typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
+#endif /* ! C99 */
/* Limits of integral types. */
#ifndef INT8_MIN
#define UINT32_MAX (4294967295U)
#endif
-#endif /* ! C99 */
-
#endif /* ! FLEXINT_H */
#ifdef __cplusplus
/* Size of default input buffer. */
#ifndef YY_BUF_SIZE
-#ifdef __ia64__
-/* On IA-64, the buffer size is 16k, not 8k.
- * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
- * Ditto for the __ia64__ case accordingly.
- */
-#define YY_BUF_SIZE 32768
-#else
#define YY_BUF_SIZE 16384
-#endif /* __ia64__ */
#endif
/* The state buf must be large enough to hold one state per character in the main buffer.
*
* This program was generated with the FleXML XML processor generator.
* FleXML is Copyright (C) 1999-2005 Kristoffer Rose. All rights reserved.
- * FleXML is Copyright (C) 2003-2006 Martin Quinson. All rights reserved.
- * (Id: flexml.pl,v 1.62 2007/10/11 10:00:14 mquinson Exp).
+ * FleXML is Copyright (C) 2003-2011 Martin Quinson. All rights reserved.
+ * (Id: flexml.pl,v 1.67 2011/11/01 20:49:21 mquinson Exp).
*
* There are two, intertwined parts to this program, part A and part B.
*
*
* Some parts, here collectively called "Part A", are found in the
* FleXML package. They are Copyright (C) 1999-2005 Kristoffer Rose
- * and Copyright (C) 2003-2006 Martin Quinson. All rights reserved.
+ * and Copyright (C) 2003-2011 Martin Quinson. All rights reserved.
*
* You can redistribute, use, perform, display and/or modify "Part A"
* provided the following two conditions hold:
const char rcs_graphxml_flexml_skeleton[] =
"$" "Id: skel,v 1.40 2007/10/11 09:57:24 mquinson Exp $";
const char rcs_graphxml_flexml[] =
- "$" "Id: flexml.pl,v 1.62 2007/10/11 10:00:14 mquinson Exp $";
+ "$" "Id: flexml.pl,v 1.67 2011/11/01 20:49:21 mquinson Exp $";
/* ANSI headers. */
#include <stdlib.h> /* for realloc() -- needed here when using flex 2.5.4 */
#define graphxml_pcdata (graphxml_bufferstack + graphxml_pcdata_ix)
AT_graphxml_node_name AX_graphxml_node_name;
#define A_graphxml_node_name (graphxml_bufferstack + AX_graphxml_node_name)
+short int graphxml_node_name_isset;
AT_graphxml_edge_source AX_graphxml_edge_source;
#define A_graphxml_edge_source (graphxml_bufferstack + AX_graphxml_edge_source)
+short int graphxml_edge_source_isset;
AT_graphxml_node_position_y AX_graphxml_node_position_y;
#define A_graphxml_node_position_y (graphxml_bufferstack + AX_graphxml_node_position_y)
+short int graphxml_node_position_y_isset;
AT_graphxml_node_position_x AX_graphxml_node_position_x;
#define A_graphxml_node_position_x (graphxml_bufferstack + AX_graphxml_node_position_x)
+short int graphxml_node_position_x_isset;
AT_graphxml_edge_data AX_graphxml_edge_data;
#define A_graphxml_edge_data (graphxml_bufferstack + AX_graphxml_edge_data)
+short int graphxml_edge_data_isset;
AT_graphxml_edge_target AX_graphxml_edge_target;
#define A_graphxml_edge_target (graphxml_bufferstack + AX_graphxml_edge_target)
+short int graphxml_edge_target_isset;
AT_graphxml_graph_isDirected AX_graphxml_graph_isDirected;
#define A_graphxml_graph_isDirected AX_graphxml_graph_isDirected
+short int graphxml_graph_isDirected_isset;
AT_graphxml_node_label AX_graphxml_node_label;
#define A_graphxml_node_label (graphxml_bufferstack + AX_graphxml_node_label)
+short int graphxml_node_label_isset;
AT_graphxml_node_data AX_graphxml_node_data;
#define A_graphxml_node_data (graphxml_bufferstack + AX_graphxml_node_data)
+short int graphxml_node_data_isset;
AT_graphxml_edge_label AX_graphxml_edge_label;
#define A_graphxml_edge_label (graphxml_bufferstack + AX_graphxml_edge_label)
+short int graphxml_edge_label_isset;
AT_graphxml_edge_length AX_graphxml_edge_length;
#define A_graphxml_edge_length (graphxml_bufferstack + AX_graphxml_edge_length)
+short int graphxml_edge_length_isset;
AT_graphxml_edge_name AX_graphxml_edge_name;
#define A_graphxml_edge_name (graphxml_bufferstack + AX_graphxml_edge_name)
+short int graphxml_edge_name_isset;
/* XML state. */
#ifdef FLEX_DEBUG
/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
-#ifdef __ia64__
-/* On IA-64, the buffer size is 16k, not 8k */
-#define YY_READ_BUF_SIZE 16384
-#else
#define YY_READ_BUF_SIZE 8192
-#endif /* __ia64__ */
#endif
/* Copy whatever the last rule matched to the standard output. */
if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
{ \
int c = '*'; \
- size_t n; \
+ unsigned n; \
for ( n = 0; n < max_size && \
(c = getc( xbt_graph_parse_in )) != EOF && c != '\n'; ++n ) \
buf[n] = (char) c; \
YY_RULE_SETUP
{
AX_graphxml_graph_isDirected = A_graphxml_graph_isDirected_true;
+ graphxml_graph_isDirected_isset = 0;
ENTER(AL_graphxml_graph); pushbuffer(0);
}
YY_BREAK
YY_RULE_SETUP
{
AX_graphxml_node_label = 0;
+ graphxml_node_label_isset = 0;
AX_graphxml_node_name = 0;
+ graphxml_node_name_isset = 0;
AX_graphxml_node_data = 0;
+ graphxml_node_data_isset = 0;
AX_graphxml_node_position_x = 1;
+ graphxml_node_position_x_isset = 0;
AX_graphxml_node_position_y = 6;
+ graphxml_node_position_y_isset = 0;
ENTER(AL_graphxml_node); pushbuffer(0);
}
YY_BREAK
case 33:
/* rule 33 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_node_label);
+if (graphxml_node_label_isset != 0) {FAIL("Multiple definition of attribute label in <graphxml_node>");} graphxml_node_label_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_node_label);
YY_BREAK
case 34:
/* rule 34 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_node_label);
+if (graphxml_node_label_isset != 0) {FAIL("Multiple definition of attribute label in <graphxml_node>");} graphxml_node_label_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_node_label);
YY_BREAK
case 35:
/* rule 35 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_node_name);
+if (graphxml_node_name_isset != 0) {FAIL("Multiple definition of attribute name in <graphxml_node>");} graphxml_node_name_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_node_name);
YY_BREAK
case 36:
/* rule 36 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_node_name);
+if (graphxml_node_name_isset != 0) {FAIL("Multiple definition of attribute name in <graphxml_node>");} graphxml_node_name_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_node_name);
YY_BREAK
case 37:
/* rule 37 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_node_data);
+if (graphxml_node_data_isset != 0) {FAIL("Multiple definition of attribute data in <graphxml_node>");} graphxml_node_data_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_node_data);
YY_BREAK
case 38:
/* rule 38 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_node_data);
+if (graphxml_node_data_isset != 0) {FAIL("Multiple definition of attribute data in <graphxml_node>");} graphxml_node_data_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_node_data);
YY_BREAK
case 39:
/* rule 39 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_node_position_x);
+if (graphxml_node_position_x_isset != 0) {FAIL("Multiple definition of attribute position_x in <graphxml_node>");} graphxml_node_position_x_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_node_position_x);
YY_BREAK
case 40:
/* rule 40 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_node_position_x);
+if (graphxml_node_position_x_isset != 0) {FAIL("Multiple definition of attribute position_x in <graphxml_node>");} graphxml_node_position_x_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_node_position_x);
YY_BREAK
case 41:
/* rule 41 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_node_position_y);
+if (graphxml_node_position_y_isset != 0) {FAIL("Multiple definition of attribute position_y in <graphxml_node>");} graphxml_node_position_y_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_node_position_y);
YY_BREAK
case 42:
/* rule 42 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_node_position_y);
+if (graphxml_node_position_y_isset != 0) {FAIL("Multiple definition of attribute position_y in <graphxml_node>");} graphxml_node_position_y_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_node_position_y);
YY_BREAK
case 43:
YY_RULE_SETUP
YY_RULE_SETUP
{
AX_graphxml_edge_label = 0;
+ graphxml_edge_label_isset = 0;
AX_graphxml_edge_name = 0;
+ graphxml_edge_name_isset = 0;
AX_graphxml_edge_source = 0;
+ graphxml_edge_source_isset = 0;
AX_graphxml_edge_target = 0;
+ graphxml_edge_target_isset = 0;
AX_graphxml_edge_length = 11;
+ graphxml_edge_length_isset = 0;
AX_graphxml_edge_data = 0;
+ graphxml_edge_data_isset = 0;
ENTER(AL_graphxml_edge); pushbuffer(0);
}
YY_BREAK
case 52:
/* rule 52 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_label);
+if (graphxml_edge_label_isset != 0) {FAIL("Multiple definition of attribute label in <graphxml_edge>");} graphxml_edge_label_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_label);
YY_BREAK
case 53:
/* rule 53 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_label);
+if (graphxml_edge_label_isset != 0) {FAIL("Multiple definition of attribute label in <graphxml_edge>");} graphxml_edge_label_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_label);
YY_BREAK
case 54:
/* rule 54 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_name);
+if (graphxml_edge_name_isset != 0) {FAIL("Multiple definition of attribute name in <graphxml_edge>");} graphxml_edge_name_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_name);
YY_BREAK
case 55:
/* rule 55 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_name);
+if (graphxml_edge_name_isset != 0) {FAIL("Multiple definition of attribute name in <graphxml_edge>");} graphxml_edge_name_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_name);
YY_BREAK
case 56:
/* rule 56 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_source);
+if (graphxml_edge_source_isset != 0) {FAIL("Multiple definition of attribute source in <graphxml_edge>");} graphxml_edge_source_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_source);
YY_BREAK
case 57:
/* rule 57 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_source);
+if (graphxml_edge_source_isset != 0) {FAIL("Multiple definition of attribute source in <graphxml_edge>");} graphxml_edge_source_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_source);
YY_BREAK
case 58:
/* rule 58 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_target);
+if (graphxml_edge_target_isset != 0) {FAIL("Multiple definition of attribute target in <graphxml_edge>");} graphxml_edge_target_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_target);
YY_BREAK
case 59:
/* rule 59 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_target);
+if (graphxml_edge_target_isset != 0) {FAIL("Multiple definition of attribute target in <graphxml_edge>");} graphxml_edge_target_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_target);
YY_BREAK
case 60:
/* rule 60 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_length);
+if (graphxml_edge_length_isset != 0) {FAIL("Multiple definition of attribute length in <graphxml_edge>");} graphxml_edge_length_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_length);
YY_BREAK
case 61:
/* rule 61 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_length);
+if (graphxml_edge_length_isset != 0) {FAIL("Multiple definition of attribute length in <graphxml_edge>");} graphxml_edge_length_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_length);
YY_BREAK
case 62:
/* rule 62 can match eol */
YY_RULE_SETUP
-ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_data);
+if (graphxml_edge_data_isset != 0) {FAIL("Multiple definition of attribute data in <graphxml_edge>");} graphxml_edge_data_isset = 1; ENTER(VALUE1); BUFFERSET(AX_graphxml_edge_data);
YY_BREAK
case 63:
/* rule 63 can match eol */
YY_RULE_SETUP
-ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_data);
+if (graphxml_edge_data_isset != 0) {FAIL("Multiple definition of attribute data in <graphxml_edge>");} graphxml_edge_data_isset = 1; ENTER(VALUE2); BUFFERSET(AX_graphxml_edge_data);
YY_BREAK
case 64:
YY_RULE_SETUP
/** Setup the input buffer state to scan the given bytes. The next call to xbt_graph_parse_lex() will
* scan from a @e copy of @a bytes.
- * @param yybytes the byte buffer to scan
- * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
+ * @param bytes the byte buffer to scan
+ * @param len the number of bytes in the buffer pointed to by @a bytes.
*
* @return the newly allocated buffer state object.
*/
