+SimGrid (3.5) unstable; urgency=low
+
+ Msg
+ * New function: MSG_load_platform_script()
+ to make possible using a lua script instead of XML files to set up platforms
+ * New function: MSG_set_function
+ to associate functions to processes, used when bypassing the parser
+ Lua Bindings
+ * add layer to set up environment and bypass the XML surf parser
+ * modify the entry point, to take into consideration when lua is used only as a platform generator
+ SURF
+ * add new callbacks to the CPU & netwok models to create resources
+ no need to pass through the parser callbacks to do so.
+ * add new function to create routes table via the routing model
+ * add generic functions in the public interface
+ that allows the user to call SURF 'create_resource' methods from a lua script.
+ SIMIX :
+ * New function: SIMIX_process_set_function()
+ called by MSG_set_function
+ SimDag
+ * Change the way a task is considered as ready. Instead of removing
+ dependencies when a task is done, a counter is decreased. This way,
+ it is always possible to reach ancestors thanks to the
+ SD_taks_get_parents function (even after the end of the simulation.)
+ * Change the level of some logs in sd_global from INFO to VERB. The
+ corresponding tests are now less verbose
+ * Change the return type of SD_Simulate from (SD_task_t*) into
+ xbt_dynar_t. This function was in handling a dynar internally and
+ converted it into a NULL terminated array for historical reasons.
+ * Rename the SD_READY (all dependencies are satisfied and task is
+ scheduled) state in SD_RUNNABLE and define a new SD_SCHEDULABLE (all
+ dependencies are satisfied) state.
+ This prevents a confusion between the notion of "ready to schedule"
+ (SD_SCHEDULABLE) used in DAG scheduling and that of "ready to be
+ simulated" (SD_RUNNABLE) used by the simulation kernel.
+ * Add an example that scheduling a DAX on an heterogeneous platform
+ using a Min-Min strategy
+ * new function SD_dotload(char*) to load a DAG described in dot
+ format. This loader and the corresponding examples require the
+ installation of the graphviz library.
+
+ SIMIX
+ * Change the underlying waiting queue in semaphores so that a process
+ can wait on several of them simultaneously (as in waitany).
+ * Fix the way to handle tokens in semaphores so that all access patterns
+ work: {acquire, acquire_timeout, waitany} / {release, release_forever}.
+
+ XBT
+ * New data container: setset (set of sets of elements)
+ * New module: mmalloc (mapped malloc)
+ * New function: xbt_dict_cursor_set_data()
+ * New function: xbt_dynar_sort()
+ * New function: xbt_dynar_is_empty()
+ * New function: xbt_fifo_get_last_item()
+ * Bug fix in xbt_dynar_shrink(): use the right element size
+ * Use library init/fini functions for our initialization.
+ - you can use logs and other feature as soon as you want in your
+ code (even before the xbt_init / MSG_init)
+ - xbt_exit is now a no-op and produce a warning when used.
+
+ GRAS:
+ * New function: gras_msgtype_get_name()
+
+ Build chain: bug fixes and further polishing
+ * Fix the 'make install' target.
+ No need to use 'make install-simgrid' anymore
+ * Introduce a 'make dist' target compiling a *source* archive
+ 'make package' compiles a binary archive (not well tested)
+ * Compile java files only on need
+
+ Tracing:
+ * Tracing system
+ - tracing API for MSG changes: TRACE_start has no
+ longer parameters, the trace file is supplied through
+ an option passed to simulator. Categories declaration
+ and utilization remain the same. The following options
+ are supported:
+ --cfg=tracing/filename:msg.trace
+ --cfg=tracing/platform:1 (categorized resource use)
+ --cfg=tracing/msg/task:1 (task creation)
+ --cfg=tracing/msg/process:1 (process creation, migration)
+ --cfg=tracing/msg/volume:1 (volume of msg send/recv)
+ --cfg=tracing/smpi:1 (smpi interface tracing)
+ - examples of examples/msg/tracing updated
+
+ * Tracing the MPI interface implemented by SMPI
+ - Collective operations are traced with states
+ - Point-to-Point operations are traced with states/links
+ - Tracing activated by a parameter "-trace filename" passed
+ to smpirun during execution (considering that simgrid
+ is compiled with tracing enabled)
+ - To run the simulation with gdb, the simulator
+ accepts --cfg=tracing/smpi:1 to trace SMPI
+ - tesh files to check if smpi tracing is ok
+
+ * GTNetS tracing re-worked
+ - adaptation to the tracing system of GTNets to cope
+ with modifications regarding the fullduplex mode
+ - new tesh files to check if gtnets tracing is ok
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
+
+SimGrid (3.4.1) stable; urgency=low
+
+ The "Polishing easter eggs is probably a good idea" release.
+ This is a bug fixes release only.
+
+
+ Java Bindings
+ * Fix a bug preventing the tasks from begin garbage collected.
+
+ MSG
+ * Fix a bug occuring when a host involved in a communication fails.
+ This was not detected properly by the other peer involved in the
+ communication. Now, it's reported as a network error.
+
+ SimDag
+ * Warn the user about loop dependencies in data flow of DAX files
+ * Obey the control-flow dependencies of DAX files
+
+ Cmake
+ * Add option "enable_smpi" allowing to not compile SMPI.
+ Probably useful for the (Mac) users experiencing a build error here
+ * Improve the detection of lua5.1 and ruby1.8
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Tus, 04 May 2010 28 16:11:16 +0100
+
+SimGrid (3.4) stable; urgency=low
+
+ The "Easter in Cargese" release. Also known as (major changes):
+
+ * the "se habla Java, Ruby 話せます, fala-se Lua (and deaf-friendly)"
+ ~> bindings were greatly improved
+ ~> new tracing infrastructure for better visualization introduced
+
+ * the "Welcome to configury modernity" release.
+ ~> we switched from autotools to cmake, and improved our cdash
+
+
+ A more detailled list of changes follow (full detail in svn log).
+
+ Java Bindings: Various Cleanups
+ * (install java-gcj-compat-dev on debian-like to use them)
+ * Remove put/get: no need to export deprecated interface in Java
+ Use send/receive instead.
+ * Cleanup the examples and add a README per directory
+ * Remove example autoDestination (that's the only way to go now)
+ * Remove example explicitDestination (was a plain copy of basic)
+ * Make JniException a runtime exception, so that there is no need to
+ declare the fact that you may encounter such a beast. I guess that
+ nobody will ever want to survive such error.
+ * Create specific errors for each MSG case of failure:
+ host failure, transfer failure, timeout, task cancelled
+ * Cleanup the exceptions that may get thrown by each function
+ * Other internal cleanups in Java bindings. Performance still bad :/
+ Ruby and Lua Bindings: create them
+ * (install ruby1.8-dev/liblua5.1-0-dev on debian-like to use them)
+ * That's new and great, you should try them out.
+ Same functionalities than Java bindings, only even less polished
+ SimDag:
+ * Kill the useless "rate" argument of SD_task_get_execution_time()
+ Everyone used to provide -1 as a value, it was not used, and the
+ semantic of a possible use wasn't even clear.
+ * SD_SCHED_NO_COST: Constant to use as cost in SD_task_schedule()
+ either as comm costs or compute costs to mean that there is no
+ such thing for that specific task.
+ * Add a SD_task_set_name() function
+ * Fix SD_task_unschedule() on typed tasks
+ * Fix SD_task_get_execution_time() to return seconds, not flop*sec
+ * In DAX loader, accept useless 'level' attributes to <job> since
+ LIGO DAGs have them (seem to be to ease graphical representation).
+ MSG:
+ * Add an example masterslave_mailbox.c using send/receive and not
+ the deprecated put/get interface.
+ * Kill the MSG_paje_output() function. It's a noop since 2 years.
+ * Kill MSG_WARNING and MSG_FATAL return codes: they were not used
+ anywere in source.
+ * Rename MSG_TIMEOUT_FAILURE into MSG_TIMEOUT for sake of logic
+ (declare MSG_USE_DEPRECATED to still have the old name)
+ * Add a MSG_task_set_data() function
+ * About trace replay (see examples/msg/actions):
+ - implement barrier
+ - Allow to work with splitted trace files for each process
+ Give the specific trace file as argument of each process,
+ and call MSG_action_trace_run(NULL)
+ You can still have one merged file for all processes.
+ - Fix implementation of collective operations
+ * Allow task_execute() on 0-sized tasks (closes #10063)
+ SMPI:
+ * This is the first release of SimGrid where SMPI is not considered
+ beta anymore (even if some corners should still be improved)
+ * Port over the new SIMIX_network submodule (internal refactoring)
+ * Basic support to log events as with SMPE (use --cfg=SMPE:1)
+ * Implement more missing elements of the standard:
+ - MPI_COMM_SELF
+ - MPI_MAXLOC MPI_MINLOC + all associated datatype MPI_DOUBLE_INT,
+ MPI_FLOAT_INT, etc.
+ - MPI_Address() MPI_Get_count() MPI_Type_free() MPI_Type_extent()
+ MPI_Scan() MPI_Get_processor_name()
+ - Added implementation of missing case for Alltoall (warning: it's
+ *not* the bruck variant from OpenMPI; based on Alltoallv instead)
+ - SMPI_MPI_Gather() SMPI_MPI_Gatherv() SMPI_MPI_Scatterv()
+ SMPI_MPI_Reduce_scatter() SMPI_MPI_Allgather()
+ SMPI_MPI_Allgatherv()
+ * Bug fixes include:
+ - MPI_Waitsome() was broken
+ - Allow relative includes in smpicc
+ - Command line cfg argument 'reference_speed' was ignored...
+ - Some functions did not properly lead to auto-benching of user code
+ - smpicc passes -O2 by default (just like openmpi one)
+ SIMIX:
+ * add SIMIX_action_suspend() and SIMIX_action_resume() functions
+ * Bug fixes about timeouts during communications
+ * add SIMIX_message_sizes_output() as a pimple to write to file the
+ amount of messages per size. Use gnuplot to get histogram.
+ Pimple because that's the only user-visible function of simix,
+ defined directly in xbt.h (irk, sorry)
+ * About semaphores:
+ - Add a SIMIX_sem_get_capacity() function
+ - Fix interactions with processe resume/suspende
+ - release_forever() was stupidly broken
+ - Fix SIMIX_display_process_status() for processes in a semaphore
+ - Make SIMIX_sem_block_onto() user-visible
+ * Refactoring context stuff:
+ - Use pseudo-OOP for better modularity
+ - reimplement SIMIX_process_kill() without process_schedule() so
+ that the latter can take as invariant that it is called from
+ maestro.
+ - Merge context_start into context_new for sake of simplicity
+ SURF:
+ * Add a Vivaldi network model, coded live during SUD'10 ;)
+ * Rename configuration variables to start a hierarchy:
+ o cpu_model -> cpu/model
+ o network_model -> network/model
+ o workstation_model -> workstation/model
+ * New configuration variables:
+ o network/bandwidth_factor: correction to bandwith
+ o network/latency_factor: correction to latency
+ o netwotk/weight_S: correction to the weight of competing streams
+ * Add a long description to the models, that users can see with such
+ argument on the command line: --cfg=cpu/model:help
+ * --help-models display the long description of all known models
+ XBT:
+ * config: add the ability to set a default value after registration
+ Does not override any previously set value (e.g. from cmd line)
+ * dict: allow to have integer key and data.
+ When so, you need to use the following functions
+ void xbt_dicti_set(xbt_dict_t dict, uintptr_t key, uintptr_t data);
+ uintptr_t xbt_dicti_get(xbt_dict_t dict, uintptr_t key);
+ void xbt_dicti_remove(xbt_dict_t dict, uintptr_t key);
+ In contrary to regular dicts, the key is not malloced before copy.
+ Mixing scalar and regular elements in the same dict is not tested
+ (but may work).
+ * Allow to use xbt_dynar_shrink() to expend the dynar instead
+ Tracing for Visualization:
+ * SimGrid is now instrumented in order to generate a trace file for
+ visualization analysis: to use it, need to compile SimGrid with the
+ "tracing" option enabled, and instrument the program using SimGrid with
+ TRACE_start, TRACE_category, TRACE_msg_set_task_category and TRACE_end
+ (among other functions).
+ * The instrumentation only traces the platform utilization for now
+ * Documentation to use the tracing functions and how to analyze the
+ traces with the Triva tool is written.
+ * More information about: SimGrid FAQ (in the section Tracing Simulations
+ for Visualization)
+ Build system:
+ * We moved to cmake as default build system. Autotools support will
+ be dropped soon. Check the FAQ for more info about how to use it.
+ * Greatly improved our cdash/ctest interactions
+ Check http://cdash.inria.fr/CDash/index.php?project=Simgrid
+ * Added memory checking tests with valgrind; lot of memleak fixing.
+ This may be the first release of simgrid with so few memory issues
+ * Added code coverage tests.
+ Our coverage is still improvable, but at least we see it on cdash.
+
+ -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr> Wed, 28 Apr 2010 28 17:11:16 +0100