1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
19 INCLUDE(CheckCCompilerFlag)
20 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
22 ## Request full debugging flags
23 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
24 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
25 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
27 if (CMAKE_COMPILER_IS_GNUCC)
28 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
30 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
31 "You need a sufficient support of c++11 to compile SimGrid.")
35 ## We need a decent support of the c++11 standard
36 include(CheckCXXCompilerFlag)
37 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
38 if(COMPILER_SUPPORTS_CXX11)
39 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
42 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
43 "Please use a decent C++ compiler.")
46 ### And we need C11 standard, too
47 include(CheckCCompilerFlag)
48 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
49 if(COMPILER_SUPPORTS_C11)
50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
53 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
54 "Please use a decent C compiler "
55 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
57 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
58 ### gcc 4.[1-5] cannot compile ucontext on OSX
59 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
60 set(HAVE_UCONTEXT_H 0)
65 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
68 if ((NOT DEFINED enable_smpi) OR enable_smpi)
69 # First unset the compiler in case we're re-running cmake over a previous
70 # configuration where it was saved as smpiff
71 unset(CMAKE_Fortran_COMPILER)
75 enable_language(Fortran OPTIONAL)
78 if(CMAKE_Fortran_COMPILER)
79 # Fortran compiler detected: save it, then replace by smpiff
80 set(SAVED_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
81 set(CMAKE_Fortran_COMPILER smpiff)
83 endif(CMAKE_Fortran_COMPILER)
87 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
88 # Build the version number #
89 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
91 set(SIMGRID_VERSION_MAJOR "3")
92 set(SIMGRID_VERSION_MINOR "16")
93 set(SIMGRID_VERSION_PATCH "0")
94 set(SIMGRID_VERSION_EXTRA "-DEVEL") # Extra words to add to version string (e.g. -rc1)
96 set(SIMGRID_VERSION_DATE "2017") # Year for copyright information
98 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
99 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
101 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
104 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
106 set(libsimgrid_version "${release_version}")
107 set(libsimgrid-java_version "${release_version}")
109 ### SET THE LIBRARY EXTENSION
119 execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION ERROR_VARIABLE LINKER_VERSION)
120 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
122 ### Set the library providing dlopen
123 if("${CMAKE_SYSTEM}" MATCHES "Linux")
124 find_library(DL_LIBRARY dl)
125 endif("${CMAKE_SYSTEM}" MATCHES "Linux")
127 ### Find programs and paths
128 FIND_PROGRAM(GCOV_PATH gcov)
131 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
134 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
135 set(PythonInterp_FIND_VERSION 3)
136 set(PythonInterp_FIND_VERSION_COUNT 1)
137 set(PythonInterp_FIND_VERSION_MAJOR 3)
138 include(FindPythonInterp)
139 if(NOT PYTHONINTERP_FOUND)
140 message(FATAL_ERROR "Please install Python (version 3 or higher).")
144 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
145 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
147 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
149 ### Compute the include paths
151 ${CMAKE_HOME_DIRECTORY}
152 ${CMAKE_HOME_DIRECTORY}/include
153 ${CMAKE_HOME_DIRECTORY}/src/include
155 ${CMAKE_BINARY_DIR}/include
158 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
159 set(INCLUDES ${INCLUDES} /usr/include/)
163 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
164 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
165 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
166 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
167 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
168 unset(CMAKE_INCLUDE_WIN)
171 include_directories(${INCLUDES})
173 # library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
174 set(SIMGRID_DEP "-lm")
176 ### Determine the assembly flavor that we need today
177 set(HAVE_RAW_CONTEXTS 0)
178 include(CMakeDetermineSystem)
179 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
180 IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
181 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
182 set(SIMGRID_PROCESSOR_i686 1)
183 set(SIMGRID_PROCESSOR_x86_64 0)
185 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
186 set(SIMGRID_PROCESSOR_i686 0)
187 set(SIMGRID_PROCESSOR_x86_64 1)
190 message(STATUS "Disable fast raw contexts on Windows.")
192 set(HAVE_RAW_CONTEXTS 1)
195 set(SIMGRID_PROCESSOR_i686 0)
196 set(SIMGRID_PROCESSOR_x86_64 0)
199 include(CheckFunctionExists)
200 include(CheckTypeSize)
201 include(CheckIncludeFile)
202 include(CheckIncludeFiles)
203 include(CheckLibraryExists)
204 include(CheckSymbolExists)
207 include(FindGraphviz)
209 set(SIMGRID_HAVE_LUA 0)
211 include(FindLuaSimgrid)
214 set(SIMGRID_HAVE_NS3 0)
217 if (SIMGRID_HAVE_NS3)
218 set(SIMGRID_HAVE_NS3 1)
220 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
225 set(Boost_USE_STATIC_LIBS 1)
231 message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
235 # Not finding this is perfectly OK
236 find_package(Boost COMPONENTS unit_test_framework)
237 if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
238 message("-- (enabling the Boost-based unit tests)")
240 message("-- (disabling the Boost-based unit tests -- please install libboost-test-dev)")
244 find_package(Boost 1.48)
246 include_directories(${Boost_INCLUDE_DIRS})
249 message(FATAL_ERROR "Boost libraries not found. Try to install them with 'sudo fink install boost1.53.nopython' (check the exact name with 'fink list boost') or 'sudo brew install boost'")
251 message(FATAL_ERROR "Boost libraries not found. Install libboost-dev (>= 1.48.0).")
255 #Boost context 1.61 will break compatibility with our implementation.
256 #Warn users about that
257 find_package(Boost 1.61 COMPONENTS context)
259 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
260 message(" WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
263 set(HAVE_BOOST_CONTEXTS 0)
265 # Try again to see if we have libboost-context
266 find_package(Boost 1.42 COMPONENTS context)
267 set(Boost_FOUND 1) # We don't care of whether this component is missing
269 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
270 # We should use feature detection for this instead:
271 if (Boost_VERSION LESS 105600)
272 message("Found Boost.Context API v1")
273 set(HAVE_BOOST_CONTEXTS 1)
275 message("Found Boost.Context API v2")
276 set(HAVE_BOOST_CONTEXTS 2)
279 message (" boost : found.")
280 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
281 set(HAVE_BOOST_CONTEXTS 0)
285 # Checks for header libraries functions.
286 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
288 CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
289 if(NOT APPLE) # OS X El Capitan deprecates this function
290 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
292 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
293 set(HAVE_PTHREAD_SETAFFINITY 0)
294 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
296 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
297 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
299 # Use the GNU version of unusual modifiers like PRIx64
300 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
301 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
303 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
306 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
307 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
308 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
309 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
310 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
311 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
312 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
313 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
315 CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
316 CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
317 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
318 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
319 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
320 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
321 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
322 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
323 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
324 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
326 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
328 # The detection of vasprintf fails on MinGW, assumingly because it's
329 # defined as an inline function in stdio.h instead of a regular
330 # function. So force the result to be 1 despite of the test.
331 set(HAVE_VASPRINTF 1)
334 #Check if __thread is defined
336 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
337 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
338 RESULT_VARIABLE HAVE_thread_storage_run)
339 file(REMOVE testprog)
340 if(HAVE_thread_storage_run)
341 set(HAVE_THREAD_LOCAL_STORAGE 1)
343 set(HAVE_THREAD_LOCAL_STORAGE 0)
346 CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
347 CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
348 if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
354 if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
355 message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
356 set(enable_model-checking FALSE)
359 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
363 if(enable_model-checking)
364 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
366 SET(enable_model-checking 0)
370 set(SIMGRID_HAVE_JEDULE 1)
372 set(SIMGRID_HAVE_JEDULE 0)
375 if(enable_mallocators)
376 SET(SIMGRID_HAVE_MALLOCATOR 1)
378 SET(SIMGRID_HAVE_MALLOCATOR 0)
381 include(FindLibunwind)
384 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind")
386 # Apple forbids to link directly against its libunwind implementation
387 # So let's comply and link against the System framework
388 SET(SIMGRID_DEP "${SIMGRID_DEP} -lSystem")
390 if("${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
391 set(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-ptrace")
392 # This supposes that the host machine is either an AMD or a X86.
393 # This is deeply wrong, and should be fixed by manually loading -lunwind-PLAT (FIXME)
394 if(SIMGRID_PROCESSOR_x86_64)
395 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86_64")
397 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86")
401 if(enable_model-checking)
402 message(FATAL_ERROR "Please either install the libunwind7-dev package (or equivalent) or turn off the model-checking option of SimGrid.")
406 if(enable_model-checking)
407 find_package(Libdw REQUIRED)
408 find_package(Libevent REQUIRED)
409 include_directories(${LIBDW_INCLUDE_DIR} ${LIBEVENT_INCLUDE_DIR})
410 set(SIMGRID_DEP "${SIMGRID_DEP} ${LIBEVENT_LIBRARIES} ${LIBDW_LIBRARIES}")
411 set(SIMGRID_HAVE_MC 1)
412 if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_java)
413 message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling java")
414 set(enable_java FALSE)
417 SET(SIMGRID_HAVE_MC 0)
421 if (enable_model-checking AND enable_ns3)
422 message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
427 if("${CMAKE_SYSTEM}" MATCHES "Darwin|FreeBSD|Linux")
429 SET(HAVE_PRIVATIZATION 1)
431 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
432 SET(HAVE_PRIVATIZATION 0)
438 #--------------------------------------------------------------------------------------------------
439 ### Check for GNU dynamic linker
440 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
442 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
443 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
444 OUTPUT_VARIABLE HAVE_GNU_LD_compil
446 if(HAVE_GNU_LD_compil)
448 message(STATUS "Warning: test program toward GNU ld failed to compile:")
449 message(STATUS "${HAVE_GNU_LD_comp_output}")
451 execute_process(COMMAND ./test_gnu_ld
452 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
453 RESULT_VARIABLE HAVE_GNU_LD_run
454 OUTPUT_VARIABLE var_exec
457 if(NOT HAVE_GNU_LD_run)
459 message(STATUS "We are using GNU dynamic linker")
462 message(STATUS "Warning: error while checking for GNU ld:")
463 message(STATUS "Test output: '${var_exec}'")
464 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
466 file(REMOVE test_gnu_ld)
470 #--------------------------------------------------------------------------------------------------
471 ### Initialize of CONTEXT THREADS
473 set(HAVE_THREAD_CONTEXTS 0)
475 ### Test that we have a way to create semaphores
477 if(HAVE_SEM_OPEN_LIB)
478 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
479 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
480 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
483 # Test sem_open by compiling:
484 if(HAVE_SEM_OPEN_compil)
486 message(STATUS "Warning: sem_open not compilable")
487 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
490 message(STATUS "sem_open is compilable")
493 # If we're not crosscompiling, we check by executing the program:
494 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
495 execute_process(COMMAND ./sem_open
496 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
497 RESULT_VARIABLE HAVE_SEM_OPEN_run
498 OUTPUT_VARIABLE var_compil
500 if (NOT HAVE_SEM_OPEN_run)
502 message(STATUS "sem_open is executable")
505 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
506 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
508 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
510 message(STATUS "Warning: sem_open not executable")
511 message(STATUS "Compilation output: '${var_compil}'")
512 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
515 file(REMOVE sem_open)
520 if(HAVE_SEM_INIT_LIB)
521 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
522 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
523 RESULT_VARIABLE HAVE_SEM_INIT_run
524 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
526 # Test sem_init by compiling:
527 if(HAVE_SEM_INIT_compil)
529 message(STATUS "Warning: sem_init not compilable")
530 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
533 message(STATUS "sem_init is compilable")
536 # If we're not crosscompiling, we check by executing the program:
537 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
538 execute_process(COMMAND ./sem_init
539 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
540 RESULT_VARIABLE HAVE_SEM_INIT_run
541 OUTPUT_VARIABLE var_compil
543 if (NOT HAVE_SEM_INIT_run)
545 message(STATUS "sem_init is executable")
548 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
549 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
551 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
553 message(STATUS "Warning: sem_init not executable")
554 message(STATUS "Compilation output: '${var_compil}'")
555 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
558 file(REMOVE sem_init)
563 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
564 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
567 set(HAVE_THREAD_CONTEXTS 1)
568 message("-- Support for thread context factory ok.")
571 set(HAVE_UCONTEXT_CONTEXTS 0)
572 if(NOT HAVE_UCONTEXT_H)
573 message("-- No ucontext factory: <ucontext.h> not found.")
575 message("-- No ucontext factory: Apple don't want us to use them.")
576 set(HAVE_UCONTEXT_H 0)
578 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
579 OUTPUT_VARIABLE compile_makecontext_output)
581 #If can have both context
582 if(compile_makecontext)
583 set(HAVE_UCONTEXT_CONTEXTS 1)
584 message("-- Support for ucontext factory ok.")
586 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
587 message("-- No ucontext factory: makecontext() is not compilable.")
590 # Stack setup (size and address)
591 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
592 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
593 RUN_OUTPUT_VARIABLE stack_setup)
595 LIST(LENGTH stack_setup stack_setup_len)
596 if("${stack_setup_len}" STREQUAL "2")
597 LIST(GET stack_setup 0 makecontext_addr)
598 LIST(GET stack_setup 1 makecontext_size)
599 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
600 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
602 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
606 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
607 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
609 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
610 RUN_OUTPUT_VARIABLE stack
611 COPY_FILE test_stackgrowth)
613 if("${stack}" STREQUAL "down")
614 set(PTH_STACKGROWTH "-1")
615 elseif("${stack}" STREQUAL "up")
616 set(PTH_STACKGROWTH "1")
618 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
619 set(PTH_STACKGROWTH "-1")
620 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
621 set(PTH_STACKGROWTH "-1")
623 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
626 # If the test ran well, remove the test binary
627 file(REMOVE test_stackgrowth)
628 #--------------------------------------------------------------------------------------------------
630 ### check for addr2line
631 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
633 set(ADDR2LINE "${ADDR2LINE}/addr2line")
639 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
643 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
644 OUTPUT_VARIABLE remote
645 OUTPUT_STRIP_TRAILING_WHITESPACE)
646 #message(STATUS "Git remote: ${remote}")
647 execute_process(COMMAND git config --get remote.${remote}.url
648 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
650 OUTPUT_STRIP_TRAILING_WHITESPACE)
651 #message(STATUS "Git url: ${url}")
653 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
654 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
655 OUTPUT_VARIABLE GIT_VERSION
656 OUTPUT_STRIP_TRAILING_WHITESPACE)
657 message(STATUS "Git version: ${GIT_VERSION}")
659 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
660 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
661 OUTPUT_VARIABLE GIT_DATE
662 OUTPUT_STRIP_TRAILING_WHITESPACE)
663 message(STATUS "Git date: ${GIT_DATE}")
664 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
666 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
667 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
668 OUTPUT_VARIABLE SIMGRID_GITHASH
669 OUTPUT_STRIP_TRAILING_WHITESPACE)
671 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
672 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
674 set(GIT_VERSION "none, release version")
677 ### Generate the required headers and scripts
678 #############################################
680 # Avoid triggering a (full) rebuild by touching the files if they did not really change
681 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
682 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
683 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
684 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
685 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
686 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
688 # We need two versions of the SMPI scripts because they contain the path to the library
689 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
691 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
693 ### SMPI script used when simgrid is installed
694 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
695 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
696 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
697 set(libdir ${exec_prefix}/lib)
698 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
700 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
702 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
703 set(SMPIMAIN smpimain)
705 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
706 foreach(script cc cxx ff f90 run)
707 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
710 ### SMPI scripts used when compiling simgrid
711 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
712 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
713 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
714 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
715 set(libdir "${CMAKE_BINARY_DIR}/lib")
716 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
718 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
720 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
721 set(SMPIMAIN ${CMAKE_BINARY_DIR}/bin/smpimain)
723 foreach(script cc cxx ff f90 run)
724 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
728 foreach(script cc cxx ff f90 run)
729 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
730 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
734 set(generated_headers_to_install
735 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
736 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
739 set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
741 set(generated_files_to_clean
743 ${generated_headers_to_install}
744 ${CMAKE_BINARY_DIR}/bin/smpicc
745 ${CMAKE_BINARY_DIR}/bin/smpicxx
746 ${CMAKE_BINARY_DIR}/bin/smpiff
747 ${CMAKE_BINARY_DIR}/bin/smpif90
748 ${CMAKE_BINARY_DIR}/bin/smpirun
749 ${CMAKE_BINARY_DIR}/bin/colorize
750 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
751 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
754 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
755 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
756 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
757 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
758 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
759 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
761 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
772 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
777 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
778 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
779 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
780 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
781 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
782 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
783 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
784 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
785 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
786 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
787 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
788 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
789 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
790 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
791 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
792 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
793 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
794 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
795 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
796 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
797 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
798 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
799 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
800 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
801 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
802 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
803 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
805 set(generated_files_to_clean
806 ${generated_files_to_clean}
807 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
808 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
809 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
810 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
812 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
819 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
823 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
828 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
829 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
830 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
831 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
832 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
833 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
834 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
835 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
836 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
837 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
838 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
839 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
840 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
841 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
842 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
843 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
844 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
845 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
846 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
847 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
848 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
849 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
850 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
851 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
852 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
853 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
854 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
858 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
859 "${generated_files_to_clean}")
861 ### Define source packages for Libs
862 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
864 ### Build some Maintainer files
865 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
866 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
868 ### Setup gcc & clang flags
870 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
875 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
877 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
881 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
885 if(enable_memcheck_xml)
886 set(enable_memcheck true)
891 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
892 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
894 ### Define subdirectories
895 foreach(cmakefile ${CMAKEFILES_TXT})
896 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
897 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
900 ### Setup the distrib
901 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
903 ### Build the docs if asked to
904 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
906 ### Print the result of configuration
908 message("##########################################")
909 message("#### Content of src/internal_config.h ####")
910 message("##########################################")
911 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
912 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
913 foreach(line ${config_output})
916 message("##########################################")
917 message("#### Content of simgrid_config.h ####")
918 message("##########################################")
919 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
920 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
921 foreach(line ${config_output})
924 message("##########################################")
925 message("#### End of configuration headers ####")
926 message("##########################################")
928 message("\nConfiguration of package `simgrid':")
929 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
930 message(" Build Name ..................: ${BUILDNAME}")
931 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
932 message(" Site ........................: ${SITE}")
933 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
935 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
937 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
940 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
941 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
942 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
943 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
944 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
946 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
947 message(" version .............: ${Java_VERSION_STRING}")
949 message(" SWIG ................: Version ${SWIG_VERSION} found.")
951 message(" SWIG ................: Missing.")
954 if(CMAKE_Fortran_COMPILER)
955 message(" Compiler: Fortran ...........: ${SAVED_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
956 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
958 message(" Linker: .....................: ${CMAKE_LINKER}")
959 message(" version .............: ${LINKER_VERSION}")
960 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
962 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
963 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
964 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
965 message(" with LTO ....................: ${enable_lto}")
968 if (SIMGRID_HAVE_NS3)
969 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
971 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
975 message(" Compile Java ................: yes")
976 message(" Native lib in jar .........: ${enable_lib_in_jar}")
978 message(" Compile Java ................: NO")
980 message(" Compile Lua .................: ${SIMGRID_HAVE_LUA}")
981 message(" Compile Smpi ................: ${HAVE_SMPI}")
982 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
983 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
984 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
985 message(" PAPI support...............: ${HAVE_PAPI}")
986 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
988 message(" Maintainer mode .............: ${enable_maintainer_mode}")
989 message(" Documentation................: ${enable_documentation}")
990 message(" Model checking ..............: ${SIMGRID_HAVE_MC}")
991 message(" Jedule mode ................: ${SIMGRID_HAVE_JEDULE}")
992 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
993 message(" Mallocators .................: ${enable_mallocators}")
995 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
998 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
999 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
1000 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")