+++ /dev/null
-#!/usr/bin/env tesh
-
-p Test WITH crosstraffic
-$ ${bindir:=.}/wifi_usage ${platfdir}/wifi.xml --log=root.fmt=%m%n
-> TEST: Send from a station to a node on the wired network after the AP.
-> ----------------------------------------------------------------------
-> Since AP1 is the limiting link, we have the following constraint for AP1:
-> 1.05/r_STA1 * rho_STA1 <= 1 (1.05 instead of 1 because of cross-traffic)
-> We should thus have:
-> mu = 1 / [ 1/1 * 1.05/54Mbps ] = 51428571
-> simulation_time = 1000*8 / mu = 0.0001555556s (rounded to 0.000156s in SimGrid)
-> Actual result: Sending 1000 bytes from 'Station 1' to 'NODE1' takes 0.000156 seconds.
->
->
-> TEST: Send from a station to another station on the same AP.
-> ------------------------------------------------------------
-> We have the following constraint for AP1:
-> 1.05/r_STA1 * rho_STA1 + 1.05/r_STA2 * rho_2 <= 1 (1.05 instead of 1 because of cross-traffic)
-> We should thus have:
-> mu = 1 / [ 1/2 * 1.05/54Mbps + 1.05/54Mbps ] = 51428571
-> simulation_time = 1000*8 / [ mu / 2 ] = 0.0003111111s
-> Actual result: Sending 1000 bytes from 'Station 1' to 'Station 2' takes 0.000311 seconds.
-
-p Test WITHOUT crosstraffic
-$ ${bindir:=.}/wifi_usage ${platfdir}/wifi.xml --log=root.fmt=%m%n --cfg=network/crosstraffic:0
-> Configuration change: Set 'network/crosstraffic' to '0'
-> TEST: Send from a station to a node on the wired network after the AP.
-> ----------------------------------------------------------------------
-> Since AP1 is the limiting link, we have the following constraint for AP1:
-> 1/r_STA1 * rho_STA1 <= 1 (there is no cross-traffic)
-> We should thus have:
-> mu = 1 / [ 1/1 * 1/54Mbps ] = 5.4e+07
-> simulation_time = 1000*8 / mu = 0.0001481481s
-> Actual result: Sending 1000 bytes from 'Station 1' to 'NODE1' takes 0.000148 seconds.
->
->
-> TEST: Send from a station to another station on the same AP.
-> ------------------------------------------------------------
-> We have the following constraint for AP1:
-> 1/r_STA1 * rho_STA1 + 1/r_STA2 * rho_2 <= 1 (there is no cross-traffic)
-> mu = 1 / [ 1/2 * 1/54Mbps + 1/54Mbps ] = 5.4e+07
-> simulation_time = 1000*8 / [ mu / 2 ] = 0.0002962963s
-> Actual result: Sending 1000 bytes from 'Station 1' to 'Station 2' takes 0.000296 seconds.
