1 SimGrid (3.32.1) not released yet (target december 22)
4 - Activity::set_remaining() is not public anymore. Use for example
5 Comm::set_payload_size() to change the size of the simulated data.
8 - optimize an internal datastructure, leading to a potentially big
9 performance gain (in particular with many detached comms)
12 - New option smpi/barrier-collectives to add a barrier to some collectives
13 to detect dangerous code that /may/ work on some MPI implems.
16 - Write the section of the manual about models, at least.
17 - WiFi: the total capacity of a link depends on the amout of flows on that link.
18 - Use the nonlinear callback feature of LMM to reflect this.
19 - Calibration values can be changed to match different MCS configurations
20 - See the example teshsuite/models/wifi_usage_decay/wifi_usage_decay.cpp
21 - See also "A Flow-Level Wi-Fi Model for Large Scale Network Simulation"
22 https://hal.archives-ouvertes.fr/hal-03777726
23 - Merge parameters network/bandwidth-factor and smpi/bw-factor that serve the same purpose.
24 - Same for the latency
25 - Rewrite the corresponding documentation.
28 - Implement pthread_join in MC mode.
30 Fixed bugs (FG#.. -> FramaGit bugs; FG!.. -> FG merge requests)
31 (FG: issues on Framagit; GH: issues on GitHub)
32 - FG!118: Wi-Fi callback mechanism
33 - FG!119: SMPI: add option to inject a barrier before every collective call, to allow...
35 ----------------------------------------------------------------------------
37 SimGrid (3.32) October 3. 2022.
39 The Wiedervereinigung release. Germany was reunited 32 years ago.
42 - SimGrid now requires a compiler with C++17 support to compile the lib.
43 Our public headers still allow the user code to be compiled in C++14.
44 - Support graphviz v3 and ns-3 v3.36 (older versions are still supported).
45 - Tested with clang (v11, v13, v14 and v16), gcc (v7 to v13) and IntelCC v2022.2
49 - kill signal Comm::on_completion that was not working anyway.
50 - Expose signals Activity::on_suspend and Activity::on_resume
51 - New macro xbt_enforce(): similar to xbt_assert(), but throws an AssertionError
52 instead of calling abort().
53 - New: s4u::Exec::get_thread_count()
54 - Various cleanups around virtual machines:
55 - host_by_name() and friends now only return hosts. VMs are now excluded.
56 - It is now impossible to search a VM by name globally.
57 You can only search VM by name on a given PM, so either you know
58 the PM on which your VM runs and you can search by name, or you need
59 to manually iterate over all PMs to search this VM.
60 - The s4u::VirtualMachine constructor is now deprecated.
61 Please use s4u::Host::create_vm() instead.
62 - Rename s4u::VirtualMachine::on_creation() to on_vm_creation() to
63 avoid confusion with s4u:Host::on_creation() that is inherited.
64 Also s4u::VirtualMachine::on_destruction -> on_vm_destruction().
66 - One-sided communications (Comm::sendto) can now be detached,
67 and should now be more resilient to network and host faults.
70 - Added the following bindings / examples:
71 - Comm (now 100% covers the C++ interface):
72 - Comm.dst_data_size, Comm.mailbox, Comm.sender, Comm.start_time, Comm.finish_time
73 - Comm.state_str [examples: examples/python/comm-failure/, examples/python/comm-host2host/]
74 - Comm.remaining [examples: examples/python/comm-host2host/, examples/python/comm-suspend/]
75 - Comm.set_payload_size [example: examples/python/comm-host2host/]
76 - Comm.set_rate [example: examples/python/comm-throttling/]
77 - Comm.sendto, Comm.sendto_init, Comm.sendto_async [example: examples/python/comm-host2host/]
78 - Comm.start, Comm.suspend, Comm.resume [example: examples/python/comm-host2host/]
79 - Comm.test_any [example: examples/python/comm-testany/]
80 - Comm.wait_until [example: examples/python/comm-waituntil/]
82 - Engine.host_by_name [example: examples/python/comm-host2host/]
83 - Engine.mailbox_by_name_or_create [example: examples/python/comm-pingpong/]
85 - Mailbox: Mailbox.ready [example: examples/python/comm-ready/]
86 - Ptask [example: examples/python/exec-ptask/]:
87 - this_actor.exec_init
88 - this_actor.parallel_execute
91 - Added an AssertionError exception that may be thrown in case of error.
92 For instance, creating two hosts with the same name will now throw this exception
93 instead of killing the interpreter.
96 - Implement MPI_File_get_type_extent(), MPI_File_s/get_atomicity() and
97 MPI_File_get_byte_offset()
98 - Intercept getpid() calls to return the simulated ones.
99 - Fix various bugs in MPI IO.
101 Platform description & visualization:
102 - More robust sanity checks for platforms, to reject forbidden topologies with
103 a proper error message.
104 - New platform example: supernode.cpp and supernode.py.
105 The Python version generates a nice graphical representation of the platform.
106 - Bug fixes around fat-tree topologies.
107 - Allow to dump the platform topology as a CSV file representing the graph edges
108 with platform_graph_export_csv() (similar to the DOT export).
109 - Fix graphicator for "cluster" topologies (e.g. fat-tree, dragonfly).
112 - Fix a bug when using ptasks with multicores (FG!111).
115 - First bits of sthread, that intercepts pthread operations at runtime.
116 The intend is to use it together with simgrid-mc, but it is TBD.
117 - Sync MBI generators with upstream changes.
118 - Various cosmetics, small bug fixes and inner refactorings
120 Fixed bugs (FG#.. -> FramaGit bugs; FG!.. -> FG merge requests)
121 (FG: issues on Framagit; GH: issues on GitHub)
122 - FG#105: "Variable penalty should not be negative!" with in-flight messages and bandwidth profiles
123 - FG#109: Application time reported by --cfg=smpi/display-timing:yes is wrong
124 - FG#110: Wait_any does not trigger new model solve when host events occur
125 - FG#111: Wrong execution time in rare cases when using multicore
126 - FG!98: Re-enable the tests for legacy stochastic profiles
127 - FG!109: Trigger new engine solve upon host events such as host on/off
128 - FG!116: SMPI/replay: Fix issue with recv of size =0
130 ----------------------------------------------------------------------------
132 SimGrid (3.31) March 22. 2022.
134 The ненасильство release. We stand against war.
136 Against the agression by a sick system that forces peoples to take arms against each other.
139 - Rework the internals, for simpler and modern code. This shall unlock many future improvements.
140 - You can now define plugins onto the DFS explorer (previously called SafetyChecker), using the
141 declared signals. See CommunicationDeterminism for an example.
142 - Support mutex, semaphore and barrier in DPOR reduction
143 - Seems to work on Arm64 architectures too.
144 - Display a nice error message when ptrace is not usable.
145 - New test suite, imported from the MPI Bugs Initiative (MBI). Not all MBI generators are integrated yet.
146 - Remove the ISP test suite: it's not free software, and it's superseeded by MBI.
149 - fix for FG#100 by ensuring small asynchronous messages never overtake larger
150 ones, conforming to the standard.
151 - replay: fix waitall behaviour to avoid forgetting requests and leaking
153 - tracing: ensure that we dump the TI traces continuously during execution and
154 not just at the end, reducing memory cost and performance hit.
155 - Update OpenMPI collectives selection logic to match current one (4.1.2)
156 - Add a coherence check for collective operation order and root/MPI_Op
157 coherence. Potentially costly so not activated unless smpi:pendantic is set
158 or -analyze is given.
161 - New signal: Engine::on_simulation_start_cb()
162 - Introduce a new execution mode with this_actor::thread_execute(). This simulate
163 the execution of a certain amount of flops by multiple threads ran by a host. Each
164 thread executes the same number of flops, given as argument. An example of this new
165 function can be found in examples/cpp/exec-threads.
166 - Reimplementation of barriers natively.
167 Previously, they were implemented on top of s4u::Mutex and s4u::ConditionVariable.
168 The new version should be faster (and can be used in the model-checker).
169 - Actor::get_restart_count(): Returns the number of reboots that this actor did.
172 - MSG_barrier_destroy now expects a non-const msg_barrier parameter.
174 New plugin: the Chaos Monkey (killing actors at any time)
175 - Along with the new simgrid-monkey script, it tests whether your simulation
176 resists resource failures at any possible timestamp in your simulation.
177 - It is mostly intended to test the simgrid core in extreme conditions,
178 but some users may find it interesting too.
181 - New solver for parallel task: BMF.
182 - More realistic sharing of heterogeneous resources compared to the fair
183 bottleneck solver used by ptask_L07.
184 - Implement the BMF (Bottleneck max fairness) fairness.
185 - Improved resource sharing for parallel tasks with sub-flows (parallel
186 communications between same source and destination inside the ptask).
188 - "--cfg=host/model:ptask_L07 --cfg=host/solver:bmf": enable the ptask
189 model with BMF solver.
190 - "--cfg=bmf/max-iterations: <N>": maximum number of iterations performed
191 by BMF solver (default: 1000).
192 - "--cfg=bmf/precision: <N>": numerical precision used when computing
193 resource sharing (default: 1e-12).
194 - This model requires Eigen3 library. Make sure Eigen3 is installed to use BMF.
197 - Modifications of the Profile mechanism, with some impact on users
198 - Addition of a new (S4U) method to init profiles from generic functions to improve versatility
199 - Fix initial behaviour of state_profiles
200 - Modify periodicity to behave like a period, and not like a loop delay
203 - Drop xbt_dynar_shrink().
206 - Made the following bindings static (previously member functions):
207 - Actor: Actor.kill_all(), Actor.by_pid()
208 - Host: Host.by_name(), Host.current(), Host.on_creation_cb()
209 - Mailbox: Mailbox.by_name()
210 - Added the following bindings:
211 - this_actor.warning()
212 - Mailbox.put_init() [example: examples/python/comm-waitallfor/]
213 - Comm.detach() [example: examples/python/comm-waitallfor/]
214 - Comm.wait_for() [example: examples/python/comm-waitfor/]
215 - Comm.wait_any_for()
216 - Comm.wait_all_for() [example: examples/python/comm-waitallfor/]
217 - Mutex [example: examples/python/synchro-mutex/]
218 - Barrier [example: examples/python/synchro-barrier/]
219 - Semaphore [example: examples/python/synchro-semaphore/]
222 - Remove target "make uninstall" which was incomplete and no longer maintained.
224 Fixed bugs (FG#.. -> FramaGit bugs; FG!.. -> FG merge requests)
225 (FG: issues on Framagit; GH: issues on GitHub)
226 - FG#57: Mc SimGrid should test whether ptrace is usable
227 - FG#87: Smpi scripts fail with spaces in paths
228 - FG#100: [SMPI] Order of the message matching is not guaranteed
229 - FG#101: LGPL 2.1 is deprecated license
230 - FG#104: "make uninstall" not up-to-date
231 - GH#151: Missing mutexes for DPOR.
233 ----------------------------------------------------------------------------
235 SimGrid (3.30) January 30. 2022.
237 The Sunday Bloody Sunday release.
239 Main user-visible changes:
240 - The SimDag API for the simulation of the scheduling of Directed Acyclic
241 Graphs has been dropped. It was marked as deprecated for a couple of years.
242 We finally complete the implementation of what has been called SimDag++
243 internally, i.e., porting the different features of SimDag on top of S4U.
244 The new way to simulate the execution of dependent activities directly by
245 maestro (without any other actor) is details in the examples/cpp/dag-* series
247 - The removal of SimDag led us to also remove the export to Jedule files that
248 was tightly coupled to SimDag. The instrumentation of DAG simulation is still
249 possible through the regular instrumentation API based on the Paje format.
250 - We also dropped the old and clumsy Lua bindings to create platforms in a
251 programmatic way. It can be done in C++ in a much cleaner way now, which
252 motivates this suppression.
255 - Introduce on_X_cb() functions for all signals, to attach a new
256 callback to the signal X. The signal variables are now hidden and
257 only these functions should be used.
258 Rationale: this enables the usual deprecation scheme where functions
259 remain for 4 releases if we need to modify the signals, while the
260 current code with the signal variables directly visible prevents any
262 - New function: Engine::run_until(date), to split the simulation.
263 - New signal: Activity::on_veto, to detect when an activity fails to start.
264 - Signal change: Comm::on_start(Comm&, bool) has been replaced by
265 Comm::on_send and Comm::recv. These two signals respectively correspond to
266 when the sending or receiving side of a Comm is ready. They are raised at
267 the same locations as the former Comm::on_start signal.
268 - New function: Engine::track_vetoed_activities() to interrupt run()
269 when an activity fails to start, and to keep track of such activities.
270 Please see the corresponding example for more info.
271 - New functions: s4u::Comm::{sendto_init, set_source, set_destination} to enable
272 the use of vetoers with direct host-to-host communications. Both source and
273 destination have to set for a comm to start. Each call to these setters check
274 if all vetoes are satisfied. When it is the case, the comm starts. A use case of
275 these functions is given in examples/cpp/dag-scheduling.
276 - New functions: {Exec, Io}::update_priority allow you to modify the priority of
277 these kinds of activities during their execution. Behavior is detailed in
278 examples/cpp/io-priority/.
281 - Dynamic costs for MPI operations: New API to allow users to dynamically
282 change injected costs for MPI_Recv, MPI_Send and MPI_Isend operations.
283 Alternative for smpi/or, smpi/os and smpi/ois configuration options.
284 - Fix some issues with the replay mechanism.
287 - Function xbt::Extendable::get_data() is now templated with the type of the
288 pointee. Untyped function is deprecated. Use get_data<void>() if you still
289 want to retrieve void*.
292 - New section: "SimGrid MPI calibration of a Grid5000 cluster"
293 presenting how to properly calibrate MPI communications in SimGrid.
294 - Complete and reword the platform section, which is now completed.
297 - Thread contexts are used by default with Python bindings. Other kinds of
298 contexts revealed unstable, specially starting with pybind11 v2.8.0.
300 Fixed bugs (FG#.. -> FramaGit bugs; FG!.. -> FG merge requests)
301 (FG: issues on Framagit; GH: issues on GitHub)
302 - FG#95: Wrong computation time for multicore execution after pstate change
303 - FG#97: Wrong computation time for ptask+multicore+pstates
304 - FG#98: SMPI offline simulation is inconsistent with the online simulation
305 (deadlocks / message truncation)
306 - FG#99: Weird segfault when not sealing an host
308 ----------------------------------------------------------------------------
310 SimGrid (3.29) October 7. 2021
312 The "Ask a stupid question" release.
314 We wish that every user ask one question about SimGrid to celebrate.
315 On Mattermost, Stack Overflow or using the issues tracker.
317 New modeling features:
318 - Non-linear resource sharing, modeling resources whose performance heavily degrades with contention:
319 - The total capacity may be updated dynamically through a callback
320 and depends mainly on the number of concurrent flows.
321 - Examples (both cpp and python): io-degradation, network-nonlinear, exec-cpu-nonlinear
323 - Dynamic factors: model variability in the speed of activities
324 - Each action can now have a factor that affects its progression.
325 This multiplicative factor is applied when updating the amount of work
326 remaining, thereby an activity with factor=0.5 only uses half of the
327 instantaneous power/bandwidth it is allocated and will appear twice
328 slower than what it actually consumes.
329 - This can be used to model a overhead (e.g., there is a 20 bytes
330 header in a 480 bytes TCP packet so the factor 0.9583) but the novelty
331 is this factor can now easily be adjusted depending on activity's and
332 resources characteristics.
333 - This existed for network (e.g., the effective bandwidth depends
334 on the message in SMPI piecewise-linear network model) but it is now
335 more general (the factor may depend on the source and destination and
336 thus account to different behaviors for intra-node communications and
337 extra-node communications) and is available for CPUs (e.g., if you
338 want to model an affinity as in the "Unrelated Machines" problem in
339 scheduling) and disks (e.g., if you want to model a stochastic
341 - For that, resources can be provided with a callback that computes
342 the activity factor when creating the action.
343 - Example: examples/cpp/exec-cpu-factors
344 - The same mechanism is also available for the latency, which
345 allows to easily introduce complex variability patterns.
348 - Added support to programmatic platform creation in Python.
349 Example: examples/python/clusters-multicpu
352 - Disk and Host now have a set_sharing_policy() too, for non-linear sharing.
353 This can only be set through the API, not through XML files.
357 - Multiple fixes to ensure reproducibility of tracing
358 - scan/excan can now be replayed
359 - wait action now uses ranks and not pid, as the other ones.
360 - smpi/init and smpi/finalization-barrier are now valid for replays.
361 - exit() is now intercepted by SMPI to avoid premature shutdown of
362 simulation. First non 0 return codes is returned as simulation return
366 * New section "Release Notes" documenting recent and current developments.
367 * New section "Modeling I/O: the realistic way" presenting how to properly model disks in SimGrid.
368 * Improvements in API Reference for C++ and Python interfaces.
371 - Make wifi creation compatible with ns-3 version 3.34 too.
373 Fixed bugs (FG#.. -> FramaGit bugs; FG!.. -> FG merge requests)
374 (FG: issues on Framagit; GH: issues on GitHub)
375 - FG#77: Search feature of doc is broken (update sphinx theme version)
376 - FG#78: Multiple fixes for SMPI replay:
377 - TI tracing of allotallv/w was outputting wrong values
378 - MPI_LOGICAL in fortran is actually 32 bits wide, and not 8.
380 ----------------------------------------------------------------------------
382 SimGrid (3.28) July 14. 2021
384 The Victoriadagarna Release.
387 - C++ platform interface: Users can now describe their platform directly in C++.
388 This provides greatly flexibility and performance improvement for complex
389 platforms. Main features:
390 - Fat-Tree/DragonFly/Torus composing: allows you to create clusters of
391 "zones", instead of single hosts. This feature enables the description
392 of clusters with complex hosts, composed of several CPUs, GPUs, etc.
393 - StarZone: new zone with a Star-like topology. The routes are defined
394 as a set of links used to communicate from node to everybody (node<->ALL).
395 - Split-Duplex links: auxiliary method to create split-duplex links in
396 the platform, easing its utilisation. It automatically creates both UP
397 and DOWN links (similarly as done in XML).
398 - Please refer to the documentation and the examples included:
399 e.g. examples/cpp/clusters-multicpu/ and examples/platforms/*.cpp.
400 - New plugin: Producer-Consumer with monitor. Just requires to include the
401 include/simgrid/plugins/ProducerConsumer.hpp header to be used. See the
402 associated example (examples/cpp/plugin-prodcons).
405 - New: s4u::Comm::wait_all_for() (like s4u::Comm::wait_all, but with a timeout),
406 s4u::Io::wait_any(), s4u::Io::wait_any_for().
407 - Methods test_all/test_any/wait_all/wait_any in s4u now take their vector
408 parameter by reference, instead of a pointer.
409 - Fixed a bug where Activity::wait_for() killed the activity on timeout.
410 Explicitly cancel the activity to get back to previous behavior.
411 - New: Link::set_concurrency_limit() to limit the amount of concurrent flows.
414 - The default SMPI compiler flags are no more taken from the environment.
415 They can be explicitly set through cmake parameters SMPI_C_FLAGS,
416 SMPI_CXX_FLAGS, or SMPI_Fortran_FLAGS.
418 --cfg=smpi/finalization-barrier: which can be used to add
419 a barrier inside MPI_Finalize. This can help for some codes which cleanup
420 data attached to a process, but still used in other SMPI processes.
421 --cfg=smpi/errors-are-fatal: True by default, behaves like if MPI_ERRORS_RETURN
422 is active when set to false, to keep going after a small error
423 --cfg=smpi/pedantic: True by default. Do not report some harmless MPI errors
424 which may or may not be problematic in the end.
426 - fix behaviour, as maximum iteration count could be ignored
427 - add SMPI_SAMPLE_LOCAL_TAG and SMPI_SAMPLE_GLOBAL_TAG macros, to allow user to
428 use sampling when the same kernel is called with a different set of parameters
429 which have an impact on the timing.
430 - realloc is now intercepted, to be coherent, as malloc/calloc/free were already.
431 It should now work with smpi/auto-shared-malloc-thresh.
432 - Improve error handling and reporting in multiple places
433 - Improve correctness checks on the MPI code.(MPI_Op and MPI_Datatype
434 validity checks, truncated messages are now an error, return errors
435 when explicitely deleted handles are reused, ...)
436 - RMA: multiple fixes and stability improvements.
437 - analysis (-analyze flag in smpirun):
438 - SMPI can now report buffer leaks as well as MPI handles leaks,
439 if code was compiled without SMPI_NO_OVERRIDE_MALLOC.
440 - if -trace-call-location is used when compiling, SMPI can report
441 origin of leaked handles/buffers
442 - group leaks by type/origin in output message if possible
443 - New implemented MPI calls: MPI_Comm_test_inter
446 - Changed internal implementation of bandwidth factors in network models.
447 Models affected: CM02, LV08 (default), SMPI, IB.
448 Configuration affected: "network/bandwidth-factors" and "smpi/bw-factors".
449 Bandwidth factors are applied to communications to describe that users
450 cannot use 100% of the available bandwidth. For example, the default network model,
451 LV08, applies a factor of 0.97 to the bandwidth. In older versions, this
452 behavior was implemented by limiting the bandwidth available in the LMM
453 system for this flow. This may give the false impression that there is
454 bandwidth available for other flows due to its underutilization, especially
455 for the dynamic bandwidth factors used in SMPI models.
456 To avoid this, we have modified the implementation so that each flow uses the
457 maximum physical bandwidth according to the LMM system.
458 However, the actual throughput of the flow seen by the user is defined by
459 the physical bandwidth multiplied by the bandwidth factor.
460 This change impacts on the simulation results for all network models on
461 which we have bandwidth factors configured.
462 *****************************************
463 *DO NOT MIX 3.28 RESULTS WITH OLDER ONES*
464 *****************************************
465 This change may impact on the timing of your simulation results.
466 Take care when comparing simulations from different SimGrid's
467 versions. Sorry for the inconvenience.
468 - Dynamic network factors: users can configure a callback to define
469 the network factors dynamically. This API is available at
470 simgrid::kernel::resource::NetworkModelIntf.
471 - Users have access to complete information about the current communication
472 to decide which factor to apply. This includes: message size, source and
473 destination hosts, links and zones traversed.
474 - Dynamic factors for both latency and bandwidth.
475 - For more details, see the example in (examples/cpp/network-factors).
476 - Plugin host_energy: the "watt_off" and "watt_per_state" host properties,
477 deprecated since version 3.24, are no longer supported. Instead, use
478 "wattage_off" and "wattage_per_state".
481 - xbt_assert is not disabled anymore, even when built with enable_debug=off.
484 - New tutorial: Model-checking and formal assessment
485 - New sections: "Demystifying the routing" and "C++ platforms"
486 - Update and improve the part on visualization in MPI and Algo tutorials.
487 - Improve the section on routing: how to define it, how it's used internally
488 - Fix many issues, broken links and missing references in doxygen and Sphinx
491 - Lua platform files are deprecated. Their support will be dropped after v3.31.
494 - Legacy functions deprecated in this release: SIMIX_get_clock(), SIMIX_run().
496 Fixed bugs (FG#.. -> FramaGit bugs; FG!.. -> FG merge requests)
497 (FG: issues on Framagit; GH: issues on GitHub)
498 - FG#47: Complete and fix tests from teshuite/s4u/activity-lifecycle
499 - FG#64: Configuring smpi/IB-penalty-factors
500 - FG#67: Running computation concurrently with MPI_Iallreduce
501 - FG#69: Tutorial misleading users of pre-v3.26 versions of SimGrid
502 - FG#71: Segmentation fault on invalid gw_src/gw_dst
503 - GH#322: Issue when an actor kills his host vm
505 ----------------------------------------------------------------------------
507 SimGrid (3.27) March 29. 2021
509 The Ragnar Release (anniversary of the siege of Paris by Vikings in 845)
511 Main user-visible changes:
512 - All functions marked as deprecated for one year were removed.
513 - Removed all that was related to the "Storage" type in all APIs and bindings.
514 "Disks" have been introduced more than a year ago to replace them for the better.
515 It's time to finish this replacement.
516 - SMPI ABI breaks from previous version: MPI global handles (predefined datatypes,
517 ops, COMM_WORLD) are now defined differently, and can be used in initializers,
518 avoiding "initializer element is not constant" errors with some codes. Please be
519 careful to recompile your MPI codes if switching to this new SimGrid version.
520 - Network model ns-3 now requires version ns-3.28 or higher.
521 - Removed some option aliases that were deprecated since v3.23 (June 2019)
522 - 'verbose-exit' is now 'debug/verbose-exit'
523 - 'simix/breakpoint' is now 'debug/breakpoint'
524 - 'clean-atexit' is now 'debug/clean-atexit'
527 - New functions: Comm::sendto_{init,async} to initiate a communication
528 on between two (possibly remote) hosts.
529 - Define new template functions Mailbox::get_unique(), returning a std::unique_ptr.
530 - Functions Mailbox::get() and Mailbox::get_async() are now templated with the
531 type of the pointee. Untyped functions are deprecated. Use Mailbox::get<void>()
532 or Mailbox::get_async<void>() if you really want to play with void*.
533 - Unify the interface of Activity::on_{start/activity}
534 - New function: Comm::get_dst_data()
535 - New function: Comm::set_payload_size() to set the amount of bytes to simulate.
538 - ptask should now work better with multicore hosts (FG#37).
539 - Internal cleanups and refactoring around activities, to prepare for SimDAG++.
540 - Internal cleanups and refactoring around models, to prepare for programmatic
542 - Modernize our tests of the performance models
546 - New section: Configuring the logs from the command line.
547 - New section: Programming API of logs.
548 - New section: Getting realistic results
549 - New section: Examples of SMPI Usage
550 - New part: SimGrid's Internals, with a section on Design goals
551 - Move back to the classical Breathe tool chain, and fix many small glitches.
554 - Handle leak checking: SMPI will now display a message if MPI handles are still
555 present at the end of a simulation. Option smpi/list-leaks:n will display the n
556 first leaked pointers and their types.
557 - smpi/display-allocs option : Display Memory allocations analysis, with hints
558 about the largest allocations. This only works for allocations with malloc/calloc
559 and not compiled with SMPI_NO_OVERRIDE_MALLOC
560 - "-analyze" option in smpirun will activate smpi/display-allocs and smpi/display-timing
561 - New implemented MPI calls: MPI_File_set_size, MPI_Aint_add, MPI_Aint_diff,
562 MPI_Type_get_extent_x, MPI_Type_get_true_extent_x, MPI_Status_set_elements_x
563 - Support for MPI C++ datatypes (MPI_CXX_BOOL, MPI_CXX_FLOAT_COMPLEX,
564 MPI_CXX_DOUBLE_COMPLEX, MPI_CXX_LONG_DOUBLE_COMPLEX)
565 - Replay now opens and parses the trace file only once for all ranks when possible.
567 - better handling of MPI_PROC_NULL
568 - MPI_Group_incl was broken in some cases
569 - PAPI tracing now fixed
570 - MPI_Errhandlers are properly handled for MPI_COMM_WORLD
571 - SMPI will now fail properly when receive size < sent size, instead of
572 just setting MPI_ERR_TRUNCATE and keep going.
573 - Proxy Apps ( https://framagit.org/simgrid/SMPI-proxy-apps ):
574 - Remove useless build patches and split build/run patches on the page
575 - Build in parallel when possible
576 - Test on yum-based systems
577 - New nightly tested Proxy-apps:
578 - OpenMPI mpi-test-suite
579 - Coral MCB, LSMS, Qbox, CLOMP
580 - ECP/Mantevo Cloverleaf3D, Ember
581 - Codevault bhtree_mpi
584 - Only initialize the Dwarf parser when needed, saving 10 seconds in most cases.
585 - Start to overhaul the implementation to modernize it (still ongoing).
588 - Drop simgrid::xbt::demangle(). Please use boost::core::demangle() instead.
589 - Drop xbt_dynar_cursor_rm(), xbt_dynar_search_or_negative(),
590 xbt_str_split_quoted(), xbt_str_split_quoted_in_place().
591 - Deprecate xbt_dynar_to_array().
592 - When an exception occurs in kernel mode, display both the actor and kernel stacks.
594 C binding and interface:
595 - Rename (lowercase) functions sg_actor_get_PID, sg_actor_get_PPID, sg_actor_by_PID.
596 - Constness requirement has been lowered for parameter argv of sg_actor_start()
597 and sg_actor_create() It's now (char* const*). The previous version is still
598 available as sg_actor_start_() and sg_actor_create_().
600 Fixed bugs (FG#.. -> FramaGit bugs; FG!.. -> FG merge requests)
601 (FG: issues on Framagit; GH: issues on GitHub)
602 - FG#37: Parallel tasks are limited to 1 core per host
603 - FG#62: Running "smpirun -replay" on large networks
604 - FG!46: Fix a few potential memory leaks in SMPI colls
605 - GH#343: Wrong consumed energy when an exec timeouts
607 ----------------------------------------------------------------------------
609 SimGrid (3.26) December 15. 2020
611 The Release release (the French lockdown was eased today).
613 Important user-visible changes:
614 - SimGrid now requires a compiler with C++14 support.
615 Sibling projects should upgrade their FindSimgrid.cmake
616 - Surf precision default value is now 1e-9, instead of 1e-5. This was changed as
617 several users had difficulties to understand issues when using high bandwidth or
618 small latency events. The new value was already the default for SMPI and
619 should not cause too much performance hit. It can change some simulation
620 timings if simulation was skipping a lot of small events (which was actually
621 an issue per see). The old value can be restored with --cfg=surf/precision:1e-5.
622 - On some network models (L07, CM02, LV08), an implicit loopback link is created
623 for local communication. Default bandwidth was 500MBps and latency was 15µs,
624 which was rather bad. Default values have been changed to 10GBps and 0 latency.
625 Options network/loopback-lat and network/loopback-bw have been added to adapt
626 these values if needed. Network and routing models already providing separate
627 loopbacks (clusters and such) are not impacted by this change.
628 - SMPI now adds 16 bytes of header to each message sent, in order to simulate
629 metadata that are added to each MPI message by MPI libraries (tag,
630 src/dest, and communicator information). This may change simulation times
631 for very small message sizes, but should be more realistic.
634 - New routing 'WiFi' that makes it easier to specify a wifi network zone.
635 - New plugins: wifi_energy and link_load. See the associated examples.
636 - New examples: wifi networks, and communication suspend.
639 - LTO is now enabled for Intel/clang compilers.
640 - LTO behavior on GCC can be parameterized using LTO_EXTRA_FLAG in cmake.
641 Setting it to "auto" will use all available cores, while setting it to n will
642 use n cores to speedup link step (usage: cmake -DLTO_EXTRA_FLAG=4).
643 - Remove obsolete runtime option 'contexts/parallel-threshold'.
644 - Runtime option 'tracing/msg/process' renamed to 'tracing/actor'. The old name
645 has been kept for compatibility.
646 - Finally remove obsolete snake_case() aliases for runtime options.
647 - Further improve the documentation.
650 - the on_exit() of each actor is also executed when the simulation deadlocks.
651 - New functions: s4u::Activity:: suspend(), resume() and is_suspended()
652 An example is provided for s4u::Comm but it should work with Exec and Io.
655 - Update proxy apps coverage of new ECP apps: 60+ apps now tested nightly on
656 https://framagit.org/simgrid/SMPI-proxy-apps
657 - MPI/IO: supports names starting with "./"
658 - Fortran: many MPI/IO bindings, support for MPI_UB/LB, C MPI_INT/FLOAT/DOUBLE
660 - smpicc/cxx/ff/f90 now will actually perform definition checks at link time. When
661 building shared libraries, this may cause issues, so environment variable
662 SMPI_NO_UNDEFINED_CHECK can be added to disable this.
663 - most temporary files should now be created in /tmp dir (or equivalent).
664 If this one does not allow execution of code (noexec flag), this may cause issues.
665 Please use another tmp directory (using TMPDIR or equivalent system variable)
669 - A large refactoring is ongoing, but this should be transparent for users so far.
672 - Drop xbt_str_split().
674 C binding and interface:
675 - The return type of the sg_actor_on_exit() callbacks is now 'void'
676 (int value was previously ignored)
677 - Many C functions were renamed to follow a common naming style
678 (sg_object_get_something and sg_object_set_something). As usual, the deprecated
679 names are kept until version 3.30.
680 - Many MSG tests were converted to the new S4U's interface in C, that
681 was extended for that.
683 Fixed bugs (FG#.. -> FramaGit bugs; FG!.. -> FG merge requests)
684 (FG: issues on Framagit; GF: issues on GForge; GH: issues on GitHub)
685 - FG#41: Add sg_actor_create C interface
686 - FG#43: xbt::random needs some care
687 - FG#48: The Impossible Did Happen (yet again)
688 - FG#50: Suspending an actor executed at the current timestamp fails
689 - FG#52: Zero-seconds timeout : "That's in the past already"
690 - FG#53: Crash while using ns-3 network model
691 - FG#54: How to suspend a comm?
692 - FG!22: Stochastic Profiles
693 - FG!24: Documentation and fix for xbt/random
694 - FG!35: Add a modeling hint for parallel links in doc
695 - FG!36: [xbt/random] Read/Write the state of the RNG
696 - FG!42: Link cumulated load plugin
697 - FG!44: Test condition variable wait_until+notify_all
698 - GF#18137: Allow different stack sizes?
699 - GH#128: Parallelization of simulation with --cfg=contexts/nthreads
700 - GH#139: Allow pthread creation in SMPI
701 - GH#336: Packet-level simulation using SMPI?
702 - GH#345: Error in the LMM while migrating a VM
703 - GH#346: [SMPI] error while loading shared libraries: libsimgrid.so
704 - GH#352: pip install / python setup.py install fail to find pybind11
705 - GH!337: Fix link_energy plugin for wifi platforms
706 - GH!339: Add Mailbox set_receiver method to python binding
707 - GH!344: Cast hugepages macros parameters to int64
709 ----------------------------------------------------------------------------
711 SimGrid (3.25) February 2. 2020 (aka 02 02 2020)
713 The Palindrom Day Release.
715 Important user-visible changes:
716 - Improve the Python usability (stability and documentation).
717 - A nasty synchronization bug was ironed out, see also below.
718 - Python's doc was organized as a separate tree, now integrated with C++.
719 - C bindings of S4U were not part of the doc.
720 - The C++ doc was also improved as methods are now split by theme.
721 - Further deprecate MSG: you now have to pass -Denable_msg=ON to cmake.
722 - This is mandatory to use the Java bindings.
723 - OFF by default; The plan is to completely remove MSG by 2020Q4 or 2021Q1.
724 - SimDAG++: Automatic dependencies on S4U activities (experimental)
725 - Some features are already implemented but not all of them
726 - Cannot block an activity until it's scheduled on a resource
727 - No heterogeneous wait_any() that would mix Exec/Comm/Io activities.
728 - See examples/s4u/{io,exec,comm}-dependent for what's already there.
731 - Upgrade documented Java dependency to Java 8 (earlier versions don't work).
732 - Drop support for Viva/Triva (old visualization tools), hence removed
733 TRACE_get_node_types() and TRACE_get_edge_types() functions.
736 - Require pybind11 version 2.4.
737 - Greatly improve locking during context switches with Python.
738 - Declaring Python callbacks to this_actor::on_exit is now working.
739 - No more tests are failing currently, even on win32.
742 - Actor: Merge signals on_migration_start/end into on_host_change
743 - Actor: Rename migrate() into set_host()
744 - Disk: Allow users to get the read and write nominal bandwidth values
745 - Exec: Implement wait_for(timeout)
746 - Io: Implement wait_for(timeout)
749 - Parse errors now raise a simgrid::ParseError that you may want to catch.
752 - In simgrid::kernel::resource::Model, the methods next_occuring_event*() have
753 been renamed to fix a spelling error. As usual, the previous definitions are
754 kept with a deprecation warning. However, to avoid runtime errors, it is now
755 forbidden to override these deprecated methods in a derived class. Please use
756 the new names immediately if you need to override them.
759 - Remove unused parameter 'free_ctn' for xbt_dict_set() and xbt_dict_set_ext().
760 - Drop unused functions for dicts and dynars: xbt_dict_cursor_get_elm,
761 xbt_dict_get, xbt_dict_get_elm, xbt_dict_get_ext, xbt_dict_get_key,
762 xbt_dict_remove, xbt_dict_reset, xbt_dynar_compare, xbt_dynar_dump,
763 xbt_dynar_foreach_ptr, xbt_dynar_free_data, xbt_dynar_free_voidp,
764 xbt_dynar_init, xbt_dynar_insert_at_as, xbt_dynar_merge,
765 xbt_dynar_remove_n_at, xbt_dynar_replace, xbt_dynar_search, xbt_dynar_set.
766 - New module: random, providing classical random numbers generators.
769 - New option : "smpi/auto-shared-malloc-thresh" which sets a value for
770 allocations' size above which they are considered "shared" by default (as if
771 they were performed through SMPI_SHARED_MALLOC macros).
772 Default = 0 = disabled feature.
773 Note : malloc, calloc and free are now overridden by smpicc/cxx by default.
774 This can cause some troubles if codes are already overriding these. If this
775 is the case, defining SMPI_NO_OVERRIDE_MALLOC in the compilation flags can
776 help, but will make this feature unusable.
777 - Input check is now performed much more consistently and outputs precise
778 warnings for each error found
779 - New supported calls : MPI_File_set_view, MPI_File_get_view
780 - MPI I/O now only supports disks, as storage is discontinued.
781 - MPI I/O allows opening files without specifying absolute path
782 - Note : SMPI configuration options are now initialized by smpi_init_options()
783 call, which should be called if SMPI is not being used through smpirun.
785 Fixed bugs (FG#.. -> framagit bugs; FG!.. -> framagit merge requests):
786 - FG#9: Python bindings crashing
787 - FG#39: Missing s4u::Comm::wait_any_for example
788 - FG#42: Add support for ThreadSanitizer (TSan)
789 - FG!19: Removing RngStream
790 - FG!20: A module for RNG calls
791 - FG!21: Choice between ad-hoc and standard distributions implementations
793 - FG!25: Fix link in Mutex doc
794 - FG!26: Fix links in SMPI interface doc
795 - GH#31: [MC] please provide an option to make MPI_Send asynchronous
796 - GH#305: Unscheduled tasks are still excuted
797 - GH#313: smpirun: manual outdated w.r.t. --help
798 - GH#321: [S4U] Get task remaining work ratio
799 - GH#323: Crash when an actor turn off his physical host
800 - GH#335: Missing links on dragonfly example svg
801 - https://lists.gforge.inria.fr/pipermail/simgrid-user/2019-November/004653.html:
802 MPI_Cart_sub was not working properly. Kudos to Jonathan Borne for the report.
804 ----------------------------------------------------------------------------
806 SimGrid (3.24) October 9. 2019
808 The Clean Disk Release.
811 - Introduce a s4u::Disk interface to manage the newly introduced <disk>
812 tag. s4u::Disk is called to supplant s4u::Storage in a near future. It
813 thus becomes the default resource to execute I/O operations. Examples
814 and the file system plugin have been modified to use disks instead of
815 storage elements. Storage can still be used but is doomed to disappear.
816 Users are thus adviced to update their simulators accordingly.
817 - Barrier::wait returns SG_BARRIER_SERIAL_THREAD for (only) one actor
818 for consistency with pthread_barrier_wait()
819 - Host::get_englobing_zone() returns the englobing netzone
820 - Actor::on_destruction is now called in the destructor
821 Actor::on_termination new signal called when the actor terminates
823 - Global signals are now part of the Engine:
824 - on_platform_creation: after config settings, before the XML parsing
825 - on_platform_created: right after the XML parsing
826 - on_time_advance: each time the clock advances
827 - on_simulation_end: after simulation, before cleanups
828 - on_deadlock: as the name implies.
830 - sg_{actor,host,link}_{data,data_set}() now all exist.
831 Use them to attach user data to the object and retrieve it.
834 - Introduce an experimental Wifi model. It sounds reasonable
835 according to the state of the art, but it still has to be properly
836 validated, at least against ns-3 if not against reality.
837 - Improved the usability of ns-3. Several bugs were ironed out.
838 - host_energy: Wattage was expressed as 'idle:oneCore:allCores'.
839 It is now expressed as 'idle:epsilon:allCores' to properly model the
840 consumption of non-whole tasks on mono-core hosts. More info in the doc.
843 - convert a new set of functions to the S4U C interface and move the old MSG
844 versions to legacy (MSG_process_self*, MSG_process_{un}ref, ...)
847 - Fortran bindings for DVFS have been removed.
848 - Add support for MPI_Irsend, MPI_Rsend, MPI_Rsend_init, MPI_Bsend,
849 MPI_Ibsend, MPI_Bsend_init, MPI_Buffer_attach, MPI_Buffer_detach
850 - SMPI can now be selected by cmake's find_module(MPI) with
851 MPI_C_COMPILER, MPI_CXX_COMPILER, MPI_Fortran_COMPILER variables.
852 - Add support for MPI Errhandlers in Comm, File or Win. Default errhandler is now
853 MPI_ERRORS_ARE_FATAL, so codes which were sending warnings may start failing.
854 - trace-call-location can be used with TI traces, and replayed, and is compatible
855 with smpi/comp-adjustment-file.
856 - sleep events are now correctly traced/replayed.
857 - Default for trace-call-location is now to use file names and not full paths.
858 To revert to previous behavior (in case of collision of filenames), option
859 "smpi/trace-call-use-absolute-path" can be set to yes.
862 - Use the included xxHash as an hash implem when C++14 is usable.
863 - Option model-checker/hash was removed. This is always activated now.
864 - New option smpi/buffering controls the MPI buffering in MC mode.
865 - MPI calls now MC_assert() that no MPI_ERR_* code is returned.
866 This is useful to check for MPI compliance.
869 - New section on plugins: how to define a new one, and existing ones.
872 - xbt_mutex_t and xbt_cond_t are now marked as deprecated, a new C interface
873 on S4U is already available to replace them by sg_mutex_t and sg_cond_t.
876 - Introduce the <disk> tag as a replacement of the <storage>, <storage_type>,
877 and <mount> tags. The rationale is finish to decouple what should be handle
878 by SimGrid kernel (i.e., resources and activities) from plugins built in
879 user space (e.g., the file system plugin). This new tag currently accepts
880 only three attributes (id, read_bw, and write_bw). All the other information
881 that was declared with the storage related tags now has to be expressed as
882 properties. An example of platform using this new tag is available at
883 examples/platforms/hosts_with_disks.xml
886 - 'expect signal' can now accept more than one potential signal.
888 Fixed bugs (FG#.. -> framagit bugs; FG!.. -> framagit merge requests):
889 - FG#28: add sg_actor_self (and other wrappers on this_actor methods)
890 - FG#29 and FG#33: provide a new C API to mutexes and condition variables
891 - FG#30: convert MSG_process_{un}ref to sg_actor_{un}ref
892 - FG#31: per-actor data
893 - FG#34: SG_BARRIER_SERIAL_THREAD?
894 - FG#35: model-checker does not like buster-produced binaries
895 - FG!13: MC: complete workaround in the error msg seen on modern systems
896 - FG!15: execute_flops now logs compute
897 - FG!16: Fix the ns-3 bindings when several flows are simultaneously finishing
898 - FG!17: ns-3: unblock the right number of communications + others issues
899 - FG!18: Improving the performance of the ns-3 bindings
900 - GH#189: Energy consumption of parallel tasks
901 - GH#219: Error in the throughput of TCP transfer
902 - GH!330: Minor polishing of English: Configuring_Simgrid
903 - GH!331: Fix a doc error about actors (Tutorial_algorithms)
904 - GH!332: Add '-O0' flag for: cmake -DCMAKE_BUILD_TYPE=Debug
905 - GH!334: Rework energy plugin, again
907 ----------------------------------------------------------------------------
909 SimGrid (3.23.2) July 8. 2019
912 - Nicer introduction page.
913 - Migrate the "Deploy your application" page to the new doc.
914 - Move Java as a subtree of MSG.
917 - Rename simgrid::TimeoutError to simgrid::TimeoutException.
920 - Drop xbt_dynar_sort_strings().
923 - Really fix FG#26: Turning off a link should raise NetworkFailureException
924 - FG#27: Wrong exception thrown to wait_any when link is turned off
925 - GH#328: Java: Canceling multiple tasks in a single vm/host
927 ----------------------------------------------------------------------------
929 SimGrid (3.23) June 25. 2019
931 The Exotic Solstice Release.
934 - SunOS and Haiku OS support. Because exotic platforms are fun.
935 - Stop setting random seed with srand48() at initialization.
936 - Use addr2line as a fallback for stacktraces when backtrace is not available.
937 - Build option -Denable_documentation is now OFF by default.
938 - Network model 'NS3' was renamed into 'ns-3'.
941 - Simgrid can now hopefully be installed with pip.
944 - wait_any can now be used for asynchronous executions too.
947 - New log appenders: stdout and stderr. Use stdout for xbt_help.
948 - Drop xbt_dict_dump.
951 - SMPI now reports support of MPI3.1. This does not mean SMPI supports all MPI 3 calls, but it was already the case with 2.2
952 - MPI/IO is now supported over the Storage API (no files are written or read, storage is simulated). Supported calls are all synchronous ones.
953 - MPI interface is now const correct for input parameters
954 - MPI_Ireduce, MPI_Iallreduce, MPI_Iscan, MPI_Iexscan, MPI_Ireduce_scatter, MPI_Ireduce_scatter_block support
955 - Fortran bindings for async collectives.
956 - MPI_Comm_get_name, MPI_Comm_set_name, MPI_Count support.
959 - Remove option 'model-check/record': Paths are recorded in any cases now.
960 - Remove option 'model-check/sparse-checkpoint': Checkpoints are now
961 always sparse. That's an immense gain in memory, and can even be
962 faster because of cache effects. So there is no need to clutter the
963 code to allow the user to go for the unefficient mode.
966 - Remove the lagrange-based models (Reno/Reno2/Vegas). The regular
967 models proved to be more accurate than these old experiments.
969 Fixed bugs (FG=FramaGit; GH=GitHub -- Please prefer framagit for new bugs)
970 - FG#1: Broken link in error messages
971 - FG#2: missing installation documentation
972 - FG#3: missing documentation in smpirun
973 - FG#6: Python bindings not available on PyPI
974 - FG#7: simple cmake call requires doxygen
975 - FG#8: make python bindings an optional dependency
976 - FG#10: Can not use MSG_process_set_data from SMPI any more
977 - FG#11: Auto-restart actors forget their on_exit behavior
978 - FG#12: -Denable_lto=OFF doesn't disable LTO
979 - FG#13: Installs unstripped file 'bin/graphicator'
980 - FG#14: Installs the empty directory 'doc/simgrid/html'
981 - FG#15: Setting -Denable_python=OFF doesn't disable the search for pybind11
982 - FG#17: Dead link in doc (pls_ns3)
983 - FG#20: 'tesh --help' should return 0
984 - FG#21: Documentation link on http://simgrid.org/ broken
985 - FG#22: Debian installation instruction are broken
986 - FG#26: Turning off a link should raise NetworkFailureException exceptions
987 - GH#133: Java: a process can run on a VM even if its host is off
988 - GH#320: Stacktrace: Avoid the backtrace variant of Boost.Stacktrace?
989 - GH#326: Valgrind-detected error for join() when energy plugin is activated
991 ----------------------------------------------------------------------------
993 SimGrid (3.22) April 1. 2019
995 The Easter Christmas Release (this one is somewhat late).
998 - We are excited to introduce the SimGrid/S4U interface to your neighborhood
999 - Not complete yet: asynchronous activities (amongst others) are still missing
1000 - Still ongoing: the interface may change in the future. We need more
1001 testers! Please report any glitches.
1002 - No new project using Java should start now. Please switch to Python.
1005 - Some of the internal cleanups may lead to speed improvements:
1006 - The hard limitation on the amount of simulated actors with
1007 Java+Mac was removed. Now, the available memory is the only limit.
1008 - Our refcounting was tidyied, leading to 10% speedups in some cases.
1009 - We are still working on making our code robust to the actor kills
1010 and hosts' churn. Things are improving, but it's not perfect yet.
1011 - Replaced our own code to display a backtrace (that was forking addr2line)
1012 with the Boost.Stacktrace library.
1013 You won't see your backtraces without this optional dependency.
1014 - Bump cmake dependency to 3.5 (provided by Ubuntu 16.04).
1015 - Stop setting random seed with srand() at initialization.
1018 - In <host> and <peer>, 'availability_file' is now 'speed_file'.
1019 XML file version remains 4.2 since old files are still compatible.
1022 - Process termination which was broken at version 3.21 has been repaired.
1023 - Expose host load plugin: loadInit, getCurrentLoad, getComputedFlops, getAvgLoad
1024 - Hide the examples into examples/deprecated. New users should use Python.
1027 - Drop MSG_process_create_from_stdfunc() from the API.
1028 This C++ function was a pimple in the C API, made necessary at some
1029 point by the Java bindings. This is fixed now.
1030 - Hide the examples into examples/deprecated. New users should use S4U.
1031 - MSG_process_create and MSG_process_attach now crash if the host used
1032 to run this process is off.
1033 - Fix the protype of MSG_process_on_exit()
1034 Now use (int,void*) callbacks instead of (void*,void*) ones.
1035 The implementation was ways too messy to actually work, I guess.
1038 - Change the way SMPI_SAMPLE_* macros work to avoid invalidating cache
1039 too often and provide more accurate timings.
1040 - Add -gdb, -lldb, and -vgdb shortcuts to help debug MPI codes with smpirun
1041 - MPI_Alltoallw support
1042 - Partial MPI nonblocking collectives implementation: MPI_Ibcast, MPI_Ibarrier,
1043 MPI_Iallgather, MPI_Iallgatherv, MPI_Ialltoall, MPI_Ialltoallv, MPI_Igather,
1044 MPI_Igatherv, MPI_Iscatter, MPI_Iscatterv, MPI_Ialltoallw.
1045 - MPI_Request_get_status, MPI_Status_set_cancelled, MPI_Status_set_elements
1047 - Basic implementation of generalized requests (SMPI doesn't
1048 allow MPI_THREAD_MULTIPLE) : MPI_Grequest_complete, MPI_Grequest_start
1051 - Drop sg_cmdline. Please use xbt_cmdline instead.
1052 - Drop the C xbt_os_mutex_t; Use the C++11 std::mutex.
1053 - Drop the C xbt_os_sem_t; Use the C++ xbt::OsSemaphore.
1054 OsSemaphore is implemented in a portable way with C++11 threads.
1055 This should allow much more threads to be created at the same time,
1056 allowing Mac and Java users to simulate many more actors.
1057 - Implement the 'thread' factory with std::thread instead of xbt ones.
1058 It is not possible to set the stack size with threads anymore, but
1059 -fsplit-stack is the way to go nowadays when using threads.
1060 - Drop the xbt_os_thread_t module (now unused)
1061 - Drop xbt_ex_display(), use simgrid::xbt::log_exception() instead.
1062 - Drop xbt_str_join_array().
1063 - Drop cunit, use Catch2 instead.
1066 - Many cleanups in the kernel::activity namespace. This was long
1067 overdue, and shall open the path to many future endeavors.
1070 - #132: Java: a process can not shut down its own host
1071 - #220: S4U: detached send causes exception if sender terminates soon after sending
1072 - #261: Document the parameters of parallel execution's constructor
1073 - #300: [s4u] BarrierPtr is missing
1074 - #314: SMPI args internal cleanup
1075 - #316: Fix a bug related to the CPU utilization of multi-core VM
1076 - #318: Invalid trace file when using option --cfg=tracing/smpi/display-sizes:yes
1077 - #324: S4U: Attempting to create an actor on turned off host segfaults instead of throwing
1078 - #325: Turning off a host has different behavior on sleeping actors and computing actors
1080 ----------------------------------------------------------------------------
1082 SimGrid (3.21) October 3. 2018
1084 The Restarting Documentation (TRD) Release.
1087 - Convert the user manual to Sphinx for improved usability.
1088 Unstable version now hosted on https://simgrid.frama.io/simgrid
1089 Many glitches remain; stay tuned.
1090 - Restrict the Doxygen reference API to the installed header files.
1091 (documenting all internals this way is overkill + doxygen scales badly)
1092 - New tutorial on S4U (highly inspired from the old MSG one, but with
1093 a git repository to fork as a starting point, and a docker image)
1094 - Started but not finished an SMPI tutorial inspired from the JLPC'14 one.
1095 - The Developper manual is still to be converted (not compiled until then)
1096 - Some parts are still missing in this conversion (such as the
1097 platform and deployment sections) while others were blindly converted
1098 and would need more love (such as the configuration flags).
1099 Things will certainly further improve in the future releases.
1102 - Fully reimplement auto_restart mechanism that was utterly broken
1103 (fix #22, #131 and #281 that were all very related)
1104 - Implement semaphores (fix #303 and #291)
1105 - When creating an actor from a function and its parameters,
1106 move-only parameters are not allowed anymore, as it would prevent
1107 the actor to be restartable if its parameters are consumed on run.
1108 - s4u::Io: IOs go asynchronous as activities. New methods in s4u::Storage:
1109 - io_init(sg_size_t, s4u::Io::OpType) to create a READ or WRITE asynchronous
1110 IO operations that can be started, waited for, or canceled as a regular
1112 - read_async(sg_size_t) and write_async(sg_size_t) which are wrappers on
1116 - Rename 'power' and 'power_used' variables into 'speed' and 'speed_used'
1117 - New host variable: 'core_count'
1120 - Remove xbt_os_thread_specific features
1121 - Remove portability wrapper to condition variables
1122 - Remove xbt_os_thread_yield()
1125 - MPICH collective selector now mimics MPICH 3.3b
1126 - OpenMPI collective selector now mimics OpenMPI 3.1.2 (default "tuned" setting)
1127 - MPI_Init(NULL,NULL) is now allowed
1128 - smpi/wtime option now injects time in gettimeofday or clock_gettime calls
1129 - Command-line arguments should now be handled properly in Fortran simulations
1130 - MPI Attributes and related callbacks should work in Fortran
1131 - Apps using C + Fortran should now work
1132 - MPI_* calls now check for non MPI_SUCCESS return values and emit warnings
1133 - Support MPI_Error_String
1136 - Due to an internal bug, Msg.run() must now be your last line.
1137 We hope to fix it in a future release, and we are sorry for the inconvenience.
1140 - #22: Process autorestart seem to only work with CAS01 cpus
1141 - #56: Feature request: dynamic SMPI replay
1142 - #93: simgrid should not eat --help
1143 - #111: How to change the loopback link characteristics?
1144 - #116: Platform cluster radical
1145 - #117: Platform cluster/host order
1146 - #129: Replay_multiple on steroid
1147 - #131: Java : autostart does not work
1148 - #143: Setting a breakpoint at a given time
1149 - #235: Network energy models should be integrated
1150 - #264: Add ptask L07 resource tracing
1151 - #271: Dynamic and manual replay of SMPI traces
1152 - #279: Breakpoints option uses time deltas instead of absolute time
1153 - #281: Daemonized actor no longer daemonized after an auto-restart
1154 - #282: TIT convertor erase traces when using absolute path in the trace list file
1155 - #285: segfault when a s4u actor kills itself with msg process tracing activated
1156 - #286: Pajé traces are not exposing the number of cores
1157 - #287: Command-line parsing should stop when encountering '--'
1158 - #288: MPI_Init(NULL, NULL)
1159 - #289: Improve documentation of Actor::on_destruction and this_actor::on_exit()
1160 - #290: Method to check if a mailbox has a message ready to be consumed
1161 - #291: [s4u] semaphores do not seem available yet
1162 - #294: Alltoall collective implementation of mpich
1163 - #295: Starting a Host as OFF is not supported
1164 - #296: DTD too permissive
1165 - #299: Add a s4u barrier example
1167 ----------------------------------------------------------------------------
1169 SimGrid (3.20) Released June 24. 2018
1171 The proxy snake_case() release.
1174 - The whole API is now using snake_case() instead of mixing it with camelCase.
1175 Compatibility wrappers in place for one year.
1176 - We took the opportunity to increase the consistency of the API.
1177 Please report any remaining glitches.
1178 - New function simgrid::s4u::Host::get_actor_count:
1179 Returns the number of actors running on a specific host.
1182 - SMPI is now tested with ~45 proxy apps from various sources, with none or
1183 only minor patching needed: check https://github.com/simgrid/SMPI-proxy-apps
1184 - Replay: The replay file has been re-written in C++.
1185 - Replay: Tags used for messages sent via MPI_Send / MPI_Recv are now
1186 supported. They are stored in the trace and used when replayed.
1187 - Basic support of MPI_Cancel. Robustness not guaranteed.
1188 - Support of MPI_Win_allocate_shared, MPI_Win_shared_query, MPI_Comm_split_type
1189 (only for MPI_COMM_TYPE_SHARED).
1190 - New option: smpi/privatize-libs, to add external shared libs to be privatized
1191 by SMPI. They will be copied locally and loaded separately by each process.
1192 Example --cfg=smpi/privatize-libs:"libgfortran.so.3;libscalapack.so".
1193 - Tracing: add tracing for MPI_Start, Startall, Testall, Testany
1194 - Interception of getopt, getopt_long and getopt_long_only calls to avoid issues
1195 with internal index optind with multiple processes. Only works if MPI_Init has
1196 already been called.
1197 - Fortran: SMPI builds a mpi.mod file which should allow use of "use mpi"
1198 syntax without preprocessing tricks.
1201 - Change --cfg=tracing/msg/vm to --cfg=tracing/vm as virtual machine
1202 behavior tracing is no longer limited to MSG
1203 - TIT (Time Independent Traces): We finally support tags. Unfortunately,
1204 this means that traces now need to be updated or re-obtained; both Irecv
1205 and Isend lines in your traces have now in total 5 mandatory fields:
1206 <rankid> <command> <to/from rankid> <tag> <size>
1207 To update your traces, it suffices to add a 0 for the tag here.
1208 - TIT now also supports waiting for a distinct request via MPI_Wait.
1209 Wait/Test now wait for a specific request, not just the last one that was
1210 issued. This unfortunately means another update, because we need to
1211 identify which request you want to wait for. We do this via the
1212 triplet (sender, receiver, tag), which needs to be added:
1213 <rankid> <command> <sender> <receiver> <tag>
1214 - Actions are now in lower case (e.g., "allReduce" becomes "allreduce").
1215 New script simgrid_convert_TI_traces.py: upgrade your TI traces.
1218 - The deprecation of MSG is ongoing (but this should not impact you).
1219 Many MSG functions are now simple wrappers on the C API of S4U. If
1220 you wish to convert your code to S4U, find the S4U counterparts of
1221 your MSG calls in src/msg/msg_legacy.cpp.
1222 - MSG can still be used, but won't evolve anymore.
1225 - Allow to run the Link energy plugin from the command line with
1226 --cfg=plugin:link_energy
1227 - Rename Energy plugin into host_energy
1228 - Rename Load plugin into host_load
1231 - Add parameter --cfg=simix/breakpoint to raise a SIGTRAP at given time.
1232 - kill simix::onDeadlock() that was somewhat dupplicating s4u::on_deadlock()
1233 - Improve performance when handling timeouts of simix synchros.
1236 - Config: the C API is now deprecated (will be removed in 3.23), and
1237 the C++ API has been slightly improved.
1240 - Fix several build issues on OSX.
1241 - Move simgrid_config.h to simgrid/config.h (old header still working)
1244 - #143: Setting a breakpoint at a given time
1245 - #150: Inconsistent event names in SMPI replay
1246 - #258: daemonized actors hang after all non-daemonized actors have completed
1247 - #267: Linker error on unit_tmgr
1248 - #269: SMPI: tracing of MPI_Wait/all/any broken
1249 - SMPI: Fix various crashes with combined use of MPI_PROC_NULL and MPI_IGNORE_STATUS
1251 ----------------------------------------------------------------------------
1253 SimGrid (3.19.1) Released March 22 2018
1255 The Fixed ABI Release.
1257 As you may know, we are currently refactoring SimGrid in deep.
1258 Upcoming SimGrid4 will be really different from SimGrid3: modular,
1259 standard and extensible vs. layered, homegrown and rigid. C++ vs. C.
1261 Our goal is to smooth this transition, with backward compatibility
1262 and automatic update paths, while still progressing toward SimGrid4.
1264 SimGrid remains open during works: The last pure SimGrid3 release was
1265 v3.12 while all subsequent versions are usable alpha versions of
1266 SimGrid4: Existing interfaces remain unchanged, but the new S4U
1267 interface is budding and the internals are deeply reorganized.
1269 Since 2015, we work hard to reduce the changes to public APIs. When
1270 we need to rename a public library symbol in S4U, we let your
1271 compiler issue an explicative warning when you use the deprecated
1272 function. These messages remain for four releases, i.e. for one full
1273 year, before turning into an error. Starting with v3.15, your can
1274 also adapt to API changes with the SIMGRID_VERSION macro, that is
1275 defined to 31500 for v3.15, to 31901 for v3.19.1 and so on.
1277 Starting with this v3.19.1, our commitment to reduce the changes to
1278 the public interfaces is extended from the API to the ABI: a program
1279 using only MSG or SimDag and compiled against a given version of
1280 simgrid can probably be used with a later version of SimGrid without
1281 recompilation. We will do our best... but don't expect too much of
1282 it, that's a really difficult goal during such profund refactoring.
1284 The difference between v3.19 and v3.19.1 is that the former was
1285 accidentally breaking the ABI of MSG, while the later is restoring
1288 S4U and kernel APIs will still evolve until SimGrid4, with one-year
1289 deprecation warnings as currently. In fact, cleaning up these
1290 interfaces and converting them to snake_case() is one release goal of
1291 v3.20. But don't worry, we are working to smooth this upgrade path.
1293 In summary, new projects should start with S4U to benefit of the
1294 future, but old MSG projects should still be usable with no change.
1296 ----------------------------------------------------------------------------
1298 SimGrid (3.19) Released March 20 2018
1300 The Moscovitly-cold Spring release.
1302 SMPI user-visible improvements:
1303 - Support of MPI_Type_create_subarray
1304 - Unimplemented MPI calls now abort (instead of issuing a warning)
1305 Some harmless calls around errhandlers still only issue a warning.
1306 - MPI_Sendrecv was behaving badly when MPI_PROC_NULL was sender or receiver.
1307 - Starting MPI ranks (or even MSG/S4U actors) once the simulation started
1308 is now possible (mmap privatization was refactored to this end).
1309 Adding new SMPI instances should also be technically doable now.
1311 SMPI internal cleanups:
1312 - Removed index notion from SMPI -- no more "getPid() - 1"!
1313 In tracing files, actors are called rank-<PROCESS-ID> but these are
1314 NOT the real ranks (tracing several communicators is not supported yet).
1315 - Deprecate smpi_process_index() (will be removed in 3.22)
1316 - Better testing on classical proxy apps, through an external project:
1317 https://github.com/simgrid/SMPI-proxy-apps/
1320 - Use a graphical TOC to make it easier to find the documentation you need
1321 - Revamp the MSG tutorial
1324 - Fix MSG_task_get_remaining_work_ratio(): return 1.0 for unstarted tasks.
1325 - Remove parameter of MSG_process_killall().
1326 Resetting the PID was bogus anyway (several actors could have the same PID).
1329 - Execution->setHost() can be called after start(), to migrate it.
1330 - Comm::test_any() is now implemented.
1331 - s4u::Actor now has onCreation() and onDestruction() signals.
1332 - Install some kernel header files for the users' plugins and more.
1333 Warning, their API is really not stable yet.
1334 include/simgrid/kernel/resource/{Action,Resource,Model}.hpp
1335 include/simgrid/kernel/routing/*Zone.hpp
1338 - SD_task_dependency_add(): remove unused parameters 'name' and 'data'.
1340 Build System and other cleanups:
1341 - Remove unused run-time parameter "tracing/onelink-only".
1342 - SimGrid now works with intel compilers (MC still buggy)
1343 - Remove XBT_LOG_CONNECT, it should be useless nowadays.
1344 - tesh kills subprocesses on timeout (but not on windows)
1347 - Rename FULLDUPLEX into SPLITDUPLEX (old name still accepted)
1350 - #194: Feature request: simgrid::s4u::Comm::test_any()
1351 - #245: migrating an actor does not migrate its execution
1352 - #253: Feature Request: expose clusters as objects
1353 - #254: Something seems wrong with s4u::Actor::kill(aid_t)
1354 - #255: Tesh broken on Windows
1355 - #256: Modernize FindSimGrid.cmake
1356 - #257: Fix (ab)use of CMake install
1358 ----------------------------------------------------------------------------
1360 SimGrid (3.18) Released December 24 2017
1362 The "Ho Ho Ho! SimGrid 4 beta is coming to town" release.
1364 MSG IS NOW DEPRECATED. Please use S4U for new projects.
1365 - Support for MSG should not be removed from SimGrid before 2020,
1366 but future evolutions will be limited to the integration of
1367 user-provided patches.
1370 - s4u::onDeadlock() signal, run before stopping the simulation.
1371 - s4u::Exec: asynchronous executions (abstraction of background
1373 - s4u::Host->getLoad() returns the achieved speed in flops/s
1376 - Link::name() is deprecated and will be removed in v3.21, use
1377 Link::getCname() instead.
1378 - Mailbox::getName() changed to return a std::string, use
1379 Mailbox::getCname() instead to get a char*.
1380 - Storage::getName() changed to return a std::string, use
1381 Storage::getCname() instead to get a char*.
1382 - s4u::allStorages() becomes s4u::getStorageList(whereTo)
1383 to have both allocation and deallocation of the map in user space.
1386 - Forbid the use of MSG_task_get_flops_amount() on parallel tasks:
1387 The amount of flops remaining to do is a vector, not a scalar.
1388 - Introduce MSG_task_get_remaining_work_ratio(), which does what its
1389 name implies on both sequential and parallel tasks.
1390 - Both changes fix GitHub's #223 using PR #237 as a basis.
1391 Thanks Michael Mercier.
1392 - Most examples were converted to S4U and hidden elsewhere at tests.
1393 Rationale: we still want MSG to work; we want newcomers to use S4U.
1396 - LMM stuff moved to its own namespace: simgrid::kernel::lmm.
1397 - Renamed LMM classes (e.g. s_lmm_system_t -> System).
1400 - Switch to the faster dlopen privatization mechanism by default
1401 - Documentation improvments
1404 - Live migration is getting moved to a plugin. Dirty page tracking is
1405 the first part of this plugin. This imply that VM migration is now
1406 only possible if one this function is called:
1407 - C/MSG: MSG_vm_live_migration_plugin_init()
1408 - C/C++: sg_vm_live_migration_plugin_init()
1409 - Java: Msg.liveMigrationInit()
1410 For C and C++, "simgrid/plugins/live_migration.h" also has to be
1414 - Define class simgrid::xbt::Path to manage file names.
1415 - Removed unused functions:
1416 - xbt/file.h: xbt_basename(), xbt_dirname(), xbt_getline()
1417 - xbt/graph.h: xbt_graph_edge_get_length(), xbt_graph_edge_set_length,
1418 xbt_graph_export_graphviz()
1419 - xbt/str.h: xbt_str_join()
1420 - Remove unused datatypes:
1421 - xbt/heap.h: use std::priority_queue or boost::heap instead
1422 - xbt/swag.h: use boost::intrusive::list instead
1425 - New link_energy plugin for the consumption of the links.
1426 - All of the operations on files and storage contents have been
1427 packaged into a plugin (src/plugins/file_system). The current
1428 public interface can be found in
1429 include/simgrid/plugins/file_system.h
1430 To use these functions you now have to initialize the plugin by
1431 calling MSG_storage_file_system_init() just after calling
1432 MSG_init() or sg_storage_file_system_init() just after creating
1436 - Remove the undocumented/untested tag <include>
1439 - Remove viva specific tracing as the tool is no longer maintained
1442 - #248: Kill of finished processes leads to segfault
1443 - #240: xbt_cond_wait_timeout should gracefully return for C apps
1444 - #239: please implement signal s4u::onDeadlock()
1445 - #230: segfaults when exit() without run()
1446 - #225: s4u::Actor::kill() doesn not really kill victims in a join()
1447 - #223: MSG_task_get_flops_amount() not working with parallel tasks
1448 - #222: Actor::kill() doesn't really kill and segfaults
1449 - #221: odd LMM warning when killing an actor
1450 - #120: Memory leak when the processes are forcefully killed
1452 ----------------------------------------------------------------------------
1454 SimGrid (3.17) Released October 8 2017
1456 The Drained Leaks release: (almost) no known leaks despite the tests.
1458 Even very long simulations will preserve your memory: our testsuite
1459 stresses SimGrid for over 45mn on fast machines for a coverage of
1460 over 80%, and there is only one single known leak, of about 4kb.
1464 - Comm.detach(): start and forget about asynchronous emission. A cleanup
1465 handler may be given to free resources if the comm cannot be completed.
1466 - this_actor::send(mailbox) is now mailbox->put()
1467 - New: simgrid::s4u::Comm::wait_all()
1468 - New: Host.execute() for remote executions.
1471 - Unused option network/sender-gap is removed.
1474 - Deprecate MSG_task_isend_with_matching(): This unused feature
1475 really complicates our internals. Will be removed in v3.20.
1478 - Improved context termination. It is now possible to free resources, even
1479 when a process is forcibly killed.
1480 - ContextBoost: add support for Boost versions above 1.61.
1483 - Bring back run-time option --cfg=exception/cutpath to remove exception
1485 - Removed unused functions:
1486 - xbt/str.h: xbt_str_split_str(), xbt_str_subst(), xbt_str_ltrim(),
1487 xbt_str_rtrim(), xbt_str_trim().
1488 - xbt/xbt_os_thread.h: xbt_os_thread_cancel(), xbt_os_thread_detach().
1491 - Removed header files obsolete since SimGrid 3.12:
1492 msg/datatypes.h, msg/msg.h, simdag/datatypes.h, simdag/simdag.h.
1494 - #3: SD_exit should be made optional
1495 - #120: Memory leak when the processes are forcefully killed
1496 - #159: Threading test regression in Actor refcounting
1497 - #170: simgrid::s4u::Comm::wait_any() returns too many comms
1498 - #185: simgrid::s4u::Engine::instance()->shutdown() segfaults
1499 - #186: Actor::killAll() segfaults if some process is blocked on wait()
1500 - #191: VM migration and pstate
1501 - #192: Updating the energy consumptions of all hosts crashes with VMs
1502 - #195: All actors have PID=0 in the logs
1503 - #204: Sometimes segfault with thread contexts and mmap privatization
1504 - #222: Actor::kill() doesn't really kill and segfaults
1505 - #225: Actor::kill() doesn't really kill when victims are doing a join()
1507 ----------------------------------------------------------------------------
1509 SimGrid (3.16) Released June 22. 2017.
1511 The Blooming Spring Release: developments are budding.
1514 - FreeBSD: Disable SMPI mmap privatization, switch automatically to dlopen.
1515 - Mac, BSD: dlopen+thread broken, switch automatically to raw contexts.
1516 - Java JAR file should be finally fully working on Mac OSX too.
1518 XML platforms: Switch to platform v4.1 format.
1519 * This is (mainly) a backward compatible change: v4 are valid v4.1 files
1520 - <zone> can be used as a synonym for the now deprecated <as>
1521 - <zoneRoute> can be used as a synonym for the now deprecated <asroute>
1522 - <bypassZoneRoute> can be used as a synonym for the now deprecated <bypassAsRoute>
1523 - <actor> can be used as a synonym for the now deprecated <process>
1524 - state_file and avail_file periodicity is now easier to express
1525 (check the documentation) the old behavior should still work.
1526 * Storage: not backward compatible, but it seems that nobody ever used it
1527 - Remove attribute 'content_type' of <storage_type>: was never used
1528 - Make attribute 'model' of <storage_type> optional: for future usage
1529 - Remove Bconnection model property: was never (in)validated. Replaced by
1530 the maximum of the read and write bandwidth as a resource constraint.
1533 - New and Backwards Compatibility break:
1534 SD_simulate_with_update (double how_long, xbt_dynar_t changed_tasks_dynar)
1535 When one wants to get the list of tasks whose states have changed during a
1536 simulation round, s/he has to allocate and free a dynar and use it as
1537 argument to this function. The former SD_simulate (double how_long)
1541 - Allow multicore VMs, with the correct sharing (unless you overcommit)
1542 BUG: vCPU overcommitting still leads to buggy sharing, though. WIP.
1545 - New function to update the consumption of all hosts at once.
1546 - Fix the model for multi-core hosts, linear in the amount of busy
1547 cores with an abnormality for pIdle (see paper).
1548 BUG: Still not satisfactory for ptask on mono-cores.
1551 - The netzone are now available from the MSG API.
1552 The old names still work, but are now deprecated.
1555 - New algorithm to privatize globals: dlopen, with dynamic loading tricks
1556 - New option: smpi/keep-temps to not cleanup temp files
1557 - New option: smpi/shared-malloc-blocksize . Relevant only when global shared
1558 mallocs mode is used, allows to change the size of the fake file used
1559 (default 1MB), to potentially limit the number of mappings for large runs.
1560 - Support for sparse privatized malloc with SMPI_PARTIAL_SHARED_MALLOC()
1561 - Fortran ifort and flang compilers support
1562 - New RMA calls supported (experimental):
1563 - MPI_Win_allocate, MPI_Win_create_dynamic, MPI_Win_attach
1564 - MPI_Win_detach, MPI_Win_set_info, MPI_Win_get_info
1565 - MPI_Win_lock_all, MPI_Win_unlock_all, MPI_Win_flush
1566 - MPI_Win_flush_local, MPI_Win_flush_all, MPI_Win_flush_local_all
1567 - MPI_Op_commutative, MPI_Fetch_and_Op, MPI_Compare_and_swap
1568 - MPI_Rput, MPI_Rget, MPI_Raccumulate, MPI_Rget_accumulate
1571 - New: this_actor::isMaestro() returns whether we are in kernel mode.
1572 - Behind the scene, ActivityImpl are now automatically refcounted.
1573 Removing this nasty bottleneck will greatly simplify our internals.
1576 - Replay: New function xbt_replay_action_get():
1577 Retrieve the function previously associated to an event type.
1578 - DROPPED FUNCTION: xbt_str_varsubst()
1579 - DROPPED MODULE: strbuff. We don't need it anymore.
1580 - DROPPED MODULE: matrix. We don't need it anymore.
1581 - DROPPED MODULE: lib. We don't need it anymore.
1583 -- Thu Jun 22 22:48:12 CEST 2017 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
1585 SimGrid (3.15) Released March 22. 2017
1587 The Spring Release: continuous integration servers become green
1588 We fixed even the transient bugs on all target architectures:
1589 Linux (CentOS, Debian, Ubuntu, Fedora), Mac OSX (Mavericks, El Capitan)
1590 Windows, FreeBSD, NetBSD.
1592 - Rename NetCards to NetPoints.
1593 This was intended to help NS3 users, but that's not a netcard.
1594 That's a point in the routing algorithm, let's avoid wrong simplifications.
1597 - New: MSG_process_yield(). Stop and yield to other processes.
1598 - New: MSG_process_daemon(). Daemon processes are automatically killed
1599 when the last non-daemon process terminates
1600 - New: MSG_process_ref/unref(). Fiddle with the process refcounting.
1601 - Renamed MSG_energy_plugin_init() -> MSG_host_energy_plugin_init()
1602 to make room for the upcoming network energy plugin.
1603 - Drop MSG_host_get_current_power_peak: duplicates MSG_host_get_speed
1606 - Ensure that an actor can kill itself with Process::exit()
1607 - Kill the obscure NativeException. Nobody want to survive the issues
1608 it denotes, so use JniException that is a RuntimeException (not to
1609 be caught explicitly).
1610 - Partial bug fix in initialization. SimGrid flags on command line were
1611 consumed at C level but stayed in the original Java String[] args.
1612 This could mess users' args[i] if SG flags were not put at the end of
1614 The SimGrid flags are now removed from the Java arguments. However,
1615 the number of arguments REMAINS UNCHANGED. It is then UNSAFE to test
1616 if args.length is greater than the number of YOUR OWN ARGUMENTS.
1617 It might be if you have --log or --cfg flags in the command line.
1618 - Fix numerous memleaks all around the place. In particular, around VMs.
1622 - s4u::onPlatformCreated: right before the simulation starts
1623 - s4u::onSimulationEnd: right after the main simulation loop
1624 - s4u::onTimeAdvance: right after a clock change (time is discrete)
1625 - s4u::Host::onSpeedChange: when the pstate is changed, or when an
1626 event from the availability_file changes the avail speed.
1627 - Links are now usable from s4u
1628 - New: Engine::hostList() and Engine::hostCount(). Still clumsy.
1629 - New: Actor::suspend(), Actor::resume(), and Actor::migrate(new_host)
1630 - New examples: The conversion of MSG examples to S4U has begun
1631 - Actors: create, kill, migration, and suspend
1632 - Applications: master-worker and token-ring
1633 - Action replay: communications and storage
1634 - Drop Host::getPstateSpeedCurrent() which duplicates Host::speed()
1637 - Backwards Compatibility breaks
1638 - The SD_route_get_list and SD_route_get_size functions have been removed.
1639 They are replaced by the unique
1640 void sg_host_route(sg_host_t src, sg_host_t dst, xbt_dynar_t links)
1641 The route from src to dst is built in the links dynar whose size can
1642 be obtained with xbt_dynar_length.
1643 - The SD_route_bandwidth and SD_route_latency functions have been replaced by
1644 sg_host_route_bandwidth and sg_host_route_latency.
1645 Macros ensure the backwards compatibility, but you should fix your code
1648 - Major C++ rewrite ongoing (SMPI used to be C compiled in C++).
1649 This can break codes using SMPI internals (from private.h instead of the public smpi.h).
1650 - Bump our claim of support from MPI 1.1 to MPI 2.2.
1651 We don't support 100% of it, but it should be enough. Contact us if not.
1652 - MPI_Win_lock/unlock, MPI_Get_accumulate support added (as for all RMA, implementation is
1653 naive and probably inaccurate)
1654 - New algorithm for SMPI_SHARED_MALLOC: global, where all blocks are
1655 mapped onto a unique small file using some system magic.
1656 - Bugfix: smpirun was sometimes misusing hostfile when wrongly terminated
1657 - Fortran: cleanups, fixes, support of user-added operations
1658 - RMA: MPI_Accumulate are applied in correct order.
1659 - RMA: MPI_Win_{complete/post} shouldn't miss messages anymore.
1660 - Better support for MPI_IN_PLACE
1661 - Support for MPI_Win attrs and keyvals.
1662 - Support MPI_Comm_group_create, MPI_Type_size_x
1663 - MPI ops should be properly applied to all allowed types
1664 - Replace implementation of MPI_Bcast "scatter followed by rdb allgather"
1665 algorithm by a non failing one from mpich.
1668 - Kill the fifo data container: we don't use it anymore.
1671 - A <cluster> can now be created with different speed values to represent pstates.
1672 see examples/platforms/energy_cluster.xml for an example.
1674 SimGrid (3.14.159) Released December 28. 2016
1676 The previous release was only a crude approximation of a Pi release;
1677 this one should be a bit better.
1679 - Revert a last minute change that broke on Mac OSX.
1680 - Fix the changelog and NEWS files.
1681 - Improve the documentation, in particular of the routing module.
1682 - Integrate some patches flying around in Debian.
1684 SimGrid (3.14) Released December 24. 2016
1687 * The whole documentation was reworked and reorganized. There is
1688 still much room for improvement here, but we're on it.
1691 * We now need python3 for our testing infrastructure.
1692 * Model checking needs libevent
1695 * Now works on FreeBSD
1698 * Privatization now works on FreeBSD
1700 * Privatization is now activated by default in smpirun
1701 You can turn it off with -no-privatize if something goes wrong.
1703 * Call-location tracing for SMPI.
1704 You can add the exact location (filename / linenumber) of an MPI call to
1705 your trace files and slow down or speed up the simulation between two
1706 consecutive calls by using an adjustment file (see the documentation).
1708 * Fixed computation of timings for MPI_Send, MPI_Recv & possibly also others
1709 We've found a bug that prevented SMPI to account for MPI_Send, MPI_Recv
1710 and others (in some cases) in a correct way. That is, the smpi/os, smpi/or
1711 values were ignored in some cases. The timings of these functions can now
1712 be significantly different.
1714 * smpi/cpu-threshold:-1 should become smpi/simulate-computation:no
1715 smpi/running-power is renamed to smpi/host-speed
1717 * smpi/grow-injected-times option to enable or disable multiplication of the
1718 timings injected in MPI_Iprobe, or MPI_Test. Enabled by default, which can
1719 make simulation less precise (but also much faster).
1721 * smpirun script should be (much) faster for large deployments.
1723 * SMPI tracing: fixed issue with poor matching of send/receives.
1725 * Replay: Fix broken waitall
1727 New functions and features
1728 * MSG_parallel_task_execute_with_timeout, to timeout computations.
1730 Dropped / renamed functions and features
1731 * msg_mailbox_t and associated functions. Use s4u::Mailbox instead.
1732 - MSG_mailbox_is_empty() -> Mailbox::empty()
1733 - MSG_mailbox_front() -> Mailbox::front()
1734 - MSG_mailbox_get_by_alias() -> simgrid::s4u::Mailbox::byName(name)
1735 - MSG_mailbox_get_task_ext() -> MSG_task_receive_ext()
1736 - MSG_mailbox_get_task_ext_bounded -> MSG_task_receive_ext_bounded
1737 - MSG_host_(get/set)_params -> MSG_vm_(get/set)_params
1738 * Don't pass the free_f parameter to property related functions:
1739 - MSG_host_set_property_value()
1740 - MSG_as_router_set_property_value()
1741 - MSG_storage_set_property_value()
1742 * VM properties. Since msg_vm_t are msg_host_t, just use
1743 MSG_host_get_property_value() and friends
1744 * VM I/O related things:
1745 - Ignored parameter of vm_create: core_nb, disk_path and disk_size.
1746 - Unimplemented save/restore methods
1747 * MSG_as_router_get_property_value() was redundant with
1748 MSG_environment_as_get_property_value().
1749 - Removed MSG_as_router_*propert*() functions
1750 - Added MSG_environment_as_set_property_value() for consistency
1751 * xbt heterogeneous dictionaries (created with xbt_dict_new()).
1752 Well, they are still there for now, but deprecated with a warning.
1753 Please switch to xbt_dict_new_homogeneous() before this is removed
1755 * Task affinity. Its intended behavior (that was very badly tested
1756 and probably not really working) was deceiving what most users
1757 would have hoped here.
1758 * xbt_os_sem_get_value: unused internally, deprecated on OS X El Capitan
1759 * Option network/coordinates is now useless and should be dropped.
1762 * Added option storage/max_file_descriptors to allow more than 1024 files opened
1765 * Added option maxmin/concurrency_limit to allow more than 100 processes per host
1766 * Added Dragonfly topology support
1769 * Add Exa- and Peta- units such as EiB, EB, Eib, Eb for size, and
1770 EiBps, EBps, Eibps, Ebps for bandwidth.
1771 They may become useful to some lucky ones.
1774 * New functions: msg.Comm.waitAll() and msg.Comm.waitAny()
1775 * ex/app_tokenring: new example, very similar to the MSG Token Ring
1776 * ex/async_waitAll: new example, on asynchronous communications
1779 * Memory usage should be decreased for simulations with a large number
1780 of processes. This also helps for SMPI.
1782 SimGrid (3.13) stable; urgency=low
1784 The Half Release, a.k.a. the Zealous Easter Trim.
1786 - We removed half of the lines, that were mostly experimental cruft.
1787 v3.12 lasted 286000 lines of code, v3.13 is only 142000 lines
1788 (not counting blanks and comments -- according to openhub.net)
1789 - The internals are now compiled in C++ (and will soon be clean C++)
1790 - We removed 75 klines of XML, 12 klines of Java, 5 klines of cmake,
1791 59 klines of C, etc. We added only 29 klines of C++ in replacement.
1793 * Backwards Compatibility breaks
1794 - Removed Lua simulation bindings (switch to C or Java for that).
1795 Lua can still be used to describe platforms
1796 - Removed Java kernel plug-ins.
1797 Will be reintroduced after the ongoing major internals reorg.
1799 - the following functions were removed.
1800 They were too specific and should be reimplemented in a generic
1801 way, with filter function.
1802 - MSG_task_listen_from_host
1803 - MSG_mailbox_get_count_host_waiting_tasks
1804 - MSG_mailbox_put_with_timeout was removed.
1805 Please use MSG_task_send_with_timeout instead.
1807 - the SD_application_reinit function was removed. It has been a noop for a while.
1808 - The ACCESS_MODE of SD_workstation has been removed. This feature was not really usable and should soon be
1809 replaced by a more flexible mechanism.
1810 - The following functions thus do not exist anymore
1811 - SD_workstation_get_access_mode
1812 - SD_workstation_set_access_mode
1813 - SD_workstation_get_current_task
1814 - Basic estimation functions have been removed but can easily be replaced
1815 - SD_route_get_communication_time => SG_route_get_latency() + amount / SD_route_get_bandwidth()
1816 - SD_workstation_get_computation_time => amount / sg_host_speed()
1818 - VM.setBound(int load) is now VM.setBound(double bound) to meet the MSG semantics.
1819 Use VM.getSpeed()*load/100 for the legacy behavior.
1821 - option enable_tracing was removed. It was not doing anything for a while.
1822 - In the ModelChecker:
1823 - the model-checker now ptraces the model-checked process which means
1824 you cannot use a debugger on the latter anymore (we might make this
1825 optional in the feature);
1826 - removed soft-dirty page tracking;
1827 - remove model-checked side snapshot management,
1828 MC_snapshot() and MC_compare_snapshot();
1829 - keep the MC_cut() function as a stub (it was not really working
1830 in the previous release).
1833 * All options are consistently in kebab-case. Old names are kept as alias.
1836 * Switch to platform v4 format.
1837 - Rename from 'power' to 'speed' the attributes describing the amount of
1838 flops that a <host>, <peer>, <cluster> or <cabinet> can deliver per second.
1839 - In <trace_connect>, attribute kind="POWER" is now kind="SPEED".
1840 - In <host> and <link>, attributes availability and state are gone.
1841 It was redundant with state and availability traces, and with peak values.
1842 - In <cluster>, attributes availability_file and state_file are gone.
1843 It was too complex and unused.
1844 - Kill <gpu>. Was not doing anything.
1845 - The DOCTYPE points to the right URL:
1846 http://simgrid.gforge.inria.fr/simgrid/simgrid.dtd
1847 (the file at this address now documents the changelog since its v1)
1848 - A warning is emitted for unit-less values (they are still accepted).
1849 - speed. Default: 'f' or 'flops'. Also defined:
1850 'Yf', 'Zf', 'Ef', 'Pf', 'Tf', 'Gf', 'Mf', 'kf'
1851 'yottaflops', 'zettaflops', 'exaflops', 'petaflops', 'teraflops', 'gigaflops', 'megaflops', 'kiloflops'
1852 - bandwidth. Default: 'Bps' bytes per second (or 'bps' for bits but 1 Bps = 8 bps)
1853 Also defined in bytes: 'TiBps', 'GiBps', 'MiBps', 'KiBps', 'TBps', 'GBps', 'MBps', 'kBps', 'Bps'
1854 And the same in bits: 'Tibps', 'Gibps', 'Mibps', 'Kibps', 'Tbps', 'Gbps', 'Mbps', 'kbps', 'bps'
1855 - latency. Default: 's' second. Also defined:
1856 'w' week, 'd' day, 'h' hour, 'm' minute, 'ms' millisecond, 'us' microsecond, 'ns' nanosecond, 'ps' picosecond
1858 * bin/simgrid_update_xml can upgrade your files automatically (won't convert unit-less values)
1859 tools/sg_xml_unit_converter.py may help (but it's just a warning and will probably ever be).
1862 * s4u::Host is now the preferred public interface to the Host features.
1863 sg_host_* functions are C bindings to the exact same behavior
1864 MSG_host_* and SD_workstation_* are #define to the sg_host_* ones
1867 * The examples were completely reorganized (in C and Java), for your browsing pleasure.
1868 * Kill all deprecated functions (the ones you had when declaring MSG_DEPRECATED).
1869 They were deprecated since a few years, and probably did not even compile anymore.
1872 * The API has been profoundly modified to directly use the core objects instead of redefining its own.
1873 SD_Workstation_t and SD_link_t are now sg_host_t and sg_link_t respectively.
1874 Some functions have also been renamed for consistency. Backward compatibility is maintained, but users are
1875 encouraged to update their codes. A list of the modified functions can be found at the end of
1876 include/simgrid/simdag.h
1879 * simgrid::simix::kernelImmediate() is the closure callback. It ensures that
1880 the lambda or closure passed as a parameter will run in kernel mode.
1881 All the callback functions should be rewritten to that interface at some point.
1884 * Reorganizing and cleaning the internals all around the place.
1887 * Remove old default barrier/bcast buggy algorithms (see #18407)
1888 * Various bug fixes to handle more codes
1889 * Remove the need for the --foreground option of smpirun (it is still
1890 accepted for backward compatibility).
1893 * Kill the setset data container: MC don't use it anymore.
1894 * Kill the queue data container: it made more sense with GRAS.
1895 * Kill the xbt_peer_t data type: it's useless without GRAS.
1896 * Kill rm_cb feature of config sets: it was never useful.
1897 * Kill graphxml parsing feature. It was not used.
1898 * Kill the deprecated code protected by XBT_USE_DEPRECATED
1900 - xbt_dynar_sort_strings(), when the content is char*
1901 - xbt_str_parse_int / xbt_str_parse_double, wrapping strtol/strtod
1902 They throw exceptions on invalid input;
1903 * C++ support for declaring CLI flags (simgrid::config::Flag);
1904 * class for abstracting different signal backends (simgrid::xbt::signal).
1905 with no external dependencies (we need very simple signals).
1908 * refactoring and cleanup of the code;
1909 * ongoing process to cleanly separate the model-checking algorithms
1910 from the code model-checking support.
1912 -- Wed Apr 27 21:00:53 CEST 2016 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
1914 SimGrid (3.12) stable; urgency=low
1916 The Facelift Release.
1919 * Require g++ v4.7 at least to not speak prehistorical C++.
1920 * Require Boost 1.48 (for signal2 component).
1921 * Java must be version 7 at least when activated.
1922 * Builds on Windows again (including Java bindings).
1923 * Tracing is now always enabled (no way to turn it out)
1924 * Remove GTNetS. It was not working anyway.
1925 * Various cleanups in the cmake scripts.
1926 * Move headers around to sort them out on installed systems:
1927 - instr/instr.h -> simgrid/instr.h
1928 - instr/jedule/* -> simgrid/jedule
1929 - simdag/datatypes.h was removed
1930 - simdag/simdag.h -> simgrid/simdag.h
1931 - msg/datatypes.h was removed
1932 - msg/msg.h -> simgrid/msg.h
1935 * Interface improvement:
1936 - Rename MSG_host_is_avail(h) to MSG_host_is_on(h)
1937 - Sanitize the interface in MSG_task_ module:
1938 - Merge two functions that were close enough but misleading:
1939 set_compute_duration(t) -> set_flops_amount(t)
1940 get_remaining_computation(t) -> get_flops_amount(t)
1941 - set_data_size(t) -> set_bytes_amount(t)
1942 get_data_size(t) -> get_bytes_amount(t)
1943 - Massive cleanups in the functions related to the energy
1944 - MSG_host_get_pstate_number() -> MSG_host_get_nb_pstates()
1945 - New: MSG_host_get_pstate()
1947 - msg/energy/onoff: switching hosts on and off
1949 * Interface improvement:
1950 - Rename Host.isAvail() to Host.isOn()
1951 - Rename Process.currentProcess() to Process.getCurrentProcess()
1952 - Rename Task.setDataSize() to Task.setBytesAmount()
1953 - Merge Task.getRemainingDuration() and Task.getComputeDuration() into Task.getFlopsAmount()
1955 - #18874: Actually allows the GC to reclaim tasks
1959 - SIMIX_process_throw: raises an exception in a remote process
1960 * Refactoring: Separate sub-modules
1961 - libsmx: the public interface, as libc in a real system
1962 - popping: the strange dance that converts a user request into a kernel handling
1963 - smx_context_*: the virtualization mechanisms that embed the user code
1964 - smx_*: the handling of each simcalls
1965 * Interface cleanup:
1966 - simcall_host_set_power_peak_at -> simcall_host_set_pstate
1967 * Rename smx_action_t into smx_synchro_t, making explicit that these
1968 things are used to synchronize processes with their environment.
1969 For example, a communication is a sort of synchronization involving
1970 the communicating processes (that may block until the exchange) and
1971 the platform. The same can be said from computations, etc.
1973 - #18888: segfault when a process ends before its kill_time
1977 - Onesided early support for: MPI_Win_(create, free, fence, get_name, set_name, get_group), MPI_Get, MPI_Put, MPI_Accumulate, MPI_Alloc_mem, MPI_Free_mem.
1978 - MPI_Keyval*, MPI_Attr* functions, as well as MPI_Comm_attr*, MPI_Type_attr* variants (C only, no Fortran support yet)
1979 - MPI_Type_set_name, MPI_Type_get_name
1980 - MPI_*_c2f and MPI_*_f2c functions
1981 - MPI_Info_* functions (beware, get_nthkey may not follow the insertion order)
1982 - MPI_Pack, MPI_Unpack and MPI_Pack_size functions
1983 - Activate a lot of new tests from the mpich 3 testsuite
1985 - Constant times can be injected inside MPI_Wtime and MPI_Test through options smpi/wtime and smpi/test
1986 - InfiniBand network model added: Based on the works of Jerome Vienne
1987 http://mescal.imag.fr/membres/jean-marc.vincent/index.html/PhD/Vienne.pdf
1988 - When smpi/display_timing is set, also display global simulation time and application times
1989 - Have smpirun, smpicc and friends display the simgrid git hash version on --git-version
1990 * Collective communications
1991 - SMP-aware algorithms are now dynamically handled. An internal communicator is created for each node, and an external one to handle communications between "leaders" of each node
1992 - MVAPICH2 (1.9) collective algorithms selector: normal and SMP algorithms are handled, and selection logic is based on the one used on TACC's Stampede cluster (https://www.tacc.utexas.edu/stampede/).
1993 - Support for Rabenseifner Reduce/Allreduce algorithms (https://fs.hlrs.de/projects/par/mpi//myreduce.html)
1995 - Replay now uses algorithms from wanted collective selector
1996 - Replay can be used with SMP-aware algorithms
1997 - Memory occupation of replay should now be contained (temporary buffers allocated in collective algorithms should be shared between processes)
1998 - Replay can now replay several traces at the same time (check examples/smpi/replay_multiple example), to simulate interactions between several applications on a given platform. User can specify the start time of each instance. This should also allow replay + actual applications to run.
2000 - [#17799]: have mpi_group_range_incl and mpi_group_range_excl better test some corner cases
2001 - Correctly use loopback on fat-tree clusters
2002 - Asynchronous small messages shouldn't trigger deadlocks anymore
2003 * Energy/DVFS cleanup and improvement
2004 - smpi_set_host_power_peak_at() -> smpi_set_host_pstate()
2005 - new: smpi_get_host_pstate()
2008 - "Full" network optimization flag was broken since Surf++
2009 - Better handling of precision flags in maxmin
2010 - Fix bug causing sometimes "Impossible" errors
2011 - Properly pass cluster properties to included hosts
2012 * Improvement of the Energy plugin.
2013 - Always update the consumption before returning that value
2014 - New property: watt_off to denote the dissipation when the host is off
2015 - New functions getWattMinAt and getWattMaxAt to retrieve the
2016 dissipation of pstates that we are not currently at.
2017 * Java: class NetworkLink renamed to Link
2018 * New function: simcall_process_get_kill_time()
2019 * Massive rename s/workstation/host/
2020 - That's intrusive, but that's good for the project consistency. Sorry.
2021 - Change config option "workstation/model" into "host/model"
2024 - Add a xbt_heap_update function, to avoid costly xbt_heap_remove+xbt_heap_insert use
2025 - Add a xbt wrapper for simcall_mutex_trylock (asked in [#17878])
2026 - Add two new log appenders: rollfile and splitfile. Patch by Fabien Chaix.
2027 - xbt_dirname and xbt_basename for non-POSIX systems
2029 * The model checker now runs as a separate process.
2030 * The model checker runs must now be launched with the new simgrid-mc program.
2031 * Record/Replay: the MC can display a textual representation of a path in the
2032 execution graph. It can then be replayed outside of the model checker.
2034 -- Mon Oct 12 06:02:41 CEST 2015 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2036 SimGrid (3.11) stable; urgency=low
2041 * Normalizing pointers addresses tool for better diff between logs
2044 * Add cloud examples using new VMs
2045 - examples/msg/cloud/two_tasks_vm.tesh
2046 - examples/msg/cloud/simple_vm.tesh
2047 - examples/java/cloud/cloud.tesh
2048 - examples/java/cloud/migration/migration.tesh
2049 * Add java surf examples:
2050 - examples/java/surfPlugin/surf_plugin.tesh
2051 - examples/java/reservationSurfPlugin/reservation_surf_plugin.tes
2052 - examples/java/surfCpuModel/surf_cpu_model.tesh
2053 * Add SMPI+MSG example:
2054 - examples/smpi/smpi_msg_masterslave/
2059 - msg task destroy cancel test
2060 - msg_host on/off test
2061 * Move all tests in testsuite to teshsuite (adding tesh files)
2062 * Restructure teshsuites
2063 - one folder for each kind of test
2064 * Restructure AddTests.cmake
2066 - structure the order of tests (with sections)
2069 * Add virtual machine
2070 - creation of a VM on a PM
2071 - migration of a VM from a PM to another PM
2073 - MSG_process_join(msg_process_t process, double timeout)
2074 - msg_bar_t MSG_barrier_init(unsigned int count)
2075 - int MSG_barrier_wait(msg_bar_t barrier)
2076 - void MSG_barrier_destroy(msg_bar_t barrier)
2077 - msg_as_t MSG_environment_as_get_by_name(const char * name)
2078 * New option "msg/debug_multiple_use" to help debugging when a task is used
2081 - Improvements and finalization of MSG_storage, MSG_file APIs and their
2083 - Increase code coverage in test suites
2087 * Protect context stacks against stack overflow. The number of protected memory
2088 pages allocated on the top of each stack (1 by default) can be configured
2089 with the new command line option --cfg=contexts/guard_size:<value>.
2090 * Simcalls are now generated by a python script that
2091 - generates files included by SimGrid
2092 - checks that all the functions exist, and proposes prototypes
2094 - remove sem_destroy, file_set_data, comm_destroy, vm_set_state,
2095 host_set_data, host_get_data
2097 - simcall_process_join(smx_process_t process, double timeout)
2098 * Fix bug where sleeping processing could not be suspended.
2101 * Translate surf models from C to C++
2102 - Generic classes for all models: Model, Resource, Action
2103 - A generic interface for each kind of model (CPU, Network, Storage
2104 Workstation, WorkstationVM)
2106 * Translate surf routings from C to C++
2107 * Add callbacks using sigc++ or boost::signals2
2108 - Add callback functions for resource creation/destruction
2109 - Add callback functions for action state change
2110 - Handle Energy as a plugin
2111 * Replace swag by boost::intrusive
2112 * Add new routing models for clusters. For documentation, see
2113 http://simgrid.gforge.inria.fr/simgrid/latest/doc/platform.html#pf_cluster
2114 - tori, with topology="TORUS" and topo_parameters="ndim1,ndim2,...,ndimn"
2115 parameters for cluster tag
2116 - Fat trees, with topology="FAT_TREE" and
2117 topo_parameters="h;m1,...,mh;w1,...,wh;p1,...,ph" parameters for cluster tag
2118 - see examples/platforms/torus_cluster.xml and
2119 examples/platforms/fat_tree_cluster.xml
2120 * More documentation
2123 * Hostfiles support host:nb_processes construct to deploy several processes on
2125 * Collective communication algorithms should not crash if used with
2126 improper number of nodes and report the error.
2127 * SMPI now partially supports MPI_Topologies: MPI_Cart_create, MPI_Cart_shift,
2128 MPI_Cart_rank, MPI_Cart_get, MPI_Cart_coords, MPI_Cartdim_get,
2129 MPI_Dims_create, MPI_Cart_sub are supported.
2130 * New interface to use SMPI programmatically (still depends on MSG for
2131 some parts, see examples/smpi/smpi_msg_masterslave):
2132 - SMPI_app_instance_register(const char *name, xbt_main_func_t code,
2136 * Global variables privatization in MPI executables is now performed at runtime
2137 with the option smpi/privatize_global_variables (default:no).
2138 Limitations: Linux/BSD only, with mmap enabled. Global variables inside
2139 dynamic libraries loaded by the application are not privatized (static
2140 linking with these libraries is advised in this case)
2143 * Options defined in XML work correctly now.
2146 * New cmake option, enable_lib_in_jar, to control whether native libraries are
2147 copied into simgrid.jar or not (ON by default). Use this option if you want
2148 to reduce the size of the installed simgrid.jar, *and* the native libraries
2149 are kept installed elsewhere.
2150 * Surf binding with SWIG (code generated in maintainer mode only):
2151 - plugin to handle callbacks
2152 - CPU model only for the moment
2155 * Supernovae build mode is definitively removed. It was used to improve
2156 inlining and inter-module optimizations. It is nowadays superseded by
2157 link-time optimizations commonly available in compilers.
2158 * Update ns-3 find lib. Bindings for ns-3 should work again now.
2159 * Add boost dependency for surf++
2160 * Add new macro for tests
2161 - ADD_TESH(name <tesh_args>)
2162 - ADD_TESH_FACTORIES(name "thread;ucontext;raw" <tesh_args>)
2166 - xbt_bar_t XBT_barrier_init(unsigned int count)
2167 - int XBT_barrier_wait(xbt_bar_t barrier)
2168 - void XBT_barrier_destroy(xbt_bar_t barrier)
2169 * Make the xbt_os_time module public
2171 -- Sat May 31 22:39:38 CEST 2014 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2173 SimGrid (3.10) stable; urgency=low
2175 The Clean Diaper Release, a.k.a. SimGrid is leak-free.
2178 * Reintegrate Java to the main archive as desynchronizing these
2179 package is not acceptable anymore (Java is now considered stable)
2180 * Add explicit synchronization facilities through semaphores
2181 * Bug fix: Task.setDataSize() only changed the C world, not the value
2182 cached in the Java world
2185 * Dramatically change the way files are handled. API and internals changed, but
2186 this part of MSG was not considered as production grade either.
2187 * Add explicit synchronization facilities through semaphores
2188 * Add a new function MSG_host_get_process_list()
2189 * Preliminary DVFS support (see examples/msg/energy/ for details)
2192 * SMPI is now included directly in the libsimgrid as the windows
2193 linker doesn't force us on splitting it anymore.
2194 * Improvements of the SMPI replay tool:
2195 - Most of the collective communications are now rooted in the same process as
2196 in the original application.
2197 - Traces now rely on the same MPI data type as the application (MPI_BYTE was
2198 used until now). Multiple data types can now be used in a trace.
2199 - The replay tool now supports traces produce either by TAU or a modified
2201 - Bug Fix: the compute part of the reduce action is now taken into account.
2202 - Gatherv collective is now supported
2203 - SimGrid (SMPI for now) can generate replay traces as well. Option -trace-ti
2204 of smpirun outputs time independent traces for the current run. One file
2205 is created per process. If too many processes are simulated, this behavior
2206 can be changed to one file for all processes by using the
2207 tracing/smpi/format/ti_one_file flag
2208 * smpirun generates the host file if needed (with given host count and platform)
2209 * Integration of more than 100 STAR-MPI, MPICH, OpenMPI collective algorithms
2210 - allows to select one in particular with --cfg=smpi/coll_name:algorithm
2211 - allows to use the decision logic of OpenMPI(1.7) or MPICH(3.0.4) by setting
2212 --cfg=smpi/coll_selector:(mpich/ompi)
2213 * Support for new functions: MPI_Issend, MPI_Ssend, Commutative operations in
2215 * Add a --cfg:tracing/smpi/internals option, to trace internal communications
2216 happening inside a collective SMPI call.
2217 * Fix the behavior of complex data types handling.
2218 * Make MPI_Wtime another synchronization point to take computations into
2220 * Replace MPICH-1 test suite by the one from MPICH 3.0.4. Can be built using
2221 enable_smpi_MPICH3_testsuite flag in cmake. Run with ctest.
2222 * Add all missing Fortran bindings, SMPI should work with Fortran 90
2223 (no privatization of global variables yet)
2224 * Preliminary DVFS support (see examples/smpi/energy/ for details)
2227 * Verification of liveness properties is now available for SMPI applications
2228 (in addition to MSG applications)
2229 * Bugged examples using SMPI in examples/smpi/mc/
2230 * Add --cfg=model-check/visited option. Allows the verification of infinite
2231 programs. Detection of loops in the execution thanks to the system state
2232 comparison and reduction of the state space to explore. Can be combined with
2233 DPOR for safety properties.
2236 * Allow to change SimGrid configuration (see --help) within the code
2237 thanks to SD_config() as it can be done in MSG.
2238 * Add a new function SD_task_set_amount() upon user request.
2241 * Handle units for values (10ms, 10kiloflops, 10Bps, 1GB, ...)
2242 * Remove rule based routing (no more PCRE dependency)
2243 * Add a limiter_link option to cluster tag, to specify a maximum reachable
2244 bandwidth in fullduplex mode when it is less than twice the nominal bandwidth.
2245 * Add a loopback_bw and loopback_lat options to cluster tag.
2246 * Fix the peer tag that could not be mixed with other AS within a Vivaldi
2247 routing. Now peers are encapsulated in an AS and have their own private
2248 router but this is transparent.
2251 * Our own implementation of getline is renamed xbt_getline, and gets
2252 used even if the OS provide a getline(). This should reduce the
2253 configuration complexity by using the same code on all platforms.
2254 * New type: xbt_cfg_elm_boolean.
2255 * Allow to use yes/no for boolean configuration options in the command line.
2256 * Allow to disable SimGrid cleanups at exit from command line option.
2257 There are situations where one may want a simulation to end with an exit.
2258 Unfortunately, calling exit may cause SimGrid to segfault, which is quite
2259 annoying when scripting around the simulator. Adding a
2260 --cfg=clean_atexit:no allows to circumvent this issue.
2263 * Lots of memory leaks were corrected in this release.
2264 There is no known memory leaks anymore, in all of our 600+ tests.
2265 * New command line option --version, to get SimGrid version information.
2266 Packagers may want to add extra words to SIMGRID_VERSION_EXTRA defined in
2268 * Supernovae builds are deprecated, and expected to be removed in the next
2271 -- Sun Nov 17 00:26:44 CET 2013 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2273 SimGrid (3.9) stable; urgency=low
2275 The Grasgory release: GRAS is really dead now.
2277 * Complete overhaul of the internal host structures scheme.
2280 * If you use GRAS, you should stay at SimGrid 3.5 (at most) since it
2281 was considered as experimental and badly maintained since then.
2282 * Keeping it was thus a trap to our potential users, that could take
2283 it instead of MSG or SMPI by mistake despite is pity state.
2284 * GRAS seems to have very few users (if any), and no one volunteered
2285 to maintain it further. It also induces a lot of XBT code (for
2286 portability sake), that must be maintained too.
2287 * For all these reasons, we killed GRAS. If someone wants to revive it
2288 in the future, don't cry, our git history still remembers of GRAS.
2291 * Major overhaul. Merge our documentation again as time proved that
2292 splitting it was really not helping our users.
2293 * Further improve the developer documentation to help newcomers
2294 hacking on SimGrid itself. The user documentation (and in
2295 particular, the beginner documentation) is still in a sorry state.
2298 * Now works on Windows too!
2299 * Much more extensive test suite, from MPICH
2302 * Add a new loader (SD_PTG_dotload) that creates a parallel task graph
2303 (i.e., a DAG whose nodes are parallel tasks) from a dot file. Creates a
2304 dynar of SD_TASK_COMP_PAR_AMDAHL and SD_TASK_COMM_MXN_1D_BLOCK tasks.
2305 * Bug fix: let task be scheduled when the last dependency to be solved is
2306 a control dependency.
2307 * Remove SD_load_environment_script function.
2308 Use the C sg_platf function if you want to declare a platform
2312 * New function: MSG_process_get_number()
2313 * Old function documented: MSG_config()
2314 * Remove MSG_load_platform_script function
2315 Use the C sg_platf function if you want to declare a platform
2319 * Change the default value of the TCP_gamma constant (maximal size of TCP
2320 congestion window) to a more realistic 4MiB value. If you notice changes in
2321 your simulation results, you can fall back to the previous 20k tiny window
2322 by adding --cfg=network/TCP_gamma:20000 on command line.
2323 * (Hopefully) fix a bug wrt periodic availability and state traces
2324 * Bug fix: use default values at start when first event in availability/state
2325 trace is not at time 0.
2328 * remove the "new_" part of function name sg_platf_new_trace_connect
2329 (resulting in sg_platf_trace_connect), since it does not create
2333 * Kill synchronized dynars, and xbt_dynar_dopar(). We cannot think of a
2334 use case where it's really mandatory, and maintaining it was a pain in
2336 * New: xbt_fifo_search(), search an item with a user-provided
2337 comparison function instead of dumb pointer comparison.
2340 * Fix the lua deployment:
2341 Use `simgrid.init_application()` before deployment instead of
2342 `simgrid.msg_register_application()` after.
2345 * Transfer the tracing files into the corresponding modules.
2347 -- Tue Feb 5 11:31:43 CET 2013 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2349 SimGrid (3.8.1) stable; urgency=low
2351 The "we are told that some people want to also *install* the simgrid
2354 * Add missing file "tesh.1" to the archive.
2356 -- Sat Oct 27 16:12:11 CEST 2012 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2358 SimGrid (3.8) stable; urgency=low
2360 The Psssshiiiit release: SimGrid jumps into the Cloud.
2363 * Add an experimental interface to manipulate VMs. They are mainly
2364 process groups with very few intrinsic semantic, but they should
2365 allow you to build the semantic you want easily.
2366 * New function: MSG_host_set_property_value()
2367 * New function: MSG_process_on_exit(). To clean memory in all cases.
2368 * Bug fixes that made the host (and link) failures unusable.
2369 * Add a way to auto-restart process when the host in which they are
2370 executing comes back (ON_FAILURE="RESTART" on deployment file,
2371 MSG_process_auto_restart_set).
2372 * Use the "msg_" prefix for all datatypes (instead of m_, msg_ and MSG_),
2373 please stop using the old ones, they are DEPRECATED.
2375 * Deprecate functions MSG_global_init() / MSG_global_init_args()
2376 Please use MSG_init() instead. (reducing the amount of entry
2377 points in the library helps us).
2378 * Make it impossible to link against the wrong version of the lib
2379 * Deprecate MSG_clean(). No need to call it anymore.
2380 * Function MSG_get_host_number() is not deprecated anymore.
2383 * Split the doc into a user guide and a reference guide.
2384 * Start a developper guide to help people hacking on SimGrid.
2387 * Enable tracing by default. This modules rocks you should use it.
2388 * Remove option custom_flags. Now use environment variables CFLAGS
2390 * Use default cmake things to detect lua instead of home grown ones.
2391 * New option "enable_mallocators" to disable mallocators, for debugging
2392 purpose ("on" by default).
2395 * Bug fixes around the resource failures: don't let the processes
2396 survive the host they are running onto.
2397 * Add an interface to auto-restart processes when the host in which they are
2398 executing comes back.
2399 * Ensures that SIMIX_clean is called automatically. It's not part of
2400 the public interface anymore (bindings should be updated).
2403 * Bug fix for when SD_Simulate is called with a positive value: be careful
2404 when comparing doubles. Sometimes they are different for non significant
2406 * New types of typed tasks. SD_TASK_COMP_PAR_AMDAHL represents a
2407 parallel task whose initial work is distributed among host according
2408 to the Amdahl's law. Such tasks are created with a parameter alpha
2409 that corresponds to the non-parallelizable part of the computation.
2410 SD_TASK_COMM_PAR_MXN_1D_BLOCK represents a complex data redistribution
2411 between two sets of workstations assuming a 1D block distribution (each
2412 workstation owns a similar share of data) on both sides.
2414 These tasks can be scheduled with SD_task_schedulel or SD_task_schedulev.
2415 Data redistribution will be automatically scheduled once parent and child
2416 are both scheduled. The filling of computation_amount and
2417 communication_amount structures is now done seamlessly thanks to the chosen
2419 * New function SD_workstation_dump to display various information
2420 * New function SD_task_set_rate to throttle the bandwidth allowed to be used
2421 by a SD_TASK_COMM_E2E typed task. This rate depends on both the nominal
2422 bandwidth on the route onto which the task is scheduled and the amount of
2424 To divide the nominal bandwidth by 2, the rate then has to be:
2425 rate = bandwidth/(2*amount)
2426 * Compute tasks that have failed can now be rescheduled and executed again
2427 (from their beginning)
2428 * Increasing source code coverage (src/simdag is now covered at 95.8%
2432 * Re-implement time-independent trace replay using SMPI (at the
2433 smpi_smp_* level) instead of MSG. This should replace
2434 examples/msg/actions/actions.c
2435 * Implement support of MPI Datatypes (vectors, hvectors, indexed,
2436 hindexed and structs)
2437 * Implement the exchange of non-contiguous data.
2438 [Khalid Hasanov & Jean-Noel Quintin] Thanks for the patch, guys.
2439 * Correct behavior of smpi/sender_gap and set its default value to 0
2440 * Add option to asynchronously send small messages to allow better
2441 simulation of pt2pt communications. --cfg=smpi/async_small_threshold:value
2442 specifies the size in bytes under which messages will be asynchronously sent.
2443 * Add support of MPI_Iprobe, MPI_Probe, MPI_Testall, MPI_Wtick functions
2444 * SMPI now handles more MPI specific values in input. Closes [#14389] and [#14388]
2447 * New C interface to define a platform: XML is now optional.
2448 For more info, please check include/simgrid/platf.h.
2449 * New interface to define random platforms from the C:
2450 For more info, please check include/simgrid/platf_generator.h and
2451 examples/msg/masterslave/masterslave_platfgen.c
2452 * Export a sg_cmdline dynar containing all the arguments we got from
2456 * Two new tracing options for adding comments to trace file so you
2457 can track your experiments (see --help-tracing for details).
2458 * New option to generate an impoverished trace file (--cfg=tracing/basic:1)
2459 * Adding the SimGrid version that generated the trace file as a comment.
2460 * Instrumenting other MSG functions (MSG_task_isend_with_matching and MSG_task_dsend)
2461 * Fix to avoid key clashes on Paje links
2462 * Other minor fixes related to the Paje specification
2465 * Functions xbt_dict_hash() and xbt_dict_hash_ext() are made public,
2466 and renamed to xbt_str_hash() and xbt_str_hash_ext().
2467 * New function: xbt_os_timer_resume() to restart a timer w/o resetting it.
2468 * Greatly improve the robustness of mmalloc to user errors (such as
2469 using an area after freeing it, or freeing it twice)
2471 -- Thu Oct 25 17:30:06 CEST 2012 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2473 SimGrid-java (3.8.1) stable; urgency=low
2475 * New module: org.simgrid.trace.Trace (SimGrid trace bindings)
2476 Warning: all methods are visible, but only some of them are
2477 implemented so far. Check the source (src/jtrace.c)
2478 for further information.
2479 * New module: org.simgrid.msg.File (SimGrid File management functions)
2480 * New Module: org.simgrid.msg.VM (SimGrid interface to mimick IAAS clouds)
2481 * Change the meaning of Process.restart: now restart the process from
2482 the beginning, like MSG_process_restart in C.
2483 * Add Process.setAutoRestart: handling of process restart when failed
2485 * Add Process.getProperty, Host.getProperty, Host.getProperty: allows
2486 you to retrieve the properties of the processes/hosts
2487 * Deprecate Msg.clean(): you can just forget about it now.
2488 * New function Process.getCount(), that only works when compiling
2489 with the not yet released version 3.9 of the C library.
2491 * New context factory based on Coroutines. It mandates a modified JVM
2492 but then, the simulations run about five times faster, and there is
2493 no limit to the amount of processes (beside of the available memory).
2495 -- 2012-12-04 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2497 SimGrid (3.7.1) stable; urgency=low
2500 * Restore the prototype of MSG_process_create_with_environment() to
2501 the pre-3.7 situation by removing the kill_time argument.
2502 * Add a MSG_process_set_kill_time() function instead.
2505 * Fix weird behaviors when dealing with parallel tasks.
2508 * Simgrid is now built as a dll.
2509 * Simgrid-java now works on Windows.
2510 * Simgrid-Java is now included into Windows package.
2513 * First pre-build package for MacOSX.
2516 * Fix compilation when using MSG_USE_DEPRECATED.
2517 * Fix some compilation issues on Macs and Windows.
2518 * Reduce the number of failing tests on exotic systems, like Debian/Hurd.
2519 * Environment variables CFLAGS and LDFLAGS are now honored by cmake.
2521 We discovered that the Lua console is broken, but we are missing the
2522 manpower to fix it right now. The problem existed in 3.7 too, so we
2523 are not blocking the release for that. Sorry if you depended on this
2524 feature, any help would be really welcome.
2526 -- Thu Jun 7 2012 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2529 SimGrid-java (3.7.1) stable; urgency=low
2531 The "Java aint got to be bloated and slow" release
2534 * Various internal cleanups and performance improvement
2535 Simulations are expected to run up to twice faster or so
2536 * Make Process.kill(process) an instance method, not a static one
2537 * User processes are not java.lang.Thread subclasses.
2538 This breaks the compatibility (sorry), but previous API was
2539 brain-dead, making it impossible to have non-trivial
2540 initializations in the process constructor.
2541 * Require a full constructor per Process sub-class.
2542 Kinda breaks the compatibility (sorry), but this allows a much more
2543 efficient way to launch the processes at simulation startup.
2544 * Do not embeed our version of semaphores, java 1.5 can be considered
2545 as sufficiently prevalent for us to not dupplicate its features.
2549 * Add examples for almost every part of the API
2550 We spotted and fixed a lot of bugs in the process
2552 * New module: asynchronous communication API
2553 * New function: Process.sleep()
2554 It takes milliseconds as argument, just as java.lang.Thread.sleep()
2555 * New module: org.simgrid.msg.Mutex (SimGrid mutexes)
2556 * New module: org.simgrid.msg.RngStream (RngStreams random generators)
2558 -- 2012-06-12 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2560 SimGrid (3.7) stable; urgency=low
2562 The "spring cleanups (before the next Big Project kicks in)" release.
2565 * We can specify the SMPI latency/bandwidth factor with command line
2566 add --cfg=smpi/bw_factor:"threshold0:value0;...;thresholdN:valueN"
2567 or add --cfg=smpi/lat_factor:"threshold0:value0;...;thresholdN:valueN"
2568 You can also use the "config tag" from platform file by adding this line
2569 <prop id="smpi/bw_factor" value="threshold0:value0;...;thresholdN:valueN"></prop>
2570 (see "example/platforms/tag_config.xml" to use "config tag").
2571 Note that the command line supersedes the platform file configuration.
2572 * Change the correction factors used in LMM model, according to
2573 the latest experiments described in INRIA RR-7821.
2574 Accuracy should be improved this way.
2575 * Use the partial invalidation optimization by default for the
2576 network too. Should produce the exact same results, only faster.
2577 * Major cleanup in surf to merge models and split some optimization
2578 mechanisms from the core of the models. As a result you can now
2579 specify which model to use (e.g., --cfg=network/model:LV08
2580 --cfg=cpu/model:Cas01) and which optimization mode to use
2581 (e.g., --cfg=network/optim:lazy --cfg=cpu/optim:TI).
2582 Incompatible combinations should err at initialization. See
2583 --help-models for the list of all models and optimization modes.
2584 * The CLM03 workstation model was dropped for simplicity because it
2585 used the deprecated CM02 network model. Use default instead.
2586 * Rename the TCP_gamma configuration option to network/TCP_gamma
2587 * Rename the coordinates configuration option to
2588 network/coordinates, and document it
2589 * Use now crosstraffic keyword instead of the terribly misleading
2590 fullduplex keyword. It is activated by default now in the current
2591 default model, use --cfg=network/crosstraffic:0 to turn it off.
2592 * Ongoing refactoring the model parsing to make XML files optional
2593 See include/simgrid/platf.h for details (still to be completed)
2596 * Major overhaul of the documentation. Almost instructive now :/
2597 * Deprecate the use of m_channel_t mechanism like MSG_task_{get,put}
2598 functions and friends. This interface was considered as
2599 deprecated since over 2 years, it's time to inform our users that it is.
2600 Switch to MSG_task_{send,recv} instead, or compile SimGrid command line
2601 'cmake -Dcustom_flags="-DMSG_USE_DEPRECATED" .' if you really need to
2602 use these (crappy) functions in your code.
2603 These functions will be removed soon. Stop using them now.
2604 * Deprecate MSG_get_host_{table,number}
2605 Implement MSG_hosts_as_dynar() instead.
2606 * Implement MSG_processes_as_dynar() (Closes gforge #13642)
2607 * Remove the public field msg_host_t->name. Use MSG_host_get_name()
2610 * Stabilize the parallel execution mode of user contexts
2611 * Introduce configuration variables to control parallel execution:
2612 - contexts/synchro: Synchronization mode to use when running
2613 contexts in parallel (either futex, posix or busy_wait)
2614 - contexts/parallel_threshold: Minimal number of user contexts
2615 that must be part of a scheduling round to switch to parallel
2616 execution mode (raw contexts only)
2617 * Fix bugs that prevented to use suspend/resume along with
2618 synchronization structures.
2619 * Fix bugs in process termination that lead to invalid memory access
2620 in very specific conditions.
2623 * Introduce a parallel mode for the models (controlled by surf/nthreads
2624 configuration item). In our tests, running the models in parallel
2625 never lead to any speedups because they are so fast that the gain
2626 of computing each model in parallel does not amortizes the
2627 synchronization costs, even when ultra fast futexes are used.
2628 This is released anyway because YMMV.
2631 * Performance boost by using a swag internally to compute the set of
2632 tasks that are finished and should constitute the return value of
2636 * Enable it by default now that it is considered rather stable.
2639 * Documentation of the tracing functions.
2640 * Performance gains when tracing categorized/uncategorized resource
2641 utilization by avoiding calls to get route when updating resource
2642 variables. LMM constraints are being used instead.
2643 * API changed to set task categories. Use MSG_task_set_category instead
2644 of TRACE_msg_set_task_category, and SD_task_set_category instead
2645 of TRACE_sd_set_task_category. They only work if ENABLE_TRACING is ON.
2646 * Bugfix for graphicator, routes not correctly obtained, memory leaks
2647 * Examples for link user variables added (see at examples/msg/tracing/)
2648 * Deprecated function TRACE_msg_set_process_category completely removed
2649 * Trace header updated according to the latest Paje file format
2650 * Tracing network lazy updates, no longer obligate users to use full updates
2651 * --cfg=tracing/platform:1 also registers power/bandwidth variables
2652 * Experimental: let user code declare/set/push/pop application states for hosts
2653 * API changed to allow the manual creation of graph configuration files
2654 for Triva. See TRACE_get_node_types() and TRACE_get_edge_types().
2657 * Improve the API of Lua MSG bindings, using the Lua spirit.
2658 * Each simulated process now lives in its own Lua world (globals are
2659 automatically duplicated). It helps writing simulators. Will allow
2660 to run Splay programs within SimGrid in the future.
2661 * Add a Chord example in Lua, equivalent to the MSG one.
2664 * Start the implementation of a solution to express temporal
2665 properties, not only local assertions. This is still an
2666 experimental work in progress, stay clear from it to be safe.
2670 - Add new runtime parameters --help-logs and --help-log-categories
2671 to display information about supported logging parameters and
2673 - Old deprecated parameters --{gras,surf,msg,simix,xbt}-log=...
2674 don't exists anymore.
2675 * Mallocators: allow value NULL for the reset function.
2677 - New function xbt_dict_new_homogeneous(void(*)(void*)) to
2678 create homogeneous dictionaries, where all the elements share the
2679 same free function. Non homogeneous dictionaries will be
2680 deprecated in the next release.
2681 - Dicts of scalar elements (xbt_dicti_*) are deprecated.
2682 - Multi-level dictionaries are deprecated.
2684 - new function xbt_dynar_search_or_negative() that is useful when
2685 you have less than 2 million elements in your dynar and don't
2686 want of the extra complexity of catching exceptions when the
2687 element is not found.
2689 - Make xbt_os_thread module (for thread portability) public.
2690 Documentation is still to come, sorry.
2692 - Cleanups and simplifications to make it maintainable again.
2693 - Exotic features (such as memalign and valloc) were removed.
2694 - The metadata were extended and improved so that the
2695 model-checker becomes able to explore and inspect the heaps.
2696 - This may induce a performance drop when enable_model-checking is
2697 ON in cmake (even if it's not used in the simulation), but it is
2698 necessary at this point to get MC working.
2700 Turn model-checking OFF if simulation performance matters to you.
2701 Not enabling it at runtime is not enough, disable it in cmake.
2703 -- Tue May 15 11:30:19 UTC 2012 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2706 SimGrid (3.6.2) stable; urgency=low
2708 The "Not coding new stuff allows to polish old things" release.
2711 * New bindings to the NS3 packet level simulator (experimental)
2712 * Use the raw (efficient) execution contexts instead of the sysv
2713 (portable) ones when possible.
2714 * libpcre is now mandatory in any cases since not using it led to
2715 severe performance loss and possibly other issues
2716 * Update the XML platforms:
2717 - G5K: include the latest machine in Nancy
2718 - GridPP and LCG: new platforms
2719 * Documentation was partially updated, at least (more to come)
2721 Bug fixes, cosmetics and small improvements
2722 * Free terminated processes before the end of the simulation to avoid
2723 exhausting the memory of users having very dynamic amount of
2725 * Bug fix and cosmetics about canceling non-running tasks
2726 * Bug fix about the dot loader's issues when using libcgraph
2729 * Create an installer for windows with nsis (amd64 and win32)
2730 - Add an hello world project to illustrate simgrid project creation.
2731 - Embed libpcre into the Simgrid installer to avoid
2732 its compilation burden
2733 * The raw execution contexts should work on Apple now
2734 * Port to Windows 64 bits
2735 - Sysv contexts now have an implementation for this arch
2736 - GRAS communication features now support this arch
2737 * Drop support for borland compiler on windows
2738 - this code was not maintained, and we kinda depend on gcc nowadays
2739 * Fix portability issues on kfreebsd/gnu: build error about semaphores
2740 * Fix portability issue on unstable ubuntu: linker became picky on
2743 -- Wed Oct 5 15:51:01 CEST 2011 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2745 SimGrid (3.6.1) stable; urgency=low
2747 The "Oops, we broke Macs too" release
2750 * Fixed contexts detection so that raw ones are used when possible
2751 * On Mac, do not use Posix Ucontexts with gcc v4.[1-5] since this
2752 leads to a strange error, with user code segfaulting sometimes when
2753 the generated code is not perfectly aligned (which is not
2754 controllable from the user side, depends on the amount of code)
2757 * New macro: CATCH_ANONYMOUS, which is like CATCH(e) but without argument.
2759 -- Mon Jun 27 13:59:03 CEST 2011 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2761 SimGrid-java (3.6) unstable; urgency=low
2764 * Split of every thing from simgrid v3.5 into a separate package.
2766 -- 2011-10-05 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2768 SimGrid (3.6) stable; urgency=medium
2770 The Summer Release, also known as the "OMG! They Killed Kenny!" version
2773 * Bindings now constitute their own package, separated from the main one.
2774 Rationale: reduce our maintenance nightmare by reducing the module coupling
2775 They will soon be released on their own on gforge.
2777 svn co svn://scm.gforge.inria.fr/svn/simgrid/contrib/trunk/simgrid-java
2778 svn co svn://scm.gforge.inria.fr/svn/simgrid/contrib/trunk/simgrid-ruby
2780 GRAS: It is not considered as stable anymore, but experimental. Sorry.
2781 * It's not quite deprecated for now because we have no replacement,
2782 but it may soon become the case.
2785 * New MPI functions supported: MPI_Comm_disconnect, MPI_Comm_get_name
2786 * Fortran: New user-level cache variable to store the rank of the running
2787 process. This improves performance by an order of magnitude.
2788 * C: New coccinelle script to automatically locate and modify global and
2789 local static variables.
2790 * Improved SMPI network model with a sender-side gap to account for multiple
2794 * New function MSG_comm_get_status(). MSG_comm_test() and MSG_comm_testany()
2795 only say if a communication is finished, no matter whether it succeeded or
2796 failed. You can call MSG_comm_get_status() to know the status of a finished
2798 * New function MSG_task_dsend() to send a task and detach it. When a
2799 communication is detached, you are never notified of its success or failure
2800 and the memory is released automatically once it is finished. This function
2801 is useful when you don't care about the end nor the success of a
2803 * Change the prototypes of action replay. Sorry for inconvenience,
2804 but this is really more efficient this way (and to adapt your code,
2805 you just have to fix the initialization, that shouldn't be too long)
2806 * Kill the braindead MSG_task_refcount_dec() function. I guess nobody
2807 ever managed to do anything useful with it.
2808 * New function MSG_comm_testany(). Similarly to MSG_comm_waitany(), it
2809 takes a dynar of communications. It returns immediately and gives the
2810 index of a finished communication (if any).
2811 * New example: a basic implementation of the Chord P2P algorithm.
2814 * New model for multi-core CPUs. You can now use the core attribute to
2815 precise the number of cores of a host. This is a basic model. Every
2816 process running on the host receives at most the power provided in
2817 the DTD (throughput<=power). Total throughput of process cannot exceed
2819 * New peer tag. This peer tag creates a tiny AS comprising a host and a
2820 router linked by an up-link and a down-link (possibly asymmetrical).
2821 This kind of pattern allows to easily build last-mile model style platforms.
2822 Aggregating such patterns in a rule-based AS is thus the technique of
2823 choice for modeling large peer-to-peer/volunteer computing/cloud platforms.
2824 * New model for Vivaldi routing. We transformed the Vivaldi network model
2825 into a Vivaldi routing model (based on the rule-based model). This allows to
2826 combine Vivaldi based latencies with last-mile platforms.
2829 * Added a check for NaN of IEEE754 infinite in the double entries of
2831 * Introduce a new context factory "raw", highly inspirated from the
2832 ucontext factory, but using manually crafted functions in assembly to
2833 do the work in an efficient manner.
2834 * Allow to change the used context factory at run time, not only at
2835 compilation time. Use --cfg=contexts/factory:raw for maximal speed.
2836 * Add an option --cfg=contexts/stacksize:N to set the stack size of the user
2837 contexts at runtime (only with raw contexts or ucontexts).
2838 * Completely rewrote this module to allow parallel execution of user
2839 processes. Use --cfg=contexts/nthreads:N to execute user processes
2840 with N parallel threads (the default is 1, meaning no parallelism).
2841 * Allow to decide dynamically between sequential and parallel modes.
2842 When nthreads > 1, you can use --cfg=contexts/threshold:P to run the user
2843 processes in parallel only when their number is greater than or equal to P
2845 * Added a check for NaN of IEEE754 infinite in the double entries of
2849 * New command line option: if you pass --cfg=verbose-exit:0, SimGrid
2850 won't output the state of processes when interrupted with Ctrl-C
2851 * Add a new function xbt_dynar_to_array that transforms a dynar into a
2852 NULL-terminated array. This may solve backward compatibility issues
2853 due to the change to return type of SD_simulate. See also:
2854 http://lists.gforge.inria.fr/pipermail/simgrid-user/2010-December/002206.html
2855 * Add new macros with variable number of arguments.
2856 - in xbt/log.h: XBT_DEBUG, XBT_VERB, XBT_INFO, etc.
2857 - in xbt/asserts.h: xbt_assert
2858 - in xbt/cunit.h: xbt_test_{add,fail,assert,log}
2859 - in xbt/ex.h: THROWF and RETHROWF.
2860 Define XBT_USE_DEPRECATED if you want to use the old numbered macros like
2862 * Change xbt_die() to accept a format string with arguments, just like printf.
2863 * New data structure: xbt_lib_t, like a dict but more general and with better
2867 * New configuration options
2868 Options triva/categorized and triva/uncategorized can be used to generate
2869 graph configuration files for Triva visualization tool.
2870 * Configuration option tracing/platform is renamed to tracing/categorized
2871 * XBT logging makes tracing error checks easier, new root log hierarchy: instr
2872 * New TRACE_user_link_variable interface:
2873 User provides the name of the link and the tracing variable to attach to it
2874 * the declaration of tracing categories must be done after the environment
2876 * simpler tracing interface, just one way to declare categories
2877 TRACE_category or TRACE_category_with_color, it is up to you
2878 * links in the trace file are again identified by their names
2879 * trace contains the full platform hierarchy exactly as declared using the ASes
2880 * Options tracing/msg/[task|process]:1 groups the process by hosts
2881 for both cases, tasks and processes must have names that are unique during the simulation
2882 these options generate traces that are suited to gantt-charts, such as the space-time view of Paje
2883 * The experimental option tracing/msg/volume is deprecated
2884 its functionality may be reincorporated if needed
2886 The tracing generates a trace file with unordered timestamped events,
2887 because of the way the core simulator (surf) works. A script available
2888 at the tools directory (fix-paje-trace.sh) can be used to put the events
2889 in order. We have changed the tracing so it can generate ordered timestamped
2890 events in the final trace, but depending on the simulator (and how much time
2891 is simulated) that can lead to a huge memory utilization. It is deactivated
2892 by default, but it can be activated using the --cfg=tracing/buffer:1 switch.
2894 Build Infrastructure
2895 * Define a SIMGRID_VERSION macro in simgrid_config.h.
2896 - We are trying hard to keep the API stable, but it may happen that
2897 some things change (we're a research project after all, not a
2898 nuclear plant operating system). If such things should happen, you
2899 could rely on that macro to adapt.
2900 - current value: 30600 for 3.06.00, aka 3.6
2901 * Define macro MAKE_SIMGRID_VERSION(major, minor, patch) to help building
2902 a number that can be compared with SIMGRID_VERSION.
2903 * Add a build option -Denable_debug (set to ON by default): when set to OFF,
2904 assertions and verbose/debug logging events are disabled at compile time.
2906 -- Tue Jun 21 08:57:43 CEST 2011 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
2908 SimGrid (3.5) stable; urgency=medium
2911 * New feature to any SimGrid-based simulator: Model-Checking
2912 Check SIN#1 for more details.
2915 * New Model SMPI (three-interval linear regression for correction factors)
2916 See RR-7426, available at http://hal.inria.fr/inria-00527150
2917 * Ability to use FORTRAN MPI code (through f2c, automatically privatized)
2918 * New MPI functions supported: MPI_Get_count(), MPI_Comm_split()
2919 * New: RAM folding (see RR-7426 and examples/smpi/NAS/DT-folding)
2920 * New: execution sampling (see RR-7426 and examples/smpi/NAS/EP-sampling)
2921 * See also src/smpi/README
2926 - Tracing API changes: TRACE_start and TRACE_end should not be called
2927 by user-code. They are automatically called by simulators created
2928 with SimDAG, MSG and SMPI if the toolkit is compiled with
2929 tracing_enabled=ON. Categories declaration and utilization remain the
2930 same for MSG and SimDag.
2931 - A function was added to the tracing API to declare categories with
2933 - TRACE_category_with_color (char *category, char *color)
2934 where color must be in the following format
2935 "%f %f %f", red, green, blue
2936 and red, green, blue are float values in the interval [0, 1]
2937 - User can specify NULL as color parameter, or continue calling
2938 TRACE_category (cat)
2939 On that case, the tracing system will define random colors
2940 - The following command-line options are supported:
2941 --cfg=tracing/filename:msg.trace
2942 --cfg=tracing:1 (activate tracing, needed to use others)
2943 --cfg=tracing/platform:1 (categorized resource use)
2944 --cfg=tracing/uncategorized:1 (uncategorized resource use)
2945 --cfg=tracing/msg/task:1 (task creation)
2946 --cfg=tracing/msg/process:1 (process creation, migration)
2947 --cfg=tracing/msg/volume:1 (volume of MSG send/recv)
2948 --cfg=tracing/smpi:1 (SMPI interface tracing)
2949 --cfg=tracing/simdag:1 (allow SimDAG tasks receive categories)
2950 - examples of examples/msg/tracing updated
2952 - DAXLoader and DOTLoader functions can generate tasks with categories
2953 - A new function to attribute a category to SD tasks:
2954 TRACE_sd_set_task_category (SD_task_t task, char *category)
2955 * Tracing the MPI interface implemented by SMPI
2956 - Collective operations are traced with states
2957 - Point-to-Point operations are traced with states/links
2958 - Tracing activated by a parameter "-trace filename" passed
2959 to smpirun during execution (considering that simgrid
2960 is compiled with tracing enabled)
2961 - To run the simulation with gdb, the simulator
2962 accepts --cfg=tracing/smpi:1 to trace SMPI
2963 - tesh files to check if smpi tracing is ok
2964 - See examples/smpi/NAS/DT-trace
2965 * GTNetS tracing re-worked
2966 - adaptation to the tracing system of GTNets to cope
2967 with modifications regarding the fullduplex mode
2968 - new tesh files to check if gtnets tracing is ok
2971 * Asynchronous communications through the functions:
2972 MSG_task_isend/irecv and MSG_comm_test/wait/waitall
2973 * New function: MSG_load_platform_script()
2974 to make possible using a lua script instead of XML files to set up platforms
2975 * New function: MSG_set_function
2976 to associate functions to processes, used when bypassing the parser
2977 * New functions: MSG_task_set_name(), MSG_task_set_compute_duration()
2979 Platforms: Add some more examples in examples/platforms
2980 * Grid'5000: see www.grid5000.fr
2981 * *_30000_hosts.xml: various huge files [mainly scalability testing]
2984 * Change the XML format. This is a very important modification. SimGrid
2985 3.5 introduces a new hierarchical format based on the notion of
2986 Autonomous Systems. Compatibility with old format is ensured
2987 through the perl script provided in the install bin directory
2988 bin/simgrid_update_xml.
2989 It is now possible to build platforms with specific routing
2990 mechanism (Full/Dijkstra/DijkstraCache/Floyd) and to easily
2991 connect several platforms together. We will try to provide soon
2992 set of realistic platforms exploiting these properties (have a
2993 look at examples/platforms/ for the moment).
2994 * Take the opportunity of the XML format change to be a good XML citizen:
2995 rename link:ctn to link_ctn and similar changes (also dealt with by
2997 * Add a new routing scheme (rule-based) using regular expressions. It
2998 enables to have an extremely low memory footprint when the
2999 underlying routing is simple and can be compactly described. You
3000 need to have libpcre4-dev (perl regular expressions) installed if
3001 you want to use this routing scheme.
3002 * Revive the cluster TAG and allow to easily and efficiently (both in
3003 term of memory and speed) connect clusters together. Have a look
3004 at teshsuite/simdag/platforms/ to see how this can be done. With
3005 this tag, you can create clusters with thousands of tasks at no
3006 cost (have a look at examples/platforms/).
3007 Note: clusters are implemented as ASes, so there is no need for an
3008 enclosing AS tag if you have only one cluster in your platform.
3009 * Add new generic functions in the public interface that allows the user
3010 to call SURF 'create_resource' methods from your code (same
3011 functionality as the XML bypass mechanism but with a much lighter
3013 * Add a new model (enabled through command line --cfg=network/model:SMPI)
3014 that uses a piecewise linear approximation to produce better
3015 results when exchanging small messages.
3016 * Add a new parameter to handle correctly full duplex link and account
3017 for interferences between uplink and downlink communications
3018 (activate with --cfg=fullduplex:1).
3021 * Rename the SD_READY (all dependencies are satisfied and task is
3022 scheduled) state in SD_RUNNABLE and define a new SD_SCHEDULABLE (all
3023 dependencies are satisfied) state.
3024 This prevents a confusion between the notion of "ready to schedule"
3025 (SD_SCHEDULABLE) used in DAG scheduling and that of "ready to be
3026 simulated" (SD_RUNNABLE) used by the simulation kernel.
3027 * Change the way a task is considered as ready. Instead of removing
3028 dependencies when a task is done, a counter is decreased. This way,
3029 it is always possible to reach ancestors thanks to the
3030 SD_taks_get_parents function (even after the end of the simulation.)
3031 * Change the return type of SD_Simulate from (SD_task_t*) into
3032 xbt_dynar_t. This function was in handling a dynar internally and
3033 converted it into a NULL terminated array for historical reasons.
3034 * New function SD_dotload(char*) to load a DAG described in dot
3035 format. This loader and the corresponding examples require the
3036 installation of the graphviz library.
3037 * Fix a bug in the management of tasks of size 0 in the surf network
3038 models. This problem was only visible with SIMDAG and you should
3039 thus disregard results produced with earlier versions if you
3040 relied on this feature (some tasks were blocked because of this).
3041 * Fix a bunch of stuff that prevented to use classical models with SIMDAG
3042 even though your applications were doing only point-to-point
3043 communications and sequential computations. Now you can really use any
3044 model you want (of course, if you create real parallel tasks, which are
3045 not implemented in most models beside ptaskL07, this will abort).
3046 * Add an example that schedules a DAX on an heterogeneous platform
3047 using a Min-Min strategy.
3048 * New function SD_workstation_get_current_task() that returns the kind
3049 of task currently running on a workstation in the sequential access
3051 * Raise some warnings when unexecuted tasks remains at the end of the
3052 simulation. This is usually caused by cycles in the DAG.
3055 * New function: SIMIX_process_set_function() called by MSG_set_function
3056 * Change the underlying waiting queue in semaphores so that a process
3057 can wait on several of them simultaneously (as in waitany).
3058 * Fix the way to handle tokens in semaphores so that all access patterns
3059 work: {acquire, acquire_timeout, waitany} / {release, release_forever}.
3060 * kill the dirty pimple SIMIX_message_sizes_output()
3061 Please use (proper) visualization instead
3064 * New data container: setset (set of sets of elements)
3065 * New module: mmalloc (mapped malloc, allowing to have several
3066 independent segments of malloc)
3067 * New function: xbt_dict_cursor_set_data()
3068 * New functions: xbt_dynar_sort(), xbt_dynar_compare()
3069 * New function: xbt_dynar_is_empty()
3070 * New function: xbt_fifo_get_last_item()
3071 * Fix xbt_dynar_shrink(): use the right element size.
3072 * Fix xbt_dynar_set*(): allow index larger than current size and memset 0
3073 uninitialized areas during expand.
3074 * Fix semaphores: previous implementation was severely broken.
3075 * Use library init/fini functions for our initialization.
3076 - you can use logs and other feature as soon as you want in your
3077 code (even before the xbt_init / MSG_init)
3078 - xbt_exit is now a no-op and produce a warning when used.
3081 * Port GRAS to new SIMIX mechanisms. This allows gras users to
3082 benefit from the latest improvement to the simulation kernel.
3083 * Kill measurement sockets for now. If you rely on them, sorry. This
3084 release is not for you. This feature will be reintroduced in the
3085 future, but we cannot delay the release any further.
3086 * New function: gras_msgtype_get_name().
3087 * Implement gras_agent_spawn in RL too (the prototype changed a bit)
3088 * Fix (at last) the pmm example: it should not randomly fail anymore.
3090 Build chain: bug fixes and overall polishing
3091 * Cmake is now stable enough. Hence, we killed the autotools.
3092 * Port to windows ( TM :)
3093 * Fix the 'make install' target.
3094 No need to use 'make install-simgrid' anymore
3095 * Introduce a 'make dist' target compiling a *source* archive
3096 'make package' compiles a binary archive
3097 * Compile java files only on need
3098 * Add --cd and --setenv command line options to tesh
3099 * Out of source builds are not fully supported yet, but we are close
3100 * Enable supernovae and optimization flags by default for our users
3103 * Add layer to set up environment directly from lua, without XML.
3104 * The effect of gras_stub_generator can be achieved through
3105 lua too (check examples/gras/console/ping_generator.lua)
3107 -- Wed, 01 Dec 2010 22:09:23 +0100 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
3109 SimGrid (3.4.1) stable; urgency=low
3111 The "Polishing easter eggs is probably a good idea" release.
3112 This is a bug fixes release only.
3116 * Fix a bug preventing the tasks from begin garbage collected.
3119 * Fix a bug occurring when a host involved in a communication fails.
3120 This was not detected properly by the other peer involved in the
3121 communication. Now, it's reported as a network error.
3124 * Warn the user about loop dependencies in data flow of DAX files
3125 * Obey the control-flow dependencies of DAX files
3128 * Add option "enable_smpi" allowing to not compile SMPI.
3129 Probably useful for the (Mac) users experiencing a build error here
3130 * Improve the detection of lua5.1 and ruby1.8
3132 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Tus, 04 May 2010 28 16:11:16 +0100
3134 SimGrid (3.4) stable; urgency=low
3136 The "Easter in Cargese" release. Also known as (major changes):
3138 * the "se habla Java, Ruby 話せます, fala-se Lua (and deaf-friendly)"
3139 ~> bindings were greatly improved
3140 ~> new tracing infrastructure for better visualization introduced
3142 * the "Welcome to configury modernity" release.
3143 ~> we switched from autotools to cmake, and improved our cdash
3146 A more detailled list of changes follow (full detail in svn log).
3148 Java Bindings: Various Cleanups
3149 * (install java-gcj-compat-dev on debian-like to use them)
3150 * Remove put/get: no need to export deprecated interface in Java
3151 Use send/receive instead.
3152 * Cleanup the examples and add a README per directory
3153 * Remove example autoDestination (that's the only way to go now)
3154 * Remove example explicitDestination (was a plain copy of basic)
3155 * Make JniException a runtime exception, so that there is no need to
3156 declare the fact that you may encounter such a beast. I guess that
3157 nobody will ever want to survive such error.
3158 * Create specific errors for each MSG case of failure:
3159 host failure, transfer failure, timeout, task cancelled
3160 * Cleanup the exceptions that may get thrown by each function
3161 * Other internal cleanups in Java bindings. Performance still bad :/
3162 Ruby and Lua Bindings: create them
3163 * (install ruby1.8-dev/liblua5.1-0-dev on debian-like to use them)
3164 * That's new and great, you should try them out.
3165 Same functionalities than Java bindings, only even less polished
3167 * Kill the useless "rate" argument of SD_task_get_execution_time()
3168 Everyone used to provide -1 as a value, it was not used, and the
3169 semantic of a possible use wasn't even clear.
3170 * SD_SCHED_NO_COST: Constant to use as cost in SD_task_schedule()
3171 either as comm costs or compute costs to mean that there is no
3172 such thing for that specific task.
3173 * Add a SD_task_set_name() function
3174 * Fix SD_task_unschedule() on typed tasks
3175 * Fix SD_task_get_execution_time() to return seconds, not flop*sec
3176 * In DAX loader, accept useless 'level' attributes to <job> since
3177 LIGO DAGs have them (seem to be to ease graphical representation).
3179 * Add an example masterslave_mailbox.c using send/receive and not
3180 the deprecated put/get interface.
3181 * Kill the MSG_paje_output() function. It's a noop since 2 years.
3182 * Kill MSG_WARNING and MSG_FATAL return codes: they were not used
3184 * Rename MSG_TIMEOUT_FAILURE into MSG_TIMEOUT for sake of logic
3185 (declare MSG_USE_DEPRECATED to still have the old name)
3186 * Add a MSG_task_set_data() function
3187 * About trace replay (see examples/msg/actions):
3189 - Allow to work with splitted trace files for each process
3190 Give the specific trace file as argument of each process,
3191 and call MSG_action_trace_run(NULL)
3192 You can still have one merged file for all processes.
3193 - Fix implementation of collective operations
3194 * Allow task_execute() on 0-sized tasks (closes #10063)
3196 * This is the first release of SimGrid where SMPI is not considered
3197 beta anymore (even if some corners should still be improved)
3198 * Port over the new SIMIX_network submodule (internal refactoring)
3199 * Basic support to log events as with SMPE (use --cfg=SMPE:1)
3200 * Implement more missing elements of the standard:
3202 - MPI_MAXLOC MPI_MINLOC + all associated datatype MPI_DOUBLE_INT,
3204 - MPI_Address() MPI_Get_count() MPI_Type_free() MPI_Type_extent()
3205 MPI_Scan() MPI_Get_processor_name()
3206 - Added implementation of missing case for Alltoall (warning: it's
3207 *not* the bruck variant from OpenMPI; based on Alltoallv instead)
3208 - SMPI_MPI_Gather() SMPI_MPI_Gatherv() SMPI_MPI_Scatterv()
3209 SMPI_MPI_Reduce_scatter() SMPI_MPI_Allgather()
3210 SMPI_MPI_Allgatherv()
3211 * Bug fixes include:
3212 - MPI_Waitsome() was broken
3213 - Allow relative includes in smpicc
3214 - Command line cfg argument 'reference_speed' was ignored...
3215 - Some functions did not properly lead to auto-benching of user code
3216 - smpicc passes -O2 by default (just like openmpi one)
3218 * add SIMIX_action_suspend() and SIMIX_action_resume() functions
3219 * Bug fixes about timeouts during communications
3220 * add SIMIX_message_sizes_output() as a pimple to write to file the
3221 amount of messages per size. Use gnuplot to get histogram.
3222 Pimple because that's the only user-visible function of simix,
3223 defined directly in xbt.h (irk, sorry)
3225 - Add a SIMIX_sem_get_capacity() function
3226 - Fix interactions with processe resume/suspende
3227 - release_forever() was stupidly broken
3228 - Fix SIMIX_display_process_status() for processes in a semaphore
3229 - Make SIMIX_sem_block_onto() user-visible
3230 * Refactoring context stuff:
3231 - Use pseudo-OOP for better modularity
3232 - reimplement SIMIX_process_kill() without process_schedule() so
3233 that the latter can take as invariant that it is called from
3235 - Merge context_start into context_new for sake of simplicity
3237 * Add a Vivaldi network model, coded live during SUD'10 ;)
3238 * Rename configuration variables to start a hierarchy:
3239 o cpu_model -> cpu/model
3240 o network_model -> network/model
3241 o workstation_model -> workstation/model
3242 * New configuration variables:
3243 o network/bandwidth_factor: correction to bandwidth
3244 o network/latency_factor: correction to latency
3245 o netwotk/weight_S: correction to the weight of competing streams
3246 * Add a long description to the models, that users can see with such
3247 argument on the command line: --cfg=cpu/model:help
3248 * --help-models display the long description of all known models
3250 * config: add the ability to set a default value after registration
3251 Does not override any previously set value (e.g. from cmd line)
3252 * dict: allow to have integer key and data.
3253 When so, you need to use the following functions
3254 void xbt_dicti_set(xbt_dict_t dict, uintptr_t key, uintptr_t data);
3255 uintptr_t xbt_dicti_get(xbt_dict_t dict, uintptr_t key);
3256 void xbt_dicti_remove(xbt_dict_t dict, uintptr_t key);
3257 In contrary to regular dicts, the key is not malloced before copy.
3258 Mixing scalar and regular elements in the same dict is not tested
3260 * Allow to use xbt_dynar_shrink() to expend the dynar instead
3261 Tracing for Visualization:
3262 * SimGrid is now instrumented in order to generate a trace file for
3263 visualization analysis: to use it, need to compile SimGrid with the
3264 "tracing" option enabled, and instrument the program using SimGrid with
3265 TRACE_start, TRACE_category, TRACE_msg_set_task_category and TRACE_end
3266 (among other functions).
3267 * The instrumentation only traces the platform utilization for now
3268 * Documentation to use the tracing functions and how to analyze the
3269 traces with the Triva tool is written.
3270 * More information about: SimGrid FAQ (in the section Tracing Simulations
3273 * We moved to cmake as default build system. Autotools support will
3274 be dropped soon. Check the FAQ for more info about how to use it.
3275 * Greatly improved our cdash/ctest interactions
3276 Check http://cdash.inria.fr/CDash/index.php?project=Simgrid
3277 * Added memory checking tests with valgrind; lot of memleak fixing.
3278 This may be the first release of simgrid with so few memory issues
3279 * Added code coverage tests.
3280 Our coverage is still improvable, but at least we see it on cdash.
3282 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Wed, 28 Apr 2010 28 17:11:16 +0100
3284 SimGrid (3.3.4) stable; urgency=low
3286 The "Desktop Grid needs love too" release (also called Xmas release).
3288 Models improvements:
3289 * Major speedup in the maxmin system solving by using lazy evaluation
3290 Instead of solving completely the maxmin system at each iteration,
3291 only invalidate (and recompute) the modified parts.
3292 This new feature is enabled in default models but you can try to
3293 turn it on with "--cfg:maxmin-selective-update=1" for other models.
3294 * Cas01 IMproved as default CPU model
3295 This CPU model is the same Cas01 model, but it uses the
3296 maxmin-selective-update flag and a heap structure to manage
3297 actions on SURF kernel.
3298 It reduces the complexity to find the next action to finish and,
3299 consequently, it's faster than the old Cas01.
3300 This is the new default CPU model (Cas01).
3301 * Rename the old Cas01 model to Cas01_fullupdate
3302 Keep the old cpu model Cas01 with the new name of Cas01_fullupdate.
3303 Use "--cfg=cpu_model:Cas01_fullupdate" to use the old default CPU model.
3304 * CpuTI (CPU Trace Integration)
3305 A new CPU model whose objective is simulate faster when using
3306 availability trace files.
3307 Instead of using a full featured, over engineered maxmin system for
3308 CPU modeling, this model does the pre-integration of traces files
3309 to calculate the amount of CPU power available, and so, executes
3310 faster than the old CPU models.
3311 Use "--cfg=cpu_model:CpuTI" to change to this CPU model.
3312 * Use LV08 as default network model since it gives better accuracy
3313 for small messages and shouldn't change things for big ones.
3314 Use --cfg=network_model:CM02 to get the previous behavior.
3317 ******************************************
3318 *DO NOT MIX 3.3.4 RESULTS WITH OLDER ONES*
3319 ******************************************
3320 * The new CPU model may changes simulations!
3321 The point is that events occurring at the exact same timestamp
3322 are not scheduled in the same order with the old and new
3323 version. This may be enough to completely change the execution
3324 of simulations in some cases.
3325 * The new network model will change simulations!
3326 This new model is more realistic than the previous one, so you
3327 should consider redoing your old experiments with this model.
3328 Sorry for the inconvenience.
3331 * Introduce the supernovae compilation mode
3332 When compiled that way, the whole SimGrid (or almost) is put in a
3333 single compilation unit and compiled in one shoot.
3334 This is to help gcc which has difficulties to inline stuff from one
3336 The speedup seem to be above 15%, althrough more tests are needed on
3337 amd64 to confirm that gain.
3340 * Port of MSG's mailbox on top of SIMIX network
3341 The put/get mechanism was greatly simplified on the way.
3344 * New SIMIX network module. Provides:
3345 - Mailbox: rendez-vous mechanism to find with who you want to speak
3346 - Synchronous send/recv: easier and hopefully faster since the
3347 logic is handled in the maestro process directly now
3348 - Asynchronous send/recv: you dreamt of it? It's here now
3349 Too bad that nobody cared enough to propagate the change to MSG.
3350 * Add semaphores as SIMIX synchronization mechanism.
3353 * new function SD_daxload(char*) to load a DAX file
3354 (see http://vtcpc.isi.edu/pegasus/index.php/WorkflowGenerator)
3355 * Introduce typed tasks. Specify its kind and cost at creation.
3356 At scheduling, just give where it should be placed, and the cost
3357 for each involved resource is automatically computed.
3358 Existing constructors so far (more to come of course):
3359 - SD_task_create_comm_e2e() for end-to-end communication
3360 - SD_task_create_comp_seq() for sequential computation
3361 Use SD_task_schedulev() / SD_task_schedulel() to schedule them.
3362 * new function SD_task_dump() for debugging display
3363 * new function SD_task_dotty(task,FILE*) writing to file the info
3364 about the task in dotty format
3365 * SD_task_dependency_exists() can now cope with having one of its
3366 arguments NULL. If so, it tests whether the other argument has any
3368 * Add getters on list of preceding/following tasks:
3369 SD_task_get_parents(task) and SD_task_get_children(task)
3370 * Add getters on amount of workstations and list:
3371 SD_task_get_workstation_count(t) and SD_task_get_workstation_list(t)
3372 * Add getter on task kind: SD_task_get_kind(task)
3373 * Update the start_time and finish_time of tasks on completion/failure
3374 * Bugfix: Remove task from state swags when destroyed
3377 * New function: void gras_cpu_burn(double flops) -- a simple CPU burner
3380 * New function: xbt_dynar_dopar(dynar,fun) to map a function over the
3381 dynar with one separate thread per value of the dynar.
3382 * Change the prototype of xbt_thread_create(), sorry.
3383 Added a boolean parameter indicating whether we want to join this
3384 thread (used in SG only for now)
3385 * Implement xbt_thread_join and xbt_thread_yield in SG also.
3388 * GTNetS wrappers should now be usable again (and betterly tested too)
3389 * Fix a major regression from 3.2 where the timeout provided to
3390 MSG_task_put_with_timeout() was used as absolute time before which
3391 the comm should be done.
3392 * Start to fix the <cluster> tag.
3393 - Internal links should be good now (beside of the loopback, which
3394 use the private link instead)
3395 - paths to the external world is still rather broken
3396 - the <route:multi> tag is just broken. Actually that's brain-dead.
3397 We need sth like <route:multi src="myCluster" dst="$*-${myCluster}">
3398 to make it less stupid
3399 ** Check your platform with teshsuite/simdag/platforms/flatifier **
3400 * Fix a source-level compatibility glitch from 3.2: after defining
3401 MSG_USE_DEPRECATED, you can use the old name
3402 MSG_task_put_with_time_out() for MSG_task_put_with_timeout()
3403 * Allow to compile from the SVN with automake 1.11
3404 * Fix some problems when using the "start_time" tag in deployment XMLs.
3405 * Fix #8569: XBT/synchro.h has redundant declarations
3406 * Fix #8563: MSG return values and exceptions
3407 Introduce a MSG_TIMEOUT_FAILURE return code and use it consistently.
3408 * Integrate patch #8636: Obey DESTDIR when installing documentation.
3409 Thanks to Robson Peixoto.
3410 * Fix a vicious bug in dictionaries inducing that some elements were
3411 not freed on xbt_dict_free()
3413 Portability report of this version:
3414 * Main portability targets:
3415 - linux (ubuntu (804/810/910) /debian (4/5/testing) /fedora (core11))
3416 on (amd64/i386/ia64)
3417 - mac leopard on i386
3418 Known problems: http://cdash.inria.fr/CDash/index.php?project=Simgrid
3419 but nothing critical.
3420 * Other platforms: windows, AIX and others were not tested for this release
3422 Timing report of this version:
3423 * Lazy evaluation brings arbitrary speedup (ie, speedup depending on
3424 scenario parameters). From 8h to a few seconds in desktop grid settings.
3425 * Supernovae brings about 25% speedup on i386.
3427 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Thu, 24 Dec 2009 19:07:39 +0100
3429 SimGrid (3.3.3) stable; urgency=low
3431 The "Need for Speed" release.
3433 The timings done to validate the 3.3.2 were faulty.
3434 Instead of being 5% faster, it was 15% slower (compared to 3.3.1).
3436 The problem was a conversion from a manually handled vector to
3437 xbt_dynar_t on the critical path.
3438 xbt_dynar_foreach calls functions, inducing stack management crap.
3440 We inlined these functions and xbt_dynar_foreach is now breath taking.
3441 We also inlined xbt_swag_belong on the way.
3443 Here are some approximate speedup measurements (on master/slaves
3444 simulations lasting between 10s and 20s each):
3445 3.3.1 -> 3.3.2: about same performance
3446 3.3.2 -> 3.3.3: 40% speedup
3447 3.3.1 -> 3.3.3: 40% speedup
3448 3.3.1 with inline patch -> 3.3.3: 30% speedup
3450 Our reading is that the refactoring which occurred in 3.3.2 made us
3451 suffer much more from the xbt_dynar_foreach low performance, but
3452 once we solved this, this refactoring proved to be very performance
3453 effective. From the 40% speedup, somehow, 10% are due to the
3454 inlining and 30% to the refactoring.
3456 That's a pitty that gcc cannot inline functions placed in other files
3457 alone. We have to choose between:
3458 - break the encapsulation (by putting private data structures and
3459 accessors in headers files to help gcc)
3460 - live with low performance
3461 - switch to a decent compiler such as icc (not quite possible).
3463 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Thu, 20 Aug 2009 21:21:33 +0200
3465 SimGrid (3.3.2) stable; urgency=low
3467 The "Simplicity does not preceed complexity, but follows it" release.
3469 The main contributors of this release were (lexical order):
3470 Silas De Munck, Stéphane Genaud, Martin Quinson, Cristian Rosa.
3473 * Extract the routing logic into its own object.
3474 (was dupplicated in network.c and workstation_LV07.c;
3475 Allows to implement other ways of storing that info)
3476 => kill now useless network_card concept
3477 - Use dynar to represent routes (instead of void** + int*)
3478 - kill link_set (use surf_network_model->resource_set instead)
3479 - Add a command-line option to choose the routing schema to use
3480 - Add three new models:
3481 * Floyd (shortest path computed at initialization)
3482 * Dijikstra (shortest path recomputed all the time)
3483 * Cached Dijikstra (shortest path computed on need)
3484 All these models where contributed by Silas De Munck, and are
3485 described in his ICCS09 paper.
3487 * Simplify model declaration
3488 (less redirections, less function to write when defining a model)
3489 - Factorize stuff between models:
3492 surf_model_resource_set(model)
3493 surf_model_resource_by_name(model, name)
3494 - Unify the types of models in s_surf_model_t (using an union)
3495 - Embeed fields of common_public directly into s_surf_model_t
3496 - Rename model methods:
3497 action_free ~> action_unref
3498 action_change_state ~> action_state_set
3499 action_get_state ~> action_state_get
3500 - Change model methods into functions:
3501 (model)->common_public->action_use ~> surf_action_ref
3503 * Implement a generic resource; use it as ancestor to specific ones
3504 (allows to kill duplicated code in models)
3505 Drawback: timer command don't need no name nor properties;
3506 workstation_CLM03 don't need no properties
3507 (but I guess we can live with those few bytes wasted)
3509 * Improve the action object model
3510 - implement a constructor avoiding dupplicated code about field
3511 initialization in generic_action part.
3513 * Kill the SDP model: it has an external dependency, is deprecated
3514 in flavor of modern lmm models, and didn't compile since a while
3517 * Relocation of the context module from XBT to SIMIX.
3518 (the context were decoupled from the simix processes, duplicating a lot of code)
3519 => a lot of code was factorized
3520 - less overhead is introduced during scheduling
3521 - simpler API for the context factory
3522 - the logic for process creation,destruction and manipulation was simplified
3523 * Simplification of the s_smx_process_t data structure.
3524 => accesing the simix level data associated to a process is faster now,
3525 and the code is a lot more readable.
3528 * Implement some more MPI primitives:
3529 MPI_Bcast, MPI_Waitany, MPI_Waitall, MPI_Reduce, MPI_Allreduce, MPI_Scatter, MPI_Sendrecv, MPI_Alltoall
3530 -implementation: Bcast: flat or 2-ary tree (default),
3531 Barrier: 4-ary tree,
3533 Allreduce: Reduce then Bcast
3534 Alltoall: "basic_linear" if data per proc < 3Kb, "otherwise pairwise".
3535 Not yet implemented: "Bruck" for data per proc < 200b and comm size > 12
3536 Alltoallv: flat tree, like ompi
3538 * Add support for optimized collectives (Bcast is now binomial by default)
3539 * Port smpirun and smpicc to OS X
3542 * Kill SD_link_get_properties: hard to maintain and makes very little sense
3543 Shout out if you used it.
3546 * Display the list of still queued messages in SG mode when existing
3550 * Add xbt_set_get_by_name_or_null() [Silas De Munck]
3551 * Add xbt_graph_node_get_outedges() [Silas De Munck]
3552 * Add xbt_str_from_file(FILE*)
3553 * Add xbt_dict_get_key achieving a linear reverse search
3554 * Remove the context module
3556 Portability report of this version:
3557 * Main portability targets:
3558 - Linux(debian)/x86/context
3559 - Linux(debian)/x86/pthreads
3560 - Linux(debian)/amd64/context
3561 - Linux(debian)/amd64/pthreads
3562 On these, we still have the eratic breakages of gras/pmm and
3563 amok/saturate_sg reported in previous version. We still think
3564 that the tests are the cause of the fault, not the tested code.
3566 - Mac OSX Leopard/x86/context
3567 Still false negative in tesh autotesting.
3568 Smpi still fails, but this time because readlink does not accept -f
3569 Everything seems to work properly beside of that.
3572 - AIX version 5.3 (only tested contexts this time)
3573 Smpi still fails there because mktemp is not installed.
3574 Everything seems to work properly beside of that.
3576 I managed to compile it for the first time, but several breakages.
3577 Won't delay the release for this exotic platform.
3579 * Windows: it's still lagging behind. If you want to help, please
3582 Timing report of this version:
3583 This version seem to be more than 5% faster than 3.3.1 (on linux
3584 64bits with contextes). The gain is less than expected, we are
3585 investigating this for next release.
3587 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Wed, 19 Aug 2009 17:07:12 +0200
3589 SimGrid (3.3.1) stable; urgency=low
3592 * Implement a --cfg-help to show existing configuration variables
3593 * Build chain do not require doxygen in maintainer mode
3596 * fix a bug on struct sizeof computation, which prevented the
3597 exchange of arrays of structs in some conditions
3598 - added a regression test about this in datadesc_usage
3599 * Allow the exchange of 0-long dynamic vectors.
3600 - for that, use -1 as indicator of dynamic size instead of 0
3601 - This implied to change any size from unsigned long to long,
3602 reducing a bit communication abilities, but I guess that with
3603 64bits being quite common, this is more than enough.
3604 - This also induce a protocol change, thus bumping network protocol
3605 version from 0 to 1 (if we have external users, we have to get
3606 clean on that point too ;)
3607 - added two regression tests about this in datadesc_usage
3608 * Be more verbose when propagating local exceptions
3609 This helps debugging.
3610 * Display the status of simulated processes when receiving SIGINT in
3614 * Allow to control the simulation from a trace file.
3615 New functions MSG_action_register() and MSG_action_trace_run()
3616 The first one allows to associate a function execution to each
3617 kind of action while the second one parses a trace file and
3618 triggers the corresponding actions within the system.
3619 For now, only a toy example is provided in examples/msg/actions
3620 * Add an example of process migration in examples/msg/migration
3621 * Fix a bug in task exchange which broke MSG_task_get_sender()
3622 Add a teshsuite regression test for that.
3623 [Bug: if MSG_task_get_sender() is called after sender exit,
3625 * Fix a bug which prevented suspend/resume to work properly
3626 * Display the status of simulated processes when receiving SIGINT
3627 This fixes a regression of v3.3. due to the introduction of SIMIX
3628 * Bug fixing in failure management:
3629 - trace could not start by a failure at time 0
3630 - failure during communications were not working
3633 * Add SIMIX_process_set_name() to change the name of the current
3634 process in the log messages.
3635 * Store smx_hosts in a dict since we only retrieve them by name
3636 * Move the configuration infrastructure to surf
3639 * Move the configuration infrastructure to surf
3642 * Massive internal cleanups:
3643 - Store internal structures on processes instead of hosts (allows
3644 to have more than one process per host, in addition of being more
3646 - Cleanup the initialization/finalization process
3647 - Kill a whole bunch of unneeded synchronization:
3648 processes run in exclusive manner within the simulator
3649 - Move queues from global tables to process data fields
3651 - now accept -platform and -hostfile arguments
3652 - Pass the right rank value to processes according to the hostfile
3653 * Compile the examples by default, and use them as regression tests
3654 * Implement MPI_Wtime()
3655 * Change the reference speed to a command line option
3658 * TCP_gamma can now be specified as command line option using
3659 --cfg=TCP_gamma:10000000.0
3660 * Change the --surf-path cmd line option into --cfg=path:
3663 * Also include strbuff from xbt.h public header
3664 * xbt_ex_display(): do not free the exception after displaying
3665 This allows to do more with the given exception afterward.
3666 Users should call xbt_ex_free() themselves.
3670 Portability report of this version:
3671 * Main portability targets:
3672 - Linux(debian)/x86/context
3673 - Linux(debian)/x86/pthreads
3674 - Linux(debian)/amd64/context
3675 - Linux(debian)/amd64/pthreads
3676 These targets fail about 1/10 of times on gras/pmm, but we believe
3677 that this is because of the test, not because of simgrid.
3678 amok/saturate_sg fails even more rarely, and the test may not be
3681 - Mac OSX Leopard/x86/context
3682 The test suite still spits tons of errors because some obscure
3683 force prevents us from removing the temporary directories
3684 arguing that they still contain some metadata I've never heard of.
3685 Smpi fails because seq is not installed.
3686 Everything seems to work properly beside of that.
3689 - AIX version 5.3 (both contexts and pthread)
3690 Smpi still fails there because mktemp is not installed.
3691 XML inclusions seems rosty on AIX.
3693 * Windows: it's still lagging behind. If you want to help, please
3696 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Sat, 27 Jun 2009 00:14:30 +0200
3698 SimGrid (3.3) stable; urgency=high
3702 * JAVA BINDINGS for MSG (you dreamt of them? We made them)
3703 [Malek Cherier & Mt]
3705 * Introduce the SIMIX module: factorize code between MSG and GRAS.
3708 Until now, GRAS were using MSG as an interface to SURF. It was
3709 quite difficult because both interface have several differences
3710 (MSG channels vs GRAS sockets were the most notable point).
3712 This also opens the gate to SMPI (which should occur soon) and speed
3713 up simulations by to 40% (even if it were not the main goal).
3715 **************************************
3716 *DO NOT MIX 3.2 RESULTS WITH 3.3 ONES* Simix may changes simulations!
3717 **************************************
3718 The point is that events occurring at the exact same timestamp are
3719 not scheduled in the same order with the old and new version. This
3720 may be enough to completely change the execution of simulations in
3721 some cases. Sorry for the inconvenience.
3723 * Cleanup and upgrade the XML format to push further scalability
3724 issues (check http://hal.inria.fr/inria-00256883/ for more info)
3726 * Improve the testing infrastructure with tesh. Now a very large part of
3727 the code is tested not only by being run but also by checking that the
3728 output match an expected output [Mt].
3730 * Move on to FleXML v1.7 for the embeeded XML parsers. This version
3731 is really less memory-demanding, which should allow you to use
3732 larger files in SimGrid [AL].
3734 * Inform valgrind about our contextes, so that it becomes usable
3735 with the default (and more effecient) version of SimGrid
3736 [contributed by Sékou Diakite, many thanks]
3739 * Introduce a listener thread in charge of receiving incoming
3740 messages from the network. It allows to overlap communication and
3741 computation but most notably, it removes some stupid deadlocks due
3742 to the fact that so far, a process could not send and receive at
3743 the same time. This made most non trivial communication schema
3745 * Convert the PIDs from long int to int to match the MSG ones (and
3746 linux ones too) [Mt]
3747 * New function: gras_agent_spawn() to launch a new process on
3748 current host. Only working in simulation for now. [Mt]
3749 * New function: gras_os_hostport() returning a constant form (ie,
3750 not needing to be freed) of "gras_os_hostname():gras_os_myport()"
3753 * Make the backtrace of exceptions more human readable [Mt]
3754 * New module: xbt/str [Mt]
3755 a ton of string utility functions (split, join, printf to a newly
3756 allocated buffer, trim, etc)
3757 * New module: xbt/hash [Mt]
3758 SHA1 hashing algorithm (more to come if needed)
3759 * New module: xbt/synchro [Mt]
3760 synchronization tools (mutex and conditions) working the same way
3761 in simulation and in real life (mainly useful for GRAS, but not
3763 * New module: xbt/queue [Mt]
3764 classical producer/consumer synchronization scheme
3765 * xbt_dynar_new_sync() creates a synchronized dynar. All access
3766 (using the classical functions will get serialized) [Mt]
3767 * Make dictionary internal table dynamic. No need to specify its size
3768 anymore; functions xbt_dict_new_ext() and xbt_dict_hashsize_set()
3770 * Make sure the log channels are organized as a tree under windows
3771 (because of ANSI C compatibility issue, any channel were child of
3772 root directly) [Mt].
3775 * Cleaned many thing in surf and fixed a few bugs [AL].
3776 * Add a nice command line configuration mechanism to compose models [AL].
3777 * Add a new model for parallel tasks (ptask_L07) that is less buggy than
3778 the previous one (KCCFLN05). It relies on something that looks like
3779 a max-min sharing mechanism but cannot be written as such. A new solver
3780 was thus designed [AL].
3781 * Add a new solver to lmm. Based on Lagrange optimization and
3782 gradient-based descent, it enables to efficiently maximise systems s.a
3784 sum f_i(x_i) s.t Ax<= b with A_{i,j}>=0 and f_i a concave function.
3786 This solver enables to propose two new network models for TCP Reno and
3787 TCP Vegas based on Low's work. These models still need to be fully
3788 tested though [Pedro Velho].
3791 * Bug fix in SD_simulate. Now the time bound given as argument is
3793 * Use the new parallel task model (ptask_L07) as default.
3794 * Use the SURF command line configuration mechanism.
3795 * 0-size tasks (for synchronization) should now work.
3797 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Sun Apr 12 05:20:36 CEST 2009
3799 SimGrid (3.2) stable; urgency=high
3803 We still experience issues on this platform, but we believe that at
3804 least MSG is usable.
3806 GRAS API BREAKAGE (for simplification purpose, sorry):
3807 * the gras_msgtype_by_name is not used anymore. Instead of
3808 gras_msg_send(toserver, gras_msgtype_by_name("request"), &request);
3809 you can write (and must)
3810 gras_msg_send(toserver, "request", &request);
3811 - If you still want to pass a gras_msgtype_t to the function (to cache
3812 the type and avoid the lookup time), use the gras_msg_send_() variant.
3813 - Impacted functions:
3814 gras_cb_register, gras_cb_unregister, gras_msg_send, gras_msg_wait,
3815 gras_msg_rpccall, gras_msg_rpc_async_call, gras_msg_wait_ext
3816 * The callbacks are now expected to return 0 when everything went well
3817 (just like the main() function)
3819 GRAS new features and improvements:
3820 * New module mechanism where user code can use per process globals [Mt]
3821 This is similar to gras_userdata_*() functions, but for libraries. It
3822 factorize some code developped over and over in the examples and AMOK.
3823 It has still to be documented and used (only amok/peermanagement is
3825 * Fix a vicious bug in the TCP buffering mechanism which leaded to message
3826 loss when they were small enough to fit into the buffer and sent quickly
3827 enough so that they can all get received in one shoot.
3828 * gras_datadesc_by_name and gras_msgtype_by_name: now raise an exception
3829 if not found. Use the *_or_null() variant for the old semantic.
3830 * In gras_msg_handle, do not discard messages without callback.
3831 They are probably messages to be explicitly awaited later (ie, proofs of
3832 mis-synchronization in userland since they are sent before being awaited)
3833 No big deal usually.
3834 * gras_socket_meas_send/recv: semantic changed!
3835 The numerical arguments used to be (1) the total amount of data to send
3836 and (2) msg_size. This was changed to (1) msg_size and (2) amount of
3837 messages. This was need for the fool willing to send more than MAXINT
3838 bytes on quite fat pipes.
3841 * Do really rename the hostmanagement module to peermanagement. [Mt]
3842 Ie, rename functions from amok_hm_* to amok_pm_*. This breaks the API,
3843 but this is rather new and this was documented in the module
3844 documentation (poor excuses, I admit)
3845 * Bandwidth measurement semantic changed! This follows the changes to
3846 gras_socket_meas_send/recv explained above.
3849 * A sequential mode has been added to the workstations. When a workstation
3850 is in sequential mode, it can execute only one task, and the other tasks
3851 are waiting in a FIFO. [Christophe Thiery]
3854 * The KCCFLN05 workstation model now handles parallel tasks. It is the
3855 model for SIMDAG. [Christophe Thiery]
3856 * Bug fix in the maxmin solver: Some values were close to 0 instead of
3857 equal to 0, which caused some bad behaviors in
3858 saturated_constraint_set_update. I now use a threshold mechanism like in
3862 * When running manually src/testall, you select specific units [Mt]
3863 testall is the result of our cunit mechanism, and should replace all
3864 the scripty thingy around since bash don't run easily on billware.
3866 * A mallocator system has been added. [Christophe Thiery]
3867 Mallocators allow you to recycle your unused objects instead of freeing them
3868 and allocating new ones.
3870 Documentation update:
3871 * FAQ reworking + New FAQs:
3872 - "Valgrind spits tons of errors!" [Mt]
3873 - "How to repport bugs" [Mt]
3874 - "Cross-compiling a Windows DLL of SimGrid from Linux" [Mt]
3875 - "What is the difference between MSG, SimDag, and GRAS?" [Mt]
3876 - Communication time measurement within MSG [AL]
3877 - I experience weird communication times when I change the latency [AL]
3878 * GRAS tutorial [Mt]
3880 - an introduction to the framework and to the used communication model
3881 - an initiatic tour introducing the most proheminent features:
3883 . Lesson 0: Installing GRAS
3884 . Lesson 1: Setting up your own project
3885 o Part 2: Message passing
3886 . Lesson 2: Exchanging simple messages
3887 . Lesson 3: Passing arguments to the processes (in SG)
3888 . Lesson 4: Attaching callbacks to messages
3889 . Lesson 5: Using globals in processes
3890 . Lesson 6: Logging information properly
3891 . Lesson 7: Using internal timers
3892 . Lesson 8: Handling errors through exceptions
3893 . Lesson 9: Exchanging simple data
3894 . Lesson 10: Remote Procedure Calling (RPC)
3895 . Lesson 11: Explicitly waiting for messages
3896 . Recapping of message passing features in GRAS
3897 - A HOWTO section containing:
3898 o HOWTO design a GRAS application
3899 More are due, of course. They will come latter. In the meanwhile, you can
3900 check the examples which are still here.
3902 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri Mar 16 21:11:46 CET 2007
3904 SimGrid (3.1) stable; urgency=high
3908 There was a stack corruption somewhere, visible only when optimizing
3909 with these versions. [Vince]
3912 * This is a NEW module! SimDAG (SD for short) is a revival of the old SG
3913 module that enabled to play with Directed Acyclic Graphs. It is built
3914 directly on top of SURF and provides an API rather close to the old
3915 SG. Some old codes using SG are currently under rewrite to check that
3916 all needful functions are provided. [Christophe Thiery]
3919 * Complete rewrite of the KCCFLN05 workstation model. It is now an
3920 extension of the classical CLM03 model that gracefully handles
3921 failures. This is now the default model for MSG and GRAS. It doesn't
3922 handle parallel tasks yet though. [AL]
3923 * Bug fix: Weights were not correctly set in the network part.
3924 WARNING: This may have resulted in incorrect results with simulations
3925 where there are more than one flow on a given link. [AL]
3928 * After a (long ?) discussion on simgrid-devel, we have decided that the
3929 convention we had on units was stupid. That is why it has been decided
3930 to move from (MBits, MFlops, seconds) to (Bits, Flops, seconds).
3931 WARNING: This means that all previous platform files will not work as
3932 such with this version! A warning is issued to ask users to update
3934 A conversion script can be found in the contrib module of the CVS, under
3935 the name contrib/platform_generation/surfxml_update.pl [MQ]
3938 * Bug fix: Processes were started in reverse order, wrt deployment file.
3939 WARNING: if your code relies on this bug, please fix it. [AL]
3940 * Bug fix: Add a test in MSG_task_execute to stop whenever a task is
3941 being executed on two different locations. [AL]
3942 * Bug fix: Failures are now better supported thanks to Derrick's tests
3943 (there was many failure situations I hadn't thought of and that weren't
3944 correctly handled). [AL]
3945 * New function: MSG_host_is_avail indicates you whether a given m_host_t
3949 * New! a real RPC mechanism, as it ought to be since too long. [MQ]
3950 Exception occurring on server-side are propagated back to client (!).
3952 API CHANGE: the callback changed their prototype. Change:
3953 int my_handler(gras_socket_t expeditor, void *payload_data) {
3955 int my_handler(gras_msg_cb_ctx_t ctx , void *payload_data) {
3956 gras_socket_t expeditor=gras_msg_cb_ctx_from(ctx);
3958 * New! function: gras_msg_handleall to deal with all messages arriving
3959 within a given period.
3960 * New! function: gras_socket_server_range to get a server socket in a
3961 range of port numbers (ease to avoid port number conflicts) [MQ]
3962 * New! gras processes display their backtrace when they get a SIGUSR1
3963 or when Ctrl-C is pressed. Use Ctrl-C Ctrl-C to exit.
3964 Sweet to debug RL processes [MQ]
3968 - Do not force experiment sizes to be expressed in kb, or it becomes
3969 impossible to measure the latency this way (needs one byte-long tests)
3970 WARNING: this changes the amok_bw_* function semantic. [MQ]
3971 - Implements the link saturation stuff. [MQ]
3972 * Peer management module:
3973 New! module factorizing code that we wrote over and over [MQ].
3976 * New module: cunit (my jUnit implementation in ansi C) [MQ]
3977 - Test units are placed directly into the library code, they get extracted
3978 automatically and placed into the src/testall binary.
3979 - Convert most of the XBT tests to this system.
3980 * New functions: xbt_dynar_getfirst_as() and xbt_dynar_getlast_as() [MQ]
3981 * XML parsing: rewrote parts of flexml to enable multiple xml parsers to
3982 live in the same C code. This required to change a little bit the API
3983 of surfxml parsing but shouldn't be an issue for end-users. [AL]
3984 * New module: sparse graph structure with basic algorithms (this is work
3985 in progress and the API is not considered to be frozen yet). [AL]
3986 * Display more information on backtraces: source line & function names are
3987 now displayed just like valgrind does (rely on addr2line tool) [MQ]
3988 * New function: xbt_backtrace_display(). Sweet while debugging [MQ]
3989 * Reworked a little bit some #include statements to load only required
3990 headers. Some user code that relied on SimGrid to include stdlib or
3991 stdio may need to include it by themselves. [AL]
3992 * Fixed xbt/log.h. A missing SG_BEGIN_DECL prevented compilation with
3994 * Renamed xbt_host_t into xbt_peer_t since it betterly describes what I
3995 meant. This breaks the API of AMOK and of xbt/config. Sorry about this,
3996 but I guess that almost nobody used those parts. [MQ]
3998 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri, 14 Jul 2006 01:32:27 +0200
4000 SimGrid (3.0.1) stable; urgency=low
4003 * Unfortunately, I had missed 5 misnamed functions:
4004 xbt_fifo_item_t xbt_fifo_newitem(void);
4005 void xbt_fifo_freeitem(xbt_fifo_item_t);
4006 xbt_fifo_item_t xbt_fifo_getFirstItem(xbt_fifo_t l);
4007 xbt_fifo_item_t xbt_fifo_getNextItem(xbt_fifo_item_t i);
4008 xbt_fifo_item_t xbt_fifo_getPrevItem(xbt_fifo_item_t i);
4009 They're now deprecated. Please use their new versions:
4010 xbt_fifo_item_t xbt_fifo_new_item(void);
4011 void xbt_fifo_free_item(xbt_fifo_item_t);
4012 xbt_fifo_item_t xbt_fifo_get_first_item(xbt_fifo_t l);
4013 xbt_fifo_item_t xbt_fifo_get_next_item(xbt_fifo_item_t i);
4014 xbt_fifo_item_t xbt_fifo_get_prev_item(xbt_fifo_item_t i);
4016 * Bugfix: really disconnect fifo items which are remove_item()ed [AL]
4017 * Documentation: xbt_log module unmercifully reworked [MQ]
4018 * Bugfix: there was a problem with the ending of contexts with
4019 the pthread backend. It caused some weird deadlock or behavior
4020 depending on the pthread implementation. [AL]
4021 * Bugfix: get the exceptions raised in the simulator repport where
4022 and why they come from when they are not caught in time [AL, MQ]
4025 * Bugfix: Do repport the error when two non-connected hosts try to
4026 exchange data (Thanks to Flavien for stumbling into this one) [AL]
4029 * Add additionnal checkings on communications. Assert that two
4030 communicating hosts are connected by a set of links... [AL]
4033 * Add additionnal checkings on channel values in communication [AL]
4034 * New: MSG_task_get_source to see on which host a task was generated [HC]
4035 * New: int MSG_task_probe_from_host(int channel, m_host_t host): returns
4036 the number of tasks waiting to be received on channel and sent
4038 * New: MSG_error_t MSG_task_get_from_host(m_task_t * task, int channel, m_host_t host);
4039 waits for the first task coming from a given host.. [AL]
4041 GRAS new functionnalities: [MQ]
4042 * Enhance the parsing macro to allow the size of multidimentional objects
4043 to be given thru annotations.
4044 * New example (and documentation): Matrix Multiplication a la RPC
4045 (as when I was young!) and fix a bunch of bugs found on the way.
4047 GRAS performance improvements: [MQ]
4049 * Reduce the amount of cbps creation/destruction by making it static to
4050 datadesc_send/recv() and using a (newly created) cbps_reset (based on
4053 * Change libdata to a set so that we can search for stuff by ID (and thus
4054 reduce the insane amount of dict lookups)
4057 * Actually implement gras_datadesc_copy() so that we don't have to mimick
4058 RL communication on top of SG since it's so uneffective.
4059 It may also be used for inter-thread communication in RL, one day.
4060 * Use gras_datadesc_copy() to exchange messages on top of SG
4062 - improve message exchange performance on top of SG
4063 - deprecate transport_plugin_sg.c:gras_trp_sg_chunk_send() & recv()
4064 * Don't exchange on the network the size of the used part of buffer,
4065 instead, specify the possible buffer size to read().
4067 - reduces the amount of read/write calls (one pair per exchange)
4068 - reduces the amount of exchanged data (the size)
4069 - allows to retrieve all arrived data on receiver side, if we don't need
4070 it right now (subsequent read will peek the buffer)
4071 - allows the receiver to proceed with the beginning of the stream before
4072 everything is arrived
4073 - make it possible to build an iov transport (using readv/writev)
4075 - take care of the data with non-stable storage (like stacked data),
4077 * If possible, TCP send uses vector I/O (when writev() is here)
4078 - Don't use it for receive since we send data sizes and data on the
4079 same stream, so we wouldn't be able to chain large amount of chunks
4080 before having to flush the stuff to read the size.
4081 * Rework the transport plugin mechanism to simplify it and reduce the
4082 amount of pointer dereferencement when searching for the right function
4085 * I guess that now, we do almost as few system calls as possible while
4086 doing as few data copy as possible.
4088 To improve it further, we could try to send all the sizes first and then
4089 all the data (to use iov on receiving size), but it's only a partial
4090 solution: when you have 2 dimensional data, the sizes of the second
4091 dimension is data of the first dimension, so you need 3 streams.
4093 I'm not sure the potential performance gains justify the coding burden.
4095 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri, 21 Oct 2005 14:42:20 +0200
4097 SimGrid (3.00) stable; urgency=high
4100 * New! Give the possibility to hijack the surf parser and thus bypass
4101 MSG_create_environment and MSG_launch_application. Have a look at
4102 examples/msg/msg_test_surfxml_bypassed.c to see how it can be done.
4104 -- Arnaud Legrand <simgrid-devel@lists.gforge.inria.fr> Sat, 20 Aug 2005 23:25:25 -0700
4106 SimGrid (2.96) unstable; urgency=low
4111 * New! Exception handling with setjmp or such (code from OSSP ex) [MQ]
4112 This deprecates the xbt_error_t mechanisms.
4113 It modifies (simplifies) all XBT and GRAS API.
4114 MSG API keeps unchanged (exceptions raised by XBT are caught from
4115 within MSG and masked with existing error handling facilities)
4118 * New! Add a FATPIPE model. [AL]
4119 * New! Add a parallel task model. [AL]
4120 * New! Add automatically a loopback interface (in the default
4121 network model) if none was precised.
4124 * Bugfix: MSG_process_resume now works with the current running process.
4126 * New! Add MSG_parallel_task_create and MSG_parallel_task_execute. [AL]
4127 * Modification of MSG_task_get_compute_duration. Once a task has been
4128 processed, the value returned by this function is now equal to 0. [AL]
4129 * New! Add double MSG_task_get_remaining_computation(m_task_t task) and
4130 MSG_error_t MSG_task_cancel(m_task_t task). Add a state
4131 (MSG_TASK_CANCELLED) to MSG_error_t corresponding to the cancelation
4132 of a m_task. For now, MSG_task_cancel only works with computation
4134 * New! Add double MSG_get_host_speed(m_host_t h) that returns the speed
4135 of the processor (in Mflop/s) regardless of the current load on the
4137 * API Change: use proper naming convention for MSG_getClock and
4138 MSG_process_isSuspended: MSG_get_clock and MSG_process_is_suspended.
4140 * New! Add void MSG_task_set_priority(m_task_t task, double priority).
4141 This function changes the priority of a computation task. This priority
4142 doesn't affect the transfer rate. A priority of 2 will make a task
4143 receive two times more cpu power than the other ones. This function
4144 has been added to suit the needs of Nguyen The Loc and hasn't been that
4145 much tested yet. So if it fails, please report it and send me your code.
4147 * API Change: removed all functions and types that were marked "deprecated"
4148 since many months. Renamed MSG_global_init_args to MSG_global_init.
4150 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Mon, 8 Aug 2005 17:58:47 -0700
4152 SimGrid (2.95) unstable; urgency=low
4155 * Steal some nice code to GNU pth to fix context detection and usage [AL]
4156 * Cleanup in the xbt_config API; add configuration callbacks. [MQ]
4157 * Cleanup in the initialization API: the unused "defaultlog" is dead. [MQ]
4160 * Bugfix: Allow absolute paths for platform description files [MQ]
4161 * Bugfix: do free the variables after use. Leads to drastic performance
4163 * Implement max_duration (ie, timeouts) on resources [AL]
4166 * Implement MSG_config to configure MSG at runtime. xbt_cfg test on a real
4168 * Implement MSG_channel_select_from() to help GRAS now that SURF provide
4169 the needed support (timeouts) [AL]
4172 * Implement measurement sockets. You can now get the bandwidth between two
4173 hosts thanks to AMOK (see below). [MQ]
4174 * gras_datadesc_dynar() builds a dynar type descriptor, allowing to send
4175 dynar over the network (yeah) [MQ]
4176 * Real (even if simplistic) implementation of gras_os_myname() on RL [MQ]
4177 * simple/static token-ring example. [Alexandre Colucci and MQ]
4178 * Use MSG_channel_select_from() and remove the *slow* hack we had to put
4179 in place before [MQ]
4182 * Differentiate the types "char[22]" and "unsigned char[22]" in automatic
4183 type parsing. "short" and "long" modifiers were also ignored; other
4184 modifier (such as reference level) are still ignored. [MQ]
4185 * Embeed the buffer size within the buffer itself on SG. [MQ]
4186 That way, send() are atomic and cannot get intermixed anymore (at least
4187 the ones which are less than 100k; bigger messages still have the issue)
4188 * Array size pushed by the field, not by the field type (or each
4189 and every long int will push stuff to the cbps) [MQ]
4190 * use select() to sleep since it allows to portably sleep less than one
4193 GRAS (minor cleanups)
4194 * <project>.Makefile.local (generated from gras_stub_generator) |MQ]:
4197 * Type Callbacks now receive the gras_datadesc_type_t they work on as argument.
4198 * type category 'ignored' killed as it was never used and were difficult
4200 * whether a type can cycle or not is now a flag, leaving room for more
4201 flags (as "ignored", if we feel the need one day ;)
4202 * Rename raw sockets to measurement sockets since "raw" has another
4203 meaning in networking community.
4206 * Advanced Metacomputing Overlay Kit introduction. It is based over GRAS
4207 and offers features not belonging to GRAS but that most applications
4208 need. One day, it may be a set of plugins loadable at runtime.
4209 * New module: bandwidth
4210 bandwidth measurement between arbitrary nodes running this module. [MQ]
4212 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Thu, 30 Jun 2005 16:29:20 -0700
4214 SimGrid (2.94) unstable; urgency=low
4216 The first beta release of SimGrid 3 !
4220 * Update the main page and the FAQ. Adding references to gforge.
4223 * Add a gras_os_getpid function.
4226 * Add MSG_task_get_compute_duration() and MSG_task_get_data_size()
4227 * Extend the logs so that they also print PID, hostname, date, ... if
4229 * Convert the MSG example to the use of xbt_logs instead of PRINT_MESSAGE,
4230 and kill the old version which were in testsuite/
4231 * Rewrite tools/MSG_visualization/colorize.pl for using with logs instead
4235 * Add xbt_os_time(). As the rest of xbt/portability, this is not public
4236 for users. Instead, each programming environment (GRAS, MSG,...) use it
4237 when needed to provide such a feature to users.
4238 Don't shortcut the mechanism or you will also shortcut the virtualization
4239 you need on the simulator.
4243 * Cleanups in configury with regard to compile optimization/warning flags.
4244 Also add -fno-loop-optimize to any powerpc since it's the optimization
4245 killing gcc (< 3.4.0).
4246 * Doxygen cleanups: move MSG examples, kill the second Doxygen phase
4247 needed by MSG examples complications
4248 * Borrow configury beautifications from PHP
4251 * Bugfix: XBT_LOG_NEW_DEFAULT_CATEGORY now compiles without compiler
4252 warning (thanks loris for stumbling into this one).
4253 * Bugfix: stop loading private headers (gras_config.h) from the public
4257 * Change SIMGRID_INSTALL_PATH to GRAS_ROOT in Makefiles generated for user.
4258 * Rename gras_get_my_fqdn to gras_os_myname and implement it in the simulator
4259 RL would imply a DNS resolver, which is *hard* to do in a portable way
4260 (and therefore delayed).
4261 * Implement a real timer mechanism and use it in timing macros. This allows
4262 to avoid rounding errors and get a 0.000005 sec precision in timing
4263 macros. While I was at it, various cleanups:
4264 - allow to declare more than one timed section per file (fix a stupid bug)
4265 - move some private declaration to the right place
4266 - merge conditional execution and timing macros into emulation module
4267 - document the module
4268 - make sure the module cleanups its mess on gras_exit
4269 * Documentation improvements:
4270 - (new) how to compile applications using GRAS
4271 - (new) emulation support (timing macros)
4273 -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri, 13 May 2005 10:49:31 +0200
4275 SimGrid (2.93) unstable; urgency=low
4277 Alpha 4 on the path to SimGrid 3 (aka the "neuf-trois" version)
4280 - Use Paje properly where used. Still to be sanitized properly.
4281 - Portability fix: Add an implementation of the contexts using pthread
4285 - Add xbt_procname(): returns the name of the current process.
4286 Use it to show the current process's name in all logging.
4288 - fix detection of older flex version and the reaction, since we do
4289 depend on modern ones (we use lex_destroy)
4290 - Better separation of SG and RL in the libs: remove all simulation code
4291 from libgras. As a result, this lib is now only 200k when stripped.
4292 Some of the xbt modules may also be duplicated (two sets and such) and
4293 should be cleaned/killed before SG3.
4294 - Insist on using xlC on AIX because of weird problems involving gcc there.
4295 - Cleanup the make remote stuff. This is now done by scripts
4296 tools/graspe-{master,slave} (GRAS Platform Expender). This is still
4297 mainly for our private use, but we're working on changing them to user
4300 - Bugfix: flush the socket on close only if there is some *output*.
4301 - Bugfix: flush idempotent when there's nothing to send (don't send size=0)
4303 - Add MSG_task_get_name. The task names are mainly for debugging purpose,
4306 -- SimGrid team <simgrid2-users@listes.ens-lyon.fr> Fri, 4 Mar 2005 14:32:37 -0800
4308 SimGrid (2.92) unstable; urgency=low
4310 Alpha 3 on the path to SimGrid 3
4314 - New! First try of benchmarking macros.
4315 - New! First try so that gras_stub_generator generate deployment and
4316 remote compilation helpers.
4318 - Bugfix: Initialization fix in msg_test.
4322 - Bugfix: applied patch to lexer so that it doesn't need a huge heap.
4324 - Bugfix: let dicts work with NULL content (_foreach didn't) and cleanups
4326 - API Change: gras_os_sleep to take the amount of seconds as a double.
4327 Accepting an int was error prone since it was the only location where
4328 seconds were coded as such. It leaded to damn rounding errors.
4329 - Bugfix: Hard to belive that timers ever worked before this.
4331 -- SimGrid team <simgrid2-users@listes.ens-lyon.fr> Wed, 23 Feb 2005 22:09:21 +0100
4333 SimGrid (2.91) unstable; urgency=low
4335 Alpha 2 on the path to SimGrid 3
4339 - Bug fix in the lmm_solver.
4341 - New! Interface to Paje (see http://www-id.imag.fr/Logiciels/paje/)
4342 through the function MSG_paje_output.
4343 - New! Introducing two new functions MSG_process_kill() and MSG_process_killall().
4344 - It is possible to bound the rate of a communication in MSG with
4345 MSG_task_put_bounded() (was already in the previous version but I had forgotten
4346 to write it in the changelog).
4347 - Bug fix to let GRAS run on top of MSG until we move it directly on top
4352 - Various cleanups to the autotools stuff
4353 - Begin to move Gras examples to examples/gras/
4354 - Let make distcheck work again (yeah!)
4356 - documentation overhauled using doxygen.
4357 gtk-doc-tools is dead in SimGrid now.
4358 - Automatically extract all existing logging categories, and add the list
4359 to the documentation (long standing one, to say the less)
4361 - Cleanup the known architecture table. Reorder the entries to group what
4362 should be, and use a more consistent naming scheme.
4363 (some of the test dataset are still to be regenerated)
4364 - New! Allow library to register globals on each process just as userdata
4366 This is implemented using a xbt_dict and not a xbt_set, so we loose the
4367 lookup time (for now).
4368 Use it in msg and trp.
4369 This cleans a lot the internals and helps enforcing privacy of the
4370 headers between the gras components.
4371 - New! Add a timer mechanism, not unlike cron(8) and at(1).
4372 - Bugfix: gras_os_time was delirious in RL.
4373 - Bugfix: gras_trp_select/RL don't run into the wall when asked to select
4375 - Reenable GRAS now that it works.
4377 -- Arnaud Legrand <Arnaud.Legrand@imag.fr> Mon, 14 Feb 2005 14:02:13 -0800
4379 SimGrid (2.90) unstable; urgency=low
4381 Alpha 1 on the path to SimGrid 3
4383 * It is a long time since the last release of SimGrid. I'm sorry about
4384 that but as I had told you, I was rewriting a lot of things. I apologize
4385 to those who had been reporting bugs to me and that I had not answered.
4386 If your bug is still in the new version, please tell me. Here is a
4387 summary of the main changes.
4389 * REVOLUTION 1: The SimGrid project has merged with the GRAS project
4390 lead by Martin Quinson. As a consequence SimGrid gains a lot in
4391 portability, speed, and a lot more but you'll figure it out later.
4392 SimGrid now comprises 3 different projects: MSG, GRAS and SMPI.
4393 I wanted to release the new MSG as soon as possible and I have
4394 broken GRAS, which is the reason why, for now, only MSG is fully
4395 functional. A laconic description of these projects is available
4396 in the documentation.
4398 * REVOLUTION 2: I have removed SG and I am now using a new simulation
4399 kernel optimized for our needs (called SURF but only the developers
4400 should use it). Hence, MSG is now roughly 30 times faster and I think
4401 that by rewriting a little bit MSG, I could event speed it up a little
4402 bit more. Beside the gain in speed, it is also much easier to encode a
4403 new platform model with SURF than it was with SG. More to come...
4405 * REVOLUTION 3: I have tried to change a little as possible the API of
4406 MSG but a few things really had to disappear. The main differences
4407 with the previous version are:
4408 1) no more m_links_t and the corresponding functions. Platforms are
4409 directly read from an XML description and cannot be hard-coded
4410 anymore. The same format is used for application deployment
4411 description. The new format is described in the documentation.
4412 Have a look in tools/platform_generation. There is a tiny script
4413 that converts from the old platform format to the new one. Concerning
4414 the application deployment format, parsing the old one is tricky.
4415 I think most of you should however be able to convert your files. If
4416 it is really an issue, I can write a C code that does the conversion.
4418 2) the toolbox tbx does not exist anymore. We now have a library
4419 with much more data-structures but without the hash-tables (we have
4420 dictionaries that are much faster).
4422 -- Arnaud Legrand <Arnaud.Legrand@imag.fr> Mon, 31 Jan 2005 10:45:53 -0800
4424 *****************************************************************************
4425 * Follows the old GRAS changelog. It does not follow the same syntax, but I *
4426 * don't feel like converting the oldies. (Mt) *
4427 *****************************************************************************
4430 Version 2.90: "the long awaited one"
4431 - Finished rewriting and debugging MSG. Rewrote the documentation.
4432 - disable GRAS for now since it needs to be ported to the newest SG
4435 - Finish the port to windows (using mingw32 for cross-compile)
4438 - Main loop and datastructures of SURF. A cpu resource object is
4439 functional. Surf can thus be used to create cpu's with variable
4440 performance on which you can execute some actions.
4442 2004-11-15 Martin Quinson
4443 - Port to ARM. Simply added the alignment and size descriptions. Should
4444 work, but the ARM machines are so slow that I didn't had the opportunity
4445 to 'make check' over there yet.
4447 2004-11-15 Arnaud Legrand
4448 - Trace manager now written. It uses a heap structure and is therefore
4449 expected to be efficient. It may however be speeded up (particularly
4450 when many events occur at the same date) by using red and black
4451 trees. One day maybe...
4452 - Max-min linear system solver written. It uses a sparse matrix
4453 structure taking advantage of its expected use. Most operations are
4454 O(1) and free/calloc are called as few as possible. The computation of
4455 the minimum could however be improved by using a red and black tree
4458 2004-11-03 Arnaud Legrand
4459 - Rename every gras_* function that was in xbt/ to its xbt_
4461 - Add a heap and a doubly-linked list to xbt
4462 - Added a dichotomy to the dictionaries. make check works as well before
4463 so I assume that the patch is correct. I do not know however if things
4464 run effectively faster than before now. :)
4466 Inclusion of the SimGrid tree in the GRAS one. The archive is renamed to
4467 SimGrid, and the version number is bumped to 2.x
4469 2004-10-29 Martin Quinson
4470 - Introduction of the remote errors.
4471 They are the result of a RMI/RPC on the remote machine.
4472 ErrCodes being scalar values, you can't get the host on which those
4473 errors did happen. Extending the error mechanism as in Gnome is possible.
4474 No idea yet whether it is a good idea.
4476 2004-10-28 Martin Quinson
4477 - Interface revolution: the Starred Structure Eradication.
4478 I used to do typedef struct {} toto_t; and then handle *toto_t.
4479 Arnaud (and Oli) didn't like it, and I surrendered. Now, you have:
4480 - ???_t is a valid type (builded with typedef)
4481 - s_toto_t is a structure (access to fields with .)
4482 - s_toto is a structure needing 'struct' keyword to be used
4483 - e_toto_t is an enum
4484 - toto_t is an 'object' (struct*)
4486 typedef struct s_toto {} s_toto_t, *toto_t;
4487 typedef enum {} e_toto_t;
4488 Moreover, only toto_t (and e_toto_t) are public. The rest (mainly
4489 s_toto_t) is private.
4491 - While I was at it, all gras_<obj>_free() functions want a gras_<obj>_t*
4492 so that it can set the variable to NULL. It was so for dicts and sets,
4493 it changed for dynars.
4495 - Fix a bunch of memleaks in dict_remove
4496 - Fix a bug in sg/server_socket opening: it failed all the time.
4498 2004-10-07 Martin Quinson
4499 - Speed up dynar lookup operation a bit.
4501 gras_dynar_get is dead.
4503 Now, you can choose between gras_dynar_get_cpy (the old gras_dynar_get
4504 but should be avoided for efficiency reasons) and gras_dynar_get_ptr
4505 (which gives you the address of the stored data).
4507 gras_dynar_get_as is an helpful macro which allows you to retrieve a
4508 copy of the data using an affectation to do the job and not a memcpy.
4510 int toto = gras_dynar_get_as(dyn,0,int); rewrites itself to
4511 int toto = *(int*)gras_dynar_get_ptr(dyn,0);
4513 It does not really speedup the dynar test because they are
4514 setting elements all the time (and look them seldom). But the dict does
4515 far more lookup than setting.
4517 So, this brings the dict_crash test from ~33s to ~25s (200000 elms).
4519 2004-10-05 Martin Quinson
4520 - Allow to (en/dis)able the cycle detection at run time.
4522 Whether we should check for cycle or not is now a property of each
4523 datatype. When you think there may be some cycle, use datadesc_cycle_set.
4524 datadesc_cycle_unset allow to remove this property when previously set.
4526 Note that the cycle detection is off by default since it impacts the
4527 performance. Watch the data you feed GRAS with ;)
4529 This property is hereditary. Any element embedded in a structure having it
4530 set have it set for the time of this data exchange.
4532 You should set it both on sender and receiver side. If you don't set it on
4533 sender side, it will enter an endless loop. If you forget on receiver
4534 side, the cycles won't be recreated after communication.
4536 - Header reorganization.
4537 Kill gras_private.h, each submodule must load the headers it needs.
4539 2004-10-04 Martin Quinson
4540 - Interface revolution: do not try to survive to malloc failure.
4542 Now, gras_malloc and friends call gras_abort() on failure.
4543 As a conclusion, malloc_error is not a valid error anymore, and all
4544 functions for which it was the only gras_error_t return value are
4545 changed. They now return void, or there result directly.
4546 This simplify the API a lot.
4548 2004-09-29 Martin Quinson
4549 - Re-enable raw sockets.
4550 Created by gras_socket_{client,server}_ext;
4551 Used with gras_raw_{send,recv}
4554 It should allow to kill the last bits of gras first version soon.
4556 This is not completely satisfactory yet (duplicate code with
4557 chunk_{send,recv}; a bit out of the plugin mechanism), but it should
4560 - Simplify transport plugin (internal) interface by not passing any
4561 argument to _server and _client, but embedding them in the socket
4564 2004-09-28 Martin Quinson
4565 - Finish the port to AIX.
4566 autoconf was my problem (segfault within the malloc replacement
4567 function. No idea why)
4569 2004-09-16 Martin Quinson
4570 - Fix some size_t madness on 64bit architectures.
4572 2004-09-08 Martin Quinson
4573 - Reduce the number of system headers loaded, overload some more system
4574 calls (such as malloc to cast the result of the system one, and work
4576 - Fix and reintroduce the config support
4578 2004-09-07 Martin Quinson
4579 - Source code reorganization to allow Arnaud to surf all over there.
4580 - Allow to document the logging categories.
4581 - Remove all uppercase from logging categories and useless cleanup in names.
4583 2004-08-18 Martin Quinson
4584 Version 0.6.2 (protocol not changed; API changed)
4585 - Interface cleanup: gras_msgtype_by_name returns the type (instead of a
4586 gras_error_t), and NULL when not found. Functions expecting a msgtype
4587 as argument (msg_wait; msg_send) deal with NULL argument by providing a
4588 hopefully usefull message.
4589 - Portability to prehistoric sparcs again
4591 2004-08-17 Martin Quinson
4592 Version 0.6.1 (protocol not changed; ABI not changed)
4593 - prealloc some buffers to speed things up
4595 2004-08-11 Martin Quinson
4596 Version 0.6 (protocol not changed; ABI expended)
4597 - The parsing macro can deal with the references, provided that you add
4598 the relevant annotations (using GRAS_ANNOTE(size,field_name))
4600 2004-08-09 Martin Quinson
4601 Version 0.5 (protocol not changed; ABI changed)
4602 - Allow to off turn the cycle detection code in data exchange at
4603 compilation time. It should be at run time, but I'm short of time (and
4604 the config stuff is still broken). That way, we keep dict out of the
4605 critical path, which is good because the performance is poor:
4606 - search not dichotomial yet
4607 - dynar give no way to access their content and memcpy everytime
4608 - In composed data description (struct, ref and so on), stop foolness of
4609 keeping the subtype's ID, but store the type itself. This keeps sets out
4610 of the critical path, which is good since they rely on dynar and
4611 dictionaries. The only loose of that is that we cannot detect the
4612 redeclaration of a structure/union with another content (but I'm not sure
4613 the code detected well this error before anyway). We still can detect
4614 the redefinition discrepancy for the other types.
4615 - Use a whole bunch of optimisation flags (plus -fno-strict-aliasing since
4616 it breaks the code because of type-punning used all over the place).
4617 This breaks on all non-gcc architectures (for now).
4619 All those changes (plus the buffer of last time) allow me to gain 2 order
4620 of magnitude on cruel tests consisting of 800000 array of integers on two
4621 level of a hierarchical structure (200 secondes -> 4 secondes)
4624 - the selector of reference must now return the type it points to, not
4625 the ID of this type.
4627 2004-08-06 Martin Quinson
4628 Version 0.4 (protocol changed; ABI not changed)
4629 - Allow to pass --gras-log argument to processes in simulation mode. Really.
4630 - New debugging level: trace (under debug) to see effect of GRAS_IN/OUT
4631 - Implement a buffer transport, and use it by default (it relies on tcp in
4632 real life and on sg in simulation).
4633 That's a bit hackish since I had a new field to the structure to store
4634 its data without interfering with the subtype ones. Inheritance
4635 is tricky in C. And that's a kind of reverse inheritance with one class
4636 derivating two classes. Or maybe a game with java interfaces. Anyway,
4637 that's damn hard in C (at least).
4638 Moreover, I got tired while trying to ensure plugin separation and
4639 genericity in SG mode. MSG wants me to do weird things, so let's go for
4640 cruel hacks (temporarily of course ;).
4641 See comment in transport_private.h:71
4642 - do not include all the _interface headers in private but in the files
4643 which really need them (to cut the compilation time when they are
4646 2004-07-26 Martin Quinson
4647 Version 0.3 (protocol not changed; ABI changed)
4648 - Major overhault of the datadesc interface to simplify it:
4649 - shorted the function names:
4650 s/gras_datadesc_declare_struct/gras_datadesc_struct/ and so on
4651 - add a trivial way to push/pop integers into the cbps without malloc.
4652 This allows to make really generic sub_type description, which simply
4653 pop their size of the stack.
4654 - add a function gras_datadesc_ref_pop_arr() which does what users want
4655 most of the time: Declare a dynamic array (which pops its size of the
4656 stack) and declare a reference to it. Poor name, but anyway.
4657 - kill the post-send callback, add a post-receive one
4659 2004-07-23 Martin Quinson
4660 Version 0.2 (protocol changed; ABI changed)
4661 - add some testing for cpbs in the test cases, and fix some more bugs.
4662 This invalidate again the little64 data file, since I cannot regenerate
4664 - remove an awfull optimization in the logging stuff, allowing me to:
4665 - understand it again
4666 - learn gcc how to check that the argument match the provided format
4667 - fix all errors revealed by gcc after that
4668 - internal keys of dict are not \0 terminated. Deal with it properly in
4669 loggings instead of segfaulting when the user want to see the logs :-/
4671 2004-07-22 Martin Quinson
4672 - Fix some stupid bug preventing cbps (callback postit) from working
4674 2004-07-21 Martin Quinson
4675 - Some documentation cleanups
4676 - remove the useless last argument of msgtype_declare
4677 - rename the Virtu functions to fit into the 'os' namespace
4678 - move headers src/include -> src/include/gras/ and stop fooling with
4679 gras -> . symbolic link
4680 - make distcheck is now successful
4682 2004-07-19 Martin Quinson
4684 - Build shared library also
4685 - Install html doc to the right location
4686 - stop removing maintainer files in make clean
4687 - build tests only on make check
4689 2004-07-13 Martin Quinson
4691 - No major issue in previous version => change versioning schema
4692 - Re-enable little64 convertion test now that Abdou kindly regenerated the
4693 corresponding dataset.
4695 2004-07-11 Martin Quinson
4697 - Get it working with any kind of structure (we can compute the padding
4698 bytes remotely for all the architectures I have access to)
4699 - Implement the structure parsing macro (still not quite robust/complete)
4700 - Improvement to the remote testing toysuite
4702 2004-07-10 Martin Quinson
4703 [autoconf mechanism]
4704 - get ride of a bunch of deprecated macros
4705 - actually run the test for two-compliment, not only compile it :-/
4706 - test whether the structures get packed (and bail out if yes. Damn.
4707 Alignment is a serious matter)
4708 - test whether the structures get compacted (but respecting the alignment
4709 constraints of each types)
4710 - test whether the array fields of structures can straddle alignment boundaries
4712 - Damnit, double are bigger than float (typo in creation of 'double' datadesc)
4713 (took me 2 hours to find that bug, looking at the wrong place)
4714 - Add gras_datadesc_declare_{union,struct}_close(). They must be used
4715 before sending/receiving and are used to compute the offsets of fields
4716 - Given that padding size depend even on compiler options, keep track of
4717 alignment and aligned_size only for the current architecture. Not a big
4718 deal since we send structure fields one after the other (seems
4720 - Add the datastructure used for IEEE paper by the PBIO guys to the test
4721 program, let it work on linux/gcc/little32. portability todo.
4723 2004-07-08 Martin Quinson
4724 - import and improve remote compilation support from FAST
4725 - make sure make check works on half a dozen of machines out there
4727 2004-07-07 Martin Quinson
4728 Let's say it's version 0.0.3 ;)
4729 - Implement conversions (yuhu!)
4730 - Let it work on solaris (beside conversion, of course)
4731 - Stupid me, using rand() to generate the conversion datatests in not wise.
4733 2004-07-06 Martin Quinson
4734 - Let make dist work, since I'm gonna need it to compile on remote hosts
4735 - Let Tests/datadesc_usage write the architecture on which the file was
4736 generated as first byte.
4737 - Add PowerPC (being also IRIX64), SPARC (also power4) and ALPHA
4738 architecture descriptions.
4739 - Add datadesc_usage.{i386,ppc,sparc} files being the result of execution
4740 on those architectures.
4741 - Optimization: send/recv array of scalar in one shoot
4743 2004-07-05 Martin Quinson
4744 - YEAH! GRAS/SG and GRAS/RL are both able to run the ping example !
4746 - Plug a whole bunch of memleaks
4747 - each process now have to call gras_{init,exit}. One day, their log
4748 settings will be separated
4749 - Continue the code factorisation between SG, RL and common in Transport.
4751 2004-07-04 Martin Quinson
4753 - Redistribution between SG and RL.
4754 We wanna have to accept in SG, so move accepted related parts of RL in
4755 the common part. (more precisely, the dynar of all known sockets is no
4756 more a static in transport.c, but part of the process_data)
4758 [gras_stub_generator]
4759 - Bug fix: Do call gras_process_init from gras_init (wasnt called in RL).
4761 2004-07-03 Martin Quinson
4762 - Create a new log channel tbx containing dict, set, log, dynar (to shut
4763 them all up in one shot)
4765 - Fix the ugly case of reference to dynamic array.
4766 - New (semi-public) function gras_datadesc_size to allow the messaging
4767 layer to malloc the needed space for the buffer.
4769 - gras_socket_close now expect the socket to close (and not its address to
4770 put NULL in it after it). This is because the socket passed to handlers
4771 is one of their argument (=> not writable).
4773 - propagate the interface cleanup from last week in datadesc, ie remove a
4774 superfluous level of indirection. User pass adress of variable
4775 containing data (both when sending and receiving), and not of a variable
4776 being a pointer to the data. Let's say that I like it better ;)
4777 The price for that is constructs like "int msg=*(int*)payload" in
4778 handlers, but it's a fine price, IMHO.
4780 - Let it work in RL (yuhu)
4782 2004-06-21 Martin Quinson
4784 - porting SG plugin and SG select to new standards (works almost).
4785 - plug memleaks and fix bugs around.
4788 - cleanup the prototype of data recv and force users to specify when they
4789 want to handle references to objects. Test case working even for cycles.
4790 - plug memleaks. Valgrind is perfectly ok with this.
4792 2004-06-12 Martin Quinson
4794 - cleanup the separation between plugin and main code in plugin creation
4796 2004-06-11 Martin Quinson
4798 - Reput hook for raw sockets, needed for BW experiments
4799 - kill a few lines of dead code
4800 [Data description] Interface cleanup
4801 - gras_datadesc_by_name returns the searched type or NULL.
4802 That way, no variable is needed to use a type desc once, which makes
4804 - gras_datadesc_declare_[struct|union]_append_name is removed. The last
4805 two parameters were strings (field name, type name), leading to
4807 [Dicos] Interface cleanup
4808 - gras_dico_retrieve -> gras_dico_get ; gras_dico_insert -> gras_dico_set
4809 This is consistant with the dynar API.
4811 2004-04-21 Martin Quinson
4813 - Porting to new standards.
4815 - interface cleanup.
4816 There is no bag anymore, no need to take extra provision to mask the
4817 pointers behind "ID".
4818 Better splitup of functions between files create/exchange/convert.
4819 This is still a bit artificial since convert and receive are so
4820 interleaved, but anyway.
4822 - add a queued message list to procdata (the ones not matching criteria
4824 - factorize some more code between SG and RL wrt procdata
4826 - use gras_exit in example to track memleaks
4827 - get rid of gs_example now that GS is properly integrated into gras
4828 - update run_test to integrate the latest tests (datadesc)
4830 - rename WARNINGn macros to WARNn since it prooved error-prone
4832 2004-04-19 Martin Quinson
4834 - register init/exit functions within gras module mechanism
4835 - send/receive function.
4836 Convertion is not implemented, but short-cutted if not needed.
4837 struct/array elements are sent one by one (instead of block-wise), but
4838 nobody really cares (yet). Get a prototype before optimizing.
4839 - tests (using a file socket) for DD send/receive on:
4840 - base types: int, float
4841 - array: fixed size, string (ie ref to dynamic string)
4842 - structure: homogeneous, heterogeneous
4843 - chained list, graph with cycle
4844 Believe it or not, valgrind is not too unhappy with the results. The
4845 cycle happily segfaults, but the others are ok. And I'm sick of pointers
4849 - Bugfix when using a filename explicitly (instead of '-')
4851 2004-04-09 Martin Quinson
4853 - factorize more code between RL and SG in socket creation
4854 - Complete the implementation and tests of:
4856 o file (only in RL, and mainly for debugging)
4858 I lost 3 days to design a portable address resolver, and then decided
4859 that the prototype mainly have to run on my box.
4860 Addressing portability too early may be like optimizing too early :-/
4862 - use gras_init in the Tests instead of the crappy parse_log_opt
4863 (the latter function is removed)
4864 [Conditional execution]
4865 - New functions: gras_if_RL/gras_if_SG (basic support for this)
4866 [Code reorganisation]
4867 - Get rid of libgrasutils.a since it makes more trouble than it solves.
4868 Build examples against the RL library, since there is no way to disable
4869 its creation for now.
4871 For information, the beginning of coding on GRAS was back in june
4872 2003. I guess that every line has been rewritten at least twice since