4 # Doxyfile 1.3.6-20040222
6 # This file describes the settings to be used by the documentation system
7 # doxygen (www.doxygen.org) for a project
9 # All text after a hash (#) is considered a comment and will be ignored
11 # TAG = value [value, ...]
12 # For lists items can also be appended using:
13 # TAG += value [value, ...]
14 # Values that contain spaces should be placed between quotes (" ")
16 #---------------------------------------------------------------------------
17 # Project related configuration options
18 #---------------------------------------------------------------------------
20 # This tag specifies the encoding used for all characters in the config file that
21 # follow. The default is UTF-8 which is also the encoding used for all text before
22 # the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into
23 # libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of
26 DOXYFILE_ENCODING = UTF-8
28 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
29 # by quotes) that should identify the project.
31 PROJECT_NAME = SimGrid
33 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
34 # This could be handy for archiving the generated documentation or
35 # if some version control system is used.
39 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
40 # base path where the generated documentation will be put.
41 # If a relative path is entered, it will be relative to the location
42 # where doxygen was started. If left blank the current directory will be used.
46 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
47 # 4096 sub-directories (in 2 levels) under the output directory of each output
48 # format and will distribute the generated files over these directories.
49 # Enabling this option can be useful when feeding doxygen a huge amount of
50 # source files, where putting all generated files in the same directory would
51 # otherwise cause performance problems for the file system.
55 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
56 # documentation generated by doxygen is written. Doxygen will use this
57 # information to generate all constant output in the proper language.
58 # The default language is English, other supported languages are:
59 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
60 # Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,
61 # Italian, Japanese, Japanese-en (Japanese with English messages), Korean,
62 # Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,
63 # Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
65 OUTPUT_LANGUAGE = English
67 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
68 # include brief member descriptions after the members that are listed in
69 # the file and class documentation (similar to JavaDoc).
70 # Set to NO to disable this.
72 BRIEF_MEMBER_DESC = YES
74 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
75 # the brief description of a member or function before the detailed description.
76 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
77 # brief descriptions will be completely suppressed.
81 # This tag implements a quasi-intelligent brief description abbreviator
82 # that is used to form the text in various listings. Each string
83 # in this list, if found as the leading text of the brief description, will be
84 # stripped from the text and the result after processing the whole list, is
85 # used as the annotated text. Otherwise, the brief description is used as-is.
86 # If left blank, the following values are used ("$name" is automatically
87 # replaced with the name of the entity): "The $name class" "The $name widget"
88 # "The $name file" "is" "provides" "specifies" "contains"
89 # "represents" "a" "an" "the"
93 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
94 # Doxygen will generate a detailed section even if there is only a brief
97 ALWAYS_DETAILED_SEC = NO
99 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
100 # inherited members of a class in the documentation of that class as if those
101 # members were ordinary class members. Constructors, destructors and assignment
102 # operators of the base classes will not be shown.
104 INLINE_INHERITED_MEMB = YES
106 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
107 # path before files name in the file list and in the header files. If set
108 # to NO the shortest path that makes the file name unique will be used.
110 FULL_PATH_NAMES = YES
112 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
113 # can be used to strip a user-defined part of the path. Stripping is
114 # only done if one of the specified strings matches the left-hand part of
115 # the path. The tag can be used to show relative paths in the file list.
116 # If left blank the directory from which doxygen is run is used as the
119 STRIP_FROM_PATH = @srcdir@
121 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
122 # the path mentioned in the documentation of a class, which tells
123 # the reader which header file to include in order to use a class.
124 # If left blank only the name of the header file containing the class
125 # definition is used. Otherwise one should specify the include paths that
126 # are normally passed to the compiler using the -I flag.
128 STRIP_FROM_INC_PATH =
130 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
131 # (but less readable) file names. This can be useful is your file systems
132 # doesn't support long names like on DOS, Mac, or CD-ROM.
136 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
137 # will interpret the first line (until the first dot) of a JavaDoc-style
138 # comment as the brief description. If set to NO, the JavaDoc
139 # comments will behave just like the Qt-style comments (thus requiring an
140 # explicit @brief command for a brief description.
142 JAVADOC_AUTOBRIEF = NO
144 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
145 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
146 # comments) as a brief description. This used to be the default behaviour.
147 # The new default is to treat a multi-line C++ comment block as a detailed
148 # description. Set this tag to YES if you prefer the old behaviour instead.
150 MULTILINE_CPP_IS_BRIEF = NO
152 # If the DETAILS_AT_TOP tag is set to YES then Doxygen
153 # will output the detailed description near the top, like JavaDoc.
154 # If set to NO, the detailed description appears after the member
159 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
160 # member inherits the documentation from any documented member that it
165 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
166 # a new page for each member. If set to NO, the documentation of a member will
167 # be part of the file/class/namespace that contains it.
169 SEPARATE_MEMBER_PAGES = NO
171 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
172 # Doxygen uses this value to replace tabs by spaces in code fragments.
176 # This tag can be used to specify a number of aliases that acts
177 # as commands in the documentation. An alias has the form "name=value".
178 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
179 # put the command \sideeffect (or @sideeffect) in the documentation, which
180 # will result in a user-defined paragraph with heading "Side Effects:".
181 # You can put \n's in the value part of an alias to insert newlines.
185 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
186 # sources only. Doxygen will then generate output that is more tailored for C.
187 # For instance, some of the names that are used will be different. The list
188 # of all members will be omitted, etc.
190 OPTIMIZE_OUTPUT_FOR_C = YES
192 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
193 # sources only. Doxygen will then generate output that is more tailored for Java.
194 # For instance, namespaces will be presented as packages, qualified scopes
195 # will look different, etc.
197 OPTIMIZE_OUTPUT_JAVA = NO
199 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
200 # include (a tag file for) the STL sources as input, then you should
201 # set this tag to YES in order to let doxygen match functions declarations and
202 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
203 # func(std::string) {}). This also make the inheritance and collaboration
204 # diagrams that involve STL classes more complete and accurate.
206 BUILTIN_STL_SUPPORT = NO
208 # If you use Microsoft's C++/CLI language, you should set this option to YES to
209 # enable parsing support.
213 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
214 # tag is set to YES, then doxygen will reuse the documentation of the first
215 # member in the group (if any) for the other members of the group. By default
216 # all members of a group must be documented explicitly.
218 DISTRIBUTE_GROUP_DOC = NO
220 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
221 # the same type (for instance a group of public functions) to be put as a
222 # subgroup of that type (e.g. under the Public Functions section). Set it to
223 # NO to prevent subgrouping. Alternatively, this can be done per class using
224 # the \nosubgrouping command.
228 #---------------------------------------------------------------------------
229 # Build related configuration options
230 #---------------------------------------------------------------------------
232 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
233 # documentation are documented, even if no documentation was available.
234 # Private class members and static file members will be hidden unless
235 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
239 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
240 # will be included in the documentation.
244 # If the EXTRACT_STATIC tag is set to YES all static members of a file
245 # will be included in the documentation.
249 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
250 # defined locally in source files will be included in the documentation.
251 # If set to NO only classes defined in header files are included.
253 EXTRACT_LOCAL_CLASSES = YES
255 # This flag is only useful for Objective-C code. When set to YES local
256 # methods, which are defined in the implementation section but not in
257 # the interface are included in the documentation.
258 # If set to NO (the default) only methods in the interface are included.
260 EXTRACT_LOCAL_METHODS = NO
262 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
263 # undocumented members of documented classes, files or namespaces.
264 # If set to NO (the default) these members will be included in the
265 # various overviews, but no documentation section is generated.
266 # This option has no effect if EXTRACT_ALL is enabled.
268 HIDE_UNDOC_MEMBERS = YES
270 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
271 # undocumented classes that are normally visible in the class hierarchy.
272 # If set to NO (the default) these classes will be included in the various
273 # overviews. This option has no effect if EXTRACT_ALL is enabled.
275 HIDE_UNDOC_CLASSES = YES
277 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
278 # friend (class|struct|union) declarations.
279 # If set to NO (the default) these declarations will be included in the
282 HIDE_FRIEND_COMPOUNDS = NO
284 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
285 # documentation blocks found inside the body of a function.
286 # If set to NO (the default) these blocks will be appended to the
287 # function's detailed documentation block.
289 HIDE_IN_BODY_DOCS = NO
291 # The INTERNAL_DOCS tag determines if documentation
292 # that is typed after a \internal command is included. If the tag is set
293 # to NO (the default) then the documentation will be excluded.
294 # Set it to YES to include the internal documentation.
298 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
299 # file names in lower-case letters. If set to YES upper-case letters are also
300 # allowed. This is useful if you have classes or files whose names only differ
301 # in case and if your file system supports case sensitive file names. Windows
302 # and Mac users are advised to set this option to NO.
304 CASE_SENSE_NAMES = YES
306 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
307 # will show members with their full class and namespace scopes in the
308 # documentation. If set to YES the scope will be hidden.
310 HIDE_SCOPE_NAMES = NO
312 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
313 # will put a list of the files that are included by a file in the documentation
316 SHOW_INCLUDE_FILES = YES
318 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
319 # is inserted in the documentation for inline members.
323 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
324 # will sort the (detailed) documentation of file and class members
325 # alphabetically by member name. If set to NO the members will appear in
328 SORT_MEMBER_DOCS = NO
330 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
331 # brief documentation of file, namespace and class members alphabetically
332 # by member name. If set to NO (the default) the members will appear in
337 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
338 # sorted by fully-qualified names, including namespaces. If set to
339 # NO (the default), the class list will be sorted only by class name,
340 # not including the namespace part.
341 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
342 # Note: This option applies only to the class list, not to the
345 SORT_BY_SCOPE_NAME = NO
347 # The GENERATE_TODOLIST tag can be used to enable (YES) or
348 # disable (NO) the todo list. This list is created by putting \todo
349 # commands in the documentation.
351 GENERATE_TODOLIST = YES
353 # The GENERATE_TESTLIST tag can be used to enable (YES) or
354 # disable (NO) the test list. This list is created by putting \test
355 # commands in the documentation.
357 GENERATE_TESTLIST = YES
359 # The GENERATE_BUGLIST tag can be used to enable (YES) or
360 # disable (NO) the bug list. This list is created by putting \bug
361 # commands in the documentation.
363 GENERATE_BUGLIST = YES
365 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
366 # disable (NO) the deprecated list. This list is created by putting
367 # \deprecated commands in the documentation.
369 GENERATE_DEPRECATEDLIST= YES
371 # The ENABLED_SECTIONS tag can be used to enable conditional
372 # documentation sections, marked by \if sectionname ... \endif.
376 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
377 # the initial value of a variable or define consists of for it to appear in
378 # the documentation. If the initializer consists of more lines than specified
379 # here it will be hidden. Use a value of 0 to hide initializers completely.
380 # The appearance of the initializer of individual variables and defines in the
381 # documentation can be controlled using \showinitializer or \hideinitializer
382 # command in the documentation regardless of this setting.
384 MAX_INITIALIZER_LINES = 30
386 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
387 # at the bottom of the documentation of classes and structs. If set to YES the
388 # list will mention the files that were used to generate the documentation.
390 SHOW_USED_FILES = YES
392 # If the sources in your project are distributed over multiple directories
393 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
394 # in the documentation. The default is NO.
396 SHOW_DIRECTORIES = NO
398 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
399 # doxygen should invoke to get the current version for each file (typically from the
400 # version control system). Doxygen will invoke the program by executing (via
401 # popen()) the command <command> <input-file>, where <command> is the value of
402 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
403 # provided by doxygen. Whatever the program writes to standard output
404 # is used as the file version. See the manual for examples.
406 FILE_VERSION_FILTER =
408 #---------------------------------------------------------------------------
409 # configuration options related to warning and progress messages
410 #---------------------------------------------------------------------------
412 # The QUIET tag can be used to turn on/off the messages that are generated
413 # by doxygen. Possible values are YES and NO. If left blank NO is used.
417 # The WARNINGS tag can be used to turn on/off the warning messages that are
418 # generated by doxygen. Possible values are YES and NO. If left blank
423 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
424 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
425 # automatically be disabled.
427 WARN_IF_UNDOCUMENTED = YES
429 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
430 # potential errors in the documentation, such as not documenting some
431 # parameters in a documented function, or documenting parameters that
432 # don't exist or using markup commands wrongly.
434 WARN_IF_DOC_ERROR = YES
436 # This WARN_NO_PARAMDOC option can be abled to get warnings for
437 # functions that are documented, but have no documentation for their parameters
438 # or return value. If set to NO (the default) doxygen will only warn about
439 # wrong or incomplete parameter documentation, but not about the absence of
442 WARN_NO_PARAMDOC = NO
444 # The WARN_FORMAT tag determines the format of the warning messages that
445 # doxygen can produce. The string should contain the $file, $line, and $text
446 # tags, which will be replaced by the file and line number from which the
447 # warning originated and the warning text. Optionally the format may contain
448 # $version, which will be replaced by the version of the file (if it could
449 # be obtained via FILE_VERSION_FILTER)
451 WARN_FORMAT = "$file:$line: $text"
453 # The WARN_LOGFILE tag can be used to specify a file to which warning
454 # and error messages should be written. If left blank the output is written
459 #---------------------------------------------------------------------------
460 # configuration options related to the input files
461 #---------------------------------------------------------------------------
463 # The INPUT tag can be used to specify the files and/or directories that contain
464 # documented source files. You may enter file names like "myfile.cpp" or
465 # directories like "/usr/src/myproject". Separate the files or directories
468 INPUT = @srcdir@/index.doc \
470 @srcdir@/contrib.doc \
471 @srcdir@/publis.doc \
472 @srcdir@/people.doc \
473 @srcdir@/history.doc \
476 @srcdir@/modules.doc \
477 @srcdir@/module-xbt.doc \
478 @srcdir@/module-msg.doc \
479 @srcdir@/module-gras.doc @srcdir@/module-amok.doc \
480 @srcdir@/module-sd.doc \
481 @srcdir@/module-surf.doc \
483 @srcdir@/gtut-main.doc \
484 @srcdir@/gtut-introduction.doc \
485 @srcdir@/gtut-tour.doc \
486 @srcdir@/gtut-tour-01-bones.doc \
487 @srcdir@/gtut-tour-02-simple.doc \
488 @srcdir@/gtut-tour-03-args.doc \
489 @srcdir@/gtut-tour-04-callback.doc \
490 @srcdir@/gtut-tour-05-globals.doc \
491 @srcdir@/gtut-tour-06-logs.doc \
492 @srcdir@/gtut-tour-07-timers.doc \
493 @srcdir@/gtut-tour-08-exceptions.doc \
494 @srcdir@/gtut-tour-09-simpledata.doc \
495 @srcdir@/gtut-tour-10-rpc.doc \
496 @srcdir@/gtut-tour-11-explicitwait.doc \
497 @srcdir@/gtut-tour-recap-messages.doc \
498 @srcdir@/gtut-tour-12-staticstruct.doc \
499 @srcdir@/gtut-tour-13-pointers.doc \
500 @srcdir@/gtut-tour-14-dynar.doc \
501 @srcdir@/gtut-tour-15-manualdatadef.doc \
502 @srcdir@/gtut-tour-16-exchangecb.doc \
503 @srcdir@/gtut-howto.doc \
504 @srcdir@/gtut-howto-design.doc \
506 ./logcategories.doc \
508 @top_srcdir@/include/ \
509 @top_srcdir@/include/msg \
510 @top_srcdir@/include/gras \
511 @top_srcdir@/include/amok \
512 @top_srcdir@/include/xbt \
513 @top_srcdir@/include/simdag \
514 @top_srcdir@/src/include/surf \
515 @top_srcdir@/src/xbt/ \
516 @top_srcdir@/src/surf/ \
517 @top_srcdir@/src/msg/ \
518 @top_srcdir@/src/gras \
519 @top_srcdir@/src/gras/DataDesc \
520 @top_srcdir@/src/gras/Msg \
521 @top_srcdir@/src/gras/Transport \
522 @top_srcdir@/src/gras/Virtu \
523 @top_srcdir@/src/amok \
524 @top_srcdir@/src/amok/Bandwidth \
525 @top_srcdir@/src/amok/PeerManagement \
526 @top_srcdir@/src/simdag \
527 @top_srcdir@/src/java/simgrid/msg
529 # This tag can be used to specify the character encoding of the source files that
530 # doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default
531 # input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding.
532 # See http://www.gnu.org/software/libiconv for the list of possible encodings.
534 INPUT_ENCODING = UTF-8
536 # If the value of the INPUT tag contains directories, you can use the
537 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
538 # and *.h) to filter out the source-files in the directories. If left
539 # blank the following patterns are tested:
540 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
541 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
545 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
546 # should be searched for input files as well. Possible values are YES and NO.
547 # If left blank NO is used.
551 # The EXCLUDE tag can be used to specify files and/or directories that should
552 # excluded from the INPUT source files. This way you can easily exclude a
553 # subdirectory from a directory tree whose root is specified with the INPUT tag.
557 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
558 # directories that are symbolic links (a Unix filesystem feature) are excluded
561 EXCLUDE_SYMLINKS = NO
563 # If the value of the INPUT tag contains directories, you can use the
564 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
565 # certain files from those directories. Note that the wildcards are matched
566 # against the file with absolute path, so to exclude all test directories
567 # for example use the pattern */test/*
571 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
572 # (namespaces, classes, functions, etc.) that should be excluded from the output.
573 # The symbol name can be a fully qualified name, a word, or if the wildcard * is used,
574 # a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test
578 # The EXAMPLE_PATH tag can be used to specify one or more files or
579 # directories that contain example code fragments that are included (see
580 # the \include command).
583 @top_srcdir@/doc/gtut-files \
584 @top_srcdir@/src/surf/ \
585 @top_srcdir@/src/xbt/ \
586 @top_srcdir@/examples \
587 @top_srcdir@/testsuite
589 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
590 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
591 # and *.h) to filter out the source-files in the directories. If left
592 # blank all files are included.
596 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
597 # searched for input files to be used with the \include or \dontinclude
598 # commands irrespective of the value of the RECURSIVE tag.
599 # Possible values are YES and NO. If left blank NO is used.
601 EXAMPLE_RECURSIVE = YES
603 # The IMAGE_PATH tag can be used to specify one or more files or
604 # directories that contain image that are included in the documentation (see
605 # the \image command).
607 IMAGE_PATH = @top_srcdir@/doc
609 # The INPUT_FILTER tag can be used to specify a program that doxygen should
610 # invoke to filter for each input file. Doxygen will invoke the filter program
611 # by executing (via popen()) the command <filter> <input-file>, where <filter>
612 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
613 # input file. Doxygen will then use the output that the filter program writes
614 # to standard output. If FILTER_PATTERNS is specified, this tag will be
619 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
620 # basis. Doxygen will compare the file name with each pattern and apply the
621 # filter if there is a match. The filters are a list of the form:
622 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
623 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
624 # is applied to all files.
628 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
629 # INPUT_FILTER) will be used to filter the input files when producing source
630 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
632 FILTER_SOURCE_FILES = NO
634 #---------------------------------------------------------------------------
635 # configuration options related to source browsing
636 #---------------------------------------------------------------------------
638 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
639 # be generated. Documented entities will be cross-referenced with these sources.
640 # Note: To get rid of all source code in the generated output, make sure also
641 # VERBATIM_HEADERS is set to NO.
645 # Setting the INLINE_SOURCES tag to YES will include the body
646 # of functions and classes directly in the documentation.
650 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
651 # doxygen to hide any special comment blocks from generated source code
652 # fragments. Normal C and C++ comments will always remain visible.
654 STRIP_CODE_COMMENTS = YES
656 # If the REFERENCED_BY_RELATION tag is set to YES (the default)
657 # then for each documented function all documented
658 # functions referencing it will be listed.
660 REFERENCED_BY_RELATION = NO
662 # If the REFERENCES_RELATION tag is set to YES (the default)
663 # then for each documented function all documented entities
664 # called/used by that function will be listed.
666 REFERENCES_RELATION = NO
668 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
669 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
670 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
671 # link to the source code. Otherwise they will link to the documentstion.
673 REFERENCES_LINK_SOURCE = YES
675 # If the USE_HTAGS tag is set to YES then the references to source code
676 # will point to the HTML generated by the htags(1) tool instead of doxygen
677 # built-in source browser. The htags tool is part of GNU's global source
678 # tagging system (see http://www.gnu.org/software/global/global.html). You
679 # will need version 4.8.6 or higher.
683 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
684 # will generate a verbatim copy of the header file for each class for
685 # which an include is specified. Set to NO to disable this.
687 VERBATIM_HEADERS = NO
689 #---------------------------------------------------------------------------
690 # configuration options related to the alphabetical class index
691 #---------------------------------------------------------------------------
693 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
694 # of all compounds will be generated. Enable this if the project
695 # contains a lot of classes, structs, unions or interfaces.
697 ALPHABETICAL_INDEX = NO
699 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
700 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
701 # in which this list will be split (can be a number in the range [1..20])
703 COLS_IN_ALPHA_INDEX = 5
705 # In case all classes in a project start with a common prefix, all
706 # classes will be put under the same header in the alphabetical index.
707 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
708 # should be ignored while generating the index headers.
712 #---------------------------------------------------------------------------
713 # configuration options related to the HTML output
714 #---------------------------------------------------------------------------
716 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
717 # generate HTML output.
721 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
722 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
723 # put in front of it. If left blank `html' will be used as the default path.
727 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
728 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
729 # doxygen will generate files with .html extension.
731 HTML_FILE_EXTENSION = .html
733 # The HTML_HEADER tag can be used to specify a personal HTML header for
734 # each generated HTML page. If it is left blank doxygen will generate a
739 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
740 # each generated HTML page. If it is left blank doxygen will generate a
743 HTML_FOOTER = @srcdir@/footer.html
745 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
746 # style sheet that is used by each HTML page. It can be used to
747 # fine-tune the look of the HTML output. If the tag is left blank doxygen
748 # will generate a default style sheet. Note that doxygen will try to copy
749 # the style sheet file to the HTML output directory, so don't put your own
750 # stylesheet in the HTML output directory as well, or it will be erased!
754 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
755 # files or namespaces will be aligned in HTML using tables. If set to
756 # NO a bullet list will be used.
758 HTML_ALIGN_MEMBERS = YES
760 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
761 # will be generated that can be used as input for tools like the
762 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
763 # of the generated HTML documentation.
765 GENERATE_HTMLHELP = NO
767 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
768 # be used to specify the file name of the resulting .chm file. You
769 # can add a path in front of the file if the result should not be
770 # written to the html output directory.
774 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
775 # be used to specify the location (absolute path including file name) of
776 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
777 # the HTML help compiler on the generated index.hhp.
781 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
782 # controls if a separate .chi index file is generated (YES) or that
783 # it should be included in the master .chm file (NO).
787 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
788 # controls whether a binary table of contents is generated (YES) or a
789 # normal table of contents (NO) in the .chm file.
793 # The TOC_EXPAND flag can be set to YES to add extra items for group members
794 # to the contents of the HTML help documentation and to the tree view.
798 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
799 # top of each HTML page. The value NO (the default) enables the index and
800 # the value YES disables it.
804 # This tag can be used to set the number of enum values (range [1..20])
805 # that doxygen will group on one line in the generated HTML documentation.
807 ENUM_VALUES_PER_LINE = 4
809 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
810 # generated containing a tree-like index structure (just like the one that
811 # is generated for HTML Help). For this to work a browser that supports
812 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
813 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
814 # probably better off using the HTML help feature.
816 GENERATE_TREEVIEW = NO
818 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
819 # used to set the initial width (in pixels) of the frame in which the tree
824 #---------------------------------------------------------------------------
825 # configuration options related to the LaTeX output
826 #---------------------------------------------------------------------------
828 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
829 # generate Latex output.
833 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
834 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
835 # put in front of it. If left blank `latex' will be used as the default path.
839 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
840 # invoked. If left blank `latex' will be used as the default command name.
842 LATEX_CMD_NAME = latex
844 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
845 # generate index for LaTeX. If left blank `makeindex' will be used as the
846 # default command name.
848 MAKEINDEX_CMD_NAME = makeindex
850 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
851 # LaTeX documents. This may be useful for small projects and may help to
852 # save some trees in general.
856 # The PAPER_TYPE tag can be used to set the paper type that is used
857 # by the printer. Possible values are: a4, a4wide, letter, legal and
858 # executive. If left blank a4wide will be used.
862 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
863 # packages that should be included in the LaTeX output.
867 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
868 # the generated latex document. The header should contain everything until
869 # the first chapter. If it is left blank doxygen will generate a
870 # standard header. Notice: only use this tag if you know what you are doing!
874 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
875 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
876 # contain links (just like the HTML output) instead of page references
877 # This makes the output suitable for online browsing using a pdf viewer.
881 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
882 # plain latex in the generated Makefile. Set this option to YES to get a
883 # higher quality PDF documentation.
887 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
888 # command to the generated LaTeX files. This will instruct LaTeX to keep
889 # running if errors occur, instead of asking the user for help.
890 # This option is also used when generating formulas in HTML.
894 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
895 # include the index chapters (such as File Index, Compound Index, etc.)
898 LATEX_HIDE_INDICES = NO
900 #---------------------------------------------------------------------------
901 # configuration options related to the RTF output
902 #---------------------------------------------------------------------------
904 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
905 # The RTF output is optimized for Word 97 and may not look very pretty with
906 # other RTF readers or editors.
910 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
911 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
912 # put in front of it. If left blank `rtf' will be used as the default path.
916 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
917 # RTF documents. This may be useful for small projects and may help to
918 # save some trees in general.
922 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
923 # will contain hyperlink fields. The RTF file will
924 # contain links (just like the HTML output) instead of page references.
925 # This makes the output suitable for online browsing using WORD or other
926 # programs which support those fields.
927 # Note: wordpad (write) and others do not support links.
931 # Load stylesheet definitions from file. Syntax is similar to doxygen's
932 # config file, i.e. a series of assignments. You only have to provide
933 # replacements, missing definitions are set to their default value.
935 RTF_STYLESHEET_FILE =
937 # Set optional variables used in the generation of an rtf document.
938 # Syntax is similar to doxygen's config file.
940 RTF_EXTENSIONS_FILE =
942 #---------------------------------------------------------------------------
943 # configuration options related to the man page output
944 #---------------------------------------------------------------------------
946 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
951 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
952 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
953 # put in front of it. If left blank `man' will be used as the default path.
957 # The MAN_EXTENSION tag determines the extension that is added to
958 # the generated man pages (default is the subroutine's section .3)
962 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
963 # then it will generate one additional man file for each entity
964 # documented in the real man page(s). These additional files
965 # only source the real man page, but without them the man command
966 # would be unable to find the correct page. The default is NO.
970 #---------------------------------------------------------------------------
971 # configuration options related to the XML output
972 #---------------------------------------------------------------------------
974 # If the GENERATE_XML tag is set to YES Doxygen will
975 # generate an XML file that captures the structure of
976 # the code including all documentation.
980 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
981 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
982 # put in front of it. If left blank `xml' will be used as the default path.
986 # The XML_SCHEMA tag can be used to specify an XML schema,
987 # which can be used by a validating XML parser to check the
988 # syntax of the XML files.
992 # The XML_DTD tag can be used to specify an XML DTD,
993 # which can be used by a validating XML parser to check the
994 # syntax of the XML files.
998 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
999 # dump the program listings (including syntax highlighting
1000 # and cross-referencing information) to the XML output. Note that
1001 # enabling this will significantly increase the size of the XML output.
1003 XML_PROGRAMLISTING = YES
1005 #---------------------------------------------------------------------------
1006 # configuration options for the AutoGen Definitions output
1007 #---------------------------------------------------------------------------
1009 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1010 # generate an AutoGen Definitions (see autogen.sf.net) file
1011 # that captures the structure of the code including all
1012 # documentation. Note that this feature is still experimental
1013 # and incomplete at the moment.
1015 GENERATE_AUTOGEN_DEF = NO
1017 #---------------------------------------------------------------------------
1018 # configuration options related to the Perl module output
1019 #---------------------------------------------------------------------------
1021 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
1022 # generate a Perl module file that captures the structure of
1023 # the code including all documentation. Note that this
1024 # feature is still experimental and incomplete at the
1027 GENERATE_PERLMOD = NO
1029 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1030 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
1031 # to generate PDF and DVI output from the Perl module output.
1035 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1036 # nicely formatted so it can be parsed by a human reader. This is useful
1037 # if you want to understand what is going on. On the other hand, if this
1038 # tag is set to NO the size of the Perl module output will be much smaller
1039 # and Perl will parse it just the same.
1041 PERLMOD_PRETTY = YES
1043 # The names of the make variables in the generated doxyrules.make file
1044 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1045 # This is useful so different doxyrules.make files included by the same
1046 # Makefile don't overwrite each other's variables.
1048 PERLMOD_MAKEVAR_PREFIX =
1050 #---------------------------------------------------------------------------
1051 # Configuration options related to the preprocessor
1052 #---------------------------------------------------------------------------
1054 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1055 # evaluate all C-preprocessor directives found in the sources and include
1058 ENABLE_PREPROCESSING = YES
1060 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1061 # names in the source code. If set to NO (the default) only conditional
1062 # compilation will be performed. Macro expansion can be done in a controlled
1063 # way by setting EXPAND_ONLY_PREDEF to YES.
1065 MACRO_EXPANSION = YES
1067 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1068 # then the macro expansion is limited to the macros specified with the
1069 # PREDEFINED and EXPAND_AS_DEFINED tags.
1071 EXPAND_ONLY_PREDEF = YES
1073 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1074 # in the INCLUDE_PATH (see below) will be search if a #include is found.
1076 SEARCH_INCLUDES = YES
1078 # The INCLUDE_PATH tag can be used to specify one or more directories that
1079 # contain include files that are not input files but should be processed by
1084 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1085 # patterns (like *.h and *.hpp) to filter out the header-files in the
1086 # directories. If left blank, the patterns specified with FILE_PATTERNS will
1089 INCLUDE_FILE_PATTERNS =
1091 # The PREDEFINED tag can be used to specify one or more macro names that
1092 # are defined before the preprocessor is started (similar to the -D option of
1093 # gcc). The argument of the tag is a list of macros of the form: name
1094 # or name=definition (no spaces). If the definition and the = are
1095 # omitted =1 is assumed. To prevent a macro definition from being
1096 # undefined via #undef or recursively expanded use the := operator
1097 # instead of the = operator.
1099 PREDEFINED = DOXYGEN \
1103 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1104 # this tag can be used to specify a list of macro names that should be expanded.
1105 # The macro definition that is found in the sources will be used.
1106 # Use the PREDEFINED tag if you want to use a different macro definition.
1110 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1111 # doxygen's preprocessor will remove all function-like macros that are alone
1112 # on a line, have an all uppercase name, and do not end with a semicolon. Such
1113 # function macros are typically used for boiler-plate code, and will confuse
1114 # the parser if not removed.
1116 SKIP_FUNCTION_MACROS = YES
1118 #---------------------------------------------------------------------------
1119 # Configuration::additions related to external references
1120 #---------------------------------------------------------------------------
1122 # The TAGFILES option can be used to specify one or more tagfiles.
1123 # Optionally an initial location of the external documentation
1124 # can be added for each tagfile. The format of a tag file without
1125 # this location is as follows:
1126 # TAGFILES = file1 file2 ...
1127 # Adding location for the tag files is done as follows:
1128 # TAGFILES = file1=loc1 "file2 = loc2" ...
1129 # where "loc1" and "loc2" can be relative or absolute paths or
1130 # URLs. If a location is present for each tag, the installdox tool
1131 # does not have to be run to correct the links.
1132 # Note that each tag file must have a unique name
1133 # (where the name does NOT include the path)
1134 # If a tag file is not located in the directory in which doxygen
1135 # is run, you must also specify the path to the tagfile here.
1139 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1140 # a tag file that is based on the input files it reads.
1142 GENERATE_TAGFILE = simgrid.tag
1144 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1145 # in the class index. If set to NO only the inherited external classes
1150 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1151 # in the modules index. If set to NO, only the current project's groups will
1154 EXTERNAL_GROUPS = NO
1156 # The PERL_PATH should be the absolute path and name of the perl script
1157 # interpreter (i.e. the result of `which perl').
1159 PERL_PATH = /usr/bin/perl
1161 #---------------------------------------------------------------------------
1162 # Configuration options related to the dot tool
1163 #---------------------------------------------------------------------------
1165 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1166 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1167 # or super classes. Setting the tag to NO turns the diagrams off. Note that
1168 # this option is superseded by the HAVE_DOT option below. This is only a
1169 # fallback. It is recommended to install and use dot, since it yields more
1172 CLASS_DIAGRAMS = YES
1174 # You can define message sequence charts within doxygen comments using the \msc
1175 # command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to
1176 # produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to
1177 # specify the directory where the mscgen tool resides. If left empty the tool is assumed to
1178 # be found in the default search path.
1182 # If set to YES, the inheritance and collaboration graphs will hide
1183 # inheritance and usage relations if the target is undocumented
1184 # or is not a class.
1186 HIDE_UNDOC_RELATIONS = YES
1188 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1189 # available from the path. This tool is part of Graphviz, a graph visualization
1190 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1191 # have no effect if this option is set to NO (the default)
1195 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1196 # will generate a graph for each documented class showing the direct and
1197 # indirect inheritance relations. Setting this tag to YES will force the
1198 # the CLASS_DIAGRAMS tag to NO.
1202 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1203 # will generate a graph for each documented class showing the direct and
1204 # indirect implementation dependencies (inheritance, containment, and
1205 # class references variables) of the class with other documented classes.
1207 COLLABORATION_GRAPH = YES
1209 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1210 # will generate a graph for groups, showing the direct groups dependencies
1214 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1215 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1220 # If set to YES, the inheritance and collaboration graphs will show the
1221 # relations between templates and their instances.
1223 TEMPLATE_RELATIONS = YES
1225 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1226 # tags are set to YES then doxygen will generate a graph for each documented
1227 # file showing the direct and indirect include dependencies of the file with
1228 # other documented files.
1232 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1233 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1234 # documented header file showing the documented files that directly or
1235 # indirectly include this file.
1237 INCLUDED_BY_GRAPH = YES
1239 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1240 # generate a call dependency graph for every global function or class method.
1241 # Note that enabling this option will significantly increase the time of a run.
1242 # So in most cases it will be better to enable call graphs for selected
1243 # functions only using the \callgraph command.
1247 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1248 # generate a caller dependency graph for every global function or class method.
1249 # Note that enabling this option will significantly increase the time of a run.
1250 # So in most cases it will be better to enable caller graphs for selected
1251 # functions only using the \callergraph command.
1255 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1256 # will graphical hierarchy of all classes instead of a textual one.
1258 GRAPHICAL_HIERARCHY = YES
1260 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1261 # then doxygen will show the dependencies a directory has on other directories
1262 # in a graphical way. The dependency relations are determined by the #include
1263 # relations between the files in the directories.
1265 DIRECTORY_GRAPH = YES
1267 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1268 # generated by dot. Possible values are png, jpg, or gif
1269 # If left blank png will be used.
1271 DOT_IMAGE_FORMAT = png
1273 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1274 # found. If left blank, it is assumed the dot tool can be found in the path.
1278 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1279 # contain dot files that are included in the documentation (see the
1280 # \dotfile command).
1284 # The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1285 # nodes that will be shown in the graph. If the number of nodes in a graph
1286 # becomes larger than this value, doxygen will truncate the graph, which is
1287 # visualized by representing a node as a red box. Note that doxygen will always
1288 # show the root nodes and its direct children regardless of this setting.
1290 DOT_GRAPH_MAX_NODES = 50
1292 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1293 # background. This is disabled by default, which results in a white background.
1294 # Warning: Depending on the platform used, enabling this option may lead to
1295 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1298 DOT_TRANSPARENT = NO
1300 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1301 # files in one run (i.e. multiple -o and -T options on the command line). This
1302 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1303 # support this, this feature is disabled by default.
1305 DOT_MULTI_TARGETS = NO
1307 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1308 # generate a legend page explaining the meaning of the various boxes and
1309 # arrows in the dot generated graphs.
1311 GENERATE_LEGEND = YES
1313 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1314 # remove the intermediate dot files that are used to generate
1315 # the various graphs.
1319 #---------------------------------------------------------------------------
1320 # Configuration::additions related to the search engine
1321 #---------------------------------------------------------------------------
1323 # The SEARCHENGINE tag specifies whether or not a search engine should be
1324 # used. If set to NO the values of all tags below this one will be ignored.