+ GRAS:
+ * New function: gras_msgtype_get_name()
+
+ Build chain: bug fixes and further polishing
+ * Fix the 'make install' target.
+ No need to use 'make install-simgrid' anymore
+ * Introduce a 'make dist' target compiling a *source* archive
+ 'make package' compiles a binary archive (not well tested)
+ * Compile java files only on need
+
+ Tracing:
+ * Tracing system
+ - tracing API for MSG changes: TRACE_start has no
+ longer parameters, the trace file is supplied through
+ an option passed to simulator. Categories declaration
+ and utilization remain the same. The following options
+ are supported:
+ --cfg=tracing/filename:msg.trace
+ --cfg=tracing/platform:1 (categorized resource use)
+ --cfg=tracing/msg/task:1 (task creation)
+ --cfg=tracing/msg/process:1 (process creation, migration)
+ --cfg=tracing/msg/volume:1 (volume of msg send/recv)
+ --cfg=tracing/smpi:1 (smpi interface tracing)
+ - examples of examples/msg/tracing updated
+
+ * Tracing the MPI interface implemented by SMPI
+ - Collective operations are traced with states
+ - Point-to-Point operations are traced with states/links
+ - Tracing activated by a parameter "-trace filename" passed
+ to smpirun during execution (considering that simgrid
+ is compiled with tracing enabled)
+ - To run the simulation with gdb, the simulator
+ accepts --cfg=tracing/smpi:1 to trace SMPI
+ - tesh files to check if smpi tracing is ok
+
+ * GTNetS tracing re-worked
+ - adaptation to the tracing system of GTNets to cope
+ with modifications regarding the fullduplex mode
+ - new tesh files to check if gtnets tracing is ok
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
+
+SimGrid (3.4.1) stable; urgency=low
+
+ The "Polishing easter eggs is probably a good idea" release.
+ This is a bug fixes release only.
+
+
+ Java Bindings
+ * Fix a bug preventing the tasks from begin garbage collected.
+
+ MSG
+ * Fix a bug occuring when a host involved in a communication fails.
+ This was not detected properly by the other peer involved in the
+ communication. Now, it's reported as a network error.
+
+ SimDag
+ * Warn the user about loop dependencies in data flow of DAX files
+ * Obey the control-flow dependencies of DAX files
+
+ Cmake
+ * Add option "enable_smpi" allowing to not compile SMPI.
+ Probably useful for the (Mac) users experiencing a build error here
+ * Improve the detection of lua5.1 and ruby1.8
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Tus, 04 May 2010 28 16:11:16 +0100
+
+SimGrid (3.4) stable; urgency=low
+
+ The "Easter in Cargese" release. Also known as (major changes):
+
+ * the "se habla Java, Ruby 話せます, fala-se Lua (and deaf-friendly)"
+ ~> bindings were greatly improved
+ ~> new tracing infrastructure for better visualization introduced
+
+ * the "Welcome to configury modernity" release.
+ ~> we switched from autotools to cmake, and improved our cdash
+
+
+ A more detailled list of changes follow (full detail in svn log).
+
+ Java Bindings: Various Cleanups
+ * (install java-gcj-compat-dev on debian-like to use them)
+ * Remove put/get: no need to export deprecated interface in Java
+ Use send/receive instead.
+ * Cleanup the examples and add a README per directory
+ * Remove example autoDestination (that's the only way to go now)
+ * Remove example explicitDestination (was a plain copy of basic)
+ * Make JniException a runtime exception, so that there is no need to
+ declare the fact that you may encounter such a beast. I guess that
+ nobody will ever want to survive such error.
+ * Create specific errors for each MSG case of failure:
+ host failure, transfer failure, timeout, task cancelled
+ * Cleanup the exceptions that may get thrown by each function
+ * Other internal cleanups in Java bindings. Performance still bad :/
+ Ruby and Lua Bindings: create them
+ * (install ruby1.8-dev/liblua5.1-0-dev on debian-like to use them)
+ * That's new and great, you should try them out.
+ Same functionalities than Java bindings, only even less polished
+ SimDag:
+ * Kill the useless "rate" argument of SD_task_get_execution_time()
+ Everyone used to provide -1 as a value, it was not used, and the
+ semantic of a possible use wasn't even clear.
+ * SD_SCHED_NO_COST: Constant to use as cost in SD_task_schedule()
+ either as comm costs or compute costs to mean that there is no
+ such thing for that specific task.
+ * Add a SD_task_set_name() function
+ * Fix SD_task_unschedule() on typed tasks
+ * Fix SD_task_get_execution_time() to return seconds, not flop*sec
+ * In DAX loader, accept useless 'level' attributes to <job> since
+ LIGO DAGs have them (seem to be to ease graphical representation).
+ MSG:
+ * Add an example masterslave_mailbox.c using send/receive and not
+ the deprecated put/get interface.
+ * Kill the MSG_paje_output() function. It's a noop since 2 years.
+ * Kill MSG_WARNING and MSG_FATAL return codes: they were not used
+ anywere in source.
+ * Rename MSG_TIMEOUT_FAILURE into MSG_TIMEOUT for sake of logic
+ (declare MSG_USE_DEPRECATED to still have the old name)
+ * Add a MSG_task_set_data() function
+ * About trace replay (see examples/msg/actions):
+ - implement barrier
+ - Allow to work with splitted trace files for each process
+ Give the specific trace file as argument of each process,
+ and call MSG_action_trace_run(NULL)
+ You can still have one merged file for all processes.
+ - Fix implementation of collective operations
+ * Allow task_execute() on 0-sized tasks (closes #10063)
+ SMPI:
+ * This is the first release of SimGrid where SMPI is not considered
+ beta anymore (even if some corners should still be improved)
+ * Port over the new SIMIX_network submodule (internal refactoring)
+ * Basic support to log events as with SMPE (use --cfg=SMPE:1)
+ * Implement more missing elements of the standard:
+ - MPI_COMM_SELF
+ - MPI_MAXLOC MPI_MINLOC + all associated datatype MPI_DOUBLE_INT,
+ MPI_FLOAT_INT, etc.
+ - MPI_Address() MPI_Get_count() MPI_Type_free() MPI_Type_extent()
+ MPI_Scan() MPI_Get_processor_name()
+ - Added implementation of missing case for Alltoall (warning: it's
+ *not* the bruck variant from OpenMPI; based on Alltoallv instead)
+ - SMPI_MPI_Gather() SMPI_MPI_Gatherv() SMPI_MPI_Scatterv()
+ SMPI_MPI_Reduce_scatter() SMPI_MPI_Allgather()
+ SMPI_MPI_Allgatherv()
+ * Bug fixes include:
+ - MPI_Waitsome() was broken
+ - Allow relative includes in smpicc
+ - Command line cfg argument 'reference_speed' was ignored...
+ - Some functions did not properly lead to auto-benching of user code
+ - smpicc passes -O2 by default (just like openmpi one)
+ SIMIX:
+ * add SIMIX_action_suspend() and SIMIX_action_resume() functions
+ * Bug fixes about timeouts during communications
+ * add SIMIX_message_sizes_output() as a pimple to write to file the
+ amount of messages per size. Use gnuplot to get histogram.
+ Pimple because that's the only user-visible function of simix,
+ defined directly in xbt.h (irk, sorry)
+ * About semaphores:
+ - Add a SIMIX_sem_get_capacity() function
+ - Fix interactions with processe resume/suspende
+ - release_forever() was stupidly broken
+ - Fix SIMIX_display_process_status() for processes in a semaphore
+ - Make SIMIX_sem_block_onto() user-visible
+ * Refactoring context stuff:
+ - Use pseudo-OOP for better modularity
+ - reimplement SIMIX_process_kill() without process_schedule() so
+ that the latter can take as invariant that it is called from
+ maestro.
+ - Merge context_start into context_new for sake of simplicity
+ SURF:
+ * Add a Vivaldi network model, coded live during SUD'10 ;)
+ * Rename configuration variables to start a hierarchy:
+ o cpu_model -> cpu/model
+ o network_model -> network/model
+ o workstation_model -> workstation/model
+ * New configuration variables:
+ o network/bandwidth_factor: correction to bandwith
+ o network/latency_factor: correction to latency
+ o netwotk/weight_S: correction to the weight of competing streams
+ * Add a long description to the models, that users can see with such
+ argument on the command line: --cfg=cpu/model:help
+ * --help-models display the long description of all known models
+ XBT:
+ * config: add the ability to set a default value after registration
+ Does not override any previously set value (e.g. from cmd line)
+ * dict: allow to have integer key and data.
+ When so, you need to use the following functions
+ void xbt_dicti_set(xbt_dict_t dict, uintptr_t key, uintptr_t data);
+ uintptr_t xbt_dicti_get(xbt_dict_t dict, uintptr_t key);
+ void xbt_dicti_remove(xbt_dict_t dict, uintptr_t key);
+ In contrary to regular dicts, the key is not malloced before copy.
+ Mixing scalar and regular elements in the same dict is not tested
+ (but may work).
+ * Allow to use xbt_dynar_shrink() to expend the dynar instead
+ Tracing for Visualization:
+ * SimGrid is now instrumented in order to generate a trace file for
+ visualization analysis: to use it, need to compile SimGrid with the
+ "tracing" option enabled, and instrument the program using SimGrid with
+ TRACE_start, TRACE_category, TRACE_msg_set_task_category and TRACE_end
+ (among other functions).
+ * The instrumentation only traces the platform utilization for now
+ * Documentation to use the tracing functions and how to analyze the
+ traces with the Triva tool is written.
+ * More information about: SimGrid FAQ (in the section Tracing Simulations
+ for Visualization)
+ Build system:
+ * We moved to cmake as default build system. Autotools support will
+ be dropped soon. Check the FAQ for more info about how to use it.
+ * Greatly improved our cdash/ctest interactions
+ Check http://cdash.inria.fr/CDash/index.php?project=Simgrid
+ * Added memory checking tests with valgrind; lot of memleak fixing.
+ This may be the first release of simgrid with so few memory issues
+ * Added code coverage tests.
+ Our coverage is still improvable, but at least we see it on cdash.
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Wed, 28 Apr 2010 28 17:11:16 +0100
+
+SimGrid (3.3.4) stable; urgency=low
+
+ The "Desktop Grid needs love too" release (also called Xmas release).
+
+ Models improvements:
+ * Major speedup in the maxmin system solving by using lazy evaluation
+ Instead of solving completely the maxmin system at each iteration,
+ only invalidate (and recompute) the modified parts.
+ This new feature is enabled in default models but you can try to
+ turn it on with "--cfg:maxmin-selective-update=1" for other models.
+ * Cas01 IMproved as default CPU model
+ This CPU model is the same Cas01 model, but it uses the
+ maxmin-selective-update flag and a heap structure to manage
+ actions on SURF kernel.
+ It reduces the complexity to find the next action to finish and,
+ consequently, it's faster than the old Cas01.
+ This is the new default CPU model (Cas01).
+ * Rename the old Cas01 model to Cas01_fullupdate
+ Keep the old cpu model Cas01 with the new name of Cas01_fullupdate.
+ Use "--cfg=cpu_model:Cas01_fullupdate" to use the old default CPU model.
+ * CpuTI (CPU Trace Integration)
+ A new CPU model whose objective is simulate faster when using
+ availability trace files.
+ Instead of using a full featured, over engineered maxmin system for
+ CPU modeling, this model does the pre-integration of traces files
+ to calculate the amount of CPU power available, and so, executes
+ faster than the old CPU models.
+ Use "--cfg=cpu_model:CpuTI" to change to this CPU model.
+ * Use LV08 as default network model since it gives better accuracy
+ for small messages and shouldn't change things for big ones.
+ Use --cfg=network_model:CM02 to get the previous behavior.
+
+
+ ******************************************
+ *DO NOT MIX 3.3.4 RESULTS WITH OLDER ONES*
+ ******************************************
+ * The new CPU model may changes simulations!
+ The point is that events occurring at the exact same timestamp
+ are not scheduled in the same order with the old and new
+ version. This may be enough to completely change the execution
+ of simulations in some cases.
+ * The new network model will change simulations!
+ This new model is more realistic than the previous one, so you
+ should consider redoing your old experiments with this model.
+ Sorry for the inconvenience.
+
+ Build System:
+ * Introduce the supernovae compilation mode
+ When compiled that way, the whole SimGrid (or almost) is put in a
+ single compilation unit and compiled in one shoot.
+ This is to help gcc which has difficulties to inline stuff from one
+ file into another.
+ The speedup seem to be above 15%, althrough more tests are needed on
+ amd64 to confirm that gain.
+
+ MSG:
+ * Port of MSG's mailbox on top of SIMIX network
+ The put/get mechanism was greatly simplified on the way.
+
+ SIMIX:
+ * New SIMIX network module. Provides:
+ - Mailbox: rendez-vous mecanism to find with who you want to speak
+ - Synchronous send/recv: easier and hopefully faster since the
+ logic is handled in the maestro process directly now
+ - Asynchronous send/recv: you dreamt of it? It's here now
+ Too bad that nobody cared enough to propagate the change to MSG.
+ * Add semaphores as SIMIX synchronization mechanism.
+
+ SimDag:
+ * new function SD_daxload(char*) to load a DAX file
+ (see http://vtcpc.isi.edu/pegasus/index.php/WorkflowGenerator)
+ * Introduce typed tasks. Specify its kind and cost at creation.
+ At scheduling, just give where it should be placed, and the cost
+ for each involved resource is automatically computed.
+ Existing constructors so far (more to come of course):
+ - SD_task_create_comm_e2e() for end-to-end communication
+ - SD_task_create_comp_seq() for sequential computation
+ Use SD_task_schedulev() / SD_task_schedulel() to schedule them.
+ * new function SD_task_dump() for debuging display
+ * new function SD_task_dotty(task,FILE*) writing to file the info
+ about the task in dotty format
+ * SD_task_dependency_exists() can now cope with having one of its
+ arguments NULL. If so, it tests whether the other argument has any
+ dependency.
+ * Add getters on list of preceding/following tasks:
+ SD_task_get_parents(task) and SD_task_get_children(task)
+ * Add getters on amount of workstations and list:
+ SD_task_get_workstation_count(t) and SD_task_get_workstation_list(t)
+ * Add getter on task kind: SD_task_get_kind(task)
+ * Update the start_time and finish_time of tasks on completion/failure
+ * Bugfix: Remove task from state swags when destroyed
+
+ GRAS:
+ * New function: void gras_cpu_burn(double flops) -- a simple CPU burner
+
+ XBT:
+ * New function: xbt_dynar_dopar(dynar,fun) to map a function over the
+ dynar with one separate thread per value of the dynar.
+ * Change the prototype of xbt_thread_create(), sorry.
+ Added a boolean parameter indicating whether we want to join this
+ thread (used in SG only for now)
+ * Implement xbt_thread_join and xbt_thread_yield in SG also.
+
+ Bug fixes:
+ * GTNetS wrappers should now be usable again (and betterly tested too)
+ * Fix a major regression from 3.2 where the timeout provided to
+ MSG_task_put_with_timeout() was used as absolute time before which
+ the comm should be done.
+ * Start to fix the <cluster> tag.
+ - Internal links should be good now (beside of the loopback, which
+ use the private link instead)
+ - paths to the external world is still rather broken
+ - the <route:multi> tag is just broken. Actually that's brain-dead.
+ We need sth like <route:multi src="myCluster" dst="$*-${myCluster}">
+ to make it less stupid
+ ** Check your platform with teshsuite/simdag/platforms/flatifier **
+ * Fix a source-level compatibility glitch from 3.2: after defining
+ MSG_USE_DEPRECATED, you can use the old name
+ MSG_task_put_with_time_out() for MSG_task_put_with_timeout()
+ * Allow to compile from the SVN with automake 1.11
+ * Fix some problems when using the "start_time" tag in deployment XMLs.
+ * Fix #8569: XBT/synchro.h has redundant declarations
+ * Fix #8563: MSG return values and exceptions
+ Introduce a MSG_TIMEOUT_FAILURE return code and use it consistently.
+ * Integrate patch #8636: Obey DESTDIR when installing documentation.
+ Thanks to Robson Peixoto.
+ * Fix a vicious bug in dictionaries inducing that some elements were
+ not freed on xbt_dict_free()
+
+ Portability report of this version:
+ * Main portability targets:
+ - linux (ubuntu (804/810/910) /debian (4/5/testing) /fedora (core11))
+ on (amd64/i386/ia64)
+ - mac leopard on i386
+ Known problems: http://cdash.inria.fr/CDash/index.php?project=Simgrid
+ but nothing critical.
+ * Other platforms: windows, AIX and others were not tested for this release
+
+ Timing report of this version:
+ * Lazy evaluation brings arbitrary speedup (ie, speedup depending on
+ scenario parameters). From 8h to a few seconds in desktop grid settings.
+ * Supernovae brings about 25% speedup on i386.
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Thu, 24 Dec 2009 19:07:39 +0100
+
+SimGrid (3.3.3) stable; urgency=low
+
+ The "Need for Speed" release.
+
+ The timings done to validate the 3.3.2 were faulty.
+ Instead of being 5% faster, it was 15% slower (compared to 3.3.1).
+
+ The problem was a conversion from a manually handled vector to
+ xbt_dynar_t on the critical path.
+ xbt_dynar_foreach calls functions, inducing stack management crap.
+
+ We inlined these functions and xbt_dynar_foreach is now breath taking.
+ We also inlined xbt_swag_belong on the way.
+
+ Here are some approximate speedup measurements (on master/slaves
+ simulations lasting between 10s and 20s each):
+ 3.3.1 -> 3.3.2: about same performance
+ 3.3.2 -> 3.3.3: 40% speedup
+ 3.3.1 -> 3.3.3: 40% speedup
+ 3.3.1 with inline patch -> 3.3.3: 30% speedup
+
+ Our reading is that the refactoring which occurred in 3.3.2 made us
+ suffer much more from the xbt_dynar_foreach low performance, but
+ once we solved this, this refactoring proved to be very performance
+ effective. From the 40% speedup, somehow, 10% are due to the
+ inlining and 30% to the refactoring.
+
+ That's a pitty that gcc cannot inline functions placed in other files
+ alone. We have to choose between:
+ - break the encapsulation (by putting private data structures and
+ accessors in headers files to help gcc)
+ - live with low performance
+ - switch to a decent compiler such as icc (not quite possible).
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Thu, 20 Aug 2009 21:21:33 +0200
+
+SimGrid (3.3.2) stable; urgency=low
+
+ The "Simplicity does not preceed complexity, but follows it" release.
+
+ The main contributors of this release were (lexical order):
+ Silas De Munck, Stéphane Genaud, Martin Quinson, Cristian Rosa.
+
+ SURF:
+ * Extract the routing logic into its own object.
+ (was dupplicated in network.c and workstation_LV07.c;
+ Allows to implement other ways of storing that info)
+ => kill now useless network_card concept
+ - Use dynar to represent routes (instead of void** + int*)
+ - kill link_set (use surf_network_model->resource_set instead)
+ - Add a command-line option to choose the routing schema to use
+ - Add three new models:
+ * Floyd (shortest path computed at initialization)
+ * Dijikstra (shortest path recomputed all the time)
+ * Cached Dijikstra (shortest path computed on need)
+ All these models where contributed by Silas De Munck, and are
+ described in his ICCS09 paper.
+
+ * Simplify model declaration
+ (less redirections, less function to write when defining a model)
+ - Factorize stuff between models:
+ - model_init/exit
+ - Set of resources:
+ surf_model_resource_set(model)
+ surf_model_resource_by_name(model, name)
+ - Unify the types of models in s_surf_model_t (using an union)
+ - Embeed fields of common_public directly into s_surf_model_t
+ - Rename model methods:
+ action_free ~> action_unref
+ action_change_state ~> action_state_set
+ action_get_state ~> action_state_get
+ - Change model methods into functions :
+ (model)->common_public->action_use ~> surf_action_ref
+
+ * Implement a generic resource; use it as ancestor to specific ones
+ (allows to kill duplicated code in models)
+ Drawback: timer command don't need no name nor properties;
+ workstation_CLM03 don't need no properties
+ (but I guess we can live with those few bytes wasted)
+
+ * Improve the action object model
+ - implement a constructor avoiding dupplicated code about field
+ initialization in generic_action part.
+
+ * Kill the SDP model: it has an external dependency, is deprecated
+ in flavor of modern lmm models, and didn't compile since a while
+
+ SIMIX:
+ * Relocation of the context module from XBT to SIMIX.
+ (the context were decoupled from the simix processes, duplicating a lot of code)
+ => a lot of code was factorized
+ - less overhead is introduced during scheduling
+ - simpler API for the context factory
+ - the logic for process creation,destruction and manipulation was simplified
+ * Simplification of the s_smx_process_t data structure.
+ => accesing the simix level data associated to a process is faster now,
+ and the code is a lot more readable.
+
+ SMPI:
+ * Implement some more MPI primitives:
+ MPI_Bcast, MPI_Waitany, MPI_Waitall, MPI_Reduce, MPI_Allreduce, MPI_Scatter, MPI_Sendrecv, MPI_Alltoall
+ -implementation: Bcast: flat or 2-ary tree (default),
+ Barrier: 4-ary tree,
+ Reduce: flat tree
+ Allreduce: Reduce then Bcast
+ Alltoall: "basic_linear" if data per proc < 3Kb, "otherwise pairwise".
+ Not yet implemented: "Bruck" for data per proc < 200b and comm size > 12
+ Alltoallv: flat tree, like ompi
+ Scatter: flat tree
+ * Add support for optimized collectives (Bcast is now binomial by default)
+ * Port smpirun and smpicc to OS X
+
+ SimDag:
+ * Kill SD_link_get_properties: hard to maintain and makes very little sense
+ Shout out if you used it.
+
+ GRAS:
+ * Display the list of still queued messages in SG mode when existing
+ the process.
+
+ XBT:
+ * Add xbt_set_get_by_name_or_null() [Silas De Munck]
+ * Add xbt_graph_node_get_outedges() [Silas De Munck]
+ * Add xbt_str_from_file(FILE*)
+ * Add xbt_dict_get_key achieving a linear reverse search
+ * Remove the context module
+
+ Portability report of this version:
+ * Main portability targets:
+ - Linux(debian)/x86/context
+ - Linux(debian)/x86/pthreads
+ - Linux(debian)/amd64/context
+ - Linux(debian)/amd64/pthreads
+ On these, we still have the eratic breakages of gras/pmm and
+ amok/saturate_sg reported in previous version. We still think
+ that the tests are the cause of the fault, not the tested code.
+
+ - Mac OSX Leopard/x86/context
+ Still false negative in tesh autotesting.
+ Smpi still fails, but this time because readlink does not accept -f
+ Everything seems to work properly beside of that.
+
+ * Exotic platforms:
+ - AIX version 5.3 (only tested contexts this time)
+ Smpi still fails there because mktemp is not installed.
+ Everything seems to work properly beside of that.
+ - OpenSolaris 11
+ I managed to compile it for the first time, but several breakages.
+ Won't delay the release for this exotic platform.
+
+ * Windows: it's still lagging behind. If you want to help, please
+ stand up.
+
+ Timing report of this version:
+ This version seem to be more than 5% faster than 3.3.1 (on linux
+ 64bits with contextes). The gain is less than expected, we are
+ investigating this for next release.