#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 35
+#define YY_FLEX_MINOR_VERSION 6
+#define YY_FLEX_SUBMINOR_VERSION 0
#if YY_FLEX_SUBMINOR_VERSION > 0
#define FLEX_BETA
#endif
#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
+ * if you want the limit (max/min) macros for int types.
*/
#ifndef __STDC_LIMIT_MACROS
#define __STDC_LIMIT_MACROS 1
typedef signed char flex_int8_t;
typedef short int flex_int16_t;
typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
+typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
/* The "const" storage-class-modifier is valid. */
#define YY_USE_CONST
-#else /* ! __cplusplus */
+#else /* ! __cplusplus */
/* C99 requires __STDC__ to be defined as 1. */
#if defined (__STDC__)
#define YY_USE_CONST
-#endif /* defined (__STDC__) */
-#endif /* ! __cplusplus */
+#endif /* defined (__STDC__) */
+#endif /* ! __cplusplus */
#ifdef YY_USE_CONST
#define yyconst const
typedef struct yy_buffer_state *YY_BUFFER_STATE;
#endif
-extern int xbt_automaton_parser_leng;
+#ifndef YY_TYPEDEF_YY_SIZE_T
+#define YY_TYPEDEF_YY_SIZE_T
+typedef size_t yy_size_t;
+#endif
+
+extern yy_size_t xbt_automaton_parser_leng;
extern FILE *xbt_automaton_parser_in, *xbt_automaton_parser_out;
#define EOB_ACT_LAST_MATCH 2
#define YY_LESS_LINENO(n)
-
+ #define YY_LINENO_REWIND_TO(ptr)
+
/* Return all but the first "n" matched characters back to the input stream. */
#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up xbt_automaton_parser_text. */ \
+ do \
+ { \
+ /* Undo effects of setting up xbt_automaton_parser_text. */ \
int yyless_macro_arg = (n); \
YY_LESS_LINENO(yyless_macro_arg);\
- *yy_cp = (yy_hold_char); \
- YY_RESTORE_YY_MORE_OFFSET \
- (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up xbt_automaton_parser_text again */ \
- } \
- while ( 0 )
+ *yy_cp = (yy_hold_char); \
+ YY_RESTORE_YY_MORE_OFFSET \
+ (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
+ YY_DO_BEFORE_ACTION; /* set up xbt_automaton_parser_text again */ \
+ } \
+ while ( 0 )
#define unput(c) yyunput( c, (yytext_ptr) )
-#ifndef YY_TYPEDEF_YY_SIZE_T
-#define YY_TYPEDEF_YY_SIZE_T
-typedef size_t yy_size_t;
-#endif
-
#ifndef YY_STRUCT_YY_BUFFER_STATE
#define YY_STRUCT_YY_BUFFER_STATE
struct yy_buffer_state
- {
- FILE *yy_input_file;
-
- char *yy_ch_buf; /* input buffer */
- char *yy_buf_pos; /* current position in input buffer */
-
- /* Size of input buffer in bytes, not including room for EOB
- * characters.
- */
- yy_size_t yy_buf_size;
-
- /* Number of characters read into yy_ch_buf, not including EOB
- * characters.
- */
- int yy_n_chars;
-
- /* Whether we "own" the buffer - i.e., we know we created it,
- * and can realloc() it to grow it, and should free() it to
- * delete it.
- */
- int yy_is_our_buffer;
-
- /* Whether this is an "interactive" input source; if so, and
- * if we're using stdio for input, then we want to use getc()
- * instead of fread(), to make sure we stop fetching input after
- * each newline.
- */
- int yy_is_interactive;
-
- /* Whether we're considered to be at the beginning of a line.
- * If so, '^' rules will be active on the next match, otherwise
- * not.
- */
- int yy_at_bol;
+ {
+ FILE *yy_input_file;
+
+ char *yy_ch_buf; /* input buffer */
+ char *yy_buf_pos; /* current position in input buffer */
+
+ /* Size of input buffer in bytes, not including room for EOB
+ * characters.
+ */
+ yy_size_t yy_buf_size;
+
+ /* Number of characters read into yy_ch_buf, not including EOB
+ * characters.
+ */
+ int yy_n_chars;
+
+ /* Whether we "own" the buffer - i.e., we know we created it,
+ * and can realloc() it to grow it, and should free() it to
+ * delete it.
+ */
+ int yy_is_our_buffer;
+
+ /* Whether this is an "interactive" input source; if so, and
+ * if we're using stdio for input, then we want to use getc()
+ * instead of fread(), to make sure we stop fetching input after
+ * each newline.
+ */
+ int yy_is_interactive;
+
+ /* Whether we're considered to be at the beginning of a line.
+ * If so, '^' rules will be active on the next match, otherwise
+ * not.
+ */
+ int yy_at_bol;
int yy_bs_lineno; /**< The line count. */
int yy_bs_column; /**< The column count. */
-
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
- int yy_buffer_status;
+ /* Whether to try to fill the input buffer when we reach the
+ * end of it.
+ */
+ int yy_fill_buffer;
+
+ int yy_buffer_status;
#define YY_BUFFER_NEW 0
#define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
- * then we mark the buffer as YY_EOF_PENDING, to indicate that we
- * shouldn't try reading from the input source any more. We might
- * still have a bunch of tokens to match, though, because of
- * possible backing-up.
- *
- * When we actually see the EOF, we change the status to "new"
- * (via xbt_automaton_parser_restart()), so that the user can continue scanning by
- * just pointing xbt_automaton_parser_in at a new input file.
- */
+ /* When an EOF's been seen but there's still some text to process
+ * then we mark the buffer as YY_EOF_PENDING, to indicate that we
+ * shouldn't try reading from the input source any more. We might
+ * still have a bunch of tokens to match, though, because of
+ * possible backing-up.
+ *
+ * When we actually see the EOF, we change the status to "new"
+ * (via xbt_automaton_parser_restart()), so that the user can continue scanning by
+ * just pointing xbt_automaton_parser_in at a new input file.
+ */
#define YY_BUFFER_EOF_PENDING 2
- };
+ };
#endif /* !YY_STRUCT_YY_BUFFER_STATE */
/* Stack of input buffers. */
/* yy_hold_char holds the character lost when xbt_automaton_parser_text is formed. */
static char yy_hold_char;
-static int yy_n_chars; /* number of characters read into yy_ch_buf */
-int xbt_automaton_parser_leng;
+static int yy_n_chars; /* number of characters read into yy_ch_buf */
+yy_size_t xbt_automaton_parser_leng;
/* Points to current character in buffer. */
static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 0; /* whether we need to initialize */
-static int yy_start = 0; /* start state number */
+static int yy_init = 0; /* whether we need to initialize */
+static int yy_start = 0; /* start state number */
/* Flag which is used to allow xbt_automaton_parser_wrap()'s to do buffer switches
* instead of setting up a fresh xbt_automaton_parser_in. A bit of a hack ...
YY_BUFFER_STATE xbt_automaton_parser__scan_buffer (char *base,yy_size_t size );
YY_BUFFER_STATE xbt_automaton_parser__scan_string (yyconst char *yy_str );
-YY_BUFFER_STATE xbt_automaton_parser__scan_bytes (yyconst char *bytes,int len );
+YY_BUFFER_STATE xbt_automaton_parser__scan_bytes (yyconst char *bytes,yy_size_t len );
void *xbt_automaton_parser_alloc (yy_size_t );
void *xbt_automaton_parser_realloc (void *,yy_size_t );
#define yy_new_buffer xbt_automaton_parser__create_buffer
#define yy_set_interactive(is_interactive) \
- { \
- if ( ! YY_CURRENT_BUFFER ){ \
+ { \
+ if ( ! YY_CURRENT_BUFFER ){ \
xbt_automaton_parser_ensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
+ YY_CURRENT_BUFFER_LVALUE = \
xbt_automaton_parser__create_buffer(xbt_automaton_parser_in,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
- }
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
+ }
#define yy_set_bol(at_bol) \
- { \
- if ( ! YY_CURRENT_BUFFER ){\
+ { \
+ if ( ! YY_CURRENT_BUFFER ){\
xbt_automaton_parser_ensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
+ YY_CURRENT_BUFFER_LVALUE = \
xbt_automaton_parser__create_buffer(xbt_automaton_parser_in,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
- }
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
+ }
#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
/* Begin user sect3 */
-#define xbt_automaton_parser_wrap(n) 1
+#define xbt_automaton_parser_wrap() (/*CONSTCOND*/1)
#define YY_SKIP_YYWRAP
typedef unsigned char YY_CHAR;
int xbt_automaton_parser_lineno = 1;
extern char *xbt_automaton_parser_text;
+#ifdef yytext_ptr
+#undef yytext_ptr
+#endif
#define yytext_ptr xbt_automaton_parser_text
static yy_state_type yy_get_previous_state (void );
static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
static int yy_get_next_buffer (void );
+#if defined(__GNUC__) && __GNUC__ >= 3
+__attribute__((__noreturn__))
+#endif
static void yy_fatal_error (yyconst char msg[] );
/* Done after the current pattern has been matched and before the
* corresponding action - sets up xbt_automaton_parser_text.
*/
#define YY_DO_BEFORE_ACTION \
- (yytext_ptr) = yy_bp; \
- xbt_automaton_parser_leng = (size_t) (yy_cp - yy_bp); \
- (yy_hold_char) = *yy_cp; \
- *yy_cp = '\0'; \
- (yy_c_buf_p) = yy_cp;
+ (yytext_ptr) = yy_bp; \
+ xbt_automaton_parser_leng = (size_t) (yy_cp - yy_bp); \
+ (yy_hold_char) = *yy_cp; \
+ *yy_cp = '\0'; \
+ (yy_c_buf_p) = yy_cp;
#define YY_NUM_RULES 25
#define YY_END_OF_BUFFER 26
/* This struct is not used in this scanner,
but its presence is necessary. */
struct yy_trans_info
- {
- flex_int32_t yy_verify;
- flex_int32_t yy_nxt;
- };
+ {
+ flex_int32_t yy_verify;
+ flex_int32_t yy_nxt;
+ };
static yyconst flex_int16_t yy_accept[54] =
{ 0,
0, 0, 26, 24, 18, 23, 8, 24, 24, 9,
22, 1, 0
} ;
-static yyconst flex_int32_t yy_ec[256] =
+static yyconst YY_CHAR yy_ec[256] =
{ 0,
1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1
} ;
-static yyconst flex_int32_t yy_meta[34] =
+static yyconst YY_CHAR yy_meta[34] =
{ 0,
1, 1, 2, 2, 1, 2, 1, 1, 1, 1,
1, 1, 3, 4, 4, 1, 1, 1, 4, 2,
1, 1, 1
} ;
-static yyconst flex_int16_t yy_base[57] =
+static yyconst flex_uint16_t yy_base[57] =
{ 0,
0, 0, 89, 90, 32, 90, 90, 34, 81, 90,
90, 69, 76, 27, 31, 69, 90, 0, 59, 56,
55, 55, 0, 53, 53, 53
} ;
-static yyconst flex_int16_t yy_nxt[124] =
+static yyconst flex_uint16_t yy_nxt[124] =
{ 0,
4, 5, 6, 5, 7, 8, 9, 10, 11, 4,
12, 4, 13, 14, 15, 16, 17, 4, 18, 4,
#define YY_RESTORE_YY_MORE_OFFSET
char *xbt_automaton_parser_text;
#line 1 "parserPromela.lex"
-#line 4 "parserPromela.lex"
-
+/* Copyright (c) 2012, 2014. The SimGrid Team.
+ * All rights reserved. */
+/* This program is free software; you can redistribute it and/or modify it
+ * under the terms of the license (GNU LGPL) which comes with this package. */
+#line 10 "parserPromela.lex"
+
+#include "simgrid_config.h"
+#if !HAVE_UNISTD_H
+#define YY_NO_UNISTD_H /* hello Windows */
+#endif
#include <stdio.h>
#include "parserPromela.tab.hacc"
-
+
extern YYSTYPE yylval;
-
-#line 533 "automaton_lexer.yy.c"
+
+#line 548 "automaton_lexer.yy.c"
#define INITIAL 0
FILE *xbt_automaton_parser_get_in (void );
-void xbt_automaton_parser_set_in (FILE * in_str );
+void xbt_automaton_parser_set_in (FILE * _in_str );
FILE *xbt_automaton_parser_get_out (void );
-void xbt_automaton_parser_set_out (FILE * out_str );
+void xbt_automaton_parser_set_out (FILE * _out_str );
-int xbt_automaton_parser_get_leng (void );
+yy_size_t xbt_automaton_parser_get_leng (void );
char *xbt_automaton_parser_get_text (void );
int xbt_automaton_parser_get_lineno (void );
-void xbt_automaton_parser_set_lineno (int line_number );
+void xbt_automaton_parser_set_lineno (int _line_number );
/* Macros after this point can all be overridden by user definitions in
* section 1.
#endif
#endif
+#ifndef YY_NO_UNPUT
+
static void yyunput (int c,char *buf_ptr );
-
+
+#endif
+
#ifndef yytext_ptr
static void yy_flex_strncpy (char *,yyconst char *,int );
#endif
*/
#ifndef YY_INPUT
#define YY_INPUT(buf,result,max_size) \
- if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
- { \
- int c = '*'; \
- size_t n; \
- for ( n = 0; n < max_size && \
- (c = getc( xbt_automaton_parser_in )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
- if ( c == '\n' ) \
- buf[n++] = (char) c; \
- if ( c == EOF && ferror( xbt_automaton_parser_in ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } \
- else \
- { \
- errno=0; \
- while ( (result = fread(buf, 1, max_size, xbt_automaton_parser_in))==0 && ferror(xbt_automaton_parser_in)) \
- { \
- if( errno != EINTR) \
- { \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- break; \
- } \
- errno=0; \
- clearerr(xbt_automaton_parser_in); \
- } \
- }\
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
+ { \
+ int c = '*'; \
+ size_t n; \
+ for ( n = 0; n < max_size && \
+ (c = getc( xbt_automaton_parser_in )) != EOF && c != '\n'; ++n ) \
+ buf[n] = (char) c; \
+ if ( c == '\n' ) \
+ buf[n++] = (char) c; \
+ if ( c == EOF && ferror( xbt_automaton_parser_in ) ) \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ result = n; \
+ } \
+ else \
+ { \
+ errno=0; \
+ while ( (result = fread(buf, 1, max_size, xbt_automaton_parser_in))==0 && ferror(xbt_automaton_parser_in)) \
+ { \
+ if( errno != EINTR) \
+ { \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ break; \
+ } \
+ errno=0; \
+ clearerr(xbt_automaton_parser_in); \
+ } \
+ }\
\
#endif
/* Code executed at the end of each rule. */
#ifndef YY_BREAK
-#define YY_BREAK break;
+#define YY_BREAK /*LINTED*/break;
#endif
#define YY_RULE_SETUP \
- YY_USER_ACTION
+ YY_USER_ACTION
/** The main scanner function which does all the work.
*/
YY_DECL
{
- register yy_state_type yy_current_state;
- register char *yy_cp, *yy_bp;
- register int yy_act;
-
-#line 28 "parserPromela.lex"
-
-
-#line 723 "automaton_lexer.yy.c"
+ yy_state_type yy_current_state;
+ char *yy_cp, *yy_bp;
+ int yy_act;
- if ( !(yy_init) )
- {
- (yy_init) = 1;
+ if ( !(yy_init) )
+ {
+ (yy_init) = 1;
#ifdef YY_USER_INIT
- YY_USER_INIT;
+ YY_USER_INIT;
#endif
- if ( ! (yy_start) )
- (yy_start) = 1; /* first start state */
+ if ( ! (yy_start) )
+ (yy_start) = 1; /* first start state */
- if ( ! xbt_automaton_parser_in )
- xbt_automaton_parser_in = stdin;
+ if ( ! xbt_automaton_parser_in )
+ xbt_automaton_parser_in = stdin;
- if ( ! xbt_automaton_parser_out )
- xbt_automaton_parser_out = stdout;
+ if ( ! xbt_automaton_parser_out )
+ xbt_automaton_parser_out = stdout;
- if ( ! YY_CURRENT_BUFFER ) {
- xbt_automaton_parser_ensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- xbt_automaton_parser__create_buffer(xbt_automaton_parser_in,YY_BUF_SIZE );
- }
+ if ( ! YY_CURRENT_BUFFER ) {
+ xbt_automaton_parser_ensure_buffer_stack ();
+ YY_CURRENT_BUFFER_LVALUE =
+ xbt_automaton_parser__create_buffer(xbt_automaton_parser_in,YY_BUF_SIZE );
+ }
- xbt_automaton_parser__load_buffer_state( );
- }
+ xbt_automaton_parser__load_buffer_state( );
+ }
- while ( 1 ) /* loops until end-of-file is reached */
- {
- yy_cp = (yy_c_buf_p);
+ {
+#line 38 "parserPromela.lex"
- /* Support of xbt_automaton_parser_text. */
- *yy_cp = (yy_hold_char);
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
+#line 769 "automaton_lexer.yy.c"
+
+ while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */
+ {
+ yy_cp = (yy_c_buf_p);
- yy_current_state = (yy_start);
+ /* Support of xbt_automaton_parser_text. */
+ *yy_cp = (yy_hold_char);
+
+ /* yy_bp points to the position in yy_ch_buf of the start of
+ * the current run.
+ */
+ yy_bp = yy_cp;
+
+ yy_current_state = (yy_start);
yy_match:
- do
- {
- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 54 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- ++yy_cp;
- }
- while ( yy_base[yy_current_state] != 90 );
+ do
+ {
+ YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ;
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 54 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ ++yy_cp;
+ }
+ while ( yy_base[yy_current_state] != 90 );
yy_find_action:
- yy_act = yy_accept[yy_current_state];
- if ( yy_act == 0 )
- { /* have to back up */
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- yy_act = yy_accept[yy_current_state];
- }
-
- YY_DO_BEFORE_ACTION;
-
-do_action: /* This label is used only to access EOF actions. */
-
- switch ( yy_act )
- { /* beginning of action switch */
- case 0: /* must back up */
- /* undo the effects of YY_DO_BEFORE_ACTION */
- *yy_cp = (yy_hold_char);
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- goto yy_find_action;
+ yy_act = yy_accept[yy_current_state];
+ if ( yy_act == 0 )
+ { /* have to back up */
+ yy_cp = (yy_last_accepting_cpos);
+ yy_current_state = (yy_last_accepting_state);
+ yy_act = yy_accept[yy_current_state];
+ }
+
+ YY_DO_BEFORE_ACTION;
+
+do_action: /* This label is used only to access EOF actions. */
+
+ switch ( yy_act )
+ { /* beginning of action switch */
+ case 0: /* must back up */
+ /* undo the effects of YY_DO_BEFORE_ACTION */
+ *yy_cp = (yy_hold_char);
+ yy_cp = (yy_last_accepting_cpos);
+ yy_current_state = (yy_last_accepting_state);
+ goto yy_find_action;
case 1:
YY_RULE_SETUP
-#line 30 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (NEVER); }
- YY_BREAK
+#line 40 "parserPromela.lex"
+{ return (NEVER); }
+ YY_BREAK
case 2:
YY_RULE_SETUP
-#line 31 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (IF); }
- YY_BREAK
+#line 41 "parserPromela.lex"
+{ return (IF); }
+ YY_BREAK
case 3:
YY_RULE_SETUP
-#line 32 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text);
- return (FI); }
- YY_BREAK
+#line 42 "parserPromela.lex"
+{ return (FI); }
+ YY_BREAK
case 4:
YY_RULE_SETUP
-#line 34 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (IMPLIES); }
- YY_BREAK
+#line 43 "parserPromela.lex"
+{ return (IMPLIES); }
+ YY_BREAK
case 5:
YY_RULE_SETUP
-#line 35 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (GOTO); }
- YY_BREAK
+#line 44 "parserPromela.lex"
+{ return (GOTO); }
+ YY_BREAK
case 6:
YY_RULE_SETUP
-#line 36 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (AND); }
- YY_BREAK
+#line 45 "parserPromela.lex"
+{ return (AND); }
+ YY_BREAK
case 7:
YY_RULE_SETUP
-#line 37 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (OR); }
- YY_BREAK
+#line 46 "parserPromela.lex"
+{ return (OR); }
+ YY_BREAK
case 8:
YY_RULE_SETUP
-#line 38 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (NOT); }
- YY_BREAK
+#line 47 "parserPromela.lex"
+{ return (NOT); }
+ YY_BREAK
case 9:
YY_RULE_SETUP
-#line 39 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (LEFT_PAR); }
- YY_BREAK
+#line 48 "parserPromela.lex"
+{ return (LEFT_PAR); }
+ YY_BREAK
case 10:
YY_RULE_SETUP
-#line 40 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (RIGHT_PAR); }
- YY_BREAK
+#line 49 "parserPromela.lex"
+{ return (RIGHT_PAR); }
+ YY_BREAK
case 11:
YY_RULE_SETUP
-#line 41 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (CASE); }
- YY_BREAK
+#line 50 "parserPromela.lex"
+{ return (CASE); }
+ YY_BREAK
case 12:
YY_RULE_SETUP
-#line 42 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (COLON); }
- YY_BREAK
+#line 51 "parserPromela.lex"
+{ return (COLON); }
+ YY_BREAK
case 13:
YY_RULE_SETUP
-#line 43 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (SEMI_COLON); }
- YY_BREAK
+#line 52 "parserPromela.lex"
+{ return (SEMI_COLON); }
+ YY_BREAK
case 14:
YY_RULE_SETUP
-#line 44 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (CASE_TRUE); }
- YY_BREAK
+#line 53 "parserPromela.lex"
+{ return (CASE_TRUE); }
+ YY_BREAK
case 15:
YY_RULE_SETUP
-#line 45 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (LEFT_BRACE); }
- YY_BREAK
+#line 54 "parserPromela.lex"
+{ return (LEFT_BRACE); }
+ YY_BREAK
case 16:
YY_RULE_SETUP
-#line 46 "parserPromela.lex"
-{ printf("%s", xbt_automaton_parser_text); return (RIGHT_BRACE); }
- YY_BREAK
+#line 55 "parserPromela.lex"
+{ return (RIGHT_BRACE); }
+ YY_BREAK
case 17:
/* rule 17 can match eol */
YY_RULE_SETUP
-#line 49 "parserPromela.lex"
-{ printf(" ");}
- YY_BREAK
+#line 58 "parserPromela.lex"
+{ }
+ YY_BREAK
case 18:
YY_RULE_SETUP
-#line 51 "parserPromela.lex"
-{ printf("%s",xbt_automaton_parser_text); }
- YY_BREAK
+#line 60 "parserPromela.lex"
+{ }
+ YY_BREAK
case 19:
YY_RULE_SETUP
-#line 54 "parserPromela.lex"
-{ printf("%s",xbt_automaton_parser_text);
- sscanf(xbt_automaton_parser_text,"%lf",&yylval.real);
+#line 63 "parserPromela.lex"
+{ sscanf(xbt_automaton_parser_text,"%lf",&yylval.real);
return (LITT_REEL); }
- YY_BREAK
+ YY_BREAK
case 20:
YY_RULE_SETUP
-#line 58 "parserPromela.lex"
-{ printf("%s",xbt_automaton_parser_text);
- sscanf(xbt_automaton_parser_text,"%d",&yylval.integer);
+#line 66 "parserPromela.lex"
+{ sscanf(xbt_automaton_parser_text,"%d",&yylval.integer);
return (LITT_ENT); }
- YY_BREAK
+ YY_BREAK
case 21:
/* rule 21 can match eol */
YY_RULE_SETUP
-#line 62 "parserPromela.lex"
-{ printf("%s",xbt_automaton_parser_text);
- yylval.string=(char *)malloc(strlen(xbt_automaton_parser_text)+1);
- sscanf(xbt_automaton_parser_text,"%s",yylval.string);
+#line 69 "parserPromela.lex"
+{ yylval.string=(char *)malloc(strlen(xbt_automaton_parser_text)+1);
+ sscanf(xbt_automaton_parser_text,"%s",yylval.string);
return (LITT_CHAINE); }
- YY_BREAK
+ YY_BREAK
case 22:
YY_RULE_SETUP
-#line 67 "parserPromela.lex"
-{ printf("%s",xbt_automaton_parser_text);
- yylval.string=(char *)malloc(strlen(xbt_automaton_parser_text)+1);
- sscanf(xbt_automaton_parser_text,"%s",yylval.string);
- return (ID); }
- YY_BREAK
+#line 73 "parserPromela.lex"
+{ yylval.string=(char *)malloc(strlen(xbt_automaton_parser_text)+1);
+ sscanf(xbt_automaton_parser_text,"%s",yylval.string);
+ return (ID); }
+ YY_BREAK
case 23:
/* rule 23 can match eol */
YY_RULE_SETUP
-#line 72 "parserPromela.lex"
-{ printf("\n"); }
- YY_BREAK
+#line 77 "parserPromela.lex"
+{ }
+ YY_BREAK
case 24:
YY_RULE_SETUP
-#line 74 "parserPromela.lex"
-{ printf("caractère inconnu\n"); }
- YY_BREAK
+#line 79 "parserPromela.lex"
+{ }
+ YY_BREAK
case 25:
YY_RULE_SETUP
-#line 76 "parserPromela.lex"
+#line 81 "parserPromela.lex"
ECHO;
- YY_BREAK
-#line 945 "automaton_lexer.yy.c"
+ YY_BREAK
+#line 960 "automaton_lexer.yy.c"
case YY_STATE_EOF(INITIAL):
- yyterminate();
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
- int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
- *yy_cp = (yy_hold_char);
- YY_RESTORE_YY_MORE_OFFSET
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed xbt_automaton_parser_in at a new source and called
- * xbt_automaton_parser_lex(). If so, then we have to assure
- * consistency between YY_CURRENT_BUFFER and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- YY_CURRENT_BUFFER_LVALUE->yy_input_file = xbt_automaton_parser_in;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
- * of the first EOB in the buffer, since yy_c_buf_p will
- * already have been incremented past the NUL character
- * (since all states make transitions on EOB to the
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
- if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
- (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
- * yy_get_previous_state() go ahead and do it
- * for us because it doesn't know how to deal
- * with the possibility of jamming (and we don't
- * want to build jamming into it because then it
- * will run more slowly).
- */
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
- yy_cp = ++(yy_c_buf_p);
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
- yy_cp = (yy_c_buf_p);
- goto yy_find_action;
- }
- }
-
- else switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_END_OF_FILE:
- {
- (yy_did_buffer_switch_on_eof) = 0;
-
- if ( xbt_automaton_parser_wrap( ) )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
- * xbt_automaton_parser_text, we can now set up
- * yy_c_buf_p so that if some total
- * hoser (like flex itself) wants to
- * call the scanner after we return the
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
- (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
- }
-
- else
- {
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) =
- (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
- (yy_c_buf_p) =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
- }
-
- default:
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
+ yyterminate();
+
+ case YY_END_OF_BUFFER:
+ {
+ /* Amount of text matched not including the EOB char. */
+ int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
+
+ /* Undo the effects of YY_DO_BEFORE_ACTION. */
+ *yy_cp = (yy_hold_char);
+ YY_RESTORE_YY_MORE_OFFSET
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
+ {
+ /* We're scanning a new file or input source. It's
+ * possible that this happened because the user
+ * just pointed xbt_automaton_parser_in at a new source and called
+ * xbt_automaton_parser_lex(). If so, then we have to assure
+ * consistency between YY_CURRENT_BUFFER and our
+ * globals. Here is the right place to do so, because
+ * this is the first action (other than possibly a
+ * back-up) that will match for the new input source.
+ */
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ YY_CURRENT_BUFFER_LVALUE->yy_input_file = xbt_automaton_parser_in;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
+ }
+
+ /* Note that here we test for yy_c_buf_p "<=" to the position
+ * of the first EOB in the buffer, since yy_c_buf_p will
+ * already have been incremented past the NUL character
+ * (since all states make transitions on EOB to the
+ * end-of-buffer state). Contrast this with the test
+ * in input().
+ */
+ if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ { /* This was really a NUL. */
+ yy_state_type yy_next_state;
+
+ (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ /* Okay, we're now positioned to make the NUL
+ * transition. We couldn't have
+ * yy_get_previous_state() go ahead and do it
+ * for us because it doesn't know how to deal
+ * with the possibility of jamming (and we don't
+ * want to build jamming into it because then it
+ * will run more slowly).
+ */
+
+ yy_next_state = yy_try_NUL_trans( yy_current_state );
+
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+
+ if ( yy_next_state )
+ {
+ /* Consume the NUL. */
+ yy_cp = ++(yy_c_buf_p);
+ yy_current_state = yy_next_state;
+ goto yy_match;
+ }
+
+ else
+ {
+ yy_cp = (yy_c_buf_p);
+ goto yy_find_action;
+ }
+ }
+
+ else switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_END_OF_FILE:
+ {
+ (yy_did_buffer_switch_on_eof) = 0;
+
+ if ( xbt_automaton_parser_wrap( ) )
+ {
+ /* Note: because we've taken care in
+ * yy_get_next_buffer() to have set up
+ * xbt_automaton_parser_text, we can now set up
+ * yy_c_buf_p so that if some total
+ * hoser (like flex itself) wants to
+ * call the scanner after we return the
+ * YY_NULL, it'll still work - another
+ * YY_NULL will get returned.
+ */
+ (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
+
+ yy_act = YY_STATE_EOF(YY_START);
+ goto do_action;
+ }
+
+ else
+ {
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+ }
+ break;
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) =
+ (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_match;
+
+ case EOB_ACT_LAST_MATCH:
+ (yy_c_buf_p) =
+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_find_action;
+ }
+ break;
+ }
+
+ default:
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--no action found" );
+ } /* end of action switch */
+ } /* end of scanning one token */
+ } /* end of user's declarations */
} /* end of xbt_automaton_parser_lex */
/* yy_get_next_buffer - try to read in a new buffer
*
* Returns a code representing an action:
- * EOB_ACT_LAST_MATCH -
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
+ * EOB_ACT_LAST_MATCH -
+ * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
+ * EOB_ACT_END_OF_FILE - end of file
*/
static int yy_get_next_buffer (void)
{
- register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
- register char *source = (yytext_ptr);
- register int number_to_move, i;
- int ret_val;
-
- if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
- if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
- */
- return EOB_ACT_END_OF_FILE;
- }
-
- else
- {
- /* We matched some text prior to the EOB, first
- * process it.
- */
- return EOB_ACT_LAST_MATCH;
- }
- }
-
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
- number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
- else
- {
- int num_to_read =
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
-
- /* just a shorter name for the current buffer */
- YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
-
- int yy_c_buf_p_offset =
- (int) ((yy_c_buf_p) - b->yy_ch_buf);
-
- if ( b->yy_is_our_buffer )
- {
- int new_size = b->yy_buf_size * 2;
-
- if ( new_size <= 0 )
- b->yy_buf_size += b->yy_buf_size / 8;
- else
- b->yy_buf_size *= 2;
-
- b->yy_ch_buf = (char *)
- /* Include room in for 2 EOB chars. */
- xbt_automaton_parser_realloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
- }
- else
- /* Can't grow it, we don't own it. */
- b->yy_ch_buf = 0;
-
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR(
- "fatal error - scanner input buffer overflow" );
-
- (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
-
- num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
- number_to_move - 1;
-
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
- YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), (size_t) num_to_read );
-
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- if ( (yy_n_chars) == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
- xbt_automaton_parser_restart(xbt_automaton_parser_in );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
- if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
- /* Extend the array by 50%, plus the number we really need. */
- yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) xbt_automaton_parser_realloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
- if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
- }
-
- (yy_n_chars) += number_to_move;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
- (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
+ char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
+ char *source = (yytext_ptr);
+ yy_size_t number_to_move, i;
+ int ret_val;
+
+ if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--end of buffer missed" );
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
+ { /* Don't try to fill the buffer, so this is an EOF. */
+ if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
+ {
+ /* We matched a single character, the EOB, so
+ * treat this as a final EOF.
+ */
+ return EOB_ACT_END_OF_FILE;
+ }
+
+ else
+ {
+ /* We matched some text prior to the EOB, first
+ * process it.
+ */
+ return EOB_ACT_LAST_MATCH;
+ }
+ }
+
+ /* Try to read more data. */
+
+ /* First move last chars to start of buffer. */
+ number_to_move = (yy_size_t) ((yy_c_buf_p) - (yytext_ptr)) - 1;
+
+ for ( i = 0; i < number_to_move; ++i )
+ *(dest++) = *(source++);
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
+ /* don't do the read, it's not guaranteed to return an EOF,
+ * just force an EOF
+ */
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
+
+ else
+ {
+ yy_size_t num_to_read =
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
+
+ while ( num_to_read <= 0 )
+ { /* Not enough room in the buffer - grow it. */
+
+ /* just a shorter name for the current buffer */
+ YY_BUFFER_STATE b = YY_CURRENT_BUFFER_LVALUE;
+
+ int yy_c_buf_p_offset =
+ (int) ((yy_c_buf_p) - b->yy_ch_buf);
+
+ if ( b->yy_is_our_buffer )
+ {
+ yy_size_t new_size = b->yy_buf_size * 2;
+
+ if ( new_size <= 0 )
+ b->yy_buf_size += b->yy_buf_size / 8;
+ else
+ b->yy_buf_size *= 2;
+
+ b->yy_ch_buf = (char *)
+ /* Include room in for 2 EOB chars. */
+ xbt_automaton_parser_realloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
+ }
+ else
+ /* Can't grow it, we don't own it. */
+ b->yy_ch_buf = 0;
+
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR(
+ "fatal error - scanner input buffer overflow" );
+
+ (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
+
+ num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
+ number_to_move - 1;
+
+ }
+
+ if ( num_to_read > YY_READ_BUF_SIZE )
+ num_to_read = YY_READ_BUF_SIZE;
- return ret_val;
+ /* Read in more data. */
+ YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
+ (yy_n_chars), num_to_read );
+
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ if ( (yy_n_chars) == 0 )
+ {
+ if ( number_to_move == YY_MORE_ADJ )
+ {
+ ret_val = EOB_ACT_END_OF_FILE;
+ xbt_automaton_parser_restart(xbt_automaton_parser_in );
+ }
+
+ else
+ {
+ ret_val = EOB_ACT_LAST_MATCH;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
+ YY_BUFFER_EOF_PENDING;
+ }
+ }
+
+ else
+ ret_val = EOB_ACT_CONTINUE_SCAN;
+
+ if ((int) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+ /* Extend the array by 50%, plus the number we really need. */
+ int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) xbt_automaton_parser_realloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
+ if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+ }
+
+ (yy_n_chars) += number_to_move;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
+
+ (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
+
+ return ret_val;
}
/* yy_get_previous_state - get the state just before the EOB char was reached */
static yy_state_type yy_get_previous_state (void)
{
- register yy_state_type yy_current_state;
- register char *yy_cp;
-
- yy_current_state = (yy_start);
-
- for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
- {
- register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 54 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- }
-
- return yy_current_state;
+ yy_state_type yy_current_state;
+ char *yy_cp;
+
+ yy_current_state = (yy_start);
+
+ for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
+ {
+ YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 54 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ }
+
+ return yy_current_state;
}
/* yy_try_NUL_trans - try to make a transition on the NUL character
*
* synopsis
- * next_state = yy_try_NUL_trans( current_state );
+ * next_state = yy_try_NUL_trans( current_state );
*/
static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
{
- register int yy_is_jam;
- register char *yy_cp = (yy_c_buf_p);
-
- register YY_CHAR yy_c = 1;
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 54 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- yy_is_jam = (yy_current_state == 53);
-
- return yy_is_jam ? 0 : yy_current_state;
+ int yy_is_jam;
+ char *yy_cp = (yy_c_buf_p);
+
+ YY_CHAR yy_c = 1;
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 54 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ yy_is_jam = (yy_current_state == 53);
+
+ return yy_is_jam ? 0 : yy_current_state;
}
- static void yyunput (int c, register char * yy_bp )
+#ifndef YY_NO_UNPUT
+
+ static void yyunput (int c, char * yy_bp )
{
- register char *yy_cp;
-
+ char *yy_cp;
+
yy_cp = (yy_c_buf_p);
- /* undo effects of setting up xbt_automaton_parser_text */
- *yy_cp = (yy_hold_char);
+ /* undo effects of setting up xbt_automaton_parser_text */
+ *yy_cp = (yy_hold_char);
- if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
- { /* need to shift things up to make room */
- /* +2 for EOB chars. */
- register int number_to_move = (yy_n_chars) + 2;
- register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
- register char *source =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
+ if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
+ { /* need to shift things up to make room */
+ /* +2 for EOB chars. */
+ yy_size_t number_to_move = (yy_n_chars) + 2;
+ char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
+ char *source =
+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
- while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- *--dest = *--source;
+ while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ *--dest = *--source;
- yy_cp += (int) (dest - source);
- yy_bp += (int) (dest - source);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
+ yy_cp += (int) (dest - source);
+ yy_bp += (int) (dest - source);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
- if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
- YY_FATAL_ERROR( "flex scanner push-back overflow" );
- }
+ if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
+ YY_FATAL_ERROR( "flex scanner push-back overflow" );
+ }
- *--yy_cp = (char) c;
+ *--yy_cp = (char) c;
- (yytext_ptr) = yy_bp;
- (yy_hold_char) = *yy_cp;
- (yy_c_buf_p) = yy_cp;
+ (yytext_ptr) = yy_bp;
+ (yy_hold_char) = *yy_cp;
+ (yy_c_buf_p) = yy_cp;
}
+#endif
+
#ifndef YY_NO_INPUT
#ifdef __cplusplus
static int yyinput (void)
#endif
{
- int c;
-
- *(yy_c_buf_p) = (yy_hold_char);
-
- if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
- if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- /* This was really a NUL. */
- *(yy_c_buf_p) = '\0';
-
- else
- { /* need more input */
- int offset = (yy_c_buf_p) - (yytext_ptr);
- ++(yy_c_buf_p);
-
- switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
- * sees that we've accumulated a
- * token and flags that we need to
- * try matching the token before
- * proceeding. But for input(),
- * there's no matching to consider.
- * So convert the EOB_ACT_LAST_MATCH
- * to EOB_ACT_END_OF_FILE.
- */
-
- /* Reset buffer status. */
- xbt_automaton_parser_restart(xbt_automaton_parser_in );
-
- /*FALLTHROUGH*/
-
- case EOB_ACT_END_OF_FILE:
- {
- if ( xbt_automaton_parser_wrap( ) )
- return EOF;
-
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
+ int c;
+
+ *(yy_c_buf_p) = (yy_hold_char);
+
+ if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
+ {
+ /* yy_c_buf_p now points to the character we want to return.
+ * If this occurs *before* the EOB characters, then it's a
+ * valid NUL; if not, then we've hit the end of the buffer.
+ */
+ if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ /* This was really a NUL. */
+ *(yy_c_buf_p) = '\0';
+
+ else
+ { /* need more input */
+ yy_size_t offset = (yy_c_buf_p) - (yytext_ptr);
+ ++(yy_c_buf_p);
+
+ switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_LAST_MATCH:
+ /* This happens because yy_g_n_b()
+ * sees that we've accumulated a
+ * token and flags that we need to
+ * try matching the token before
+ * proceeding. But for input(),
+ * there's no matching to consider.
+ * So convert the EOB_ACT_LAST_MATCH
+ * to EOB_ACT_END_OF_FILE.
+ */
+
+ /* Reset buffer status. */
+ xbt_automaton_parser_restart(xbt_automaton_parser_in );
+
+ /*FALLTHROUGH*/
+
+ case EOB_ACT_END_OF_FILE:
+ {
+ if ( xbt_automaton_parser_wrap( ) )
+ return EOF;
+
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
#ifdef __cplusplus
- return yyinput();
+ return yyinput();
#else
- return input();
+ return input();
#endif
- }
+ }
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) = (yytext_ptr) + offset;
- break;
- }
- }
- }
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) = (yytext_ptr) + offset;
+ break;
+ }
+ }
+ }
- c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
- *(yy_c_buf_p) = '\0'; /* preserve xbt_automaton_parser_text */
- (yy_hold_char) = *++(yy_c_buf_p);
+ c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
+ *(yy_c_buf_p) = '\0'; /* preserve xbt_automaton_parser_text */
+ (yy_hold_char) = *++(yy_c_buf_p);
- return c;
+ return c;
}
-#endif /* ifndef YY_NO_INPUT */
+#endif /* ifndef YY_NO_INPUT */
/** Immediately switch to a different input stream.
* @param input_file A readable stream.
- *
+ *
* @note This function does not reset the start condition to @c INITIAL .
*/
void xbt_automaton_parser_restart (FILE * input_file )
{
-
- if ( ! YY_CURRENT_BUFFER ){
+
+ if ( ! YY_CURRENT_BUFFER ){
xbt_automaton_parser_ensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
+ YY_CURRENT_BUFFER_LVALUE =
xbt_automaton_parser__create_buffer(xbt_automaton_parser_in,YY_BUF_SIZE );
- }
+ }
- xbt_automaton_parser__init_buffer(YY_CURRENT_BUFFER,input_file );
- xbt_automaton_parser__load_buffer_state( );
+ xbt_automaton_parser__init_buffer(YY_CURRENT_BUFFER,input_file );
+ xbt_automaton_parser__load_buffer_state( );
}
/** Switch to a different input buffer.
* @param new_buffer The new input buffer.
- *
+ *
*/
void xbt_automaton_parser__switch_to_buffer (YY_BUFFER_STATE new_buffer )
{
-
- /* TODO. We should be able to replace this entire function body
- * with
- * xbt_automaton_parser_pop_buffer_state();
- * xbt_automaton_parser_push_buffer_state(new_buffer);
+
+ /* TODO. We should be able to replace this entire function body
+ * with
+ * xbt_automaton_parser_pop_buffer_state();
+ * xbt_automaton_parser_push_buffer_state(new_buffer);
*/
- xbt_automaton_parser_ensure_buffer_stack ();
- if ( YY_CURRENT_BUFFER == new_buffer )
- return;
-
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
- xbt_automaton_parser__load_buffer_state( );
-
- /* We don't actually know whether we did this switch during
- * EOF (xbt_automaton_parser_wrap()) processing, but the only time this flag
- * is looked at is after xbt_automaton_parser_wrap() is called, so it's safe
- * to go ahead and always set it.
- */
- (yy_did_buffer_switch_on_eof) = 1;
+ xbt_automaton_parser_ensure_buffer_stack ();
+ if ( YY_CURRENT_BUFFER == new_buffer )
+ return;
+
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+ xbt_automaton_parser__load_buffer_state( );
+
+ /* We don't actually know whether we did this switch during
+ * EOF (xbt_automaton_parser_wrap()) processing, but the only time this flag
+ * is looked at is after xbt_automaton_parser_wrap() is called, so it's safe
+ * to go ahead and always set it.
+ */
+ (yy_did_buffer_switch_on_eof) = 1;
}
static void xbt_automaton_parser__load_buffer_state (void)
{
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
- xbt_automaton_parser_in = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
- (yy_hold_char) = *(yy_c_buf_p);
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
+ xbt_automaton_parser_in = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
+ (yy_hold_char) = *(yy_c_buf_p);
}
/** Allocate and initialize an input buffer state.
* @param file A readable stream.
* @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
+ *
* @return the allocated buffer state.
*/
YY_BUFFER_STATE xbt_automaton_parser__create_buffer (FILE * file, int size )
{
- YY_BUFFER_STATE b;
-
- b = (YY_BUFFER_STATE) xbt_automaton_parser_alloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser__create_buffer()" );
+ YY_BUFFER_STATE b;
+
+ b = (YY_BUFFER_STATE) xbt_automaton_parser_alloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser__create_buffer()" );
- b->yy_buf_size = size;
+ b->yy_buf_size = (yy_size_t)size;
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
- b->yy_ch_buf = (char *) xbt_automaton_parser_alloc(b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser__create_buffer()" );
+ /* yy_ch_buf has to be 2 characters longer than the size given because
+ * we need to put in 2 end-of-buffer characters.
+ */
+ b->yy_ch_buf = (char *) xbt_automaton_parser_alloc(b->yy_buf_size + 2 );
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser__create_buffer()" );
- b->yy_is_our_buffer = 1;
+ b->yy_is_our_buffer = 1;
- xbt_automaton_parser__init_buffer(b,file );
+ xbt_automaton_parser__init_buffer(b,file );
- return b;
+ return b;
}
/** Destroy the buffer.
* @param b a buffer created with xbt_automaton_parser__create_buffer()
- *
+ *
*/
void xbt_automaton_parser__delete_buffer (YY_BUFFER_STATE b )
{
-
- if ( ! b )
- return;
- if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
- YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
+ if ( ! b )
+ return;
+
+ if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
+ YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
- if ( b->yy_is_our_buffer )
- xbt_automaton_parser_free((void *) b->yy_ch_buf );
+ if ( b->yy_is_our_buffer )
+ xbt_automaton_parser_free((void *) b->yy_ch_buf );
- xbt_automaton_parser_free((void *) b );
+ xbt_automaton_parser_free((void *) b );
}
-#ifndef __cplusplus
-extern int isatty (int );
-#endif /* __cplusplus */
-
/* Initializes or reinitializes a buffer.
* This function is sometimes called more than once on the same buffer,
* such as during a xbt_automaton_parser_restart() or at EOF.
static void xbt_automaton_parser__init_buffer (YY_BUFFER_STATE b, FILE * file )
{
- int oerrno = errno;
-
- xbt_automaton_parser__flush_buffer(b );
+ int oerrno = errno;
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
+ xbt_automaton_parser__flush_buffer(b );
+
+ b->yy_input_file = file;
+ b->yy_fill_buffer = 1;
/* If b is the current buffer, then xbt_automaton_parser__init_buffer was _probably_
* called from xbt_automaton_parser_restart() or through yy_get_next_buffer.
}
b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-
- errno = oerrno;
+
+ errno = oerrno;
}
/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
* @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
+ *
*/
void xbt_automaton_parser__flush_buffer (YY_BUFFER_STATE b )
{
- if ( ! b )
- return;
+ if ( ! b )
+ return;
- b->yy_n_chars = 0;
+ b->yy_n_chars = 0;
- /* We always need two end-of-buffer characters. The first causes
- * a transition to the end-of-buffer state. The second causes
- * a jam in that state.
- */
- b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
- b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
+ /* We always need two end-of-buffer characters. The first causes
+ * a transition to the end-of-buffer state. The second causes
+ * a jam in that state.
+ */
+ b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
+ b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
- b->yy_buf_pos = &b->yy_ch_buf[0];
+ b->yy_buf_pos = &b->yy_ch_buf[0];
- b->yy_at_bol = 1;
- b->yy_buffer_status = YY_BUFFER_NEW;
+ b->yy_at_bol = 1;
+ b->yy_buffer_status = YY_BUFFER_NEW;
- if ( b == YY_CURRENT_BUFFER )
- xbt_automaton_parser__load_buffer_state( );
+ if ( b == YY_CURRENT_BUFFER )
+ xbt_automaton_parser__load_buffer_state( );
}
/** Pushes the new state onto the stack. The new state becomes
* the current state. This function will allocate the stack
* if necessary.
* @param new_buffer The new state.
- *
+ *
*/
void xbt_automaton_parser_push_buffer_state (YY_BUFFER_STATE new_buffer )
{
- if (new_buffer == NULL)
- return;
-
- xbt_automaton_parser_ensure_buffer_stack();
-
- /* This block is copied from xbt_automaton_parser__switch_to_buffer. */
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- /* Only push if top exists. Otherwise, replace top. */
- if (YY_CURRENT_BUFFER)
- (yy_buffer_stack_top)++;
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
-
- /* copied from xbt_automaton_parser__switch_to_buffer. */
- xbt_automaton_parser__load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
+ if (new_buffer == NULL)
+ return;
+
+ xbt_automaton_parser_ensure_buffer_stack();
+
+ /* This block is copied from xbt_automaton_parser__switch_to_buffer. */
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ /* Only push if top exists. Otherwise, replace top. */
+ if (YY_CURRENT_BUFFER)
+ (yy_buffer_stack_top)++;
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+
+ /* copied from xbt_automaton_parser__switch_to_buffer. */
+ xbt_automaton_parser__load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
}
/** Removes and deletes the top of the stack, if present.
* The next element becomes the new top.
- *
+ *
*/
void xbt_automaton_parser_pop_buffer_state (void)
{
- if (!YY_CURRENT_BUFFER)
- return;
-
- xbt_automaton_parser__delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- if ((yy_buffer_stack_top) > 0)
- --(yy_buffer_stack_top);
-
- if (YY_CURRENT_BUFFER) {
- xbt_automaton_parser__load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
- }
+ if (!YY_CURRENT_BUFFER)
+ return;
+
+ xbt_automaton_parser__delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ if ((yy_buffer_stack_top) > 0)
+ --(yy_buffer_stack_top);
+
+ if (YY_CURRENT_BUFFER) {
+ xbt_automaton_parser__load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
+ }
}
/* Allocates the stack if it does not exist.
*/
static void xbt_automaton_parser_ensure_buffer_stack (void)
{
- int num_to_alloc;
-
- if (!(yy_buffer_stack)) {
+ yy_size_t num_to_alloc;
+
+ if (!(yy_buffer_stack)) {
- /* First allocation is just for 2 elements, since we don't know if this
- * scanner will even need a stack. We use 2 instead of 1 to avoid an
- * immediate realloc on the next call.
+ /* First allocation is just for 2 elements, since we don't know if this
+ * scanner will even need a stack. We use 2 instead of 1 to avoid an
+ * immediate realloc on the next call.
*/
- num_to_alloc = 1;
- (yy_buffer_stack) = (struct yy_buffer_state**)xbt_automaton_parser_alloc
- (num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser_ensure_buffer_stack()" );
-
- memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
- (yy_buffer_stack_max) = num_to_alloc;
- (yy_buffer_stack_top) = 0;
- return;
- }
-
- if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
-
- /* Increase the buffer to prepare for a possible push. */
- int grow_size = 8 /* arbitrary grow size */;
-
- num_to_alloc = (yy_buffer_stack_max) + grow_size;
- (yy_buffer_stack) = (struct yy_buffer_state**)xbt_automaton_parser_realloc
- ((yy_buffer_stack),
- num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser_ensure_buffer_stack()" );
-
- /* zero only the new slots.*/
- memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
- (yy_buffer_stack_max) = num_to_alloc;
- }
+ num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */
+ (yy_buffer_stack) = (struct yy_buffer_state**)xbt_automaton_parser_alloc
+ (num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser_ensure_buffer_stack()" );
+
+ memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
+
+ (yy_buffer_stack_max) = num_to_alloc;
+ (yy_buffer_stack_top) = 0;
+ return;
+ }
+
+ if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
+
+ /* Increase the buffer to prepare for a possible push. */
+ yy_size_t grow_size = 8 /* arbitrary grow size */;
+
+ num_to_alloc = (yy_buffer_stack_max) + grow_size;
+ (yy_buffer_stack) = (struct yy_buffer_state**)xbt_automaton_parser_realloc
+ ((yy_buffer_stack),
+ num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser_ensure_buffer_stack()" );
+
+ /* zero only the new slots.*/
+ memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
+ (yy_buffer_stack_max) = num_to_alloc;
+ }
}
/** Setup the input buffer state to scan directly from a user-specified character buffer.
* @param base the character buffer
* @param size the size in bytes of the character buffer
- *
- * @return the newly allocated buffer state object.
+ *
+ * @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE xbt_automaton_parser__scan_buffer (char * base, yy_size_t size )
{
- YY_BUFFER_STATE b;
-
- if ( size < 2 ||
- base[size-2] != YY_END_OF_BUFFER_CHAR ||
- base[size-1] != YY_END_OF_BUFFER_CHAR )
- /* They forgot to leave room for the EOB's. */
- return 0;
-
- b = (YY_BUFFER_STATE) xbt_automaton_parser_alloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser__scan_buffer()" );
-
- b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
- b->yy_buf_pos = b->yy_ch_buf = base;
- b->yy_is_our_buffer = 0;
- b->yy_input_file = 0;
- b->yy_n_chars = b->yy_buf_size;
- b->yy_is_interactive = 0;
- b->yy_at_bol = 1;
- b->yy_fill_buffer = 0;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- xbt_automaton_parser__switch_to_buffer(b );
-
- return b;
+ YY_BUFFER_STATE b;
+
+ if ( size < 2 ||
+ base[size-2] != YY_END_OF_BUFFER_CHAR ||
+ base[size-1] != YY_END_OF_BUFFER_CHAR )
+ /* They forgot to leave room for the EOB's. */
+ return 0;
+
+ b = (YY_BUFFER_STATE) xbt_automaton_parser_alloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser__scan_buffer()" );
+
+ b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
+ b->yy_buf_pos = b->yy_ch_buf = base;
+ b->yy_is_our_buffer = 0;
+ b->yy_input_file = 0;
+ b->yy_n_chars = b->yy_buf_size;
+ b->yy_is_interactive = 0;
+ b->yy_at_bol = 1;
+ b->yy_fill_buffer = 0;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+ xbt_automaton_parser__switch_to_buffer(b );
+
+ return b;
}
/** Setup the input buffer state to scan a string. The next call to xbt_automaton_parser_lex() will
* scan from a @e copy of @a str.
* @param yystr a NUL-terminated string to scan
- *
+ *
* @return the newly allocated buffer state object.
* @note If you want to scan bytes that may contain NUL values, then use
* xbt_automaton_parser__scan_bytes() instead.
*/
YY_BUFFER_STATE xbt_automaton_parser__scan_string (yyconst char * yystr )
{
-
- return xbt_automaton_parser__scan_bytes(yystr,strlen(yystr) );
+
+ return xbt_automaton_parser__scan_bytes(yystr,strlen(yystr) );
}
/** Setup the input buffer state to scan the given bytes. The next call to xbt_automaton_parser_lex() will
* scan from a @e copy of @a bytes.
* @param yybytes the byte buffer to scan
* @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
- *
+ *
* @return the newly allocated buffer state object.
*/
-YY_BUFFER_STATE xbt_automaton_parser__scan_bytes (yyconst char * yybytes, int _yybytes_len )
+YY_BUFFER_STATE xbt_automaton_parser__scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len )
{
- YY_BUFFER_STATE b;
- char *buf;
- yy_size_t n;
- int i;
-
- /* Get memory for full buffer, including space for trailing EOB's. */
- n = _yybytes_len + 2;
- buf = (char *) xbt_automaton_parser_alloc(n );
- if ( ! buf )
- YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser__scan_bytes()" );
-
- for ( i = 0; i < _yybytes_len; ++i )
- buf[i] = yybytes[i];
-
- buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
-
- b = xbt_automaton_parser__scan_buffer(buf,n );
- if ( ! b )
- YY_FATAL_ERROR( "bad buffer in xbt_automaton_parser__scan_bytes()" );
-
- /* It's okay to grow etc. this buffer, and we should throw it
- * away when we're done.
- */
- b->yy_is_our_buffer = 1;
-
- return b;
+ YY_BUFFER_STATE b;
+ char *buf;
+ yy_size_t n;
+ yy_size_t i;
+
+ /* Get memory for full buffer, including space for trailing EOB's. */
+ n = _yybytes_len + 2;
+ buf = (char *) xbt_automaton_parser_alloc(n );
+ if ( ! buf )
+ YY_FATAL_ERROR( "out of dynamic memory in xbt_automaton_parser__scan_bytes()" );
+
+ for ( i = 0; i < _yybytes_len; ++i )
+ buf[i] = yybytes[i];
+
+ buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
+
+ b = xbt_automaton_parser__scan_buffer(buf,n );
+ if ( ! b )
+ YY_FATAL_ERROR( "bad buffer in xbt_automaton_parser__scan_bytes()" );
+
+ /* It's okay to grow etc. this buffer, and we should throw it
+ * away when we're done.
+ */
+ b->yy_is_our_buffer = 1;
+
+ return b;
}
#ifndef YY_EXIT_FAILURE
static void yy_fatal_error (yyconst char* msg )
{
- (void) fprintf( stderr, "%s\n", msg );
- exit( YY_EXIT_FAILURE );
+ (void) fprintf( stderr, "%s\n", msg );
+ exit( YY_EXIT_FAILURE );
}
/* Redefine yyless() so it works in section 3 code. */
#undef yyless
#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up xbt_automaton_parser_text. */ \
+ do \
+ { \
+ /* Undo effects of setting up xbt_automaton_parser_text. */ \
int yyless_macro_arg = (n); \
YY_LESS_LINENO(yyless_macro_arg);\
- xbt_automaton_parser_text[xbt_automaton_parser_leng] = (yy_hold_char); \
- (yy_c_buf_p) = xbt_automaton_parser_text + yyless_macro_arg; \
- (yy_hold_char) = *(yy_c_buf_p); \
- *(yy_c_buf_p) = '\0'; \
- xbt_automaton_parser_leng = yyless_macro_arg; \
- } \
- while ( 0 )
+ xbt_automaton_parser_text[xbt_automaton_parser_leng] = (yy_hold_char); \
+ (yy_c_buf_p) = xbt_automaton_parser_text + yyless_macro_arg; \
+ (yy_hold_char) = *(yy_c_buf_p); \
+ *(yy_c_buf_p) = '\0'; \
+ xbt_automaton_parser_leng = yyless_macro_arg; \
+ } \
+ while ( 0 )
/* Accessor methods (get/set functions) to struct members. */
/** Get the current line number.
- *
+ *
*/
int xbt_automaton_parser_get_lineno (void)
{
-
+
return xbt_automaton_parser_lineno;
}
/** Get the input stream.
- *
+ *
*/
FILE *xbt_automaton_parser_get_in (void)
{
}
/** Get the output stream.
- *
+ *
*/
FILE *xbt_automaton_parser_get_out (void)
{
}
/** Get the length of the current token.
- *
+ *
*/
-int xbt_automaton_parser_get_leng (void)
+yy_size_t xbt_automaton_parser_get_leng (void)
{
return xbt_automaton_parser_leng;
}
/** Get the current token.
- *
+ *
*/
char *xbt_automaton_parser_get_text (void)
}
/** Set the current line number.
- * @param line_number
- *
+ * @param _line_number line number
+ *
*/
-void xbt_automaton_parser_set_lineno (int line_number )
+void xbt_automaton_parser_set_lineno (int _line_number )
{
-
- xbt_automaton_parser_lineno = line_number;
+
+ xbt_automaton_parser_lineno = _line_number;
}
/** Set the input stream. This does not discard the current
* input buffer.
- * @param in_str A readable stream.
- *
+ * @param _in_str A readable stream.
+ *
* @see xbt_automaton_parser__switch_to_buffer
*/
-void xbt_automaton_parser_set_in (FILE * in_str )
+void xbt_automaton_parser_set_in (FILE * _in_str )
{
- xbt_automaton_parser_in = in_str ;
+ xbt_automaton_parser_in = _in_str ;
}
-void xbt_automaton_parser_set_out (FILE * out_str )
+void xbt_automaton_parser_set_out (FILE * _out_str )
{
- xbt_automaton_parser_out = out_str ;
+ xbt_automaton_parser_out = _out_str ;
}
int xbt_automaton_parser_get_debug (void)
return xbt_automaton_parser__flex_debug;
}
-void xbt_automaton_parser_set_debug (int bdebug )
+void xbt_automaton_parser_set_debug (int _bdebug )
{
- xbt_automaton_parser__flex_debug = bdebug ;
+ xbt_automaton_parser__flex_debug = _bdebug ;
}
static int yy_init_globals (void)
/* xbt_automaton_parser_lex_destroy is for both reentrant and non-reentrant scanners. */
int xbt_automaton_parser_lex_destroy (void)
{
-
+
/* Pop the buffer stack, destroying each element. */
- while(YY_CURRENT_BUFFER){
- xbt_automaton_parser__delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- xbt_automaton_parser_pop_buffer_state();
- }
+ while(YY_CURRENT_BUFFER){
+ xbt_automaton_parser__delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ xbt_automaton_parser_pop_buffer_state();
+ }
- /* Destroy the stack itself. */
- xbt_automaton_parser_free((yy_buffer_stack) );
- (yy_buffer_stack) = NULL;
+ /* Destroy the stack itself. */
+ xbt_automaton_parser_free((yy_buffer_stack) );
+ (yy_buffer_stack) = NULL;
/* Reset the globals. This is important in a non-reentrant scanner so the next time
* xbt_automaton_parser_lex() is called, initialization will occur. */
#ifndef yytext_ptr
static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
{
- register int i;
- for ( i = 0; i < n; ++i )
- s1[i] = s2[i];
+
+ int i;
+ for ( i = 0; i < n; ++i )
+ s1[i] = s2[i];
}
#endif
#ifdef YY_NEED_STRLEN
static int yy_flex_strlen (yyconst char * s )
{
- register int n;
- for ( n = 0; s[n]; ++n )
- ;
+ int n;
+ for ( n = 0; s[n]; ++n )
+ ;
- return n;
+ return n;
}
#endif
void *xbt_automaton_parser_alloc (yy_size_t size )
{
- return (void *) malloc( size );
+ return (void *) malloc( size );
}
void *xbt_automaton_parser_realloc (void * ptr, yy_size_t size )
{
- /* The cast to (char *) in the following accommodates both
- * implementations that use char* generic pointers, and those
- * that use void* generic pointers. It works with the latter
- * because both ANSI C and C++ allow castless assignment from
- * any pointer type to void*, and deal with argument conversions
- * as though doing an assignment.
- */
- return (void *) realloc( (char *) ptr, size );
+
+ /* The cast to (char *) in the following accommodates both
+ * implementations that use char* generic pointers, and those
+ * that use void* generic pointers. It works with the latter
+ * because both ANSI C and C++ allow castless assignment from
+ * any pointer type to void*, and deal with argument conversions
+ * as though doing an assignment.
+ */
+ return (void *) realloc( (char *) ptr, size );
}
void xbt_automaton_parser_free (void * ptr )
{
- free( (char *) ptr ); /* see xbt_automaton_parser_realloc() for (char *) cast */
+ free( (char *) ptr ); /* see xbt_automaton_parser_realloc() for (char *) cast */
}
#define YYTABLES_NAME "yytables"
-#line 76 "parserPromela.lex"
+#line 81 "parserPromela.lex"