9 SimGrid should work out of the box on Linux, macOS, FreeBSD, and
10 Windows (under Windows, you need to install the Windows Subsystem
11 Linux to get more than the Java bindings).
19 To get all of SimGrid on Debian or Ubuntu, simply type one of the
20 following lines, or several lines if you need several languages.
22 .. code-block:: console
24 $ apt install libsimgrid-dev # if you want to develop in C or C++
25 $ apt install simgrid-java # if you want to develop in Java
26 $ apt install python3-simgrid # if you want to develop in Python
28 If you use the Nix_ package manager, the latest SimGrid release is packaged as ``simgrid`` in Nixpkgs_.
29 Previous SimGrid versions are maintained in `NUR-Kapack`_ and are available
30 pre-compiled in release and debug modes on the `capack cachix binary cache`_
31 — refer to `NUR-Kapack's documentation`_ for usage instructions.
33 If you use a pacman-based system (*e.g.*, Arch Linux and derived distributions),
34 the latest SimGrid is available in the `simgrid AUR package`_
35 — refer to `AUR official documentation`_ for installation instructions.
37 If you build pre-compiled packages for other distributions, drop us an
40 .. _Nix: https://nixos.org/
41 .. _Nixpkgs: https://github.com/NixOS/nixpkgs
42 .. _NUR-Kapack: https://github.com/oar-team/nur-kapack
43 .. _capack cachix binary cache: https://app.cachix.org/cache/capack
44 .. _NUR-Kapack's documentation: https://github.com/oar-team/nur-kapack
45 .. _simgrid AUR package: https://aur.archlinux.org/packages/simgrid/
46 .. _AUR official documentation: https://wiki.archlinux.org/title/Arch_User_Repository
48 .. _install_java_precompiled:
53 The jar file can be retrieved from the `Release page
54 <https://framagit.org/simgrid/simgrid/-/releases>`_. This file is
55 self-contained, including the native components for Linux, macOS and
56 Windows. Copy it to your project's classpath and you're set.
58 Nightly built Java Package
59 ^^^^^^^^^^^^^^^^^^^^^^^^^^
61 Head to the corresponding `GitHub Action <https://github.com/simgrid/simgrid/actions/workflows/jarfile.yml>`_
62 and pick the last green build. At the bottom of the build page, click on the ``jar-final`` artefact.
63 Open this zip file to find the jar you need. This jar can be used under Linux, Mac OSX or Windows, as you wish.
65 Binary Java Troubleshooting
66 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
68 Here are some error messages that you may get when trying to use the
71 Your architecture is not supported by this jarfile
72 If your system is not supported, you should compile your
73 own jarfile :ref:`by compiling SimGrid <install_src>` from the source.
74 Library not found: boost-context
75 You should obviously install the ``boost-context`` library on your
76 machine, for example with ``apt``.
78 .. _deprecation_policy:
80 Version numbering and deprecation
81 ---------------------------------
83 SimGrid tries to be both a research instrument that you can trust, and
84 a vivid project targeting the future issues. We have 4 stable versions
85 per year, numbered 3.24 or 3.25. Backward compatibility is ensured for
86 one year: Code compiling without warning on 3.24 will still compile
87 with 3.28, but maybe with some deprecation warnings. You should update
88 your SimGrid installation at least once a year and fix those
89 deprecation warnings: the compatibility wrappers are usually removed
90 after 4 versions. Another approach is to never update your SimGrid
91 installation, but we don't provide any support to old versions.
93 Interim versions (also called pre-versions) may be released between
94 stable releases. They are numbered 3.X.Y, with even Y (for example,
95 3.23.2 was released on July 8. 2019 as a pre-version of 3.24). These
96 versions should be as usable as regular stable releases, even if they
97 may be somewhat less tested and documented. They play no role in our
98 deprecation handling, and they are not really announced to not spam
101 Version numbered 3.X.Y with odd Y are git versions. They often work,
102 but no guarantee is given whatsoever (all releases are given "as is",
103 but that's even more so for these unreleased versions).
107 Installing from the Source
108 --------------------------
110 Getting the Dependencies
111 ^^^^^^^^^^^^^^^^^^^^^^^^
113 C++ compiler (either g++, clang, or icc).
114 We use the C++14 standard, and older compilers tend to fail on
115 us. It seems that g++ 5.0 or higher is required nowadays (because of
116 boost). SimGrid compiles well with `clang` or `icc` too.
118 SimGrid should build without Python. That is only needed by our regression test suite.
120 ``ccmake`` provides a nicer graphical interface compared to ``cmake``.
121 Press ``t`` in ``ccmake`` if you need to see absolutely all
122 configuration options (e.g., if your Python installation is not standard).
123 boost (at least v1.48, v1.59 recommended)
124 - On Debian / Ubuntu: ``apt install libboost-dev libboost-context-dev``
125 - On CentOS / Fedora: ``yum install boost-devel``
126 - On macOS with homebrew: ``brew install boost``
128 - On Debian / Ubuntu: ``apt install libeigen3-dev``
129 - On CentOS / Fedora: ``yum install eigen3-devel``
130 - On macOS with homebrew: ``brew install eigen``
132 - Debian / Ubuntu: ``apt install default-jdk libgcj18-dev`` (or
133 any version of libgcj)
134 - macOS or Windows: Grab a `full JDK <http://www.oracle.com/technetwork/java/javase/downloads>`_
136 For platform-specific details, please see below.
141 Grab the last **stable release** from `FramaGit
142 <https://framagit.org/simgrid/simgrid/-/releases>`_, and compile it as follows:
144 .. code-block:: console
146 $ tar xf simgrid-3-XX.tar.gz
148 $ cmake -DCMAKE_INSTALL_PREFIX=/opt/simgrid .
152 If you want to stay on the **bleeding edge**, get the current git version,
153 and recompile it as with stable archives. You may need some extra
156 .. code-block:: console
158 $ git clone https://framagit.org/simgrid/simgrid.git
160 $ cmake -DCMAKE_INSTALL_PREFIX=/opt/simgrid .
164 .. _install_src_config:
169 This section is about **compile-time options**, which are very
170 different from :ref:`run-time options <options>`. Compile-time options
171 fall into two categories. **SimGrid-specific options** define which part
172 of the framework to compile while **Generic options** are provided by
177 Our build system often gets mixed up if you change something on
178 your machine after the build configuration. For example, if
179 SimGrid fails to detect your fortran compiler, it is not enough to
180 install a fortran compiler. You also need to delete all Cmake
181 files, such as ``CMakeCache.txt``. Since Cmake also generates some
182 files in the tree, you may need to wipe out your complete tree and
183 start with a fresh one when you install new dependencies.
185 Another (better) solution is to :ref:`build out of the source tree
186 <install_cmake_outsrc>`.
188 Generic build-time options
189 """"""""""""""""""""""""""
191 These options specify, for example, the path to various system elements (Python
192 path, compiler to use, etc). In most case, CMake automatically discovers the
193 right value for these elements, but you can set them manually as needed.
194 Notably, such variables include ``CC`` and ``CXX``, defining the paths to the C
195 and C++ compilers; ``CFLAGS`` and ``CXXFLAGS`` specifying extra options to pass
196 to the C and C++ compilers; and ``PYTHON_EXECUTABLE`` specifying the path to the
199 The best way to discover the exact name of the option that you need to
200 change is to press ``t`` in the ``ccmake`` graphical interface, as all
201 options are shown (and documented) in the advanced mode.
203 Once you know their name, there are several ways to change the values of
204 build-time options. You can naturally use the ccmake graphical
205 interface for that, or you can use environment variables, or you can
206 prefer the ``-D`` flag of ``cmake``.
208 For example, you can change the compilers by issuing these commands to set some
209 environment variables before launching cmake:
211 .. code-block:: console
216 The same can be done by passing ``-D`` parameters to cmake, as follows.
217 Note that the dot at the end is mandatory (see :ref:`install_cmake_outsrc`).
219 .. code-block:: console
221 $ cmake -DCC=clang -DCXX=clang++ .
223 SimGrid compilation options
224 """""""""""""""""""""""""""
226 Here is the list of all SimGrid-specific compile-time options (the
227 default choice is in upper case).
229 CMAKE_INSTALL_PREFIX (path)
230 Where to install SimGrid (/opt/simgrid, /usr/local, or elsewhere).
232 enable_compile_optimizations (ON/off)
233 Ask the compiler to produce efficient code. You probably want to
234 leave this option activated, unless you plan to modify SimGrid itself:
235 efficient code takes more time to compile, and appears mangled to some debuggers.
237 enable_compile_warnings (on/OFF)
238 Ask the compiler to issue error messages whenever the source
239 code is not perfectly clean. If you are a SimGrid developer, you
240 have to activate this option to enforce the code quality. As a
241 regular user, this option is of little use.
243 enable_debug (ON/off)
244 Disabling this option discards all log messages of severity
245 debug or below at compile time (see :ref:`outcome_logs`). The resulting
246 code is marginaly faster than if you discard these messages at
247 runtime, but it obviously becomes impossible to get any debug
248 info from SimGrid when things go wrong.
250 enable_documentation (on/OFF)
251 Generates the documentation pages. Building the documentation is not
252 as easy as it used to be, and you should probably use the online
256 Generates the java bindings of SimGrid. You must also enable MSG for
259 enable_lib_in_jar (ON/off)
260 Embeds the native java bindings into the produced jar file.
263 Enables the *Link Time Optimization* in the C++ compiler.
264 This feature really speeds up the code produced, but it is fragile
265 with older gcc versions.
267 enable_maintainer_mode (on/OFF)
268 (dev only) Regenerates the XML parsers whenever the DTD is modified (requires flex and flexml).
270 enable_mallocators (ON/off)
271 Activates our internal memory caching mechanism. This produces faster
272 code, but it may fool the debuggers.
274 enable_model-checking (on/OFF)
275 Activates the formal verification mode. This will **hinder
276 simulation speed** even when the model checker is not activated at
280 Activates the :ref:`MSG <MSG_doc>` legacy interface.
283 Activates the ns-3 bindings. See section :ref:`model_ns3`.
286 Allows one to run MPI code on top of SimGrid.
288 enable_smpi_MBI_testsuite (on/OFF)
289 Adds many extra tests for the model checker module.
291 enable_smpi_MPICH3_testsuite (on/OFF)
292 Adds many extra tests for the MPI module.
294 minimal-bindings (on/OFF)
295 Take as few optional dependencies as possible, to get minimal
296 library bindings in Java and Python.
298 NS3_HINT (empty by default)
299 Alternative path into which ns-3 should be searched for.
301 SIMGRID_PYTHON_LIBDIR (auto-detected)
302 Where to install the Python module library. By default, it is set to the cmake Python3_SITEARCH variable if installing to /usr,
303 and a modified version of that variable if installing to another path. Just force another value if the auto-detected default
304 does not fit your setup.
306 SMPI_C_FLAGS, SMPI_CXX_FLAGS, SMPI_Fortran_FLAGS (string)
307 Default compiler options to use in smpicc, smpicxx, or smpiff.
308 This can be useful to set options like "-m32" or "-m64".
310 Reset the build configuration
311 """""""""""""""""""""""""""""
313 To empty the CMake cache (either when you add a new library or when
314 things go seriously wrong), simply delete your ``CMakeCache.txt``. You
315 may also want to directly edit this file in some circumstances.
317 .. _install_cmake_outsrc:
319 Out of Tree Compilation
320 ^^^^^^^^^^^^^^^^^^^^^^^
322 By default, the files produced during the compilation are placed in
323 the source directory. It is however often better to put them all in a
324 separate directory: cleaning the tree becomes as easy as removing this
325 directory, and you can have several such directories to test several
326 parameter sets or architectures.
328 For that, go to the directory where the files should be produced, and
329 invoke cmake (or ccmake) with the full path to the SimGrid source as
332 .. code-block:: console
339 Existing Compilation Targets
340 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
342 In most cases, compiling and installing SimGrid is enough:
344 .. code-block:: console
347 $ make install # try "sudo make install" if you don't have the permission to write
349 In addition, several compilation targets are provided in SimGrid. If
350 your system is well configured, the full list of targets is available
351 for completion when using the ``Tab`` key. Note that some of the
352 existing targets are not really for public consumption so don't worry
353 if some do not work for you.
355 - **make**: Build the core of SimGrid that gets installed, but not any example.
356 - **make tests**: Build the tests and examples.
357 - **make simgrid**: Build only the SimGrid library. Not any example nor the helper tools.
358 - **make s4u-comm-pingpong**: Build only this example (works for any example)
359 - **make java-all**: Build all Java examples and their dependencies
360 - **make clean**: Clean the results of a previous compilation
361 - **make install**: Install the project (doc/ bin/ lib/ include/)
362 - **make uninstall**: Uninstall the project (doc/ bin/ lib/ include/)
363 - **make dist**: Build a distribution archive (tar.gz)
364 - **make distcheck**: Check the dist (make + make dist + tests on the distribution)
365 - **make documentation**: Create SimGrid documentation
367 If you want to see what is really happening, try adding ``VERBOSE=1`` to
368 your compilation requests:
370 .. code-block:: console
374 .. _install_src_test:
379 Once everything is built, you may want to test the result. SimGrid
380 comes with an extensive set of regression tests (as described in the
381 @ref inside_tests "insider manual"). The tests are not built by
382 default, so you first have to build them with ``make tests``. You can
383 then run them with ``ctest``, that comes with CMake. We run them
384 every commit and the results are on `our Jenkins <https://ci.inria.fr/simgrid/>`_.
386 .. code-block:: console
388 $ make tests # Build the tests
389 $ ctest # Launch all tests
390 $ ctest -R s4u # Launch only the tests whose names match the string "s4u"
391 $ ctest -j4 # Launch all tests in parallel, at most 4 concurrent jobs
392 $ ctest --verbose # Display all details on what's going on
393 $ ctest --output-on-failure # Only get verbose for the tests that fail
395 $ ctest -R s4u -j4 --output-on-failure # You changed S4U and want to check that you \
396 # didn't break anything, huh? \
397 # That's fine, I do so all the time myself.
399 .. _install_cmake_mac:
401 macOS-specific instructions
402 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
404 SimGrid compiles like a charm with clang (version 3.0 or higher) on macOS:
406 .. code-block:: console
408 $ cmake -DCMAKE_C_COMPILER=/path/to/clang -DCMAKE_CXX_COMPILER=/path/to/clang++ .
412 Troubleshooting your macOS build.
414 CMake Error: Parse error in cache file build_dir/CMakeCache.txt. Offending entry: /SDKs/MacOSX10.8.sdk
415 This was reported with the XCode version of clang 4.1. The work
416 around is to edit the ``CMakeCache.txt`` file directly, to change
419 ``CMAKE_OSX_SYSROOT:PATH=/Applications/XCode.app/Contents/Developer/Platforms/MacOSX.platform/Developer``
421 You can safely ignore the warning about "-pthread" not being used, if it appears.
423 /usr/include does not seem to exist
424 This directory does not exist by default on modern macOS versions,
425 and you may need to create it with ``xcode-select -install``
427 .. _install_cmake_windows:
429 Windows-specific instructions
430 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
432 The best solution to get SimGrid working on windows is to install the
433 Ubuntu subsystem of Windows 10. All of SimGrid (but the model checker)
434 works in this setting.
436 Native builds not very well supported. Have a look to our `appveypor
438 <https://framagit.org/simgrid/simgrid/blob/master/.appveyor.yml>`_ to
439 see how we manage to use mingw-64 to build the DLL that the Java file
442 The drawback of MinGW-64 is that the produced DLL are not compatible
443 with MS Visual C. Some clang-based tools seem promising to fix this,
444 but this is of rather low priority for us. It it's important for you
445 and if you get it working, please @ref community_contact "tell us".
447 Python-specific instructions
448 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
450 Once you have the Python development headers installed as well as a
451 recent version of the `pybind11 <https://pybind11.readthedocs.io/en/stable/>`
452 module (version at least 2.4), recompiling the Python bindings from
453 the source should be as easy as:
455 .. code-block:: console
457 # cd simgrid-source-tree
458 $ python setup.py build install
460 Starting with SimGrid 3.13, it should even be possible to install
461 simgrid without downloading the source with pip:
463 .. code-block:: console
465 $ pip install simgrid
467 Java-specific instructions
468 ^^^^^^^^^^^^^^^^^^^^^^^^^^
470 Once you have the `full JDK <http://www.oracle.com/technetwork/java/javase/downloads>`_ installed,
471 things should be as simple as:
473 .. code-block:: console
475 $ cmake -Denable_java=ON -Dminimal-bindings=ON .
476 $ make simgrid-java_jar # Only build the jarfile
478 After the compilation, the file ```simgrid.jar``` is produced in the
481 **Troubleshooting Java Builds**
483 Sometimes, the build system fails to find the JNI headers. First locate them as follows:
485 .. code-block:: console
488 /usr/lib/jvm/java-8-openjdk-amd64/include/jni.h
489 /usr/lib/jvm/java-9-openjdk-amd64/include/jni.h
490 /usr/lib/jvm/java-10-openjdk-amd64/include/jni.h
493 Then, set the JAVA_INCLUDE_PATH environment variable to the right
494 path, and relaunch cmake. If you have several versions of JNI installed
495 (as above), pick the one corresponding to the report of
498 .. code-block:: console
500 $ export JAVA_INCLUDE_PATH=/usr/lib/jvm/java-8-openjdk-amd64/include/
501 $ cmake -Denable_java=ON .
504 Note that the filename ```jni.h``` was removed from the path.
506 Linux Multi-Arch specific instructions
507 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
509 On a multiarch x86_64 Linux, it should be possible to compile a 32-bit
510 version of SimGrid with something like:
512 .. code-block:: console
517 PKG_CONFIG_LIBDIR=/usr/lib/i386-linux-gnu/pkgconfig/ \
519 -DCMAKE_SYSTEM_PROCESSOR=i386 \
520 -DCMAKE_Fortran_COMPILER=/some/path/to/i686-linux-gnu-gfortran \
521 -DGFORTRAN_EXE=/some/path/to/i686-linux-gnu-gfortran \
522 -DSMPI_C_FLAGS=-m32 \
523 -DSMPI_CXX_FLAGS=-m32 \
524 -DSMPI_Fortran_FLAGS=-m32
526 If needed, implement ``i686-linux-gnu-gfortran`` as a script:
528 .. code-block:: shell
531 exec gfortran -m32 "$@"