Attribute name | Mandatory | Values | Description
--------------- | --------- | ------ | -----------
id | yes | String | The identifier of the host. facilitates referring to this AS.
-power | yes | double (must be > 0.0) | Computational power of every core of this host in FLOPS. Must be larger than 0.0.
+speed | yes | double (must be > 0.0) | Computational power of every core of this host in FLOPS. Must be larger than 0.0.
core | no | int (Default: 1) | The number of cores of this host. If more than one core is specified, the "power" parameter refers to every core, i.e., the total computational power is no_of_cores*power.<br /> If 6 cores are specified, up to 6 tasks can be executed without sharing the computational power; if more than 6 tasks are executed, computational power will be shared among these tasks. <br /> <b>Warning:</b> Although functional, this model was never scientifically assessed.
-availability | no | int | <b>Specify if the percentage of power available.</b> (What? TODO)
availability_file| no | string | (Relative or absolute) filename to use as input; must contain availability traces for this host. The syntax of this file is defined below. <br /> <b>Note:</b> The filename must be specified with your system's format.
-state | no | ON\|OFF<br/> (Default: ON) | Is this host running or not?
state_file | no | string | Same mechanism as availability_file.<br /> <b>Note:</b> The filename must be specified with your system's format.
coordinates | no | string | Must be provided when choosing the Vivaldi, coordinate-based routing model for the AS the host belongs to. More details can be found in the Section \ref pf_P2P_tags.
+pstate | no | double (Default: 0.0) | FIXME: Not yet documented.
### Possible children: ###
limiter_link | no | int | Bandwidth for limiter link (if any). This adds a specific link for each node, to set the maximum bandwidth reached when communicating in both directions at the same time. In theory this value should be 2*bw for fullduplex links, but in reality this might be less. This value will depend heavily on the communication model, and on the cluster's hardware, so no default value can be set, this has to be measured. More details can be obtained in <a href="https://hal.inria.fr/hal-00919507/"> "Toward Better Simulation of MPI Applications on Ethernet/TCP Networks"</a>
loopback_bw | no | int | Bandwidth for loopback (if any). See <b>link</b> section for syntax/details. If loopback_bw and loopback_lat (see below) attributes are omitted, no loopback link is created and all intra-node communication will use the main network link of the node. Loopback link is a \ref pf_sharing_policy_fatpipe "\b FATPIPE".
loopback_lat | no | int | Latency for loopback (if any). See <b>link</b> section for syntax/details. See loopback_bw for more info.
-topology | no | FLAT\|TORUS\|FAT_TREE (default: FLAT) | Network topology to use. SimGrid currently supports FLAT (with or without backbone, as described before), <a href="http://en.wikipedia.org/wiki/Torus_interconnect">TORUS </a> and FAT_TREE attributes for this tag.
-topo_parameters | no | string | Specific parameters to pass for the topology defined in the topology tag. For torus networks, comma-separated list of the number of nodes in each dimension of the torus. For fat trees, refer to \ref simgrid::surf::AsClusterFatTree "AsClusterFatTree documentation".
+topology | no | FLAT\|TORUS\|FAT_TREE\|DRAGONFLY (default: FLAT) | Network topology to use. SimGrid currently supports FLAT (with or without backbone, as described before), <a href="http://en.wikipedia.org/wiki/Torus_interconnect">TORUS </a>, FAT_TREE, and DRAGONFLY attributes for this tag.
+topo_parameters | no | string | Specific parameters to pass for the topology defined in the topology tag. For torus networks, comma-separated list of the number of nodes in each dimension of the torus. For fat trees, refer to \ref simgrid::kernel::routing::AsClusterFatTree "AsClusterFatTree documentation". For dragonfly, refer to \ref simgrid::kernel::routing::AsClusterDragonfly "AsClusterDragonfly documentation".
-TODO
the router name is defined as the resulting String in the following
java line of code:
is just some doc valuable only at the time of writing.
This section describes the storage management under SimGrid ; nowadays
it's only usable with MSG. It relies basically on linux-like concepts.
- You also may want to have a look to its corresponding section in \ref
- msg_file_management ; access functions are organized as a POSIX-like
+ You also may want to have a look to its corresponding section in
+ @ref msg_file ; access functions are organized as a POSIX-like
interface.
\subsubsection pf_sto_conc Storage - Main Concepts
produce good platform and some choices you can make in order to have
faster simulations. Here's some hints and tips, then.
+@subsection Finding the platform example that you need
+
+Most platform files that we ship are in the @c examples/platforms
+folder. The good old @c grep tool can find the examples you need when
+wondering on a specific XML tag. Here is an example session searching
+for @ref pf_trace "trace_connect":
+
+@verbatim
+% cd examples/platforms
+% grep -R -i -n --include="*.xml" "trace_connect" .
+./two_hosts_platform_with_availability_included.xml:26:<trace_connect kind="SPEED" trace="A" element="Cpu A"/>
+./two_hosts_platform_with_availability_included.xml:27:<trace_connect kind="HOST_AVAIL" trace="A_failure" element="Cpu A"/>
+./two_hosts_platform_with_availability_included.xml:28:<trace_connect kind="SPEED" trace="B" element="Cpu B"/>
+./two_hosts.xml:17: <trace_connect trace="Tremblay_power" element="Tremblay" kind="SPEED"/>
+@endverbatim
+
\subsection pf_as_h AS Hierarchy
The AS design allows SimGrid to go fast, because computing route is
done only for the set of resources defined in this AS. If you're using
