#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
+ * if you want the limit (max/min) macros for int types.
*/
#ifndef __STDC_LIMIT_MACROS
#define __STDC_LIMIT_MACROS 1
typedef signed char flex_int8_t;
typedef short int flex_int16_t;
typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
+typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
/* Note: We specifically omit the test for yy_rule_can_match_eol because it requires
* access to the local variable yy_act. Since yyless() is a macro, it would break
- * existing scanners that call yyless() from OUTSIDE dax_lex.
+ * existing scanners that call yyless() from OUTSIDE dax_lex.
* One obvious solution it to make yy_act a global. I tried that, and saw
* a 5% performance hit in a non-dax_lineno scanner, because yy_act is
* normally declared as a register variable-- so it is not worth it.
if ( *p == '\n' )\
--dax_lineno;\
}while(0)
-
+
/* Return all but the first "n" matched characters back to the input stream. */
#define yyless(n) \
do \
int yy_bs_lineno; /**< The line count. */
int yy_bs_column; /**< The column count. */
-
+
/* Whether to try to fill the input buffer when we reach the
* end of it.
*/
/* Table of booleans, true if rule could match eol. */
static yyconst flex_int32_t yy_rule_can_match_eol[141] =
{ 0,
-0, 0, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0,
- 0, 0, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 1, 1, 1,
- 1, 0, 0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 0, 0, 0, 1,
+0, 0, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0,
+ 0, 0, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 1, 1, 1,
+ 1, 0, 0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 0, 0, 0, 1,
0, };
static yy_state_type yy_last_accepting_state;
* FleXML is Copyright (C) 1999-2005 Kristoffer Rose. All rights reserved.
* FleXML is Copyright (C) 2003-2013 Martin Quinson. All rights reserved.
* (1.9.6).
- *
+ *
* There are two, intertwined parts to this program, part A and part B.
*
* Part A
* ------
- *
- * Some parts, here collectively called "Part A", are found in the
+ *
+ * Some parts, here collectively called "Part A", are found in the
* FleXML package. They are Copyright (C) 1999-2005 Kristoffer Rose
* and Copyright (C) 2003-2013 Martin Quinson. All rights reserved.
*
* Notice that these are explicit rights granted to you for files
* generated by the FleXML system. For your rights in connection with
* the FleXML system itself please consult the GNU General Public License.
- *
+ *
* Part B
* ------
- *
- * The other parts, here collectively called "Part B", and which came
- * from the DTD used by FleXML to generate this program, can be
+ *
+ * The other parts, here collectively called "Part B", and which came
+ * from the DTD used by FleXML to generate this program, can be
* distributed (or not, as the case may be) under the terms of whoever
- * wrote them, provided these terms respect and obey the two conditions
+ * wrote them, provided these terms respect and obey the two conditions
* above under the heading "Part A".
*
* The author of and contributors to FleXML specifically disclaim
- * any copyright interest in "Part B", unless "Part B" was written
+ * any copyright interest in "Part B", unless "Part B" was written
* by the author of or contributors to FleXML.
- *
+ *
*/
/* Version strings. */
#include <assert.h>
#include <stdarg.h>
#include <ctype.h>
-
+
#if defined(_WIN32) || defined(__WIN32__) || defined(WIN32) || defined(__TOS_WIN__)
# ifndef __STRICT_ANSI__
# include <io.h>
#else
# include <unistd.h>
#endif
-
+
#ifndef FLEXML_INDEXSTACKSIZE
#define FLEXML_INDEXSTACKSIZE 1000
#endif
{
ck_ilimit();
indexstack[inext++] = p;
- indexstack[inext++] = bnext;
+ indexstack[inext++] = bnext;
}
static int popbuffer(void)
#endif
#ifndef YY_NO_UNPUT
-
+
#endif
#ifndef yytext_ptr
static int yy_start_stack_ptr = 0;
static int yy_start_stack_depth = 0;
static int *yy_start_stack = NULL;
-
+
static void yy_push_state (int _new_state );
-
+
static void yy_pop_state (void );
-
+
/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
#ifdef __ia64__
yy_state_type yy_current_state;
char *yy_cp, *yy_bp;
int yy_act;
-
+
if ( !(yy_init) )
{
(yy_init) = 1;
yy_size_t yyl;
for ( yyl = 0; yyl < dax_leng; ++yyl )
if ( dax_text[yyl] == '\n' )
-
+
dax_lineno++;
;
}
case 11:
/* rule 11 can match eol */
YY_RULE_SETUP
-SET(ROOT_dax__adag);
+SET(ROOT_dax__adag);
YY_BREAK
case 12:
/* rule 12 can match eol */
{
yy_state_type yy_current_state;
char *yy_cp;
-
+
yy_current_state = (yy_start);
for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
{
int c;
-
+
*(yy_c_buf_p) = (yy_hold_char);
if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
(yy_hold_char) = *++(yy_c_buf_p);
if ( c == '\n' )
-
+
dax_lineno++;
;
/** Immediately switch to a different input stream.
* @param input_file A readable stream.
- *
+ *
* @note This function does not reset the start condition to @c INITIAL .
*/
void dax_restart (FILE * input_file )
{
-
+
if ( ! YY_CURRENT_BUFFER ){
dax_ensure_buffer_stack ();
YY_CURRENT_BUFFER_LVALUE =
/** Switch to a different input buffer.
* @param new_buffer The new input buffer.
- *
+ *
*/
void dax__switch_to_buffer (YY_BUFFER_STATE new_buffer )
{
-
+
/* TODO. We should be able to replace this entire function body
* with
* dax_pop_buffer_state();
/** Allocate and initialize an input buffer state.
* @param file A readable stream.
* @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
+ *
* @return the allocated buffer state.
*/
YY_BUFFER_STATE dax__create_buffer (FILE * file, int size )
{
YY_BUFFER_STATE b;
-
+
b = (YY_BUFFER_STATE) dax_alloc(sizeof( struct yy_buffer_state ) );
if ( ! b )
YY_FATAL_ERROR( "out of dynamic memory in dax__create_buffer()" );
/** Destroy the buffer.
* @param b a buffer created with dax__create_buffer()
- *
+ *
*/
void dax__delete_buffer (YY_BUFFER_STATE b )
{
-
+
if ( ! b )
return;
{
int oerrno = errno;
-
+
dax__flush_buffer(b );
b->yy_input_file = file;
}
b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-
+
errno = oerrno;
}
/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
* @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
+ *
*/
void dax__flush_buffer (YY_BUFFER_STATE b )
{
* the current state. This function will allocate the stack
* if necessary.
* @param new_buffer The new state.
- *
+ *
*/
void dax_push_buffer_state (YY_BUFFER_STATE new_buffer )
{
/** Removes and deletes the top of the stack, if present.
* The next element becomes the new top.
- *
+ *
*/
void dax_pop_buffer_state (void)
{
static void dax_ensure_buffer_stack (void)
{
yy_size_t num_to_alloc;
-
+
if (!(yy_buffer_stack)) {
/* First allocation is just for 2 elements, since we don't know if this
);
if ( ! (yy_buffer_stack) )
YY_FATAL_ERROR( "out of dynamic memory in dax_ensure_buffer_stack()" );
-
+
memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
+
(yy_buffer_stack_max) = num_to_alloc;
(yy_buffer_stack_top) = 0;
return;
/** Setup the input buffer state to scan directly from a user-specified character buffer.
* @param base the character buffer
* @param size the size in bytes of the character buffer
- *
- * @return the newly allocated buffer state object.
+ *
+ * @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE dax__scan_buffer (char * base, yy_size_t size )
{
YY_BUFFER_STATE b;
-
+
if ( size < 2 ||
base[size-2] != YY_END_OF_BUFFER_CHAR ||
base[size-1] != YY_END_OF_BUFFER_CHAR )
/** Setup the input buffer state to scan a string. The next call to dax_lex() will
* scan from a @e copy of @a str.
* @param yystr a NUL-terminated string to scan
- *
+ *
* @return the newly allocated buffer state object.
* @note If you want to scan bytes that may contain NUL values, then use
* dax__scan_bytes() instead.
*/
YY_BUFFER_STATE dax__scan_string (yyconst char * yystr )
{
-
+
return dax__scan_bytes(yystr,strlen(yystr) );
}
* scan from a @e copy of @a bytes.
* @param yybytes the byte buffer to scan
* @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
- *
+ *
* @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE dax__scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len )
char *buf;
yy_size_t n;
yy_size_t i;
-
+
/* Get memory for full buffer, including space for trailing EOB's. */
n = _yybytes_len + 2;
buf = (char *) dax_alloc(n );
/* Accessor methods (get/set functions) to struct members. */
/** Get the current line number.
- *
+ *
*/
int dax_get_lineno (void)
{
-
+
return dax_lineno;
}
/** Get the input stream.
- *
+ *
*/
FILE *dax_get_in (void)
{
}
/** Get the output stream.
- *
+ *
*/
FILE *dax_get_out (void)
{
}
/** Get the length of the current token.
- *
+ *
*/
yy_size_t dax_get_leng (void)
{
}
/** Get the current token.
- *
+ *
*/
char *dax_get_text (void)
/** Set the current line number.
* @param _line_number line number
- *
+ *
*/
void dax_set_lineno (int _line_number )
{
-
+
dax_lineno = _line_number;
}
/** Set the input stream. This does not discard the current
* input buffer.
* @param _in_str A readable stream.
- *
+ *
* @see dax__switch_to_buffer
*/
void dax_set_in (FILE * _in_str )
/* We do not touch dax_lineno unless the option is enabled. */
dax_lineno = 1;
-
+
(yy_buffer_stack) = 0;
(yy_buffer_stack_top) = 0;
(yy_buffer_stack_max) = 0;
/* dax_lex_destroy is for both reentrant and non-reentrant scanners. */
int dax_lex_destroy (void)
{
-
+
/* Pop the buffer stack, destroying each element. */
while(YY_CURRENT_BUFFER){
dax__delete_buffer(YY_CURRENT_BUFFER );
#ifndef yytext_ptr
static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
{
-
+
int i;
for ( i = 0; i < n; ++i )
s1[i] = s2[i];
void *dax_realloc (void * ptr, yy_size_t size )
{
-
+
/* The cast to (char *) in the following accommodates both
* implementations that use char* generic pointers, and those
* that use void* generic pointers. It works with the latter
