-<?xml version='1.0'?>
-<!DOCTYPE platform SYSTEM "https://simgrid.org/simgrid.dtd">
-<platform version="4.1">
- <zone id="AS0" routing="Full">
-
- <!-- Use the pstate mechanism to encode the boot/shutdown time and energy.
- -
- - See the C++ file in the same directory for more information.
- -->
-
- <!-- pstate values:
- * 0-2: real pstates
- 0: p1 100 MFlops/s, [idle: 95W -> full burning: 200W]
- 1: p2 50 MFlops/s, [idle: 93W -> full burning: 170W]
- 2: p3 20 MFlops/s, [idel: 90W -> full burning: 150W]
-
- * 3: booting up was measured to take 150s and 18000J.
- So we create a pstate 3 consuming 18000J/150s=120W, and a boot remains at this pstate for 150s.
- Speed is set at 0 flop/s so that nothing progresses during the boot.
- * 4: shutting down was measured to take 7 s and 770 J
- So we create a pstate 4 consuming 770J/7s=110W, and a shutdown remains at this pstate for 7s.
-
- Please note that even if these values are educated guesses, you should still challenge them.
- If you want a realistic simulation, you must use values coming from a real benchmark of your platform.
- -->
-
- <host id="MyHost1" speed="100.0Mf,50.0Mf,20.0Mf, 0f,0f" pstate="0" >
- <prop id="wattage_per_state" value="95.0:200.0,93.0:170.0,90.0:150.0, 120:120,110:110" />
- <prop id="wattage_off" value="10" />
- </host>
- <host id="MyHost2" speed="100.0Mf" >
- <prop id="wattage_per_state" value="100.0:200.0" />
- <prop id="wattage_off" value="10" />
- </host>
-
- <link id="link1" bandwidth="100kBps" latency="0"/>
- <route src="MyHost1" dst="MyHost2">
- <link_ctn id="link1"/>
- </route>
- </zone>
-</platform>
