# members were ordinary class members. Constructors, destructors and assignment
# operators of the base classes will not be shown.
-INLINE_INHERITED_MEMB = YES
+INLINE_INHERITED_MEMB = NO
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
# path before files name in the file list and in the header files. If set
# If left blank the directory from which doxygen is run is used as the
# path to strip.
-STRIP_FROM_PATH = @srcdir@
+STRIP_FROM_PATH = @top_srcdir@
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
# the path mentioned in the documentation of a class, which tells
TYPEDEF_HIDES_STRUCT = NO
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
-
-SYMBOL_CACHE_SIZE = 0
-
# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
# their name and scope. Since this can be an expensive process and often the
INPUT = doxygen/index.doc \
doxygen/getting_started.doc \
+ doxygen/getting_started_index.doc \
doxygen/introduction.doc \
doxygen/install.doc \
- doxygen/use.doc \
+ doxygen/examples.doc \
doxygen/platform.doc \
doxygen/deployment.doc \
doxygen/options.doc \
doxygen/inside_doxygen.doc \
doxygen/inside_extending.doc \
doxygen/inside_cmake.doc \
- doxygen/inside_autotests.doc \
+ doxygen/inside_ci.doc \
doxygen/inside_release.doc \
doxygen/contributing.doc \
doxygen/tracing.doc \
doxygen/module-sd.doc \
doxygen/module-surf.doc \
doxygen/module-simix.doc \
+ doxygen/module-smpi.doc \
doxygen/module-trace.doc \
index-API.doc \
@top_srcdir@/doc/doxygen/logcategories.doc \
@top_srcdir@/src/instr/ \
+ @bindir@/include \
@top_srcdir@/include/ \
- @top_srcdir@/include/msg \
@top_srcdir@/include/xbt \
- @top_srcdir@/include/simdag \
@top_srcdir@/include/simgrid \
@top_srcdir@/src/include/surf \
@top_srcdir@/src/xbt/ \
@top_srcdir@/src/surf/ \
+ @top_srcdir@/src/surf/plugins/ \
@top_srcdir@/src/msg/ \
@top_srcdir@/src/simdag \
- @top_srcdir@/src/simix
+ @top_srcdir@/src/simix \
+ @bindir@/src
###################################################
@top_srcdir@/examples/msg/tracing/link_user_variables.c \
@top_srcdir@/examples/msg/tracing/link_srcdst_user_variables.c \
@top_srcdir@/examples/msg/ns3 \
- @top_srcdir@/examples/msg/gtnets \
@top_srcdir@/examples/msg/io \
@top_srcdir@/examples/msg/gpu \
@top_srcdir@/examples/msg/actions \
# Note that relative paths are relative to the directory from which doxygen is
# run.
-EXCLUDE =
+EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
@top_srcdir@/src/surf/ \
@top_srcdir@/src/xbt/ \
@top_srcdir@/examples \
- @top_srcdir@/testsuite
+ @top_srcdir@/doc/example_lists
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# page will contain the date and time when the page was generated. Setting
# this to NO can help when comparing the output of multiple runs.
-HTML_TIMESTAMP = YES
+HTML_TIMESTAMP = NO
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# output. When enabled you may also need to install MathJax separately and
# configure the path to it using the MATHJAX_RELPATH option.
-USE_MATHJAX = NO
+USE_MATHJAX = YES
# When MathJax is enabled you need to specify the location relative to the
# HTML output directory using the MATHJAX_RELPATH option. The destination
# However, it is strongly recommended to install a local
# copy of MathJax from http://www.mathjax.org before deployment.
-MATHJAX_RELPATH = http://www.mathjax.org/mathjax
+MATHJAX_RELPATH = https://cdn.mathjax.org/mathjax/latest/MathJax.js?config=TeX-AMS_HTML
# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
# names that should be enabled during MathJax rendering.
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output.
-GENERATE_LATEX = YES
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-# Note that when enabling USE_PDFLATEX this option is only used for
-# generating bitmaps for formulas in the HTML output, but not in the
-# Makefile that is written to the output directory.
-
-LATEX_CMD_NAME = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX = YES
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES = pdfpages
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
-# the generated latex document. The footer should contain everything after
-# the last chapter. If it is left blank doxygen will generate a
-# standard footer. Notice: only use this tag if you know what you are doing!
-
-LATEX_FOOTER =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS = YES
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES = YES
-
-# If LATEX_SOURCE_CODE is set to YES then doxygen will include
-# source code with syntax highlighting in the LaTeX output.
-# Note that which sources are shown also depends on other settings
-# such as SOURCE_BROWSER.
-
-LATEX_SOURCE_CODE = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
-# http://en.wikipedia.org/wiki/BibTeX for more info.
-
-LATEX_BIB_STYLE = plain
+GENERATE_LATEX = NO
#---------------------------------------------------------------------------
# configuration options related to the RTF output
GENERATE_XML = NO
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING = YES
-
#---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
PREDEFINED = DOXYGEN \
DOXYGEN_SKIP_IT \
- XBT_PUBLIC= \
+ XBT_PUBLIC(type)="extern type" \
+ XBT_EXPORT_NO_IMPORT(type)=type \
+ XBT_IMPORT_NO_EXPORT(type)=type \
+ XBT_PUBLIC_DATA(type)="extern type" \
+ XBT_PUBLIC_CLASS=class \
XBT_INLINE= \
- HAVE_TRACING \
MSG_USE_DEPRECATED
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then