CMakeLists.txt

   1 cmake_minimum_required(VERSION 2.8.8)
   2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
   3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
   4
   5 project(SimGrid C CXX)
   6
   7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
   8 #     Check for the compiler        #
   9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
  10
  11 ### Need to set rc ccompiler before enable language
  12 if(WIN32)
  13   SET(CMAKE_RC_COMPILER "windres")
  14 endif()
  15
  16 ##
  17 ## Check the C/C++ standard that we need
  18 ##   See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
  19 if (MSVC)
  20   message("-- You are compiling SimGrid with MicroSoft Visual C. Good luck.")
  21
  22   set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D_SCL_SECURE_NO_WARNINGS")
  23   set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_SCL_SECURE_NO_WARNINGS")
  24 else() # gcc or clang
  25   INCLUDE(CheckCCompilerFlag)
  26   CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
  27
  28   ## Request full debugging flags
  29   set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
  30   set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
  31   set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
  32
  33   if (CMAKE_COMPILER_IS_GNUCC)
  34     if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
  35       message(FATAL_ERROR
  36               "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
  37               "You need a sufficient support of c++11 to compile SimGrid.")
  38     endif()
  39   endif()
  40
  41   ## We need a decent support of the c++11 standard
  42   include(CheckCXXCompilerFlag)
  43   CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
  44   if(COMPILER_SUPPORTS_CXX11)
  45     set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
  46   else()
  47     message(FATAL_ERROR
  48             "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
  49             "Please use a decent C++ compiler.")
  50   endif()
  51
  52   ### And we need C11 standard, too
  53   include(CheckCCompilerFlag)
  54   CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
  55   if(COMPILER_SUPPORTS_C11)
  56     set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
  57   else()
  58     message(FATAL_ERROR
  59             "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
  60             "Please use a decent C compiler "
  61             "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
  62   endif()
  63   if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
  64       ### gcc 4.[1-5] cannot compile ucontext on OSX
  65       message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
  66       set(HAVE_UCONTEXT_H 0)
  67   endif()
  68 endif() # NOT MSVC
  69
  70 ### SMPI vs. Fortran
  71 if ((NOT DEFINED enable_smpi OR enable_smpi) AND NOT APPLE) # smpi is enabled by default
  72   # Call enable_language(Fortran) in order to load the build rules for
  73   # this language, needed by teshsuite/smpi/mpich-test/.  Use
  74   # CMAKE_FORCE_Fortran_COMPILER to bypass checks for a working
  75   # compiler (smpiff don't exist at configure time).
  76   include(CMakeForceCompiler)
  77   if(NOT COMMAND CMAKE_FORCE_Fortran_COMPILER)
  78     MACRO(CMAKE_FORCE_Fortran_COMPILER compiler id)
  79       SET(CMAKE_Fortran_COMPILER "${compiler}")
  80       SET(CMAKE_Fortran_COMPILER_ID_RUN TRUE)
  81       SET(CMAKE_Fortran_COMPILER_ID ${id})
  82       SET(CMAKE_Fortran_COMPILER_WORKS TRUE)
  83       SET(CMAKE_Fortran_COMPILER_FORCED TRUE)
  84
  85       # Set old compiler id variables.
  86       IF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
  87         SET(CMAKE_COMPILER_IS_GNUG77 1)
  88       ENDIF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
  89     ENDMACRO(CMAKE_FORCE_Fortran_COMPILER)
  90   endif()
  91   CMAKE_FORCE_Fortran_COMPILER(smpiff smpiff)
  92   enable_language(Fortran OPTIONAL)
  93 endif()
  94
  95 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
  96 #     Build the version number      #
  97 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
  98
  99 set(SIMGRID_VERSION_MAJOR "3")
 100 set(SIMGRID_VERSION_MINOR "13")
 101 set(SIMGRID_VERSION_PATCH "0")
 102 set(SIMGRID_VERSION_EXTRA "-devel") # Extra words to add to version string (e.g. -rc1)
 103
 104 set(SIMGRID_VERSION_DATE  "2016") # Year for copyright information
 105
 106 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
 107   set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
 108 else()
 109   set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
 110 endif()
 111
 112 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
 113 set(SIMGRID_VERSION_BANNER "SIMGRID_VERSION_STRING\\nCopyright (c) 2004-${SIMGRID_VERSION_DATE}. The Simgrid Team.")
 114 if(release)
 115   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nRelease build")
 116 else()
 117   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nDevelopment build")
 118 endif()
 119
 120 set(libsimgrid_version "${release_version}")
 121 set(libsimgrid-java_version "${release_version}")
 122
 123 ### SET THE LIBRARY EXTENSION
 124 if(APPLE) #MAC
 125   set(LIB_EXE "dylib")
 126 else()
 127   if(WIN32) #WINDOWS
 128     set(LIB_EXE "a")
 129     set(BIN_EXE ".exe")
 130   else() #UNIX
 131     set(LIB_EXE "so")
 132   endif()
 133 endif()
 134
 135 exec_program("${CMAKE_LINKER} --version" OUTPUT_VARIABLE "LINKER_VERSION")
 136 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
 137
 138 ### Find programs and paths
 139 FIND_PROGRAM(GCOV_PATH gcov)
 140 include(FindPerl)
 141 if(NOT PERL_FOUND)
 142   message(FATAL_ERROR "Please install Perl to compile SimGrid.")
 143 endif()
 144
 145 if (APPLE)
 146   set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
 147   set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
 148 endif()
 149 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
 150
 151 ### Compute the include paths
 152 set(INCLUDES
 153   ${CMAKE_HOME_DIRECTORY}
 154   ${CMAKE_HOME_DIRECTORY}/include
 155   ${CMAKE_HOME_DIRECTORY}/src/include
 156   ${CMAKE_BINARY_DIR}
 157   ${CMAKE_BINARY_DIR}/include
 158   )
 159
 160 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
 161   set(INCLUDES ${INCLUDES} /usr/include/)
 162 endif()
 163
 164 ### Check 32bits or 64bits
 165 IF(CMAKE_SIZEOF_VOID_P EQUAL 4)
 166   SET(ARCH_32_BITS 1)
 167 ELSE()
 168   SET(ARCH_32_BITS 0)
 169 ENDIF()
 170
 171 if(WIN32)
 172
 173   #Need env INCLUDE
 174   set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
 175   set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
 176   string(REGEX REPLACE "/bin/gcc.*" "/include"  CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
 177   string(REGEX REPLACE "/bin/gcc.*" "/lib"  CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
 178   set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
 179   unset(CMAKE_INCLUDE_WIN)
 180
 181   set(_XBT_WIN32 1)
 182
 183 endif()
 184
 185 include_directories(${INCLUDES})
 186
 187 ### Setup Options
 188 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
 189
 190 ### Determine the assembly flavor that we need today
 191 include(CMakeDetermineSystem)
 192 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
 193   IF(${ARCH_32_BITS})
 194     message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
 195     set(PROCESSOR_i686 1)
 196   ELSE()
 197     message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
 198     set(PROCESSOR_x86_64 1)
 199   ENDIF()
 200   if (MSVC)
 201     message(STATUS "Disable fast raw contextes on Microsoft Visual.")
 202   else()
 203     set(HAVE_RAW_CONTEXTS 1)
 204   endif()
 205
 206 ENDIF()
 207
 208 include(CheckFunctionExists)
 209 include(CheckTypeSize)
 210 include(CheckIncludeFile)
 211 include(CheckIncludeFiles)
 212 include(CheckLibraryExists)
 213 include(CheckSymbolExists)
 214
 215 set(HAVE_GRAPHVIZ 0)
 216 include(FindGraphviz)
 217 include(FindLibSigc++)
 218
 219 set(HAVE_LUA 0)
 220 if(enable_lua)
 221   include(FindLuaSimgrid)
 222 endif()
 223
 224 set(HAVE_NS3 0)
 225 if(enable_ns3)
 226   include(FindNS3)
 227   if (NOT HAVE_NS3)
 228     message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
 229   endif()
 230 endif()
 231
 232 find_package(Boost 1.48)
 233 if(Boost_FOUND)
 234   include_directories(${Boost_INCLUDE_DIRS})
 235 else()
 236   if(APPLE)
 237     message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
 238   else()
 239     message(FATAL_ERROR "Failed to find Boost libraries."
 240                         "Did you install libboost-dev and libboost-context-dev?"
 241                         "(libboost-context-dev is optional)")
 242   endif()
 243 endif()
 244
 245 # Try again to see if we have libboost-context
 246 find_package(Boost 1.42 COMPONENTS context)
 247 set(Boost_FOUND 1) # We don't care of whether this component is missing
 248
 249 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
 250   # We should use feature detection for this instead:
 251   if (Boost_VERSION LESS 105600)
 252     message("Found Boost.Context API v1")
 253     set(HAVE_BOOST_CONTEXTS 1)
 254   else()
 255     message("Found Boost.Context API v2")
 256     set(HAVE_BOOST_CONTEXTS 2)
 257   endif()
 258 else()
 259   message ("   boost        : found.")
 260   message ("   boost-context: missing. Install libboost-context-dev for this optional feature.")
 261   set(HAVE_BOOST_CONTEXTS 0)
 262 endif()
 263
 264 # Checks for header libraries functions.
 265 CHECK_LIBRARY_EXISTS(execinfo backtrace              "" HAVE_BACKTRACE_IN_LIBEXECINFO)
 266 CHECK_LIBRARY_EXISTS(rt      clock_gettime           "" HAVE_POSIX_GETTIME)
 267
 268 CHECK_LIBRARY_EXISTS(pthread pthread_create          "" HAVE_PTHREAD)
 269 CHECK_LIBRARY_EXISTS(pthread sem_init                "" HAVE_SEM_INIT_LIB)
 270 CHECK_LIBRARY_EXISTS(pthread sem_open                "" HAVE_SEM_OPEN_LIB)
 271 CHECK_LIBRARY_EXISTS(pthread sem_timedwait           "" HAVE_SEM_TIMEDWAIT_LIB)
 272 CHECK_LIBRARY_EXISTS(pthread pthread_mutex_timedlock "" HAVE_MUTEX_TIMEDLOCK_LIB)
 273
 274
 275 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 276   set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
 277 elseif(MINGW)
 278   # Use the GNU version of unusual modifiers like PRIx64
 279   add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
 280   set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
 281 else()
 282   set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
 283 endif()
 284
 285 CHECK_INCLUDE_FILES("stdlib.h;stdarg.h;string.h;float.h" STDC_HEADERS)
 286 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_VALGRIND_H)
 287 CHECK_INCLUDE_FILE("sys/stat.h" HAVE_SYS_STAT_H)
 288 CHECK_INCLUDE_FILE("sys/ptrace.h" HAVE_SYS_PTRACE_H)
 289 CHECK_INCLUDE_FILE("windows.h" HAVE_WINDOWS_H)
 290 CHECK_INCLUDE_FILE("errno.h" HAVE_ERRNO_H)
 291 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
 292 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
 293 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
 294 CHECK_INCLUDE_FILE("sys/time.h" HAVE_SYS_TIME_H)
 295 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
 296 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
 297 CHECK_INCLUDE_FILE("time.h" HAVE_TIME_H)
 298 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
 299 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
 300
 301 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
 302 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
 303 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
 304 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
 305 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
 306
 307 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
 308 if(MINGW)
 309   # The detection of vasprintf fails on MinGW, assumingly because it's
 310   # defined as an inline function in stdio.h instead of a regular
 311   # function. So force the result to be 1 despite of the test.
 312   set(HAVE_VASPRINTF 1)
 313 endif()
 314
 315 CHECK_FUNCTION_EXISTS(makecontext HAVE_MAKECONTEXT)
 316 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
 317
 318 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
 319
 320 #Check if __thread is defined
 321 execute_process(
 322   COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c"
 323   WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 324   RESULT_VARIABLE HAVE_thread_storage_run
 325   )
 326
 327 if(HAVE_thread_storage_run)
 328   set(HAVE_THREAD_LOCAL_STORAGE 1)
 329 else()
 330   set(HAVE_THREAD_LOCAL_STORAGE 0)
 331 endif()
 332
 333 # Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
 334 IF(HAVE_MMAP AND
 335    NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND
 336    NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND
 337    NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND
 338    NOT  "${CMAKE_SYSTEM}" MATCHES "Darwin")
 339   SET(HAVE_MMAP 0)
 340   message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
 341 ENDIF()
 342
 343 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
 344   SET(HAVE_MMALLOC 1)
 345 else()
 346   SET(HAVE_MMALLOC 0)
 347 endif()
 348
 349 set(HAVE_UCONTEXT_CONTEXTS 0)
 350 set(HAVE_THREAD_CONTEXTS 0)
 351
 352 if(enable_jedule)
 353   set(HAVE_JEDULE 1)
 354 endif()
 355
 356 if(enable_mallocators)
 357   SET(MALLOCATOR_IS_WANTED 1)
 358 else()
 359   SET(MALLOCATOR_IS_WANTED 0)
 360 endif()
 361
 362 if(enable_model-checking AND HAVE_MMALLOC)
 363   SET(HAVE_MC 1)
 364   SET(MMALLOC_WANT_OVERRIDE_LEGACY 1)
 365   include(FindLibunwind)
 366   include(FindLibdw)
 367 else()
 368   if(enable_model-checking)
 369     message(STATUS "Warning: support for model-checking has been disabled because HAVE_MMALLOC is false")
 370   endif()
 371   SET(HAVE_MC 0)
 372   SET(HAVE_MMALLOC 0)
 373   SET(MMALLOC_WANT_OVERRIDE_LEGACY 0)
 374 endif()
 375
 376 if(enable_smpi)
 377   include(FindGFortran)
 378   SET(HAVE_SMPI 1)
 379   if("${CMAKE_SYSTEM}" MATCHES "Linux")
 380     SET(USE_LIBUTIL 0)
 381     SET(HAVE_PRIVATIZATION 1)
 382   elseif("${CMAKE_SYSTEM}" MATCHES "^FreeBSD")
 383     SET(USE_LIBUTIL 0)
 384     SET(HAVE_PRIVATIZATION 0)
 385   else()
 386     message (STATUS "Warning:  no support for SMPI automatic privatization on this platform")
 387     SET(HAVE_PRIVATIZATION 0)
 388   endif()
 389 endif()
 390
 391 #--------------------------------------------------------------------------------------------------
 392 ### Check for GNU dynamic linker
 393 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
 394 if (HAVE_DLFCN_H)
 395     execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c -ldl -o test_gnu_ld
 396       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 397       OUTPUT_VARIABLE HAVE_GNU_LD_compil
 398     )
 399     if(HAVE_GNU_LD_compil)
 400       set(HAVE_GNU_LD 0)
 401       message(STATUS "Warning: test program toward GNU ld failed to compile:")
 402       message(STATUS "${HAVE_GNU_LD_comp_output}")
 403     else()
 404
 405       execute_process(COMMAND ./test_gnu_ld
 406           WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 407           RESULT_VARIABLE HAVE_GNU_LD_run
 408           OUTPUT_VARIABLE var_exec
 409       )
 410
 411       if(NOT HAVE_GNU_LD_run)
 412         set(HAVE_GNU_LD 1)
 413         message(STATUS "We are using GNU dynamic linker")
 414       else()
 415         set(HAVE_GNU_LD 0)
 416         message(STATUS "Warning: error while checking for GNU ld:")
 417         message(STATUS "Test output: '${var_exec}'")
 418         message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
 419       endif()
 420       file(REMOVE test_gnu_ld)
 421     endif()
 422 endif()
 423
 424
 425 #--------------------------------------------------------------------------------------------------
 426 ### Initialize of CONTEXT THREADS
 427
 428 if(HAVE_PTHREAD)
 429   ### Test that we have a way to create semaphores
 430
 431   if(HAVE_SEM_OPEN_LIB)
 432     execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
 433     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 434     OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
 435     )
 436
 437     # Test sem_open by compiling:
 438     if(HAVE_SEM_OPEN_compil)
 439       set(HAVE_SEM_OPEN 0)
 440       message(STATUS "Warning: sem_open not compilable")
 441       message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
 442     else()
 443       set(HAVE_SEM_OPEN 1)
 444       message(STATUS "sem_open is compilable")
 445     endif()
 446
 447     # If we're not crosscompiling, we check by executing the program:
 448     if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
 449       execute_process(COMMAND ./sem_open
 450       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 451       RESULT_VARIABLE HAVE_SEM_OPEN_run
 452       OUTPUT_VARIABLE var_compil
 453       )
 454       if (NOT HAVE_SEM_OPEN_run)
 455         set(HAVE_SEM_OPEN 1)
 456         message(STATUS "sem_open is executable")
 457       else()
 458         set(HAVE_SEM_OPEN 0)
 459         if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
 460           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
 461         else()
 462           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
 463         endif()
 464         message(STATUS "Warning: sem_open not executable")
 465         message(STATUS "Compilation output: '${var_compil}'")
 466         message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
 467       endif()
 468     endif()
 469     file(REMOVE sem_open)
 470
 471   else()
 472     set(HAVE_SEM_OPEN 0)
 473   endif()
 474
 475   if(HAVE_SEM_INIT_LIB)
 476     execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
 477     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 478     RESULT_VARIABLE HAVE_SEM_INIT_run OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
 479
 480     # Test sem_init by compiling:
 481     if(HAVE_SEM_INIT_compil)
 482       set(HAVE_SEM_INIT 0)
 483       message(STATUS "Warning: sem_init not compilable")
 484       message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
 485     else()
 486       set(HAVE_SEM_INIT 1)
 487       message(STATUS "sem_init is compilable")
 488     endif()
 489
 490     # If we're not crosscompiling, we check by executing the program:
 491     if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
 492       execute_process(COMMAND ./sem_init
 493       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 494       RESULT_VARIABLE HAVE_SEM_INIT_run
 495       OUTPUT_VARIABLE var_compil
 496       )
 497       if (NOT HAVE_SEM_INIT_run)
 498         set(HAVE_SEM_INIT 1)
 499         message(STATUS "sem_init is executable")
 500       else()
 501         set(HAVE_SEM_INIT 0)
 502         if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
 503           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
 504         else()
 505           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
 506         endif()
 507         message(STATUS "Warning: sem_init not executable")
 508         message(STATUS "Compilation output: '${var_compil}'")
 509         message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
 510       endif()
 511     endif()
 512     file(REMOVE sem_init)
 513   endif()
 514
 515   if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
 516     message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
 517   endif()
 518
 519   ### Test that we have a way to timewait for semaphores
 520
 521   if(HAVE_SEM_TIMEDWAIT_LIB)
 522
 523     execute_process(
 524       COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_timedwait.c -lpthread"
 525       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 526       OUTPUT_VARIABLE HAVE_SEM_TIMEDWAIT_run
 527       )
 528
 529     if(HAVE_SEM_TIMEDWAIT_run)
 530       set(HAVE_SEM_TIMEDWAIT 0)
 531       message(STATUS "timedwait not compilable")
 532     else()
 533       set(HAVE_SEM_TIMEDWAIT 1)
 534       message(STATUS "timedwait is compilable")
 535     endif()
 536   endif()
 537
 538   ### HAVE_MUTEX_TIMEDLOCK
 539
 540   if(HAVE_MUTEX_TIMEDLOCK_LIB)
 541
 542     execute_process(
 543       COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_mutex_timedlock.c -lpthread"
 544       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 545       OUTPUT_VARIABLE HAVE_MUTEX_TIMEDLOCK_run
 546       )
 547
 548     if(HAVE_MUTEX_TIMEDLOCK_run)
 549       set(HAVE_MUTEX_TIMEDLOCK 0)
 550       message(STATUS "timedlock not compilable")
 551     else()
 552       message(STATUS "timedlock is compilable")
 553       set(HAVE_MUTEX_TIMEDLOCK 1)
 554     endif()
 555   endif()
 556 endif()
 557
 558 # This is needed for ucontext on MacOS X:
 559 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 560   add_definitions(-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE)
 561 endif()
 562
 563 if(WIN32)
 564   # We always provide our own implementation of ucontext on Windows.
 565   try_compile(HAVE_UCONTEXT
 566     ${CMAKE_BINARY_DIR}
 567     ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_AC_CHECK_MCSC.c
 568     COMPILE_DEFINITIONS -D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/src/include -I${CMAKE_HOME_DIRECTORY}/src/xbt
 569   )
 570 else()
 571   # We always provide our own implementation of ucontext on Windows.
 572   try_compile(HAVE_UCONTEXT
 573     ${CMAKE_BINARY_DIR}
 574     ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_AC_CHECK_MCSC.c)
 575 endif()
 576
 577 #If can have both context
 578
 579 if(HAVE_UCONTEXT)
 580   set(HAVE_UCONTEXT_CONTEXTS 1)
 581   message("-- Support for ucontext factory")
 582 endif()
 583
 584 if(HAVE_PTHREAD)
 585   set(HAVE_THREAD_CONTEXTS 1)
 586   message("-- Support for thread context factory")
 587 endif()
 588
 589 ###############
 590 ## GIT version check
 591 ##
 592 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
 593   execute_process(COMMAND git remote
 594   COMMAND head -n 1
 595   WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 596   OUTPUT_VARIABLE remote
 597   RESULT_VARIABLE ret
 598   )
 599   string(REPLACE "\n" "" remote "${remote}")
 600   #message(STATUS "Git remote: ${remote}")
 601   execute_process(COMMAND git config --get remote.${remote}.url
 602   WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 603   OUTPUT_VARIABLE url
 604   RESULT_VARIABLE ret
 605   )
 606   string(REPLACE "\n" "" url "${url}")
 607   #message(STATUS "Git url: ${url}")
 608   if(url)
 609     execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
 610     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 611     OUTPUT_VARIABLE GIT_VERSION
 612     RESULT_VARIABLE ret
 613     )
 614     string(REPLACE "\n" "" GIT_VERSION "${GIT_VERSION}")
 615     message(STATUS "Git version: ${GIT_VERSION}")
 616     execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
 617     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 618     OUTPUT_VARIABLE GIT_DATE
 619     RESULT_VARIABLE ret
 620     )
 621     string(REPLACE "\n" "" GIT_DATE "${GIT_DATE}")
 622     message(STATUS "Git date: ${GIT_DATE}")
 623     string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
 624
 625     execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
 626                     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 627                     OUTPUT_VARIABLE SIMGRID_GITHASH
 628                     RESULT_VARIABLE ret
 629                     )
 630     string(REPLACE "\n" "" SIMGRID_GITHASH "${SIMGRID_GITHASH}")
 631
 632   endif()
 633 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
 634   FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
 635 endif()
 636
 637 if(GIT_VERSION)
 638   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} at commit ${GIT_VERSION}")
 639 endif()
 640 if(GIT_DATE)
 641   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} (${GIT_DATE})")
 642 endif()
 643 #--------------------------------------------------------------------------------------------------
 644
 645 set(makecontext_CPPFLAGS_2 "")
 646 if(HAVE_MAKECONTEXT OR WIN32)
 647   set(makecontext_CPPFLAGS "-DTEST_makecontext")
 648   if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 649     set(makecontext_CPPFLAGS_2 "-D_XOPEN_SOURCE=700")
 650   endif()
 651
 652   if(WIN32)
 653     if(ARCH_32_BITS)
 654       set(makecontext_CPPFLAGS "-DTEST_makecontext -D_I_X86_")
 655     else()
 656       set(makecontext_CPPFLAGS "-DTEST_makecontext -D_AMD64_")
 657     endif()
 658     set(makecontext_CPPFLAGS_2 "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/src/include -I${CMAKE_HOME_DIRECTORY}/src/xbt")
 659   endif()
 660
 661   file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
 662
 663   if(CMAKE_CROSSCOMPILING)
 664     set(RUN_makecontext_VAR "cross")
 665     set(COMPILE_makecontext_VAR "cross")
 666   else()
 667     try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
 668       ${CMAKE_BINARY_DIR}
 669       ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
 670       COMPILE_DEFINITIONS "${makecontext_CPPFLAGS} ${makecontext_CPPFLAGS_2}"
 671       )
 672   endif()
 673
 674   if(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
 675     file(READ ${CMAKE_BINARY_DIR}/conftestval MAKECONTEXT_ADDR_SIZE)
 676     string(REPLACE "\n" "" MAKECONTEXT_ADDR_SIZE "${MAKECONTEXT_ADDR_SIZE}")
 677     string(REGEX MATCH ;^.*,;MAKECONTEXT_ADDR "${MAKECONTEXT_ADDR_SIZE}")
 678     string(REGEX MATCH ;,.*$; MAKECONTEXT_SIZE "${MAKECONTEXT_ADDR_SIZE}")
 679     string(REPLACE "," "" makecontext_addr "${MAKECONTEXT_ADDR}")
 680     string(REPLACE "," "" makecontext_size "${MAKECONTEXT_SIZE}")
 681     set(pth_skaddr_makecontext "#define pth_skaddr_makecontext(skaddr,sksize) (${makecontext_addr})")
 682     set(pth_sksize_makecontext "#define pth_sksize_makecontext(skaddr,sksize) (${makecontext_size})")
 683   else()
 684     # message(FATAL_ERROR "makecontext is not compilable")
 685   endif()
 686 endif()
 687
 688 #--------------------------------------------------------------------------------------------------
 689
 690 ### check for stackgrowth
 691 if (NOT CMAKE_CROSSCOMPILING)
 692   try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
 693     ${CMAKE_BINARY_DIR}
 694     ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
 695     RUN_OUTPUT_VARIABLE stack
 696     COPY_FILE test_stackgrowth
 697   )
 698 endif()
 699 if("${stack}" STREQUAL "down")
 700   set(PTH_STACKGROWTH "-1")
 701 elseif("${stack}" STREQUAL "up")
 702   set(PTH_STACKGROWTH "1")
 703 else()
 704   if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
 705     set(PTH_STACKGROWTH "-1")
 706   elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
 707     set(PTH_STACKGROWTH "-1")
 708   else()
 709     message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
 710   endif()
 711 endif()
 712 # If the test ran well, remove the test binary
 713 execute_process(COMMAND ${CMAKE_COMMAND} -E remove test_stackgrowth)
 714
 715 ###############
 716 ## System checks
 717 ##
 718
 719 ### check for addr2line
 720 find_path(ADDR2LINE NAMES addr2line     PATHS NO_DEFAULT_PATHS  )
 721 if(ADDR2LINE)
 722   set(ADDR2LINE "${ADDR2LINE}/addr2line")
 723 endif()
 724
 725 ### File to create
 726
 727 configure_file("${CMAKE_HOME_DIRECTORY}/src/context_sysv_config.h.in"
 728   "${CMAKE_BINARY_DIR}/src/context_sysv_config.h" @ONLY IMMEDIATE)
 729
 730 SET( CMAKEDEFINE "#cmakedefine" )
 731 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
 732 configure_file("${CMAKE_BINARY_DIR}/src/internal_config.h" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
 733 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h" @ONLY IMMEDIATE)
 734
 735 set(top_srcdir "${CMAKE_HOME_DIRECTORY}")
 736 set(srcdir "${CMAKE_HOME_DIRECTORY}/src")
 737 set(bindir "${CMAKE_BINARY_DIR}")
 738
 739 ### Script used when simgrid is installed
 740 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
 741 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
 742 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
 743 set(libdir ${exec_prefix}/lib)
 744 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
 745 if(NS3_LIBRARY_PATH)
 746   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 747 endif()
 748 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
 749
 750 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH)
 751 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
 752 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/bin/smpicc @ONLY)
 753 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/bin/smpicxx @ONLY)
 754 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/bin/smpiff @ONLY)
 755 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/bin/smpif90 @ONLY)
 756 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/bin/smpirun @ONLY)
 757
 758 ### Script used when simgrid is compiling
 759 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
 760 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
 761 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
 762 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
 763 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
 764 if(NS3_LIBRARY_PATH)
 765   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 766 endif()
 767 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
 768 set(libdir "${CMAKE_BINARY_DIR}/lib")
 769
 770 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc @ONLY)
 771 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx @ONLY)
 772 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff @ONLY)
 773 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90 @ONLY)
 774 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun @ONLY)
 775
 776 set(top_builddir ${CMAKE_HOME_DIRECTORY})
 777
 778 if(NOT WIN32)
 779   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicc)
 780   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicxx)
 781   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpiff)
 782   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpif90)
 783   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpirun)
 784   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc)
 785   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx)
 786   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff)
 787   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90)
 788   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun)
 789 endif()
 790
 791 set(generated_headers_to_install
 792   ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
 793   ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
 794   )
 795
 796 set(generated_headers
 797   ${CMAKE_CURRENT_BINARY_DIR}/src/context_sysv_config.h
 798   ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h
 799   )
 800
 801 set(generated_files_to_clean
 802   ${generated_headers}
 803   ${generated_headers_to_install}
 804   ${CMAKE_BINARY_DIR}/bin/smpicc
 805   ${CMAKE_BINARY_DIR}/bin/smpicxx
 806   ${CMAKE_BINARY_DIR}/bin/smpiff
 807   ${CMAKE_BINARY_DIR}/bin/smpif90
 808   ${CMAKE_BINARY_DIR}/bin/smpirun
 809   ${CMAKE_BINARY_DIR}/bin/colorize
 810   ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
 811   ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
 812   )
 813
 814 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
 815   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
 816   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
 817   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
 818   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
 819   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
 820   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
 821   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
 822   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
 823   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
 824   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
 825   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
 826   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
 827   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
 828
 829   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
 830   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
 831   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
 832   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
 833   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
 834   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
 835   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
 836   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
 837   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
 838   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
 839   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
 840   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
 841   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
 842   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
 843   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
 844   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
 845   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
 846   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
 847   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
 848   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
 849   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
 850   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
 851   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
 852   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
 853   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
 854   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
 855   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
 856   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
 857   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
 858   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
 859   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
 860   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
 861   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
 862   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
 863   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
 864
 865   set(generated_files_to_clean
 866     ${generated_files_to_clean}
 867     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
 868     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
 869     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
 870     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
 871     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
 872     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
 873     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
 874     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
 875     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
 876     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
 877     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
 878     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
 879     ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
 880     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
 881     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
 882     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
 883     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
 884     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
 885     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
 886     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
 887     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
 888     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
 889     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
 890     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
 891     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
 892     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
 893     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
 894     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
 895     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
 896     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
 897     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
 898     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
 899     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
 900     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
 901     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
 902     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
 903     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
 904     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
 905     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
 906     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
 907     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
 908     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
 909     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
 910     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
 911     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
 912     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
 913     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
 914     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
 915     )
 916 endif()
 917
 918 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
 919   "${generated_files_to_clean}")
 920
 921 ### Define source packages for Libs
 922 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
 923
 924 ### Build some Maintainer files
 925 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
 926 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
 927
 928 ### Setup gcc & clang flags
 929 if (NOT MSVC)
 930   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
 931 endif()
 932
 933 ### Make Libs
 934 if(NOT WIN32)
 935   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
 936 else()
 937   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
 938 endif()
 939
 940 if(enable_java)
 941   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
 942 endif()
 943
 944 ### Make tests
 945 if(enable_memcheck_xml)
 946   set(enable_memcheck true)
 947 endif()
 948
 949 INCLUDE(CTest)
 950 ENABLE_TESTING()
 951 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
 952 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
 953
 954 ### Define subdirectories
 955 foreach(cmakefile ${CMAKEFILES_TXT})
 956   string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
 957   add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
 958 endforeach()
 959
 960 ### Setup the distrib
 961 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
 962
 963 ### Build the doc (Windows downloads the doc instead of regenerating)
 964 #
 965 if(NOT WIN32)
 966   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
 967 else()
 968   find_program(WGET_PROGRAM  NAMES wget)
 969   message(STATUS "wget: ${WGET_PROGRAM}")
 970   if(WGET_PROGRAM)
 971     ADD_CUSTOM_TARGET(documentation
 972       COMMENT "Downloading the SimGrid documentation..."
 973       COMMAND ${WGET_PROGRAM} -r -np -nH -nd http://simgrid.gforge.inria.fr/simgrid/${release_version}/doc/
 974       WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/doc/html
 975     )
 976   endif()
 977 endif()
 978
 979 ### Print the result of configuration
 980 message("")
 981 message("______________________________________________________________________")
 982 message("______________________________________________________________________ DEBUG")
 983 message("CMAKE_HOME_DIRECTORY ........: ${CMAKE_HOME_DIRECTORY}")
 984 message("")
 985 message("PTH_STACKGROWTH .............: ${PTH_STACKGROWTH}")
 986 message("HAVE_VA_COPY ................: ${HAVE_VA_COPY}")
 987 message("")
 988 message("\#define pth_skaddr_makecontext(skaddr,sksize) (${makecontext_addr})")
 989 message("\#define pth_sksize_makecontext(skaddr,sksize) (${makecontext_size})")
 990 message("\#define __VA_COPY_USE          ${__VA_COPY_USE}")
 991 message("HAVE_UCONTEXT ...............: ${HAVE_UCONTEXT}")
 992 message("")
 993 message("HAVE_PTHREAD ................: ${HAVE_PTHREAD}")
 994 message("HAVE_SEM_INIT ...............: ${HAVE_SEM_INIT_LIB}")
 995 message("HAVE_SEM_TIMEDWAIT ..........: ${HAVE_SEM_TIMEDWAIT_LIB}")
 996 message("HAVE_MUTEX_TIMEDLOCK ........: ${HAVE_MUTEX_TIMEDLOCK_LIB}")
 997 message("HAVE_POSIX_GETTIME ..........: ${HAVE_POSIX_GETTIME}")
 998 message("")
 999 message("STDC_HEADERS ................: ${STDC_HEADERS}")
1000 message("HAVE_VALGRIND_VALGRIND_H ....: ${HAVE_VALGRIND_VALGRIND_H}")
1001 message("HAVE_SYS_STAT_H .............: ${HAVE_SYS_STAT_H}")
1002 message("HAVE_WINDOWS_H ..............: ${HAVE_WINDOWS_H}")
1003 message("HAVE_ERRNO_H ................: ${HAVE_ERRNO_H}")
1004 message("HAVE_UNISTD_H ...............: ${HAVE_UNISTD_H}")
1005 message("HAVE_EXECINFO_H .............: ${HAVE_EXECINFO_H}")
1006 message("HAVE_SIGNAL_H ...............: ${HAVE_SIGNAL_H}")
1007 message("HAVE_SYS_TIME_H .............: ${HAVE_SYS_TIME_H}")
1008 message("HAVE_TIME_H .................: ${HAVE_TIME_H}")
1009 message("HAVE_DLFCN_H ................: ${HAVE_DLFCN_H}")
1010
1011 message("")
1012 message("HAVE_GETTIMEOFDAY ...........: ${HAVE_GETTIMEOFDAY}")
1013 message("HAVE_NANOSLEEP ..............: ${HAVE_NANOSLEEP}")
1014 message("HAVE_GETDTABLESIZE ..........: ${HAVE_GETDTABLESIZE}")
1015 message("HAVE_SYSCONF ................: ${HAVE_SYSCONF}")
1016 message("HAVE_POPEN ..................: ${HAVE_POPEN}")
1017 message("HAVE_MAKECONTEXT ............: ${HAVE_MAKECONTEXT}")
1018 message("HAVE_VASPRINTF ..............: ${HAVE_VASPRINTF}")
1019 message("HAVE_MMAP ...................: ${HAVE_MMAP}")
1020 message("HAVE_PRIVATIZATION ..........: ${HAVE_PRIVATIZATION}")
1021 message("HAVE_PROCESS_VM_READV .......: ${HAVE_PROCESS_VM_READV}")
1022 message("HAVE_THREAD_LOCAL_STORAGE ...: ${HAVE_THREAD_LOCAL_STORAGE}")
1023 message("HAVE_MMALLOC ................: ${HAVE_MMALLOC}")
1024 message("")
1025 message("HAVE_THREAD_CONTEXTS .............: ${HAVE_THREAD_CONTEXTS}")
1026 message("HAVE_UCONTEXT_CONTEXTS ............: ${HAVE_UCONTEXT_CONTEXTS}")
1027 message("______________________________________________________________________")
1028 message("______________________________________________________________________ DEBUG END")
1029 message("")
1030
1031
1032 message("\nConfiguration of package `simgrid':")
1033 message("        Build Name ..................: ${BUILDNAME}")
1034 message("        Cmake Generator .............: ${CMAKE_GENERATOR}")
1035 message("        SITE ........................: ${SITE}")
1036 if(release)
1037   message("        Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
1038 else()
1039   message("        Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
1040 endif()
1041 message("")
1042 message("        Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
1043 message("                version .............: ${CMAKE_C_COMPILER_VERSION}")
1044 message("                is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
1045 message("        Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
1046 message("                version .............: ${CMAKE_CXX_COMPILER_VERSION}")
1047 if(${Java_FOUND})
1048   message("        Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
1049   message("                version .............: ${Java_VERSION_STRING}")
1050 if(${SWIG_FOUND})
1051   message("                SWIG ................: Version ${SWIG_VERSION} found.")
1052 else()
1053   message("                SWIG ................: Missing.")
1054 endif()
1055 endif()
1056 if(CMAKE_Fortran_COMPILER)
1057   message("        Compiler: Fortran ...........: ${CMAKE_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
1058   message("                version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
1059 endif()
1060 message("        Linker: .....................: ${CMAKE_LINKER}")
1061 message("                version .............: ${LINKER_VERSION}")
1062 message("        Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
1063 message("")
1064 message("        CFlags ......................: ${CMAKE_C_FLAGS}")
1065 message("        CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
1066 message("        LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
1067 message("        with LTO ....................: ${enable_lto}")
1068 message("")
1069
1070 if (HAVE_NS3)
1071   message("        Compile NS-3 ................: yes (path: ${NS3_PATH})")
1072 else()
1073   message("        Compile NS-3 ................: NO  (hint: ${NS3_HINT})")
1074 endif()
1075
1076 if (${Java_FOUND})
1077   message("        Compile Java ................: yes")
1078   message("          Native lib in jar .........: ${enable_lib_in_jar}")
1079 else()
1080   message("        Compile Java ................: NO")
1081 endif()
1082 message("        Compile Lua .................: ${HAVE_LUA}")
1083 message("        Compile Smpi ................: ${HAVE_SMPI}")
1084 message("        Compile MPI testsuite .......: ${enable_smpi_MPICH3_testsuite}")
1085 message("        Compile Smpi f77 ............: ${SMPI_FORTRAN}")
1086 message("        Compile Smpi f90 ............: ${SMPI_FORTRAN}")
1087 message("        Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
1088 message("")
1089 message("        Maintainer mode .............: ${enable_maintainer_mode}")
1090 message("        Documentation................: ${enable_documentation}")
1091 message("        Model checking ..............: ${HAVE_MC}")
1092 message("        Tracing mode ................: ${enable_tracing}")
1093 message("        Jedule  mode ................: ${enable_jedule}")
1094 message("        Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
1095 message("        Sigc++ mode .................: ${SIMGRID_HAVE_LIBSIG}")
1096 message("        Mallocators .................: ${enable_mallocators}")
1097 message("")
1098 message("        Simgrid dependencies ........: ${SIMGRID_DEP}")
1099 message("")
1100 message("        INSTALL_PREFIX ..............: ${CMAKE_INSTALL_PREFIX}")
1101
1102 exec_program("${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/" OUTPUT_VARIABLE OKIDOKI)
1103 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build  "GIT version : ${GIT_VERSION}\n")
1104 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release     : simgrid-${release_version}\n")
1105
1106 INCLUDE(Dart)