endif()
endif()
-## We need a decent support of the c++11 standard
-include(CheckCXXCompilerFlag)
-CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
-if(COMPILER_SUPPORTS_CXX11)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
-else()
- message(FATAL_ERROR
- "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
- "Please install a decent C++ compiler (remove CMakeCache.txt once it's installed).")
-endif()
-
-### And we need C11 standard, too
-include(CheckCCompilerFlag)
-CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
-if(COMPILER_SUPPORTS_C11)
- set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
-else()
- message(FATAL_ERROR
- "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
- "Please use a decent C compiler "
- "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
-endif()
-if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
- ### gcc 4.[1-5] cannot compile ucontext on OSX
- message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
- set(HAVE_UCONTEXT_H 0)
+## We need a decent support of the C++11 and C11 standards
+set(CMAKE_CXX_STANDARD 11)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+
+set(CMAKE_C_STANDARD 11)
+set(CMAKE_C_STANDARD_REQUIRED ON)
+
+if (CMAKE_C_COMPILER_ID STREQUAL "Intel" AND CMAKE_C11_EXTENSION_COMPILE_OPTION STREQUAL "-std=c11")
+ set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
endif()
### Check threading support
endif()
if(CMAKE_Fortran_COMPILER)
+
# Fortran compiler detected: save it, then replace by smpiff
set(SMPI_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
- set(CMAKE_Fortran_COMPILER smpiff)
# Set flags/libs to be used in smpiff
if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
set(SMPI_Fortran_FLAGS "\"-fpic\" \"-ff2c\" \"-fno-second-underscore\"")
set(SMPI_Fortran_LIBS "\"-lgfortran\"")
+ set(SMPI_GFORTRAN 1)
elseif(CMAKE_Fortran_COMPILER_ID MATCHES "Intel")
set(SMPI_Fortran_FLAGS "\"-fPIC\" \"-nofor-main\"")
set(SMPI_Fortran_LIBS "\"-lifcore\"")
- elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI") # flang
+ set(SMPI_IFORT 1)
+ elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI|Flang") # flang
set(SMPI_Fortran_FLAGS "\"-fPIC\"")
set(SMPI_Fortran_LIBS "")
+ set(SMPI_FLANG 1)
endif()
set(SMPI_FORTRAN 1)
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
set(SIMGRID_VERSION_MAJOR "3")
-set(SIMGRID_VERSION_MINOR "18")
-set(SIMGRID_VERSION_PATCH "0")
+set(SIMGRID_VERSION_MINOR "21")
+set(SIMGRID_VERSION_PATCH "90")
set(SIMGRID_VERSION_EXTRA "-DEVEL") # Extra words to add to version string (e.g. -rc1)
-set(SIMGRID_VERSION_DATE "2017") # Year for copyright information
+set(SIMGRID_VERSION_DATE "2018") # Year for copyright information
if(${SIMGRID_VERSION_PATCH} EQUAL "0")
set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
### Set the library providing dlopen
-if("${CMAKE_SYSTEM}" MATCHES "Linux")
+if("${CMAKE_SYSTEM_NAME}" MATCHES "kFreeBSD|Linux")
find_library(DL_LIBRARY dl)
-endif("${CMAKE_SYSTEM}" MATCHES "Linux")
+endif()
### Find programs and paths
FIND_PROGRAM(GCOV_PATH gcov)
SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
### Compute the include paths
-set(INCLUDES
+
+# Only include public headers by default
+include_directories(
+ ${CMAKE_BINARY_DIR}/include
+ ${CMAKE_HOME_DIRECTORY}/include
+)
+
+# Compute the ones that should be added when compiling the library
+set(INTERNAL_INCLUDES
${CMAKE_BINARY_DIR}
- ${CMAKE_BINARY_DIR}/include
${CMAKE_HOME_DIRECTORY}
- ${CMAKE_HOME_DIRECTORY}/include
${CMAKE_HOME_DIRECTORY}/src/include
)
if(enable_smpi)
- set (INCLUDES ${INCLUDES} ${CMAKE_HOME_DIRECTORY}/src/smpi/include)
+ set (INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_HOME_DIRECTORY}/src/smpi/include)
endif()
if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
- set(INCLUDES ${INCLUDES} /usr/include/)
+ set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} /usr/include/)
endif()
if(WIN32)
set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
- set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
+ set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_INCLUDE_WIN})
unset(CMAKE_INCLUDE_WIN)
endif()
-include_directories(${INCLUDES})
-
# library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
set(SIMGRID_DEP "-lm")
ENDIF()
if (WIN32)
message(STATUS "Disable fast raw contexts on Windows.")
- elseif(enable_address_sanitizer)
- message("Disable fast raw contexts with ASan")
else()
set(HAVE_RAW_CONTEXTS 1)
endif()
include(FindNS3)
if (SIMGRID_HAVE_NS3)
set(SIMGRID_HAVE_NS3 1)
+ foreach(lib core csma point-to-point internet network applications)
+ set(SIMGRID_DEP "${SIMGRID_DEP} -lns${NS3_VERSION}-${lib}${NS3_SUFFIX}")
+ endforeach()
else()
message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
endif()
endif()
endif()
-# Not finding this is perfectly OK
-find_package(Boost COMPONENTS unit_test_framework)
-if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
- message("-- (enabling the Boost-based unit tests)")
-else()
- message("-- (disabling the Boost-based unit tests -- please install libboost-test-dev)")
-endif()
-
-
+# But we do need the core of Boost
find_package(Boost 1.48)
if(Boost_FOUND)
include_directories(${Boost_INCLUDE_DIRS})
endif()
endif()
-find_package(Boost COMPONENTS context)
-set(Boost_FOUND 1) # This component is optional
+# cmake before 3.13.1 does not know about stacktrace components. Fix it.
+# Usable components: https://www.boost.org/doc/libs/1_65_1/doc/html/stacktrace/configuration_and_build.html
+set(_Boost_STACKTRACE_HEADERS "boost/stacktrace.hpp")
+set(_Boost_STACKTRACE_BACKTRACE_HEADERS "boost/stacktrace.hpp")
+
+find_package(Boost 1.59 COMPONENTS context stacktrace_backtrace unit_test_framework)
+set(Boost_FOUND 1) # These components are optionals
+message(STATUS "Mandatory components found. SimGrid is compilable.")
+message(STATUS "Looking for optional Boost components:")
+
+if (Boost_STACKTRACE_BACKTRACE_FOUND)
+ message (STATUS " stacktrace: found. Activating human-readable stack traces.")
+ set(HAVE_BOOST_STACKTRACE 1)
+ set(SIMGRID_DEP "${SIMGRID_DEP} -lboost_stacktrace_backtrace")
+else()
+ message (STATUS " stacktrace: MISSING. Install libboost-stacktrace-dev to display the stacktraces.")
+ set(HAVE_BOOST_STACKTRACE 0)
+endif()
+
if(Boost_CONTEXT_FOUND)
- message("Found Boost.Context")
+ message (STATUS " context: found. Activating Boost contexts.")
set(HAVE_BOOST_CONTEXTS 1)
else()
- message (" boost : found.")
- message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
+ message (STATUS " context: MISSING. Install libboost-context-dev for this optional feature.")
set(HAVE_BOOST_CONTEXTS 0)
endif()
+if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
+ message(STATUS " unit_test_framework: found. Activating the Boost-based unit tests.")
+else()
+ message(STATUS " unit_test_framework: MISSING. Install libboost-test-dev (>= v1.59) to activate the Unit Tests.")
+endif()
+
+
# Checks for header libraries functions.
CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
-if(NOT APPLE) # OS X El Capitan deprecates this function
- CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
-endif()
-CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
set(HAVE_PTHREAD_SETAFFINITY 0)
CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
-CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
-CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
-CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
set(HAVE_VASPRINTF 1)
endif()
-#Check if __thread is defined
-execute_process(
- COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_thread_storage_run)
-file(REMOVE testprog)
-if(HAVE_thread_storage_run)
- set(HAVE_THREAD_LOCAL_STORAGE 1)
-else()
- set(HAVE_THREAD_LOCAL_STORAGE 0)
-endif()
-
CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
set(enable_model-checking FALSE)
endif()
-if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
+if(HAVE_MMAP)
SET(HAVE_MMALLOC 1)
else()
SET(HAVE_MMALLOC 0)
include(FindLibunwind)
if(HAVE_LIBUNWIND)
- if(NOT APPLE)
- SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind")
- else()
- # Apple forbids to link directly against its libunwind implementation
- # So let's comply and link against the System framework
- SET(SIMGRID_DEP "${SIMGRID_DEP} -lSystem")
- endif()
- if("${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
- set(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-ptrace")
- # This supposes that the host machine is either an AMD or a X86.
- # This is deeply wrong, and should be fixed by manually loading -lunwind-PLAT (FIXME)
- if(SIMGRID_PROCESSOR_x86_64)
- SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86_64")
- else()
- SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86")
- endif()
- endif()
+ SET(SIMGRID_DEP "${SIMGRID_DEP} ${LIBUNWIND_LIBRARIES}")
else()
if(enable_model-checking)
message(FATAL_ERROR "Please install libunwind-dev libdw-dev libelf-dev libevent-dev if you want to compile the SimGrid model checker.")
SET(SIMGRID_HAVE_MC 0)
set(HAVE_MMALLOC 0)
endif()
+mark_as_advanced(PATH_LIBDW_H)
+mark_as_advanced(PATH_LIBDW_LIB)
if (enable_model-checking AND enable_ns3)
message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
SET(HAVE_SMPI 0)
endif()
-#--------------------------------------------------------------------------------------------------
-### Check for GNU dynamic linker
-CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
-if (HAVE_DLFCN_H)
- execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_GNU_LD_compil
- )
- if(HAVE_GNU_LD_compil)
- set(HAVE_GNU_LD 0)
- message(STATUS "Warning: test program toward GNU ld failed to compile:")
- message(STATUS "${HAVE_GNU_LD_comp_output}")
- else()
- execute_process(COMMAND ./test_gnu_ld
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_GNU_LD_run
- OUTPUT_VARIABLE var_exec
- )
-
- if(NOT HAVE_GNU_LD_run)
- set(HAVE_GNU_LD 1)
- message(STATUS "We are using GNU dynamic linker")
- else()
- set(HAVE_GNU_LD 0)
- message(STATUS "Warning: error while checking for GNU ld:")
- message(STATUS "Test output: '${var_exec}'")
- message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
- endif()
- file(REMOVE test_gnu_ld)
- endif()
-endif()
-
#--------------------------------------------------------------------------------------------------
### Initialize of CONTEXT THREADS
if(CMAKE_USE_PTHREADS_INIT)
### Test that we have a way to create semaphores
+ set(HAVE_SEM_OPEN 0)
+ CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
if(HAVE_SEM_OPEN_LIB)
- execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
- )
-
- # Test sem_open by compiling:
- if(HAVE_SEM_OPEN_compil)
- set(HAVE_SEM_OPEN 0)
- message(STATUS "Warning: sem_open not compilable")
- message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
- else()
- set(HAVE_SEM_OPEN 1)
- message(STATUS "sem_open is compilable")
- endif()
-
- # If we're not crosscompiling, we check by executing the program:
- if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
- execute_process(COMMAND ./sem_open
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_SEM_OPEN_run
- OUTPUT_VARIABLE var_compil
- )
- if (NOT HAVE_SEM_OPEN_run)
- set(HAVE_SEM_OPEN 1)
- message(STATUS "sem_open is executable")
+ try_run(semopen_retval semopen_compilable
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c
+ LINK_LIBRARIES pthread
+ COMPILE_OUTPUT_VARIABLE semopen_compilmsg
+ RUN_OUTPUT_VARIABLE semopen_runmsg)
+
+ if(semopen_compilable)
+ if(NOT semopen_retval) # error if not 0
+ message(STATUS "sem_open is compilable and executable")
+ set(HAVE_SEM_OPEN 1)
else()
- set(HAVE_SEM_OPEN 0)
- if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
- else()
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
- endif()
- message(STATUS "Warning: sem_open not executable")
- message(STATUS "Compilation output: '${var_compil}'")
- message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
+ message(STATUS "Warning: sem_open seems compilable but not executable")
+ message(STATUS "Compilation output: ${semopen_compilmsg}")
+ message(STATUS "Execution output: ${semopen_runmsg}")
+ message(STATUS "Exit value: ${semopen_retval}")
endif()
+ else()
+ message(STATUS "Warning: sem_open not compilable")
+ message(STATUS "Compilation output: ${semopen_compilmsg}")
endif()
- file(REMOVE sem_open)
- else()
- set(HAVE_SEM_OPEN 0)
+ unset(semopen_compilable)
+ unset(semopen_retval)
+ unset(semopen_runmsg)
+ unset(semopen_compilmsg)
endif()
+ set(HAVE_SEM_INIT 0)
+ if(NOT APPLE) # OS X El Capitan deprecates this function
+ CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
+ endif()
if(HAVE_SEM_INIT_LIB)
- execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_SEM_INIT_run
- OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
-
- # Test sem_init by compiling:
- if(HAVE_SEM_INIT_compil)
- set(HAVE_SEM_INIT 0)
- message(STATUS "Warning: sem_init not compilable")
- message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
- else()
- set(HAVE_SEM_INIT 1)
- message(STATUS "sem_init is compilable")
- endif()
-
- # If we're not crosscompiling, we check by executing the program:
- if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
- execute_process(COMMAND ./sem_init
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_SEM_INIT_run
- OUTPUT_VARIABLE var_compil
- )
- if (NOT HAVE_SEM_INIT_run)
- set(HAVE_SEM_INIT 1)
- message(STATUS "sem_init is executable")
+ try_run(seminit_retval seminit_compilable
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c
+ LINK_LIBRARIES pthread
+ COMPILE_OUTPUT_VARIABLE seminit_compilmsg
+ RUN_OUTPUT_VARIABLE seminit_runmsg)
+
+ if(seminit_compilable)
+ if(NOT seminit_retval) # error if not 0
+ message(STATUS "sem_init is compilable and executable")
+ set(HAVE_SEM_INIT 1)
else()
- set(HAVE_SEM_INIT 0)
- if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
- else()
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
- endif()
- message(STATUS "Warning: sem_init not executable")
- message(STATUS "Compilation output: '${var_compil}'")
- message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
+ message(STATUS "Warning: sem_init seems compilable but not executable")
+ message(STATUS "Compilation output: ${seminit_compilmsg}")
+ message(STATUS "Execution output: ${seminit_runmsg}")
+ message(STATUS "Exit value: ${seminit_retval}")
endif()
+ else()
+ message(STATUS "Warning: sem_init not compilable")
+ message(STATUS "Compilation output: ${seminit_compilmsg}")
endif()
- file(REMOVE sem_init)
- else()
- set(HAVE_SEM_INIT 0)
+ unset(seminit_compilable)
+ unset(seminit_retval)
+ unset(seminit_runmsg)
+ unset(seminit_compilmsg)
endif()
if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
- message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
+ message(FATAL_ERROR "Semaphores are not usable (failed to use both sem_open and sem_init), but they are mandatory to threads (you may need to mount /dev).")
endif()
set(HAVE_THREAD_CONTEXTS 1)
- message("-- Support for thread context factory ok.")
+ message(STATUS "Support for thread context factory ok.")
endif()
set(HAVE_UCONTEXT_CONTEXTS 0)
if(NOT HAVE_UCONTEXT_H)
- message("-- No ucontext factory: <ucontext.h> not found.")
+ message(STATUS "No ucontext factory: <ucontext.h> not found.")
elseif(APPLE)
- message("-- No ucontext factory: Apple don't want us to use them.")
+ message(STATUS "No ucontext factory: Apple don't want us to use them.")
set(HAVE_UCONTEXT_H 0)
-elseif(enable_address_sanitizer)
- message("-- No ucontext factory: ASan does not support it (see http://code.google.com/p/address-sanitizer/issues/detail?id=189)")
else()
try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
OUTPUT_VARIABLE compile_makecontext_output)
#If can have both context
if(compile_makecontext)
set(HAVE_UCONTEXT_CONTEXTS 1)
- message("-- Support for ucontext factory ok.")
+ message(STATUS "Support for ucontext factory ok.")
else()
- message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
- message("-- No ucontext factory: makecontext() is not compilable.")
+ message(STATUS "Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
+ message(STATUS "No ucontext factory: makecontext() is not compilable.")
endif()
# Stack setup (size and address)
file(REMOVE test_stackgrowth)
#--------------------------------------------------------------------------------------------------
-### check for addr2line
-find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
-if(ADDR2LINE)
- set(ADDR2LINE "${ADDR2LINE}/addr2line")
-endif()
-
###############
## GIT version check
##
# Avoid triggering a (full) rebuild by touching the files if they did not really change
configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
-configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid/config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated" @ONLY IMMEDIATE)
execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
-execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid/config.h)
file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
-file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
+file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated)
# We need two versions of the SMPI scripts because they contain the path to the library
# so, it depends of whether SimGrid is installed, or run from the sources (during the build)
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
endif()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-set(SMPIMAIN smpimain)
+set(SMPIMAIN ${libdir}/simgrid/smpimain)
+set(SMPIREPLAYMAIN ${libdir}/simgrid/smpireplaymain)
configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
+#configure mpif.f90 to build mpi.mod
+if(SMPI_FORTRAN)
+ set(MODULE_MPIF_IN "module mpi")
+ set(MODULE_MPIF_OUT "end module mpi")
+ configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated @ONLY)
+ execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+ set(CMAKE_Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/include/smpi)
+ add_library(mpi SHARED ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+endif()
+
foreach(script cc cxx ff f90 run)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
endforeach()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
endif()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-set(SMPIMAIN ${CMAKE_BINARY_DIR}/bin/smpimain)
+set(SMPIMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpimain)
+set(SMPIREPLAYMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpireplaymain)
foreach(script cc cxx ff f90 run)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
set(generated_headers_to_install
${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
- ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
+ ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h
)
set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allreduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_cluster ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_cluster COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_coll ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_coll COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources COPYONLY)
+
set(generated_files_to_clean
${generated_files_to_clean}
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
- ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/replay_multiple_manual.tesh
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty1
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time_and_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed1
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_nojob
)
endif()
message(" ${line}")
endforeach()
message("##########################################")
-message("#### Content of simgrid_config.h ####")
+message("#### Content of simgrid/config.h ####")
message("##########################################")
-file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
+file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h config_output)
LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
foreach(line ${config_output})
message(" ${line}")