find_package(PythonLibsNew ${PYBIND11_PYTHON_VERSION} REQUIRED)
else()
- find_package(pybind11 2.2.0)
+ find_package(pybind11 CONFIG)
endif()
if(NOT PYTHONLIBS_FOUND)
--- /dev/null
+# - Find python libraries
+# This module finds the libraries corresponding to the Python interpreter
+# FindPythonInterp provides.
+# This code sets the following variables:
+#
+# PYTHONLIBS_FOUND - have the Python libs been found
+# PYTHON_PREFIX - path to the Python installation
+# PYTHON_LIBRARIES - path to the python library
+# PYTHON_INCLUDE_DIRS - path to where Python.h is found
+# PYTHON_MODULE_EXTENSION - lib extension, e.g. '.so' or '.pyd'
+# PYTHON_MODULE_PREFIX - lib name prefix: usually an empty string
+# PYTHON_SITE_PACKAGES - path to installation site-packages
+# PYTHON_IS_DEBUG - whether the Python interpreter is a debug build
+#
+# Thanks to talljimbo for the patch adding the 'LDVERSION' config
+# variable usage.
+
+#=============================================================================
+# Copyright 2001-2009 Kitware, Inc.
+# Copyright 2012 Continuum Analytics, Inc.
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+#
+# * Neither the names of Kitware, Inc., the Insight Software Consortium,
+# nor the names of their contributors may be used to endorse or promote
+# products derived from this software without specific prior written
+# permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#=============================================================================
+
+# Checking for the extension makes sure that `LibsNew` was found and not just `Libs`.
+if(PYTHONLIBS_FOUND AND PYTHON_MODULE_EXTENSION)
+ return()
+endif()
+
+# Use the Python interpreter to find the libs.
+if(PythonLibsNew_FIND_REQUIRED)
+ find_package(PythonInterp ${PythonLibsNew_FIND_VERSION} REQUIRED)
+else()
+ find_package(PythonInterp ${PythonLibsNew_FIND_VERSION})
+endif()
+
+if(NOT PYTHONINTERP_FOUND)
+ set(PYTHONLIBS_FOUND FALSE)
+ return()
+endif()
+
+# According to http://stackoverflow.com/questions/646518/python-how-to-detect-debug-interpreter
+# testing whether sys has the gettotalrefcount function is a reliable, cross-platform
+# way to detect a CPython debug interpreter.
+#
+# The library suffix is from the config var LDVERSION sometimes, otherwise
+# VERSION. VERSION will typically be like "2.7" on unix, and "27" on windows.
+execute_process(COMMAND "${PYTHON_EXECUTABLE}" "-c"
+ "from distutils import sysconfig as s;import sys;import struct;
+print('.'.join(str(v) for v in sys.version_info));
+print(sys.prefix);
+print(s.get_python_inc(plat_specific=True));
+print(s.get_python_lib(plat_specific=True));
+print(s.get_config_var('SO'));
+print(hasattr(sys, 'gettotalrefcount')+0);
+print(struct.calcsize('@P'));
+print(s.get_config_var('LDVERSION') or s.get_config_var('VERSION'));
+print(s.get_config_var('LIBDIR') or '');
+print(s.get_config_var('MULTIARCH') or '');
+"
+ RESULT_VARIABLE _PYTHON_SUCCESS
+ OUTPUT_VARIABLE _PYTHON_VALUES
+ ERROR_VARIABLE _PYTHON_ERROR_VALUE)
+
+if(NOT _PYTHON_SUCCESS MATCHES 0)
+ if(PythonLibsNew_FIND_REQUIRED)
+ message(FATAL_ERROR
+ "Python config failure:\n${_PYTHON_ERROR_VALUE}")
+ endif()
+ set(PYTHONLIBS_FOUND FALSE)
+ return()
+endif()
+
+# Convert the process output into a list
+string(REGEX REPLACE ";" "\\\\;" _PYTHON_VALUES ${_PYTHON_VALUES})
+string(REGEX REPLACE "\n" ";" _PYTHON_VALUES ${_PYTHON_VALUES})
+list(GET _PYTHON_VALUES 0 _PYTHON_VERSION_LIST)
+list(GET _PYTHON_VALUES 1 PYTHON_PREFIX)
+list(GET _PYTHON_VALUES 2 PYTHON_INCLUDE_DIR)
+list(GET _PYTHON_VALUES 3 PYTHON_SITE_PACKAGES)
+list(GET _PYTHON_VALUES 4 PYTHON_MODULE_EXTENSION)
+list(GET _PYTHON_VALUES 5 PYTHON_IS_DEBUG)
+list(GET _PYTHON_VALUES 6 PYTHON_SIZEOF_VOID_P)
+list(GET _PYTHON_VALUES 7 PYTHON_LIBRARY_SUFFIX)
+list(GET _PYTHON_VALUES 8 PYTHON_LIBDIR)
+list(GET _PYTHON_VALUES 9 PYTHON_MULTIARCH)
+
+# Make sure the Python has the same pointer-size as the chosen compiler
+# Skip if CMAKE_SIZEOF_VOID_P is not defined
+if(CMAKE_SIZEOF_VOID_P AND (NOT "${PYTHON_SIZEOF_VOID_P}" STREQUAL "${CMAKE_SIZEOF_VOID_P}"))
+ if(PythonLibsNew_FIND_REQUIRED)
+ math(EXPR _PYTHON_BITS "${PYTHON_SIZEOF_VOID_P} * 8")
+ math(EXPR _CMAKE_BITS "${CMAKE_SIZEOF_VOID_P} * 8")
+ message(FATAL_ERROR
+ "Python config failure: Python is ${_PYTHON_BITS}-bit, "
+ "chosen compiler is ${_CMAKE_BITS}-bit")
+ endif()
+ set(PYTHONLIBS_FOUND FALSE)
+ return()
+endif()
+
+# The built-in FindPython didn't always give the version numbers
+string(REGEX REPLACE "\\." ";" _PYTHON_VERSION_LIST ${_PYTHON_VERSION_LIST})
+list(GET _PYTHON_VERSION_LIST 0 PYTHON_VERSION_MAJOR)
+list(GET _PYTHON_VERSION_LIST 1 PYTHON_VERSION_MINOR)
+list(GET _PYTHON_VERSION_LIST 2 PYTHON_VERSION_PATCH)
+
+# Make sure all directory separators are '/'
+string(REGEX REPLACE "\\\\" "/" PYTHON_PREFIX ${PYTHON_PREFIX})
+string(REGEX REPLACE "\\\\" "/" PYTHON_INCLUDE_DIR ${PYTHON_INCLUDE_DIR})
+string(REGEX REPLACE "\\\\" "/" PYTHON_SITE_PACKAGES ${PYTHON_SITE_PACKAGES})
+
+if(CMAKE_HOST_WIN32)
+ set(PYTHON_LIBRARY
+ "${PYTHON_PREFIX}/libs/Python${PYTHON_LIBRARY_SUFFIX}.lib")
+
+ # when run in a venv, PYTHON_PREFIX points to it. But the libraries remain in the
+ # original python installation. They may be found relative to PYTHON_INCLUDE_DIR.
+ if(NOT EXISTS "${PYTHON_LIBRARY}")
+ get_filename_component(_PYTHON_ROOT ${PYTHON_INCLUDE_DIR} DIRECTORY)
+ set(PYTHON_LIBRARY
+ "${_PYTHON_ROOT}/libs/Python${PYTHON_LIBRARY_SUFFIX}.lib")
+ endif()
+
+ # raise an error if the python libs are still not found.
+ if(NOT EXISTS "${PYTHON_LIBRARY}")
+ message(FATAL_ERROR "Python libraries not found")
+ endif()
+
+else()
+ if(PYTHON_MULTIARCH)
+ set(_PYTHON_LIBS_SEARCH "${PYTHON_LIBDIR}/${PYTHON_MULTIARCH}" "${PYTHON_LIBDIR}")
+ else()
+ set(_PYTHON_LIBS_SEARCH "${PYTHON_LIBDIR}")
+ endif()
+ #message(STATUS "Searching for Python libs in ${_PYTHON_LIBS_SEARCH}")
+ # Probably this needs to be more involved. It would be nice if the config
+ # information the python interpreter itself gave us were more complete.
+ find_library(PYTHON_LIBRARY
+ NAMES "python${PYTHON_LIBRARY_SUFFIX}"
+ PATHS ${_PYTHON_LIBS_SEARCH}
+ NO_DEFAULT_PATH)
+
+ # If all else fails, just set the name/version and let the linker figure out the path.
+ if(NOT PYTHON_LIBRARY)
+ set(PYTHON_LIBRARY python${PYTHON_LIBRARY_SUFFIX})
+ endif()
+endif()
+
+MARK_AS_ADVANCED(
+ PYTHON_LIBRARY
+ PYTHON_INCLUDE_DIR
+)
+
+# We use PYTHON_INCLUDE_DIR, PYTHON_LIBRARY and PYTHON_DEBUG_LIBRARY for the
+# cache entries because they are meant to specify the location of a single
+# library. We now set the variables listed by the documentation for this
+# module.
+SET(PYTHON_INCLUDE_DIRS "${PYTHON_INCLUDE_DIR}")
+SET(PYTHON_LIBRARIES "${PYTHON_LIBRARY}")
+SET(PYTHON_DEBUG_LIBRARIES "${PYTHON_DEBUG_LIBRARY}")
+
+find_package_message(PYTHON
+ "Found PythonLibs: ${PYTHON_LIBRARY}"
+ "${PYTHON_EXECUTABLE}${PYTHON_VERSION}")
+
+set(PYTHONLIBS_FOUND TRUE)
--- /dev/null
+# pybind11Config.cmake
+# --------------------
+#
+# PYBIND11 cmake module.
+# This module sets the following variables in your project::
+#
+# pybind11_FOUND - true if pybind11 and all required components found on the system
+# pybind11_VERSION - pybind11 version in format Major.Minor.Release
+# pybind11_INCLUDE_DIRS - Directories where pybind11 and python headers are located.
+# pybind11_INCLUDE_DIR - Directory where pybind11 headers are located.
+# pybind11_DEFINITIONS - Definitions necessary to use pybind11, namely USING_pybind11.
+# pybind11_LIBRARIES - compile flags and python libraries (as needed) to link against.
+# pybind11_LIBRARY - empty.
+# CMAKE_MODULE_PATH - appends location of accompanying FindPythonLibsNew.cmake and
+# pybind11Tools.cmake modules.
+#
+#
+# Available components: None
+#
+#
+# Exported targets::
+#
+# If pybind11 is found, this module defines the following :prop_tgt:`IMPORTED`
+# interface library targets::
+#
+# pybind11::module - for extension modules
+# pybind11::embed - for embedding the Python interpreter
+#
+# Python headers, libraries (as needed by platform), and the C++ standard
+# are attached to the target. Set PythonLibsNew variables to influence
+# python detection and PYBIND11_CPP_STANDARD (-std=c++11 or -std=c++14) to
+# influence standard setting. ::
+#
+# find_package(pybind11 CONFIG REQUIRED)
+# message(STATUS "Found pybind11 v${pybind11_VERSION}: ${pybind11_INCLUDE_DIRS}")
+#
+# # Create an extension module
+# add_library(mylib MODULE main.cpp)
+# target_link_libraries(mylib pybind11::module)
+#
+# # Or embed the Python interpreter into an executable
+# add_executable(myexe main.cpp)
+# target_link_libraries(myexe pybind11::embed)
+#
+# Suggested usage::
+#
+# find_package with version info is not recommended except for release versions. ::
+#
+# find_package(pybind11 CONFIG)
+# find_package(pybind11 2.0 EXACT CONFIG REQUIRED)
+#
+#
+# The following variables can be set to guide the search for this package::
+#
+# pybind11_DIR - CMake variable, set to directory containing this Config file
+# CMAKE_PREFIX_PATH - CMake variable, set to root directory of this package
+# PATH - environment variable, set to bin directory of this package
+# CMAKE_DISABLE_FIND_PACKAGE_pybind11 - CMake variable, disables
+# find_package(pybind11) when not REQUIRED, perhaps to force internal build
+
+
+####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() #######
+####### Any changes to this file will be overwritten by the next CMake run ####
+####### The input file was pybind11Config.cmake.in ########
+
+get_filename_component(PACKAGE_PREFIX_DIR "${CMAKE_CURRENT_LIST_DIR}/../../../" ABSOLUTE)
+
+macro(set_and_check _var _file)
+ set(${_var} "${_file}")
+ if(NOT EXISTS "${_file}")
+ message(FATAL_ERROR "File or directory ${_file} referenced by variable ${_var} does not exist !")
+ endif()
+endmacro()
+
+macro(check_required_components _NAME)
+ foreach(comp ${${_NAME}_FIND_COMPONENTS})
+ if(NOT ${_NAME}_${comp}_FOUND)
+ if(${_NAME}_FIND_REQUIRED_${comp})
+ set(${_NAME}_FOUND FALSE)
+ endif()
+ endif()
+ endforeach()
+endmacro()
+
+####################################################################################
+
+set(PN pybind11)
+
+# location of pybind11/pybind11.h
+set(${PN}_INCLUDE_DIR "${PACKAGE_PREFIX_DIR}/include")
+
+set(${PN}_LIBRARY "")
+set(${PN}_DEFINITIONS USING_${PN})
+
+check_required_components(${PN})
+
+# make detectable the FindPythonLibsNew.cmake module
+list(APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_LIST_DIR})
+
+include(pybind11Tools)
+
+if(NOT (CMAKE_VERSION VERSION_LESS 3.0))
+#-----------------------------------------------------------------------------
+# Don't include targets if this file is being picked up by another
+# project which has already built this as a subproject
+#-----------------------------------------------------------------------------
+if(NOT TARGET ${PN}::pybind11)
+ include("${CMAKE_CURRENT_LIST_DIR}/${PN}Targets.cmake")
+
+ find_package(PythonLibsNew ${PYBIND11_PYTHON_VERSION} MODULE REQUIRED)
+ set_property(TARGET ${PN}::pybind11 APPEND PROPERTY INTERFACE_INCLUDE_DIRECTORIES ${PYTHON_INCLUDE_DIRS})
+ set_property(TARGET ${PN}::embed APPEND PROPERTY INTERFACE_LINK_LIBRARIES ${PYTHON_LIBRARIES})
+ if(WIN32 OR CYGWIN)
+ set_property(TARGET ${PN}::module APPEND PROPERTY INTERFACE_LINK_LIBRARIES ${PYTHON_LIBRARIES})
+ endif()
+
+ set_property(TARGET ${PN}::pybind11 APPEND PROPERTY INTERFACE_COMPILE_OPTIONS "${PYBIND11_CPP_STANDARD}")
+
+ get_property(_iid TARGET ${PN}::pybind11 PROPERTY INTERFACE_INCLUDE_DIRECTORIES)
+ get_property(_ill TARGET ${PN}::module PROPERTY INTERFACE_LINK_LIBRARIES)
+ set(${PN}_INCLUDE_DIRS ${_iid})
+ set(${PN}_LIBRARIES ${_ico} ${_ill})
+endif()
+endif()
--- /dev/null
+# This is a basic version file for the Config-mode of find_package().
+# It is used by write_basic_package_version_file() as input file for configure_file()
+# to create a version-file which can be installed along a config.cmake file.
+#
+# The created file sets PACKAGE_VERSION_EXACT if the current version string and
+# the requested version string are exactly the same and it sets
+# PACKAGE_VERSION_COMPATIBLE if the current version is >= requested version.
+# The variable CVF_VERSION must be set before calling configure_file().
+
+set(PACKAGE_VERSION "2.2.4")
+
+if(PACKAGE_VERSION VERSION_LESS PACKAGE_FIND_VERSION)
+ set(PACKAGE_VERSION_COMPATIBLE FALSE)
+else()
+ set(PACKAGE_VERSION_COMPATIBLE TRUE)
+ if(PACKAGE_FIND_VERSION STREQUAL PACKAGE_VERSION)
+ set(PACKAGE_VERSION_EXACT TRUE)
+ endif()
+endif()
+
+# if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it:
+if("${CMAKE_SIZEOF_VOID_P}" STREQUAL "" OR "" STREQUAL "")
+ return()
+endif()
+
+# check that the installed version has the same 32/64bit-ness as the one which is currently searching:
+if(NOT CMAKE_SIZEOF_VOID_P STREQUAL "")
+ math(EXPR installedBits " * 8")
+ set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)")
+ set(PACKAGE_VERSION_UNSUITABLE TRUE)
+endif()
--- /dev/null
+# Generated by CMake
+
+if("${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}" LESS 2.5)
+ message(FATAL_ERROR "CMake >= 2.6.0 required")
+endif()
+cmake_policy(PUSH)
+cmake_policy(VERSION 2.6)
+#----------------------------------------------------------------
+# Generated CMake target import file.
+#----------------------------------------------------------------
+
+# Commands may need to know the format version.
+set(CMAKE_IMPORT_FILE_VERSION 1)
+
+# Protect against multiple inclusion, which would fail when already imported targets are added once more.
+set(_targetsDefined)
+set(_targetsNotDefined)
+set(_expectedTargets)
+foreach(_expectedTarget pybind11::pybind11 pybind11::module pybind11::embed)
+ list(APPEND _expectedTargets ${_expectedTarget})
+ if(NOT TARGET ${_expectedTarget})
+ list(APPEND _targetsNotDefined ${_expectedTarget})
+ endif()
+ if(TARGET ${_expectedTarget})
+ list(APPEND _targetsDefined ${_expectedTarget})
+ endif()
+endforeach()
+if("${_targetsDefined}" STREQUAL "${_expectedTargets}")
+ unset(_targetsDefined)
+ unset(_targetsNotDefined)
+ unset(_expectedTargets)
+ set(CMAKE_IMPORT_FILE_VERSION)
+ cmake_policy(POP)
+ return()
+endif()
+if(NOT "${_targetsDefined}" STREQUAL "")
+ message(FATAL_ERROR "Some (but not all) targets in this export set were already defined.\nTargets Defined: ${_targetsDefined}\nTargets not yet defined: ${_targetsNotDefined}\n")
+endif()
+unset(_targetsDefined)
+unset(_targetsNotDefined)
+unset(_expectedTargets)
+
+
+# Compute the installation prefix relative to this file.
+get_filename_component(_IMPORT_PREFIX "${CMAKE_CURRENT_LIST_FILE}" PATH)
+get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH)
+get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH)
+get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH)
+if(_IMPORT_PREFIX STREQUAL "/")
+ set(_IMPORT_PREFIX "")
+endif()
+
+# Create imported target pybind11::pybind11
+add_library(pybind11::pybind11 INTERFACE IMPORTED)
+
+set_target_properties(pybind11::pybind11 PROPERTIES
+ INTERFACE_INCLUDE_DIRECTORIES "${_IMPORT_PREFIX}/include"
+)
+
+# Create imported target pybind11::module
+add_library(pybind11::module INTERFACE IMPORTED)
+
+set_target_properties(pybind11::module PROPERTIES
+ INTERFACE_COMPILE_OPTIONS "-fvisibility=hidden"
+ INTERFACE_LINK_LIBRARIES "pybind11::pybind11"
+)
+
+# Create imported target pybind11::embed
+add_library(pybind11::embed INTERFACE IMPORTED)
+
+set_target_properties(pybind11::embed PROPERTIES
+ INTERFACE_LINK_LIBRARIES "pybind11::pybind11"
+)
+
+if(CMAKE_VERSION VERSION_LESS 3.0.0)
+ message(FATAL_ERROR "This file relies on consumers using CMake 3.0.0 or greater.")
+endif()
+
+# Load information for each installed configuration.
+get_filename_component(_DIR "${CMAKE_CURRENT_LIST_FILE}" PATH)
+file(GLOB CONFIG_FILES "${_DIR}/pybind11Targets-*.cmake")
+foreach(f ${CONFIG_FILES})
+ include(${f})
+endforeach()
+
+# Cleanup temporary variables.
+set(_IMPORT_PREFIX)
+
+# Loop over all imported files and verify that they actually exist
+foreach(target ${_IMPORT_CHECK_TARGETS} )
+ foreach(file ${_IMPORT_CHECK_FILES_FOR_${target}} )
+ if(NOT EXISTS "${file}" )
+ message(FATAL_ERROR "The imported target \"${target}\" references the file
+ \"${file}\"
+but this file does not exist. Possible reasons include:
+* The file was deleted, renamed, or moved to another location.
+* An install or uninstall procedure did not complete successfully.
+* The installation package was faulty and contained
+ \"${CMAKE_CURRENT_LIST_FILE}\"
+but not all the files it references.
+")
+ endif()
+ endforeach()
+ unset(_IMPORT_CHECK_FILES_FOR_${target})
+endforeach()
+unset(_IMPORT_CHECK_TARGETS)
+
+# This file does not depend on other imported targets which have
+# been exported from the same project but in a separate export set.
+
+# Commands beyond this point should not need to know the version.
+set(CMAKE_IMPORT_FILE_VERSION)
+cmake_policy(POP)
--- /dev/null
+# tools/pybind11Tools.cmake -- Build system for the pybind11 modules
+#
+# Copyright (c) 2015 Wenzel Jakob <wenzel@inf.ethz.ch>
+#
+# All rights reserved. Use of this source code is governed by a
+# BSD-style license that can be found in the LICENSE file.
+
+cmake_minimum_required(VERSION 2.8.12)
+
+# Add a CMake parameter for choosing a desired Python version
+if(NOT PYBIND11_PYTHON_VERSION)
+ set(PYBIND11_PYTHON_VERSION "" CACHE STRING "Python version to use for compiling modules")
+endif()
+
+set(Python_ADDITIONAL_VERSIONS 3.7 3.6 3.5 3.4)
+find_package(PythonLibsNew ${PYBIND11_PYTHON_VERSION} REQUIRED)
+
+include(CheckCXXCompilerFlag)
+include(CMakeParseArguments)
+
+if(NOT PYBIND11_CPP_STANDARD AND NOT CMAKE_CXX_STANDARD)
+ if(NOT MSVC)
+ check_cxx_compiler_flag("-std=c++14" HAS_CPP14_FLAG)
+
+ if (HAS_CPP14_FLAG)
+ set(PYBIND11_CPP_STANDARD -std=c++14)
+ else()
+ check_cxx_compiler_flag("-std=c++11" HAS_CPP11_FLAG)
+ if (HAS_CPP11_FLAG)
+ set(PYBIND11_CPP_STANDARD -std=c++11)
+ else()
+ message(FATAL_ERROR "Unsupported compiler -- pybind11 requires C++11 support!")
+ endif()
+ endif()
+ elseif(MSVC)
+ set(PYBIND11_CPP_STANDARD /std:c++14)
+ endif()
+
+ set(PYBIND11_CPP_STANDARD ${PYBIND11_CPP_STANDARD} CACHE STRING
+ "C++ standard flag, e.g. -std=c++11, -std=c++14, /std:c++14. Defaults to C++14 mode." FORCE)
+endif()
+
+# Checks whether the given CXX/linker flags can compile and link a cxx file. cxxflags and
+# linkerflags are lists of flags to use. The result variable is a unique variable name for each set
+# of flags: the compilation result will be cached base on the result variable. If the flags work,
+# sets them in cxxflags_out/linkerflags_out internal cache variables (in addition to ${result}).
+function(_pybind11_return_if_cxx_and_linker_flags_work result cxxflags linkerflags cxxflags_out linkerflags_out)
+ set(CMAKE_REQUIRED_LIBRARIES ${linkerflags})
+ check_cxx_compiler_flag("${cxxflags}" ${result})
+ if (${result})
+ set(${cxxflags_out} "${cxxflags}" CACHE INTERNAL "" FORCE)
+ set(${linkerflags_out} "${linkerflags}" CACHE INTERNAL "" FORCE)
+ endif()
+endfunction()
+
+# Internal: find the appropriate link time optimization flags for this compiler
+function(_pybind11_add_lto_flags target_name prefer_thin_lto)
+ if (NOT DEFINED PYBIND11_LTO_CXX_FLAGS)
+ set(PYBIND11_LTO_CXX_FLAGS "" CACHE INTERNAL "")
+ set(PYBIND11_LTO_LINKER_FLAGS "" CACHE INTERNAL "")
+
+ if(CMAKE_CXX_COMPILER_ID MATCHES "GNU|Clang")
+ set(cxx_append "")
+ set(linker_append "")
+ if (CMAKE_CXX_COMPILER_ID MATCHES "Clang" AND NOT APPLE)
+ # Clang Gold plugin does not support -Os; append -O3 to MinSizeRel builds to override it
+ set(linker_append ";$<$<CONFIG:MinSizeRel>:-O3>")
+ elseif(CMAKE_CXX_COMPILER_ID MATCHES "GNU")
+ set(cxx_append ";-fno-fat-lto-objects")
+ endif()
+
+ if (CMAKE_CXX_COMPILER_ID MATCHES "Clang" AND prefer_thin_lto)
+ _pybind11_return_if_cxx_and_linker_flags_work(HAS_FLTO_THIN
+ "-flto=thin${cxx_append}" "-flto=thin${linker_append}"
+ PYBIND11_LTO_CXX_FLAGS PYBIND11_LTO_LINKER_FLAGS)
+ endif()
+
+ if (NOT HAS_FLTO_THIN)
+ _pybind11_return_if_cxx_and_linker_flags_work(HAS_FLTO
+ "-flto${cxx_append}" "-flto${linker_append}"
+ PYBIND11_LTO_CXX_FLAGS PYBIND11_LTO_LINKER_FLAGS)
+ endif()
+ elseif (CMAKE_CXX_COMPILER_ID MATCHES "Intel")
+ # Intel equivalent to LTO is called IPO
+ _pybind11_return_if_cxx_and_linker_flags_work(HAS_INTEL_IPO
+ "-ipo" "-ipo" PYBIND11_LTO_CXX_FLAGS PYBIND11_LTO_LINKER_FLAGS)
+ elseif(MSVC)
+ # cmake only interprets libraries as linker flags when they start with a - (otherwise it
+ # converts /LTCG to \LTCG as if it was a Windows path). Luckily MSVC supports passing flags
+ # with - instead of /, even if it is a bit non-standard:
+ _pybind11_return_if_cxx_and_linker_flags_work(HAS_MSVC_GL_LTCG
+ "/GL" "-LTCG" PYBIND11_LTO_CXX_FLAGS PYBIND11_LTO_LINKER_FLAGS)
+ endif()
+
+ if (PYBIND11_LTO_CXX_FLAGS)
+ message(STATUS "LTO enabled")
+ else()
+ message(STATUS "LTO disabled (not supported by the compiler and/or linker)")
+ endif()
+ endif()
+
+ # Enable LTO flags if found, except for Debug builds
+ if (PYBIND11_LTO_CXX_FLAGS)
+ target_compile_options(${target_name} PRIVATE "$<$<NOT:$<CONFIG:Debug>>:${PYBIND11_LTO_CXX_FLAGS}>")
+ endif()
+ if (PYBIND11_LTO_LINKER_FLAGS)
+ target_link_libraries(${target_name} PRIVATE "$<$<NOT:$<CONFIG:Debug>>:${PYBIND11_LTO_LINKER_FLAGS}>")
+ endif()
+endfunction()
+
+# Build a Python extension module:
+# pybind11_add_module(<name> [MODULE | SHARED] [EXCLUDE_FROM_ALL]
+# [NO_EXTRAS] [THIN_LTO] source1 [source2 ...])
+#
+function(pybind11_add_module target_name)
+ set(options MODULE SHARED EXCLUDE_FROM_ALL NO_EXTRAS THIN_LTO)
+ cmake_parse_arguments(ARG "${options}" "" "" ${ARGN})
+
+ if(ARG_MODULE AND ARG_SHARED)
+ message(FATAL_ERROR "Can't be both MODULE and SHARED")
+ elseif(ARG_SHARED)
+ set(lib_type SHARED)
+ else()
+ set(lib_type MODULE)
+ endif()
+
+ if(ARG_EXCLUDE_FROM_ALL)
+ set(exclude_from_all EXCLUDE_FROM_ALL)
+ endif()
+
+ add_library(${target_name} ${lib_type} ${exclude_from_all} ${ARG_UNPARSED_ARGUMENTS})
+
+ target_include_directories(${target_name}
+ PRIVATE ${PYBIND11_INCLUDE_DIR} # from project CMakeLists.txt
+ PRIVATE ${pybind11_INCLUDE_DIR} # from pybind11Config
+ PRIVATE ${PYTHON_INCLUDE_DIRS})
+
+ # Python debug libraries expose slightly different objects
+ # https://docs.python.org/3.6/c-api/intro.html#debugging-builds
+ # https://stackoverflow.com/questions/39161202/how-to-work-around-missing-pymodule-create2-in-amd64-win-python35-d-lib
+ if(PYTHON_IS_DEBUG)
+ target_compile_definitions(${target_name} PRIVATE Py_DEBUG)
+ endif()
+
+ # The prefix and extension are provided by FindPythonLibsNew.cmake
+ set_target_properties(${target_name} PROPERTIES PREFIX "${PYTHON_MODULE_PREFIX}")
+ set_target_properties(${target_name} PROPERTIES SUFFIX "${PYTHON_MODULE_EXTENSION}")
+
+ # -fvisibility=hidden is required to allow multiple modules compiled against
+ # different pybind versions to work properly, and for some features (e.g.
+ # py::module_local). We force it on everything inside the `pybind11`
+ # namespace; also turning it on for a pybind module compilation here avoids
+ # potential warnings or issues from having mixed hidden/non-hidden types.
+ set_target_properties(${target_name} PROPERTIES CXX_VISIBILITY_PRESET "hidden")
+
+ if(WIN32 OR CYGWIN)
+ # Link against the Python shared library on Windows
+ target_link_libraries(${target_name} PRIVATE ${PYTHON_LIBRARIES})
+ elseif(APPLE)
+ # It's quite common to have multiple copies of the same Python version
+ # installed on one's system. E.g.: one copy from the OS and another copy
+ # that's statically linked into an application like Blender or Maya.
+ # If we link our plugin library against the OS Python here and import it
+ # into Blender or Maya later on, this will cause segfaults when multiple
+ # conflicting Python instances are active at the same time (even when they
+ # are of the same version).
+
+ # Windows is not affected by this issue since it handles DLL imports
+ # differently. The solution for Linux and Mac OS is simple: we just don't
+ # link against the Python library. The resulting shared library will have
+ # missing symbols, but that's perfectly fine -- they will be resolved at
+ # import time.
+
+ target_link_libraries(${target_name} PRIVATE "-undefined dynamic_lookup")
+
+ if(ARG_SHARED)
+ # Suppress CMake >= 3.0 warning for shared libraries
+ set_target_properties(${target_name} PROPERTIES MACOSX_RPATH ON)
+ endif()
+ endif()
+
+ # Make sure C++11/14 are enabled
+ target_compile_options(${target_name} PUBLIC ${PYBIND11_CPP_STANDARD})
+
+ if(ARG_NO_EXTRAS)
+ return()
+ endif()
+
+ _pybind11_add_lto_flags(${target_name} ${ARG_THIN_LTO})
+
+ if (NOT MSVC AND NOT ${CMAKE_BUILD_TYPE} MATCHES Debug)
+ # Strip unnecessary sections of the binary on Linux/Mac OS
+ if(CMAKE_STRIP)
+ if(APPLE)
+ add_custom_command(TARGET ${target_name} POST_BUILD
+ COMMAND ${CMAKE_STRIP} -x $<TARGET_FILE:${target_name}>)
+ else()
+ add_custom_command(TARGET ${target_name} POST_BUILD
+ COMMAND ${CMAKE_STRIP} $<TARGET_FILE:${target_name}>)
+ endif()
+ endif()
+ endif()
+
+ if(MSVC)
+ # /MP enables multithreaded builds (relevant when there are many files), /bigobj is
+ # needed for bigger binding projects due to the limit to 64k addressable sections
+ target_compile_options(${target_name} PRIVATE /MP /bigobj)
+ endif()
+endfunction()