instructions and still have some troubles, drop an e-mail to
<simgrid-user@lists.gforge.inria.fr>.
-\subsection faq_compiling Compiling SimGrid
+\subsection faq_compiling Compiling SimGrid from an archive
+First of all, you need to download the latest version of SimGrid from
+<a href="http://gforge.inria.fr/frs/?group_id=12">here</a>.
Suppose you have uncompressed SimGrid in some temporary location of
your home directory (say <tt>/home/joe/tmp/simgrid-3.0.1 </tt>). The
simplest way to use SimGrid is to install it in your home
\verbatim export LD_LIBRARY_PATH=$HOME/lib/:$LD_LIBRARY_PATH
\endverbatim
+
+\subsection faq_compiling_cvs Compiling SimGrid from the CVS
+
+The project development takes place in the cvs, where all changes are
+commited when they happen. Then every once in a while, we make sure that the
+code quality meets our standard and release an archive from the code in the
+CVS. We afterward go back to the development in the CVS. So, if you need a
+recently added feature and can afford some little problem with the stability
+of the lastest features, you may want to use the CVS version instead of a
+released one.
+
+For that, you first need to get the "simgrid" module from
+<a href="http://gforge.inria.fr/scm/?group_id=12">here</a>.
+
+You won't find any <tt>configure</tt> and a few other things
+(<tt>Makefile.in</tt>'s, documentation, ...) will be missing as well. The
+reason for that is that all these files have to be regenerated using the
+latest versions of <tt>autoconf</tt>, <tt>libtool</tt>, <tt>automake</tt>
+(>1.9) and <tt>doxygen</tt> (>1.4). To generate the <tt>configure</tt> and
+the <tt>Makefile.in</tt>'s, you just have to launch the <tt>bootstrap</tt>
+command that resides in the top of the source tree. Then just follow the
+instructions of Section \ref faq_compiling.
+
+We insist on the fact that you really need the latest versions of
+autoconf and automake. Doing this step on exotic architectures/systems
+(i.e. anything different from a recent linux distribution) may be
+... uncertain. If you want to use the CVS version on another
+architecture/system, you should do the previous steps on a perfectly
+standard box, then do a <tt>make dist</tt> that will build you a
+perfectly portable SimGrid archive.
+
+In summary, the following commands will checkout the CVS, regenerate the
+configure script and friends, configure SimGrid and build an archive you can
+use on another machine afterward.
+
+\verbatim cvs -d :pserver:anonymous@scm.gforge.inria.fr:/cvsroot/simgrid login
+cvs -d :pserver:anonymous@scm.gforge.inria.fr:/cvsroot/simgrid checkout simgrid
+cd simgrid
+./bootstrap
+./configure --enable-maintainer-mode
+make dist \endverbatim
+
\subsection faq_setting Setting up your own code
Do not build your simulator by modifying the SimGrid examples. Go
\section faq_simgrid I'm new to SimGrid. I have some questions. Where should I start?
You are at the right place... Having a look to these
-<a href="http://graal.ens-lyon.fr/~alegrand/articles/Simgrid-Introduction.pdf">slides</a>
+<a href="http://graal.ens-lyon.fr/~alegrand/articles/slides_g5k_simul.pdf">slides</a>
+(or to these
+<a href="http://graal.ens-lyon.fr/~alegrand/articles/Simgrid-Introduction.pdf">"obsolete" slides</a>)
may give you some insights on what SimGrid can help you to do and what
are its limitations. Then you definitely should read the \ref
MSG_examples. There is also a mailing list: <simgrid-user@lists.gforge.inria.fr>.
- It was really boring to write 25,000 entries in the deployment file, so I wrote
a little script <tt>examples/gras/tokenS/make_deployment.pl</tt>, which you may
- want to adapt to your case.
+ want to adapt to your case. You could also think about hijacking
+ the SURFXML parser (have look at \ref faq_flexml_bypassing).
- The deployment file became quite big, so I had to do what is in the FAQ
entry \ref faq_flexml_limit
the development of FleXML, I can grant you that any patches would be really
welcome and quickly integrated.
+\subsection faq_gras_transport GRAS spits networking error messages
+
+Gras, on real platforms, naturally use regular sockets to communicate. They
+are deeply hiden in the gras abstraction, but when things go wrong, you may
+get some weird error messages. Here are some example, with the probable
+reason:
+
+ - <b>Transport endpoint is not connected</b>: several processes try to open
+ a server socket on the same port number of the same machine. This is
+ naturally bad and each process should pick its own port number for this.\n
+ Maybe, you just have some processes remaining from a previous experiment
+ on your machine.\n
+ Killing them may help, but again if you kill -KILL them, you'll have to
+ wait for a while: they didn't close there sockets properly and the system
+ needs a while to notice that this port is free again.
+
+ - <b>Socket closed by remote side</b>: if the remote process is not
+ supposed to close the socket at this point, it may be dead.
+
+ - <b>Connection reset by peer</b>: I found this on internet about this
+ error. I think it's what's happening here, too:\n
+ <i>This basically means that a network error occurred while the client was
+ receiving data from the server. But what is really happening is that the
+ server actually accepts the connection, processes the request, and sends
+ a reply to the client. However, when the server closes the socket, the
+ client believes that the connection has been terminated abnormally
+ because the socket implementation sends a TCP reset segment telling the
+ client to throw away the data and report an error.\n
+ Sometimes, this problem is caused by not properly closing the
+ input/output streams and the socket connection. Make sure you close the
+ input/output streams and socket connection properly. If everything is
+ closed properly, however, and the problem persists, you can work around
+ it by adding a one-second sleep before closing the streams and the
+ socket. This technique, however, is not reliable and may not work on all
+ systems.</i>\n
+ Since GRAS sockets are closed properly (repeat after me: there is no bug
+ in GRAS), it is either that you are closing your sockets on server side
+ before the client get a chance to read them (use gras_os_sleep() to delay
+ the server), or the server died awfully before the client got the data.
+
+
\subsection faq_deadlock There is a deadlock !!!
Unfortunately, we cannot debug every code written in SimGrid. We
on your side... We have plenty of FAQ entries to redact and new
features to implement for the impenitents! ;)
+\subsection faq_big_fat_warning A BIG FAT WARNING is reported telling me that my platform and deployment files are too old.
+
+We have decided to change the units in SimGrid. Now we use Bytes, Flops and
+seconds instead of MBytes, MFlops and seconds... Units should be updated
+accordingly and the version of platform_description should be set to a
+valuer greater than 1:
+\verbatim
+ <platform_description version="1">
+\endverbatim
+You should try to use the surfxml_update.pl script that can be found
+<a href="http://gforge.inria.fr/plugins/scmcvs/cvsweb.php/contrib/platform_generation/?cvsroot=cvsroot%2Fsimgrid">here</a>.
+
\author Arnaud Legrand (arnaud.legrand::imag.fr)
\author Martin Quinson (martin.quinson::loria.fr)
