CMakeLists.txt

   1 # Build the version number
   2
   3 set(SIMGRID_VERSION_MAJOR "3")
   4 set(SIMGRID_VERSION_MINOR "27")
   5 set(SIMGRID_VERSION_PATCH "1") # odd => git branch; even => stable release or released snapshot
   6
   7 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
   8   set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
   9 else()
  10   set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
  11 endif()
  12
  13 message(STATUS "Configuring SimGrid v${release_version}")
  14
  15 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}")
  16
  17 set(libsimgrid_version "${release_version}")
  18 set(libsimgrid-java_version "${release_version}")
  19
  20 # Basic checks on cmake
  21 cmake_minimum_required(VERSION 3.5)
  22 #for lto, to avoid warning (should be removed when switching to requiring cmake >= 3.9)
  23 if(NOT CMAKE_VERSION VERSION_LESS "3.9")
  24   cmake_policy(SET CMP0069 NEW)
  25 endif()
  26 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
  27 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
  28
  29 project(simgrid C CXX)
  30
  31 # customizable installation directories
  32 include(GNUInstallDirs)
  33
  34 ## Save compiler flags preset with environment variables CFLAGS or CXXFLAGS;
  35 ## they will used within smpicc, smpicxx.
  36 ## Do it early so that we get their genuine values. The same will be done later for Fortran.
  37 string(REGEX REPLACE " *-f[a-z]+-prefix-map=[^ ]*" "" SMPI_C_FLAGS "${CMAKE_C_FLAGS}")
  38 string(REGEX REPLACE " *-f[a-z]+-prefix-map=[^ ]*" "" SMPI_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
  39
  40 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
  41 #     Check for the compiler        #
  42 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
  43 ##
  44 ## Check the C/C++ standard that we need
  45 ##   See also tools/cmake/Flags.cmake that sets our paranoid warning flags
  46 INCLUDE(CheckCCompilerFlag)
  47 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
  48
  49 ## Request full debugging flags
  50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
  51 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
  52
  53 if (CMAKE_COMPILER_IS_GNUCC)
  54   if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "5.0")
  55     message(FATAL_ERROR
  56             "SimGrid needs at least g++ version 5.0 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
  57             "You need a sufficient support of c++14 to compile SimGrid.")
  58   endif()
  59 endif()
  60
  61 ## We need a decent support of the C++14 and C11 standards
  62 set(CMAKE_CXX_STANDARD 14)
  63 set(CMAKE_CXX_STANDARD_REQUIRED ON)
  64
  65 set(CMAKE_C_STANDARD 11)
  66 set(CMAKE_C_STANDARD_REQUIRED ON)
  67
  68 if (CMAKE_C_COMPILER_ID STREQUAL "Intel" AND CMAKE_C11_EXTENSION_COMPILE_OPTION STREQUAL "-std=c11")
  69   set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
  70 endif()
  71
  72 ### Check threading support
  73 set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
  74 find_package(Threads)
  75
  76 ### Setup Options
  77 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
  78
  79 ### SMPI vs. Fortran
  80 if ((NOT DEFINED enable_smpi) OR enable_smpi)
  81   # First unset the compiler in case we're re-running cmake over a previous
  82   # configuration where it was saved as smpiff
  83   unset(CMAKE_Fortran_COMPILER)
  84
  85   SET(SMPI_FORTRAN 0)
  86   if(enable_fortran)
  87     enable_language(Fortran OPTIONAL)
  88   endif()
  89
  90   if(CMAKE_Fortran_COMPILER)
  91
  92     # Fortran compiler detected: save it, then replace by smpiff
  93     set(SMPI_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
  94
  95         # Set flags/libs to be used in smpiff
  96     if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
  97       set(SMPI_Fortran_FLAGS "\"-fpic\" \"-ff2c\" \"-fno-second-underscore\"")
  98       set(SMPI_Fortran_LIBS "\"-lgfortran\"")
  99       set(SMPI_GFORTRAN 1)
 100     elseif(CMAKE_Fortran_COMPILER_ID MATCHES "Intel")
 101       set(SMPI_Fortran_FLAGS "\"-fPIC\" \"-nofor-main\"")
 102       set(SMPI_Fortran_LIBS "\"-lifcore\"")
 103       set(SMPI_IFORT 1)
 104     elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI|Flang") # flang
 105       set(SMPI_Fortran_FLAGS "\"-fPIC\"")
 106       set(SMPI_Fortran_LIBS "")
 107       set(SMPI_FLANG 1)
 108     endif()
 109     string(REGEX REPLACE " *-f[a-z]+-prefix-map=[^ ]*" "" SMPI_Fortran_FLAGS "${SMPI_Fortran_FLAGS} ${CMAKE_Fortran_FLAGS}")
 110
 111     ## Request debugging flags for Fortran too
 112     set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
 113
 114     set(SMPI_FORTRAN 1)
 115   endif(CMAKE_Fortran_COMPILER)
 116
 117 endif()
 118
 119 ### SET THE LIBRARY EXTENSION
 120 if(APPLE)
 121   set(LIB_EXE "dylib")
 122 elseif(WIN32)
 123   set(LIB_EXE "a")
 124   set(BIN_EXE ".exe")
 125 else()
 126   set(LIB_EXE "so")
 127 endif()
 128
 129 execute_process(COMMAND ${CMAKE_LINKER} -v OUTPUT_VARIABLE LINKER_VERSION ERROR_VARIABLE LINKER_VERSION)
 130 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
 131
 132 ### Find programs and paths
 133 FIND_PROGRAM(GCOV_PATH gcov)
 134 include(FindPerl)
 135 if(NOT PERL_FOUND)
 136   message(FATAL_ERROR "Please install Perl to compile SimGrid.")
 137 endif()
 138
 139 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
 140 if(CMAKE_VERSION VERSION_LESS "3.12")
 141   set(PythonInterp_FIND_VERSION 3)
 142   set(PythonInterp_FIND_VERSION_COUNT 1)
 143   set(PythonInterp_FIND_VERSION_MAJOR 3)
 144   include(FindPythonInterp)
 145   if(NOT PYTHONINTERP_FOUND)
 146     message(FATAL_ERROR "Please install Python (version 3 or higher) to compile SimGrid.")
 147   endif()
 148 else()
 149   find_package(Python3 COMPONENTS Interpreter Development)
 150   if(NOT Python3_Interpreter_FOUND)
 151     message(FATAL_ERROR "Please install Python (version 3 or higher) to compile SimGrid.")
 152   endif()
 153   set(PYTHON_EXECUTABLE ${Python3_EXECUTABLE})
 154 endif()
 155
 156 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
 157
 158 ### Compute the include paths
 159
 160 # Only include public headers by default
 161 include_directories(
 162    ${CMAKE_BINARY_DIR}/include
 163    ${CMAKE_HOME_DIRECTORY}/include
 164 )
 165
 166 # Compute the ones that should be added when compiling the library
 167 set(INTERNAL_INCLUDES
 168   ${CMAKE_BINARY_DIR}
 169   ${CMAKE_HOME_DIRECTORY}
 170   ${CMAKE_HOME_DIRECTORY}/src/include
 171   )
 172
 173 if(enable_smpi)
 174   set (INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_HOME_DIRECTORY}/src/smpi/include)
 175 endif()
 176
 177 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
 178   set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} /usr/include/)
 179 endif()
 180
 181 if(WIN32)
 182   set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
 183   set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
 184   string(REGEX REPLACE "/bin/gcc.*" "/include"  CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
 185   string(REGEX REPLACE "/bin/gcc.*" "/lib"  CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
 186   set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_INCLUDE_WIN})
 187   unset(CMAKE_INCLUDE_WIN)
 188 endif()
 189
 190 # library dependency cannot start with a space (CMP0004), so initialize it with something that is never deactivated.
 191 set(SIMGRID_DEP "-lm")
 192
 193 ### Determine the assembly flavor that we need today
 194 set(HAVE_RAW_CONTEXTS 0)
 195 include(CMakeDetermineSystem)
 196 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
 197   IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
 198     message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
 199     set(SIMGRID_PROCESSOR_i686 1)
 200     set(SIMGRID_PROCESSOR_x86_64 0)
 201   ELSE()
 202     message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
 203     set(SIMGRID_PROCESSOR_i686 0)
 204     set(SIMGRID_PROCESSOR_x86_64 1)
 205   ENDIF()
 206   if (WIN32)
 207     message(STATUS "Disable fast raw contexts on Windows.")
 208   elseif(CMAKE_SIZEOF_VOID_P EQUAL 4 AND CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
 209     message(STATUS "Disable fast raw contexts on x32 ABI.")
 210   else()
 211     set(HAVE_RAW_CONTEXTS 1)
 212   endif()
 213 ELSE()
 214   set(SIMGRID_PROCESSOR_i686 0)
 215   set(SIMGRID_PROCESSOR_x86_64 0)
 216 ENDIF()
 217
 218 include(CheckFunctionExists)
 219 include(CheckTypeSize)
 220 include(CheckIncludeFile)
 221 include(CheckIncludeFiles)
 222 include(CheckLibraryExists)
 223 include(CheckSymbolExists)
 224
 225 set(HAVE_GRAPHVIZ 0)
 226 set(SIMGRID_HAVE_LUA 0)
 227 if(minimal-bindings)
 228   message(STATUS "Don't even look for graphviz nor lua, as we build minimal binding libraries.")
 229 else()
 230   include(FindGraphviz)
 231   if(enable_lua)
 232     include(FindLuaSimgrid)
 233   endif()
 234 endif()
 235
 236 set(SIMGRID_HAVE_NS3 0)
 237 if(enable_ns3)
 238   include(FindNS3)
 239   if (SIMGRID_HAVE_NS3)
 240     if (NS3_VERSION VERSION_LESS "3.28")
 241       message(FATAL_ERROR "SimGrid needs at least ns-3.28. Please upgrade or disable that cmake option.")
 242     endif()
 243     set(SIMGRID_HAVE_NS3 1)
 244     foreach(lib core csma point-to-point internet network applications wifi)
 245       set(SIMGRID_DEP "${SIMGRID_DEP} -lns${NS3_VERSION}-${lib}${NS3_SUFFIX}")
 246     endforeach()
 247   else()
 248     message(FATAL_ERROR "Cannot find ns-3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
 249   endif()
 250 endif()
 251
 252 set(SIMGRID_HAVE_MSG 0)
 253 if(enable_msg)
 254   set(SIMGRID_HAVE_MSG 1)
 255 endif()
 256
 257 if(WIN32)
 258   set(Boost_USE_STATIC_LIBS 1)
 259 endif()
 260
 261 set(HAVE_PAPI 0)
 262 if(enable_smpi_papi)
 263   include(FindPAPI)
 264   if (NOT HAVE_PAPI)
 265     message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
 266   endif()
 267 endif()
 268
 269 # But we do need the core of Boost
 270 # cmake before 3.13.1 does not know about stacktrace components. Fix it.
 271 # Usable components: https://www.boost.org/doc/libs/1_65_1/doc/html/stacktrace/configuration_and_build.html
 272 set(_Boost_STACKTRACE_HEADERS           "boost/stacktrace.hpp")
 273 set(_Boost_STACKTRACE_BACKTRACE_HEADERS "boost/stacktrace.hpp")
 274 set(_Boost_STACKTRACE_ADDR2LINE_HEADERS "boost/stacktrace.hpp")
 275
 276   if(minimal-bindings) # When we want a minimal jarfile, don't even search for boost optional components
 277     message(STATUS "Don't even look for boost optional components, as we build minimal binding libraries.")
 278     find_package(Boost 1.48)
 279   else()
 280     find_package(Boost 1.59 OPTIONAL_COMPONENTS context stacktrace_backtrace stacktrace_addr2line)
 281   endif()
 282   if(Boost_FOUND)
 283     include_directories(${Boost_INCLUDE_DIRS})
 284     message(STATUS "Mandatory components found. SimGrid is compilable.")
 285     if (NOT minimal-bindings)
 286       message(STATUS "Looking for optional Boost components:")
 287       set(Boost_FOUND 1) # These components are optionals
 288       CHECK_INCLUDE_FILE("backtrace.h" HAVE_BACKTRACE_H) # check that backtrace is actually possible
 289       if (Boost_STACKTRACE_BACKTRACE_FOUND AND HAVE_BACKTRACE_H)
 290         message (STATUS "  stacktrace: found the fast 'backtrace' implementation. Activating human-readable stack traces.")
 291         set(HAVE_BOOST_STACKTRACE_BACKTRACE 1)
 292       else()
 293         set(HAVE_BOOST_STACKTRACE_BACKTRACE 0)
 294         if (Boost_STACKTRACE_ADDR2LINE_FOUND)
 295           message (STATUS "  stacktrace: found the slow 'addr2line' implementation. Activating human-readable stack traces.")
 296           set(HAVE_BOOST_STACKTRACE_ADDR2LINE 1)
 297         else()
 298           message (STATUS "  stacktrace: MISSING. Install libboost-stacktrace-dev to display the stacktraces.")
 299           set(HAVE_BOOST_STACKTRACE_ADDR2LINE 0)
 300         endif()
 301       endif()
 302
 303       if(Boost_CONTEXT_FOUND)
 304         message (STATUS "  context: found. Activating Boost contexts.")
 305         set(HAVE_BOOST_CONTEXTS 1)
 306       else()
 307         message (STATUS "  context: MISSING. Install libboost-context-dev for this optional feature.")
 308         set(HAVE_BOOST_CONTEXTS 0)
 309       endif()
 310     endif()
 311   else()
 312     if(APPLE)
 313       message(FATAL_ERROR "Boost libraries not found. Try to install them with 'sudo fink install boost1.53.nopython' (check the exact name with 'fink list boost') or 'sudo brew install boost'")
 314     else()
 315       find_package(Boost 1.48) #try without optional libraries
 316       if(NOT Boost_FOUND)
 317         message(FATAL_ERROR "Boost libraries not found. Install libboost-dev (>= 1.48.0).")
 318       else()
 319         include_directories(${Boost_INCLUDE_DIRS})
 320         message(STATUS "Mandatory components found. SimGrid is compilable.")
 321       endif()
 322     endif()
 323   endif()
 324
 325 # Checks for header libraries functions.
 326 CHECK_LIBRARY_EXISTS(rt      clock_gettime           "" HAVE_POSIX_GETTIME)
 327 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np  "" HAVE_PTHREAD_SETAFFINITY)
 328 CHECK_INCLUDE_FILE("pthread_np.h" HAVE_PTHREAD_NP_H) # for pthread_setaffinity_np() on FreeBSD
 329
 330 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 331   set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
 332 elseif(MINGW)
 333   # Use the GNU version of unusual modifiers like PRIx64
 334   add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
 335   set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
 336 else()
 337   set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
 338 endif()
 339
 340 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
 341 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
 342 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
 343
 344 CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
 345 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
 346 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
 347 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
 348 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
 349 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
 350 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
 351
 352 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
 353 if(MINGW)
 354   # The detection of vasprintf fails on MinGW, assumingly because it's
 355   # defined as an inline function in stdio.h instead of a regular
 356   # function. So force the result to be 1 despite of the test.
 357   set(HAVE_VASPRINTF 1)
 358 endif()
 359
 360 CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
 361 CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
 362 if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
 363   set(SG_HAVE_SENDFILE 1)
 364 else()
 365   set(SG_HAVE_SENDFILE 0)
 366 endif()
 367
 368 if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
 369   message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
 370   set(enable_model-checking FALSE)
 371 endif()
 372
 373 if(enable_model-checking AND minimal-bindings)
 374   message(FATAL_ERROR "Compile-time option 'minimal-bindings' cannot be enabled with 'model-checking'")
 375 endif()
 376
 377 if(HAVE_MMAP)
 378   SET(HAVE_MMALLOC 1)
 379 else()
 380   SET(HAVE_MMALLOC 0)
 381   if(enable_model-checking)
 382     message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
 383   endif()
 384   SET(enable_model-checking 0)
 385 endif()
 386
 387 if(enable_jedule)
 388   set(SIMGRID_HAVE_JEDULE 1)
 389 else()
 390   set(SIMGRID_HAVE_JEDULE 0)
 391 endif()
 392
 393 if(enable_mallocators)
 394   SET(SIMGRID_HAVE_MALLOCATOR 1)
 395 else()
 396   SET(SIMGRID_HAVE_MALLOCATOR 0)
 397 endif()
 398
 399 if(enable_model-checking)
 400   include(FindLibunwind)
 401   if(HAVE_LIBUNWIND)
 402     SET(SIMGRID_DEP "${SIMGRID_DEP} ${LIBUNWIND_LIBRARIES}")
 403   else()
 404     message(FATAL_ERROR "Please install libunwind-dev libdw-dev libelf-dev libevent-dev if you want to compile the SimGrid model checker.")
 405   endif()
 406   find_package(Libdw REQUIRED)
 407   find_package(Libelf REQUIRED)
 408   find_package(Libevent REQUIRED)
 409   include_directories(${LIBDW_INCLUDE_DIR} ${LIBELF_INCLUDE_DIR} ${LIBEVENT_INCLUDE_DIR})
 410   set(SIMGRID_DEP "${SIMGRID_DEP} ${LIBEVENT_LIBRARIES} ${LIBELF_LIBRARIES} ${LIBDW_LIBRARIES}")
 411   set(SIMGRID_HAVE_MC 1)
 412   if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_java)
 413     message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling the Java bindings.")
 414     set(enable_java FALSE)
 415   endif()
 416 else()
 417   SET(SIMGRID_HAVE_MC 0)
 418   set(HAVE_MMALLOC 0)
 419 endif()
 420 mark_as_advanced(PATH_LIBDW_H)
 421 mark_as_advanced(PATH_LIBDW_LIB)
 422
 423 if(enable_java AND NOT enable_msg)
 424   message(FATAL_ERROR "Cannot activate the Java bindings without the MSG module. Either add -Denable_msg=ON or -Denable_java=OFF")
 425 endif()
 426
 427 if (enable_model-checking AND enable_ns3)
 428   message(FATAL_ERROR "Cannot activate both model-checking and ns-3 bindings: ns-3 pulls too much dependencies for the MC to work")
 429 endif()
 430
 431 if(enable_smpi)
 432   SET(HAVE_SMPI 1)
 433   if(WIN32)
 434     message (STATUS "Warning: no support for SMPI automatic privatization on Windows.")
 435     SET(HAVE_PRIVATIZATION 0)
 436   else()
 437     SET(HAVE_PRIVATIZATION 1)
 438   endif()
 439 else()
 440   SET(HAVE_SMPI 0)
 441 endif()
 442
 443 #--------------------------------------------------------------------------------------------------
 444 ### Check what context backends are available
 445
 446 set(HAVE_UCONTEXT_CONTEXTS 0)
 447 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
 448 if(NOT HAVE_UCONTEXT_H)
 449   message(STATUS "No ucontext factory: <ucontext.h> not found.")
 450 elseif(APPLE)
 451   message(STATUS "No ucontext factory: Apple don't want us to use them.")
 452   set(HAVE_UCONTEXT_H 0)
 453 else()
 454   try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
 455     OUTPUT_VARIABLE compile_makecontext_output)
 456
 457   #If can have both context
 458   if(compile_makecontext)
 459     set(HAVE_UCONTEXT_CONTEXTS 1)
 460     message(STATUS "Support for ucontext factory ok.")
 461   else()
 462     message(STATUS "Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
 463     message(STATUS "No ucontext factory: makecontext() is not compilable.")
 464   endif()
 465
 466   # Stack setup (size and address)
 467   try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
 468     ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
 469     RUN_OUTPUT_VARIABLE stack_setup)
 470
 471   LIST(LENGTH stack_setup stack_setup_len)
 472   if("${stack_setup_len}" STREQUAL "2")
 473     LIST(GET stack_setup 0 makecontext_addr)
 474     LIST(GET stack_setup 1 makecontext_size)
 475     set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
 476     set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
 477   else()
 478     message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
 479   endif()
 480 endif()
 481
 482 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
 483 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
 484   ${CMAKE_BINARY_DIR}
 485   ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
 486   RUN_OUTPUT_VARIABLE stack
 487   COPY_FILE test_stackgrowth)
 488
 489 if("${stack}" STREQUAL "down")
 490   set(PTH_STACKGROWTH "-1")
 491 elseif("${stack}" STREQUAL "up")
 492   set(PTH_STACKGROWTH "1")
 493 else()
 494   if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
 495     set(PTH_STACKGROWTH "-1")
 496   elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
 497     set(PTH_STACKGROWTH "-1")
 498   else()
 499     message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
 500   endif()
 501 endif()
 502 # If the test ran well, remove the test binary
 503 file(REMOVE test_stackgrowth)
 504 #--------------------------------------------------------------------------------------------------
 505
 506 ###############
 507 ## GIT version check
 508 ##
 509 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
 510   execute_process(COMMAND git rev-parse --verify --short HEAD
 511      WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}
 512      OUTPUT_VARIABLE GIT_VERSION
 513      OUTPUT_STRIP_TRAILING_WHITESPACE)
 514   # Check for uncommitted changes
 515   execute_process(COMMAND git diff --name-only HEAD
 516     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}
 517     OUTPUT_VARIABLE files_changed)
 518   if(files_changed)
 519     set(GIT_VERSION "${GIT_VERSION}-dirty")
 520   endif()
 521 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
 522   FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
 523 else()
 524   set(GIT_VERSION "none, release version")
 525 endif()
 526 message(STATUS "Git version: ${GIT_VERSION}")
 527
 528 ### Define source packages for Libs
 529 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
 530
 531 ### Setup gcc & clang flags (include after DefinePackage.cmake, and before generating header files)
 532 if (NOT MSVC)
 533   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Flags.cmake)
 534 endif()
 535
 536 ### Generate the required headers and scripts
 537 #############################################
 538
 539 # Avoid triggering a (full) rebuild by touching the files if they did not really change
 540 configure_file("${CMAKE_HOME_DIRECTORY}/src/internal_config.h.in"    "${CMAKE_BINARY_DIR}/src/internal_config.h.generated"    @ONLY IMMEDIATE)
 541 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid/version.h.in" "${CMAKE_BINARY_DIR}/include/simgrid/version.h.generated" @ONLY IMMEDIATE)
 542 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid/config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated" @ONLY IMMEDIATE)
 543 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
 544 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid/version.h.generated ${CMAKE_BINARY_DIR}/include/simgrid/version.h)
 545 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid/config.h)
 546 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
 547 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated)
 548 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid/version.h.generated)
 549
 550 # We need two versions of the SMPI scripts because they contain the path to the library
 551 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
 552
 553 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
 554
 555 ### SMPI script used when simgrid is installed
 556 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
 557 set(includedir "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_INCLUDEDIR}")
 558 set(libdir "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
 559 set(includeflag "-I${includedir} -I${includedir}/smpi")
 560 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${libdir}")
 561 if(NS3_LIBRARY_PATH)
 562   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 563 endif()
 564 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
 565 set(SMPIMAIN ${libdir}/simgrid/smpimain)
 566 set(SMPIREPLAYMAIN ${libdir}/simgrid/smpireplaymain)
 567
 568 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
 569 #configure mpif.f90 to build mpi.mod
 570 if(SMPI_FORTRAN)
 571   set(MODULE_MPIF_IN "module mpi")
 572   set(MODULE_MPIF_OUT "end module mpi")
 573   configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated @ONLY)
 574   execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
 575   set(CMAKE_Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/include/smpi)
 576   add_library(mpi SHARED ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
 577 endif()
 578
 579 foreach(script cc cxx ff f90 run)
 580   configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
 581 endforeach()
 582
 583 ### SMPI scripts used when compiling simgrid
 584 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
 585 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
 586 set(libdir "${CMAKE_BINARY_DIR}/lib")
 587 set(includeflag "-I${includedir} -I${includedir}/smpi")
 588 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
 589 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${libdir}")
 590 if(NS3_LIBRARY_PATH)
 591   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 592 endif()
 593 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
 594 set(SMPIMAIN ${libdir}/simgrid/smpimain)
 595 set(SMPIREPLAYMAIN ${libdir}/simgrid/smpireplaymain)
 596
 597 foreach(script cc cxx ff f90 run)
 598   configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
 599 endforeach()
 600
 601 if(NOT WIN32)
 602   foreach(script cc cxx ff f90 run)
 603     execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
 604     execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
 605   endforeach()
 606 endif()
 607
 608 set(generated_headers_to_install
 609   ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
 610   ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h
 611   ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/version.h
 612   )
 613
 614 set(generated_headers  ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
 615
 616 set(generated_files_to_clean
 617   ${generated_headers}
 618   ${generated_headers_to_install}
 619   ${CMAKE_BINARY_DIR}/bin/smpicc
 620   ${CMAKE_BINARY_DIR}/bin/smpicxx
 621   ${CMAKE_BINARY_DIR}/bin/smpiff
 622   ${CMAKE_BINARY_DIR}/bin/smpif90
 623   ${CMAKE_BINARY_DIR}/bin/smpirun
 624   ${CMAKE_BINARY_DIR}/bin/colorize
 625   ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
 626   ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
 627   )
 628
 629 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
 630   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
 631   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
 632   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allreduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt COPYONLY)
 633   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
 634   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
 635   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
 636   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
 637   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
 638   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
 639   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
 640   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
 641   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
 642   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
 643   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_cluster ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_cluster COPYONLY)
 644   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_coll ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_coll COPYONLY)
 645   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_io ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_io COPYONLY)
 646   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_empty ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_empty COPYONLY)
 647
 648   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
 649   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
 650   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
 651   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
 652   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
 653   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
 654   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
 655   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
 656   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
 657   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
 658   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
 659   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
 660   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
 661   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
 662   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
 663   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
 664   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
 665   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
 666   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
 667   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
 668   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
 669   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
 670   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
 671   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
 672   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
 673   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
 674   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
 675   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
 676   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
 677   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
 678   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
 679   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
 680   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
 681   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
 682   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
 683
 684 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt COPYONLY)
 685 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt COPYONLY)
 686 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt COPYONLY)
 687 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt COPYONLY)
 688 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt COPYONLY)
 689 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt COPYONLY)
 690 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt COPYONLY)
 691 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt COPYONLY)
 692 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt COPYONLY)
 693 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute COPYONLY)
 694 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive COPYONLY)
 695 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 COPYONLY)
 696 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple COPYONLY)
 697 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time COPYONLY)
 698 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources COPYONLY)
 699
 700   set(generated_files_to_clean
 701     ${generated_files_to_clean}
 702     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
 703     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
 704     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt
 705     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
 706     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
 707     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
 708     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
 709     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
 710     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
 711     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
 712     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
 713     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
 714     ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
 715     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
 716     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
 717     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
 718     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
 719     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
 720     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
 721     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
 722     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
 723     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
 724     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
 725     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
 726     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
 727     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
 728     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
 729     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
 730     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
 731     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
 732     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
 733     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
 734     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
 735     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
 736     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
 737     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
 738     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
 739     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
 740     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
 741     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
 742     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
 743     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
 744     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
 745     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
 746     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
 747     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
 748     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
 749     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
 750     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt
 751     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt
 752     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt
 753     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt
 754     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt
 755     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt
 756     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt
 757     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt
 758     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt
 759     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/replay_multiple_manual.tesh
 760     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute
 761     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive
 762     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2
 763     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple
 764     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty1
 765     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2
 766     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_resources
 767     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time
 768     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time_and_resources
 769     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed1
 770     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2
 771     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_resources
 772     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time
 773     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources
 774     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_nojob
 775     )
 776 endif()
 777
 778 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
 779   "${generated_files_to_clean}")
 780
 781 add_custom_target(tests    COMMENT "Recompiling the tests")
 782 add_custom_target(tests-mc COMMENT "Recompiling the MC tests and tools.")
 783 add_dependencies(tests tests-mc)
 784
 785 ### Build some Maintainer files
 786 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
 787
 788 ### Make Libs
 789 if(NOT WIN32)
 790   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
 791 else()
 792   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
 793 endif()
 794
 795 if(enable_java)
 796   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
 797 endif()
 798
 799 # Python binding (with pybind11)
 800 ################
 801 if((NOT DEFINED enable_python) OR enable_python)
 802   if(EXISTS ${CMAKE_HOME_DIRECTORY}/pybind11) # Try to use a local copy of pybind11, if any
 803     message(STATUS "Use the internal copy of pybind11.")
 804     add_subdirectory(${CMAKE_HOME_DIRECTORY}/pybind11)
 805     set(pybind11_FOUND ON)
 806
 807     set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/pybind11/tools/)
 808     set(Python_ADDITIONAL_VERSIONS 3.9 3.8 3.7 3.6 3.5 3.4)
 809     find_package(PythonLibsNew ${PYBIND11_PYTHON_VERSION} REQUIRED)
 810
 811   else()
 812     find_package(pybind11 CONFIG)
 813     message(STATUS "Pybind11 version: ${pybind11_VERSION}")
 814     if (pybind11_VERSION VERSION_LESS 2.4)
 815       message(STATUS "SimGrid needs at least v2.4 of pybind11. Disabling the Python bindings.")
 816       set(pybind11_FOUND OFF)
 817     endif()
 818   endif()
 819
 820   if(NOT PYTHONLIBS_FOUND AND NOT Python3_Development_FOUND)
 821     message(STATUS "Python libs not found. Turn pybind11 off.")
 822
 823     set(pybind11_FOUND OFF)
 824   endif()
 825 endif()
 826
 827 option(enable_python "Whether the Python bindings are activated." ${pybind11_FOUND}) # ON by default if dependencies are met
 828
 829 if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_model-checking AND enable_python)
 830   message(WARNING "FreeBSD + Model-Checking + Python = too much for now. Disabling the Python bindings.")
 831   set(enable_python FALSE)
 832 endif()
 833
 834 if(enable_python)
 835   if(pybind11_FOUND)
 836     message(STATUS "Found pybind11.")
 837     if(NOT enable_lto)
 838       set(pybind11_options NO_EXTRAS)
 839     endif()
 840     pybind11_add_module(python-bindings src/bindings/python/simgrid_python.cpp ${pybind11_options})
 841     target_compile_features(python-bindings PRIVATE cxx_std_14)
 842     target_link_libraries(python-bindings PUBLIC simgrid)
 843     set_target_properties(python-bindings PROPERTIES
 844                           LIBRARY_OUTPUT_NAME simgrid
 845                           CXX_VISIBILITY_PRESET "default"
 846                           INTERPROCEDURAL_OPTIMIZATION FALSE)
 847     # LTO is disabled here from the python bindings because this makes a
 848     # cmake warning about CMP0069 even when this policy is set. This
 849     # problem may be in cmake, in pybind11 or even in our code, not sure.
 850     # It may get eventually solved in cmake or pybind11. Or not.
 851     # The sure thing is that our python bindings are in one file only,
 852     # so there is no need for LTO here. Problem solved :)
 853
 854     add_dependencies(tests python-bindings)
 855     set_property(TARGET python-bindings
 856                  APPEND PROPERTY INCLUDE_DIRECTORIES "${INTERNAL_INCLUDES}")
 857   else()
 858     message(FATAL_ERROR "Please install pybind11-dev to build the Python bindings (or disable that option).")
 859   endif()
 860 endif()
 861 mark_as_advanced(PYBIND11_PYTHON_VERSION)
 862 mark_as_advanced(pybind11_DIR)
 863
 864 ### Make tests
 865 if(enable_memcheck_xml)
 866   set(enable_memcheck true)
 867 endif()
 868
 869 INCLUDE(CTest)
 870 ENABLE_TESTING()
 871 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
 872 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
 873
 874 ### Define subdirectories
 875 foreach(cmakefile ${CMAKEFILES_TXT})
 876   string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
 877   add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
 878 endforeach()
 879
 880 ### Setup the distrib
 881 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
 882
 883 ### Build the docs if asked to
 884 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
 885
 886 ### Print the result of configuration
 887 message("")
 888 message("##########################################")
 889 message("#### Content of src/internal_config.h ####")
 890 message("##########################################")
 891 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
 892 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
 893 foreach(line ${config_output})
 894   message("   ${line}")
 895 endforeach()
 896 message("##########################################")
 897 message("####   Content of simgrid/config.h    ####")
 898 message("##########################################")
 899 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h config_output)
 900 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
 901 foreach(line ${config_output})
 902   message("   ${line}")
 903 endforeach()
 904 message("##########################################")
 905 message("####   End of configuration headers   ####")
 906 message("##########################################")
 907
 908 message("\nConfiguration of package `simgrid':")
 909 message("        Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
 910 message("        Build Name ..................: ${BUILDNAME}")
 911 message("        Cmake Generator .............: ${CMAKE_GENERATOR}")
 912 message("        Site ........................: ${SITE}")
 913 message("        Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
 914 message("        Release .....................: simgrid-${release_version}")
 915 message("")
 916 message("        Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
 917 message("                version .............: ${CMAKE_C_COMPILER_VERSION}")
 918 message("                is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
 919 message("        Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
 920 message("                version .............: ${CMAKE_CXX_COMPILER_VERSION}")
 921 if(${Java_FOUND})
 922   message("        Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
 923   message("                version .............: ${Java_VERSION_STRING}")
 924   message("                runtime .............: ${Java_JAVA_EXECUTABLE}")
 925 endif()
 926 if(CMAKE_Fortran_COMPILER)
 927   message("        Compiler: Fortran ...........: ${SMPI_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
 928   message("                version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
 929 endif()
 930 message("        Linker: .....................: ${CMAKE_LINKER}")
 931 message("                version .............: ${LINKER_VERSION}")
 932 message("        Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
 933 message("")
 934 message("        CFlags ......................: ${CMAKE_C_FLAGS}")
 935 message("        CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
 936 message("        LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
 937 message("        with LTO ....................: ${enable_lto}")
 938 message("")
 939
 940 if (SIMGRID_HAVE_MSG)
 941   message("        Compile MSG .................: ON")
 942 else()
 943   message("        Compile MSG .................: OFF")
 944 endif()
 945
 946 if (SIMGRID_HAVE_NS3)
 947   message("        Compile ns-3 ................: ON (path: ${NS3_PATH})")
 948 else()
 949   message("        Compile ns-3 ................: OFF  (hint: ${NS3_HINT})")
 950 endif()
 951
 952 if (${Java_FOUND})
 953   message("        Compile Java ................: ON")
 954   message("          Native lib in jar .........: ${enable_lib_in_jar}")
 955 else()
 956   message("        Compile Java ................: OFF")
 957 endif()
 958 if(pybind11_FOUND)
 959   message("        Compile Python bindings .....: ${enable_python}")
 960   message("          module ....................: ${PYTHON_MODULE_PREFIX}simgrid${PYTHON_MODULE_EXTENSION}")
 961 else()
 962   message("        Compile Python bindings .....: OFF (disabled, or pybind11 not found)")
 963 endif()
 964 message("        Compile Lua .................: ${SIMGRID_HAVE_LUA}")
 965 message("        Compile Smpi ................: ${HAVE_SMPI}")
 966 message("          Smpi fortran ..............: ${SMPI_FORTRAN}")
 967 message("          MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
 968 message("          Privatization .............: ${HAVE_PRIVATIZATION}")
 969 message("          PAPI support...............: ${HAVE_PAPI}")
 970 message("        Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
 971 message("")
 972 message("        Maintainer mode .............: ${enable_maintainer_mode}")
 973 message("        Documentation................: ${enable_documentation}")
 974 message("        Model checking ..............: ${SIMGRID_HAVE_MC}")
 975 message("        Jedule  mode ................: ${SIMGRID_HAVE_JEDULE}")
 976 message("        Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
 977 message("        Mallocators .................: ${enable_mallocators}")
 978 message("")
 979 message("        Simgrid dependencies ........: ${SIMGRID_DEP}")
 980 message("")
 981
 982 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
 983 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build  "GIT version : ${GIT_VERSION}\n")
 984 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release     : simgrid-${release_version}\n")
 985
 986 INCLUDE(Dart)