Remove some old files for autotools.

git-svn-id: svn+ssh://scm.gforge.inria.fr/svn/simgrid/simgrid/trunk@8772 48e7efb5-ca39-0410-a469-dd3cf9ba447f

diff --git a/INSTALL b/INSTALL
deleted file mode 100644 (file)
index 7c5877f..0000000
--- a/INSTALL
+++ /dev/null
@@ -1,291 +0,0 @@
-************************************************
-* Installation information specific to SimGrid *
-************************************************
-
-The main source of information to compile SimGrid is the project FAQ.
-It is available online from http://simgrid.gforge.inria.fr/doc/faq.html or
-in the doc/ directory of this archive.
-
-Quick way to compile
-====================
-
-In short, the way to compile SimGrid depends on whether you are
-compiling a tar.gz archive or directly from the SVN. In the latter
-case, you have to do an extra step (noted 0 below).
-
-(0) regenerate the autotools files (only needed from SVN):
-$ ./bootstrap
-
-(1) configure SimGrid (both in SVN and archives)
-$ ./configure <all options>
-Main options are:
-  --prefix=<path>: specify where to install SimGrid
-  --with-pthreads: use pthreads instead of Unix contextes (less
-                   efficient but maybe easier to debug)
-  --enable-maintainer-mode: get the makefiles regenerated automatically
-  --disable-compiler-optimizations: compile with -O0 instead of -O3
-See below for other configure options which are common to any project,
-not only SimGrid related.
-
-(2) Compile it
-$ make
-
-(3) Test it (optional)
-$ make check 
-     or
-$ ./checkall
-
-(4) Install it
-$ make install
-
-
-Dependencies
-============
-SimGrid archives do not have any firm dependencies. 
-
-If you want to compile from the svn, you have to have autotool,
-automake and libtool installed.
-
-If you want to compile the java bindings, you have to have a java
-compiler, and the jni.h header file (available from the JDK)
-
-If you want to compile the GTNetS backend, you have to have a patched
-version of GTNetS installed. The patch lives in the contrib section of
-the SVN.
-
-Again, you should check the FAQ for more information.
-
-****************************************************************************
-* Generic Installation information from autotools                          *
-* (provided for completion at the step where you have to launch configure) *
-****************************************************************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
-
-   This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-<   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-

diff --git a/bootstrap b/bootstrap
deleted file mode 100755 (executable)
index 1e86b57..0000000
--- a/bootstrap
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/bin/sh
-# Run this to generate all the initial makefiles, etc.
-
-# Copyright (c) 2004-2007. The SimGrid team. All right reserved.
-
-# This file is part of the SimGrid project. This is free software:
-# You can redistribute and/or modify it under the terms of the
-# GNU LGPL (v2.1) licence.
-
-amversions="1.10 1.11"
-
-if [ ! -e bootstrap ] ; then
-  if [ -e ../bootstrap ] ; then
-    cd ..
-  fi
-fi
-
-check_version()
-{
-    eval $2 --version 2>/dev/null | grep -i "$1.*$3" >/dev/null
-}
-
-find_version()
-{
-    tool=$1
-    found="NOT_FOUND"
-    shift
-    versions="$*"
-
-    for version in $versions ; do
-       if check_version $tool ${tool}${variant} $version; then
-           found="${version}"
-           echo ${version} >&2
-           break
-       fi
-    done
-    if [ "x$found" = "xNOT_FOUND" ]; then
-       found="-" 
-    fi
-    echo $found
-}
-
-amver=`find_version automake ${amversions}`
-
-lt=`which libtoolize`
-if [ "x$lt" = "x" ] ; then
-  echo "Libtool not found. Please install the libtool package to proceed with a SVN checkout"
-  exit 1
-fi
-
-am=`which automake-$amver`
-if [ "x$am" = "x" ] ; then
-  echo "automake versions $amversions not found. Please install the relevant package to proceed with a SVN checkout"
-  exit 1
-fi
-
-ac=`which autoconf`
-if [ "x$ac" = "x" ] ; then
-  echo "autoconf not found. Please install the relevant package to proceed with a SVN checkout"
-  exit 1
-fi
-
-set -e
-# AUTOCONF=
-# AUTOHEADER=
-# AUTOPOINT=
-# LIBTOOLIZE=
-
-ACLOCAL="aclocal-$amver -I acmacro" \
-AUTOMAKE="automake-$amver" \
-  autoreconf -v -i -s || exit 1
-
-echo
-echo "And now, please launch ./configure"
-echo "----------------------------------"
-
-# What to do the day we declare optional modules using ACI:
-#  if test -e aci.conf ; then
-#   source aci.conf
-#   pass the content of $configure_args to configure
-
-echo 
-echo "Most common flags:"
-echo "  --enable-maintainer-mode         mandatory if you use the SVN version"
-echo "  --disable-compile-optimizations  useful if your gdb gets fooled"
-echo
-
-echo 
-echo "If you want to compile for several archs from the same (nfs-mounted?) tree, do:"
-echo "  mkdir your_arch; cd your_arch && ../configure --srcdir=.."
-
-echo 
-echo "(after configure, you'll naturally have to run \`make')"
-echo 
-echo 

diff --git a/buildtools/README b/buildtools/README
deleted file mode 100644 (file)
index 9bfdc8a..0000000
--- a/buildtools/README
+++ /dev/null
@@ -1,19 +0,0 @@
-The CMake configuration in this directory cannot be used to build SimGrid
-Instead, it can be used to auto-test it.
-
-To use it, you need a svn checkout under ~/simgrid-svn. Command to create it:
-   cd 
-   svn checkout svn://scm.gforge.inria.fr/svn/simgrid/simgrid/trunk simgrid-svn
-
-Then, you need to create a distribution archive, with this command:
-   ~/simgrid-svn/buildtools/scripts/make_dist.sh
-The archive will be copied into the ~/simgrid directory.
-
-
-Then, you can test the archive with autotools only using that command:
-   ~/simgrid-svn/buildtools/scripts/test_dist_with_autotools.sh   
-Alternatively, you can test the archive with cmake using that command:
-   ~/simgrid-svn/buildtools/scripts/test_dist_with_cmake.sh
-
-Please note that autotools are needed in any cases. Only the test
-mechanism changes between the two pathes so far.
\ No newline at end of file

diff --git a/checkall b/checkall
deleted file mode 100755 (executable)
index 8243eac..0000000
--- a/checkall
+++ /dev/null
@@ -1,112 +0,0 @@
-#! /usr/bin/perl
-
-use strict;
-$ENV{LC_ALL} = "C"; # avoid NLS nuisance
-
-my @fail;
-my @xfail;
-my @pass;
-my @xpass;
-my @skip;
-
-my $dir;
-
-open LOG,(">checkall.log") || die "Cannot open log file: $!";
-
-my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
-print LOG "Build started on $hour:$min:$sec $mon/$mday/$year\n";
-print LOG "Current svn version is: ".qx(svnversion)."\n\n";
-
-print LOG "\nXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n";
-print LOG "XXX Include config.log since it contains valuable information XXX\n";
-print LOG "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\n";
-open CFG,"<config.log" || die "Cannot open config.log: $!*";
-while (<CFG>) {
-    print LOG "$_";
-}
-close CFG;
-
-print LOG "\nXXXXXXXXXXXXXXXX\n";
-print LOG "XXX Run make XXX\n";
-print LOG "XXXXXXXXXXXXXXXX\n";
-open MAKE,("make 2>&1 |") || die "Cannot fork a make: $!";
-while (<MAKE>) {
-    print     $_;
-    print LOG $_;
-}
-if (!close MAKE) {
-    my $str = "# The source don't compile! Go fix it before running make check #";
-    my $dashes = $str;
-    $dashes =~ s/./#/g;
-    print LOG "\n$dashes\n$str\n$dashes\n\n";
-    print     "\n$dashes\n$str\n$dashes\n\n";
-    close LOG;
-    exit 1;
-}
-    
-print LOG "\nXXXXXXXXXXXXXXXXXXXXXX\n";
-print LOG "XXX Run make check XXX\n";
-print LOG "XXXXXXXXXXXXXXXXXXXXXX\n";
-open CHECK,("make -k check 2>&1 |") || die "Cannot fork a make check: $!";
-while (<CHECK>) {
-    print     $_;
-    print LOG $_;
-    chomp;
-    if (/Entering directory .([^']*)'/) { #})){
-      $dir = $1;
-      $dir =~ s|$ENV{PWD}/||;
-    }
-    push @pass, "$dir/$1"   if (/^PASS: (.*)$/);
-    push @xpass,"$dir/$1"   if (/^XPASS: (.*)$/);  
-    push @fail, "$dir/$1"   if (/^FAIL: (.*)$/);
-    push @xfail,"$dir/$1"   if (/^XFAIL: (.*)$/);   
-    push @skip, "$dir/$1"   if (/^SKIP: (.*)$/);
-}
-close CHECK;
-
-my $all = scalar @fail + scalar @xfail + scalar @pass + scalar @xpass + scalar @skip;
-my $banner;
-
-if (scalar @fail == 0) {
-    if (scalar @xfail == 0) {
-       $banner="All $all tests passed. Congratulation.";
-    } else {
-       $banner="All $all tests behaved as expected (".(scalar @xfail)." expected failures)";
-    }
-} elsif (scalar @xpass == 0) {
-    $banner=(scalar @fail)." of $all tests failed"; 
-} else {
-    $banner=(scalar @fail+scalar @xpass)." of $all tests did not behave as expected (".(scalar @xpass)." unexpected passes)"; 
-}
-$banner = "# $banner #";
-my $dashes = $banner;
-$dashes =~ s/./X/g;
-print LOG "\n$dashes\n$banner\n$dashes\n\n";
-print     "\n$dashes\n$banner (full logs in checkall.log)\n$dashes\n\n";
-
-if (scalar @pass) {
-    print LOG "* ".(scalar @pass)." passed tests:\n";
-    map {print LOG "  $_\n"} @pass;
-}
-if (scalar @skip) {
-    print LOG "* ".(scalar @skip)." skipped tests:\n";
-    print     "* ".(scalar @skip)." skipped tests:\n";
-    map {print "  $_\n";print LOG "  $_\n"} @skip;
-}
-if (scalar @xpass) {
-    print LOG "* ".(scalar @xpass)." unexpected pass:\n";
-    print     "* ".(scalar @xpass)." unexpected pass:\n";
-    map {print "  $_\n";print LOG "  $_\n"} @xpass;
-}
-if (scalar @xfail) {
-    print LOG "* ".(scalar @xfail)." expected failures:\n";
-    print     "* ".(scalar @xfail)." expected failures:\n";
-    map {print "  $_\n";print LOG "  $_\n"} @xfail;
-}
-if (scalar @fail) {
-    print LOG "* ".(scalar @fail)." failed tests:\n";
-    print     "* ".(scalar @fail)." failed tests:\n";
-    map {print "  $_\n";print LOG "  $_\n"} @fail;
-}
-
-exit scalar @fail == 0;

diff --git a/configure.ac b/configure.ac
deleted file mode 100644 (file)
index b512112..0000000
--- a/configure.ac
+++ /dev/null
@@ -1,724 +0,0 @@
-dnl Copyright (C) 2004-2007. The SimGrid team. All rights reserved.
-
-dnl This file is part of the SimGrid project. This is free software:
-dnl You can redistribute and/or modify it under the terms of the
-dnl GNU LGPL (v2.1) licence.
-
-######################
-## Setup the autotools
-##
-
-AC_PREREQ(2.59)
-AC_INIT([simgrid],[3.4.1],[simgrid-devel@lists.gforge.inria.fr])
-AC_CONFIG_SRCDIR([include/gras.h])
-AC_CONFIG_HEADERS([src/gras_config.h])
-# A CI_PREREQ(2003.01.16) # We need a recent ACI when having sub-modules
-
-AC_REVISION($Revision: 6998 $)
-AC_CANONICAL_TARGET
-AC_LANG([C])
-AC_PROG_CXX
-AM_PROG_GCJ
-
-dnl ########### Addition for mmalloc (to be integrated into Cmake tools)
-AC_FUNC_MMAP
-AC_CHECK_HEADERS(limits.h stddef.h unistd.h)
-
-BFD_NEED_DECLARATION(sbrk)
-BFD_NEED_DECLARATION(getpagesize)
-dnl ########### end of addition for mmalloc
-
-AM_INIT_AUTOMAKE([gnu -Wno-portability])
-AC_CONFIG_MACRO_DIR(acmacro) 
-ACLOCAL="$ACLOCAL -I acmacro"
-
-dnl Next few lines is a hack to prevent libtool checking for F77
-m4_undefine([AC_PROG_F77])
-m4_defun([AC_PROG_F77],[])
-
-dnl We do build a proper DLL when using win32
-AC_LIBTOOL_WIN32_DLL
-AC_PROG_LIBTOOL
-
-SIMGRID_DEP=""
-SMPI_DEP=""
-GRAS_DEP=""
-
-
-###############
-## SVN version check
-##
-if test -e .svn && echo $VERSION | grep -q svn; then
-  VERSION="$VERSION-r`svnversion`"
-  PACKAGE_VERSION="$PACKAGE_VERSION-r`svnversion`"
-  PACKAGE_STRING="$PACKAGE_STRING r`svnversion`"
-else if test -e .git && echo $VERSION | grep -q svn; then
-  ver=`git log --oneline -1 | sed 's| .*||'`
-  VERSION=`echo "$VERSION-r$ver" | sed 's/svn/git/'`
-  PACKAGE_VERSION=`echo "$PACKAGE_VERSION-r$ver" | sed 's/svn/git/'`
-  PACKAGE_STRING=`echo "$PACKAGE_STRING r$ver" | sed 's/svn/git/'`
-fi fi
-
-###############
-## System checks
-##
-SG_CONFIGURE_PART([System checks...])
-AC_PROG_CC(xlC gcc cc)
-AM_SANITY_CHECK
-AC_PROG_MAKE_SET
-AC_CHECK_PRINTF_NULL
-AC_CHECK_VA_COPY
-
-# Checks for header files.
-AC_HEADER_STDC
-AC_HEADER_TIME
-AC_CHECK_HEADERS([sys/socket.h \
-                  sys/stat.h \
-                 windows.h winsock.h winsock2.h \
-                 sys/time.h \
-                 errno.h unistd.h \
-                 execinfo.h\
-                 signal.h ])
-AC_CHECK_FUNCS([gettimeofday usleep \
-                getdtablesize \
-                sysconf\
-                readv\
-               popen\
-               signal])           
-  
-dnl GNU systems before POSIX2008 need the _GNU_SOURCE definition to find getline (and simgrid does pass this)             
-AC_MSG_CHECKING(a usable getline)
-AC_LINK_IFELSE([
-    #define _GNU_SOURCE
-    #include <stdio.h>
-    int main(void){
-      FILE * fp;
-      char * line = NULL;
-      size_t len = 0;
-      getline(&line, &len, fp);
-    }
-  ],[
-    AC_MSG_RESULT(found)
-  ],[
-    AC_SUBST(need_getline, ["#define SIMGRID_NEED_GETLINE 1 /* enable the getline replacement*/"])
-    AC_DEFINE(SIMGRID_NEED_GETLINE, 1, enable the getline replacement)
-    AC_MSG_RESULT(not found (activating internal implementation))
-  ])
-
-dnl AC_MSG_CHECKING(POSIX timer functions)
-AC_CHECK_LIB(rt, [clock_gettime], [
-    AC_DEFINE(HAVE_POSIX_GETTIME, 1, POSIX timer functions were found)
-    SIMGRID_DEP="$SIMGRID_DEP -lrt"
-    GRAS_DEP="$GRAS_DEP -lrt"
-  ])
-
-# check for a working snprintf (or use xbt/snprintf.c, which comes from http://www.ijs.si/software/snprintf/)
-AC_FUNC_SNPRINTF
-# check for asprintf function familly (or request the replacements from xbt/snprintf.c)
-AC_CHECK_FUNC(  asprintf, :,[
-    AC_DEFINE(NEED_ASPRINTF,  1,  enable the asprintf replacement)
-    AC_SUBST(need_asprintf, ["#define SIMGRID_NEED_ASPRINTF 1 /* enable the asprintf replacement */"]) 
-   ])
-AC_CHECK_FUNC( vasprintf, :,[
-    AC_DEFINE(NEED_VASPRINTF, 1,  enable the vasprintf replacement)
-    AC_SUBST(need_vasprintf, ["#define SIMGRID_NEED_VASPRINTF 1 /*enable the vasprintf replacement */"]) 
-   ])
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-AC_C_INLINE
-AC_TYPE_SIZE_T
-
-###################################
-## SimGrid and GRAS specific checks
-##
-
-SG_CONFIGURE_PART(Checking GRAS architecture signature...)
-# Check architecture signature begin
-GRAS_ARCH
-# Check architecture signature end
-GRAS_CHECK_STRUCT_COMPACTION
-
-
-dnl ##
-dnl ##  CONTEXT IMPLEMENTATION
-dnl ##
-
-SG_CONFIGURE_PART([Checking threads, contexts or assimilated...])
-
-dnl #
-dnl #  1. determine possibilities
-dnl #
-
-dnl #  check for MCSC method (ucontexts)
-AC_CHECK_MCSC(mcsc=yes, mcsc=no) 
-
-dnl #  check for pthread method
-AC_CHECK_HEADERS([pthread.h])
-AC_CHECK_LIB(pthread,pthread_create,pthread=yes, pthread=no)
-
-if test x$pthread = xyes ; then
-  AC_CHECK_LIB(pthread, sem_init, HAVE_SEM_INIT=yes, HAVE_SEM_INIT=no)
-  if test ${HAVE_SEM_INIT} = yes ; then
-     AC_MSG_CHECKING(if sem_init is compilable)
-     AC_TRY_COMPILE([#include <semaphore.h>],
-                   [sem_t s; sem_init(&s);], HAVE_SEM_INIT=yes, HAVE_SEM_INIT=no)
-     if test ${HAVE_SEM_INIT} = yes ; then
-        AC_DEFINE([HAVE_SEM_INIT],1,[Define if sem_init() is avaible or not (part of XPG6 standard only)])
-        AC_MSG_RESULT(yes)
-     else
-       AC_MSG_RESULT(no)
-     fi
-  fi
-  AC_CHECK_LIB(pthread, sem_timedwait, HAVE_SEM_TIMEDWAIT=yes, HAVE_SEM_TIMEDWAIT=no)
-  if test ${HAVE_SEM_TIMEDWAIT} = yes ; then
-     AC_MSG_CHECKING(if sem_timedwait is compilable)
-     AC_TRY_COMPILE([#include <semaphore.h>],
-                   [sem_t *s; const struct timespec * t; sem_timedwait(s, t);], HAVE_SEM_TIMEDWAIT=yes, HAVE_SEM_TIMEDWAIT=no)
-     if test ${HAVE_SEM_TIMEDWAIT} = yes ; then
-        AC_DEFINE([HAVE_SEM_TIMEDWAIT],1,[Define if sem_timedwait() is avaible or not (part of XPG6 standard only)])
-        AC_MSG_RESULT(yes)
-     else
-       AC_MSG_RESULT(no)
-     fi
-  fi
-
-  AC_CHECK_LIB(pthread, pthread_mutex_timedlock, HAVE_MUTEX_TIMEDLOCK=yes, HAVE_MUTEX_TIMEDLOCK=no)
-  if test ${HAVE_MUTEX_TIMEDLOCK} = yes ; then
-     AC_MSG_CHECKING(if pthread_mutex_timedlock is compilable)
-     AC_TRY_COMPILE([#include <pthread.h>],
-                   [pthread_mutex_t s; const struct timespec t; sem_timedlock(&s, &t);], HAVE_MUTEX_TIMEDLOCK=yes, HAVE_MUTEX_TIMEDLOCK=no)
-     if test ${HAVE_MUTEX_TIMEDLOCK} = yes ; then
-        AC_DEFINE([HAVE_MUTEX_TIMEDLOCK],1,[Define if pthread_mutex_timedlock() is avaible or not (part of XPG6 standard only?)])
-        AC_MSG_RESULT(yes)
-     else
-       AC_MSG_RESULT(no)
-     fi
-  fi
-fi
-
-dnl #
-dnl #  2. make a general decision
-dnl #
-
-if test ".$mcsc" = .yes; then
-   # ucontext found
-   mcsc=yes
-elif test ".$pthread" = .yes; then
-   # ucontext not found, but pthread found
-   pthread=yes
-else
-    ac_header=windows.h
-    as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-    if test `eval echo '${'$as_ac_Header'}'` = yes; then
-      windows_context=yes
-    else
-      AC_ERROR([no appropriate backend found])
-    fi
-fi
-AM_CONDITIONAL(IS_WINDOWS,test x$windows_context = xyes)
-
-
-dnl #
-dnl #  3. allow decision to be overridden by user
-dnl #
-
-AC_MSG_CHECKING(what kind of backend should we use)
-
-AC_ARG_WITH(pthread, [  --with-pthread   Use pthread instead of ucontext.],with_context=pthread)
-AC_ARG_WITH(pthread, [  --with-pthreads   Use pthread instead of ucontext.],with_context=pthread)
-
-AC_ARG_WITH(context,
-  [  --with-context=[ucontext/pthread]   Use either (System V) swapcontext or pthread [[default=auto]].],,
-  with_context=auto)
-
-if test "x$with_context$mcsc" = "xucontextno" ; then 
-  AC_MSG_ERROR([--with-context=ucontext specified but ucontext unusable. Relaunch configure without this argument.], 77)
-fi
-
-case $with_context in
- ucontext) ;;
- pthread) ;;
- pthreads) ;;
- windows) ;;
- auto) with_context=ucontext;;
- *) AC_MSG_ERROR([--with-context must be either ucontext or pthread]) ;;
-esac
-
-if test "x$with_context" = "xucontext" ; then
-  if test ".$mcsc" = .yes; then
-    AC_MSG_RESULT(found working ucontext. Great!)
-    AC_DEFINE([CONTEXT_UCONTEXT],1,[Define if xbt contexts are based on ucontext or not])
-    AC_CHECK_HEADERS([valgrind/valgrind.h])
-  else
-    if test ".$windows_context" = .yes ; then
-      AC_MSG_RESULT(use windows context portability layer.)
-      with_context=windows
-    else
-      AC_MSG_RESULT([[no working ucontext found. Try pthreads as a fallback]])
-      with_context=pthread
-    fi
-  fi
-fi
-
-if test "x$with_context" = "xpthread"; then
-  if test x$pthread != xyes ; then # reuse previous checks
-    AC_MSG_ERROR([[Cannot find pthreads (try --with-context=ucontext if you haven't already tried).]])
-  fi
-  AC_DEFINE([CONTEXT_THREADS],1,[Define if xbt contexts are based on our threads implementation or not])
-  AC_MSG_RESULT(You have pthreads and requested for them. Fine.)
-fi
-AM_CONDITIONAL(CONTEXT_THREADS,test "x$with_context" != xucontext)
-
-dnl #
-dnl #  4. determine a few additional details
-dnl #
-
-if test "x$with_context" = "xucontext" ; then
-dnl #  direction of stack grow
-  AC_CHECK_STACKGROWTH(PTH_STACKGROWTH)
-  if test ".$ac_cv_check_stackgrowth" = ".down"; then
-      PTH_STACK_GROWTH="down"
-  else
-      PTH_STACK_GROWTH="up"
-  fi
-  AC_SUBST(PTH_STACK_GROWTH)
-  
-  AC_CHECK_STACKSETUP(makecontext, pth_skaddr_makecontext, pth_sksize_makecontext)
-fi
-
-#########################################
-## Check for libraries extra-dependencies
-##
-
-SG_CONFIGURE_PART(Checking extra libraries dependencies...)
-
-if test xpthread=xyes ; then 
-  # if the pthreads are usable
-  if test "x$with_context" = "xpthread" ; then
-    # if we use them to implement the xbt_context
-    SIMGRID_DEP="$SIMGRID_DEP -lpthread"
-  fi
-  # we need them in any case for the gras lib (which is multithreaded), but on windows (of course)
-  if test "x$with_context" != "xwindows" ; then
-    GRAS_DEP="$GRAS_DEP -lpthread"
-  fi
-fi
-AC_SEARCH_LIBS([connect],[socket],[],[],[]) # need -lsocket on solaris
-
-#########################################
-## Build optional modules (gtnets)
-##
-gtnets=no
-AC_ARG_WITH(gtnets,
-  AS_HELP_STRING([--with-gtnets], [Path to GTNetS installation (default to empty, ie not using GTNetS)]),
-  gtnets_path="$withval",gtnets_path="no")
-if test "x$gtnets_path" = "xno" ; then
-  AC_MSG_RESULT(Eventually you will come to GTNetS.)
-else  
-  AC_MSG_RESULT(***** You have decided to use the experimental GTNetS. We hope you know what you're doing.. *****)
-  AC_MSG_CHECKING(for gtnets)
-  AC_LANG_PUSH([C++])  
-  GTNETS_LDFLAGS="-lgtnets -L$gtnets_path/lib"
-  GTNETS_CPPFLAGS="-I$gtnets_path/include -I$gtnets_path/include/gtnets"
-  LDFLAGS_SAV=$LDFLAGS 
-  CPPFLAGS_SAV=$CPPFLAGS
-  CPPFLAGS+=$GTNETS_CPPFLAGS
-  LDFLAGS+=$GTNETS_LDFLAGS
-  AC_TRY_LINK([ #include <simulator.h>
-              ], [Simulator s; s.RunUntilNextCompletion();], gtnets=yes, gtnets=no)
-  CPPFLAGS=$CPPFLAGS_SAV
-  LDFLAGS=$LDFLAGS_SAV
-  AC_LANG_POP([C++])  
-fi
-
-if test "x$gtnets" = "xyes" ; then
-  AC_MSG_RESULT(Enabling GTNETS support.)
-  AC_DEFINE([HAVE_GTNETS], 1, [Indicates that we have GTNETS support])
-  LDFLAGS+="-lgtnets -L$gtnets_path/lib"
-  CPPFLAGS+="-I$gtnets_path/include -I$gtnets_path/include/gtnets"
-fi
-AM_CONDITIONAL(HAVE_GTNETS, test "x$gtnets" != "xno")
-
-
-
-AC_SUBST([SIMGRID_DEP])
-AC_SUBST([SMPI_DEP])
-
-AC_CHECK_LIB(nsl, gethostbyname, [GRAS_DEP="$GRAS_DEP -lnsl"])
-AC_CHECK_LIB(socket, connect,    [GRAS_DEP="$GRAS_DEP -lsocket"])
-
-AC_MSG_CHECKING(for extra dependencies of libgras)
-case $host_os in
-  *mingw* ) GRAS_DEP="$GRAS_DEP -lws2_32" ; SIMGRID_DEP="$SIMGRID_DEP -lws2_32";
-            AM_CPPFLAGS="$AM_CPPFLAGS -DDLL_EXPORT"
-            AC_DEFINE(CONTEXT_THREADS,1);;
-esac
-
-
-
-if test "x$GRAS_DEP" = x; then 
-   AC_MSG_RESULT(none)
-else
-   AC_MSG_RESULT($GRAS_DEP)
-fi
-AC_SUBST([GRAS_DEP])
-
-##############################################
-## Enhance maintainer mode and SUBST variables
-## (must be placed after any compilation tests since our overprotective flags
-##  let some tests fail)
-
-# Check whether we are doing a regular build or a GRAMINE (minimal) one
-# Next line is modified by sed when building gramine source tree
-gramine_mode=no
-if test x$gramine_mode = xyes
-then
-  USE_MAINTAINER_MODE=no
-fi
-AM_CONDITIONAL(GRAMINE_MODE,test x$gramine_mode != xno)
-
-AM_MAINTAINER_MODE
-if test x$USE_MAINTAINER_MODE = xyes 
-then
-   # Maintainers have no choice ! I'm a BOFH, and I plainly assume. [Mt]
-   force_compile_warnings=yes   
-fi
-SG_COMPILE_FLAGS
-
-##
-## Support for tracing instrumentation (no longer supported in autotools)
-##
-
-##
-## Support for the supernovae compilation mode
-##
-AC_ARG_ENABLE(supernovae,
-              AS_HELP_STRING([--enable-supernovae],[Put the whole library in one compilation unit only to help gcc optimizing the code]),
-             [supernovae=$enableval],
-             [supernovae=no])
-AM_CONDITIONAL(SUPERNOVAE_MODE, test x$supernovae != xno)
-
-AC_SUBST([CFLAGS])
-AC_SUBST([CPPFLAGS])
-AC_SUBST([LDFLAGS])
-AC_SUBST([AM_CPPFLAGS])
-AC_SUBST([abs_builddir])
-AC_SUBST([abs_srcdir])
-AC_SUBST([abs_top_builddir])
-AC_SUBST([abs_top_srcdir])
-
-##############################################
-## Specific mode for build daemons.
-## (they compile the SVN without having the autotools installed)
-AC_ARG_ENABLE(botbuild,
-             AS_HELP_STRING([--enable-botbuild], [Compilation mode for build daemons -- do not use it]),
-              botbuild=$enableval,botbuild=no)
-AM_CONDITIONAL(BOTBUILD_MODE,test x$botbuild != xno)
-
-if test -e .svn && test x$USE_MAINTAINER_MODE != xyes && test x$botbuild != xyes ; then
-  echo "ERROR: "
-  echo "ERROR: You have to enable the maintainer mode to compile the SVN."
-  echo "ERROR: For this, just call configure this way:"
-  echo "ERROR:"
-  echo "ERROR: ./configure '--enable-maintainer-mode' $ac_configure_args"
-  echo "ERROR:"
-  exit 1
-fi
-
-
-SG_CONFIGURE_PART(Checking Java bindings...)
-# Java cruft
-AC_ARG_ENABLE(java,
-             AS_HELP_STRING([--disable-java], [To not compile the Java bindings even if the tools are found]),
-             disable_java=$enableval,disable_java=yes)
-if test "x$disable_java" != "xyes" ; then
-   use_java="disabled by user"
-else
-  AC_PATH_PROG([JAVAC], [javac], `which javac`)
-  AC_PATH_PROG([JAVA],  [java] , `which java`)
-  AC_PATH_PROG([JAR],   [jar]  , `which jar`)
-  AC_CHECK_HEADERS(jni.h)
-  if test -n "$JAVAC" && test -n "$JAVA" && test -n "$JAR" && test "x$ac_cv_header_jni_h" = "xyes" ; then
-     use_java="yes"
-     AC_DEFINE(HAVE_JAVA,1, [defines whether Java bindings must be compiled or not])
-  else   
-     use_java="no (you may want to install the java-gcj-compat-dev package)"
-  fi
-fi
-AC_MSG_RESULT(decide whether to compile java bindings... $use_java)
-AM_CONDITIONAL(HAVE_JAVA,test "x$use_java" = "xyes")
-
-
-SG_CONFIGURE_PART(Checking Lua bindings...)
-AC_ARG_ENABLE(lua,
-             AS_HELP_STRING([--disable-lua], [To not compile the Lua bindings even if the tools are found]),
-             disable_lua=$enableval,disable_lua=yes)
-if test "x$disable_lua" != "xyes" ; then
-   use_lua="disabled by user"
-else
-  AC_CHECK_HEADERS(lualib.h)
-  if test "x$ac_cv_header_lualib_h" = "xyes" ; then
-     use_lua="yes"
-     AC_DEFINE(HAVE_LUA,1, [defines whether Lua bindings must be compiled or not])
-     SIMGRID_DEP="${SIMGRID_DEP} -ldl -llua5.1"
-  else   
-     use_lua="no (you may want to install the liblua5.1-0-dev package, or pass CFLAGS=-I/usr/include/lua5.1)"
-  fi
-fi
-AC_MSG_RESULT(decide whether to compile lua bindings... $use_lua)
-AM_CONDITIONAL(HAVE_LUA,test "x$use_lua" = "xyes")
-
-SG_CONFIGURE_PART(Checking Ruby bindings...)
-# Ruby cruft
-AC_ARG_ENABLE(ruby,
-             AS_HELP_STRING([--disable-ruby], [To not compile the Ruby bindings even if the tools are found]),
-             disable_ruby=$enableval,disable_ruby=yes)
-if test "x$disable_ruby" != "xyes" ; then
-   use_ruby="disabled by user"
-else
-  CPPFLAGS="-I/usr/lib/ruby/1.8/i486-linux/ $CPPFLAGS"
-  AC_MSG_CHECKING(checking ruby.h usability and presence)
-  AC_COMPILE_IFELSE([
-    #undef PACKAGE_NAME
-    #undef PACKAGE_TARNAME
-    #undef PACKAGE_VERSION
-    #undef PACKAGE_STRING
-    #undef PACKAGE_BUGREPORT
-    #include <ruby.h>
-  ], use_ruby=yes,use_ruby="no (Package ruby1.8-dev missing)")
-  AC_MSG_RESULT($use_ruby)
-  if test "x$use_ruby" = "xyes" ; then
-     AC_DEFINE(HAVE_RUBY,1, [defines whether Ruby bindings must be compiled or not])
-     SIMGRID_DEP="${SIMGRID_DEP} -lruby1.8"
-  else
-     AC_MSG_RESULT(Please install the ruby1.8-dev package (on debian and similar) to get ruby bindings)
-  fi
-fi
-AC_MSG_RESULT(decide whether to compile ruby bindings... $use_ruby)
-AM_CONDITIONAL(HAVE_RUBY,test "x$use_ruby" = "xyes")
-
-
-#####################
-## Check for programs
-##
-
-SG_CONFIGURE_PART(Checking programs...)
-AC_CHECK_PROG(BASH, bash, `which bash`, /bin/sh)
-WARNING="This file is generated, do not edit"
-AC_SUBST(WARNING)
-
-
-# Can we rebuild the parsers?
-# We really want flex and refuse other lex. So, the parser is portable and
-# does not induce extra lib dependency
-AC_PROG_FLEX(2.5.30)
-               
-# Can we rebuild the xml-lexers from the XML specification?
-# if not, simply touch the flex source files (which are distributed in
-#  tarballs even if generated by flexml) and hope for the best.
-AC_CHECK_PROG(FLEXML,flexml,`which flexml`,NOTFOUND)
-AM_CONDITIONAL(HAVE_FLEXML,test x$FLEXML != xNOTFOUND)
-
-# Check for doxygen when in maintainer mode which is helpful to build doc & dist
-AC_PATH_PROG(DOXYGEN,doxygen,`which doxygen`)
-AC_PATH_PROG(FIG2DEV,fig2dev,`which fig2dev`)
-AM_CONDITIONAL(HAVE_DOXYGEN,test x$DOXYGEN != x &&
-                            test x$FIG2DEV != x)
-
-# Can we rebuild the publication list from the bib file?
-AC_CHECK_PROG(BIBTEX,bibtex,`which flexml`,NOTFOUND)
-AC_CHECK_PROG(BIBTOOL,bibtool,`which bibtool`,NOTFOUND)
-AC_CHECK_PROG(ICONV,iconv,`which iconv`,NOTFOUND)
-AC_CHECK_PROG(BIBTEX2HTML,bibtex2html,`which bibtex2html`,NOTFOUND)
-
-BIBTEX2HTML_VER="date"
-if test "x$BIBTEX2HTML" != "xNOTFOUND" ; then
-   BIBTEX2HTML_VER=`$BIBTEX2HTML --help 2>&1 | grep date`
-fi;
-
-AC_MSG_CHECKING(whether you have the right bibtex2html and will be able to build HTML files from the bibtex file)
-AM_CONDITIONAL(HAVE_BIBTEX2HTML,test "x$BIBTEX2HTML_VER" == "x"     &&
-                               test "x$BIBTEX2HTML" != "xNOTFOUND" &&
-                               test "x$BIBTOOL" != "xNOTFOUND"     &&
-                               test "x$ICONV" != "xNOTFOUND"         )
-
-if test "x$BIBTEX2HTML_VER" == "x"     &&
-                               test "x$BIBTEX2HTML" != "xNOTFOUND" &&
-                               test "x$BIBTOOL" != "xNOTFOUND"     &&
-                               test "x$ICONV" != "xNOTFOUND"; then
-   AC_MSG_RESULT(yes)
-else
-   AC_MSG_RESULT(no)
-fi
-
-# Can we extract really usable backtraces? (also need the popen function)
-AC_PATH_PROG(ADDR2LINE, addr2line)
-if test x$ADDR2LINE != x ; then
-  AC_DEFINE_UNQUOTED(ADDR2LINE,"$ADDR2LINE",[Path to the addr2line tool])
-fi
-
-AC_SUBST(ac_configure_args)
-AC_DEFINE_UNQUOTED(AC_CONFIGURE_ARGS,"$ac_configure_args",[Arguments passed to the configure script])
-# Can we make status line about the compilation result?
-dnl A C_CHECK_PROG(MD5SUM,md5sum,`which md5sum`)
-build_id="$PACKAGE ver=$VERSION args=\"$ac_configure_args\""
-AC_SUBST(build_id)
-
-###################
-## Makes the output
-##
-
-
-#
-#      examples/gras/chord/Makefile  examples/gras/chord/test_sg examples/gras/chord/test_rl
-#  src/amok/Makefile
-
-SG_CONFIGURE_PART(Generating files...)
-
-# Core of the libraries
-
-AC_CONFIG_FILES([
-  Makefile
-  include/Makefile
-  include/simgrid_config.h
-  src/Makefile
-  src/context_sysv_config.h
-])
-
-# Tools being embeeded in gramine (stub generator)
-AC_CONFIG_FILES([
-  tools/Makefile
-    tools/gras/Makefile
-    tools/tesh/Makefile
-])
-#    tools/tesh2/Makefile
-
-
-# GRAMINE_CUT_BEGIN
-
-# Tools NOT being embeeded in gramine
-AC_CONFIG_FILES([
-  tools/graspe-slave
-],[
-    for file in                                                 \
-     tools/graspe-slave           tools/graspe-master           \
-     checkall                     examples/java/runtest         \
-     src/mk_supernovae.sh                                       \
-    ; do                                                        \
-      test -e $file && chmod +x $file;                          \
-    done
-])
-
-# build tools && Testsuite
-
-AC_CONFIG_FILES([  
-  buildtools/Makefile
-  testsuite/Makefile
-  testsuite/run_tests    
-],[
-    for file in                                                 \
-     testsuite/run_tests                                        \
-    ; do                                                        \
-      test -e $file && chmod +x $file;                          \
-    done
-])
-
-# Teshsuite (testsuite using tesh)
-AC_CONFIG_FILES([  
-  teshsuite/Makefile
-])
-
-# Documentation
-AC_CONFIG_FILES([
-  doc/Makefile
-  doc/Doxyfile
-])
-
-# Examples
-
-#      examples/gras/p2p/Makefile
-#      examples/gras/p2p/chord/Makefile
-#      examples/gras/p2p/can/Makefile
-
-AC_CONFIG_FILES([
-    examples/java/Makefile
-      examples/java/basic/Makefile
-      examples/java/comm_time/Makefile
-      examples/java/suspend/Makefile
-      examples/java/ping_pong/Makefile
-])
-
-AC_CONFIG_FILES([
-  examples/Makefile 
-    examples/msg/Makefile
-    examples/simdag/Makefile
-    examples/gras/Makefile
-      examples/gras/ping/Makefile   
-      examples/gras/rpc/Makefile
-      examples/gras/spawn/Makefile
-      examples/gras/synchro/Makefile
-      examples/gras/timer/Makefile
-      examples/gras/properties/Makefile
-      examples/gras/chrono/Makefile
-      examples/gras/mutual_exclusion/simple_token/Makefile
-      examples/gras/mmrpc/Makefile
-      examples/gras/pmm/Makefile
-      examples/gras/all2all/Makefile
-    examples/amok/Makefile       
-    examples/smpi/Makefile       
-])
-#      examples/gras/replay/Makefile
-
-AC_CONFIG_FILES([
-  src/smpi/smpicc
-  src/smpi/smpirun
-],[
-    for file in                                                 \
-      src/smpi/smpicc                                           \
-      src/smpi/smpirun                                          \
-    ; do                                                        \
-      test -e $file && chmod +x $file;                          \
-    done
-])
-
-# GRAMINE_CUT_END
-
-AC_OUTPUT
-
-echo "
-
-Configuration of package \`${PACKAGE}' (version ${VERSION}) on $gras_arch_name (=$gras_arch):
-
-       Compiler:        ${CC} (version: ${GCC_VERSION})
-       
-       CFlags:          ${CFLAGS}
-       CPPFlags:        ${CPPFLAGS}
-       LDFlags:         ${LDFLAGS}
-
-       Context backend: ${with_context}
-       Compile Java:    ${use_java}
-       Compile Lua:     ${use_lua}
-       Compile Ruby:    ${use_ruby}
-       
-       Maintainer mode: ${USE_MAINTAINER_MODE}
-       Supernovae mode: ${supernovae}
-
-"
-if test x$botbuild = xyes ; then
-  echo "        This is a bot build. Do not specify --enable-botbuild if you are not a bot."
-  echo
-fi
-
-if test -e .svn && test x$USE_MAINTAINER_MODE != xyes && test x$botbuild = xyes ; then
-  echo "WARNING: "
-  echo "WARNING: You are compiling the SVN in botbuild mode. If you are not a daemon, don't do so. "
-  echo "WARNING: Remove the --enable-botbuild from your configure line, and add --enable-maintainer-mode instead."
-  echo "WARNING:"
-  echo "WARNING: You won't be able to build archives until then (make dist is likely to fail). "
-  echo "WARNING:"
-fi
-
-echo $build_id > stamp.configure
-
-exit 0;

diff --git a/depcomp b/depcomp
deleted file mode 100755 (executable)
index ca5ea4e..0000000
--- a/depcomp
+++ /dev/null
@@ -1,584 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2006-10-15.18
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
-# Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  if test "$libtool" = yes; then
-    "$@" -Wc,-M
-  else
-    "$@" -M
-  fi
-  stat=$?
-
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-
-  if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
-    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[   ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no
-  for arg in "$@"; do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  "$@" || exit $?
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-       set fnord "$@"
-       shift
-       shift
-       ;;
-    *)
-       set fnord "$@" "$arg"
-       shift
-       shift
-       ;;
-    esac
-  done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::   \1 \\:p' >> "$depfile"
-  echo "       " >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:

diff --git a/missing b/missing
deleted file mode 100755 (executable)
index 1c8ff70..0000000
--- a/missing
+++ /dev/null
@@ -1,367 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2006-05-10.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case $1 in
-  lex|yacc)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $1 in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-                                      sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-          sed 's/\.am$/.in/' |
-          while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-       touch $file
-    else
-       test -z "$file" || exec >$file
-       echo "#! /bin/sh"
-       echo "# Created by GNU Automake missing as a replacement of"
-       echo "#  $ $@"
-       echo "exit 0"
-       chmod +x $file
-       exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-       case $LASTARG in
-       *.y)
-           SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-           if test -f "$SRCFILE"; then
-                cp "$SRCFILE" y.tab.c
-           fi
-           SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-           if test -f "$SRCFILE"; then
-                cp "$SRCFILE" y.tab.h
-           fi
-         ;;
-       esac
-    fi
-    if test ! -f y.tab.h; then
-       echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-       echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-       case $LASTARG in
-       *.l)
-           SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-           if test -f "$SRCFILE"; then
-                cp "$SRCFILE" lex.yy.c
-           fi
-         ;;
-       esac
-    fi
-    if test ! -f lex.yy.c; then
-       echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-        you modified a dependency of a manual page.  You may need the
-        \`Help2man' package in order for those modifications to take
-        effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-       touch $file
-    else
-       test -z "$file" || exec >$file
-       echo ".ab help2man is required to generate this page"
-       exit 1
-    fi
-    ;;
-
-  makeinfo)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-       /^@setfilename/{
-         s/.* \([^ ]*\) *$/\1/
-         p
-         q
-       }' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-       case $firstarg in
-       *o*)
-           firstarg=`echo "$firstarg" | sed s/o//`
-           tar "$firstarg" "$@" && exit 0
-           ;;
-       esac
-       case $firstarg in
-       *h*)
-           firstarg=`echo "$firstarg" | sed s/h//`
-           tar "$firstarg" "$@" && exit 0
-           ;;
-       esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End: