# members were ordinary class members. Constructors, destructors and assignment
# operators of the base classes will not be shown.
-INLINE_INHERITED_MEMB = YES
+INLINE_INHERITED_MEMB = NO
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
# path before files name in the file list and in the header files. If set
# If left blank the directory from which doxygen is run is used as the
# path to strip.
-STRIP_FROM_PATH = @srcdir@
+STRIP_FROM_PATH = @CMAKE_HOME_DIRECTORY@ \
+ @CMAKE_BINARY_DIR@
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
# the path mentioned in the documentation of a class, which tells
# comments will behave just like regular Qt-style comments
# (thus requiring an explicit @brief command for a brief description.)
-JAVADOC_AUTOBRIEF = NO
+JAVADOC_AUTOBRIEF = YES
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
# interpret the first line (until the first dot) of a Qt-style
# comment as the brief description. If set to NO, the comments
# will behave just like regular Qt-style comments (thus requiring
-# an explicit \brief command for a brief description.)
+# an explicit @brief command for a brief description.)
QT_AUTOBRIEF = NO
# For instance, some of the names that are used will be different. The list
# of all members will be omitted, etc.
-OPTIMIZE_OUTPUT_FOR_C = YES
+OPTIMIZE_OUTPUT_FOR_C = NO
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
# sources only. Doxygen will then generate output that is more tailored for
TYPEDEF_HIDES_STRUCT = NO
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
-
-SYMBOL_CACHE_SIZE = 0
-
# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
# their name and scope. Since this can be an expensive process and often the
# Private class members and static file members will be hidden unless
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-EXTRACT_ALL = NO
+EXTRACT_ALL = YES
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
# will be included in the documentation.
# various overviews, but no documentation section is generated.
# This option has no effect if EXTRACT_ALL is enabled.
-HIDE_UNDOC_MEMBERS = YES
+HIDE_UNDOC_MEMBERS = NO
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy.
# If set to NO (the default) these declarations will be included in the
# documentation.
-HIDE_FRIEND_COMPOUNDS = NO
+HIDE_FRIEND_COMPOUNDS = YES
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
# documentation blocks found inside the body of a function.
# You can optionally specify a file name after the option, if omitted
# DoxygenLayout.xml will be used as the name of the layout file.
-LAYOUT_FILE = Layout.xml
+LAYOUT_FILE = @CMAKE_HOME_DIRECTORY@/doc/Layout.xml
# The CITE_BIB_FILES tag can be used to specify one or more bib files
# containing the references data. This must be a list of .bib files. The
# wrong or incomplete parameter documentation, but not about the absence of
# documentation.
-WARN_NO_PARAMDOC = YES
+WARN_NO_PARAMDOC = NO
# The WARN_FORMAT tag determines the format of the warning messages that
# doxygen can produce. The string should contain the $file, $line, and $text
# directories like "/usr/src/myproject". Separate the files or directories
# with spaces.
-INPUT = doxygen/index.doc \
- doxygen/getting_started.doc \
- doxygen/introduction.doc \
- doxygen/install.doc \
- doxygen/use.doc \
- doxygen/platform.doc \
- doxygen/deployment.doc \
- doxygen/options.doc \
- doxygen/help.doc \
- doxygen/advanced.doc \
- doxygen/pls.doc \
- doxygen/bindings.doc \
- doxygen/internals.doc \
- doxygen/inside_doxygen.doc \
- doxygen/inside_extending.doc \
- doxygen/inside_cmake.doc \
- doxygen/inside_autotests.doc \
- doxygen/inside_release.doc \
- doxygen/contributing.doc \
- doxygen/tracing.doc \
- doxygen/FAQ.doc \
- doxygen/modules.doc \
- doxygen/module-xbt.doc \
- doxygen/module-msg.doc \
- doxygen/module-sd.doc \
- doxygen/module-surf.doc \
- doxygen/module-simix.doc \
- doxygen/module-smpi.doc \
- doxygen/module-trace.doc \
- index-API.doc \
- @top_srcdir@/doc/doxygen/logcategories.doc \
- @top_srcdir@/src/instr/ \
- @top_srcdir@/include/ \
- @top_srcdir@/include/msg \
- @top_srcdir@/include/xbt \
- @top_srcdir@/include/simdag \
- @top_srcdir@/include/simgrid \
- @top_srcdir@/src/include/surf \
- @top_srcdir@/src/xbt/ \
- @top_srcdir@/src/surf/ \
- @top_srcdir@/src/msg/ \
- @top_srcdir@/src/simdag \
- @top_srcdir@/src/simix
-
-
-###################################################
-## PLEASE DON'T MESS WITH THE ORDER OF EXAMPLES ## (unless you know what you are doing, of course)
-###################################################
-
-INPUT += @top_srcdir@/examples/msg/sendrecv/sendrecv.c \
- @top_srcdir@/examples/msg/masterslave/masterslave_forwarder.c \
- @top_srcdir@/examples/msg/migration \
- @top_srcdir@/examples/msg/suspend \
- @top_srcdir@/examples/msg/properties \
- @top_srcdir@/examples/msg/parallel_task \
- @top_srcdir@/examples/msg/priority \
- @top_srcdir@/examples/msg/icomms/peer.c \
- @top_srcdir@/examples/msg/icomms/peer2.c \
- @top_srcdir@/examples/msg/icomms/peer3.c \
- @top_srcdir@/examples/msg/tracing/simple.c \
- @top_srcdir@/examples/msg/tracing/ms.c \
- @top_srcdir@/examples/msg/tracing/categories.c \
- @top_srcdir@/examples/msg/tracing/procmig.c \
- @top_srcdir@/examples/msg/tracing/trace_platform.c \
- @top_srcdir@/examples/msg/tracing/user_variables.c \
- @top_srcdir@/examples/msg/tracing/link_user_variables.c \
- @top_srcdir@/examples/msg/tracing/link_srcdst_user_variables.c \
- @top_srcdir@/examples/msg/ns3 \
- @top_srcdir@/examples/msg/gtnets \
- @top_srcdir@/examples/msg/io \
- @top_srcdir@/examples/msg/gpu \
- @top_srcdir@/examples/msg/actions \
- @top_srcdir@/examples/msg/token_ring \
- @top_srcdir@/examples/msg/pmm \
- @top_srcdir@/examples/msg/chord
+INPUT = @CMAKE_HOME_DIRECTORY@/doc/doxygen/index.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/getting_started.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/install.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/install_yours.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/application.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/java.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/platform.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/models.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/ns3.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/platform_lua.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/scenario.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/deployment.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/options.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/outcomes.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/outcomes_logs.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/outcomes_vizu.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/outcomes_MC.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/tuto-msg/tuto-msg.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/tutorial_smpi.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/examples.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/howtos.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/uhood.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/uhood_arch.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/uhood_switch.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside_doxygen.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside_extending.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside_cmake.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside_tests.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside_release.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/community.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/FAQ.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-msg.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-sd.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-index.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-xbt.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-s4u.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-surf.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-simix.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-smpi.doc \
+ @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-trace.doc \
+ @CMAKE_BINARY_DIR@/doc/doxygen/logcategories.doc \
+ @CMAKE_HOME_DIRECTORY@/include/ \
+ @CMAKE_HOME_DIRECTORY@/src/plugins/ \
+ @CMAKE_HOME_DIRECTORY@/examples/msg/README.doc \
+ @CMAKE_HOME_DIRECTORY@/examples/s4u/README.doc
+
# This tag can be used to specify the character encoding of the source files
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
# should be searched for input files as well. Possible values are YES and NO.
# If left blank NO is used.
-RECURSIVE = NO
+RECURSIVE = YES
# The EXCLUDE tag can be used to specify files and/or directories that should be
# excluded from the INPUT source files. This way you can easily exclude a
# Note that relative paths are relative to the directory from which doxygen is
# run.
-EXCLUDE =
+EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
# from the input.
-EXCLUDE_SYMLINKS = NO
+EXCLUDE_SYMLINKS = YES
# If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# against the file with absolute path, so to exclude all test directories
# for example use the pattern */test/*
-EXCLUDE_PATTERNS =
+EXCLUDE_PATTERNS = */include/simgrid/forward.h
+EXCLUDE_PATTERNS += */include/smpi/*
+
+EXCLUDE_PATTERNS += @CMAKE_HOME_DIRECTORY@/src/surf/xml/simgrid_dtd.*
+EXCLUDE_PATTERNS += @CMAKE_HOME_DIRECTORY@/src/simdag/dax_dtd.*
+EXCLUDE_PATTERNS += @CMAKE_HOME_DIRECTORY@/src/xbt/automaton/parserPromela.*
+EXCLUDE_PATTERNS += @CMAKE_HOME_DIRECTORY@/src/bindings/java/*.cpp @CMAKE_HOME_DIRECTORY@/src/bindings/java/*.h
+EXCLUDE_PATTERNS += @CMAKE_HOME_DIRECTORY@/src/simix/popping_accessors.hpp \
+ @CMAKE_HOME_DIRECTORY@/src/simix/popping_bodies.cpp \
+ @CMAKE_HOME_DIRECTORY@/src/simix/popping_enum.h \
+ @CMAKE_HOME_DIRECTORY@/src/simix/popping_generated.cpp
+
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# (namespaces, classes, functions, etc.) that should be excluded from the
# wildcard * is used, a substring. Examples: ANamespace, AClass,
# AClass::ANamespace, ANamespace::*Test
-EXCLUDE_SYMBOLS =
+EXCLUDE_SYMBOLS = s_xbt_dict_cursor s_xbt_dictelm xbt_dynar_s
+EXCLUDE_SYMBOLS += xbt_edge xbt_graph xbt_node
+EXCLUDE_SYMBOLS += e_xbt_parmap_mode_t
+EXCLUDE_SYMBOLS += MPI_*
# The EXAMPLE_PATH tag can be used to specify one or more files or
# directories that contain example code fragments that are included (see
# the \include command).
EXAMPLE_PATH = ./ \
- @top_srcdir@/src/surf/ \
- @top_srcdir@/src/xbt/ \
- @top_srcdir@/examples \
- @top_srcdir@/testsuite
+ @CMAKE_HOME_DIRECTORY@/doc/ \
+ @CMAKE_HOME_DIRECTORY@/src/surf/ \
+ @CMAKE_HOME_DIRECTORY@/src/surf/xml/ \
+ @CMAKE_HOME_DIRECTORY@/src/xbt/ \
+ @CMAKE_HOME_DIRECTORY@/include \
+ @CMAKE_HOME_DIRECTORY@/examples \
+ @CMAKE_BINARY_DIR@/doc/example_lists \
+ @CMAKE_HOME_DIRECTORY@/doc/tuto-msg
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# directories that contain image that are included in the documentation (see
# the \image command).
-IMAGE_PATH = @top_srcdir@/doc \
- @top_srcdir@/doc/webcruft
+IMAGE_PATH = @CMAKE_HOME_DIRECTORY@/doc \
+ @CMAKE_HOME_DIRECTORY@/doc/webcruft
# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
# doxygen to hide any special comment blocks from generated source code
# fragments. Normal C and C++ comments will always remain visible.
-STRIP_CODE_COMMENTS = YES
+STRIP_CODE_COMMENTS = NO
# If the REFERENCED_BY_RELATION tag is set to YES
# then for each documented function all documented
# link to the source code.
# Otherwise they will link to the documentation.
-REFERENCES_LINK_SOURCE = YES
+REFERENCES_LINK_SOURCE = NO
# If the USE_HTAGS tag is set to YES then the references to source code
# will point to the HTML generated by the htags(1) tool instead of doxygen
# have to redo this when upgrading to a newer version of doxygen or when
# changing the value of configuration settings such as GENERATE_TREEVIEW!
-HTML_HEADER = doxygen/header.html
+HTML_HEADER = @CMAKE_HOME_DIRECTORY@/doc/doxygen/header.html
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
# each generated HTML page. If it is left blank doxygen will generate a
# standard footer.
-HTML_FOOTER = doxygen/footer.html
+HTML_FOOTER = @CMAKE_HOME_DIRECTORY@/doc/doxygen/footer.html
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
# style sheet that is used by each HTML page. It can be used to
# the style sheet file to the HTML output directory, so don't put your own
# style sheet in the HTML output directory as well, or it will be erased!
-HTML_STYLESHEET = doxygen/stylesheet.css
+HTML_STYLESHEET = @CMAKE_HOME_DIRECTORY@/doc/doxygen/stylesheet.css
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
# page will contain the date and time when the page was generated. Setting
# this to NO can help when comparing the output of multiple runs.
-HTML_TIMESTAMP = YES
+HTML_TIMESTAMP = NO
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# output. When enabled you may also need to install MathJax separately and
# configure the path to it using the MATHJAX_RELPATH option.
-USE_MATHJAX = NO
+USE_MATHJAX = YES
# When MathJax is enabled you need to specify the location relative to the
# HTML output directory using the MATHJAX_RELPATH option. The destination
# However, it is strongly recommended to install a local
# copy of MathJax from http://www.mathjax.org before deployment.
-MATHJAX_RELPATH = http://www.mathjax.org/mathjax
+MATHJAX_RELPATH = https://cdn.mathjax.org/mathjax/latest/MathJax.js?config=TeX-AMS_HTML
# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
# names that should be enabled during MathJax rendering.
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output.
-GENERATE_LATEX = YES
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-# Note that when enabling USE_PDFLATEX this option is only used for
-# generating bitmaps for formulas in the HTML output, but not in the
-# Makefile that is written to the output directory.
-
-LATEX_CMD_NAME = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX = YES
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES = pdfpages
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
-# the generated latex document. The footer should contain everything after
-# the last chapter. If it is left blank doxygen will generate a
-# standard footer. Notice: only use this tag if you know what you are doing!
-
-LATEX_FOOTER =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS = YES
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES = YES
-
-# If LATEX_SOURCE_CODE is set to YES then doxygen will include
-# source code with syntax highlighting in the LaTeX output.
-# Note that which sources are shown also depends on other settings
-# such as SOURCE_BROWSER.
-
-LATEX_SOURCE_CODE = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
-# http://en.wikipedia.org/wiki/BibTeX for more info.
-
-LATEX_BIB_STYLE = plain
+GENERATE_LATEX = NO
#---------------------------------------------------------------------------
# configuration options related to the RTF output
# generate an XML file that captures the structure of
# the code including all documentation.
-GENERATE_XML = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING = YES
+GENERATE_XML = YES
#---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output
# undefined via #undef or recursively expanded use the := operator
# instead of the = operator.
-PREDEFINED = DOXYGEN \
- DOXYGEN_SKIP_IT \
+PREDEFINED = __cplusplus \
+ DOXYGEN \
XBT_PUBLIC= \
+ XBT_EXPORT_NO_IMPORT= \
+ XBT_IMPORT_NO_EXPORT= \
+ XBT_PUBLIC_DATA=extern \
+ XBT_PUBLIC= \
XBT_INLINE= \
- HAVE_TRACING \
- MSG_USE_DEPRECATED
+ XBT_ALWAYS_INLINE= \
+ XBT_PRIVATE= \
+ XBT_ATTRIB_NORETURN= \
+ XBT_ATTRIB_UNUSED= \
+ XBT_ATTRIB_DEPRECATED_v323(m)= \
+ XBT_ATTRIB_DEPRECATED_v324(m)= \
+ XBT_ATTRIB_DEPRECATED_v325(m)=
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
# this tag can be used to specify a list of macro names that should be expanded.
# Use the PREDEFINED tag if you want to use a different macro definition that
# overrules the definition found in the source code.
-EXPAND_AS_DEFINED =
+EXPAND_AS_DEFINED = COLL_APPLY COLL_GATHERS COLL_ALLGATHERS COLL_ALLGATHERVS COLL_ALLREDUCES COLL_ALLTOALLS \
+ COLL_ALLTOALLVS COLL_BCASTS COLL_REDUCES COLL_REDUCE_SCATTERS COLL_SCATTERS COLL_BARRIERS \
+ MPI_CALL
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
# doxygen's preprocessor will remove all references to function-like macros
# this option also works with HAVE_DOT disabled, but it is recommended to
# install and use dot, since it yields more powerful graphs.
-CLASS_DIAGRAMS = YES
+CLASS_DIAGRAMS = NO
# You can define message sequence charts within doxygen comments using the \msc
# command. Doxygen will then run the mscgen tool (see
# the time of a run. So in most cases it will be better to enable caller
# graphs for selected functions only using the \callergraph command.
-CALLER_GRAPH = YES
+CALLER_GRAPH = NO
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
# will generate a graphical hierarchy of all classes instead of a textual one.
# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
# visible in IE 9+ (other browsers do not have this requirement).
-DOT_IMAGE_FORMAT = png
+DOT_IMAGE_FORMAT = svg
# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
# enable generation of interactive SVG images that allow zooming and panning.