- **host/model:** :ref:`options_model_select`
-- **maxmin/precision:** :ref:`cfg=maxmin/precision`
- **maxmin/concurrency-limit:** :ref:`cfg=maxmin/concurrency-limit`
- **model-check:** :ref:`options_modelchecking`
- **storage/max_file_descriptors:** :ref:`cfg=storage/max_file_descriptors`
-- **surf/precision:** :ref:`cfg=surf/precision`
+- **precision/timing:** :ref:`cfg=precision/timing`
+- **precision/work-amount:** :ref:`cfg=precision/work-amount`
- **For collective operations of SMPI,** please refer to Section :ref:`cfg=smpi/coll-selector`
- **smpi/auto-shared-malloc-thresh:** :ref:`cfg=smpi/auto-shared-malloc-thresh`
<https://hal.inria.fr/inria-00071989/document>`_.
- **ns-3** (only available if you compiled SimGrid accordingly):
Use the packet-level network
- simulators as network models (see :ref:`model_ns3`).
+ simulators as network models (see :ref:`models_ns3`).
This model can be :ref:`further configured <options_pls>`.
-- ``cpu/model``: specify the used CPU model. We have only one model
- for now:
+- ``cpu/model``: specify the used CPU model. We have only one model for now:
- **Cas01:** Simplistic CPU model (time=size/speed)
-- ``host/model``: The host concept is the aggregation of a CPU with a
- network card. Three models exists, but actually, only 2 of them are
- interesting. The "compound" one is simply due to the way our
- internal code is organized, and can easily be ignored. So at the
- end, you have two host models: The default one allows aggregation of
- an existing CPU model with an existing network model, but does not
- allow parallel tasks because these beasts need some collaboration
- between the network and CPU model.
-
- - **default:** Default host model. Currently, CPU:Cas01 and
- network:LV08 (with cross traffic enabled)
- - **compound:** Host model that is automatically chosen if
- you change the network and CPU models
- - **ptask_L07:** Host model somehow similar to Cas01+CM02 but
- allowing "parallel tasks", that are intended to model the moldable
- tasks of the grid scheduling literature.
+- ``host/model``: we have two such models for now.
+
+ - **default:** Default host model. It simply uses the otherwise configured models for cpu, disk and network (i.e. CPU:Cas01,
+ disk:S19 and network:LV08 by default)
+ - **ptask_L07:** This model is mandatory if you plan to use parallel tasks (and useless otherwise). ptasks are intended to
+ model the moldable tasks of the grid scheduling literature. A specific host model is necessary because each such activity
+ has a both compute and communicate components, so the CPU and network models must be mixed together.
- ``storage/model``: specify the used storage model. Only one model is
provided so far.
The different models rely on a linear inequalities solver to share
the underlying resources. SimGrid allows you to change the solver, but
be cautious, **don't change it unless you are 100% sure**.
-
+
- items ``cpu/solver``, ``network/solver``, ``disk/solver`` and ``host/solver``
allow you to change the solver for each model:
and slow pattern that follows the actual dependencies.
.. _cfg=bmf/precision:
-.. _cfg=maxmin/precision:
-.. _cfg=surf/precision:
+.. _cfg=precision/timing:
+.. _cfg=precision/work-amount:
Numerical Precision
...................
-**Option** ``maxmin/precision`` **Default:** 1e-5 (in flops or bytes) |br|
-**Option** ``surf/precision`` **Default:** 1e-9 (in seconds) |br|
+**Option** ``precision/timing`` **Default:** 1e-9 (in seconds) |br|
+**Option** ``precision/work-amount`` **Default:** 1e-5 (in flops or bytes) |br|
**Option** ``bmf/precision`` **Default:** 1e-12 (no unit)
The analytical models handle a lot of floating point values. It is
**Option** ``network/TCP-gamma`` **Default:** 4194304
-The analytical models need to know the maximal TCP window size to take
-the TCP congestion mechanism into account. On Linux, this value can
-be retrieved using the following commands. Both give a set of values,
-and you should use the last one, which is the maximal size.
+The analytical models need to know the maximal TCP window size to take the TCP congestion mechanism into account (see
+:ref:`this page <understanding_cm02>` for details). On Linux, this value can be retrieved using the following commands.
+Both give a set of values, and you should use the last one, which is the maximal size.
.. code-block:: console
$ cat /proc/sys/net/ipv4/tcp_rmem # gives the sender window
$ cat /proc/sys/net/ipv4/tcp_wmem # gives the receiver window
+If you want to disable the TCP windowing mechanism, set this parameter to 0.
+
.. _cfg=network/bandwidth-factor:
.. _cfg=network/latency-factor:
.. _cfg=network/weight-S:
**Option** ``network/weight-S`` **Default:** depends on the model
Value used to account for RTT-unfairness when sharing a bottleneck (network connections with a large RTT are generally penalized
-against those with a small one). Described in `Accuracy Study and Improvement of Network Simulation in the SimGrid Framework
-<http://mescal.imag.fr/membres/arnaud.legrand/articles/simutools09.pdf>`_
+against those with a small one). See :ref:`models_TCP` and also this scientific paper: `Accuracy Study and Improvement of Network
+Simulation in the SimGrid Framework <http://mescal.imag.fr/membres/arnaud.legrand/articles/simutools09.pdf>`_
Default values for ``CM02`` is 0. ``LV08`` sets it to 20537 while both ``SMPI`` and ``IB`` set it to 8775.
InfiniBand network behavior can be modeled through 3 parameters
``smpi/IB-penalty-factors:"βe;βs;γs"``, as explained in `the PhD
-thesis of Jean-Marc Vincent
+thesis of Jérôme Vienne
<http://mescal.imag.fr/membres/jean-marc.vincent/index.html/PhD/Vienne.pdf>`_ (in French)
or more concisely in `this paper <https://hal.inria.fr/hal-00953618/document>`_,
even if that paper does only describe models for myrinet and ethernet.
the ``smpi/async-small-thresh`` item. The default value is 0. This
behavior can also be manually set for mailboxes, by setting the
receiving mode of the mailbox with a call to
-:cpp:func:`MSG_mailbox_set_async`. After this, all messages sent to
+:cpp:func:`sg_mailbox_set_receiver`. After this, all messages sent to
this mailbox will have this behavior regardless of the message size.
This value needs to be smaller than or equals to the threshold set at
Configuring SMPI
----------------
-The SMPI interface provides several specific configuration items.
+The SMPI interface provides several specific configuration items.
These are not easy to see with ``--help-cfg``, since SMPI binaries are usually launched through the ``smiprun`` script.
.. _cfg=smpi/host-speed:
