-<?xml version='1.0'?>
-<!DOCTYPE platform SYSTEM "http://simgrid.gforge.inria.fr/simgrid.dtd">
-<platform version="3">
-<AS id="AS0" routing="Full">
- <!-- Multiple pstate processor capacities can be defined as a list of powers specified for a given host -->
- <!-- The enabled pstate can be set through the "pstate" attribute (lowest pstate corresponds to the highest processor power) -->
- <host id="MyHost1" power="100.0Mf,50.0Mf,20.0Mf" pstate="0" >
- <!-- List of min_power:max_power pairs (in Watts) corresponding to the power consumed when the processor is idle and when it is fully loaded -->
- <!-- The list must contain one power pair for each previously defined pstate-->
- <prop id="power_per_state" value="95.0:200.0, 93.0:170.0, 90.0:150.0" />
- </host>
- <host id="MyHost2" power="100.0Mf" >
- <prop id="power_per_state" value="95.0:200.0" />
- </host>
-
- <link id="link1" bandwidth="100kBps" latency="0"/>
- <route src="MyHost1" dst="MyHost2"><link_ctn id="link1"/></route>
-
-</AS>
+<?xml version='1.0' encoding='utf-8'?>
+<!DOCTYPE platform SYSTEM "https://simgrid.org/simgrid.dtd">
+<platform version="4.1">
+ <zone id="AS0" routing="Full">
+ <!-- Multiple pstate processor capacities can be defined as a list of powers specified for a given host -->
+ <!-- Attribute 'pstate' specifies the initialy selected pstate (here, the lowest pstate corresponds to the highest
+ processor speed) -->
+ <host core="4" id="MyHost1" pstate="0" speed="100.0Mf,50.0Mf,20.0Mf">
+ <!-- List of Idle:Epsilon:AllCores (in Watts) corresponding to the speed consumed when the processor is idle,
+ when all cores have a tiny epsilon load, and when all cores are fully loaded -->
+ <!-- The list must contain one energetic profile for each previously defined pstate-->
+ <prop id="wattage_per_state" value="100.0:93.33333333333333:200.0, 93.0:90.0:170.0, 90.0:90.0:150.0" />
+ <prop id="wattage_off" value="10" />
+ </host>
+
+ <host core="1" id="MyHost2" pstate="0" speed="100.0Mf,50.0Mf,20.0Mf">
+ <!-- This host is mono-core and its consumption is either idle or full load (Epsilon=AllCores) -->
+ <prop id="wattage_per_state" value="100.0:200.0:200.0, 93.0:170.0:170.0, 90.0:150.0:150.0" />
+ <prop id="wattage_off" value="10" />
+ </host>
+
+ <host core="1" id="MyHost3" pstate="0" speed="100.0Mf,50.0Mf,20.0Mf">
+ <!-- This host is mono-core and its consumption is either idle or full load (Epsilon=AllCores) -->
+ <prop id="wattage_per_state" value="100.0:200.0:200.0, 93.0:170.0:170.0, 90.0:150.0:150.0" />
+ <prop id="wattage_off" value="10" />
+ </host>
+
+ <link bandwidth="100kBps" id="bus" latency="0" sharing_policy="SHARED">
+<!-- REALISTIC VALUES <prop id="wattage_range" value="10.3581:10.7479" /> -->
+<!-- IREALISTIC VALUES FOR THE TEST --> <prop id="wattage_range" value="1:3" />
+ </link>
+ <route dst="MyHost2" src="MyHost1">
+ <link_ctn id="bus" />
+ </route>
+ <route dst="MyHost3" src="MyHost1">
+ <link_ctn id="bus" />
+ </route>
+ <route dst="MyHost3" src="MyHost2">
+ <link_ctn id="bus" />
+ </route>
+ </zone>
</platform>