix in SD_simulate. Now the time bound given as argument is
1793 * Use the new parallel task model (ptask_L07) as default.
1794 * Use the SURF command line configuration mechanism.
1795 * 0-size tasks (for synchronization) should now work.
1797 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Sun Apr 12 05:20:36 CEST 2009
1799 SimGrid (3.2) stable; urgency=high
1803 We still experience issues on this platform, but we believe that at
1804 least MSG is usable.
1806 GRAS API BREAKAGE (for simplification purpose, sorry):
1807 * the gras_msgtype_by_name is not used anymore. Instead of
1808 gras_msg_send(toserver, gras_msgtype_by_name("request"), &request);
1809 you can write (and must)
1810 gras_msg_send(toserver, "request", &request);
1811 - If you still want to pass a gras_msgtype_t to the function (to cache
1812 the type and avoid the lookup time), use the gras_msg_send_() variant.
1813 - Impacted functions:
1814 gras_cb_register, gras_cb_unregister, gras_msg_send, gras_msg_wait,
1815 gras_msg_rpccall, gras_msg_rpc_async_call, gras_msg_wait_ext
1816 * The callbacks are now expected to return 0 when everything went well
1817 (just like the main() function)
1819 GRAS new features and improvements:
1820 * New module mecanism where user code can use per process globals [Mt]
1821 This is similar to gras_userdata_*() functions, but for libraries. It
1822 factorize some code developped over and over in the examples and AMOK.
1823 It has still to be documented and used (only amok/peermanagement is
1825 * Fix a vicious bug in the TCP buffering mecanism which leaded to message
1826 loss when they were small enough to fit into the buffer and sent quickly
1827 enough so that they can all get received in one shoot.
1828 * gras_datadesc_by_name and gras_msgtype_by_name: now raise an exception
1829 if not found. Use the *_or_null() variant for the old semantic.
1830 * In gras_msg_handle, do not discard messages without callback.
1831 They are probably messages to be explicitly awaited later (ie, proofs of
1832 mis-synchronization in userland since they are sent before being awaited)
1833 No big deal usually.
1834 * gras_socket_meas_send/recv: semantic changed!
1835 The numerical arguments used to be (1) the total amount of data to send
1836 and (2) msg_size. This was changed to (1) msg_size and (2) amount of
1837 messages. This was need for the fool willing to send more than MAXINT
1838 bytes on quite fat pipes.
1841 * Do really rename the hostmanagement module to peermanagement. [Mt]
1842 Ie, rename functions from amok_hm_* to amok_pm_*. This breaks the API,
1843 but this is rather new and this was documented in the module
1844 documentation (poor excuses, I admit)
1845 * Bandwidth measurement semantic changed! This follows the changes to
1846 gras_socket_meas_send/recv explained above.
1849 * A sequential mode has been added to the workstations. When a workstation
1850 is in sequential mode, it can execute only one task, and the other tasks
1851 are waiting in a FIFO. [Christophe Thiery]
1854 * The KCCFLN05 workstation model now handles parallel tasks. It is the
1855 model for SIMDAG. [Christophe Thiery]
1856 * Bug fix in the maxmin solver: Some values were close to 0 instead of
1857 equal to 0, which caused some bad behaviors in
1858 saturated_constraint_set_update. I now use a threshold mechanism like in
1862 * When running manually src/testall, you select specific units [Mt]
1863 testall is the result of our cunit mecanism, and should replace all
1864 the scripty thingy around since bash don't run easily on billware.
1866 * A mallocator system has been added. [Christophe Thiery]
1867 Mallocators allow you to recycle your unused objects instead of freeing them
1868 and allocating new ones.
1870 Documentation update:
1871 * FAQ reworking + New FAQs:
1872 - "Valgrind spits tons of errors!" [Mt]
1873 - "How to repport bugs" [Mt]
1874 - "Cross-compiling a Windows DLL of SimGrid from Linux" [Mt]
1875 - "What is the difference between MSG, SimDag, and GRAS?" [Mt]
1876 - Communication time measurement within MSG [AL]
1877 - I experience weird communication times when I change the latency [AL]
1878 * GRAS tutorial [Mt]
1880 - an introduction to the framework and to the used communication model
1881 - an initiatic tour introducing the most proheminent features:
1883 . Lesson 0: Installing GRAS
1884 . Lesson 1: Setting up your own project
1885 o Part 2: Message passing
1886 . Lesson 2: Exchanging simple messages
1887 . Lesson 3: Passing arguments to the processes (in SG)
1888 . Lesson 4: Attaching callbacks to messages
1889 . Lesson 5: Using globals in processes
1890 . Lesson 6: Logging informations properly
1891 . Lesson 7: Using internal timers
1892 . Lesson 8: Handling errors through exceptions
1893 . Lesson 9: Exchanging simple data
1894 . Lesson 10: Remote Procedure Calling (RPC)
1895 . Lesson 11: Explicitely waiting for messages
1896 . Recapping of message passing features in GRAS
1897 - A HOWTO section containing:
1898 o HOWTO design a GRAS application
1899 More are due, of course. They will come latter. In the meanwhile, you can
1900 check the examples which are still here.
1902 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri Mar 16 21:11:46 CET 2007
1904 SimGrid (3.1) stable; urgency=high
1908 There was a stack corruption somewhere, visible only when optimizing
1909 with these versions. [Vince]
1912 * This is a NEW module! SimDAG (SD for short) is a revival of the old SG
1913 module that enabled to play with Directed Acyclic Graphs. It is built
1914 directly on top of SURF and provides an API rather close to the old
1915 SG. Some old codes using SG are currently under rewrite to check that
1916 all needful functions are provided. [Christophe Thiery]
1919 * Complete rewrite of the KCCFLN05 workstation model. It is now an
1920 extension of the classical CLM03 model that gracefully handles
1921 failures. This is now the default model for MSG and GRAS. It doesn't
1922 handle parallel tasks yet though. [AL]
1923 * Bug fix: Weights were not correctly set in the network part.
1924 WARNING: This may have resulted in incorrect results with simulations
1925 where there are more than one flow on a given link. [AL]
1928 * After a (long ?) discussion on simgrid-devel, we have decided that the
1929 convention we had on units was stupid. That is why it has been decided
1930 to move from (MBits, MFlops, seconds) to (Bits, Flops, seconds).
1931 WARNING : This means that all previous platform files will not work as
1932 such with this version! A warning is issued to ask users to update
1934 A conversion script can be found in the contrib module of the CVS, under
1935 the name contrib/platform_generation/surfxml_update.pl [MQ]
1938 * Bug fix: Processes were started in reverse order, wrt deployment file.
1939 WARNING: if your code relies on this bug, please fix it. [AL]
1940 * Bug fix: Add a test in MSG_task_execute to stop whenever a task is
1941 being executed on two different locations. [AL]
1942 * Bug fix: Failures are now better supported thanks to Derrick's tests
1943 (there was many failure situations I hadn't thought of and that weren't
1944 correctly handled). [AL]
1945 * New function: MSG_host_is_avail indicates you whether a given m_host_t
1949 * New! a real RPC mecanism, as it ought to be since too long. [MQ]
1950 Exception occurring on server-side are propagated back to client (!).
1952 API CHANGE: the callback changed their prototype. Change:
1953 int my_handler(gras_socket_t expeditor, void *payload_data) {
1955 int my_handler(gras_msg_cb_ctx_t ctx , void *payload_data) {
1956 gras_socket_t expeditor=gras_msg_cb_ctx_from(ctx);
1958 * New! function: gras_msg_handleall to deal with all messages arriving
1959 within a given period.
1960 * New! function: gras_socket_server_range to get a server socket in a
1961 range of port numbers (ease to avoid port number conflicts) [MQ]
1962 * New! gras processes display their backtrace when they get a SIGUSR1
1963 or when Ctrl-C is pressed. Use Ctrl-C Ctrl-C to exit.
1964 Sweet to debug RL processes [MQ]
1968 - Do not force experiment sizes to be expressed in kb, or it becomes
1969 impossible to measure the latency this way (needs one byte-long tests)
1970 WARNING: this changes the amok_bw_* function semantic. [MQ]
1971 - Implements the link saturation stuff. [MQ]
1972 * Peer management module:
1973 New! module factorizing code that we wrote over and over [MQ].
1976 * New module: cunit (my jUnit implementation in ansi C) [MQ]
1977 - Test units are placed directly into the library code, they get extracted
1978 automatically and placed into the src/testall binary.
1979 - Convert most of the XBT tests to this system.
1980 * New functions: xbt_dynar_getfirst_as() and xbt_dynar_getlast_as() [MQ]
1981 * XML parsing: rewrote parts of flexml to enable multiple xml parsers to
1982 live in the same C code. This required to change a little bit the API
1983 of surfxml parsing but shouldn't be an issue for end-users. [AL]
1984 * New module: sparse graph structure with basic algorithms (this is work
1985 in progress and the API is not considered to be frozen yet). [AL]
1986 * Display more information on backtraces: source line & function names are
1987 now displayed just like valgrind does (rely on addr2line tool) [MQ]
1988 * New function: xbt_backtrace_display(). Sweet while debuging [MQ]
1989 * Reworked a little bit some #include statements to load only required
1990 headers. Some user code that relied on SimGrid to include stdlib or
1991 stdio may need to include it by themselves. [AL]
1992 * Fixed xbt/log.h. A missing SG_BEGIN_DECL prevented compilation with
1994 * Renamed xbt_host_t into xbt_peer_t since it betterly describes what I
1995 meant. This breaks the API of AMOK and of xbt/config. Sorry about this,
1996 but I guess that almost nobody used those parts. [MQ]
1998 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri, 14 Jul 2006 01:32:27 +0200
2000 SimGrid (3.0.1) stable; urgency=low
2003 * Unfortunately, I had missed 5 misnamed functions:
2004 xbt_fifo_item_t xbt_fifo_newitem(void);
2005 void xbt_fifo_freeitem(xbt_fifo_item_t);
2006 xbt_fifo_item_t xbt_fifo_getFirstItem(xbt_fifo_t l);
2007 xbt_fifo_item_t xbt_fifo_getNextItem(xbt_fifo_item_t i);
2008 xbt_fifo_item_t xbt_fifo_getPrevItem(xbt_fifo_item_t i);
2009 They're now deprecated. Please use their new versions:
2010 xbt_fifo_item_t xbt_fifo_new_item(void);
2011 void xbt_fifo_free_item(xbt_fifo_item_t);
2012 xbt_fifo_item_t xbt_fifo_get_first_item(xbt_fifo_t l);
2013 xbt_fifo_item_t xbt_fifo_get_next_item(xbt_fifo_item_t i);
2014 xbt_fifo_item_t xbt_fifo_get_prev_item(xbt_fifo_item_t i);
2016 * Bugfix: really disconnect fifo items which are remove_item()ed [AL]
2017 * Documentation: xbt_log module unmercifully reworked [MQ]
2018 * Bugfix: there was a problem with the ending of contexts with
2019 the pthread backend. It caused some weird deadlock or behavior
2020 depending on the pthread implementation. [AL]
2021 * Bugfix: get the exceptions raised in the simulator repport where
2022 and why they come from when they are not catched in time [AL, MQ]
2025 * Bugfix: Do repport the error when two non-connected hosts try to
2026 exchange data (Thanks to Flavien for stumbling into this one) [AL]
2029 * Add additionnal checkings on communications. Assert that two
2030 communicating hosts are connected by a set of links... [AL]
2033 * Add additionnal checkings on channel values in communication [AL]
2034 * New: MSG_task_get_source to see on which host a task was generated [HC]
2035 * New: int MSG_task_probe_from_host(int channel, m_host_t host): returns
2036 the number of tasks waiting to be received on channel and sent
2038 * New: MSG_error_t MSG_task_get_from_host(m_task_t * task, int channel, m_host_t host);
2039 waits for the first task coming from a given host.. [AL]
2041 GRAS new functionnalities: [MQ]
2042 * Enhance the parsing macro to allow the size of multidimentional objects
2043 to be given thru annotations.
2044 * New example (and documentation): Matrix Multiplication a la RPC
2045 (as when I was young!) and fix a bunch of bugs found on the way.
2047 GRAS performance improvements: [MQ]
2049 * Reduce the amount of cbps creation/destruction by making it static to
2050 datadesc_send/recv() and using a (newly created) cbps_reset (based on
2053 * Change libdata to a set so that we can search for stuff by ID (and thus
2054 reduce the insane amount of dict lookups)
2057 * Actually implement gras_datadesc_copy() so that we don't have to mimick
2058 RL communication on top of SG since it's so uneffective.
2059 It may also be used for inter-thread communication in RL, one day.
2060 * Use gras_datadesc_copy() to exchange messages on top of SG
2062 - improve message exchange performance on top of SG
2063 - deprecate transport_plugin_sg.c:gras_trp_sg_chunk_send() & recv()
2064 * Don't exchange on the network the size of the used part of buffer,
2065 instead, specify the possible buffer size to read().
2067 - reduces the amount of read/write calls (one pair per exchange)
2068 - reduces the amount of exchanged data (the size)
2069 - allows to retrieve all arrived data on receiver side, if we don't need
2070 it right now (subsequent read will peek the buffer)
2071 - allows the receiver to proceed with the begining of the stream before
2072 everything is arrived
2073 - make it possible to build an iov transport (using readv/writev)
2075 - take care of the data with non-stable storage (like stacked data),
2077 * If possible, TCP send uses vector I/O (when writev() is here)
2078 - Don't use it for receive since we send data sizes and data on the
2079 same stream, so we wouldn't be able to chain large amount of chunks
2080 before having to flush the stuff to read the size.
2081 * Rework the transport plugin mecanism to simplify it and reduce the
2082 amount of pointer dereferencement when searching for the right function
2085 * I guess that now, we do almost as few system calls as possible while
2086 doing as few data copy as possible.
2088 To improve it further, we could try to send all the sizes first and then
2089 all the data (to use iov on receiving size), but it's only a partial
2090 solution: when you have 2 dimensional data, the sizes of the second
2091 dimension is data of the first dimension, so you need 3 streams.
2093 I'm not sure the potential performance gains justify the coding burden.
2095 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri, 21 Oct 2005 14:42:20 +0200
2097 SimGrid (3.00) stable; urgency=high
2100 * New! Give the possibility to hijack the surf parser and thus bypass
2101 MSG_create_environment and MSG_launch_application. Have a look at
2102 examples/msg/msg_test_surfxml_bypassed.c to see how it can be done.
2104 -- Arnaud Legrand <simgrid-devel@lists.gforge.inria.fr> Sat, 20 Aug 2005 23:25:25 -0700
2106 SimGrid (2.96) unstable; urgency=low
2111 * New! Exception handling with setjmp or such (code from OSSP ex) [MQ]
2112 This deprecates the xbt_error_t mecanisms.
2113 It modifies (simplifies) all XBT and GRAS API.
2114 MSG API keeps unchanged (exceptions raised by XBT are catched from
2115 within MSG and masked with existing error handling facilities)
2118 * New! Add a FATPIPE model. [AL]
2119 * New! Add a parallel task model. [AL]
2120 * New! Add automatically a loopback interface (in the default
2121 network model) if none was precised.
2124 * Bugfix: MSG_process_resume now works with the current running process.
2126 * New! Add MSG_parallel_task_create and MSG_parallel_task_execute. [AL]
2127 * Modification of MSG_task_get_compute_duration. Once a task has been
2128 processed, the value returned by this function is now equal to 0. [AL]
2129 * New! Add double MSG_task_get_remaining_computation(m_task_t task) and
2130 MSG_error_t MSG_task_cancel(m_task_t task). Add a state
2131 (MSG_TASK_CANCELLED) to MSG_error_t corresponding to the cancelation
2132 of a m_task. For now, MSG_task_cancel only works with computation
2134 * New! Add double MSG_get_host_speed(m_host_t h) that returns the speed
2135 of the processor (in Mflop/s) regardless of the current load on the
2137 * API Change: use proper naming convention for MSG_getClock and
2138 MSG_process_isSuspended: MSG_get_clock and MSG_process_is_suspended.
2140 * New! Add void MSG_task_set_priority(m_task_t task, double priority).
2141 This function changes the priority of a computation task. This priority
2142 doesn't affect the transfer rate. A priority of 2 will make a task
2143 receive two times more cpu power than the other ones. This function
2144 has been added to suit the needs of Nguyen The Loc and hasn't been that
2145 much tested yet. So if it fails, please report it and send me your code.
2147 * API Change: removed all functions and types that were marked "deprecated"
2148 since many months. Renamed MSG_global_init_args to MSG_global_init.
2150 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Mon, 8 Aug 2005 17:58:47 -0700
2152 SimGrid (2.95) unstable; urgency=low
2155 * Steal some nice code to GNU pth to fix context detection and usage [AL]
2156 * Cleanup in the xbt_config API; add configuration callbacks. [MQ]
2157 * Cleanup in the initialization API: the unused "defaultlog" is dead. [MQ]
2160 * Bugfix: Allow absolute paths for platform description files [MQ]
2161 * Bugfix: do free the variables after use. Leads to drastic performance
2163 * Implement max_duration (ie, timeouts) on resources [AL]
2166 * Implement MSG_config to configure MSG at runtime. xbt_cfg test on a real
2168 * Implement MSG_channel_select_from() to help GRAS now that SURF provide
2169 the needed support (timeouts) [AL]
2172 * Implement measurement sockets. You can now get the bandwidth between two
2173 hosts thanks to AMOK (see below). [MQ]
2174 * gras_datadesc_dynar() builds a dynar type descriptor, allowing to send
2175 dynar over the network (yeah) [MQ]
2176 * Real (even if simplistic) implementation of gras_os_myname() on RL [MQ]
2177 * simple/static token-ring example. [Alexandre Colucci and MQ]
2178 * Use MSG_channel_select_from() and remove the *slow* hack we had to put
2179 in place before [MQ]
2182 * Differentiate the types "char[22]" and "unsigned char[22]" in automatic
2183 type parsing. "short" and "long" modifiers were also ignored; other
2184 modifier (such as reference level) are still ignored. [MQ]
2185 * Embeed the buffer size within the buffer itself on SG. [MQ]
2186 That way, send() are atomic and cannot get intermixed anymore (at least
2187 the ones which are less than 100k; bigger messages still have the issue)
2188 * Array size pushed by the field, not by the field type (or each
2189 and every long int will push stuff to the cbps) [MQ]
2190 * use select() to sleep since it allows to portably sleep less than one
2193 GRAS (minor cleanups)
2194 * <project>.Makefile.local (generated from gras_stub_generator) |MQ]:
2197 * Type Callbacks now receive the gras_datadesc_type_t they work on as argument.
2198 * type category 'ignored' killed as it was never used and were difficult
2200 * whether a type can cycle or not is now a flag, leaving room for more
2201 flags (as "ignored", if we feel the need one day ;)
2202 * Rename raw sockets to measurement sockets since "raw" has another
2203 meaning in networking community.
2206 * Advanced Metacomputing Overlay Kit introduction. It is based over GRAS
2207 and offers features not belonging to GRAS but that most applications
2208 need. One day, it may be a set of plugins loadable at runtime.
2209 * New module: bandwidth
2210 bandwidth measurement between arbitrary nodes running this module. [MQ]
2212 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Thu, 30 Jun 2005 16:29:20 -0700
2214 SimGrid (2.94) unstable; urgency=low
2216 The first beta release of SimGrid 3 !
2220 * Update the main page and the FAQ. Adding references to gforge.
2223 * Add a gras_os_getpid function.
2226 * Add MSG_task_get_compute_duration() and MSG_task_get_data_size()
2227 * Extend the logs so that they also print PID, hostname, date, ... if
2229 * Convert the MSG example to the use of xbt_logs instead of PRINT_MESSAGE,
2230 and kill the old version which were in testsuite/
2231 * Rewrite tools/MSG_visualization/colorize.pl for using with logs instead
2235 * Add xbt_os_time(). As the rest of xbt/portability, this is not public
2236 for users. Instead, each programming environment (GRAS, MSG,...) use it
2237 when needed to provide such a feature to users.
2238 Don't shortcut the mecanism or you will also shortcut the virtualization
2239 you need on the simulator.
2243 * Cleanups in configury with regard to compile optimization/warning flags.
2244 Also add -fno-loop-optimize to any powerpc since it's the optimization
2245 killing gcc (< 3.4.0).
2246 * Doxygen cleanups: move MSG examples, kill the second Doxygen phase
2247 needed by MSG examples complications
2248 * Borrow configury beautifications from PHP
2251 * Bugfix: XBT_LOG_NEW_DEFAULT_CATEGORY now compiles without compiler
2252 warning (thanks loris for stumbling into this one).
2253 * Bugfix: stop loading private headers (gras_config.h) from the public
2257 * Change SIMGRID_INSTALL_PATH to GRAS_ROOT in Makefiles generated for user.
2258 * Rename gras_get_my_fqdn to gras_os_myname and implement it in the simulator
2259 RL would imply a DNS resolver, which is *hard* to do in a portable way
2260 (and therefore delayed).
2261 * Implement a real timer mecanism and use it in timing macros. This allows
2262 to avoid rounding errors and get a 0.000005 sec precision in timing
2263 macros. While I was at it, various cleanups:
2264 - allow to declare more than one timed section per file (fix a stupid bug)
2265 - move some private declaration to the right place
2266 - merge conditional execution and timing macros into emulation module
2267 - document the module
2268 - make sure the module cleanups its mess on gras_exit
2269 * Documentation improvements:
2270 - (new) how to compile applications using GRAS
2271 - (new) emulation support (timing macros)
2273 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri, 13 May 2005 10:49:31 +0200
2275 SimGrid (2.93) unstable; urgency=low
2277 Alpha 4 on the path to SimGrid 3 (aka the "neuf-trois" version)
2280 - Use Paje properly where used. Still to be sanitized properly.
2281 - Portability fix: Add an implementation of the contexts using pthread
2285 - Add xbt_procname(): returns the name of the current process.
2286 Use it to show the current process's name in all logging.
2288 - fix detection of older flex version and the reaction, since we do
2289 depend on modern ones (we use lex_destroy)
2290 - Better separation of SG and RL in the libs: remove all simulation code
2291 from libgras. As a result, this lib is now only 200k when stripped.
2292 Some of the xbt modules may also be duplicated (two sets and such) and
2293 should be cleaned/killed before SG3.
2294 - Insist on using xlC on AIX because of weird problems involving gcc there.
2295 - Cleanup the make remote stuff. This is now done by scripts
2296 tools/graspe-{master,slave} (GRAS Platform Expender). This is still
2297 mainly for our private use, but we're working on changing them to user
2300 - Bugfix: flush the socket on close only if there is some *output*.
2301 - Bugfix: flush idempotent when there's nothing to send (don't send size=0)
2303 - Add MSG_task_get_name. The task names are mainly for debugging purpose,
2306 -- SimGrid team <simgrid2-users@listes.ens-lyon.fr> Fri, 4 Mar 2005 14:32:37 -0800
2308 SimGrid (2.92) unstable; urgency=low
2310 Alpha 3 on the path to SimGrid 3
2314 - New! First try of benchmarking macros.
2315 - New! First try so that gras_stub_generator generate deployment and
2316 remote compilation helpers.
2318 - Bugfix: Initialization fix in msg_test.
2322 - Bugfix: applied patch to lexer so that it doesn't need a huge heap.
2324 - Bugfix: let dicts work with NULL content (_foreach didn't) and cleanups
2326 - API Change: gras_os_sleep to take the amount of seconds as a double.
2327 Accepting an int was error prone since it was the only location where
2328 seconds were coded as such. It leaded to damn rounding errors.
2329 - Bugfix: Hard to belive that timers ever worked before this.
2331 -- SimGrid team <simgrid2-users@listes.ens-lyon.fr> Wed, 23 Feb 2005 22:09:21 +0100
2333 SimGrid (2.91) unstable; urgency=low
2335 Alpha 2 on the path to SimGrid 3
2339 - Bug fix in the lmm_solver.
2341 - New! Interface to Paje (see http://www-id.imag.fr/Logiciels/paje/)
2342 through the function MSG_paje_output.
2343 - New! Introducing two new functions MSG_process_kill() and MSG_process_killall().
2344 - It is possible to bound the rate of a communication in MSG with
2345 MSG_task_put_bounded() (was already in the previous version but I had forgotten
2346 to write it in the changelog).
2347 - Bug fix to let GRAS run on top of MSG until we move it directly on top
2352 - Various cleanups to the autotools stuff
2353 - Begin to move Gras examples to examples/gras/
2354 - Let make distcheck work again (yeah!)
2356 - documentation overhauled using doxygen.
2357 gtk-doc-tools is dead in SimGrid now.
2358 - Automatically extract all existing logging categories, and add the list
2359 to the documentation (long standing one, to say the less)
2361 - Cleanup the known architecture table. Reorder the entries to group what
2362 should be, and use a more consistent naming scheme.
2363 (some of the test dataset are still to be regenerated)
2364 - New! Allow library to register globals on each process just as userdata
2366 This is implemented using a xbt_dict and not a xbt_set, so we loose the
2367 lookup time (for now).
2368 Use it in msg and trp.
2369 This cleans a lot the internals and helps enforcing privacy of the
2370 headers between the gras components.
2371 - New! Add a timer mechanism, not unlike cron(8) and at(1).
2372 - Bugfix: gras_os_time was delirious in RL.
2373 - Bugfix: gras_trp_select/RL don't run into the wall when asked to select
2375 - Reenable GRAS now that it works.
2377 -- Arnaud Legrand <Arnaud.Legrand@imag.fr> Mon, 14 Feb 2005 14:02:13 -0800
2379 SimGrid (2.90) unstable; urgency=low
2381 Alpha 1 on the path to SimGrid 3
2383 * It is a long time since the last release of SimGrid. I'm sorry about
2384 that but as I had told you, I was rewriting a lot of things. I apologize
2385 to those who had been reporting bugs to me and that I had not answered.
2386 If your bug is still in the new version, please tell me. Here is a
2387 summary of the main changes.
2389 * REVOLUTION 1: The SimGrid project has merged with the GRAS project
2390 lead by Martin Quinson. As a consequence SimGrid gains a lot in
2391 portability, speed, and a lot more but you'll figure it out later.
2392 SimGrid now comprises 3 different projects : MSG, GRAS and SMPI.
2393 I wanted to release the new MSG as soon as possible and I have
2394 broken GRAS, which is the reason why, for now, only MSG is fully
2395 functional. A laconic description of these projects is available
2396 in the documentation.
2398 * REVOLUTION 2: I have removed SG and I am now using a new simulation
2399 kernel optimized for our needs (called SURF but only the developers
2400 should use it). Hence, MSG is now roughly 30 times faster and I think
2401 that by rewriting a little bit MSG, I could event speed it up a little
2402 bit more. Beside the gain in speed, it is also much easier to encode a
2403 new platform model with SURF than it was with SG. More to come...
2405 * REVOLUTION 3: I have tried to change a little as possible the API of
2406 MSG but a few things really had to disappear. The main differences
2407 with the previous version are :
2408 1) no more m_links_t and the corresponding functions. Platforms are
2409 directly read from a XML description and cannot be hard-coded
2410 anymore. The same format is used for application deployment
2411 description. The new format is described in the documentation.
2412 Have a look in tools/platform_generation. There is a tiny script
2413 that converts from the old platform format to the new one. Concerning
2414 the application deployment format, parsing the old one is tricky.
2415 I think most of you should however be able to convert your files. If
2416 it is really an issue, I can write a C code that does the conversion.
2418 2) the toolbox tbx does not exist anymore. We now have a library
2419 with much more data-structures but without the hash-tables (we have
2420 dictionaries that are much faster).
2422 -- Arnaud Legrand <Arnaud.Legrand@imag.fr> Mon, 31 Jan 2005 10:45:53 -0800
2424 *****************************************************************************
2425 * Follows the old GRAS changelog. It does not follow the same syntax, but I *
2426 * don't feel like converting the oldies. (Mt) *
2427 *****************************************************************************
2430 Version 2.90: "the long awaited one"
2431 - Finished rewriting and debugging MSG. Rewrote the documentation.
2432 - disable GRAS for now since it needs to be ported to the newest SG
2435 - Finish the port to windows (using mingw32 for cross-compile)
2438 - Main loop and datastructures of SURF. A cpu resource object is
2439 functional. Surf can thus be used to create cpu's with variable
2440 performance on which you can execute some actions.
2442 2004-11-15 Martin Quinson
2443 - Port to ARM. Simply added the alignment and size descriptions. Should
2444 work, but the ARM machines are so slow that I didn't had the opportunity
2445 to 'make check' over there yet.
2447 2004-11-15 Arnaud Legrand
2448 - Trace manager now written. It uses a heap structure and is therefore
2449 expected to be efficient. It may however be speeded up (particularly
2450 when many events occur at the same date) by using red and black
2451 trees. One day maybe...
2452 - Max-min linear system solver written. It uses a sparse matrix
2453 structure taking advantage of its expected use. Most operations are
2454 O(1) and free/calloc are called as few as possible. The computation of
2455 the minimum could however be improved by using a red and black tree
2458 2004-11-03 Arnaud Legrand
2459 - Rename every gras_* function that was in xbt/ to its xbt_
2461 - Add a heap and a doubly-linked list to xbt
2462 - Added a dichotomy to the dictionaries. make check works as well before
2463 so I assume that the patch is correct. I do not know however if things
2464 run effectively faster than before now. :)
2466 Inclusion of the SimGrid tree in the GRAS one. The archive is renamed to
2467 SimGrid, and the version number is bumped to 2.x
2469 2004-10-29 Martin Quinson
2470 - Introduction of the remote errors.
2471 They are the result of a RMI/RPC on the remote machine.
2472 ErrCodes being scalar values, you can't get the host on which those
2473 errors did happen. Extending the error mechanism as in Gnome is possible.
2474 No idea yet whether it is a good idea.
2476 2004-10-28 Martin Quinson
2477 - Interface revolution: the Starred Structure Eradication.
2478 I used to do typedef struct {} toto_t; and then handle *toto_t.
2479 Arnaud (and Oli) didn't like it, and I surrendered. Now, you have:
2480 - ???_t is a valid type (builded with typedef)
2481 - s_toto_t is a structure (access to fields with .)
2482 - s_toto is a structure needing 'struct' keyword to be used
2483 - e_toto_t is an enum
2484 - toto_t is an 'object' (struct*)
2486 typedef struct s_toto {} s_toto_t, *toto_t;
2487 typedef enum {} e_toto_t;
2488 Moreover, only toto_t (and e_toto_t) are public. The rest (mainly
2489 s_toto_t) is private.
2491 - While I was at it, all gras_<obj>_free() functions want a gras_<obj>_t*
2492 so that it can set the variable to NULL. It was so for dicts and sets,
2493 it changed for dynars.
2495 - Fix a bunch of memleaks in dict_remove
2496 - Fix a bug in sg/server_socket opening: it failed all the time.
2498 2004-10-07 Martin Quinson
2499 - Speed up dynar lookup operation a bit.
2501 gras_dynar_get is dead.
2503 Now, you can choose between gras_dynar_get_cpy (the old gras_dynar_get
2504 but should be avoided for efficiency reasons) and gras_dynar_get_ptr
2505 (which gives you the address of the stored data).
2507 gras_dynar_get_as is an helpful macro which allows you to retrieve a
2508 copy of the data using an affectation to do the job and not a memcpy.
2510 int toto = gras_dynar_get_as(dyn,0,int); rewrites itself to
2511 int toto = *(int*)gras_dynar_get_ptr(dyn,0);
2513 It does not really speedup the dynar test because they are
2514 setting elements all the time (and look them seldom). But the dict does
2515 far more lookup than setting.
2517 So, this brings the dict_crash test from ~33s to ~25s (200000 elms).
2519 2004-10-05 Martin Quinson
2520 - Allow to (en/dis)able the cycle detection at run time.
2522 Whether we should check for cycle or not is now a property of each
2523 datatype. When you think there may be some cycle, use datadesc_cycle_set.
2524 datadesc_cycle_unset allow to remove this property when previously set.
2526 Note that the cycle detection is off by default since it impacts the
2527 performance. Watch the data you feed GRAS with ;)
2529 This property is hereditary. Any element embedded in a structure having it
2530 set have it set for the time of this data exchange.
2532 You should set it both on sender and receiver side. If you don't set it on
2533 sender side, it will enter an endless loop. If you forget on receiver
2534 side, the cycles won't be recreated after communication.
2536 - Header reorganization.
2537 Kill gras_private.h, each submodule must load the headers it needs.
2539 2004-10-04 Martin Quinson
2540 - Interface revolution: do not try to survive to malloc failure.
2542 Now, gras_malloc and friends call gras_abort() on failure.
2543 As a conclusion, malloc_error is not a valid error anymore, and all
2544 functions for which it was the only gras_error_t return value are
2545 changed. They now return void, or there result directly.
2546 This simplify the API a lot.
2548 2004-09-29 Martin Quinson
2549 - Re-enable raw sockets.
2550 Created by gras_socket_{client,server}_ext;
2551 Used with gras_raw_{send,recv}
2554 It should allow to kill the last bits of gras first version soon.
2556 This is not completely satisfactory yet (duplicate code with
2557 chunk_{send,recv}; a bit out of the plugin mechanism), but it should
2560 - Simplify transport plugin (internal) interface by not passing any
2561 argument to _server and _client, but embedding them in the socket
2564 2004-09-28 Martin Quinson
2565 - Finish the port to AIX.
2566 autoconf was my problem (segfault within the malloc replacement
2567 function. No idea why)
2569 2004-09-16 Martin Quinson
2570 - Fix some size_t madness on 64bit architectures.
2572 2004-09-08 Martin Quinson
2573 - Reduce the number of system headers loaded, overload some more system
2574 calls (such as malloc to cast the result of the system one, and work
2576 - Fix and reintroduce the config support
2578 2004-09-07 Martin Quinson
2579 - Source code reorganization to allow Arnaud to surf all over there.
2580 - Allow to document the logging categories.
2581 - Remove all uppercase from logging categories and useless cleanup in names.
2583 2004-08-18 Martin Quinson
2584 Version 0.6.2 (protocol not changed; API changed)
2585 - Interface cleanup: gras_msgtype_by_name returns the type (instead of a
2586 gras_error_t), and NULL when not found. Functions expecting a msgtype
2587 as argument (msg_wait; msg_send) deal with NULL argument by providing a
2588 hopefully usefull message.
2589 - Portability to prehistoric sparcs again
2591 2004-08-17 Martin Quinson
2592 Version 0.6.1 (protocol not changed; ABI not changed)
2593 - prealloc some buffers to speed things up
2595 2004-08-11 Martin Quinson
2596 Version 0.6 (protocol not changed; ABI expended)
2597 - The parsing macro can deal with the references, provided that you add
2598 the relevant annotations (using GRAS_ANNOTE(size,field_name))
2600 2004-08-09 Martin Quinson
2601 Version 0.5 (protocol not changed; ABI changed)
2602 - Allow to off turn the cycle detection code in data exchange at
2603 compilation time. It should be at run time, but I'm short of time (and
2604 the config stuff is still broken). That way, we keep dict out of the
2605 critical path, which is good because the performance is poor:
2606 - search not dichotomial yet
2607 - dynar give no way to access their content and memcpy everytime
2608 - In composed data description (struct, ref and so on), stop foolness of
2609 keeping the subtype's ID, but store the type itself. This keeps sets out
2610 of the critical path, which is good since they rely on dynar and
2611 dictionnaries. The only loose of that is that we cannot detect the
2612 redeclaration of a structure/union with another content (but I'm not sure
2613 the code detected well this error before anyway). We still can detect
2614 the redefinition discrepancy for the other types.
2615 - Use a whole bunch of optimisation flags (plus -fno-strict-aliasing since
2616 it breaks the code because of type-punning used all over the place).
2617 This breaks on all non-gcc architectures (for now).
2619 All those changes (plus the buffer of last time) allow me to gain 2 order
2620 of magnitude on cruel tests consisting of 800000 array of integers on two
2621 level of a hierarchical structure (200 secondes -> 4 secondes)
2624 - the selector of reference must now return the type it points to, not
2625 the ID of this type.
2627 2004-08-06 Martin Quinson
2628 Version 0.4 (protocol changed; ABI not changed)
2629 - Allow to pass --gras-log argument to processes in simulation mode. Really.
2630 - New debugging level: trace (under debug) to see effect of GRAS_IN/OUT
2631 - Implement a buffer transport, and use it by default (it relies on tcp in
2632 real life and on sg in simulation).
2633 That's a bit hackish since I had a new field to the structure to store
2634 its data without interfering with the subtype ones. Inheritance
2635 is tricky in C. And that's a kind of reverse inheritance with one class
2636 derivating two classes. Or maybe a game with java interfaces. Anyway,
2637 that's damn hard in C (at least).
2638 Moreover, I got tired while trying to ensure plugin separation and
2639 genericity in SG mode. MSG wants me to do weird things, so let's go for
2640 cruel hacks (temporarily of course ;).
2641 See comment in transport_private.h:71
2642 - do not include all the _interface headers in private but in the files
2643 which really need them (to cut the compilation time when they are
2646 2004-07-26 Martin Quinson
2647 Version 0.3 (protocol not changed; ABI changed)
2648 - Major overhault of the datadesc interface to simplify it:
2649 - shorted the function names:
2650 s/gras_datadesc_declare_struct/gras_datadesc_struct/ and so on
2651 - add a trivial way to push/pop integers into the cbps without malloc.
2652 This allows to make really generic sub_type description, which simply
2653 pop their size of the stack.
2654 - add a function gras_datadesc_ref_pop_arr() which does what users want
2655 most of the time: Declare a dynamic array (which pops its size of the
2656 stack) and declare a reference to it. Poor name, but anyway.
2657 - kill the post-send callback, add a post-receive one
2659 2004-07-23 Martin Quinson
2660 Version 0.2 (protocol changed; ABI changed)
2661 - add some testing for cpbs in the test cases, and fix some more bugs.
2662 This invalidate again the little64 data file, since I cannot regenerate
2664 - remove an awfull optimization in the logging stuff, allowing me to:
2665 - understand it again
2666 - learn gcc how to check that the argument match the provided format
2667 - fix all errors revealed by gcc after that
2668 - internal keys of dict are not \0 terminated. Deal with it properly in
2669 loggings instead of segfaulting when the user want to see the logs :-/
2671 2004-07-22 Martin Quinson
2672 - Fix some stupid bug preventing cbps (callback postit) from working
2674 2004-07-21 Martin Quinson
2675 - Some documentation cleanups
2676 - remove the useless last argument of msgtype_declare
2677 - rename the Virtu functions to fit into the 'os' namespace
2678 - move headers src/include -> src/include/gras/ and stop fooling with
2679 gras -> . symbolic link
2680 - make distcheck is now successful
2682 2004-07-19 Martin Quinson
2684 - Build shared library also
2685 - Install html doc to the right location
2686 - stop removing maintainer files in make clean
2687 - build tests only on make check
2689 2004-07-13 Martin Quinson
2691 - No major issue in previous version => change versionning schema
2692 - Re-enable little64 convertion test now that Abdou kindly regenerated the
2693 corresponding dataset.
2695 2004-07-11 Martin Quinson
2697 - Get it working with any kind of structure (we can compute the padding
2698 bytes remotely for all the architectures I have access to)
2699 - Implement the structure parsing macro (still not quite robust/complete)
2700 - Improvement to the remote testing toysuite
2702 2004-07-10 Martin Quinson
2703 [autoconf mechanism]
2704 - get ride of a bunch of deprecated macros
2705 - actually run the test for two-compliment, not only compile it :-/
2706 - test whether the structures get packed (and bail out if yes. Damn.
2707 Alignment is a serious matter)
2708 - test whether the structures get compacted (but respecting the alignment
2709 constraints of each types)
2710 - test whether the array fields of structures can straddle alignment boundaries
2712 - Damnit, double are bigger than float (typo in creation of 'double' datadesc)
2713 (took me 2 hours to find that bug, looking at the wrong place)
2714 - Add gras_datadesc_declare_{union,struct}_close(). They must be used
2715 before sending/receiving and are used to compute the offsets of fields
2716 - Given that padding size depend even on compiler options, keep track of
2717 alignment and aligned_size only for the current architecture. Not a big
2718 deal since we send structure fields one after the other (seems
2720 - Add the datastructure used for IEEE paper by the PBIO guys to the test
2721 program, let it work on linux/gcc/little32. portability todo.
2723 2004-07-08 Martin Quinson
2724 - import and improve remote compilation support from FAST
2725 - make sure make check works on half a dozen of machines out there
2727 2004-07-07 Martin Quinson
2728 Let's say it's version 0.0.3 ;)
2729 - Implement conversions (yuhu!)
2730 - Let it work on solaris (beside conversion, of course)
2731 - Stupid me, using rand() to generate the conversion datatests in not wise.
2733 2004-07-06 Martin Quinson
2734 - Let make dist work, since I'm gonna need it to compile on remote hosts
2735 - Let Tests/datadesc_usage write the architecture on which the file was
2736 generated as first byte.
2737 - Add PowerPC (being also IRIX64), SPARC (also power4) and ALPHA
2738 architecture descriptions.
2739 - Add datadesc_usage.{i386,ppc,sparc} files being the result of execution
2740 on those architectures.
2741 - Optimization: send/recv array of scalar in one shoot
2743 2004-07-05 Martin Quinson
2744 - YEAH! GRAS/SG and GRAS/RL are both able to run the ping example !
2746 - Plug a whole bunch of memleaks
2747 - each process now have to call gras_{init,exit}. One day, their log
2748 settings will be separated
2749 - Continue the code factorisation between SG, RL and common in Transport.
2751 2004-07-04 Martin Quinson
2753 - Redistribution between SG and RL.
2754 We wanna have to accept in SG, so move accepted related parts of RL in
2755 the common part. (more precisely, the dynar of all known sockets is no
2756 more a static in transport.c, but part of the process_data)
2758 [gras_stub_generator]
2759 - Bug fix: Do call gras_process_init from gras_init (wasnt called in RL).
2761 2004-07-03 Martin Quinson
2762 - Create a new log channel tbx containing dict, set, log, dynar (to shut
2763 them all up in one shot)
2765 - Fix the ugly case of reference to dynamic array.
2766 - New (semi-public) function gras_datadesc_size to allow the messaging
2767 layer to malloc the needed space for the buffer.
2769 - gras_socket_close now expect the socket to close (and not its address to
2770 put NULL in it after it). This is because the socket passed to handlers
2771 is one of their argument (=> not writable).
2773 - propagate the interface cleanup from last week in datadesc, ie remove a
2774 superfluous level of indirection. User pass adress of variable
2775 containing data (both when sending and receiving), and not of a variable
2776 being a pointer to the data. Let's say that I like it better ;)
2777 The price for that is constructs like "int msg=*(int*)payload" in
2778 handlers, but it's a fine price, IMHO.
2780 - Let it work in RL (yuhu)
2782 2004-06-21 Martin Quinson
2784 - porting SG plugin and SG select to new standards (works almost).
2785 - plug memleaks and fix bugs around.
2788 - cleanup the prototype of data recv and force users to specify when they
2789 want to handle references to objects. Test case working even for cycles.
2790 - plug memleaks. Valgrind is perfectly ok with this.
2792 2004-06-12 Martin Quinson
2794 - cleanup the separation between plugin and main code in plugin creation
2796 2004-06-11 Martin Quinson
2798 - Reput hook for raw sockets, needed for BW experiments
2799 - kill a few lines of dead code
2800 [Data description] Interface cleanup
2801 - gras_datadesc_by_name returns the searched type or NULL.
2802 That way, no variable is needed to use a type desc once, which makes
2804 - gras_datadesc_declare_[struct|union]_append_name is removed. The last
2805 two parameters were strings (field name, type name), leading to
2807 [Dicos] Interface cleanup
2808 - gras_dico_retrieve -> gras_dico_get ; gras_dico_insert -> gras_dico_set
2809 This is consistant with the dynar API.
2811 2004-04-21 Martin Quinson
2813 - Porting to new standards.
2815 - interface cleanup.
2816 There is no bag anymore, no need to take extra provision to mask the
2817 pointers behind "ID".
2818 Better splitup of functions between files create/exchange/convert.
2819 This is still a bit artificial since convert and receive are so
2820 interleaved, but anyway.
2822 - add a queued message list to procdata (the ones not matching criteria
2824 - factorize some more code between SG and RL wrt procdata
2826 - use gras_exit in example to track memleaks
2827 - get rid of gs_example now that GS is properly integrated into gras
2828 - update run_test to integrate the latest tests (datadesc)
2830 - rename WARNINGn macros to WARNn since it prooved error-prone
2832 2004-04-19 Martin Quinson
2834 - register init/exit functions within gras module mechanism
2835 - send/receive function.
2836 Convertion is not implemented, but short-cutted if not needed.
2837 struct/array elements are sent one by one (instead of block-wise), but
2838 nobody really cares (yet). Get a prototype before optimizing.
2839 - tests (using a file socket) for DD send/receive on:
2840 - base types: int, float
2841 - array: fixed size, string (ie ref to dynamic string)
2842 - structure: homogeneous, heterogeneous
2843 - chained list, graph with cycle
2844 Believe it or not, valgrind is not too unhappy with the results. The
2845 cycle happily segfaults, but the others are ok. And I'm sick of pointers
2849 - Bugfix when using a filename explicitely (instead of '-')
2851 2004-04-09 Martin Quinson
2853 - factorize more code between RL and SG in socket creation
2854 - Complete the implementation and tests of:
2856 o file (only in RL, and mainly for debugging)
2858 I lost 3 days to design a portable address resolver, and then decided
2859 that the prototype mainly have to run on my box.
2860 Addressing portability too early may be like optimizing too early :-/
2862 - use gras_init in the Tests instead of the crappy parse_log_opt
2863 (the latter function is removed)
2864 [Conditional execution]
2865 - New functions: gras_if_RL/gras_if_SG (basic support for this)
2866 [Code reorganisation]
2867 - Get rid of libgrasutils.a since it makes more trouble than it solves.
2868 Build examples against the RL library, since there is no way to disable
2869 its creation for now.
2871 For information, the beginning of coding on GRAS was back in june
2872 2003. I guess that every line has been rewritten at least twice since