launching the tests
--setenv var=value : set a specific environment variable
--cfg arg : add parameter --cfg=arg to each command line
+ --log arg : add parameter --log=arg to each command line
--enable-coverage : ignore output lines starting with "profiling:"
+ --enable-sanitizers : ignore output lines starting with containing warnings
=head1 TEST SUITE FILE SYTAX
The solution is to prefix each line of your output with temporal
information so that lines can be grouped by timestamps. The
-lexicographical sort then only applies to lines that occured at the
+lexicographical sort then only applies to lines that occurred at the
same timestamp. Here is a SimGrid example:
# Sort only lines depending on the first 19 chars
}
my $enable_coverage = 0;
+my $enable_sanitizers = 0;
my $diff_tool = 0;
my $diff_tool_tmp_fh = 0;
my $diff_tool_tmp_filename = 0;
'timeout=s' => \$opts{'timeout'},
'setenv=s' => sub { setenv_cmd( $_[1] ) },
'cfg=s' => sub { $opts{'cfg'} .= " --cfg=$_[1]" },
+ 'log=s' => sub { $opts{'log'} .= " --log=$_[1]" },
'enable-coverage+' => \$enable_coverage,
+ 'enable-sanitizers+' => \$enable_sanitizers,
);
$tesh_file = pop @ARGV;
+$tesh_name = $tesh_file;
+$tesh_name =~ s|^.*?/([^/]*)$|$1|;
print "Enable coverage\n" if ($enable_coverage);
+print "Enable sanitizers\n" if ($enable_sanitizers);
if ($diff_tool) {
use File::Temp qw/ tempfile /;
}
if ( $tesh_file =~ m/(.*)\.tesh/ ) {
- $tesh_name = $1;
- print "Test suite `$tesh_name'\n";
+ print "Test suite `$tesh_file'\n";
} else {
- $tesh_file = "(stdin)";
$tesh_name = "(stdin)";
print "Test suite from stdin\n";
}
}
# substitute remaining variables, if any
- while ( $cmd{'cmd'} =~ /\${(\w+)(?::[=-][^}]*)?}/ ) {
+ while ( $cmd{'cmd'} =~ /\$\{(\w+)(?::[=-][^}]*)?\}/ ) {
$cmd{'cmd'} = var_subst( $cmd{'cmd'}, $1, "" );
}
while ( $cmd{'cmd'} =~ /\$(\w+)/ ) {
$cmd{'cmd'} = var_subst( $cmd{'cmd'}, $1, "" );
}
- # add cfg options
+ # add cfg and log options
$cmd{'cmd'} .= " $opts{'cfg'}"
if ( defined( $opts{'cfg'} ) && length( $opts{'cfg'} ) );
+ $cmd{'cmd'} .= " $opts{'log'}"
+ if ( defined( $opts{'log'} ) && length( $opts{'log'} ) );
# finally trim any remaining space chars
$cmd{'cmd'} =~ s/^\s+//;
###
# exec the command line
- my @cmdline = quotewords( '\s+', 0, $cmd{'cmd'} );
+ my @cmdline;
+ if(defined $ENV{VALGRIND_COMMAND}) {
+ push @cmdline, $ENV{VALGRIND_COMMAND};
+ push @cmdline, split(" ", $ENV{VALGRIND_OPTIONS});
+ if($cmd{'timeout'} ne 'no'){
+ $cmd{'timeout'}=$cmd{'timeout'}*20
+ }
+ }
+ push @cmdline, quotewords( '\s+', 0, $cmd{'cmd'} );
my $input = defined($cmd{'in'})? join("\n",@{$cmd{'in'}}) : "";
my $output = " " x 10240; $output = ""; # Preallocate 10kB, and reset length to 0
$cmd{'got'} = \$output;
eval {
finish( $cmd{'job'} );
};
- if ($@) { # deal with the errors that occured in the child process
+ if ($@) { # deal with the errors that occurred in the child process
if ($@ =~ /timeout/) {
$cmd{'job'}->kill_kill;
$cmd{'timeouted'} = 1;
chomp $got;
print $diff_tool_tmp_fh "> $got\n" if ($diff_tool);
- unless ( $enable_coverage and $got =~ /^profiling:/ ) {
+ unless (( $enable_coverage and $got =~ /^profiling:/ ) or
+ ( $enable_sanitizers and $got =~ m/WARNING: ASan doesn't fully support/))
+ {
push @got, $got;
- }
+ }
}
# How did the child process terminate?
# Did it end as expected?
if ( $cmd{'gotret'} ne $wantret ) {
$error = 1;
- my $msg = "Test suite `$cmd{'file'}': NOK (<$cmd{'file'}:$cmd{'line'}> $cmd{'gotret'})\n";
+ my $msg = "Test suite `$tesh_name': NOK (<$tesh_name:$cmd{'line'}> $cmd{'gotret'})\n";
if ( scalar @got ) {
- $msg = $msg . "Output of <$cmd{'file'}:$cmd{'line'}> so far:\n";
+ $msg = $msg . "Output of <$tesh_name:$cmd{'line'}> so far:\n";
map { $msg .= "|| $_\n" } @got;
} else {
- $msg .= "<$cmd{'file'}:$cmd{'line'}> No output so far.\n";
+ $msg .= "<$tesh_name:$cmd{'line'}> No output so far.\n";
}
print STDERR "$msg";
}
print "[Tesh/INFO] Here is the (ignored) command output:\n";
map { print "||$_\n" } @got;
} elsif ( defined( $cmd{'output ignore'} ) ) {
- print "(ignoring the output of <$cmd{'file'}:$cmd{'line'}> as requested)\n";
+ print "(ignoring the output of <$tesh_name:$cmd{'line'}> as requested)\n";
} else {
my $diff = build_diff( \@{ $cmd{'out'} }, \@got );
if ( length $diff ) {
- print "Output of <$cmd{'file'}:$cmd{'line'}> mismatch" . ( $cmd{'sort'} ? " (even after sorting)" : "" ) . ":\n";
+ print "Output of <$tesh_name:$cmd{'line'}> mismatch" . ( $cmd{'sort'} ? " (even after sorting)" : "" ) . ":\n";
map { print "$_\n" } split( /\n/, $diff );
if ( $cmd{'sort'} ) {
print "WARNING: Both the observed output and expected output were sorted as requested.\n";
# print "--------------->8---- End of the unprocessed observed output.\n";
}
- print "Test suite `$cmd{'file'}': NOK (<$cmd{'file'}:$cmd{'line'}> output mismatch)\n";
+ print "Test suite `$tesh_name': NOK (<$tesh_name:$cmd{'line'}> output mismatch)\n";
exit 2;
}
}
# parse tesh file
my $infh; # The file descriptor from which we should read the teshfile
-if ( $tesh_file eq "(stdin)" ) {
+if ( $tesh_name eq "(stdin)" ) {
$infh = *STDIN;
} else {
open $infh, $tesh_file
} else { # regular command
$cmd{'cmd'} = $arg;
- $cmd{'file'} = $tesh_file;
$cmd{'line'} = $line_num;
}
$cmd{'background'} = 1;
$cmd{'cmd'} = $arg;
- $cmd{'file'} = $tesh_file;
$cmd{'line'} = $line_num;
# Deal with the meta-commands
}
# We are done reading the input file
-close $infh unless ( $tesh_file eq "(stdin)" );
+close $infh unless ( $tesh_name eq "(stdin)" );
# Deal with last command, if any
if ( defined( $cmd{'cmd'} ) ) {
if ( $error != 0 ) {
exit $exitcode;
-} elsif ( $tesh_file eq "(stdin)" ) {
+} elsif ( $tesh_name eq "(stdin)" ) {
print "Test suite from stdin OK\n";
} else {
print "Test suite `$tesh_name' OK\n";
sub var_subst {
my ( $text, $name, $value ) = @_;
if ($value) {
- $text =~ s/\${$name(?::[=-][^}]*)?}/$value/g;
+ $text =~ s/\$\{$name(?::[=-][^}]*)?\}/$value/g;
$text =~ s/\$$name(\W|$)/$value$1/g;
} else {
- $text =~ s/\${$name:=([^}]*)}/$1/g;
- $text =~ s/\${$name}//g;
+ $text =~ s/\$\{$name:=([^}]*)\}/$1/g;
+ $text =~ s/\$\{$name\}//g;
$text =~ s/\$$name(\W|$)/$1/g;
}
return $text;
print "Chdir to $directory failed: No such file or directory\n";
}
if ( $failure == 1 ) {
- print "Test suite `$tesh_file': NOK (system error)\n";
+ print "Test suite `$tesh_name': NOK (system error)\n";
exit 4;
}
}
# Command setenv. Gets "variable=content", and update the environment accordingly
sub setenv_cmd($) {
my $arg = shift;
- if ( $arg =~ /^(.*)=(.*)$/ ) {
+ if ( $arg =~ /^(.*?)=(.*)$/ ) {
my ( $var, $ctn ) = ( $1, $2 );
print "[Tesh/INFO] setenv $var=$ctn\n";
$environ{$var} = $ctn;