1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
19 INCLUDE(CheckCCompilerFlag)
20 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
22 ## Request full debugging flags
23 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
24 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
25 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
27 if (CMAKE_COMPILER_IS_GNUCC)
28 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
30 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
31 "You need a sufficient support of c++11 to compile SimGrid.")
35 ## We need a decent support of the c++11 standard
36 include(CheckCXXCompilerFlag)
37 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
38 if(COMPILER_SUPPORTS_CXX11)
39 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
42 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
43 "Please use a decent C++ compiler.")
46 ### And we need C11 standard, too
47 include(CheckCCompilerFlag)
48 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
49 if(COMPILER_SUPPORTS_C11)
50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
53 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
54 "Please use a decent C compiler "
55 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
57 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
58 ### gcc 4.[1-5] cannot compile ucontext on OSX
59 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
60 set(HAVE_UCONTEXT_H 0)
65 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
68 if ((NOT DEFINED enable_smpi) OR enable_smpi)
69 # First unset the compiler in case we're re-running cmake over a previous
70 # configuration where it was saved as smpiff
71 unset(CMAKE_Fortran_COMPILER)
75 enable_language(Fortran OPTIONAL)
78 if(CMAKE_Fortran_COMPILER)
79 # Fortran compiler detected: save it, then replace by smpiff
80 set(SAVED_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
81 set(CMAKE_Fortran_COMPILER smpiff)
83 endif(CMAKE_Fortran_COMPILER)
87 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
88 # Build the version number #
89 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
91 set(SIMGRID_VERSION_MAJOR "3")
92 set(SIMGRID_VERSION_MINOR "13")
93 set(SIMGRID_VERSION_PATCH "90")
94 set(SIMGRID_VERSION_EXTRA "-prealpha") # Extra words to add to version string (e.g. -rc1)
96 set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
98 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
99 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
101 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
104 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
106 set(libsimgrid_version "${release_version}")
107 set(libsimgrid-java_version "${release_version}")
109 ### SET THE LIBRARY EXTENSION
119 execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION)
120 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
122 ### Set the library providing dlopen
123 if("${CMAKE_SYSTEM}" MATCHES "Linux")
124 find_library(DL_LIBRARY dl)
125 endif("${CMAKE_SYSTEM}" MATCHES "Linux")
127 ### Find programs and paths
128 FIND_PROGRAM(GCOV_PATH gcov)
131 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
134 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
135 set(PythonInterp_FIND_VERSION 3)
136 set(PythonInterp_FIND_VERSION_COUNT 1)
137 set(PythonInterp_FIND_VERSION_MAJOR 3)
138 include(FindPythonInterp)
139 if(NOT PYTHONINTERP_FOUND)
140 message(FATAL_ERROR "Please install Python (version 3 or higher).")
144 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
145 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
147 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
149 ### Compute the include paths
151 ${CMAKE_HOME_DIRECTORY}
152 ${CMAKE_HOME_DIRECTORY}/include
153 ${CMAKE_HOME_DIRECTORY}/src/include
155 ${CMAKE_BINARY_DIR}/include
158 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
159 set(INCLUDES ${INCLUDES} /usr/include/)
163 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
164 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
165 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
166 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
167 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
168 unset(CMAKE_INCLUDE_WIN)
171 include_directories(${INCLUDES})
173 # library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
174 set(SIMGRID_DEP "-lm")
176 ### Determine the assembly flavor that we need today
177 set(HAVE_RAW_CONTEXTS 0)
178 include(CMakeDetermineSystem)
179 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
180 IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
181 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
182 set(PROCESSOR_i686 1)
183 set(PROCESSOR_x86_64 0)
185 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
186 set(PROCESSOR_i686 0)
187 set(PROCESSOR_x86_64 1)
190 message(STATUS "Disable fast raw contexts on Windows.")
192 set(HAVE_RAW_CONTEXTS 1)
195 set(PROCESSOR_i686 0)
196 set(PROCESSOR_x86_64 0)
199 include(CheckFunctionExists)
200 include(CheckTypeSize)
201 include(CheckIncludeFile)
202 include(CheckIncludeFiles)
203 include(CheckLibraryExists)
204 include(CheckSymbolExists)
207 include(FindGraphviz)
211 include(FindLuaSimgrid)
218 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
223 set(Boost_USE_STATIC_LIBS 1)
229 message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
233 find_package(Boost 1.48 COMPONENTS unit_test_framework)
235 include_directories(${Boost_INCLUDE_DIRS})
238 message(FATAL_ERROR "Boost libraries not found. Try to install them with 'sudo fink install boost1.53.nopython'")
240 message(FATAL_ERROR "Boost libraries not found. Install libboost-dev libboost-test-dev (>= 1.48.0).")
244 #Boost context 1.61 will break compatibility with our implementation.
245 #Warn users about that
246 find_package(Boost 1.61 COMPONENTS context)
248 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
249 message("WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
252 set(HAVE_BOOST_CONTEXTS 0)
254 # Try again to see if we have libboost-context
255 find_package(Boost 1.42 COMPONENTS context)
256 set(Boost_FOUND 1) # We don't care of whether this component is missing
258 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
259 # We should use feature detection for this instead:
260 if (Boost_VERSION LESS 105600)
261 message("Found Boost.Context API v1")
262 set(HAVE_BOOST_CONTEXTS 1)
264 message("Found Boost.Context API v2")
265 set(HAVE_BOOST_CONTEXTS 2)
268 message (" boost : found.")
269 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
270 set(HAVE_BOOST_CONTEXTS 0)
274 # Checks for header libraries functions.
275 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
277 CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
278 if(NOT APPLE) # OS X El Capitan deprecates this function
279 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
281 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
282 set(HAVE_PTHREAD_SETAFFINITY 0)
283 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
285 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
286 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
288 # Use the GNU version of unusual modifiers like PRIx64
289 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
290 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
292 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
295 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
296 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
297 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
298 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
299 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
300 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
301 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
302 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
304 CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
305 CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
306 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
307 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
308 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
309 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
310 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
311 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
312 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
313 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
315 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
317 # The detection of vasprintf fails on MinGW, assumingly because it's
318 # defined as an inline function in stdio.h instead of a regular
319 # function. So force the result to be 1 despite of the test.
320 set(HAVE_VASPRINTF 1)
323 #Check if __thread is defined
325 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
326 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
327 RESULT_VARIABLE HAVE_thread_storage_run)
328 file(REMOVE testprog)
329 if(HAVE_thread_storage_run)
330 set(HAVE_THREAD_LOCAL_STORAGE 1)
332 set(HAVE_THREAD_LOCAL_STORAGE 0)
335 if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
336 message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
337 set(enable_model-checking FALSE)
340 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
344 if(enable_model-checking)
345 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
347 SET(enable_model-checking 0)
356 if(enable_mallocators)
357 SET(HAVE_MALLOCATOR 1)
359 SET(HAVE_MALLOCATOR 0)
362 include(FindLibunwind)
365 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind")
367 # Apple forbids to link directly against its libunwind implementation
368 # So let's comply and link against the System framework
369 SET(SIMGRID_DEP "${SIMGRID_DEP} -lSystem")
371 if("${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
372 set(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-ptrace")
373 # This supposes that the host machine is either an AMD or a X86.
374 # This is deeply wrong, and should be fixed by manually loading -lunwind-PLAT (FIXME)
376 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86_64")
378 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86")
382 if(enable_model-checking)
383 message(FATAL_ERROR "Please either install the libunwind7-dev package (or equivalent) or turn off the model-checking option of SimGrid.")
387 if(enable_model-checking)
388 find_package(Libdw REQUIRED)
389 find_package(Libevent REQUIRED)
390 include_directories(${LIBDW_INCLUDE_DIRS} ${LIBEVENT_INCLUDE_DIRS})
391 set(SIMGRID_DEP "${SIMGRID_DEP} ${LIBEVENT_LIBRARIES} ${LIBDW_LIBRARIES}")
393 if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_java)
394 message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling java")
395 set(enable_java FALSE)
402 if (enable_model-checking AND enable_ns3)
403 message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
408 if("${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
410 SET(HAVE_PRIVATIZATION 1)
412 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
413 SET(HAVE_PRIVATIZATION 0)
419 #--------------------------------------------------------------------------------------------------
420 ### Check for GNU dynamic linker
421 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
423 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
424 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
425 OUTPUT_VARIABLE HAVE_GNU_LD_compil
427 if(HAVE_GNU_LD_compil)
429 message(STATUS "Warning: test program toward GNU ld failed to compile:")
430 message(STATUS "${HAVE_GNU_LD_comp_output}")
432 execute_process(COMMAND ./test_gnu_ld
433 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
434 RESULT_VARIABLE HAVE_GNU_LD_run
435 OUTPUT_VARIABLE var_exec
438 if(NOT HAVE_GNU_LD_run)
440 message(STATUS "We are using GNU dynamic linker")
443 message(STATUS "Warning: error while checking for GNU ld:")
444 message(STATUS "Test output: '${var_exec}'")
445 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
447 file(REMOVE test_gnu_ld)
451 #--------------------------------------------------------------------------------------------------
452 ### Initialize of CONTEXT THREADS
454 set(HAVE_THREAD_CONTEXTS 0)
456 ### Test that we have a way to create semaphores
458 if(HAVE_SEM_OPEN_LIB)
459 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
460 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
461 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
464 # Test sem_open by compiling:
465 if(HAVE_SEM_OPEN_compil)
467 message(STATUS "Warning: sem_open not compilable")
468 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
471 message(STATUS "sem_open is compilable")
474 # If we're not crosscompiling, we check by executing the program:
475 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
476 execute_process(COMMAND ./sem_open
477 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
478 RESULT_VARIABLE HAVE_SEM_OPEN_run
479 OUTPUT_VARIABLE var_compil
481 if (NOT HAVE_SEM_OPEN_run)
483 message(STATUS "sem_open is executable")
486 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
487 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
489 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
491 message(STATUS "Warning: sem_open not executable")
492 message(STATUS "Compilation output: '${var_compil}'")
493 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
496 file(REMOVE sem_open)
501 if(HAVE_SEM_INIT_LIB)
502 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
503 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
504 RESULT_VARIABLE HAVE_SEM_INIT_run
505 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
507 # Test sem_init by compiling:
508 if(HAVE_SEM_INIT_compil)
510 message(STATUS "Warning: sem_init not compilable")
511 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
514 message(STATUS "sem_init is compilable")
517 # If we're not crosscompiling, we check by executing the program:
518 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
519 execute_process(COMMAND ./sem_init
520 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
521 RESULT_VARIABLE HAVE_SEM_INIT_run
522 OUTPUT_VARIABLE var_compil
524 if (NOT HAVE_SEM_INIT_run)
526 message(STATUS "sem_init is executable")
529 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
530 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
532 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
534 message(STATUS "Warning: sem_init not executable")
535 message(STATUS "Compilation output: '${var_compil}'")
536 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
539 file(REMOVE sem_init)
544 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
545 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
548 set(HAVE_THREAD_CONTEXTS 1)
549 message("-- Support for thread context factory ok.")
552 set(HAVE_UCONTEXT_CONTEXTS 0)
553 if(NOT HAVE_UCONTEXT_H)
554 message("-- No ucontext factory: <ucontext.h> not found.")
556 message("-- No ucontext factory: Apple don't want us to use them.")
557 set(HAVE_UCONTEXT_H 0)
559 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
560 OUTPUT_VARIABLE compile_makecontext_output)
562 #If can have both context
563 if(compile_makecontext)
564 set(HAVE_UCONTEXT_CONTEXTS 1)
565 message("-- Support for ucontext factory ok.")
567 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
568 message("-- No ucontext factory: makecontext() is not compilable.")
571 # Stack setup (size and address)
572 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
573 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
574 RUN_OUTPUT_VARIABLE stack_setup)
576 LIST(LENGTH stack_setup stack_setup_len)
577 if("${stack_setup_len}" STREQUAL "2")
578 LIST(GET stack_setup 0 makecontext_addr)
579 LIST(GET stack_setup 1 makecontext_size)
580 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
581 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
583 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
587 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
588 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
590 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
591 RUN_OUTPUT_VARIABLE stack
592 COPY_FILE test_stackgrowth)
594 if("${stack}" STREQUAL "down")
595 set(PTH_STACKGROWTH "-1")
596 elseif("${stack}" STREQUAL "up")
597 set(PTH_STACKGROWTH "1")
599 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
600 set(PTH_STACKGROWTH "-1")
601 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
602 set(PTH_STACKGROWTH "-1")
604 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
607 # If the test ran well, remove the test binary
608 file(REMOVE test_stackgrowth)
609 #--------------------------------------------------------------------------------------------------
611 ### check for addr2line
612 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
614 set(ADDR2LINE "${ADDR2LINE}/addr2line")
620 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
624 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
625 OUTPUT_VARIABLE remote
626 OUTPUT_STRIP_TRAILING_WHITESPACE)
627 #message(STATUS "Git remote: ${remote}")
628 execute_process(COMMAND git config --get remote.${remote}.url
629 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
631 OUTPUT_STRIP_TRAILING_WHITESPACE)
632 #message(STATUS "Git url: ${url}")
634 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
635 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
636 OUTPUT_VARIABLE GIT_VERSION
637 OUTPUT_STRIP_TRAILING_WHITESPACE)
638 message(STATUS "Git version: ${GIT_VERSION}")
640 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
641 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
642 OUTPUT_VARIABLE GIT_DATE
643 OUTPUT_STRIP_TRAILING_WHITESPACE)
644 message(STATUS "Git date: ${GIT_DATE}")
645 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
647 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
648 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
649 OUTPUT_VARIABLE SIMGRID_GITHASH
650 OUTPUT_STRIP_TRAILING_WHITESPACE)
652 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
653 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
656 ### Generate the required headers and scripts
657 #############################################
659 # gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default,
660 # but this too error prone. If you forget to include the config.h, you get weird segfaults.
661 # If you include it everywhere, everything gets recompiled everytime.
662 # So we include only where needed, and compile with -Wundef to notice the missing includes.
663 # But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H).
664 # So we have to make sure that everything got a decent value before generating the files.
665 foreach(var HAVE_BACKTRACE HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP HAVE_NANOSLEEP HAVE_POPEN
666 HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF
667 HAVE_UCONTEXT_H HAVE_UNISTD_H HAVE_VALGRIND_H HAVE_VASPRINTF HAVE_MREMAP HAVE_DLFUNC)
675 # Avoid triggering a (full) rebuild by touching the files if they did not really change
676 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
677 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
678 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
679 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
680 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
681 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
683 # We need two versions of the SMPI scripts because they contain the path to the library
684 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
686 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
688 ### SMPI script used when simgrid is installed
689 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
690 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
691 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
692 set(libdir ${exec_prefix}/lib)
693 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
695 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
697 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
699 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
700 foreach(script cc cxx ff f90 run)
701 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
704 ### SMPI scripts used when compiling simgrid
705 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
706 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
707 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
708 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
709 set(libdir "${CMAKE_BINARY_DIR}/lib")
710 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
712 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
714 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
716 foreach(script cc cxx ff f90 run)
717 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
721 foreach(script cc cxx ff f90 run)
722 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
723 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
727 set(generated_headers_to_install
728 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
729 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
732 set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
734 set(generated_files_to_clean
736 ${generated_headers_to_install}
737 ${CMAKE_BINARY_DIR}/bin/smpicc
738 ${CMAKE_BINARY_DIR}/bin/smpicxx
739 ${CMAKE_BINARY_DIR}/bin/smpiff
740 ${CMAKE_BINARY_DIR}/bin/smpif90
741 ${CMAKE_BINARY_DIR}/bin/smpirun
742 ${CMAKE_BINARY_DIR}/bin/colorize
743 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
744 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
747 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
748 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
749 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
750 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
751 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
752 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
753 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
754 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
755 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
756 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
757 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
758 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
759 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
768 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
772 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
777 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
778 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
779 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
780 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
781 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
782 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
783 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
784 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
785 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
786 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
787 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
788 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
789 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
790 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
791 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
792 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
793 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
794 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
795 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
796 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
798 set(generated_files_to_clean
799 ${generated_files_to_clean}
800 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
801 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
802 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
803 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
804 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
805 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
806 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
807 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
808 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
809 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
810 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
812 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
819 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
823 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
828 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
829 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
830 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
831 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
832 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
833 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
834 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
835 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
836 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
837 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
838 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
839 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
840 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
841 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
842 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
843 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
844 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
845 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
846 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
847 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
851 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
852 "${generated_files_to_clean}")
854 ### Define source packages for Libs
855 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
857 ### Build some Maintainer files
858 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
859 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
861 ### Setup gcc & clang flags
863 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
868 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
870 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
874 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
878 if(enable_memcheck_xml)
879 set(enable_memcheck true)
884 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
885 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
887 ### Define subdirectories
888 foreach(cmakefile ${CMAKEFILES_TXT})
889 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
890 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
893 ### Setup the distrib
894 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
896 ### Build the docs if asked to
897 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
899 ### Print the result of configuration
901 message("##########################################")
902 message("#### Content of src/internal_config.h ####")
903 message("##########################################")
904 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
905 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
906 foreach(line ${config_output})
909 message("##########################################")
910 message("#### Content of simgrid_config.h ####")
911 message("##########################################")
912 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
913 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
914 foreach(line ${config_output})
917 message("##########################################")
918 message("#### End of configuration headers ####")
919 message("##########################################")
921 message("\nConfiguration of package `simgrid':")
922 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
923 message(" Build Name ..................: ${BUILDNAME}")
924 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
925 message(" Site ........................: ${SITE}")
926 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
928 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
930 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
933 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
934 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
935 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
936 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
937 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
939 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
940 message(" version .............: ${Java_VERSION_STRING}")
942 message(" SWIG ................: Version ${SWIG_VERSION} found.")
944 message(" SWIG ................: Missing.")
947 if(CMAKE_Fortran_COMPILER)
948 message(" Compiler: Fortran ...........: ${SAVED_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
949 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
951 message(" Linker: .....................: ${CMAKE_LINKER}")
952 message(" version .............: ${LINKER_VERSION}")
953 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
955 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
956 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
957 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
958 message(" with LTO ....................: ${enable_lto}")
962 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
964 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
968 message(" Compile Java ................: yes")
969 message(" Native lib in jar .........: ${enable_lib_in_jar}")
971 message(" Compile Java ................: NO")
973 message(" Compile Lua .................: ${HAVE_LUA}")
974 message(" Compile Smpi ................: ${HAVE_SMPI}")
975 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
976 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
977 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
978 message(" PAPI support...............: ${HAVE_PAPI}")
979 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
981 message(" Maintainer mode .............: ${enable_maintainer_mode}")
982 message(" Documentation................: ${enable_documentation}")
983 message(" Model checking ..............: ${HAVE_MC}")
984 message(" Jedule mode ................: ${HAVE_JEDULE}")
985 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
986 message(" Mallocators .................: ${enable_mallocators}")
988 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
991 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
992 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
993 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")