1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
19 INCLUDE(CheckCCompilerFlag)
20 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
22 ## Request full debugging flags
23 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
24 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
25 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
27 if (CMAKE_COMPILER_IS_GNUCC)
28 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
30 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
31 "You need a sufficient support of c++11 to compile SimGrid.")
35 ## We need a decent support of the c++11 standard
36 include(CheckCXXCompilerFlag)
37 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
38 if(COMPILER_SUPPORTS_CXX11)
39 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
42 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
43 "Please use a decent C++ compiler.")
46 ### And we need C11 standard, too
47 include(CheckCCompilerFlag)
48 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
49 if(COMPILER_SUPPORTS_C11)
50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
53 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
54 "Please use a decent C compiler "
55 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
57 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
58 ### gcc 4.[1-5] cannot compile ucontext on OSX
59 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
60 set(HAVE_UCONTEXT_H 0)
65 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
68 if ((NOT DEFINED enable_smpi) OR enable_smpi)
69 # First unset the compiler in case we're re-running cmake over a previous
70 # configuration where it was saved as smpiff
71 unset(CMAKE_Fortran_COMPILER)
75 enable_language(Fortran OPTIONAL)
78 if(CMAKE_Fortran_COMPILER)
79 # Fortran compiler detected: save it, then replace by smpiff
80 set(SAVED_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
81 set(CMAKE_Fortran_COMPILER smpiff)
83 endif(CMAKE_Fortran_COMPILER)
87 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
88 # Build the version number #
89 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
91 set(SIMGRID_VERSION_MAJOR "3")
92 set(SIMGRID_VERSION_MINOR "13")
93 set(SIMGRID_VERSION_PATCH "90")
94 set(SIMGRID_VERSION_EXTRA "-prealpha") # Extra words to add to version string (e.g. -rc1)
96 set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
98 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
99 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
101 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
104 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
106 set(libsimgrid_version "${release_version}")
107 set(libsimgrid-java_version "${release_version}")
109 ### SET THE LIBRARY EXTENSION
119 execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION)
120 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
122 ### Set the library providing dlopen
123 if("${CMAKE_SYSTEM}" MATCHES "Linux")
124 find_library(DL_LIBRARY dl)
125 endif("${CMAKE_SYSTEM}" MATCHES "Linux")
127 ### Find programs and paths
128 FIND_PROGRAM(GCOV_PATH gcov)
131 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
134 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
135 set(PythonInterp_FIND_VERSION 3)
136 set(PythonInterp_FIND_VERSION_COUNT 1)
137 set(PythonInterp_FIND_VERSION_MAJOR 3)
138 include(FindPythonInterp)
139 if(NOT PYTHONINTERP_FOUND)
140 message(FATAL_ERROR "Please install Python (version 3 or higher).")
144 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
145 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
147 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
149 ### Compute the include paths
151 ${CMAKE_HOME_DIRECTORY}
152 ${CMAKE_HOME_DIRECTORY}/include
153 ${CMAKE_HOME_DIRECTORY}/src/include
155 ${CMAKE_BINARY_DIR}/include
158 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
159 set(INCLUDES ${INCLUDES} /usr/include/)
163 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
164 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
165 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
166 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
167 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
168 unset(CMAKE_INCLUDE_WIN)
171 include_directories(${INCLUDES})
173 # library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
174 set(SIMGRID_DEP "-lm")
176 ### Determine the assembly flavor that we need today
177 set(HAVE_RAW_CONTEXTS 0)
178 include(CMakeDetermineSystem)
179 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
180 IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
181 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
182 set(PROCESSOR_i686 1)
183 set(PROCESSOR_x86_64 0)
185 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
186 set(PROCESSOR_i686 0)
187 set(PROCESSOR_x86_64 1)
190 message(STATUS "Disable fast raw contexts on Windows.")
192 set(HAVE_RAW_CONTEXTS 1)
195 set(PROCESSOR_i686 0)
196 set(PROCESSOR_x86_64 0)
199 include(CheckFunctionExists)
200 include(CheckTypeSize)
201 include(CheckIncludeFile)
202 include(CheckIncludeFiles)
203 include(CheckLibraryExists)
204 include(CheckSymbolExists)
207 include(FindGraphviz)
211 include(FindLuaSimgrid)
218 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
223 set(Boost_USE_STATIC_LIBS 1)
229 message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
233 find_package(Boost 1.48)
235 include_directories(${Boost_INCLUDE_DIRS})
238 message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
240 message(FATAL_ERROR "Failed to find Boost libraries."
241 "Did you install libboost-dev and libboost-context-dev?"
242 "(libboost-context-dev is optional)"
243 "SimGrid requires Boost >= 1.48.0")
247 #Boost context 1.61 will break compatibility with our implementation.
248 #Warn users about that
249 find_package(Boost 1.61 COMPONENTS context)
251 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
252 message("WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
255 set(HAVE_BOOST_CONTEXTS 0)
257 # Try again to see if we have libboost-context
258 find_package(Boost 1.42 COMPONENTS context)
259 set(Boost_FOUND 1) # We don't care of whether this component is missing
261 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
262 # We should use feature detection for this instead:
263 if (Boost_VERSION LESS 105600)
264 message("Found Boost.Context API v1")
265 set(HAVE_BOOST_CONTEXTS 1)
267 message("Found Boost.Context API v2")
268 set(HAVE_BOOST_CONTEXTS 2)
271 message (" boost : found.")
272 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
273 set(HAVE_BOOST_CONTEXTS 0)
277 # Checks for header libraries functions.
278 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
280 CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
281 if(NOT APPLE) # OS X El Capitan deprecates this function
282 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
284 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
285 set(HAVE_PTHREAD_SETAFFINITY 0)
286 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
288 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
289 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
291 # Use the GNU version of unusual modifiers like PRIx64
292 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
293 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
295 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
298 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
299 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
300 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
301 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
302 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
303 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
304 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
305 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
307 CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
308 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
309 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
310 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
311 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
312 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
313 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
314 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
315 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
317 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
319 # The detection of vasprintf fails on MinGW, assumingly because it's
320 # defined as an inline function in stdio.h instead of a regular
321 # function. So force the result to be 1 despite of the test.
322 set(HAVE_VASPRINTF 1)
325 #Check if __thread is defined
327 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
328 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
329 RESULT_VARIABLE HAVE_thread_storage_run)
330 file(REMOVE testprog)
331 if(HAVE_thread_storage_run)
332 set(HAVE_THREAD_LOCAL_STORAGE 1)
334 set(HAVE_THREAD_LOCAL_STORAGE 0)
337 if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux")
338 message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
339 set(enable_model-checking FALSE)
342 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
346 if(enable_model-checking)
347 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
349 SET(enable_model-checking 0)
358 if(enable_mallocators)
359 SET(HAVE_MALLOCATOR 1)
361 SET(HAVE_MALLOCATOR 0)
364 include(FindLibunwind)
367 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind")
369 # Apple forbids to link directly against its libunwind implementation
370 # So let's comply and link against the System framework
371 SET(SIMGRID_DEP "${SIMGRID_DEP} -lSystem")
373 if("${CMAKE_SYSTEM}" MATCHES "Linux")
374 set(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-ptrace")
375 # This supposes that the host machine is either an AMD or a X86.
376 # This is deeply wrong, and should be fixed by manually loading -lunwind-PLAT (FIXME)
378 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86_64")
380 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86")
384 if(enable_model-checking)
385 message(FATAL_ERROR "Please either install the libunwind7-dev package (or equivalent) or turn off the model-checking option of SimGrid.")
389 if(enable_model-checking)
393 SET(SIMGRID_DEP "${SIMGRID_DEP} -ldw")
399 if (enable_model-checking AND enable_ns3)
400 message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
405 if("${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
407 SET(HAVE_PRIVATIZATION 1)
409 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
410 SET(HAVE_PRIVATIZATION 0)
416 #--------------------------------------------------------------------------------------------------
417 ### Check for GNU dynamic linker
418 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
420 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
421 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
422 OUTPUT_VARIABLE HAVE_GNU_LD_compil
424 if(HAVE_GNU_LD_compil)
426 message(STATUS "Warning: test program toward GNU ld failed to compile:")
427 message(STATUS "${HAVE_GNU_LD_comp_output}")
429 execute_process(COMMAND ./test_gnu_ld
430 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
431 RESULT_VARIABLE HAVE_GNU_LD_run
432 OUTPUT_VARIABLE var_exec
435 if(NOT HAVE_GNU_LD_run)
437 message(STATUS "We are using GNU dynamic linker")
440 message(STATUS "Warning: error while checking for GNU ld:")
441 message(STATUS "Test output: '${var_exec}'")
442 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
444 file(REMOVE test_gnu_ld)
448 #--------------------------------------------------------------------------------------------------
449 ### Initialize of CONTEXT THREADS
451 set(HAVE_THREAD_CONTEXTS 0)
453 ### Test that we have a way to create semaphores
455 if(HAVE_SEM_OPEN_LIB)
456 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
457 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
458 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
461 # Test sem_open by compiling:
462 if(HAVE_SEM_OPEN_compil)
464 message(STATUS "Warning: sem_open not compilable")
465 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
468 message(STATUS "sem_open is compilable")
471 # If we're not crosscompiling, we check by executing the program:
472 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
473 execute_process(COMMAND ./sem_open
474 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
475 RESULT_VARIABLE HAVE_SEM_OPEN_run
476 OUTPUT_VARIABLE var_compil
478 if (NOT HAVE_SEM_OPEN_run)
480 message(STATUS "sem_open is executable")
483 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
484 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
486 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
488 message(STATUS "Warning: sem_open not executable")
489 message(STATUS "Compilation output: '${var_compil}'")
490 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
493 file(REMOVE sem_open)
498 if(HAVE_SEM_INIT_LIB)
499 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
500 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
501 RESULT_VARIABLE HAVE_SEM_INIT_run
502 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
504 # Test sem_init by compiling:
505 if(HAVE_SEM_INIT_compil)
507 message(STATUS "Warning: sem_init not compilable")
508 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
511 message(STATUS "sem_init is compilable")
514 # If we're not crosscompiling, we check by executing the program:
515 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
516 execute_process(COMMAND ./sem_init
517 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
518 RESULT_VARIABLE HAVE_SEM_INIT_run
519 OUTPUT_VARIABLE var_compil
521 if (NOT HAVE_SEM_INIT_run)
523 message(STATUS "sem_init is executable")
526 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
527 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
529 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
531 message(STATUS "Warning: sem_init not executable")
532 message(STATUS "Compilation output: '${var_compil}'")
533 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
536 file(REMOVE sem_init)
541 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
542 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
545 set(HAVE_THREAD_CONTEXTS 1)
546 message("-- Support for thread context factory ok.")
549 set(HAVE_UCONTEXT_CONTEXTS 0)
550 if(NOT HAVE_UCONTEXT_H)
551 message("-- No ucontext factory: <ucontext.h> not found.")
553 message("-- No ucontext factory: Apple don't want us to use them.")
554 set(HAVE_UCONTEXT_H 0)
556 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
557 OUTPUT_VARIABLE compile_makecontext_output)
559 #If can have both context
560 if(compile_makecontext)
561 set(HAVE_UCONTEXT_CONTEXTS 1)
562 message("-- Support for ucontext factory ok.")
564 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
565 message("-- No ucontext factory: makecontext() is not compilable.")
568 # Stack setup (size and address)
569 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
570 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
571 RUN_OUTPUT_VARIABLE stack_setup)
573 LIST(LENGTH stack_setup stack_setup_len)
574 if("${stack_setup_len}" STREQUAL "2")
575 LIST(GET stack_setup 0 makecontext_addr)
576 LIST(GET stack_setup 1 makecontext_size)
577 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
578 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
580 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
584 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
585 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
587 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
588 RUN_OUTPUT_VARIABLE stack
589 COPY_FILE test_stackgrowth)
591 if("${stack}" STREQUAL "down")
592 set(PTH_STACKGROWTH "-1")
593 elseif("${stack}" STREQUAL "up")
594 set(PTH_STACKGROWTH "1")
596 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
597 set(PTH_STACKGROWTH "-1")
598 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
599 set(PTH_STACKGROWTH "-1")
601 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
604 # If the test ran well, remove the test binary
605 file(REMOVE test_stackgrowth)
606 #--------------------------------------------------------------------------------------------------
608 ### check for addr2line
609 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
611 set(ADDR2LINE "${ADDR2LINE}/addr2line")
617 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
621 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
622 OUTPUT_VARIABLE remote
623 OUTPUT_STRIP_TRAILING_WHITESPACE)
624 #message(STATUS "Git remote: ${remote}")
625 execute_process(COMMAND git config --get remote.${remote}.url
626 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
628 OUTPUT_STRIP_TRAILING_WHITESPACE)
629 #message(STATUS "Git url: ${url}")
631 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
632 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
633 OUTPUT_VARIABLE GIT_VERSION
634 OUTPUT_STRIP_TRAILING_WHITESPACE)
635 message(STATUS "Git version: ${GIT_VERSION}")
637 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
638 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
639 OUTPUT_VARIABLE GIT_DATE
640 OUTPUT_STRIP_TRAILING_WHITESPACE)
641 message(STATUS "Git date: ${GIT_DATE}")
642 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
644 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
645 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
646 OUTPUT_VARIABLE SIMGRID_GITHASH
647 OUTPUT_STRIP_TRAILING_WHITESPACE)
649 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
650 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
653 ### Generate the required headers and scripts
654 #############################################
656 # gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default,
657 # but this too error prone. If you forget to include the config.h, you get weird segfaults.
658 # If you include it everywhere, everything gets recompiled everytime.
659 # So we include only where needed, and compile with -Wundef to notice the missing includes.
660 # But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H).
661 # So we have to make sure that everything got a decent value before generating the files.
662 foreach(var HAVE_BACKTRACE HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP HAVE_NANOSLEEP HAVE_POPEN
663 HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF
664 HAVE_UCONTEXT_H HAVE_UNISTD_H HAVE_VALGRIND_H HAVE_VASPRINTF)
672 # Avoid triggering a (full) rebuild by touching the files if they did not really change
673 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
674 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
675 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
676 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
677 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
678 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
680 # We need two versions of the SMPI scripts because they contain the path to the library
681 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
683 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
685 ### SMPI script used when simgrid is installed
686 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
687 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
688 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
689 set(libdir ${exec_prefix}/lib)
690 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
692 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
694 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
696 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
697 foreach(script cc cxx ff f90 run)
698 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
701 ### SMPI scripts used when compiling simgrid
702 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
703 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
704 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
705 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
706 set(libdir "${CMAKE_BINARY_DIR}/lib")
707 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
709 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
711 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
713 foreach(script cc cxx ff f90 run)
714 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
718 foreach(script cc cxx ff f90 run)
719 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
720 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
724 set(generated_headers_to_install
725 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
726 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
729 set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
731 set(generated_files_to_clean
733 ${generated_headers_to_install}
734 ${CMAKE_BINARY_DIR}/bin/smpicc
735 ${CMAKE_BINARY_DIR}/bin/smpicxx
736 ${CMAKE_BINARY_DIR}/bin/smpiff
737 ${CMAKE_BINARY_DIR}/bin/smpif90
738 ${CMAKE_BINARY_DIR}/bin/smpirun
739 ${CMAKE_BINARY_DIR}/bin/colorize
740 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
741 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
744 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
745 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
746 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
747 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
748 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
749 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
750 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
751 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
752 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
753 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
754 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
755 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
756 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
757 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
759 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
761 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
768 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
772 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
777 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
778 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
779 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
780 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
781 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
782 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
783 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
784 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
785 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
786 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
787 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
788 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
789 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
790 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
791 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
792 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
793 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
795 set(generated_files_to_clean
796 ${generated_files_to_clean}
797 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
798 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
799 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
800 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
801 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
802 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
803 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
804 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
805 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
806 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
807 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
808 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
809 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
810 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
812 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
819 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
823 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
828 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
829 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
830 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
831 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
832 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
833 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
834 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
835 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
836 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
837 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
838 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
839 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
840 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
841 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
842 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
843 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
844 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
848 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
849 "${generated_files_to_clean}")
851 ### Define source packages for Libs
852 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
854 ### Build some Maintainer files
855 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
856 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
858 ### Setup gcc & clang flags
860 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
865 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
867 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
871 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
875 if(enable_memcheck_xml)
876 set(enable_memcheck true)
881 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
882 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
884 ### Define subdirectories
885 foreach(cmakefile ${CMAKEFILES_TXT})
886 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
887 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
890 ### Setup the distrib
891 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
893 ### Build the docs if asked to
894 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
896 ### Print the result of configuration
898 message("##########################################")
899 message("#### Content of src/internal_config.h ####")
900 message("##########################################")
901 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
902 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
903 foreach(line ${config_output})
906 message("##########################################")
907 message("#### Content of simgrid_config.h ####")
908 message("##########################################")
909 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
910 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
911 foreach(line ${config_output})
914 message("##########################################")
915 message("#### End of configuration headers ####")
916 message("##########################################")
918 message("\nConfiguration of package `simgrid':")
919 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
920 message(" Build Name ..................: ${BUILDNAME}")
921 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
922 message(" Site ........................: ${SITE}")
923 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
925 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
927 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
930 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
931 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
932 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
933 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
934 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
936 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
937 message(" version .............: ${Java_VERSION_STRING}")
939 message(" SWIG ................: Version ${SWIG_VERSION} found.")
941 message(" SWIG ................: Missing.")
944 if(CMAKE_Fortran_COMPILER)
945 message(" Compiler: Fortran ...........: ${SAVED_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
946 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
948 message(" Linker: .....................: ${CMAKE_LINKER}")
949 message(" version .............: ${LINKER_VERSION}")
950 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
952 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
953 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
954 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
955 message(" with LTO ....................: ${enable_lto}")
959 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
961 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
965 message(" Compile Java ................: yes")
966 message(" Native lib in jar .........: ${enable_lib_in_jar}")
968 message(" Compile Java ................: NO")
970 message(" Compile Lua .................: ${HAVE_LUA}")
971 message(" Compile Smpi ................: ${HAVE_SMPI}")
972 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
973 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
974 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
975 message(" PAPI support...............: ${HAVE_PAPI}")
976 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
978 message(" Maintainer mode .............: ${enable_maintainer_mode}")
979 message(" Documentation................: ${enable_documentation}")
980 message(" Model checking ..............: ${HAVE_MC}")
981 message(" Jedule mode ................: ${HAVE_JEDULE}")
982 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
983 message(" Mallocators .................: ${enable_mallocators}")
985 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
988 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
989 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
990 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")