For the last two items, there are essentially two possible ways you can provide
this information as an input:
-\li You can program it, either by using the Lua console (
- \ref MSG_Lua_funct) or, if you're using MSG, some of MSG's platform and
+\li You can program, if you're using MSG, some of MSG's platform and
deployment functions (\ref msg_simulation). If you want to use this,
check the particular documentation. (You can also check the section
\ref pf_flexml_bypassing, however, this documentation is deprecated;
there is a new, but undocumented, way to do it properly).
\li You can use two XML files: one contains the platform description while
- the other contains the deployment instructions.
+ the other contains the deployment instructions. The platform description
+ can also be in Lua format.
For more information on SimGrid's deployment features, please refer to
the \ref deployment documentation.
The XML checking is done based on the Document Type Definition (DTD) file,
available at
-<a href="http://simgrid.gforge.inria.fr/simgrid.dtd">http://simgrid.gforge.inria.fr/simgrid.dtd</a>.
+<a href="http://simgrid.gforge.inria.fr/simgrid/simgrid.dtd">http://simgrid.gforge.inria.fr/simgrid/simgrid.dtd</a>.
If you read the DTD, you should notice the following:
-\li The platform tags contain a version attribute; the current version is 3.
+\li The platform tags contain a version attribute; the current version is 4.
This property might be used in the future to provide backwards
compatibility.
\li The DTD contains definitions for the two files used by SimGrid (i.e.,
<b>Example:</b>
-\verbatim
+\code
<AS id="AS0" routing="Full">
<host id="host1" power="1000000000"/>
<host id="host2" power="1000000000"/>
<link id="link1" bandwidth="125000000" latency="0.000100"/>
<route src="host1" dst="host2"><link_ctn id="link1"/></route>
</AS>
-\endverbatim
+\endcode
In this example, AS0 contains two hosts (host1 and host2). The route
between the hosts goes through link1.
#### Adding a trace file ####
\verbatim
-<platform version="1">
- <host id="bob" power="500000000" availability_file="bob.trace" />
+<platform version="4">
+ <host id="bob" power="500Gf" availability_file="bob.trace" />
</platform>
\endverbatim
#### Example: Expliciting the default value "ON" ####
\verbatim
-<platform version="1">
- <host id="bob" power="500000000" state="ON" />
+<platform version="4">
+ <host id="bob" power="500Gf" state="ON" />
</platform>
\endverbatim
#### Adding a state file ####
\verbatim
-<platform version="1">
- <host id="bob" power="500000000" state_file="bob.fail" />
+<platform version="4">
+ <host id="bob" power="500Gf" state_file="bob.fail" />
</platform>
\endverbatim
loopback_bw | no | int | Bandwidth for loopback (if any). See <b>link</b> section for syntax/details. If loopback_bw and loopback_lat (see below) attributes are omitted, no loopback link is created and all intra-node communication will use the main network link of the node. Loopback link is a \ref pf_sharing_policy_fatpipe "\b FATPIPE".
loopback_lat | no | int | Latency for loopback (if any). See <b>link</b> section for syntax/details. See loopback_bw for more info.
topology | no | FLAT\|TORUS\|FAT_TREE (default: FLAT) | Network topology to use. SimGrid currently supports FLAT (with or without backbone, as described before), <a href="http://en.wikipedia.org/wiki/Torus_interconnect">TORUS </a> and FAT_TREE attributes for this tag.
-topo_parameters | no | string | Specific parameters to pass for the topology defined in the topology tag. For torus networks, comma-separated list of the number of nodes in each dimension of the torus. For fat trees, refer to \ref AsClusterFatTree "AsClusterFatTree documentation".
+topo_parameters | no | string | Specific parameters to pass for the topology defined in the topology tag. For torus networks, comma-separated list of the number of nodes in each dimension of the torus. For fat trees, refer to \ref simgrid::surf::AsClusterFatTree "AsClusterFatTree documentation".
TODO
Attribute name | Mandatory | Values | Description
--------------- | --------- | ------ | -----------
id | yes | string | The identifier of the router to be used when referring to it.
-coordinates | yes | string | Must be provided when choosing the Vivaldi, coordinate-based routing model for the AS the router belongs to. More details can be found in the Section \ref pf_P2P_tags.
+coordinates | no | string | Must be provided when choosing the Vivaldi, coordinate-based routing model for the AS the router belongs to. More details can be found in the Section \ref pf_P2P_tags.
#### Example ####
\subsubsection pf_backbone <backbone/>
\note
- This tag is <b>only available</b> when the containing AS uses the "Cluster" mode!
+ This tag is <b>only available</b> when the containing AS uses the "Cluster" routing mode!
Using this tag, you can designate an already existing link to be a backbone.
msg_file_management ; access functions are organized as a POSIX-like
interface.
-\subsubsection pf_sto_conc Storage Main concepts
-Basically there are 3 different entities available in SimGrid that
-can be used to model storage:
+\subsubsection pf_sto_conc Storage - Main Concepts
+
+The storage facilities implemented in SimGrid help to model (and account for)
+storage devices, such as tapes, hard-drives, CD or DVD devices etc.
+A typical situation is depicted in the figure below:
+
+\image html ./webcruft/storage_sample_scenario.png
+\image latex ./webcruft/storage_sample_scenario.png "storage_sample_scenario" width=\textwidth
+
+In this figure, two hosts called Bob and Alice are interconnected via a network
+and each host is physically attached to a disk; it is not only possible for each host to
+mount the disk they are attached to directly, but they can also mount disks
+that are in a remote location. In this example, Bob mounts Alice's disk remotely
+and accesses the storage via the network.
+
+SimGrid provides 3 different entities that can be used to model setups
+that include storage facilities:
Entity name | Description
--------------- | -----------
#### Example Files ####
-This is an automatically generated list of example files that use the \c <link_ctn/gt;
+This is an automatically generated list of example files that use the \c <link_ctn/>
entity (the path is given relative to SimGrid's source directory):
\verbinclude example_filelist_xmltag_linkctn
\verbatim
<?xml version='1.0'?>
<!DOCTYPE platform SYSTEM "http://simgrid.gforge.inria.fr/simgrid.dtd">
-<platform version="3">
+<platform version="4">
<config id="General">
<prop id="maxmin/precision" value="0.000010"></prop>
<prop id="cpu/optim" value="TI"></prop>
\verbatim
<?xml version='1.0'?>
<!DOCTYPE platform SYSTEM "http://simgrid.gforge.inria.fr/simgrid.dtd">
-<platform version="3">
+<platform version="4">
<AS id="main" routing="Full">
<include file="clusterA.xml"></include>
<include file="clusterB.xml"></include>
\verbatim
<?xml version='1.0'?>
<!DOCTYPE platform SYSTEM "http://simgrid.gforge.inria.fr/simgrid.dtd">
-<platform version="3">
+<platform version="4">
<config id="General">
<prop id="network/coordinates" value="yes"></prop>
</config>
<AS id="AS0" routing="Vivaldi">
- <host id="100030591" coordinates="25.5 9.4 1.4" power="1500000000.0" />
- <host id="100036570" coordinates="-12.7 -9.9 2.1" power="730000000.0" />
+ <host id="100030591" coordinates="25.5 9.4 1.4" power="1.5Gf" />
+ <host id="100036570" coordinates="-12.7 -9.9 2.1" power="7.3Gf" />
...
- <host id="100429957" coordinates="17.5 6.7 18.8" power="830000000.0" />
+ <host id="100429957" coordinates="17.5 6.7 18.8" power="8.3Gf" />
</AS>
</platform>
\endverbatim
\verbatim
<?xml version='1.0'?>
<!DOCTYPE platform SYSTEM "http://simgrid.gforge.inria.fr/simgrid.dtd">
-<platform version="3">
+<platform version="4">
<config id="General">
<prop id="network/coordinates" value="yes"></prop>
well-formed SimGrid platform XML file might result in the following
"events":
- - start "platform_description" with attribute version="2"
+ - start "platform_description" with attribute version="4"
- start "host" with attributes id="host1" power="1.0"
- end "host"
- start "host" with attributes id="host2" power="2.0"
