# x86
# i.86
-IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86")
+### Determine the assembly flavor that we need today
+include(CMakeDetermineSystem)
+IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
IF(${ARCH_32_BITS})
+ message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
set(PROCESSOR_i686 1)
- set(SIMGRID_SYSTEM_PROCESSOR "${CMAKE_SYSTEM_PROCESSOR}")
- message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}")
ELSE()
- message(STATUS "System processor: amd64")
- set(SIMGRID_SYSTEM_PROCESSOR "amd64")
+ message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
set(PROCESSOR_x86_64 1)
- set(PROCESSOR_i686 0)
ENDIF()
set(HAVE_RAWCTX 1)
ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^sh")
message(STATUS "System processor: sh")
-ELSE() #PROCESSOR NOT fIND
+ELSE() #PROCESSOR NOT FOUND
message(STATUS "PROCESSOR NOT FOUND: ${CMAKE_SYSTEM_PROCESSOR}")
ENDIF()
+if(ARCH_32_BITS)
+ set(MPI_ADDRESS_SIZE 4)
+else()
+ set(MPI_ADDRESS_SIZE 8)
+endif()
+
message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}")
include(CheckFunctionExists)
TEST_BIG_ENDIAN(BIGENDIAN)
include(FindGraphviz)
-if(WIN32)
- include(FindPcreWin)
-else()
- include(FindPCRE)
-endif()
+include(FindLibSigc++)
set(HAVE_GTNETS 0)
if(enable_gtnets)
include(FindGTnets)
endif()
-if(enable_smpi)
- include(FindF2c)
- SET(HAVE_SMPI 1)
+if(enable_java)
+ find_package(Java REQUIRED COMPONENTS Runtime Development)
+ find_package(JNI REQUIRED)
+ message("-- [Java] JNI found: ${JNI_FOUND}")
+ message("-- [Java] JNI include dirs: ${JNI_INCLUDE_DIRS}")
+ if(enable_maintainer_mode)
+ find_package(SWIG REQUIRED)
+ include(UseSWIG)
+ message("-- [Java] Swig found: ${SWIG_FOUND} (version ${SWIG_VERSION})")
+ endif()
+ set(HAVE_Java 1)
+endif()
+if(enable_scala)
+ find_package(Scala REQUIRED)
+ message("-- [Scala] scalac found: ${SCALA_COMPILE}")
+ set(HAVE_Scala 1)
endif()
if(enable_lua)
include(FindLua51Simgrid)
include(FindNS3)
endif()
+# algorithm 1.50.0
+# function 1.23.0
+# intrusive 1.35.0
+# lambda 1.28.0
+# signals2 1.39.0
+find_package(Boost 1.42 COMPONENTS context)
+if(Boost_FOUND)
+ include_directories(${Boost_INCLUDE_DIRS})
+else()
+ if(APPLE) #MAC
+ message(FATAL_ERROR, "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
+ else()
+ message(FATAL_ERROR, "Failed to find Boost libraries")
+ endif()
+endif()
+
+if(Boost_FOUND AND Boost_CONTEXT_FOUND)
+ # We should use feature detection for this instead:
+ if (Boost_VERSION LESS 105600)
+ message("Found Boost.Context API v1")
+ set(HAVE_BOOST_CONTEXT 1)
+ else()
+ message("Found Boost.Context API v2")
+ set(HAVE_BOOST_CONTEXT 2)
+ endif()
+else()
+ set(HAVE_BOOST_CONTEXT 0)
+endif()
+
# Checks for header libraries functions.
-CHECK_LIBRARY_EXISTS(pthread pthread_create "" pthread)
-CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
-CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
-CHECK_LIBRARY_EXISTS(pthread sem_timedwait "" HAVE_SEM_TIMEDWAIT_LIB)
-CHECK_LIBRARY_EXISTS(pthread pthread_mutex_timedlock "" HAVE_MUTEX_TIMEDLOCK_LIB)
-CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
+CHECK_LIBRARY_EXISTS(dl dlopen "" HAVE_DLOPEN_IN_LIBDL)
+CHECK_LIBRARY_EXISTS(execinfo backtrace "" HAVE_BACKTRACE_IN_LIBEXECINFO)
+CHECK_LIBRARY_EXISTS(pthread pthread_create "" pthread)
+CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
+CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
+CHECK_LIBRARY_EXISTS(pthread sem_timedwait "" HAVE_SEM_TIMEDWAIT_LIB)
+CHECK_LIBRARY_EXISTS(pthread pthread_mutex_timedlock "" HAVE_MUTEX_TIMEDLOCK_LIB)
+CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
+
+if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
+ set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
+endif()
CHECK_INCLUDE_FILES("time.h;sys/time.h" TIME_WITH_SYS_TIME)
CHECK_INCLUDE_FILES("stdlib.h;stdarg.h;string.h;float.h" STDC_HEADERS)
CHECK_INCLUDE_FILE("windows.h" HAVE_WINDOWS_H)
CHECK_INCLUDE_FILE("winsock.h" HAVE_WINSOCK_H)
CHECK_INCLUDE_FILE("winsock2.h" HAVE_WINSOCK2_H)
-CHECK_INCLUDE_FILE("WinDef.h" HAVE_WINDEF_H)
+CHECK_INCLUDE_FILE("windef.h" HAVE_WINDEF_H)
CHECK_INCLUDE_FILE("errno.h" HAVE_ERRNO_H)
CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
CHECK_INCLUDE_FILE("time.h" HAVE_TIME_H)
-CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
CHECK_INCLUDE_FILE("inttypes.h" HAVE_INTTYPES_H)
CHECK_INCLUDE_FILE("memory.h" HAVE_MEMORY_H)
CHECK_INCLUDE_FILE("stdlib.h" HAVE_STDLIB_H)
CHECK_FUNCTION_EXISTS(vasprintf HAVE_VASPRINTF)
CHECK_FUNCTION_EXISTS(makecontext HAVE_MAKECONTEXT)
CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
-CHECK_FUNCTION_EXISTS(mergesort HAVE_MERGESORT)
+CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
+CHECK_FUNCTION_EXISTS(strdup SIMGRID_HAVE_STRDUP)
+CHECK_FUNCTION_EXISTS(_strdup SIMGRID_HAVE__STRDUP)
#Check if __thread is defined
execute_process(
)
if(HAVE_thread_storage_run)
- set(HAVE_THREAD_LOCAL_STORAGE 0)
-else()
set(HAVE_THREAD_LOCAL_STORAGE 1)
+else()
+ set(HAVE_THREAD_LOCAL_STORAGE 0)
endif()
# Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
-IF(NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND NOT "${CMAKE_SYSTEM}" MATCHES "GNU")
+IF(NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND NOT "${CMAKE_SYSTEM}" MATCHES "Darwin")
SET(HAVE_MMAP 0)
message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
ENDIF()
+if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
+ SET(HAVE_MMALLOC 1)
+else()
+ SET(HAVE_MMALLOC 0)
+endif()
+
+
if(WIN32) #THOSE FILES ARE FUNCTIONS ARE NOT DETECTED BUT THEY SHOULD...
set(HAVE_UCONTEXT_H 1)
set(HAVE_MAKECONTEXT 1)
set(CONTEXT_UCONTEXT 0)
SET(CONTEXT_THREADS 0)
-SET(HAVE_TRACING 1)
-
-if(enable_tracing)
- SET(HAVE_TRACING 1)
-else()
- SET(HAVE_TRACING 0)
-endif()
if(enable_jedule)
SET(HAVE_JEDULE 1)
SET(MALLOCATOR_IS_WANTED 0)
endif()
-if(enable_model-checking AND HAVE_MMAP)
+if(enable_model-checking AND HAVE_MMALLOC)
SET(HAVE_MC 1)
SET(MMALLOC_WANT_OVERRIDE_LEGACY 1)
include(FindLibunwind)
+ include(FindLibdw)
else()
+ if(enable_model-checking)
+ message(STATUS "Warning: support for model-checking has been disabled because HAVE_MMALLOC is false")
+ endif()
SET(HAVE_MC 0)
+ SET(HAVE_MMALLOC 0)
SET(MMALLOC_WANT_OVERRIDE_LEGACY 0)
endif()
+if(enable_smpi)
+ include(FindGFortran)
+ #really checks for objdump for privatization
+ find_package(BinUtils QUIET)
+ SET(HAVE_SMPI 1)
+
+ if( NOT "${CMAKE_OBJDUMP}" MATCHES "CMAKE_OBJDUMP-NOTFOUND" AND HAVE_MMAP)
+ SET(HAVE_PRIVATIZATION 1)
+ else()
+ SET(HAVE_PRIVATIZATION 0)
+ endif()
+endif()
+
#--------------------------------------------------------------------------------------------------
### Check for some architecture dependent values
CHECK_TYPE_SIZE(int SIZEOF_INT)
CHECK_TYPE_SIZE(void* SIZEOF_VOIDP)
+#--------------------------------------------------------------------------------------------------
+### Check for GNU dynamic linker
+CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
+if (HAVE_DLFCN_H)
+ if(HAVE_DLOPEN_IN_LIBDL)
+ set(DL_LIBRARY "-ldl")
+ endif(HAVE_DLOPEN_IN_LIBDL)
+ execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_GNU_LD_compil
+ )
+ if(HAVE_GNU_LD_compil)
+ set(HAVE_GNU_LD 0)
+ message(STATUS "Warning: test program toward GNU ld failed to compile:")
+ message(STATUS "${HAVE_GNU_LD_comp_output}")
+ else()
+
+ execute_process(COMMAND ./test_gnu_ld
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ RESULT_VARIABLE HAVE_GNU_LD_run
+ OUTPUT_VARIABLE var_exec
+ )
+
+ if(NOT HAVE_GNU_LD_run)
+ set(HAVE_GNU_LD 1)
+ message(STATUS "We are using GNU dynamic linker")
+ else()
+ set(HAVE_GNU_LD 0)
+ message(STATUS "Warning: error while checking for GNU ld:")
+ message(STATUS "Test output: '${var_exec}'")
+ message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
+ endif()
+ file(REMOVE test_gnu_ld)
+ endif()
+endif()
+
+
#--------------------------------------------------------------------------------------------------
### Initialize of CONTEXT THREADS
### Test that we have a way to create semaphores
if(HAVE_SEM_OPEN_LIB)
+ execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
+ )
- exec_program(
- "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_open.c -lpthread -o testprog"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
- )
-
+ # Test sem_open by compiling:
if(HAVE_SEM_OPEN_compil)
set(HAVE_SEM_OPEN 0)
message(STATUS "Warning: sem_open not compilable")
message(STATUS "sem_open is compilable")
endif()
- exec_program("${CMAKE_BINARY_DIR}/testprog" RETURN_VALUE HAVE_SEM_OPEN_run OUTPUT_VARIABLE var_compil)
- file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
-
- if(NOT HAVE_SEM_OPEN_run)
- set(HAVE_SEM_OPEN 1)
- message(STATUS "sem_open is executable")
- else()
- set(HAVE_SEM_OPEN 0)
- message(STATUS "Warning: sem_open not executable")
+ # If we're not crosscompiling, we check by executing the program:
+ if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
+ execute_process(COMMAND ./sem_open
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ RESULT_VARIABLE HAVE_SEM_OPEN_run
+ OUTPUT_VARIABLE var_compil
+ )
+ if (NOT HAVE_SEM_OPEN_run)
+ set(HAVE_SEM_OPEN 1)
+ message(STATUS "sem_open is executable")
+ else()
+ set(HAVE_SEM_OPEN 0)
+ if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
+ message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
+ else()
+ message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
+ endif()
+ message(STATUS "Warning: sem_open not executable")
+ message(STATUS "Compilation output: '${var_compil}'")
+ message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
+ endif()
endif()
+ file(REMOVE sem_open)
else()
set(HAVE_SEM_OPEN 0)
endif()
if(HAVE_SEM_INIT_LIB)
- exec_program(
- "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_init.c -lpthread -o testprog"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_SEM_INIT_compil
- )
+ execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ RESULT_VARIABLE HAVE_SEM_INIT_run OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
+ # Test sem_init by compiling:
if(HAVE_SEM_INIT_compil)
set(HAVE_SEM_INIT 0)
message(STATUS "Warning: sem_init not compilable")
message(STATUS "sem_init is compilable")
endif()
- exec_program("${CMAKE_BINARY_DIR}/testprog" RETURN_VALUE HAVE_SEM_INIT_run OUTPUT_VARIABLE var_compil)
- file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
-
- if(NOT HAVE_SEM_INIT_run)
- set(HAVE_SEM_INIT 1)
- message(STATUS "sem_init is executable")
- else()
- set(HAVE_SEM_INIT 0)
- message(STATUS "Warning: sem_init not executable")
+ # If we're not crosscompiling, we check by executing the program:
+ if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
+ execute_process(COMMAND ./sem_init
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ RESULT_VARIABLE HAVE_SEM_INIT_run
+ OUTPUT_VARIABLE var_compil
+ )
+ if (NOT HAVE_SEM_INIT_run)
+ set(HAVE_SEM_INIT 1)
+ message(STATUS "sem_init is executable")
+ else()
+ set(HAVE_SEM_INIT 0)
+ if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
+ message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
+ else()
+ message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
+ endif()
+ message(STATUS "Warning: sem_init not executable")
+ message(STATUS "Compilation output: '${var_compil}'")
+ message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
+ endif()
endif()
+ file(REMOVE sem_init)
endif()
if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
endif()
endif()
-# AC_CHECK_MCSC(mcsc=yes, mcsc=no)
-set(mcsc_flags "")
+# This is needed for ucontext on MacOS X:
if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
- set(mcsc_flags "-D_XOPEN_SOURCE")
+ add_definitions(-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE)
endif()
if(WIN32)
- if(ARCH_32_BITS)
- set(mcsc_flags "-D_XBT_WIN32 -D_I_X86_ -I${CMAKE_HOME_DIRECTORY}/include/xbt -I${CMAKE_HOME_DIRECTORY}/src/xbt")
- else()
- set(mcsc_flags "-D_XBT_WIN32 -D_AMD64_ -I${CMAKE_HOME_DIRECTORY}/include/xbt -I${CMAKE_HOME_DIRECTORY}/src/xbt")
- endif()
-endif()
-
-IF(CMAKE_CROSSCOMPILING)
- IF(WIN32)
- set(windows_context "yes")
- set(IS_WINDOWS 1)
- ENDIF()
-ELSE()
- file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
- file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
- exec_program(
- "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_AC_CHECK_MCSC.c ${mcsc_flags} -o testprog"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/
- OUTPUT_VARIABLE COMPILE_mcsc_VAR)
-
- if(NOT COMPILE_mcsc_VAR)
- message(STATUS "prog_AC_CHECK_MCSC.c is compilable")
- exec_program("${CMAKE_BINARY_DIR}/testprog" OUTPUT_VARIABLE var_compil)
- else()
- message(STATUS "prog_AC_CHECK_MCSC.c is not compilable")
- endif()
- file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
-
- if(EXISTS "${CMAKE_BINARY_DIR}/conftestval")
- file(READ "${CMAKE_BINARY_DIR}/conftestval" mcsc)
- STRING(REPLACE "\n" "" mcsc "${mcsc}")
- if(mcsc)
- set(mcsc "yes")
- set(HAVE_UCONTEXT_H 1)
- else()
- set(mcsc "no")
- endif()
- else()
- set(mcsc "no")
- endif()
-
- message(STATUS "mcsc: ${mcsc}")
-ENDIF()
-
-if(mcsc MATCHES "no" AND pthread)
- if(HAVE_WINDOWS_H)
- set(windows_context "yes")
- set(IS_WINDOWS 1)
- elseif(HAVE_WINDOWS_H)
- message(FATAL_ERROR "no appropriate backend found")
- endif()
-endif()
-
-#Only windows
-
-if(WIN32)
- if(NOT HAVE_WINDOWS_H)
- message(FATAL_ERROR "no appropriate backend found windows")
- endif()
-endif()
-
-if(windows_context MATCHES "yes")
- message(STATUS "Context change to windows")
+ # We always provide our own implementation of ucontext on Windows.
+ try_compile(HAVE_UCONTEXT
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_AC_CHECK_MCSC.c
+ COMPILE_DEFINITIONS _XBT_WIN32
+ INCLUDE_DIRECTORIES
+ ${CMAKE_HOME_DIRECTORY}/src/include
+ ${CMAKE_HOME_DIRECTORY}/src/xbt
+ )
+else()
+ # We always provide our own implementation of ucontext on Windows.
+ try_compile(HAVE_UCONTEXT
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_AC_CHECK_MCSC.c)
endif()
#If can have both context
-if(mcsc)
+if(HAVE_UCONTEXT)
set(CONTEXT_UCONTEXT 1)
+ message("-- Support for ucontext factory")
endif()
if(pthread)
set(CONTEXT_THREADS 1)
+ message("-- Support for thread context factory")
endif()
###############
## GIT version check
##
-if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/ AND NOT WIN32)
- exec_program("git remote | head -n 1" OUTPUT_VARIABLE remote RETURN_VALUE ret)
- exec_program("git config --get remote.${remote}.url" OUTPUT_VARIABLE url RETURN_VALUE ret)
-
+if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
+ execute_process(COMMAND git remote
+ COMMAND head -n 1
+ WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
+ OUTPUT_VARIABLE remote
+ RESULT_VARIABLE ret
+ )
+ string(REPLACE "\n" "" remote "${remote}")
+ #message(STATUS "Git remote: ${remote}")
+ execute_process(COMMAND git config --get remote.${remote}.url
+ WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
+ OUTPUT_VARIABLE url
+ RESULT_VARIABLE ret
+ )
+ string(REPLACE "\n" "" url "${url}")
+ #message(STATUS "Git url: ${url}")
if(url)
- exec_program("git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --oneline -1" OUTPUT_VARIABLE "GIT_VERSION")
+ execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
+ WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
+ OUTPUT_VARIABLE GIT_VERSION
+ RESULT_VARIABLE ret
+ )
+ string(REPLACE "\n" "" GIT_VERSION "${GIT_VERSION}")
message(STATUS "Git version: ${GIT_VERSION}")
- exec_program("git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --format=%ai ." OUTPUT_VARIABLE "GIT_DATE")
+ execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
+ WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
+ OUTPUT_VARIABLE GIT_DATE
+ RESULT_VARIABLE ret
+ )
+ string(REPLACE "\n" "" GIT_DATE "${GIT_DATE}")
message(STATUS "Git date: ${GIT_DATE}")
string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
- STRING(REPLACE " +0000" "" GIT_DATE ${GIT_DATE})
- STRING(REPLACE " " "~" GIT_DATE ${GIT_DATE})
- STRING(REPLACE ":" "-" GIT_DATE ${GIT_DATE})
+
+ execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
+ WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
+ OUTPUT_VARIABLE SIMGRID_GITHASH
+ RESULT_VARIABLE ret
+ )
+ string(REPLACE "\n" "" SIMGRID_GITHASH "${SIMGRID_GITHASH}")
+
endif()
+elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
+ FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
endif()
-###################################
-## SimGrid and GRAS specific checks
-##
-
-IF(NOT CMAKE_CROSSCOMPILING)
- # Check architecture signature begin
- try_run(RUN_GRAS_VAR COMPILE_GRAS_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_GRAS_ARCH.c
- RUN_OUTPUT_VARIABLE var1
- )
- if(BIGENDIAN)
- set(val_big "B${var1}")
- set(GRAS_BIGENDIAN 1)
- else()
- set(val_big "l${var1}")
- set(GRAS_BIGENDIAN 0)
- endif()
-
- # The syntax of this magic string is given in src/xbt/datadesc/ddt_convert.c
- # It kinda matches the values that the xbt_arch_desc_t structure can take
-
- # Basically, the syntax is one char l or B for endianness (little or Big)
- # then there is a bunch of blocks separated by _.
- # C block is for char, I block for integers, P block for pointers and
- # D block for floating points
- # For each block there is an amount of chuncks separated by :, each of
- # them describing a data size. For example there is only one chunk
- # in the char block, because no architecture provide several sizes
- # of chars. In integer block, there is 4 chunks: "short int", "int",
- # "long int", "long long int". There is 2 pointer chunks for data
- # pointers and pointers on functions (thanks to the AMD64 madness).
- # Thee two floating points chuncks are for "float" and "double".
- # Each chunk is of the form datasize/minimal_alignment_size
-
- # These informations are used to convert a data stream from one
- # formalism to another. Only the GRAS_ARCH is transfered in the
- # stream, and it it of cruxial importance to keep these detection
- # information here synchronized with the data hardcoded in the
- # source in src/xbt/datadesc/ddt_convert.c
-
- # If you add something here (like a previously unknown architecture),
- # please add it to the source code too.
- # Please do not modify stuff here since it'd break the GRAS protocol.
- # If you really need to change stuff, please also bump
- # GRAS_PROTOCOL_VERSION in src/gras/Msg/msg_interface.h
-
- SET(GRAS_THISARCH "none")
-
- if(val_big MATCHES "l_C:1/1:_I:2/1:4/1:4/1:8/1:_P:4/1:4/1:_D:4/1:8/1:")
- #gras_arch=0; gras_size=32; gras_arch_name=little32_1;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 0)
- endif()
- if(val_big MATCHES "l_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
- #gras_arch=1; gras_size=32; gras_arch_name=little32_2;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 1)
- endif()
- if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
- #gras_arch=2; gras_size=32; gras_arch_name=little32_4;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 2)
- endif()
- if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
- #gras_arch=3; gras_size=32; gras_arch_name=little32_8;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 3)
- endif()
- if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
- #gras_arch=4; gras_size=64; gras_arch_name=little64;
- SET(GRAS_ARCH_32_BITS 0)
- SET(GRAS_THISARCH 4)
- endif()
- if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:8/8:8/8:_D:4/4:8/8:")
- #gras_arch=5; gras_size=64; gras_arch_name=little64_2;
- SET(GRAS_ARCH_32_BITS 0)
- SET(GRAS_THISARCH 5)
- endif()
-
- if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
- #gras_arch=6; gras_size=32; gras_arch_name=big32_8;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 6)
- endif()
- if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/4:")
- #gras_arch=7; gras_size=32; gras_arch_name=big32_8_4;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 7)
- endif()
- if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
- #gras_arch=8; gras_size=32; gras_arch_name=big32_4;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 8)
- endif()
- if(val_big MATCHES "B_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
- #gras_arch=9; gras_size=32; gras_arch_name=big32_2;
- SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 9)
- endif()
- if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
- #gras_arch=10; gras_size=64; gras_arch_name=big64;
- SET(GRAS_ARCH_32_BITS 0)
- SET(GRAS_THISARCH 10)
- endif()
- if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/4:")
- #gras_arch=11; gras_size=64; gras_arch_name=big64_8_4;
- SET(GRAS_ARCH_32_BITS 0)
- SET(GRAS_THISARCH 11)
- endif()
-
- if(GRAS_THISARCH MATCHES "none")
- message(STATUS "architecture: ${val_big}")
- message(FATAL_ERROR "GRAS_THISARCH is empty: '${GRAS_THISARCH}'")
- endif()
-
- # Check architecture signature end
- try_run(RUN_GRAS_VAR COMPILE_GRAS_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_GRAS_CHECK_STRUCT_COMPACTION.c
- RUN_OUTPUT_VARIABLE var2
- )
- separate_arguments(var2)
- foreach(var_tmp ${var2})
- set(${var_tmp} 1)
- endforeach(var_tmp ${var2})
-
- # Check for [SIZEOF_MAX]
- try_run(RUN_SM_VAR COMPILE_SM_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_max_size.c
- RUN_OUTPUT_VARIABLE var3
- )
- message(STATUS "SIZEOF_MAX ${var3}")
- SET(SIZEOF_MAX ${var3})
-ENDIF()
-
+if(release)
+ set(SIMGRID_VERSION_STRING "${SIMGRID_VERSION_STRING}\\nRelease build")
+else()
+ set(SIMGRID_VERSION_STRING "${SIMGRID_VERSION_STRING}\\nDevelopment build")
+endif()
+if(GIT_VERSION)
+ set(SIMGRID_VERSION_STRING "${SIMGRID_VERSION_STRING} at commit ${GIT_VERSION}")
+endif()
+if(GIT_DATE)
+ set(SIMGRID_VERSION_STRING "${SIMGRID_VERSION_STRING} (${GIT_DATE})")
+endif()
#--------------------------------------------------------------------------------------------------
set(makecontext_CPPFLAGS_2 "")
if(HAVE_MAKECONTEXT OR WIN32)
set(makecontext_CPPFLAGS "-DTEST_makecontext")
if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
- set(makecontext_CPPFLAGS_2 "-D_XOPEN_SOURCE")
+ set(makecontext_CPPFLAGS_2 "-D_XOPEN_SOURCE=700")
endif()
if(WIN32)
else()
set(makecontext_CPPFLAGS "-DTEST_makecontext -D_AMD64_")
endif()
- set(makecontext_CPPFLAGS_2 "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/include/xbt -I${CMAKE_HOME_DIRECTORY}/src/xbt")
+ set(makecontext_CPPFLAGS_2 "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/src/include -I${CMAKE_HOME_DIRECTORY}/src/xbt")
endif()
file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
- try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_stacksetup.c
- COMPILE_DEFINITIONS "${makecontext_CPPFLAGS} ${makecontext_CPPFLAGS_2}"
- )
+ if(CMAKE_CROSSCOMPILING)
+ set(RUN_makecontext_VAR "cross")
+ set(COMPILE_makecontext_VAR "cross")
+ else()
+ try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_stacksetup.c
+ COMPILE_DEFINITIONS "${makecontext_CPPFLAGS} ${makecontext_CPPFLAGS_2}"
+ )
+ endif()
if(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
file(READ ${CMAKE_BINARY_DIR}/conftestval MAKECONTEXT_ADDR_SIZE)
message(STATUS "${pth_skaddr_makecontext}")
message(STATUS "${pth_sksize_makecontext}")
else()
- # message(FATAL_ERROR "makecontext is not compilable")
+ # message(FATAL_ERROR "makecontext is not compilable")
endif()
endif()
try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_stackgrowth.c
+ RUN_OUTPUT_VARIABLE stack
)
- file(READ "${CMAKE_BINARY_DIR}/conftestval" stack)
- if(stack MATCHES "down")
+endif()
+if("${stack}" STREQUAL "down")
+ set(PTH_STACKGROWTH "-1")
+elseif("${stack}" STREQUAL "up")
+ set(PTH_STACKGROWTH "1")
+else()
+ if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
set(PTH_STACKGROWTH "-1")
+ elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
+ set(PTH_STACKGROWTH "-1")
+ else()
+ message(ERROR "Could not figure the stack direction.")
endif()
- if(stack MATCHES "up")
- set(PTH_STACKGROWTH "1")
- endif()
-
endif()
+
###############
## System checks
##
#AC_PROG_MAKE_SET
-#AC_PRINTF_NULL
-try_run(RUN_PRINTF_NULL_VAR COMPILE_PRINTF_NULL_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_printf_null.c
- )
-
-if(RUN_PRINTF_NULL_VAR MATCHES "FAILED_TO_RUN")
- SET(PRINTF_NULL_WORKING "0")
-else()
- SET(PRINTF_NULL_WORKING "1")
-endif()
-
#AC_CHECK_VA_COPY
set(diff_va "va_copy((d),(s))"
foreach(fct ${diff_va})
write_file("${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_va_copy.c" "#include <stdlib.h>
- #include <stdarg.h>
- #include <string.h>
- #define DO_VA_COPY(d,s) ${fct}
- void test(char *str, ...)
- {
- va_list ap, ap2;
- int i;
- va_start(ap, str);
- DO_VA_COPY(ap2, ap);
- for (i = 1; i <= 9; i++) {
- int k = (int)va_arg(ap, int);
- if (k != i)
- abort();
- }
- DO_VA_COPY(ap, ap2);
- for (i = 1; i <= 9; i++) {
- int k = (int)va_arg(ap, int);
- if (k != i)
- abort();
- }
- va_end(ap);
- }
- int main(void)
- {
- test(\"test\", 1, 2, 3, 4, 5, 6, 7, 8, 9);
- exit(0);
- }"
- )
- try_compile(COMPILE_VA_NULL_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_va_copy.c
+#include <stdarg.h>
+#include <string.h>
+#define DO_VA_COPY(d,s) ${fct}
+void test(char *str, ...)
+{
+ va_list ap, ap2;
+ int i;
+ va_start(ap, str);
+ DO_VA_COPY(ap2, ap);
+ for (i = 1; i <= 9; i++) {
+ int k = (int)va_arg(ap, int);
+ if (k != i)
+ abort();
+ }
+ DO_VA_COPY(ap, ap2);
+ for (i = 1; i <= 9; i++) {
+ int k = (int)va_arg(ap, int);
+ if (k != i)
+ abort();
+ }
+ va_end(ap);
+}
+int main(void)
+{
+ test(\"test\", 1, 2, 3, 4, 5, 6, 7, 8, 9);
+ exit(0);
+}"
)
- if(COMPILE_VA_NULL_VAR)
+
+ execute_process(
+ COMMAND ${CMAKE_C_COMPILER} "${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_va_copy.c"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ RESULT_VARIABLE COMPILE_VA_NULL_VAR
+ OUTPUT_QUIET
+ ERROR_QUIET
+ )
+
+ if(NOT COMPILE_VA_NULL_VAR)
string(REGEX REPLACE "\;" "" fctbis ${fct})
if(${fctbis} STREQUAL "va_copy((d),(s))")
set(HAVE_VA_COPY 1)
endforeach(fct ${diff_va})
#--------------------------------------------------------------------------------------------------
-### check for getline
-try_compile(COMPILE_RESULT_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_getline.c
- )
-
-if(NOT COMPILE_RESULT_VAR)
- SET(need_getline "#define SIMGRID_NEED_GETLINE 1")
- SET(SIMGRID_NEED_GETLINE 1)
-else()
- SET(need_getline "")
- SET(SIMGRID_NEED_GETLINE 0)
-endif()
-
### check for a working snprintf
if(HAVE_SNPRINTF AND HAVE_VSNPRINTF OR WIN32)
if(WIN32)
### File to create
-configure_file("${CMAKE_HOME_DIRECTORY}/src/context_sysv_config.h.in" "${CMAKE_BINARY_DIR}/src/context_sysv_config.h" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/src/context_sysv_config.h.in"
+ "${CMAKE_BINARY_DIR}/src/context_sysv_config.h" @ONLY IMMEDIATE)
SET( CMAKEDEFINE "#cmakedefine" )
-configure_file("${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/src/gras_config.h.in" "${CMAKE_BINARY_DIR}/src/gras_config.h" @ONLY IMMEDIATE)
-configure_file("${CMAKE_BINARY_DIR}/src/gras_config.h" "${CMAKE_BINARY_DIR}/src/gras_config.h" @ONLY IMMEDIATE)
-configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
+configure_file("${CMAKE_BINARY_DIR}/src/internal_config.h" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h" @ONLY IMMEDIATE)
set(top_srcdir "${CMAKE_HOME_DIRECTORY}")
set(srcdir "${CMAKE_HOME_DIRECTORY}/src")
+set(bindir "${CMAKE_BINARY_DIR}")
+### Script used when simgrid is installed
set(exec_prefix ${CMAKE_INSTALL_PREFIX})
-set(includedir ${CMAKE_INSTALL_PREFIX}/include)
-set(top_builddir ${CMAKE_HOME_DIRECTORY})
+set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
+set(includedir "${CMAKE_INSTALL_PREFIX}/include")
set(libdir ${exec_prefix}/lib)
-set(CMAKE_LINKARGS "${CMAKE_BINARY_DIR}/lib")
-set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=${CMAKE_BINARY_DIR}/lib:${GTNETS_LIB_PATH}:${HAVE_NS3_LIB}:$LD_LIBRARY_PATH")
+set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
+if(GTNETS_LIB_PATH)
+ set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${GTNETS_LIB_PATH}")
+endif()
+if(HAVE_NS3_LIB)
+ set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${HAVE_NS3_LIB}")
+endif()
+set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/smpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/smpif.h @ONLY)
+file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH)
+configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/bin/smpicc @ONLY)
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif2c.in ${CMAKE_BINARY_DIR}/bin/smpif2c @ONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/bin/smpicxx @ONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/bin/smpiff @ONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/bin/smpif90 @ONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/bin/smpirun @ONLY)
+### Script used when simgrid is compiling
+set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
+set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
+set(includedir "${CMAKE_HOME_DIRECTORY}/include")
+set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
+set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
+if(GTNETS_LIB_PATH)
+ set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${GTNETS_LIB_PATH}")
+endif()
+if(HAVE_NS3_LIB)
+ set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${HAVE_NS3_LIB}")
+endif()
+set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
+set(libdir "${CMAKE_BINARY_DIR}/lib")
+
+configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc @ONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx @ONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff @ONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90 @ONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun @ONLY)
+
+set(top_builddir ${CMAKE_HOME_DIRECTORY})
+
if(NOT WIN32)
- exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicc" OUTPUT_VARIABLE OKITOKI)
- exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpif2c" OUTPUT_VARIABLE OKITOKI)
- exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpiff" OUTPUT_VARIABLE OKITOKI)
- exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpirun" OUTPUT_VARIABLE OKITOKI)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicc)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicxx)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpiff)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpif90)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpirun)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun)
endif()
set(generated_headers_to_install
- ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/smpif.h
+ ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
)
set(generated_headers
${CMAKE_CURRENT_BINARY_DIR}/src/context_sysv_config.h
- ${CMAKE_CURRENT_BINARY_DIR}/src/gras_config.h
+ ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h
)
set(generated_files_to_clean
${generated_headers}
${generated_headers_to_install}
${CMAKE_BINARY_DIR}/bin/smpicc
- ${CMAKE_BINARY_DIR}/bin/smpif2c
+ ${CMAKE_BINARY_DIR}/bin/smpicxx
${CMAKE_BINARY_DIR}/bin/smpiff
+ ${CMAKE_BINARY_DIR}/bin/smpif90
${CMAKE_BINARY_DIR}/bin/smpirun
${CMAKE_BINARY_DIR}/bin/colorize
${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
- ${CMAKE_BINARY_DIR}/src/supernovae_sg.c
- ${CMAKE_BINARY_DIR}/src/supernovae_gras.c
- ${CMAKE_BINARY_DIR}/src/supernovae_smpi.c
)
-if("${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
-else()
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/hostfile ${CMAKE_BINARY_DIR}/examples/smpi/hostfile COPYONLY)
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/small_platform.xml ${CMAKE_BINARY_DIR}/examples/msg/small_platform.xml COPYONLY)
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/small_platform_with_routers.xml ${CMAKE_BINARY_DIR}/examples/msg/small_platform_with_routers.xml COPYONLY)
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/tracing/platform.xml ${CMAKE_BINARY_DIR}/examples/msg/tracing/platform.xml COPYONLY)
+if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
+
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
set(generated_files_to_clean
${generated_files_to_clean}
- ${CMAKE_BINARY_DIR}/examples/smpi/hostfile
- ${CMAKE_BINARY_DIR}/examples/msg/small_platform.xml
- ${CMAKE_BINARY_DIR}/examples/msg/small_platform_with_routers.xml
- ${CMAKE_BINARY_DIR}/examples/msg/tracing/platform.xml
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
)
endif()
ELSE()
set(WIN_ARCH "64")
ENDIF()
-configure_file("${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/src/simgrid.nsi.in" "${CMAKE_BINARY_DIR}/simgrid.nsi" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/src/simgrid.nsi.in" "${CMAKE_BINARY_DIR}/simgrid.nsi" @ONLY IMMEDIATE)
