#define SURF_ROUTING_CLUSTER_FAT_TREE_HPP_
+/** \file surf_routing_cluster_fat_tree.cpp
+ * The class AsClusterFatTree describes PGFT, as introduced by Eitan Zahavi
+ * in "D-Mod-K Routing Providing Non-Blocking Traffic for Shift Permutations
+ * on Real Life Fat Trees" (2010). RLFT are PGFT with some restrictions to
+ * address real world constraints, which are not currently enforced.
+ */
-class FatTreeLink;
class FatTreeNode;
+class FatTreeLink;
+
+/** \brief A node in a fat tree.
+ * A FatTreeNode can either be a switch or a processing node. Switches are
+ * identified by a negative ID. This class is closely related to fat
+ */
+class FatTreeNode {
+public:
+ /** Unique ID which identifies every node. */
+ int id;
+ /* Level into the tree, with 0 being the leafs.
+ */
+ unsigned int level;
+ /* \brief Position into the level, starting from 0.
+ */
+ unsigned int position;
+ /** In order to link nodes between them, each one must be assigned a label,
+ * consisting of l integers, l being the levels number of the tree. Each label
+ * is unique in the level, and the way it is generated allows the construction
+ * of a fat tree which fits the desired topology.
+ */
+ std::vector<unsigned int> label;
+
+ /** Links to the lower level, where the position in the vector corresponds to
+ * a port number.
+ */
+ std::vector<FatTreeLink*> children;
+ /** Links to the upper level, where the position in the vector corresponds to
+ * a port number.
+ */
+ std::vector<FatTreeLink*> parents;
+
+ /** Virtual link standing for the node global capacity.
+ */
+ NetworkLink* limiterLink;
+ /** If present, communications from this node to this node will pass through it
+ * instead of passing by an upper level switch.
+ */
+ NetworkLink* loopback;
+ FatTreeNode(sg_platf_cluster_cbarg_t cluster, int id, int level,
+ int position);
+};
+
+
+
+/** \brief Link in a fat tree.
+ *
+ * Represents a single, duplex link in a fat tree. This is necessary to have a tree.
+ * It is equivalent to a physical link.
+ */
+class FatTreeLink {
+public:
+ FatTreeLink(sg_platf_cluster_cbarg_t cluster, FatTreeNode *source,
+ FatTreeNode *destination);
+ /** Link going up in the tree
+ */
+ NetworkLink *upLink;
+ /** Link going down in the tree
+ */
+ NetworkLink *downLink;
+ /** Upper end of the link
+ */
+ FatTreeNode *upNode;
+ /** Lower end of the link
+ */
+ FatTreeNode *downNode;
+};
+
+/** \brief Fat tree representation and routing.
+ *
+ * Generate fat trees according to the topology asked for. Almost everything
+ * is based on the work of Eitan Zahavi in "D-Mod-K Routing Providing
+ * Non-Blocking Traffic for Shift Permutations on Real Life Fat Trees" (2010).
+ *
+ * The exact topology is described in the mandatory topo_parameters
+ * field, and follow the "h ; m_h, ..., m_1 ; w_h, ..., w_1 ; p_h, ..., p_1" format.
+ * h stands for the switches levels number, i.e. the fat tree is of height h,
+ * without the processing nodes. m_i stands for the number of lower level nodes
+ * connected to a node in level i. w_i stands for the number of upper levels
+ * nodes connected to a node in level i-1. p_i stands for the number of
+ * parallel links connecting two nodes between level i and i - 1. Level h is
+ * the topmost switch level, level 1 is the lowest switch level, and level 0
+ * represents the processing nodes. The number of provided nodes must be exactly
+ * the number of processing nodes required to fit the topology, which is the
+ * product of the m_i's.
+ *
+ * Routing is made using a destination-mod-k scheme.
+ */
class AsClusterFatTree : public AsCluster {
public:
AsClusterFatTree();
- virtual void getRouteAndLatency(RoutingEdgePtr src, RoutingEdgePtr dst, sg_platf_route_cbarg_t into, double *latency);
+ ~AsClusterFatTree();
+ virtual void getRouteAndLatency(RoutingEdgePtr src, RoutingEdgePtr dst,
+ sg_platf_route_cbarg_t into,
+ double *latency);
+
+ /** \brief Generate the fat tree
+ *
+ * Once all processing nodes have been added, this will make sure the fat
+ * tree is generated by calling generateLabels(), generateSwitches() and
+ * then connection all nodes between them, using their label.
+ */
virtual void create_links();
+ /** \brief Read the parameters in topo_parameters field.
+ *
+ * It will also store the cluster for future use.
+ */
void parse_specific_arguments(sg_platf_cluster_cbarg_t cluster);
+ /** \brief Add a processing node.
+ */
+ void addProcessingNode(int id);
+ void generateDotFile(const string& filename = "fatTree.dot") const;
-protected:
+private:
+
//description of a PGFT (TODO : better doc)
unsigned int levels;
- std::vector<int> lowerLevelNodesNumber;
- std::vector<int> upperLevelNodesNumber;
- std::vector<int> lowerLevelPortsNumber;
+ std::vector<unsigned int> lowerLevelNodesNumber; // number of children by node
+ std::vector<unsigned int> upperLevelNodesNumber; // number of parents by node
+ std::vector<unsigned int> lowerLevelPortsNumber; // ports between each level l and l-1
- std::vector<FatTreeNode> nodes;
-};
+ std::map<int, FatTreeNode*> computeNodes;
+ std::vector<FatTreeNode*> nodes;
+ std::vector<FatTreeLink*> links;
+ std::vector<unsigned int> nodesByLevel;
-class FatTreeLink {
-public:
-};
-class FatTreeNode {
- int id;
- std::string name;
+ sg_platf_cluster_cbarg_t cluster;
+
+ void addLink(FatTreeNode *parent, unsigned int parentPort,
+ FatTreeNode *child, unsigned int childPort);
+ int getLevelPosition(const unsigned int level);
+ void generateLabels();
+ void generateSwitches();
+ int connectNodeToParents(FatTreeNode *node);
+ bool areRelated(FatTreeNode *parent, FatTreeNode *child);
+ bool isInSubTree(FatTreeNode *root, FatTreeNode *node);
};
-
#endif