-set(CMAKE_MODULE_PATH
-${CMAKE_MODULE_PATH}
-${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/Modules
-)
+set(CMAKE_MODULE_PATH
+ ${CMAKE_MODULE_PATH}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/Modules
+ )
# x86_64
# x86
# i.86
IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86")
- IF(${ARCH_32_BITS})
- set(PROCESSOR_i686 1)
- set(SIMGRID_SYSTEM_PROCESSOR "${CMAKE_SYSTEM_PROCESSOR}")
- message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}")
- ELSE(${ARCH_32_BITS})
- message(STATUS "System processor: amd64")
- set(SIMGRID_SYSTEM_PROCESSOR "amd64")
- set(PROCESSOR_x86_64 1)
- set(PROCESSOR_i686 0)
- ENDIF(${ARCH_32_BITS})
- set(HAVE_RAWCTX 1)
-
+ IF(${ARCH_32_BITS})
+ set(PROCESSOR_i686 1)
+ set(SIMGRID_SYSTEM_PROCESSOR "${CMAKE_SYSTEM_PROCESSOR}")
+ message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}")
+ ELSE(${ARCH_32_BITS})
+ message(STATUS "System processor: amd64")
+ set(SIMGRID_SYSTEM_PROCESSOR "amd64")
+ set(PROCESSOR_x86_64 1)
+ set(PROCESSOR_i686 0)
+ ENDIF(${ARCH_32_BITS})
+ set(HAVE_RAWCTX 1)
+
ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^alpha")
- message(STATUS "System processor: alpha")
-
+ message(STATUS "System processor: alpha")
+
ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^arm")
- # Subdir is "arm" for both big-endian (arm) and little-endian (armel).
- message(STATUS "System processor: arm")
-
+ # Subdir is "arm" for both big-endian (arm) and little-endian (armel).
+ message(STATUS "System processor: arm")
+
ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^mips")
- # mips* machines are bi-endian mostly so processor does not tell
- # endianess of the underlying system.
- message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "mips" "mipsel" "mipseb")
-
+ # mips* machines are bi-endian mostly so processor does not tell
+ # endianess of the underlying system.
+ message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "mips" "mipsel" "mipseb")
+
ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)64")
- message(STATUS "System processor: ppc64")
-
+ message(STATUS "System processor: ppc64")
+
ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)")
- message(STATUS "System processor: ppc")
-
+ message(STATUS "System processor: ppc")
+
ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^sparc")
- # Both flavours can run on the same processor
- message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "sparc" "sparcv9")
-
+ # Both flavours can run on the same processor
+ message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "sparc" "sparcv9")
+
ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(parisc|hppa)")
- message(STATUS "System processor: parisc" "parisc64")
-
+ message(STATUS "System processor: parisc" "parisc64")
+
ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^s390")
- # s390 binaries can run on s390x machines
- message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "s390" "s390x")
-
+ # s390 binaries can run on s390x machines
+ message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "s390" "s390x")
+
ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^sh")
- message(STATUS "System processor: sh")
-
+ message(STATUS "System processor: sh")
+
ELSE(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64") #PROCESSOR NOT fIND
- message(STATUS "PROCESSOR NOT FOUND: ${CMAKE_SYSTEM_PROCESSOR}")
-
+ message(STATUS "PROCESSOR NOT FOUND: ${CMAKE_SYSTEM_PROCESSOR}")
+
ENDIF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86")
message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}")
include(FindGraphviz)
if(WIN32)
-include(FindPcreWin)
+ include(FindPcreWin)
else(WIN32)
-include(FindPCRE)
+ include(FindPCRE)
endif(WIN32)
set(HAVE_GTNETS 0)
-if(enable_gtnets)
- include(FindGTnets)
+if(enable_gtnets)
+ include(FindGTnets)
endif(enable_gtnets)
if(enable_smpi)
- include(FindF2c)
- if(HAVE_F2C_H)
- SET(HAVE_SMPI 1)
- endif(HAVE_F2C_H)
+ include(FindF2c)
+ if(HAVE_F2C_H)
+ SET(HAVE_SMPI 1)
+ endif(HAVE_F2C_H)
endif(enable_smpi)
if(enable_lua)
- include(FindLua51Simgrid)
+ include(FindLua51Simgrid)
endif(enable_lua)
set(HAVE_NS3 0)
if(enable_ns3)
- include(FindNS3)
+ include(FindNS3)
endif(enable_ns3)
# Checks for header libraries functions.
#Check if __thread is defined
execute_process(
-COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_thread_storage.c"
-WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-RESULT_VARIABLE HAVE_thread_storage_run
-)
+ COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_thread_storage.c"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ RESULT_VARIABLE HAVE_thread_storage_run
+ )
if(HAVE_thread_storage_run)
- set(HAVE_THREAD_LOCAL_STORAGE 0)
+ set(HAVE_THREAD_LOCAL_STORAGE 0)
else(HAVE_thread_storage_run)
- set(HAVE_THREAD_LOCAL_STORAGE 1)
+ set(HAVE_THREAD_LOCAL_STORAGE 1)
endif(HAVE_thread_storage_run)
# Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
ENDIF(NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND NOT "${CMAKE_SYSTEM}" MATCHES "GNU")
if(WIN32) #THOSE FILES ARE FUNCTIONS ARE NOT DETECTED BUT THEY SHOULD...
- set(HAVE_UCONTEXT_H 1)
- set(HAVE_MAKECONTEXT 1)
- set(HAVE_SNPRINTF 1)
- set(HAVE_VSNPRINTF 1)
+ set(HAVE_UCONTEXT_H 1)
+ set(HAVE_MAKECONTEXT 1)
+ set(HAVE_SNPRINTF 1)
+ set(HAVE_VSNPRINTF 1)
endif(WIN32)
set(CONTEXT_UCONTEXT 0)
SET(HAVE_TRACING 1)
if(enable_tracing)
- SET(HAVE_TRACING 1)
-else(enable_tracing)
- SET(HAVE_TRACING 0)
+ SET(HAVE_TRACING 1)
+else(enable_tracing)
+ SET(HAVE_TRACING 0)
endif(enable_tracing)
if(enable_jedule)
- SET(HAVE_JEDULE 1)
+ SET(HAVE_JEDULE 1)
endif(enable_jedule)
if(enable_latency_bound_tracking)
- SET(HAVE_LATENCY_BOUND_TRACKING 1)
+ SET(HAVE_LATENCY_BOUND_TRACKING 1)
else(enable_latency_bound_tracking)
if(enable_gtnets)
message(STATUS "Warning : Turning latency_bound_tracking to ON because GTNeTs is ON")
endif(enable_latency_bound_tracking)
if(enable_model-checking AND HAVE_MMAP)
- SET(HAVE_MC 1)
- SET(MMALLOC_WANT_OVERRIDE_LEGACY 1)
+ SET(HAVE_MC 1)
+ SET(MMALLOC_WANT_OVERRIDE_LEGACY 1)
else(enable_model-checking AND HAVE_MMAP)
- SET(HAVE_MC 0)
- SET(MMALLOC_WANT_OVERRIDE_LEGACY 0)
+ SET(HAVE_MC 0)
+ SET(MMALLOC_WANT_OVERRIDE_LEGACY 0)
endif(enable_model-checking AND HAVE_MMAP)
#--------------------------------------------------------------------------------------------------
CHECK_TYPE_SIZE(int SIZEOF_INT)
CHECK_TYPE_SIZE(void* SIZEOF_VOIDP)
-
#--------------------------------------------------------------------------------------------------
### Initialize of CONTEXT THREADS
if(pthread)
- set(pthread 1)
+ set(pthread 1)
elseif(pthread)
- set(pthread 0)
+ set(pthread 0)
endif(pthread)
if(pthread)
- ### Test that we have a way to create semaphores
-
- if(HAVE_SEM_OPEN_LIB)
-
- exec_program(
- "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_open.c -lpthread -o testprog"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
- )
-
- if(HAVE_SEM_OPEN_compil)
- set(HAVE_SEM_OPEN 0)
- message(STATUS "Warning: sem_open not compilable")
- message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
- else(HAVE_SEM_OPEN_compil)
- set(HAVE_SEM_OPEN 1)
- message(STATUS "sem_open is compilable")
- endif(HAVE_SEM_OPEN_compil)
-
- exec_program("${CMAKE_BINARY_DIR}/testprog" RETURN_VALUE HAVE_SEM_OPEN_run OUTPUT_VARIABLE var_compil)
- file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
-
- if(NOT HAVE_SEM_OPEN_run)
- set(HAVE_SEM_OPEN 1)
- message(STATUS "sem_open is executable")
- else(NOT HAVE_SEM_OPEN_run)
- set(HAVE_SEM_OPEN 0)
- message(STATUS "Warning: sem_open not executable")
- endif(NOT HAVE_SEM_OPEN_run)
-
- else(HAVE_SEM_OPEN_LIB)
- set(HAVE_SEM_OPEN 0)
- endif(HAVE_SEM_OPEN_LIB)
-
- if(HAVE_SEM_INIT_LIB)
- exec_program(
- "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_init.c -lpthread -o testprog"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_SEM_INIT_compil
- )
-
- if(HAVE_SEM_INIT_compil)
- set(HAVE_SEM_INIT 0)
- message(STATUS "Warning: sem_init not compilable")
- message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
- else(HAVE_SEM_INIT_compil)
- set(HAVE_SEM_INIT 1)
- message(STATUS "sem_init is compilable")
- endif(HAVE_SEM_INIT_compil)
-
- exec_program("${CMAKE_BINARY_DIR}/testprog" RETURN_VALUE HAVE_SEM_INIT_run OUTPUT_VARIABLE var_compil)
- file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
-
- if(NOT HAVE_SEM_INIT_run)
- set(HAVE_SEM_INIT 1)
- message(STATUS "sem_init is executable")
- else(NOT HAVE_SEM_INIT_run)
- set(HAVE_SEM_INIT 0)
- message(STATUS "Warning: sem_init not executable")
- endif(NOT HAVE_SEM_INIT_run)
- endif(HAVE_SEM_INIT_LIB)
-
- if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
- message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
- endif(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
-
- ### Test that we have a way to timewait for semaphores
-
- if(HAVE_SEM_TIMEDWAIT_LIB)
-
- execute_process(
- COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_timedwait.c -lpthread"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_SEM_TIMEDWAIT_run
- )
-
- if(HAVE_SEM_TIMEDWAIT_run)
- set(HAVE_SEM_TIMEDWAIT 0)
- message(STATUS "timedwait not compilable")
- else(HAVE_SEM_TIMEDWAIT_run)
- set(HAVE_SEM_TIMEDWAIT 1)
- message(STATUS "timedwait is compilable")
- endif(HAVE_SEM_TIMEDWAIT_run)
- endif(HAVE_SEM_TIMEDWAIT_LIB)
-
- ### HAVE_MUTEX_TIMEDLOCK
-
- if(HAVE_MUTEX_TIMEDLOCK_LIB)
-
- execute_process(
- COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_mutex_timedlock.c -lpthread"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_MUTEX_TIMEDLOCK_run
- )
-
- if(HAVE_MUTEX_TIMEDLOCK_run)
- set(HAVE_MUTEX_TIMEDLOCK 0)
- message(STATUS "timedlock not compilable")
- else(HAVE_MUTEX_TIMEDLOCK_run)
- message(STATUS "timedlock is compilable")
- set(HAVE_MUTEX_TIMEDLOCK 1)
- endif(HAVE_MUTEX_TIMEDLOCK_run)
- endif(HAVE_MUTEX_TIMEDLOCK_LIB)
+ ### Test that we have a way to create semaphores
+
+ if(HAVE_SEM_OPEN_LIB)
+
+ exec_program(
+ "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_open.c -lpthread -o testprog"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
+ )
+
+ if(HAVE_SEM_OPEN_compil)
+ set(HAVE_SEM_OPEN 0)
+ message(STATUS "Warning: sem_open not compilable")
+ message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
+ else(HAVE_SEM_OPEN_compil)
+ set(HAVE_SEM_OPEN 1)
+ message(STATUS "sem_open is compilable")
+ endif(HAVE_SEM_OPEN_compil)
+
+ exec_program("${CMAKE_BINARY_DIR}/testprog" RETURN_VALUE HAVE_SEM_OPEN_run OUTPUT_VARIABLE var_compil)
+ file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
+
+ if(NOT HAVE_SEM_OPEN_run)
+ set(HAVE_SEM_OPEN 1)
+ message(STATUS "sem_open is executable")
+ else(NOT HAVE_SEM_OPEN_run)
+ set(HAVE_SEM_OPEN 0)
+ message(STATUS "Warning: sem_open not executable")
+ endif(NOT HAVE_SEM_OPEN_run)
+
+ else(HAVE_SEM_OPEN_LIB)
+ set(HAVE_SEM_OPEN 0)
+ endif(HAVE_SEM_OPEN_LIB)
+
+ if(HAVE_SEM_INIT_LIB)
+ exec_program(
+ "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_init.c -lpthread -o testprog"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_SEM_INIT_compil
+ )
+
+ if(HAVE_SEM_INIT_compil)
+ set(HAVE_SEM_INIT 0)
+ message(STATUS "Warning: sem_init not compilable")
+ message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
+ else(HAVE_SEM_INIT_compil)
+ set(HAVE_SEM_INIT 1)
+ message(STATUS "sem_init is compilable")
+ endif(HAVE_SEM_INIT_compil)
+
+ exec_program("${CMAKE_BINARY_DIR}/testprog" RETURN_VALUE HAVE_SEM_INIT_run OUTPUT_VARIABLE var_compil)
+ file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
+
+ if(NOT HAVE_SEM_INIT_run)
+ set(HAVE_SEM_INIT 1)
+ message(STATUS "sem_init is executable")
+ else(NOT HAVE_SEM_INIT_run)
+ set(HAVE_SEM_INIT 0)
+ message(STATUS "Warning: sem_init not executable")
+ endif(NOT HAVE_SEM_INIT_run)
+ endif(HAVE_SEM_INIT_LIB)
+
+ if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
+ message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
+ endif(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
+
+ ### Test that we have a way to timewait for semaphores
+
+ if(HAVE_SEM_TIMEDWAIT_LIB)
+
+ execute_process(
+ COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_timedwait.c -lpthread"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_SEM_TIMEDWAIT_run
+ )
+
+ if(HAVE_SEM_TIMEDWAIT_run)
+ set(HAVE_SEM_TIMEDWAIT 0)
+ message(STATUS "timedwait not compilable")
+ else(HAVE_SEM_TIMEDWAIT_run)
+ set(HAVE_SEM_TIMEDWAIT 1)
+ message(STATUS "timedwait is compilable")
+ endif(HAVE_SEM_TIMEDWAIT_run)
+ endif(HAVE_SEM_TIMEDWAIT_LIB)
+
+ ### HAVE_MUTEX_TIMEDLOCK
+
+ if(HAVE_MUTEX_TIMEDLOCK_LIB)
+
+ execute_process(
+ COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_mutex_timedlock.c -lpthread"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_MUTEX_TIMEDLOCK_run
+ )
+
+ if(HAVE_MUTEX_TIMEDLOCK_run)
+ set(HAVE_MUTEX_TIMEDLOCK 0)
+ message(STATUS "timedlock not compilable")
+ else(HAVE_MUTEX_TIMEDLOCK_run)
+ message(STATUS "timedlock is compilable")
+ set(HAVE_MUTEX_TIMEDLOCK 1)
+ endif(HAVE_MUTEX_TIMEDLOCK_run)
+ endif(HAVE_MUTEX_TIMEDLOCK_LIB)
endif(pthread)
-# AC_CHECK_MCSC(mcsc=yes, mcsc=no)
+# AC_CHECK_MCSC(mcsc=yes, mcsc=no)
set(mcsc_flags "")
if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
- set(mcsc_flags "-D_XOPEN_SOURCE")
+ set(mcsc_flags "-D_XOPEN_SOURCE")
endif(CMAKE_SYSTEM_NAME MATCHES "Darwin")
if(WIN32)
- if(ARCH_32_BITS)
+ if(ARCH_32_BITS)
set(mcsc_flags "-D_XBT_WIN32 -D_I_X86_ -I${CMAKE_HOME_DIRECTORY}/include/xbt -I${CMAKE_HOME_DIRECTORY}/src/xbt")
- else(ARCH_32_BITS)
+ else(ARCH_32_BITS)
set(mcsc_flags "-D_XBT_WIN32 -D_AMD64_ -I${CMAKE_HOME_DIRECTORY}/include/xbt -I${CMAKE_HOME_DIRECTORY}/src/xbt")
- endif(ARCH_32_BITS)
+ endif(ARCH_32_BITS)
endif(WIN32)
IF(CMAKE_CROSSCOMPILING)
- IF(WIN32)
- set(windows_context "yes")
- set(IS_WINDOWS 1)
- ENDIF(WIN32)
+ IF(WIN32)
+ set(windows_context "yes")
+ set(IS_WINDOWS 1)
+ ENDIF(WIN32)
ELSE(CMAKE_CROSSCOMPILING)
- file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
- file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
- exec_program(
- "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_AC_CHECK_MCSC.c ${mcsc_flags} -o testprog"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/
- OUTPUT_VARIABLE COMPILE_mcsc_VAR)
-
- if(NOT COMPILE_mcsc_VAR)
- message(STATUS "prog_AC_CHECK_MCSC.c is compilable")
- exec_program("${CMAKE_BINARY_DIR}/testprog" OUTPUT_VARIABLE var_compil)
- else(NOT COMPILE_mcsc_VAR)
- message(STATUS "prog_AC_CHECK_MCSC.c is not compilable")
- endif(NOT COMPILE_mcsc_VAR)
- file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
-
- if(EXISTS "${CMAKE_BINARY_DIR}/conftestval")
- file(READ "${CMAKE_BINARY_DIR}/conftestval" mcsc)
- STRING(REPLACE "\n" "" mcsc "${mcsc}")
- if(mcsc)
- set(mcsc "yes")
- set(HAVE_UCONTEXT_H 1)
- else(mcsc)
- set(mcsc "no")
- endif(mcsc)
- else(EXISTS "${CMAKE_BINARY_DIR}/conftestval")
- set(mcsc "no")
- endif(EXISTS "${CMAKE_BINARY_DIR}/conftestval")
-
- message(STATUS "mcsc: ${mcsc}")
+ file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
+ file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
+ exec_program(
+ "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_AC_CHECK_MCSC.c ${mcsc_flags} -o testprog"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/
+ OUTPUT_VARIABLE COMPILE_mcsc_VAR)
+
+ if(NOT COMPILE_mcsc_VAR)
+ message(STATUS "prog_AC_CHECK_MCSC.c is compilable")
+ exec_program("${CMAKE_BINARY_DIR}/testprog" OUTPUT_VARIABLE var_compil)
+ else(NOT COMPILE_mcsc_VAR)
+ message(STATUS "prog_AC_CHECK_MCSC.c is not compilable")
+ endif(NOT COMPILE_mcsc_VAR)
+ file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
+
+ if(EXISTS "${CMAKE_BINARY_DIR}/conftestval")
+ file(READ "${CMAKE_BINARY_DIR}/conftestval" mcsc)
+ STRING(REPLACE "\n" "" mcsc "${mcsc}")
+ if(mcsc)
+ set(mcsc "yes")
+ set(HAVE_UCONTEXT_H 1)
+ else(mcsc)
+ set(mcsc "no")
+ endif(mcsc)
+ else(EXISTS "${CMAKE_BINARY_DIR}/conftestval")
+ set(mcsc "no")
+ endif(EXISTS "${CMAKE_BINARY_DIR}/conftestval")
+
+ message(STATUS "mcsc: ${mcsc}")
ENDIF(CMAKE_CROSSCOMPILING)
if(mcsc MATCHES "no" AND pthread)
- if(HAVE_WINDOWS_H)
- set(windows_context "yes")
- set(IS_WINDOWS 1)
- elseif(HAVE_WINDOWS_H)
- message(FATAL_ERROR "no appropriate backend found")
- endif(HAVE_WINDOWS_H)
+ if(HAVE_WINDOWS_H)
+ set(windows_context "yes")
+ set(IS_WINDOWS 1)
+ elseif(HAVE_WINDOWS_H)
+ message(FATAL_ERROR "no appropriate backend found")
+ endif(HAVE_WINDOWS_H)
endif(mcsc MATCHES "no" AND pthread)
#Only windows
if(WIN32)
- if(NOT HAVE_WINDOWS_H)
- message(FATAL_ERROR "no appropriate backend found windows")
- endif(NOT HAVE_WINDOWS_H)
+ if(NOT HAVE_WINDOWS_H)
+ message(FATAL_ERROR "no appropriate backend found windows")
+ endif(NOT HAVE_WINDOWS_H)
endif(WIN32)
if(windows_context MATCHES "yes")
- message(STATUS "Context change to windows")
+ message(STATUS "Context change to windows")
endif(windows_context MATCHES "yes")
#If can have both context
if(mcsc)
- set(CONTEXT_UCONTEXT 1)
+ set(CONTEXT_UCONTEXT 1)
endif(mcsc)
if(pthread)
- set(CONTEXT_THREADS 1)
+ set(CONTEXT_THREADS 1)
endif(pthread)
-
###############
## GIT version check
##
if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/ AND NOT WIN32)
-exec_program("git remote | head -n 1" OUTPUT_VARIABLE remote RETURN_VALUE ret)
-exec_program("git config --get remote.${remote}.url" OUTPUT_VARIABLE url RETURN_VALUE ret)
-
-if(url)
- exec_program("git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --oneline -1" OUTPUT_VARIABLE "GIT_VERSION")
- message(STATUS "Git version: ${GIT_VERSION}")
- exec_program("git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --format=%ai ." OUTPUT_VARIABLE "GIT_DATE")
- message(STATUS "Git date: ${GIT_DATE}")
- string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
- STRING(REPLACE " +0000" "" GIT_DATE ${GIT_DATE})
- STRING(REPLACE " " "~" GIT_DATE ${GIT_DATE})
- STRING(REPLACE ":" "-" GIT_DATE ${GIT_DATE})
-endif(url)
+ exec_program("git remote | head -n 1" OUTPUT_VARIABLE remote RETURN_VALUE ret)
+ exec_program("git config --get remote.${remote}.url" OUTPUT_VARIABLE url RETURN_VALUE ret)
+
+ if(url)
+ exec_program("git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --oneline -1" OUTPUT_VARIABLE "GIT_VERSION")
+ message(STATUS "Git version: ${GIT_VERSION}")
+ exec_program("git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --format=%ai ." OUTPUT_VARIABLE "GIT_DATE")
+ message(STATUS "Git date: ${GIT_DATE}")
+ string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
+ STRING(REPLACE " +0000" "" GIT_DATE ${GIT_DATE})
+ STRING(REPLACE " " "~" GIT_DATE ${GIT_DATE})
+ STRING(REPLACE ":" "-" GIT_DATE ${GIT_DATE})
+ endif(url)
endif(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/ AND NOT WIN32)
###################################
##
IF(NOT CMAKE_CROSSCOMPILING)
-# Check architecture signature begin
-try_run(RUN_GRAS_VAR COMPILE_GRAS_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_GRAS_ARCH.c
- RUN_OUTPUT_VARIABLE var1
- )
-if(BIGENDIAN)
- set(val_big "B${var1}")
- set(GRAS_BIGENDIAN 1)
-else(BIGENDIAN)
- set(val_big "l${var1}")
- set(GRAS_BIGENDIAN 0)
-endif(BIGENDIAN)
-
-# The syntax of this magic string is given in src/xbt/datadesc/ddt_convert.c
-# It kinda matches the values that the xbt_arch_desc_t structure can take
-
-# Basically, the syntax is one char l or B for endianness (little or Big)
-# then there is a bunch of blocks separated by _.
-# C block is for char, I block for integers, P block for pointers and
-# D block for floating points
-# For each block there is an amount of chuncks separated by :, each of
-# them describing a data size. For example there is only one chunk
-# in the char block, because no architecture provide several sizes
-# of chars. In integer block, there is 4 chunks: "short int", "int",
-# "long int", "long long int". There is 2 pointer chunks for data
-# pointers and pointers on functions (thanks to the AMD64 madness).
-# Thee two floating points chuncks are for "float" and "double".
-# Each chunk is of the form datasize/minimal_alignment_size
-
-# These informations are used to convert a data stream from one
-# formalism to another. Only the GRAS_ARCH is transfered in the
-# stream, and it it of cruxial importance to keep these detection
-# information here synchronized with the data hardcoded in the
-# source in src/xbt/datadesc/ddt_convert.c
-
-# If you add something here (like a previously unknown architecture),
-# please add it to the source code too.
-# Please do not modify stuff here since it'd break the GRAS protocol.
-# If you really need to change stuff, please also bump
-# GRAS_PROTOCOL_VERSION in src/gras/Msg/msg_interface.h
-
-SET(GRAS_THISARCH "none")
-
-if(val_big MATCHES "l_C:1/1:_I:2/1:4/1:4/1:8/1:_P:4/1:4/1:_D:4/1:8/1:")
- #gras_arch=0; gras_size=32; gras_arch_name=little32_1;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 0)
-endif(val_big MATCHES "l_C:1/1:_I:2/1:4/1:4/1:8/1:_P:4/1:4/1:_D:4/1:8/1:")
-if(val_big MATCHES "l_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
- #gras_arch=1; gras_size=32; gras_arch_name=little32_2;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 1)
-endif(val_big MATCHES "l_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
-if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
- #gras_arch=2; gras_size=32; gras_arch_name=little32_4;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 2)
-endif(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
-if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
- #gras_arch=3; gras_size=32; gras_arch_name=little32_8;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 3)
-endif(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
-if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
- #gras_arch=4; gras_size=64; gras_arch_name=little64;
- SET(GRAS_ARCH_32_BITS 0)
- SET(GRAS_THISARCH 4)
-endif(val_big MATCHES "l_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
-if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:8/8:8/8:_D:4/4:8/8:")
- #gras_arch=5; gras_size=64; gras_arch_name=little64_2;
- SET(GRAS_ARCH_32_BITS 0)
- SET(GRAS_THISARCH 5)
-endif(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:8/8:8/8:_D:4/4:8/8:")
-
-if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
- #gras_arch=6; gras_size=32; gras_arch_name=big32_8;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 6)
-endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
-if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/4:")
- #gras_arch=7; gras_size=32; gras_arch_name=big32_8_4;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 7)
-endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/4:")
-if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
- #gras_arch=8; gras_size=32; gras_arch_name=big32_4;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 8)
-endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
-if(val_big MATCHES "B_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
- #gras_arch=9; gras_size=32; gras_arch_name=big32_2;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 9)
-endif(val_big MATCHES "B_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
-if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
- #gras_arch=10; gras_size=64; gras_arch_name=big64;
- SET(GRAS_ARCH_32_BITS 0)
- SET(GRAS_THISARCH 10)
-endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
-if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/4:")
- #gras_arch=11; gras_size=64; gras_arch_name=big64_8_4;
- SET(GRAS_ARCH_32_BITS 0)
- SET(GRAS_THISARCH 11)
-endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/4:")
-
-if(GRAS_THISARCH MATCHES "none")
+ # Check architecture signature begin
+ try_run(RUN_GRAS_VAR COMPILE_GRAS_VAR
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_GRAS_ARCH.c
+ RUN_OUTPUT_VARIABLE var1
+ )
+ if(BIGENDIAN)
+ set(val_big "B${var1}")
+ set(GRAS_BIGENDIAN 1)
+ else(BIGENDIAN)
+ set(val_big "l${var1}")
+ set(GRAS_BIGENDIAN 0)
+ endif(BIGENDIAN)
+
+ # The syntax of this magic string is given in src/xbt/datadesc/ddt_convert.c
+ # It kinda matches the values that the xbt_arch_desc_t structure can take
+
+ # Basically, the syntax is one char l or B for endianness (little or Big)
+ # then there is a bunch of blocks separated by _.
+ # C block is for char, I block for integers, P block for pointers and
+ # D block for floating points
+ # For each block there is an amount of chuncks separated by :, each of
+ # them describing a data size. For example there is only one chunk
+ # in the char block, because no architecture provide several sizes
+ # of chars. In integer block, there is 4 chunks: "short int", "int",
+ # "long int", "long long int". There is 2 pointer chunks for data
+ # pointers and pointers on functions (thanks to the AMD64 madness).
+ # Thee two floating points chuncks are for "float" and "double".
+ # Each chunk is of the form datasize/minimal_alignment_size
+
+ # These informations are used to convert a data stream from one
+ # formalism to another. Only the GRAS_ARCH is transfered in the
+ # stream, and it it of cruxial importance to keep these detection
+ # information here synchronized with the data hardcoded in the
+ # source in src/xbt/datadesc/ddt_convert.c
+
+ # If you add something here (like a previously unknown architecture),
+ # please add it to the source code too.
+ # Please do not modify stuff here since it'd break the GRAS protocol.
+ # If you really need to change stuff, please also bump
+ # GRAS_PROTOCOL_VERSION in src/gras/Msg/msg_interface.h
+
+ SET(GRAS_THISARCH "none")
+
+ if(val_big MATCHES "l_C:1/1:_I:2/1:4/1:4/1:8/1:_P:4/1:4/1:_D:4/1:8/1:")
+ #gras_arch=0; gras_size=32; gras_arch_name=little32_1;
+ SET(GRAS_ARCH_32_BITS 1)
+ SET(GRAS_THISARCH 0)
+ endif(val_big MATCHES "l_C:1/1:_I:2/1:4/1:4/1:8/1:_P:4/1:4/1:_D:4/1:8/1:")
+ if(val_big MATCHES "l_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
+ #gras_arch=1; gras_size=32; gras_arch_name=little32_2;
+ SET(GRAS_ARCH_32_BITS 1)
+ SET(GRAS_THISARCH 1)
+ endif(val_big MATCHES "l_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
+ if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
+ #gras_arch=2; gras_size=32; gras_arch_name=little32_4;
+ SET(GRAS_ARCH_32_BITS 1)
+ SET(GRAS_THISARCH 2)
+ endif(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
+ if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
+ #gras_arch=3; gras_size=32; gras_arch_name=little32_8;
+ SET(GRAS_ARCH_32_BITS 1)
+ SET(GRAS_THISARCH 3)
+ endif(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
+ if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
+ #gras_arch=4; gras_size=64; gras_arch_name=little64;
+ SET(GRAS_ARCH_32_BITS 0)
+ SET(GRAS_THISARCH 4)
+ endif(val_big MATCHES "l_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
+ if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:8/8:8/8:_D:4/4:8/8:")
+ #gras_arch=5; gras_size=64; gras_arch_name=little64_2;
+ SET(GRAS_ARCH_32_BITS 0)
+ SET(GRAS_THISARCH 5)
+ endif(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:8/8:8/8:_D:4/4:8/8:")
+
+ if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
+ #gras_arch=6; gras_size=32; gras_arch_name=big32_8;
+ SET(GRAS_ARCH_32_BITS 1)
+ SET(GRAS_THISARCH 6)
+ endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
+ if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/4:")
+ #gras_arch=7; gras_size=32; gras_arch_name=big32_8_4;
+ SET(GRAS_ARCH_32_BITS 1)
+ SET(GRAS_THISARCH 7)
+ endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/4:")
+ if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
+ #gras_arch=8; gras_size=32; gras_arch_name=big32_4;
+ SET(GRAS_ARCH_32_BITS 1)
+ SET(GRAS_THISARCH 8)
+ endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
+ if(val_big MATCHES "B_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
+ #gras_arch=9; gras_size=32; gras_arch_name=big32_2;
+ SET(GRAS_ARCH_32_BITS 1)
+ SET(GRAS_THISARCH 9)
+ endif(val_big MATCHES "B_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
+ if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
+ #gras_arch=10; gras_size=64; gras_arch_name=big64;
+ SET(GRAS_ARCH_32_BITS 0)
+ SET(GRAS_THISARCH 10)
+ endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
+ if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/4:")
+ #gras_arch=11; gras_size=64; gras_arch_name=big64_8_4;
+ SET(GRAS_ARCH_32_BITS 0)
+ SET(GRAS_THISARCH 11)
+ endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/4:")
+
+ if(GRAS_THISARCH MATCHES "none")
message(STATUS "architecture: ${val_big}")
- message(FATAL_ERROR "GRAS_THISARCH is empty: '${GRAS_THISARCH}'")
-endif(GRAS_THISARCH MATCHES "none")
-
-# Check architecture signature end
-try_run(RUN_GRAS_VAR COMPILE_GRAS_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_GRAS_CHECK_STRUCT_COMPACTION.c
- RUN_OUTPUT_VARIABLE var2
- )
-separate_arguments(var2)
-foreach(var_tmp ${var2})
- set(${var_tmp} 1)
-endforeach(var_tmp ${var2})
-
-# Check for [SIZEOF_MAX]
-try_run(RUN_SM_VAR COMPILE_SM_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_max_size.c
- RUN_OUTPUT_VARIABLE var3
- )
-message(STATUS "SIZEOF_MAX ${var3}")
-SET(SIZEOF_MAX ${var3})
+ message(FATAL_ERROR "GRAS_THISARCH is empty: '${GRAS_THISARCH}'")
+ endif(GRAS_THISARCH MATCHES "none")
+
+ # Check architecture signature end
+ try_run(RUN_GRAS_VAR COMPILE_GRAS_VAR
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_GRAS_CHECK_STRUCT_COMPACTION.c
+ RUN_OUTPUT_VARIABLE var2
+ )
+ separate_arguments(var2)
+ foreach(var_tmp ${var2})
+ set(${var_tmp} 1)
+ endforeach(var_tmp ${var2})
+
+ # Check for [SIZEOF_MAX]
+ try_run(RUN_SM_VAR COMPILE_SM_VAR
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_max_size.c
+ RUN_OUTPUT_VARIABLE var3
+ )
+ message(STATUS "SIZEOF_MAX ${var3}")
+ SET(SIZEOF_MAX ${var3})
ENDIF(NOT CMAKE_CROSSCOMPILING)
#--------------------------------------------------------------------------------------------------
set(makecontext_CPPFLAGS_2 "")
if(HAVE_MAKECONTEXT OR WIN32)
- set(makecontext_CPPFLAGS "-DTEST_makecontext")
- if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
- set(makecontext_CPPFLAGS_2 "-D_XOPEN_SOURCE")
- endif(CMAKE_SYSTEM_NAME MATCHES "Darwin")
-
- if(WIN32)
- if(ARCH_32_BITS)
- set(makecontext_CPPFLAGS "-DTEST_makecontext -D_I_X86_")
- else(ARCH_32_BITS)
- set(makecontext_CPPFLAGS "-DTEST_makecontext -D_AMD64_")
- endif(ARCH_32_BITS)
- set(makecontext_CPPFLAGS_2 "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/include/xbt -I${CMAKE_HOME_DIRECTORY}/src/xbt")
- endif(WIN32)
-
- file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
-
- try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_stacksetup.c
- COMPILE_DEFINITIONS "${makecontext_CPPFLAGS} ${makecontext_CPPFLAGS_2}"
- )
-
- if(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
- file(READ ${CMAKE_BINARY_DIR}/conftestval MAKECONTEXT_ADDR_SIZE)
- string(REPLACE "\n" "" MAKECONTEXT_ADDR_SIZE "${MAKECONTEXT_ADDR_SIZE}")
- string(REGEX MATCH ;^.*,;MAKECONTEXT_ADDR "${MAKECONTEXT_ADDR_SIZE}")
- string(REGEX MATCH ;,.*$; MAKECONTEXT_SIZE "${MAKECONTEXT_ADDR_SIZE}")
- string(REPLACE "," "" makecontext_addr "${MAKECONTEXT_ADDR}")
- string(REPLACE "," "" makecontext_size "${MAKECONTEXT_SIZE}")
- set(pth_skaddr_makecontext "#define pth_skaddr_makecontext(skaddr,sksize) (${makecontext_addr})")
- set(pth_sksize_makecontext "#define pth_sksize_makecontext(skaddr,sksize) (${makecontext_size})")
- message(STATUS "${pth_skaddr_makecontext}")
- message(STATUS "${pth_sksize_makecontext}")
- else(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
-# message(FATAL_ERROR "makecontext is not compilable")
- endif(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
+ set(makecontext_CPPFLAGS "-DTEST_makecontext")
+ if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
+ set(makecontext_CPPFLAGS_2 "-D_XOPEN_SOURCE")
+ endif(CMAKE_SYSTEM_NAME MATCHES "Darwin")
+
+ if(WIN32)
+ if(ARCH_32_BITS)
+ set(makecontext_CPPFLAGS "-DTEST_makecontext -D_I_X86_")
+ else(ARCH_32_BITS)
+ set(makecontext_CPPFLAGS "-DTEST_makecontext -D_AMD64_")
+ endif(ARCH_32_BITS)
+ set(makecontext_CPPFLAGS_2 "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/include/xbt -I${CMAKE_HOME_DIRECTORY}/src/xbt")
+ endif(WIN32)
+
+ file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
+
+ try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_stacksetup.c
+ COMPILE_DEFINITIONS "${makecontext_CPPFLAGS} ${makecontext_CPPFLAGS_2}"
+ )
+
+ if(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
+ file(READ ${CMAKE_BINARY_DIR}/conftestval MAKECONTEXT_ADDR_SIZE)
+ string(REPLACE "\n" "" MAKECONTEXT_ADDR_SIZE "${MAKECONTEXT_ADDR_SIZE}")
+ string(REGEX MATCH ;^.*,;MAKECONTEXT_ADDR "${MAKECONTEXT_ADDR_SIZE}")
+ string(REGEX MATCH ;,.*$; MAKECONTEXT_SIZE "${MAKECONTEXT_ADDR_SIZE}")
+ string(REPLACE "," "" makecontext_addr "${MAKECONTEXT_ADDR}")
+ string(REPLACE "," "" makecontext_size "${MAKECONTEXT_SIZE}")
+ set(pth_skaddr_makecontext "#define pth_skaddr_makecontext(skaddr,sksize) (${makecontext_addr})")
+ set(pth_sksize_makecontext "#define pth_sksize_makecontext(skaddr,sksize) (${makecontext_size})")
+ message(STATUS "${pth_skaddr_makecontext}")
+ message(STATUS "${pth_sksize_makecontext}")
+ else(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
+ # message(FATAL_ERROR "makecontext is not compilable")
+ endif(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
endif(HAVE_MAKECONTEXT OR WIN32)
#--------------------------------------------------------------------------------------------------
### check for stackgrowth
if (NOT CMAKE_CROSSCOMPILING)
- try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_stackgrowth.c
- )
-file(READ "${CMAKE_BINARY_DIR}/conftestval" stack)
-if(stack MATCHES "down")
- set(PTH_STACKGROWTH "-1")
-endif(stack MATCHES "down")
-if(stack MATCHES "up")
- set(PTH_STACKGROWTH "1")
-endif(stack MATCHES "up")
+ try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_stackgrowth.c
+ )
+ file(READ "${CMAKE_BINARY_DIR}/conftestval" stack)
+ if(stack MATCHES "down")
+ set(PTH_STACKGROWTH "-1")
+ endif(stack MATCHES "down")
+ if(stack MATCHES "up")
+ set(PTH_STACKGROWTH "1")
+ endif(stack MATCHES "up")
endif(NOT CMAKE_CROSSCOMPILING)
###############
#AC_PROG_MAKE_SET
-
#AC_PRINTF_NULL
try_run(RUN_PRINTF_NULL_VAR COMPILE_PRINTF_NULL_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_printf_null.c
- )
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_printf_null.c
+ )
if(RUN_PRINTF_NULL_VAR MATCHES "FAILED_TO_RUN")
-SET(PRINTF_NULL_WORKING "0")
+ SET(PRINTF_NULL_WORKING "0")
else(RUN_PRINTF_NULL_VAR MATCHES "FAILED_TO_RUN")
-SET(PRINTF_NULL_WORKING "1")
+ SET(PRINTF_NULL_WORKING "1")
endif(RUN_PRINTF_NULL_VAR MATCHES "FAILED_TO_RUN")
#AC_CHECK_VA_COPY
set(diff_va "va_copy((d),(s))"
-"VA_COPY((d),(s))"
-"__va_copy((d),(s))"
-"__builtin_va_copy((d),(s))"
-"do { (d) = (s)\; } while (0)"
-"do { *(d) = *(s)\; } while (0)"
-"memcpy((void *)&(d), (void *)&(s), sizeof(s))"
-"memcpy((void *)(d), (void *)(s), sizeof(*(s)))"
-)
+ "VA_COPY((d),(s))"
+ "__va_copy((d),(s))"
+ "__builtin_va_copy((d),(s))"
+ "do { (d) = (s)\; } while (0)"
+ "do { *(d) = *(s)\; } while (0)"
+ "memcpy((void *)&(d), (void *)&(s), sizeof(s))"
+ "memcpy((void *)(d), (void *)(s), sizeof(*(s)))"
+ )
foreach(fct ${diff_va})
- write_file("${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_va_copy.c" "#include <stdlib.h>
+ write_file("${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_va_copy.c" "#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#define DO_VA_COPY(d,s) ${fct}
test(\"test\", 1, 2, 3, 4, 5, 6, 7, 8, 9);
exit(0);
}"
- )
- try_compile(COMPILE_VA_NULL_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_va_copy.c
- )
- if(COMPILE_VA_NULL_VAR)
- string(REGEX REPLACE "\;" "" fctbis ${fct})
- if(${fctbis} STREQUAL "va_copy((d),(s))")
- set(HAVE_VA_COPY 1)
- set(ac_cv_va_copy "C99")
- set(__VA_COPY_USE_C99 "va_copy((d),(s))")
- endif(${fctbis} STREQUAL "va_copy((d),(s))")
-
- if(${fctbis} STREQUAL "VA_COPY((d),(s))")
- set(ac_cv_va_copy "GCM")
- set(__VA_COPY_USE_GCM "VA_COPY((d),(s))")
- endif(${fctbis} STREQUAL "VA_COPY((d),(s))")
-
- if(${fctbis} STREQUAL "__va_copy((d),(s))")
- set(ac_cv_va_copy "GCH")
- set(__VA_COPY_USE_GCH "__va_copy((d),(s))")
- endif(${fctbis} STREQUAL "__va_copy((d),(s))")
-
- if(${fctbis} STREQUAL "__builtin_va_copy((d),(s))")
- set(ac_cv_va_copy "GCB")
- set(__VA_COPY_USE_GCB "__builtin_va_copy((d),(s))")
- endif(${fctbis} STREQUAL "__builtin_va_copy((d),(s))")
-
- if(${fctbis} STREQUAL "do { (d) = (s) } while (0)")
- set(ac_cv_va_copy "ASS")
- set(__VA_COPY_USE_ASS "do { (d) = (s); } while (0)")
- endif(${fctbis} STREQUAL "do { (d) = (s) } while (0)")
-
- if(${fctbis} STREQUAL "do { *(d) = *(s) } while (0)")
- set(ac_cv_va_copy "ASP")
- set(__VA_COPY_USE_ASP "do { *(d) = *(s); } while (0)")
- endif(${fctbis} STREQUAL "do { *(d) = *(s) } while (0)")
-
- if(${fctbis} STREQUAL "memcpy((void *)&(d), (void *)&(s), sizeof(s))")
- set(ac_cv_va_copy "CPS")
- set(__VA_COPY_USE_CPS "memcpy((void *)&(d), (void *)&(s), sizeof(s))")
- endif(${fctbis} STREQUAL "memcpy((void *)&(d), (void *)&(s), sizeof(s))")
-
- if(${fctbis} STREQUAL "memcpy((void *)(d), (void *)(s), sizeof(*(s)))")
- set(ac_cv_va_copy "CPP")
- set(__VA_COPY_USE_CPP "memcpy((void *)(d), (void *)(s), sizeof(*(s)))")
- endif(${fctbis} STREQUAL "memcpy((void *)(d), (void *)(s), sizeof(*(s)))")
-
- if(NOT STATUS_OK)
- set(__VA_COPY_USE "__VA_COPY_USE_${ac_cv_va_copy}(d, s)")
- endif(NOT STATUS_OK)
- set(STATUS_OK "1")
-
- endif(COMPILE_VA_NULL_VAR)
-
+ )
+ try_compile(COMPILE_VA_NULL_VAR
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_va_copy.c
+ )
+ if(COMPILE_VA_NULL_VAR)
+ string(REGEX REPLACE "\;" "" fctbis ${fct})
+ if(${fctbis} STREQUAL "va_copy((d),(s))")
+ set(HAVE_VA_COPY 1)
+ set(ac_cv_va_copy "C99")
+ set(__VA_COPY_USE_C99 "va_copy((d),(s))")
+ endif(${fctbis} STREQUAL "va_copy((d),(s))")
+
+ if(${fctbis} STREQUAL "VA_COPY((d),(s))")
+ set(ac_cv_va_copy "GCM")
+ set(__VA_COPY_USE_GCM "VA_COPY((d),(s))")
+ endif(${fctbis} STREQUAL "VA_COPY((d),(s))")
+
+ if(${fctbis} STREQUAL "__va_copy((d),(s))")
+ set(ac_cv_va_copy "GCH")
+ set(__VA_COPY_USE_GCH "__va_copy((d),(s))")
+ endif(${fctbis} STREQUAL "__va_copy((d),(s))")
+
+ if(${fctbis} STREQUAL "__builtin_va_copy((d),(s))")
+ set(ac_cv_va_copy "GCB")
+ set(__VA_COPY_USE_GCB "__builtin_va_copy((d),(s))")
+ endif(${fctbis} STREQUAL "__builtin_va_copy((d),(s))")
+
+ if(${fctbis} STREQUAL "do { (d) = (s) } while (0)")
+ set(ac_cv_va_copy "ASS")
+ set(__VA_COPY_USE_ASS "do { (d) = (s); } while (0)")
+ endif(${fctbis} STREQUAL "do { (d) = (s) } while (0)")
+
+ if(${fctbis} STREQUAL "do { *(d) = *(s) } while (0)")
+ set(ac_cv_va_copy "ASP")
+ set(__VA_COPY_USE_ASP "do { *(d) = *(s); } while (0)")
+ endif(${fctbis} STREQUAL "do { *(d) = *(s) } while (0)")
+
+ if(${fctbis} STREQUAL "memcpy((void *)&(d), (void *)&(s), sizeof(s))")
+ set(ac_cv_va_copy "CPS")
+ set(__VA_COPY_USE_CPS "memcpy((void *)&(d), (void *)&(s), sizeof(s))")
+ endif(${fctbis} STREQUAL "memcpy((void *)&(d), (void *)&(s), sizeof(s))")
+
+ if(${fctbis} STREQUAL "memcpy((void *)(d), (void *)(s), sizeof(*(s)))")
+ set(ac_cv_va_copy "CPP")
+ set(__VA_COPY_USE_CPP "memcpy((void *)(d), (void *)(s), sizeof(*(s)))")
+ endif(${fctbis} STREQUAL "memcpy((void *)(d), (void *)(s), sizeof(*(s)))")
+
+ if(NOT STATUS_OK)
+ set(__VA_COPY_USE "__VA_COPY_USE_${ac_cv_va_copy}(d, s)")
+ endif(NOT STATUS_OK)
+ set(STATUS_OK "1")
+
+ endif(COMPILE_VA_NULL_VAR)
+
endforeach(fct ${diff_va})
#--------------------------------------------------------------------------------------------------
### check for getline
try_compile(COMPILE_RESULT_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_getline.c
- )
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_getline.c
+ )
if(NOT COMPILE_RESULT_VAR)
-SET(need_getline "#define SIMGRID_NEED_GETLINE 1")
-SET(SIMGRID_NEED_GETLINE 1)
+ SET(need_getline "#define SIMGRID_NEED_GETLINE 1")
+ SET(SIMGRID_NEED_GETLINE 1)
else(NOT COMPILE_RESULT_VAR)
-SET(need_getline "")
-SET(SIMGRID_NEED_GETLINE 0)
+ SET(need_getline "")
+ SET(SIMGRID_NEED_GETLINE 0)
endif(NOT COMPILE_RESULT_VAR)
### check for a working snprintf
if(HAVE_SNPRINTF AND HAVE_VSNPRINTF OR WIN32)
- if(WIN32)
- #set(HAVE_SNPRINTF 1)
- #set(HAVE_VSNPRINTF 1)
- endif(WIN32)
-
- if(CMAKE_CROSSCOMPILING)
- set(RUN_SNPRINTF_FUNC "cross")
- #set(PREFER_PORTABLE_SNPRINTF 1)
- else(CMAKE_CROSSCOMPILING)
- try_run(RUN_SNPRINTF_FUNC_VAR COMPILE_SNPRINTF_FUNC_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_snprintf.c
- )
- endif(CMAKE_CROSSCOMPILING)
-
- if(CMAKE_CROSSCOMPILING)
- set(RUN_VSNPRINTF_FUNC "cross")
- set(PREFER_PORTABLE_VSNPRINTF 1)
- else(CMAKE_CROSSCOMPILING)
- try_run(RUN_VSNPRINTF_FUNC_VAR COMPILE_VSNPRINTF_FUNC_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_vsnprintf.c
- )
- endif(CMAKE_CROSSCOMPILING)
-
- set(PREFER_PORTABLE_SNPRINTF 0)
- if(RUN_VSNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
- set(PREFER_PORTABLE_SNPRINTF 1)
- endif(RUN_VSNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
- if(RUN_SNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
- set(PREFER_PORTABLE_SNPRINTF 1)
- endif(RUN_SNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
+ if(WIN32)
+ #set(HAVE_SNPRINTF 1)
+ #set(HAVE_VSNPRINTF 1)
+ endif(WIN32)
+
+ if(CMAKE_CROSSCOMPILING)
+ set(RUN_SNPRINTF_FUNC "cross")
+ #set(PREFER_PORTABLE_SNPRINTF 1)
+ else(CMAKE_CROSSCOMPILING)
+ try_run(RUN_SNPRINTF_FUNC_VAR COMPILE_SNPRINTF_FUNC_VAR
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_snprintf.c
+ )
+ endif(CMAKE_CROSSCOMPILING)
+
+ if(CMAKE_CROSSCOMPILING)
+ set(RUN_VSNPRINTF_FUNC "cross")
+ set(PREFER_PORTABLE_VSNPRINTF 1)
+ else(CMAKE_CROSSCOMPILING)
+ try_run(RUN_VSNPRINTF_FUNC_VAR COMPILE_VSNPRINTF_FUNC_VAR
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_vsnprintf.c
+ )
+ endif(CMAKE_CROSSCOMPILING)
+
+ set(PREFER_PORTABLE_SNPRINTF 0)
+ if(RUN_VSNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
+ set(PREFER_PORTABLE_SNPRINTF 1)
+ endif(RUN_VSNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
+ if(RUN_SNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
+ set(PREFER_PORTABLE_SNPRINTF 1)
+ endif(RUN_SNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
endif(HAVE_SNPRINTF AND HAVE_VSNPRINTF OR WIN32)
### check for asprintf function familly
if(HAVE_ASPRINTF)
- SET(simgrid_need_asprintf "")
- SET(NEED_ASPRINTF 0)
+ SET(simgrid_need_asprintf "")
+ SET(NEED_ASPRINTF 0)
else(HAVE_ASPRINTF)
- SET(simgrid_need_asprintf "#define SIMGRID_NEED_ASPRINTF 1")
- SET(NEED_ASPRINTF 1)
+ SET(simgrid_need_asprintf "#define SIMGRID_NEED_ASPRINTF 1")
+ SET(NEED_ASPRINTF 1)
endif(HAVE_ASPRINTF)
if(HAVE_VASPRINTF)
- SET(simgrid_need_vasprintf "")
- SET(NEED_VASPRINTF 0)
+ SET(simgrid_need_vasprintf "")
+ SET(NEED_VASPRINTF 0)
else(HAVE_VASPRINTF)
- SET(simgrid_need_vasprintf "#define SIMGRID_NEED_VASPRINTF 1")
- SET(NEED_VASPRINTF 1)
+ SET(simgrid_need_vasprintf "#define SIMGRID_NEED_VASPRINTF 1")
+ SET(NEED_VASPRINTF 1)
endif(HAVE_VASPRINTF)
### check for addr2line
find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS )
if(ADDR2LINE)
-set(ADDR2LINE "${ADDR2LINE}/addr2line")
+ set(ADDR2LINE "${ADDR2LINE}/addr2line")
endif(ADDR2LINE)
-
-
### Check if OSX can compile with ucontext (with gcc 4.[1-5] it is broken)
if(APPLE)
- if(APPLE_NEED_GCC_VERSION GREATER COMPILER_C_VERSION_MAJOR_MINOR)
- message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
- set(HAVE_UCONTEXT_H 0)
- endif(APPLE_NEED_GCC_VERSION GREATER COMPILER_C_VERSION_MAJOR_MINOR)
+ if(APPLE_NEED_GCC_VERSION GREATER COMPILER_C_VERSION_MAJOR_MINOR)
+ message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
+ set(HAVE_UCONTEXT_H 0)
+ endif(APPLE_NEED_GCC_VERSION GREATER COMPILER_C_VERSION_MAJOR_MINOR)
endif(APPLE)
### File to create
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/bin/smpirun @ONLY)
if(NOT WIN32)
-exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicc" OUTPUT_VARIABLE OKITOKI)
-exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpif2c" OUTPUT_VARIABLE OKITOKI)
-exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpiff" OUTPUT_VARIABLE OKITOKI)
-exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpirun" OUTPUT_VARIABLE OKITOKI)
+ exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicc" OUTPUT_VARIABLE OKITOKI)
+ exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpif2c" OUTPUT_VARIABLE OKITOKI)
+ exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpiff" OUTPUT_VARIABLE OKITOKI)
+ exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpirun" OUTPUT_VARIABLE OKITOKI)
endif(NOT WIN32)
set(generated_headers_to_install
- ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/smpif.h
- ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
-)
+ ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/smpif.h
+ ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
+ )
set(generated_headers
- ${CMAKE_CURRENT_BINARY_DIR}/src/context_sysv_config.h
- ${CMAKE_CURRENT_BINARY_DIR}/src/gras_config.h
-)
+ ${CMAKE_CURRENT_BINARY_DIR}/src/context_sysv_config.h
+ ${CMAKE_CURRENT_BINARY_DIR}/src/gras_config.h
+ )
set(generated_files_to_clean
-${generated_headers}
-${generated_headers_to_install}
-${CMAKE_BINARY_DIR}/bin/smpicc
-${CMAKE_BINARY_DIR}/bin/smpif2c
-${CMAKE_BINARY_DIR}/bin/smpiff
-${CMAKE_BINARY_DIR}/bin/smpirun
-${CMAKE_BINARY_DIR}/bin/colorize
-${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
-${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
-${CMAKE_BINARY_DIR}/src/supernovae_sg.c
-${CMAKE_BINARY_DIR}/src/supernovae_gras.c
-${CMAKE_BINARY_DIR}/src/supernovae_smpi.c
-)
+ ${generated_headers}
+ ${generated_headers_to_install}
+ ${CMAKE_BINARY_DIR}/bin/smpicc
+ ${CMAKE_BINARY_DIR}/bin/smpif2c
+ ${CMAKE_BINARY_DIR}/bin/smpiff
+ ${CMAKE_BINARY_DIR}/bin/smpirun
+ ${CMAKE_BINARY_DIR}/bin/colorize
+ ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
+ ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
+ ${CMAKE_BINARY_DIR}/src/supernovae_sg.c
+ ${CMAKE_BINARY_DIR}/src/supernovae_gras.c
+ ${CMAKE_BINARY_DIR}/src/supernovae_smpi.c
+ )
if("${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
else("${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/hostfile ${CMAKE_BINARY_DIR}/examples/smpi/hostfile COPYONLY)
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/small_platform.xml ${CMAKE_BINARY_DIR}/examples/msg/small_platform.xml COPYONLY)
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/small_platform_with_routers.xml ${CMAKE_BINARY_DIR}/examples/msg/small_platform_with_routers.xml COPYONLY)
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/tracing/platform.xml ${CMAKE_BINARY_DIR}/examples/msg/tracing/platform.xml COPYONLY)
-
- set(generated_files_to_clean
- ${generated_files_to_clean}
- ${CMAKE_BINARY_DIR}/examples/smpi/hostfile
- ${CMAKE_BINARY_DIR}/examples/msg/small_platform.xml
- ${CMAKE_BINARY_DIR}/examples/msg/small_platform_with_routers.xml
- ${CMAKE_BINARY_DIR}/examples/msg/tracing/platform.xml
- )
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/hostfile ${CMAKE_BINARY_DIR}/examples/smpi/hostfile COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/small_platform.xml ${CMAKE_BINARY_DIR}/examples/msg/small_platform.xml COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/small_platform_with_routers.xml ${CMAKE_BINARY_DIR}/examples/msg/small_platform_with_routers.xml COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/tracing/platform.xml ${CMAKE_BINARY_DIR}/examples/msg/tracing/platform.xml COPYONLY)
+
+ set(generated_files_to_clean
+ ${generated_files_to_clean}
+ ${CMAKE_BINARY_DIR}/examples/smpi/hostfile
+ ${CMAKE_BINARY_DIR}/examples/msg/small_platform.xml
+ ${CMAKE_BINARY_DIR}/examples/msg/small_platform_with_routers.xml
+ ${CMAKE_BINARY_DIR}/examples/msg/tracing/platform.xml
+ )
endif("${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
-"${generated_files_to_clean}")
-
+ "${generated_files_to_clean}")
IF(${ARCH_32_BITS})
set(WIN_ARCH "32")
ELSE(${ARCH_32_BITS})
- set(WIN_ARCH "64")
+ set(WIN_ARCH "64")
ENDIF(${ARCH_32_BITS})
configure_file("${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/src/simgrid.nsi.in" "${CMAKE_BINARY_DIR}/simgrid.nsi" @ONLY IMMEDIATE)
