+SimGrid (3.4-svn) unstable; urgency=high
+
+ GRAS:
+ * fix a bug on struct sizeof computation, which prevented the
+ exchange of arrays of structs in some conditions
+ - added a regression test about this in datadesc_usage
+ * Allow the exchange of 0-long dynamic vectors.
+ - for that, use -1 as indicator of dynamic size instead of 0
+ - This implied to change any size from unsigned long to long,
+ reducing a bit communication abilities, but I guess that with
+ 64bits being quite common, this is more than enough.
+ - This also induce a protocol change, thus bumping network protocol
+ version from 0 to 1 (if we have external users, we have to get
+ clean on that point too ;)
+ - added two regression tests about this in datadesc_usage
+
+ MSG:
+ * Allow to control the simulation from a trace file.
+ New functions MSG_action_register() and MSG_action_trace_run()
+ The first one allows to associate a function execution to each
+ kind of action while the second one parses a trace file and
+ triggers the corresponding actions within the system.
+ For now, only a toy example is provided in examples/msg/actions
+ * Add an exemple of process migration in examples/msg/migration
+ * Fix a bug in task exchange which broke MSG_task_get_sender()
+ Add a teshsuite regression test for that.
+ [Bug: if MSG_task_get_sender() is called after sender exit,
+ bad things happen]
+
+ SIMIX:
+ * Add SIMIX_process_set_name() to change the name of the current
+ process in the log messages.
+
+ XBT:
+ * Also include strbuff from xbt.h public header
+ * xbt_ex_display(): do not free the exception after displaying
+ This allows to do more with the given exception afterward.
+ Users should call xbt_ex_free() themselves.
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
+
+SimGrid (3.3) stable; urgency=high
+
+ OVERALL CHANGES:
+
+ * JAVA BINDINGS for MSG (you dreamt of them? We made them)
+ [Malek Cherier & Mt]
+
+ * Introduce the SIMIX module: factorize code between MSG and GRAS.
+ [Bruno Donassolo]
+
+ Until now, GRAS were using MSG as an interface to SURF. It was
+ quite difficult because both interface have several differences
+ (MSG channels vs GRAS sockets were the most notable point).
+
+ This also opens the gate to SMPI (which should occur soon) and speed
+ up simulations by to 40% (even if it were not the main goal).
+
+ **************************************
+ *DO NOT MIX 3.2 RESULTS WITH 3.3 ONES* Simix may changes simulations!
+ **************************************
+ The point is that events occuring at the exact same timestamp are
+ not scheduled in the same order with the old and new version. This
+ may be enough to completely change the execution of simulations in
+ some cases. Sorry for the inconvenience.
+
+ * Cleanup and upgrade the XML format to push further scalability
+ issues (check http://hal.inria.fr/inria-00256883/ for more info)
+
+ * Improve the testing infrastructure with tesh. Now a very large part of
+ the code is tested not only by being run but also by checking that the
+ output match an expected output [Mt].
+
+ * Move on to FleXML v1.7 for the embeeded XML parsers. This version
+ is really less memory-demanding, which should allow you to use
+ larger files in SimGrid [AL].
+
+ * Inform valgrind about our contextes, so that it becomes usable
+ with the default (and more effecient) version of SimGrid
+ [contributed by Sékou Diakite, many thanks]
+
+ GRAS:
+ * Introduce a listener thread in charge of receiving incomming
+ messages from the network. It allows to overlap communication and
+ computation but most notably, it removes some stupid deadlocks due
+ to the fact that so far, a process could not send and receive at
+ the same time. This made most non trivial communication schema
+ impossible.
+ * Convert the PIDs from long int to int to match the MSG ones (and
+ linux ones too) [Mt]
+ * New function: gras_agent_spawn() to launch a new process on
+ current host. Only working in simulation for now. [Mt]
+ * New function: gras_os_hostport() returning a constant form (ie,
+ not needing to be freed) of "gras_os_hostname():gras_os_myport()"
+
+ XBT:
+ * Make the backtrace of exceptions more human readable [Mt]
+ * New module: xbt/str [Mt]
+ a ton of string utility functions (split, join, printf to a newly
+ allocated buffer, trim, etc)
+ * New module: xbt/hash [Mt]
+ SHA1 hashing algorithm (more to come if needed)
+ * New module: xbt/synchro [Mt]
+ synchronization tools (mutex and conditions) working the same way
+ in simulation and in real life (mainly useful for GRAS, but not
+ only).
+ * New module: xbt/queue [Mt]
+ classical producer/consumer synchronization scheme
+ * xbt_dynar_new_sync() creates a synchronized dynar. All access
+ (using the classical functions will get serialized) [Mt]
+ * Make dictionary internal table dynamic. No need to specify its size
+ anymore; functions xbt_dict_new_ext() and xbt_dict_hashsize_set()
+ thus dropped. [Mt].
+ * Make sure the log channels are organized as a tree under windows
+ (because of ANSI C compatibility issue, any channel were child of
+ root directly) [Mt].
+
+ SURF:
+ * Cleaned many thing in surf and fixed a few bugs [AL].
+ * Add a nice command line configuration mechanism to compose models [AL].
+ * Add a new model for parallel tasks (ptask_L07) that is less buggy than
+ the previous one (KCCFLN05). It relies on something that looks like
+ a max-min sharing mechanism but cannot be written as such. A new solver
+ was thus designed [AL].
+ * Add a new solver to lmm. Based on Lagrange optimization and
+ gradient-based descent, it enables to efficiently maximise systems s.a
+
+ sum f_i(x_i) s.t Ax<= b with A_{i,j}>=0 and f_i a concave function.
+
+ This solver enables to propose two new network models for TCP Reno and
+ TCP Vegas based on Low's work. These models still need to be fully
+ tested though [Pedro Velho].
+
+ SIMDAG [AL]:
+ * Bug fix in SD_simulate. Now the time bound given as argument is
+ used.
+ * Use the new parallel task model (ptask_L07) as default.
+ * Use the SURF command line configuration mechanism.
+ * 0-size tasks (for synchronization) should now work.
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Sun Apr 12 05:20:36 CEST 2009
+
+SimGrid (3.2) stable; urgency=high
+
+ OVERALL CHANGES:
+ * Port to windows.
+ We still experience issues on this platform, but we believe that at
+ least MSG is usable.
+
+ GRAS API BREAKAGE (for simplification purpose, sorry):
+ * the gras_msgtype_by_name is not used anymore. Instead of
+ gras_msg_send(toserver, gras_msgtype_by_name("request"), &request);
+ you can write (and must)
+ gras_msg_send(toserver, "request", &request);
+ - If you still want to pass a gras_msgtype_t to the function (to cache
+ the type and avoid the lookup time), use the gras_msg_send_() variant.
+ - Impacted functions:
+ gras_cb_register, gras_cb_unregister, gras_msg_send, gras_msg_wait,
+ gras_msg_rpccall, gras_msg_rpc_async_call, gras_msg_wait_ext
+ * The callbacks are now expected to return 0 when everything went well
+ (just like the main() function)
+
+ GRAS new features and improvements:
+ * New module mecanism where user code can use per process globals [Mt]
+ This is similar to gras_userdata_*() functions, but for libraries. It
+ factorize some code developped over and over in the examples and AMOK.
+ It has still to be documented and used (only amok/peermanagement is
+ converted for now).
+ * Fix a vicious bug in the TCP buffering mecanism which leaded to message
+ loss when they were small enough to fit into the buffer and sent quickly
+ enough so that they can all get received in one shoot.
+ * gras_datadesc_by_name and gras_msgtype_by_name: now raise an exception
+ if not found. Use the *_or_null() variant for the old semantic.
+ * In gras_msg_handle, do not discard messages without callback.
+ They are probably messages to be explicitly awaited later (ie, proofs of
+ mis-synchronization in userland since they are sent before being awaited)
+ No big deal usually.
+ * gras_socket_meas_send/recv: semantic changed!
+ The numerical arguments used to be (1) the total amount of data to send
+ and (2) msg_size. This was changed to (1) msg_size and (2) amount of
+ messages. This was need for the fool willing to send more than MAXINT
+ bytes on quite fat pipes.
+
+ AMOK:
+ * Do really rename the hostmanagement module to peermanagement. [Mt]
+ Ie, rename functions from amok_hm_* to amok_pm_*. This breaks the API,
+ but this is rather new and this was documented in the module
+ documentation (poor excuses, I admit)
+ * Bandwidth measurement semantic changed! This follows the changes to
+ gras_socket_meas_send/recv explained above.
+
+ SIMDAG:
+ * A sequential mode has been added to the workstations. When a workstation
+ is in sequential mode, it can execute only one task, and the other tasks
+ are waiting in a FIFO. [Christophe Thiery]
+
+ SURF:
+ * The KCCFLN05 workstation model now handles parallel tasks. It is the
+ model for SIMDAG. [Christophe Thiery]
+ * Bug fix in the maxmin solver: Some values were close to 0 instead of
+ equal to 0, which caused some bad behaviors in
+ saturated_constraint_set_update. I now use a threshold mechanism like in
+ surf. [AL]
+
+ XBT:
+ * When running manually src/testall, you select specific units [Mt]
+ testall is the result of our cunit mecanism, and should replace all
+ the scripty thingy around since bash don't run easily on billware.
+
+ * A mallocator system has been added. [Christophe Thiery]
+ Mallocators allow you to recycle your unused objects instead of freeing them
+ and allocating new ones.
+
+ Documentation update:
+ * FAQ reworking + New FAQs:
+ - "Valgrind spits tons of errors!" [Mt]
+ - "How to repport bugs" [Mt]
+ - "Cross-compiling a Windows DLL of SimGrid from Linux" [Mt]
+ - "What is the difference between MSG, SimDag, and GRAS?" [Mt]
+ - Communication time measurement within MSG [AL]
+ - I experience weird communication times when I change the latency [AL]
+ * GRAS tutorial [Mt]
+ It contains:
+ - an introduction to the framework and to the used communication model
+ - an initiatic tour introducing the most proheminent features:
+ o Part 1: Bases
+ . Lesson 0: Installing GRAS
+ . Lesson 1: Setting up your own project
+ o Part 2: Message passing
+ . Lesson 2: Exchanging simple messages
+ . Lesson 3: Passing arguments to the processes (in SG)
+ . Lesson 4: Attaching callbacks to messages
+ . Lesson 5: Using globals in processes
+ . Lesson 6: Logging informations properly
+ . Lesson 7: Using internal timers
+ . Lesson 8: Handling errors through exceptions
+ . Lesson 9: Exchanging simple data
+ . Lesson 10: Remote Procedure Calling (RPC)
+ . Lesson 11: Explicitely waiting for messages
+ . Recapping of message passing features in GRAS
+ - A HOWTO section containing:
+ o HOWTO design a GRAS application
+ More are due, of course. They will come latter. In the meanwhile, you can
+ check the examples which are still here.
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri Mar 16 21:11:46 CET 2007
+
+SimGrid (3.1) stable; urgency=high
+
+ General:
+ * Port to gcc 4.x
+ There was a stack corruption somewhere, visible only when optimizing
+ with these versions. [Vince]
+
+ SIMDAG:
+ * This is a NEW module! SimDAG (SD for short) is a revival of the old SG
+ module that enabled to play with Directed Acyclic Graphs. It is built
+ directly on top of SURF and provides an API rather close to the old
+ SG. Some old codes using SG are currently under rewrite to check that
+ all needful functions are provided. [Christophe Thiery]
+
+ SURF:
+ * Complete rewrite of the KCCFLN05 workstation model. It is now an
+ extension of the classical CLM03 model that gracefully handles
+ failures. This is now the default model for MSG and GRAS. It doesn't
+ handle parallel tasks yet though. [AL]
+ * Bug fix: Weights were not correctly set in the network part.
+ WARNING: This may have resulted in incorrect results with simulations
+ where there are more than one flow on a given link. [AL]
+
+ SURF, MSG, GRAS:
+ * After a (long ?) discussion on simgrid-devel, we have decided that the
+ convention we had on units was stupid. That is why it has been decided
+ to move from (MBits, MFlops, seconds) to (Bits, Flops, seconds).
+ WARNING : This means that all previous platform files will not work as
+ such with this version! A warning is issued to ask users to update
+ their files. [AL]
+ A conversion script can be found in the contrib module of the CVS, under
+ the name contrib/platform_generation/surfxml_update.pl [MQ]
+
+ MSG,GRAS:
+ * Bug fix: Processes were started in reverse order, wrt deployment file.
+ WARNING: if your code relies on this bug, please fix it. [AL]
+ * Bug fix: Add a test in MSG_task_execute to stop whenever a task is
+ being executed on two different locations. [AL]
+ * Bug fix: Failures are now better supported thanks to Derrick's tests
+ (there was many failure situations I hadn't thought of and that weren't
+ correctly handled). [AL]
+ * New function: MSG_host_is_avail indicates you whether a given m_host_t
+ is up or down. [AL]
+
+ GRAS:
+ * New! a real RPC mecanism, as it ought to be since too long. [MQ]
+ Exception occurring on server-side are propagated back to client (!).
+
+ API CHANGE: the callback changed their prototype. Change:
+ int my_handler(gras_socket_t expeditor, void *payload_data) {
+ to:
+ int my_handler(gras_msg_cb_ctx_t ctx , void *payload_data) {
+ gras_socket_t expeditor=gras_msg_cb_ctx_from(ctx);
+ and you're set.
+ * New! function: gras_msg_handleall to deal with all messages arriving
+ within a given period.
+ * New! function: gras_socket_server_range to get a server socket in a
+ range of port numbers (ease to avoid port number conflicts) [MQ]
+ * New! gras processes display their backtrace when they get a SIGUSR1
+ or when Ctrl-C is pressed. Use Ctrl-C Ctrl-C to exit.
+ Sweet to debug RL processes [MQ]
+
+ AMOK:
+ * Bandwidth module:
+ - Do not force experiment sizes to be expressed in kb, or it becomes
+ impossible to measure the latency this way (needs one byte-long tests)
+ WARNING: this changes the amok_bw_* function semantic. [MQ]
+ - Implements the link saturation stuff. [MQ]
+ * Peer management module:
+ New! module factorizing code that we wrote over and over [MQ].
+
+ XBT:
+ * New module: cunit (my jUnit implementation in ansi C) [MQ]
+ - Test units are placed directly into the library code, they get extracted
+ automatically and placed into the src/testall binary.
+ - Convert most of the XBT tests to this system.
+ * New functions: xbt_dynar_getfirst_as() and xbt_dynar_getlast_as() [MQ]
+ * XML parsing: rewrote parts of flexml to enable multiple xml parsers to
+ live in the same C code. This required to change a little bit the API
+ of surfxml parsing but shouldn't be an issue for end-users. [AL]
+ * New module: sparse graph structure with basic algorithms (this is work
+ in progress and the API is not considered to be frozen yet). [AL]
+ * Display more information on backtraces: source line & function names are
+ now displayed just like valgrind does (rely on addr2line tool) [MQ]
+ * New function: xbt_backtrace_display(). Sweet while debuging [MQ]
+ * Reworked a little bit some #include statements to load only required
+ headers. Some user code that relied on SimGrid to include stdlib or
+ stdio may need to include it by themselves. [AL]
+ * Fixed xbt/log.h. A missing SG_BEGIN_DECL prevented compilation with
+ g++. [AL]
+ * Renamed xbt_host_t into xbt_peer_t since it betterly describes what I
+ meant. This breaks the API of AMOK and of xbt/config. Sorry about this,
+ but I guess that almost nobody used those parts. [MQ]
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri, 14 Jul 2006 01:32:27 +0200
+
+SimGrid (3.0.1) stable; urgency=low
+
+ XBT:
+ * Unfortunately, I had missed 5 misnamed functions:
+ xbt_fifo_item_t xbt_fifo_newitem(void);
+ void xbt_fifo_freeitem(xbt_fifo_item_t);
+ xbt_fifo_item_t xbt_fifo_getFirstItem(xbt_fifo_t l);
+ xbt_fifo_item_t xbt_fifo_getNextItem(xbt_fifo_item_t i);
+ xbt_fifo_item_t xbt_fifo_getPrevItem(xbt_fifo_item_t i);
+ They're now deprecated. Please use their new versions:
+ xbt_fifo_item_t xbt_fifo_new_item(void);
+ void xbt_fifo_free_item(xbt_fifo_item_t);
+ xbt_fifo_item_t xbt_fifo_get_first_item(xbt_fifo_t l);
+ xbt_fifo_item_t xbt_fifo_get_next_item(xbt_fifo_item_t i);
+ xbt_fifo_item_t xbt_fifo_get_prev_item(xbt_fifo_item_t i);
+ [AL]
+ * Bugfix: really disconnect fifo items which are remove_item()ed [AL]
+ * Documentation: xbt_log module unmercifully reworked [MQ]
+ * Bugfix: there was a problem with the ending of contexts with
+ the pthread backend. It caused some weird deadlock or behavior
+ depending on the pthread implementation. [AL]
+ * Bugfix: get the exceptions raised in the simulator repport where
+ and why they come from when they are not catched in time [AL, MQ]
+
+ SURF:
+ * Bugfix: Do repport the error when two non-connected hosts try to
+ exchange data (Thanks to Flavien for stumbling into this one) [AL]
+
+ SURF:
+ * Add additionnal checkings on communications. Assert that two
+ communicating hosts are connected by a set of links... [AL]
+
+ MSG:
+ * Add additionnal checkings on channel values in communication [AL]
+ * New: MSG_task_get_source to see on which host a task was generated [HC]
+ * New: int MSG_task_probe_from_host(int channel, m_host_t host): returns
+ the number of tasks waiting to be received on channel and sent
+ by host. [AL]
+ * New: MSG_error_t MSG_task_get_from_host(m_task_t * task, int channel, m_host_t host);
+ waits for the first task coming from a given host.. [AL]
+
+ GRAS new functionnalities: [MQ]
+ * Enhance the parsing macro to allow the size of multidimentional objects
+ to be given thru annotations.
+ * New example (and documentation): Matrix Multiplication a la RPC
+ (as when I was young!) and fix a bunch of bugs found on the way.
+
+ GRAS performance improvements: [MQ]
+ [DataDesc]
+ * Reduce the amount of cbps creation/destruction by making it static to
+ datadesc_send/recv() and using a (newly created) cbps_reset (based on
+ dynar_reset ())
+ [Virtu]
+ * Change libdata to a set so that we can search for stuff by ID (and thus
+ reduce the insane amount of dict lookups)
+
+ [Transport]
+ * Actually implement gras_datadesc_copy() so that we don't have to mimick
+ RL communication on top of SG since it's so uneffective.
+ It may also be used for inter-thread communication in RL, one day.
+ * Use gras_datadesc_copy() to exchange messages on top of SG
+ Allows to:
+ - improve message exchange performance on top of SG
+ - deprecate transport_plugin_sg.c:gras_trp_sg_chunk_send() & recv()
+ * Don't exchange on the network the size of the used part of buffer,
+ instead, specify the possible buffer size to read().
+ Advantages:
+ - reduces the amount of read/write calls (one pair per exchange)
+ - reduces the amount of exchanged data (the size)
+ - allows to retrieve all arrived data on receiver side, if we don't need
+ it right now (subsequent read will peek the buffer)
+ - allows the receiver to proceed with the begining of the stream before
+ everything is arrived
+ - make it possible to build an iov transport (using readv/writev)
+ Extra difficulty:
+ - take care of the data with non-stable storage (like stacked data),
+ and bufferize them.
+ * If possible, TCP send uses vector I/O (when writev() is here)
+ - Don't use it for receive since we send data sizes and data on the
+ same stream, so we wouldn't be able to chain large amount of chunks
+ before having to flush the stuff to read the size.
+ * Rework the transport plugin mecanism to simplify it and reduce the
+ amount of pointer dereferencement when searching for the right function
+ to use.
+
+ * I guess that now, we do almost as few system calls as possible while
+ doing as few data copy as possible.
+
+ To improve it further, we could try to send all the sizes first and then
+ all the data (to use iov on receiving size), but it's only a partial
+ solution: when you have 2 dimensional data, the sizes of the second
+ dimension is data of the first dimension, so you need 3 streams.
+
+ I'm not sure the potential performance gains justify the coding burden.
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri, 21 Oct 2005 14:42:20 +0200
+
+SimGrid (3.00) stable; urgency=high
+
+ SURF:
+ * New! Give the possibility to hijack the surf parser and thus bypass
+ MSG_create_environment and MSG_launch_application. Have a look at
+ examples/msg/msg_test_surfxml_bypassed.c to see how it can be done.
+
+ -- Arnaud Legrand <simgrid-devel@lists.gforge.inria.fr> Sat, 20 Aug 2005 23:25:25 -0700
+
+SimGrid (2.96) unstable; urgency=low
+
+ AKA SimGrid 3 rc 2.
+
+ XBT:
+ * New! Exception handling with setjmp or such (code from OSSP ex) [MQ]
+ This deprecates the xbt_error_t mecanisms.
+ It modifies (simplifies) all XBT and GRAS API.
+ MSG API keeps unchanged (exceptions raised by XBT are catched from
+ within MSG and masked with existing error handling facilities)
+
+ SURF:
+ * New! Add a FATPIPE model. [AL]
+ * New! Add a parallel task model. [AL]
+ * New! Add automatically a loopback interface (in the default
+ network model) if none was precised.
+
+ MSG
+ * Bugfix: MSG_process_resume now works with the current running process.
+ [AL]
+ * New! Add MSG_parallel_task_create and MSG_parallel_task_execute. [AL]
+ * Modification of MSG_task_get_compute_duration. Once a task has been
+ processed, the value returned by this function is now equal to 0. [AL]
+ * New! Add double MSG_task_get_remaining_computation(m_task_t task) and
+ MSG_error_t MSG_task_cancel(m_task_t task). Add a state
+ (MSG_TASK_CANCELLED) to MSG_error_t corresponding to the cancelation
+ of a m_task. For now, MSG_task_cancel only works with computation
+ tasks. [AL]
+ * New! Add double MSG_get_host_speed(m_host_t h) that returns the speed
+ of the processor (in Mflop/s) regardless of the current load on the
+ machine. [AL]
+ * API Change: use proper naming convention for MSG_getClock and
+ MSG_process_isSuspended: MSG_get_clock and MSG_process_is_suspended.
+ [AL]
+ * New! Add void MSG_task_set_priority(m_task_t task, double priority).
+ This function changes the priority of a computation task. This priority
+ doesn't affect the transfer rate. A priority of 2 will make a task
+ receive two times more cpu power than the other ones. This function
+ has been added to suit the needs of Nguyen The Loc and hasn't been that
+ much tested yet. So if it fails, please report it and send me your code.
+ [AL]
+ * API Change: removed all functions and types that were marked "deprecated"
+ since many months. Renamed MSG_global_init_args to MSG_global_init.
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Mon, 8 Aug 2005 17:58:47 -0700
+
+SimGrid (2.95) unstable; urgency=low
+
+ XBT
+ * Steal some nice code to GNU pth to fix context detection and usage [AL]
+ * Cleanup in the xbt_config API; add configuration callbacks. [MQ]
+ * Cleanup in the initialization API: the unused "defaultlog" is dead. [MQ]
+
+ SURF
+ * Bugfix: Allow absolute paths for platform description files [MQ]
+ * Bugfix: do free the variables after use. Leads to drastic performance
+ improvement [AL]
+ * Implement max_duration (ie, timeouts) on resources [AL]
+
+ MSG
+ * Implement MSG_config to configure MSG at runtime. xbt_cfg test on a real
+ case ;) [MQ]
+ * Implement MSG_channel_select_from() to help GRAS now that SURF provide
+ the needed support (timeouts) [AL]
+
+ GRAS (new features)
+ * Implement measurement sockets. You can now get the bandwidth between two
+ hosts thanks to AMOK (see below). [MQ]
+ * gras_datadesc_dynar() builds a dynar type descriptor, allowing to send
+ dynar over the network (yeah) [MQ]
+ * Real (even if simplistic) implementation of gras_os_myname() on RL [MQ]
+ * simple/static token-ring example. [Alexandre Colucci and MQ]
+ * Use MSG_channel_select_from() and remove the *slow* hack we had to put
+ in place before [MQ]
+
+ GRAS (bug fixes)
+ * Differentiate the types "char[22]" and "unsigned char[22]" in automatic
+ type parsing. "short" and "long" modifiers were also ignored; other
+ modifier (such as reference level) are still ignored. [MQ]
+ * Embeed the buffer size within the buffer itself on SG. [MQ]
+ That way, send() are atomic and cannot get intermixed anymore (at least
+ the ones which are less than 100k; bigger messages still have the issue)
+ * Array size pushed by the field, not by the field type (or each
+ and every long int will push stuff to the cbps) [MQ]
+ * use select() to sleep since it allows to portably sleep less than one
+ second. [MQ]
+
+ GRAS (minor cleanups)
+ * <project>.Makefile.local (generated from gras_stub_generator) |MQ]:
+ - Do clean .o files
+ - Compile with -g
+ * Type Callbacks now receive the gras_datadesc_type_t they work on as argument.
+ * type category 'ignored' killed as it was never used and were difficult
+ to transmit.
+ * whether a type can cycle or not is now a flag, leaving room for more
+ flags (as "ignored", if we feel the need one day ;)
+ * Rename raw sockets to measurement sockets since "raw" has another
+ meaning in networking community.
+
+ AMOK
+ * Advanced Metacomputing Overlay Kit introduction. It is based over GRAS
+ and offers features not belonging to GRAS but that most applications
+ need. One day, it may be a set of plugins loadable at runtime.
+ * New module: bandwidth
+ bandwidth measurement between arbitrary nodes running this module. [MQ]
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Thu, 30 Jun 2005 16:29:20 -0700
+
+SimGrid (2.94) unstable; urgency=low
+
+ The first beta release of SimGrid 3 !
+
+ >>>Arnaud<<<
+ (documentation)
+ * Update the main page and the FAQ. Adding references to gforge.
+
+ (gras)
+ * Add a gras_os_getpid function.
+
+ (msg)
+ * Add MSG_task_get_compute_duration() and MSG_task_get_data_size()
+ * Extend the logs so that they also print PID, hostname, date, ... if
+ available.
+ * Convert the MSG example to the use of xbt_logs instead of PRINT_MESSAGE,
+ and kill the old version which were in testsuite/
+ * Rewrite tools/MSG_visualization/colorize.pl for using with logs instead
+ of PRINT_MESSAGE
+
+ (xbt)
+ * Add xbt_os_time(). As the rest of xbt/portability, this is not public
+ for users. Instead, each programming environment (GRAS, MSG,...) use it
+ when needed to provide such a feature to users.
+ Don't shortcut the mecanism or you will also shortcut the virtualization
+ you need on the simulator.
+
+ >>>Martin<<<
+ (infrastructure)
+ * Cleanups in configury with regard to compile optimization/warning flags.
+ Also add -fno-loop-optimize to any powerpc since it's the optimization
+ killing gcc (< 3.4.0).
+ * Doxygen cleanups: move MSG examples, kill the second Doxygen phase
+ needed by MSG examples complications
+ * Borrow configury beautifications from PHP
+
+ (xbt)
+ * Bugfix: XBT_LOG_NEW_DEFAULT_CATEGORY now compiles without compiler
+ warning (thanks loris for stumbling into this one).
+ * Bugfix: stop loading private headers (gras_config.h) from the public
+ ones (xbt/swag.h).
+
+ (gras)
+ * Change SIMGRID_INSTALL_PATH to GRAS_ROOT in Makefiles generated for user.
+ * Rename gras_get_my_fqdn to gras_os_myname and implement it in the simulator
+ RL would imply a DNS resolver, which is *hard* to do in a portable way
+ (and therefore delayed).
+ * Implement a real timer mecanism and use it in timing macros. This allows
+ to avoid rounding errors and get a 0.000005 sec precision in timing
+ macros. While I was at it, various cleanups:
+ - allow to declare more than one timed section per file (fix a stupid bug)
+ - move some private declaration to the right place
+ - merge conditional execution and timing macros into emulation module
+ - document the module
+ - make sure the module cleanups its mess on gras_exit
+ * Documentation improvements:
+ - (new) how to compile applications using GRAS
+ - (new) emulation support (timing macros)
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Fri, 13 May 2005 10:49:31 +0200
+
+SimGrid (2.93) unstable; urgency=low
+
+ Alpha 4 on the path to SimGrid 3 (aka the "neuf-trois" version)
+
+ [Arnaud]
+ - Use Paje properly where used. Still to be sanitized properly.
+ - Portability fix: Add an implementation of the contexts using pthread
+
+ [Martin]
+ (misc)
+ - Add xbt_procname(): returns the name of the current process.
+ Use it to show the current process's name in all logging.
+ (infrastructure)
+ - fix detection of older flex version and the reaction, since we do
+ depend on modern ones (we use lex_destroy)
+ - Better separation of SG and RL in the libs: remove all simulation code
+ from libgras. As a result, this lib is now only 200k when stripped.
+ Some of the xbt modules may also be duplicated (two sets and such) and
+ should be cleaned/killed before SG3.
+ - Insist on using xlC on AIX because of weird problems involving gcc there.
+ - Cleanup the make remote stuff. This is now done by scripts
+ tools/graspe-{master,slave} (GRAS Platform Expender). This is still
+ mainly for our private use, but we're working on changing them to user
+ tools, too.
+ (gras)
+ - Bugfix: flush the socket on close only if there is some *output*.
+ - Bugfix: flush idempotent when there's nothing to send (don't send size=0)
+ (msg)
+ - Add MSG_task_get_name. The task names are mainly for debugging purpose,
+ but anyway.
+
+ -- SimGrid team <simgrid2-users@listes.ens-lyon.fr> Fri, 4 Mar 2005 14:32:37 -0800
+
+SimGrid (2.92) unstable; urgency=low
+
+ Alpha 3 on the path to SimGrid 3
+
+ [Arnaud]
+ (gras)
+ - New! First try of benchmarking macros.
+ - New! First try so that gras_stub_generator generate deployment and
+ remote compilation helpers.
+ (msg)
+ - Bugfix: Initialization fix in msg_test.
+
+ [Martin]
+ (surf)
+ - Bugfix: applied patch to lexer so that it doesn't need a huge heap.
+ (xbt)
+ - Bugfix: let dicts work with NULL content (_foreach didn't) and cleanups
+ (gras)
+ - API Change: gras_os_sleep to take the amount of seconds as a double.
+ Accepting an int was error prone since it was the only location where
+ seconds were coded as such. It leaded to damn rounding errors.
+ - Bugfix: Hard to belive that timers ever worked before this.
+
+ -- SimGrid team <simgrid2-users@listes.ens-lyon.fr> Wed, 23 Feb 2005 22:09:21 +0100
+
+SimGrid (2.91) unstable; urgency=low
+
+ Alpha 2 on the path to SimGrid 3
+
+ [Arnaud]
+ (surf)
+ - Bug fix in the lmm_solver.
+ (msg)
+ - New! Interface to Paje (see http://www-id.imag.fr/Logiciels/paje/)
+ through the function MSG_paje_output.
+ - New! Introducing two new functions MSG_process_kill() and MSG_process_killall().
+ - It is possible to bound the rate of a communication in MSG with
+ MSG_task_put_bounded() (was already in the previous version but I had forgotten
+ to write it in the changelog).
+ - Bug fix to let GRAS run on top of MSG until we move it directly on top
+ of the SURF.
+
+ [Martin]
+ (infrastructure)
+ - Various cleanups to the autotools stuff
+ - Begin to move Gras examples to examples/gras/
+ - Let make distcheck work again (yeah!)
+ (documentation)
+ - documentation overhauled using doxygen.
+ gtk-doc-tools is dead in SimGrid now.
+ - Automatically extract all existing logging categories, and add the list
+ to the documentation (long standing one, to say the less)
+ (gras)
+ - Cleanup the known architecture table. Reorder the entries to group what
+ should be, and use a more consistent naming scheme.
+ (some of the test dataset are still to be regenerated)
+ - New! Allow library to register globals on each process just as userdata
+ does.
+ This is implemented using a xbt_dict and not a xbt_set, so we loose the
+ lookup time (for now).
+ Use it in msg and trp.
+ This cleans a lot the internals and helps enforcing privacy of the
+ headers between the gras components.
+ - New! Add a timer mechanism, not unlike cron(8) and at(1).
+ - Bugfix: gras_os_time was delirious in RL.
+ - Bugfix: gras_trp_select/RL don't run into the wall when asked to select
+ onto 0 sockets.
+ - Reenable GRAS now that it works.
+
+ -- Arnaud Legrand <Arnaud.Legrand@imag.fr> Mon, 14 Feb 2005 14:02:13 -0800
+
+SimGrid (2.90) unstable; urgency=low
+
+ Alpha 1 on the path to SimGrid 3
+
+ * It is a long time since the last release of SimGrid. I'm sorry about
+ that but as I had told you, I was rewriting a lot of things. I apologize
+ to those who had been reporting bugs to me and that I had not answered.
+ If your bug is still in the new version, please tell me. Here is a
+ summary of the main changes.
+
+ * REVOLUTION 1: The SimGrid project has merged with the GRAS project
+ lead by Martin Quinson. As a consequence SimGrid gains a lot in
+ portability, speed, and a lot more but you'll figure it out later.
+ SimGrid now comprises 3 different projects : MSG, GRAS and SMPI.
+ I wanted to release the new MSG as soon as possible and I have
+ broken GRAS, which is the reason why, for now, only MSG is fully
+ functional. A laconic description of these projects is available
+ in the documentation.
+
+ * REVOLUTION 2: I have removed SG and I am now using a new simulation
+ kernel optimized for our needs (called SURF but only the developers
+ should use it). Hence, MSG is now roughly 30 times faster and I think
+ that by rewriting a little bit MSG, I could event speed it up a little
+ bit more. Beside the gain in speed, it is also much easier to encode a
+ new platform model with SURF than it was with SG. More to come...
+
+ * REVOLUTION 3: I have tried to change a little as possible the API of
+ MSG but a few things really had to disappear. The main differences
+ with the previous version are :
+ 1) no more m_links_t and the corresponding functions. Platforms are
+ directly read from a XML description and cannot be hard-coded
+ anymore. The same format is used for application deployment
+ description. The new format is described in the documentation.
+ Have a look in tools/platform_generation. There is a tiny script
+ that converts from the old platform format to the new one. Concerning
+ the application deployment format, parsing the old one is tricky.
+ I think most of you should however be able to convert your files. If
+ it is really an issue, I can write a C code that does the conversion.
+ Let me know.
+ 2) the toolbox tbx does not exist anymore. We now have a library
+ with much more data-structures but without the hash-tables (we have
+ dictionaries that are much faster).
+
+ -- Arnaud Legrand <Arnaud.Legrand@imag.fr> Mon, 31 Jan 2005 10:45:53 -0800
+
+*****************************************************************************
+* Follows the old GRAS changelog. It does not follow the same syntax, but I *
+* don't feel like converting the oldies. (Mt) *
+*****************************************************************************
+
+2005-01-31 Arnaud
+ Version 2.90: "the long awaited one"
+ - Finished rewriting and debugging MSG. Rewrote the documentation.
+ - disable GRAS for now since it needs to be ported to the newest SG
+
+2004-12-16 Martin
+ - Finish the port to windows (using mingw32 for cross-compile)
+
+2004-11-28 Arnaud
+ - Main loop and datastructures of SURF. A cpu resource object is
+ functional. Surf can thus be used to create cpu's with variable
+ performance on which you can execute some actions.
+
+2004-11-15 Martin Quinson
+ - Port to ARM. Simply added the alignment and size descriptions. Should
+ work, but the ARM machines are so slow that I didn't had the opportunity
+ to 'make check' over there yet.
+
+2004-11-15 Arnaud Legrand
+ - Trace manager now written. It uses a heap structure and is therefore
+ expected to be efficient. It may however be speeded up (particularly
+ when many events occur at the same date) by using red and black
+ trees. One day maybe...
+ - Max-min linear system solver written. It uses a sparse matrix
+ structure taking advantage of its expected use. Most operations are
+ O(1) and free/calloc are called as few as possible. The computation of
+ the minimum could however be improved by using a red and black tree
+ (again ! ;).
+
2004-11-03 Arnaud Legrand
- Rename every gras_* function that was in xbt/ to its xbt_
counterpart.
- Add a heap and a doubly-linked list to xbt
- - Added a dichotomy to the dictionnaries. make check works as well before
+ - Added a dichotomy to the dictionaries. make check works as well before
so I assume that the patch is correct. I do not know however if things
run effectively faster than before now. :)
+ Inclusion of the SimGrid tree in the GRAS one. The archive is renamed to
+ SimGrid, and the version number is bumped to 2.x
+
2004-10-29 Martin Quinson
- Introduction of the remote errors.
They are the result of a RMI/RPC on the remote machine.
ErrCodes being scalar values, you can't get the host on which those
- errors did happen. Extending the error mecanism as in Gnome is possible.
+ errors did happen. Extending the error mechanism as in Gnome is possible.
No idea yet whether it is a good idea.
2004-10-28 Martin Quinson
Note that the cycle detection is off by default since it impacts the
performance. Watch the data you feed GRAS with ;)
- This property is hereditary. Any element embeeded in a structure having it
+ This property is hereditary. Any element embedded in a structure having it
set have it set for the time of this data exchange.
You should set it both on sender and receiver side. If you don't set it on
It should allow to kill the last bits of gras first version soon.
- This is not completely satisfactory yet (dupplicate code with
- chunk_{send,recv}; a bit out of the plugin mecanism), but it should
+ This is not completely satisfactory yet (duplicate code with
+ chunk_{send,recv}; a bit out of the plugin mechanism), but it should
work.
- Simplify transport plugin (internal) interface by not passing any
- argument to _server and _client, but embeeding them in the socket
+ argument to _server and _client, but embedding them in the socket
struct directly.
2004-09-28 Martin Quinson
- Improvement to the remote testing toysuite
2004-07-10 Martin Quinson
- [autoconf mecanism]
+ [autoconf mechanism]
- get ride of a bunch of deprecated macros
- actually run the test for two-compliment, not only compile it :-/
- test whether the structures get packed (and bail out if yes. Damn.
2004-04-19 Martin Quinson
[Data description]
- - register init/exit functions within gras module mecanism
+ - register init/exit functions within gras module mechanism
- send/receive function.
Convertion is not implemented, but short-cutted if not needed.
struct/array elements are sent one by one (instead of block-wise), but
- Get rid of libgrasutils.a since it makes more trouble than it solves.
Build examples against the RL library, since there is no way to disable
its creation for now.
+
+For information, the beginning of coding on GRAS was back in june
+2003. I guess that every line has been rewritten at least twice since
+then.
