#include "xbt/dynar.h"
#include <sys/types.h>
-/* IMPLEMENTATION NOTE ON SYNCHRONIZATION: every functions which name is prefixed by _
- * assumes that the dynar is already locked if we have to.
- * Other functions (public ones) check for this.
- */
-
XBT_LOG_NEW_DEFAULT_SUBCATEGORY(xbt_dyn, xbt, "Dynamic arrays");
-static XBT_INLINE void _dynar_lock(xbt_dynar_t dynar)
-{
- if (dynar->mutex)
- xbt_mutex_acquire(dynar->mutex);
-}
-
-static XBT_INLINE void _dynar_unlock(xbt_dynar_t dynar)
-{
- if (dynar->mutex)
- xbt_mutex_release(dynar->mutex);
-}
-
static XBT_INLINE void _sanity_check_dynar(xbt_dynar_t dynar)
{
xbt_assert(dynar, "dynar is NULL");
static XBT_INLINE void _check_inbound_idx(xbt_dynar_t dynar, int idx)
{
if (idx < 0 || idx >= dynar->used) {
- _dynar_unlock(dynar);
THROWF(bound_error, idx,
"dynar is not that long. You asked %d, but it's only %lu long",
(int) (idx), (unsigned long) dynar->used);
}
}
-static XBT_INLINE void _check_sloppy_inbound_idx(xbt_dynar_t dynar,
- int idx)
-{
- if (idx > dynar->used) {
- _dynar_unlock(dynar);
- THROWF(bound_error, idx,
- "dynar is not that long. You asked %d, but it's only %lu long (could have been equal to it)",
- (int) (idx), (unsigned long) dynar->used);
- }
-}
-
static XBT_INLINE void _check_populated_dynar(xbt_dynar_t dynar)
{
if (dynar->used == 0) {
- _dynar_unlock(dynar);
THROWF(bound_error, 0, "dynar %p is empty", dynar);
}
}
-static void _dynar_map(const xbt_dynar_t dynar, void_f_pvoid_t const op);
-
static XBT_INLINE
void _xbt_dynar_resize(xbt_dynar_t dynar, unsigned long new_size)
{
memcpy(elm, src, elmsize);
}
-static XBT_INLINE
- void
-_xbt_dynar_remove_at(xbt_dynar_t const dynar,
- const unsigned long idx, void *const object)
-{
-
- unsigned long nb_shift;
- unsigned long offset;
-
- _sanity_check_dynar(dynar);
- _check_inbound_idx(dynar, idx);
-
- if (object) {
- _xbt_dynar_get_elm(object, dynar, idx);
- } else if (dynar->free_f) {
- dynar->free_f(_xbt_dynar_elm(dynar, idx));
- }
-
- nb_shift = dynar->used - 1 - idx;
-
- if (nb_shift) {
- offset = nb_shift * dynar->elmsize;
- memmove(_xbt_dynar_elm(dynar, idx), _xbt_dynar_elm(dynar, idx + 1),
- offset);
- }
-
- dynar->used--;
-}
-
void xbt_dynar_dump(xbt_dynar_t dynar)
{
XBT_INFO("Dynar dump: size=%lu; used=%lu; elmsize=%lu; data=%p; free_f=%p",
dynar->elmsize = elmsize;
dynar->data = NULL;
dynar->free_f = free_f;
- dynar->mutex = NULL;
return dynar;
}
-/** @brief Creates a synchronized dynar.
- *
- * Just like #xbt_dynar_new, but each access to the structure will be protected by a mutex
- *
- */
-xbt_dynar_t
-xbt_dynar_new_sync(const unsigned long elmsize,
- void_f_pvoid_t const free_f)
-{
- xbt_dynar_t res = xbt_dynar_new(elmsize, free_f);
- res->mutex = xbt_mutex_init();
- return res;
-}
-
/** @brief Destructor of the structure not touching to the content
*
* \param dynar poor victim
if (dynar && *dynar) {
xbt_dynar_t d = *dynar;
free(d->data);
- if (d->mutex)
- xbt_mutex_destroy(d->mutex);
free(d);
*dynar = NULL;
}
*/
XBT_INLINE void xbt_dynar_reset(xbt_dynar_t const dynar)
{
- _dynar_lock(dynar);
-
_sanity_check_dynar(dynar);
XBT_DEBUG("Reset the dynar %p", (void *) dynar);
if (dynar->free_f) {
- _dynar_map(dynar, dynar->free_f);
+ xbt_dynar_map(dynar, dynar->free_f);
}
dynar->used = 0;
+}
+
+/** @brief Merge dynar d2 into d1
+ *
+ * \param d1 dynar to keep
+ * \param d2 dynar to merge into d1. This dynar is free at end.
+ */
+void xbt_dynar_merge(xbt_dynar_t *d1, xbt_dynar_t *d2)
+{
+ if((*d1)->elmsize != (*d2)->elmsize)
+ xbt_die("Element size must are not equal");
+
+ const unsigned long elmsize = (*d1)->elmsize;
- _dynar_unlock(dynar);
+ void *ptr = _xbt_dynar_elm((*d2), 0);
+ _xbt_dynar_resize(*d1, (*d1)->size + (*d2)->size);
+ void *elm = _xbt_dynar_elm((*d1), (*d1)->used);
+
+ memcpy(elm, ptr, ((*d2)->size)*elmsize);
+ (*d1)->used += (*d2)->used;
+ (*d2)->used = 0;
+ xbt_dynar_free(d2);
}
/**
*/
void xbt_dynar_shrink(xbt_dynar_t dynar, int empty_slots_wanted)
{
- _dynar_lock(dynar);
_xbt_dynar_resize(dynar, dynar->used + empty_slots_wanted);
- _dynar_unlock(dynar);
}
/** @brief Destructor
xbt_dynar_get_cpy(const xbt_dynar_t dynar,
const unsigned long idx, void *const dst)
{
- _dynar_lock(dynar);
_sanity_check_dynar(dynar);
_check_inbound_idx(dynar, idx);
_xbt_dynar_get_elm(dst, dynar, idx);
- _dynar_unlock(dynar);
}
/** @brief Retrieve a pointer to the Nth element of a dynar.
{
void *res;
- _dynar_lock(dynar);
_sanity_check_dynar(dynar);
_check_inbound_idx(dynar, idx);
res = _xbt_dynar_elm(dynar, idx);
- _dynar_unlock(dynar);
return res;
}
-/* not synchronized */
-static XBT_INLINE void *_xbt_dynar_set_at_ptr(const xbt_dynar_t dynar,
- const unsigned long idx)
+XBT_INLINE void *xbt_dynar_set_at_ptr(const xbt_dynar_t dynar,
+ const unsigned long idx)
{
_sanity_check_dynar(dynar);
return _xbt_dynar_elm(dynar, idx);
}
-XBT_INLINE void *xbt_dynar_set_at_ptr(const xbt_dynar_t dynar,
- const unsigned long idx)
-{
- void *res;
- _dynar_lock(dynar);
- res = _xbt_dynar_set_at_ptr(dynar, idx);
- _dynar_unlock(dynar);
- return res;
-}
-
-static void XBT_INLINE /* not synchronized */
-_xbt_dynar_set(xbt_dynar_t dynar,
- const unsigned long idx, const void *const src)
-{
- memcpy(_xbt_dynar_set_at_ptr(dynar, idx), src, dynar->elmsize);
-}
-
/** @brief Set the Nth element of a dynar (expanded if needed). Previous value at this position is NOT freed
*
* \param dynar information dealer
const void *const src)
{
- _dynar_lock(dynar);
- _xbt_dynar_set(dynar, idx, src);
- _dynar_unlock(dynar);
+ memcpy(xbt_dynar_set_at_ptr(dynar, idx), src, dynar->elmsize);
}
/** @brief Set the Nth element of a dynar (expanded if needed). Previous value is freed
xbt_dynar_replace(xbt_dynar_t dynar,
const unsigned long idx, const void *const object)
{
- _dynar_lock(dynar);
_sanity_check_dynar(dynar);
if (idx < dynar->used && dynar->free_f) {
dynar->free_f(old_object);
}
- _xbt_dynar_set(dynar, idx, object);
- _dynar_unlock(dynar);
+ xbt_dynar_set(dynar, idx, object);
}
-static XBT_INLINE void *_xbt_dynar_insert_at_ptr(xbt_dynar_t const dynar,
- const unsigned long idx)
+/** @brief Make room for a new element, and return a pointer to it
+ *
+ * You can then use regular affectation to set its value instead of relying
+ * on the slow memcpy. This is what xbt_dynar_insert_at_as() does.
+ */
+void *xbt_dynar_insert_at_ptr(xbt_dynar_t const dynar, const int idx)
{
void *res;
unsigned long old_used;
return res;
}
-/** @brief Make room for a new element, and return a pointer to it
- *
- * You can then use regular affectation to set its value instead of relying
- * on the slow memcpy. This is what xbt_dynar_insert_at_as() does.
- */
-void *xbt_dynar_insert_at_ptr(xbt_dynar_t const dynar, const int idx)
-{
- void *res;
-
- _dynar_lock(dynar);
- res = _xbt_dynar_insert_at_ptr(dynar, idx);
- _dynar_unlock(dynar);
- return res;
-}
-
/** @brief Set the Nth dynar's element, expanding the dynar and sliding the previous values to the right
*
* Set the Nth element of a dynar, expanding the dynar if needed, and
const int idx, const void *const src)
{
- _dynar_lock(dynar);
/* checks done in xbt_dynar_insert_at_ptr */
- memcpy(_xbt_dynar_insert_at_ptr(dynar, idx), src, dynar->elmsize);
- _dynar_unlock(dynar);
+ memcpy(xbt_dynar_insert_at_ptr(dynar, idx), src, dynar->elmsize);
}
/** @brief Remove the Nth dynar's element, sliding the previous values to the left
xbt_dynar_remove_at(xbt_dynar_t const dynar,
const int idx, void *const object)
{
+ unsigned long nb_shift;
+ unsigned long offset;
+
+ _sanity_check_dynar(dynar);
+ _check_inbound_idx(dynar, idx);
+
+ if (object) {
+ _xbt_dynar_get_elm(object, dynar, idx);
+ } else if (dynar->free_f) {
+ dynar->free_f(_xbt_dynar_elm(dynar, idx));
+ }
+
+ nb_shift = dynar->used - 1 - idx;
+
+ if (nb_shift) {
+ offset = nb_shift * dynar->elmsize;
+ memmove(_xbt_dynar_elm(dynar, idx), _xbt_dynar_elm(dynar, idx + 1),
+ offset);
+ }
+
+ dynar->used--;
+}
+
+/** @brief Remove a slice of the dynar, sliding the rest of the values to the left
+ *
+ * This function removes an n-sized slice that starts at element idx. It is equivalent
+ * to xbt_dynar_remove_at with a NULL object argument if n equals to 1.
+ *
+ * Each of the removed elements is freed using the free_f function passed at dynar
+ * creation.
+ */
+void
+xbt_dynar_remove_n_at(xbt_dynar_t const dynar,
+ const unsigned int n, const int idx)
+{
+ unsigned long nb_shift;
+ unsigned long offset;
+ unsigned long cur;
+
+ if (!n) return;
+
+ _sanity_check_dynar(dynar);
+ _check_inbound_idx(dynar, idx);
+ _check_inbound_idx(dynar, idx + n - 1);
- _dynar_lock(dynar);
- _xbt_dynar_remove_at(dynar, idx, object);
- _dynar_unlock(dynar);
+ if (dynar->free_f) {
+ for (cur = idx; cur < idx + n; cur++) {
+ dynar->free_f(_xbt_dynar_elm(dynar, cur));
+ }
+ }
+
+ nb_shift = dynar->used - n - idx;
+
+ if (nb_shift) {
+ offset = nb_shift * dynar->elmsize;
+ memmove(_xbt_dynar_elm(dynar, idx), _xbt_dynar_elm(dynar, idx + n),
+ offset);
+ }
+
+ dynar->used -= n;
}
/** @brief Returns the position of the element in the dynar
*
- * Raises not_found_error if not found.
+ * Beware that if your dynar contains pointed values (such as strings) instead
+ * of scalar, this function compares the pointer value, not what's pointed. The only
+ * solution to search for a pointed value is then to write the foreach loop yourself:
+ * \code
+ * signed int position = -1;
+ * xbt_dynar_foreach(dynar, iter, elem) {
+ * if (!memcmp(elem, searched_element, sizeof(*elem))) {
+ * position = iter;
+ * break;
+ * }
+ * }
+ * \endcode
+ *
+ * Raises not_found_error if not found. If you have less than 2 millions elements,
+ * you probably want to use #xbt_dynar_search_or_negative() instead, so that you
+ * don't have to TRY/CATCH on element not found.
*/
unsigned int xbt_dynar_search(xbt_dynar_t const dynar, void *const elem)
{
unsigned long it;
- _dynar_lock(dynar);
for (it = 0; it < dynar->used; it++)
if (!memcmp(_xbt_dynar_elm(dynar, it), elem, dynar->elmsize)) {
- _dynar_unlock(dynar);
return it;
}
- _dynar_unlock(dynar);
THROWF(not_found_error, 0, "Element %p not part of dynar %p", elem,
dynar);
}
-/** @brief Returns a boolean indicating whether the element is part of the dynar */
+/** @brief Returns the position of the element in the dynar (or -1 if not found)
+ *
+ * Beware that if your dynar contains pointed values (such as
+ * strings) instead of scalar, this function is probably not what you
+ * want. Check the documentation of xbt_dynar_search() for more info.
+ *
+ * Note that usually, the dynar indices are unsigned integers. If you have more
+ * than 2 million elements in your dynar, this very function will not work (but the other will).
+ */
+signed int xbt_dynar_search_or_negative(xbt_dynar_t const dynar, void *const elem)
+{
+ unsigned long it;
+
+ for (it = 0; it < dynar->used; it++)
+ if (!memcmp(_xbt_dynar_elm(dynar, it), elem, dynar->elmsize)) {
+ return it;
+ }
+
+ return -1;
+}
+
+/** @brief Returns a boolean indicating whether the element is part of the dynar
+ *
+ * Beware that if your dynar contains pointed values (such as
+ * strings) instead of scalar, this function is probably not what you
+ * want. Check the documentation of xbt_dynar_search() for more info.
+ */
int xbt_dynar_member(xbt_dynar_t const dynar, void *const elem)
{
*/
XBT_INLINE void *xbt_dynar_push_ptr(xbt_dynar_t const dynar)
{
- void *res;
-
- /* we have to inline xbt_dynar_insert_at_ptr here to make sure that
- dynar->used don't change between reading it and getting the lock
- within xbt_dynar_insert_at_ptr */
- _dynar_lock(dynar);
- res = _xbt_dynar_insert_at_ptr(dynar, dynar->used);
- _dynar_unlock(dynar);
- return res;
+ return xbt_dynar_insert_at_ptr(dynar, dynar->used);
}
/** @brief Add an element at the end of the dynar */
XBT_INLINE void xbt_dynar_push(xbt_dynar_t const dynar,
const void *const src)
{
- _dynar_lock(dynar);
/* checks done in xbt_dynar_insert_at_ptr */
- memcpy(_xbt_dynar_insert_at_ptr(dynar, dynar->used), src,
- dynar->elmsize);
- _dynar_unlock(dynar);
+ memcpy(xbt_dynar_insert_at_ptr(dynar, dynar->used), src, dynar->elmsize);
}
/** @brief Mark the last dynar's element as unused and return a pointer to it.
*/
XBT_INLINE void *xbt_dynar_pop_ptr(xbt_dynar_t const dynar)
{
- void *res;
-
- _dynar_lock(dynar);
_check_populated_dynar(dynar);
XBT_DEBUG("Pop %p", (void *) dynar);
dynar->used--;
- res = _xbt_dynar_elm(dynar, dynar->used);
- _dynar_unlock(dynar);
- return res;
+ return _xbt_dynar_elm(dynar, dynar->used);
}
/** @brief Get and remove the last element of the dynar */
/* sanity checks done by remove_at */
XBT_DEBUG("Pop %p", (void *) dynar);
- _dynar_lock(dynar);
- _xbt_dynar_remove_at(dynar, dynar->used - 1, dst);
- _dynar_unlock(dynar);
+ xbt_dynar_remove_at(dynar, dynar->used - 1, dst);
}
/** @brief Add an element at the begining of the dynar.
xbt_dynar_remove_at(dynar, 0, dst);
}
-static void _dynar_map(const xbt_dynar_t dynar, void_f_pvoid_t const op)
-{
- char *const data = (char *) dynar->data;
- const unsigned long elmsize = dynar->elmsize;
- const unsigned long used = dynar->used;
- unsigned long i;
-
- for (i = 0; i < used; i++) {
- char* elm = (char*) data + i * elmsize;
- op(elm);
- }
-}
-
/** @brief Apply a function to each member of a dynar
*
* The mapped function may change the value of the element itself,
* but should not mess with the structure of the dynar.
- *
- * If the dynar is synchronized, it is locked during the whole map
- * operation, so make sure your function don't call any function
- * from xbt_dynar_* on it, or you'll get a deadlock.
*/
XBT_INLINE void xbt_dynar_map(const xbt_dynar_t dynar,
void_f_pvoid_t const op)
{
+ char *const data = (char *) dynar->data;
+ const unsigned long elmsize = dynar->elmsize;
+ const unsigned long used = dynar->used;
+ unsigned long i;
_sanity_check_dynar(dynar);
- _dynar_lock(dynar);
-
- _dynar_map(dynar, op);
- _dynar_unlock(dynar);
+ for (i = 0; i < used; i++) {
+ char* elm = (char*) data + i * elmsize;
+ op(elm);
+ }
}
unsigned int *const cursor)
{
- _xbt_dynar_remove_at(dynar, (*cursor)--, NULL);
-}
-
-/** @brief Unlocks a synchronized dynar when you want to break the traversal
- *
- * This function must be used if you <tt>break</tt> the
- * xbt_dynar_foreach loop, but shouldn't be called at the end of a
- * regular traversal reaching the end of the elements
- */
-XBT_INLINE void xbt_dynar_cursor_unlock(xbt_dynar_t dynar)
-{
- _dynar_unlock(dynar);
+ xbt_dynar_remove_at(dynar, (*cursor)--, NULL);
}
/** @brief Sorts a dynar according to the function <tt>compar_fn</tt>
XBT_INLINE void xbt_dynar_sort(xbt_dynar_t dynar,
int_f_cpvoid_cpvoid_t compar_fn)
{
-
- _dynar_lock(dynar);
-
#ifdef HAVE_MERGESORT
mergesort(dynar->data, dynar->used, dynar->elmsize, compar_fn);
#else
qsort(dynar->data, dynar->used, dynar->elmsize, compar_fn);
#endif
- _dynar_unlock(dynar);
}
-/** @brief Transform a dynar into a NULL terminated array
+/** @brief Sorts a dynar according to their color assuming elements can have only three colors.
+ * Since there are only three colors, it is linear and much faster than a classical sort.
+ * See for example http://en.wikipedia.org/wiki/Dutch_national_flag_problem
+ *
+ * \param dynar the dynar to sort
+ * \param color the color function of type (int (compar_fn*) (void*) (void*)). The return value of color is assumed to be 0, 1, or 2.
*
+ * At the end of the call, elements with color 0 are at the beginning of the dynar, elements with color 2 are at the end and elements with color 1 are in the middle.
+ *
+ * Remark: if the elements stored in the dynar are structures, the color
+ * function has to retrieve the field to sort first.
+ */
+XBT_PUBLIC(void) xbt_dynar_three_way_partition(xbt_dynar_t const dynar,
+ int_f_pvoid_t color)
+{
+ unsigned long int i;
+ unsigned long int p = -1;
+ unsigned long int q = dynar->used;
+ const unsigned long elmsize = dynar->elmsize;
+ void *tmp = xbt_malloc(elmsize);
+ void *elm;
+
+ for (i = 0; i < q;) {
+ void *elmi = _xbt_dynar_elm(dynar, i);
+ int colori = color(elmi);
+
+ if (colori == 1) {
+ ++i;
+ } else {
+ if (colori == 0) {
+ elm = _xbt_dynar_elm(dynar, ++p);
+ ++i;
+ } else { /* colori == 2 */
+ elm = _xbt_dynar_elm(dynar, --q);
+ }
+ if (elm != elmi) {
+ memcpy(tmp, elm, elmsize);
+ memcpy(elm, elmi, elmsize);
+ memcpy(elmi, tmp, elmsize);
+ }
+ }
+ }
+ xbt_free(tmp);
+}
+
+/** @brief Transform a dynar into a NULL terminated array.
+ * The dynar won't be usable afterwards.
* \param dynar the dynar to transform
*/
XBT_INLINE void * xbt_dynar_to_array (xbt_dynar_t dynar)
xbt_dynar_shrink(dynar, 1);
memset(xbt_dynar_push_ptr(dynar), 0, dynar->elmsize);
res = dynar->data;
- if (dynar->mutex)
- xbt_mutex_destroy(dynar->mutex);
free(dynar);
return res;
}
* Return 0 if d1 and d2 are equal and 1 if not equal
*/
XBT_INLINE int xbt_dynar_compare(xbt_dynar_t d1, xbt_dynar_t d2,
- int(*compar)(const void *, const void *))
+ int(*compar)(const void *, const void *))
{
- int i ;
- int size;
- if((!d1) && (!d2)) return 0;
- if((!d1) || (!d2))
- {
- XBT_DEBUG("NULL dynar d1=%p d2=%p",d1,d2);
- xbt_dynar_free(&d2);
- return 1;
- }
- if((d1->elmsize)!=(d2->elmsize))
- {
- XBT_DEBUG("Size of elmsize d1=%ld d2=%ld",d1->elmsize,d2->elmsize);
- xbt_dynar_free(&d2);
- return 1; // xbt_die
- }
- if(xbt_dynar_length(d1) != xbt_dynar_length(d2))
- {
- XBT_DEBUG("Size of dynar d1=%ld d2=%ld",xbt_dynar_length(d1),xbt_dynar_length(d2));
- xbt_dynar_free(&d2);
- return 1;
- }
-
- size = xbt_dynar_length(d1);
- for(i=0;i<size;i++)
- {
- void *data1 = xbt_dynar_get_as(d1, i, void *);
- void *data2 = xbt_dynar_get_as(d2, i, void *);
- XBT_DEBUG("link[%d] d1=%p d2=%p",i,data1,data2);
- if(compar(data1,data2)){
- xbt_dynar_free(&d2);
- return 1;
- }
- }
- xbt_dynar_free(&d2);
- return 0;
+ int i ;
+ int size;
+ if((!d1) && (!d2)) return 0;
+ if((!d1) || (!d2))
+ {
+ XBT_DEBUG("NULL dynar d1=%p d2=%p",d1,d2);
+ xbt_dynar_free(&d2);
+ return 1;
+ }
+ if((d1->elmsize)!=(d2->elmsize))
+ {
+ XBT_DEBUG("Size of elmsize d1=%lu d2=%lu",d1->elmsize,d2->elmsize);
+ xbt_dynar_free(&d2);
+ return 1; // xbt_die
+ }
+ if(xbt_dynar_length(d1) != xbt_dynar_length(d2))
+ {
+ XBT_DEBUG("Size of dynar d1=%lu d2=%lu",xbt_dynar_length(d1),xbt_dynar_length(d2));
+ xbt_dynar_free(&d2);
+ return 1;
+ }
+
+ size = xbt_dynar_length(d1);
+ for(i=0;i<size;i++)
+ {
+ void *data1 = xbt_dynar_get_as(d1, i, void *);
+ void *data2 = xbt_dynar_get_as(d2, i, void *);
+ XBT_DEBUG("link[%d] d1=%p d2=%p",i,data1,data2);
+ if(compar(data1,data2)){
+ xbt_dynar_free(&d2);
+ return 1;
+ }
+ }
+ xbt_dynar_free(&d2);
+ return 0;
}
#ifdef SIMGRID_TEST
#define NB_ELEM 5000
XBT_TEST_SUITE("dynar", "Dynar data container");
-XBT_LOG_EXTERNAL_CATEGORY(xbt_dyn);
-XBT_LOG_DEFAULT_CATEGORY(xbt_dyn);
+XBT_LOG_EXTERNAL_DEFAULT_CATEGORY(xbt_dyn);
XBT_TEST_UNIT("int", test_dynar_int, "Dynars of integers")
{
for (cursor = 0; cursor < NB_ELEM; cursor++) {
iptr = xbt_dynar_get_ptr(d, cursor);
xbt_test_assert(cursor == *iptr,
- "The retrieved value is not the same than the injected one (%d!=%d)",
+ "The retrieved value is not the same than the injected one (%u!=%d)",
cursor, cpt);
}
/* 3. Traverse the dynar using the neat macro to that extend */
xbt_dynar_foreach(d, cursor, cpt) {
xbt_test_assert(cursor == cpt,
- "The retrieved value is not the same than the injected one (%d!=%d)",
+ "The retrieved value is not the same than the injected one (%u!=%d)",
cursor, cpt);
}
/* end_of_traversal */
/* 3. Traverse the dynar */
xbt_dynar_foreach(d, cursor, cpt) {
xbt_test_assert(cursor == cpt,
- "The retrieved value is not the same than the injected one (%d!=%d)",
+ "The retrieved value is not the same than the injected one (%u!=%d)",
cursor, cpt);
}
/* end_of_traversal */
xbt_dynar_set_as(d, cpt, int, cpt);
xbt_dynar_foreach(d, cursor, cpt)
xbt_test_assert(cursor == cpt,
- "The retrieved value is not the same than the injected one (%d!=%d)",
+ "The retrieved value is not the same than the injected one (%u!=%d)",
cursor, cpt);
for (cpt = 0; cpt < NB_ELEM; cpt++) {
int val;
xbt_dynar_remove_at(d,0,&val);
xbt_test_assert(cpt == val,
- "The retrieved value is not the same than the injected one (%d!=%d)",
+ "The retrieved value is not the same than the injected one (%u!=%d)",
cursor, cpt);
}
xbt_test_assert(xbt_dynar_is_empty(d),
/* 3. Traverse the dynar */
xbt_dynar_foreach(d, cursor, cpt) {
xbt_test_assert(cursor == cpt,
- "The retrieved value is not the same than the injected one (%d!=%d)",
+ "The retrieved value is not the same than the injected one (%u!=%d)",
cursor, cpt);
}
/* end_of_traversal */
int val;
xbt_dynar_remove_at(d,xbt_dynar_length(d)-1,&val);
xbt_test_assert(cpt == val,
- "The retrieved value is not the same than the injected one (%d!=%d)",
+ "The retrieved value is not the same than the injected one (%u!=%d)",
cursor, cpt);
}
xbt_test_assert(xbt_dynar_is_empty(d),
}
/* 2. Traverse the dynar with the macro */
xbt_dynar_foreach(d, iter, s1) {
- sprintf(buf, "%d", NB_ELEM - iter - 1);
+ sprintf(buf, "%u", NB_ELEM - iter - 1);
xbt_test_assert(!strcmp(buf, s1),
"The retrieved value is not the same than the injected one (%s!=%s)",
buf, s1);
}
xbt_dynar_free(&d); /* end_of_doxygen */
}
-
-
-/*******************************************************************************/
-/*******************************************************************************/
-/*******************************************************************************/
-#include "xbt/synchro.h"
-static void pusher_f(void *a)
-{
- xbt_dynar_t d = (xbt_dynar_t) a;
- int i;
- for (i = 0; i < 500; i++) {
- xbt_dynar_push(d, &i);
- }
-}
-
-static void poper_f(void *a)
-{
- xbt_dynar_t d = (xbt_dynar_t) a;
- volatile int i;
- int data;
- xbt_ex_t e;
-
- for (i = 0; i < 500; i++) {
- TRY {
- xbt_dynar_pop(d, &data);
- }
- CATCH(e) {
- if (e.category == bound_error) {
- xbt_ex_free(e);
- i--;
- } else {
- RETHROW;
- }
- }
- }
-}
-
-
-XBT_TEST_UNIT("synchronized int", test_dynar_sync_int, "Synchronized dynars of integers")
-{
- /* Vars_decl [doxygen cruft] */
- xbt_dynar_t d;
- xbt_thread_t pusher, poper;
-
- xbt_test_add("==== Have a pusher and a popper on the dynar");
- d = xbt_dynar_new_sync(sizeof(int), NULL);
- pusher = xbt_thread_create("pusher", pusher_f, d, 0 /*not joinable */ );
- poper = xbt_thread_create("poper", poper_f, d, 0 /*not joinable */ );
- xbt_thread_join(pusher);
- xbt_thread_join(poper);
- xbt_dynar_free(&d);
-}
-
#endif /* SIMGRID_TEST */