X-Git-Url: http://info.iut-bm.univ-fcomte.fr/pub/gitweb/simgrid.git/blobdiff_plain/e4abd3f271729beeff499da36267bfb274dd1f6d..5c870de168c1b4e8e02e0aa94b094d33eb734efb:/doc/Doxyfile.in diff --git a/doc/Doxyfile.in b/doc/Doxyfile.in index 38f7f6f1ba..003f6694a3 100644 --- a/doc/Doxyfile.in +++ b/doc/Doxyfile.in @@ -41,7 +41,7 @@ PROJECT_NUMBER = @release_version@ # for a project that appears at the top of each page and should give viewer # a quick idea about the purpose of the project. Keep the description short. -PROJECT_BRIEF = "Scalable simulation of distributed systems" +PROJECT_BRIEF = "Versatile Simulation of Distributed Systems" # With the PROJECT_LOGO tag one can specify an logo or icon that is # included in the documentation. The maximum height of the logo should not @@ -116,7 +116,7 @@ ALWAYS_DETAILED_SEC = NO # members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. -INLINE_INHERITED_MEMB = YES +INLINE_INHERITED_MEMB = NO # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full # path before files name in the file list and in the header files. If set @@ -131,7 +131,8 @@ FULL_PATH_NAMES = YES # If left blank the directory from which doxygen is run is used as the # path to strip. -STRIP_FROM_PATH = @srcdir@ +STRIP_FROM_PATH = @CMAKE_HOME_DIRECTORY@ \ + @CMAKE_BINARY_DIR@ # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of # the path mentioned in the documentation of a class, which tells @@ -154,13 +155,13 @@ SHORT_NAMES = NO # comments will behave just like regular Qt-style comments # (thus requiring an explicit @brief command for a brief description.) -JAVADOC_AUTOBRIEF = NO +JAVADOC_AUTOBRIEF = YES # If the QT_AUTOBRIEF tag is set to YES then Doxygen will # interpret the first line (until the first dot) of a Qt-style # comment as the brief description. If set to NO, the comments # will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) +# an explicit @brief command for a brief description.) QT_AUTOBRIEF = NO @@ -196,7 +197,7 @@ TAB_SIZE = 8 # will result in a user-defined paragraph with heading "Side Effects:". # You can put \n's in the value part of an alias to insert newlines. -ALIASES = +ALIASES = SimGridRelease="SimGrid-@release_version@" # This tag can be used to specify a number of word-keyword mappings (TCL only). # A mapping has the form "name=value". For example adding @@ -210,7 +211,7 @@ TCL_SUBST = # For instance, some of the names that are used will be different. The list # of all members will be omitted, etc. -OPTIMIZE_OUTPUT_FOR_C = YES +OPTIMIZE_OUTPUT_FOR_C = NO # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java # sources only. Doxygen will then generate output that is more tailored for @@ -322,22 +323,6 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - # Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be # set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given # their name and scope. Since this can be an expensive process and often the @@ -358,7 +343,7 @@ LOOKUP_CACHE_SIZE = 0 # Private class members and static file members will be hidden unless # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES -EXTRACT_ALL = NO +EXTRACT_ALL = YES # If the EXTRACT_PRIVATE tag is set to YES all private members of a class # will be included in the documentation. @@ -401,7 +386,7 @@ EXTRACT_ANON_NSPACES = NO # various overviews, but no documentation section is generated. # This option has no effect if EXTRACT_ALL is enabled. -HIDE_UNDOC_MEMBERS = YES +HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. @@ -415,7 +400,7 @@ HIDE_UNDOC_CLASSES = YES # If set to NO (the default) these declarations will be included in the # documentation. -HIDE_FRIEND_COMPOUNDS = NO +HIDE_FRIEND_COMPOUNDS = YES # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any # documentation blocks found inside the body of a function. @@ -515,7 +500,7 @@ STRICT_PROTO_MATCHING = NO # disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. -GENERATE_TODOLIST = YES +GENERATE_TODOLIST = NO # The GENERATE_TESTLIST tag can be used to enable (YES) or # disable (NO) the test list. This list is created by putting \test @@ -527,7 +512,7 @@ GENERATE_TESTLIST = YES # disable (NO) the bug list. This list is created by putting \bug # commands in the documentation. -GENERATE_BUGLIST = YES +GENERATE_BUGLIST = NO # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or # disable (NO) the deprecated list. This list is created by putting @@ -586,7 +571,7 @@ FILE_VERSION_FILTER = # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. -LAYOUT_FILE = SimgridDoxygenLayout.xml +LAYOUT_FILE = @CMAKE_HOME_DIRECTORY@/doc/Layout.xml # The CITE_BIB_FILES tag can be used to specify one or more bib files # containing the references data. This must be a list of .bib files. The @@ -617,7 +602,7 @@ WARNINGS = YES # for undocumented members. If EXTRACT_ALL is set to YES then this flag will # automatically be disabled. -WARN_IF_UNDOCUMENTED = YES +WARN_IF_UNDOCUMENTED = NO # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for # potential errors in the documentation, such as not documenting some @@ -658,9 +643,53 @@ WARN_LOGFILE = # directories like "/usr/src/myproject". Separate the files or directories # with spaces. -INPUT = index.doc \ - FAQ.doc - +INPUT = @CMAKE_HOME_DIRECTORY@/doc/doxygen/index.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/getting_started.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/install.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/install_yours.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/application.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/java.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/platform.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/models.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/ns3.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/platform_lua.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/scenario.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/deployment.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/options.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/outcomes.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/outcomes_logs.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/outcomes_vizu.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/outcomes_MC.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/tutorial_smpi.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/examples.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/howtos.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/uhood.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/uhood_arch.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/uhood_switch.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside_doxygen.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside_extending.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside_cmake.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside_tests.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/inside_release.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/community.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/FAQ.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-msg.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-sd.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-index.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-xbt.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-s4u.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-surf.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-simix.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-smpi.doc \ + @CMAKE_HOME_DIRECTORY@/doc/doxygen/module-trace.doc \ + @CMAKE_BINARY_DIR@/doc/doxygen/logcategories.doc \ + @CMAKE_HOME_DIRECTORY@/include/ \ + @CMAKE_HOME_DIRECTORY@/src/plugins/ \ + @CMAKE_HOME_DIRECTORY@/examples/deprecated/msg/README.doc \ + @CMAKE_HOME_DIRECTORY@/examples/s4u/README.doc + + # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is # also the default input encoding. Doxygen uses libiconv (or the iconv built @@ -683,7 +712,7 @@ FILE_PATTERNS = # should be searched for input files as well. Possible values are YES and NO. # If left blank NO is used. -RECURSIVE = NO +RECURSIVE = YES # The EXCLUDE tag can be used to specify files and/or directories that should be # excluded from the INPUT source files. This way you can easily exclude a @@ -691,13 +720,13 @@ RECURSIVE = NO # Note that relative paths are relative to the directory from which doxygen is # run. -EXCLUDE = +EXCLUDE = # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded # from the input. -EXCLUDE_SYMLINKS = NO +EXCLUDE_SYMLINKS = YES # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude @@ -705,7 +734,18 @@ EXCLUDE_SYMLINKS = NO # against the file with absolute path, so to exclude all test directories # for example use the pattern */test/* -EXCLUDE_PATTERNS = +EXCLUDE_PATTERNS = */include/simgrid/forward.h +EXCLUDE_PATTERNS += */include/smpi/* + +EXCLUDE_PATTERNS += @CMAKE_HOME_DIRECTORY@/src/surf/xml/simgrid_dtd.* +EXCLUDE_PATTERNS += @CMAKE_HOME_DIRECTORY@/src/simdag/dax_dtd.* +EXCLUDE_PATTERNS += @CMAKE_HOME_DIRECTORY@/src/xbt/automaton/parserPromela.* +EXCLUDE_PATTERNS += @CMAKE_HOME_DIRECTORY@/src/bindings/java/*.cpp @CMAKE_HOME_DIRECTORY@/src/bindings/java/*.h +EXCLUDE_PATTERNS += @CMAKE_HOME_DIRECTORY@/src/simix/popping_accessors.hpp \ + @CMAKE_HOME_DIRECTORY@/src/simix/popping_bodies.cpp \ + @CMAKE_HOME_DIRECTORY@/src/simix/popping_enum.h \ + @CMAKE_HOME_DIRECTORY@/src/simix/popping_generated.cpp + # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names # (namespaces, classes, functions, etc.) that should be excluded from the @@ -713,17 +753,23 @@ EXCLUDE_PATTERNS = # wildcard * is used, a substring. Examples: ANamespace, AClass, # AClass::ANamespace, ANamespace::*Test -EXCLUDE_SYMBOLS = +EXCLUDE_SYMBOLS = s_xbt_dict_cursor s_xbt_dictelm xbt_dynar_s +EXCLUDE_SYMBOLS += xbt_edge xbt_graph xbt_node +EXCLUDE_SYMBOLS += e_xbt_parmap_mode_t +EXCLUDE_SYMBOLS += MPI_* # The EXAMPLE_PATH tag can be used to specify one or more files or # directories that contain example code fragments that are included (see # the \include command). EXAMPLE_PATH = ./ \ - @top_srcdir@/src/surf/ \ - @top_srcdir@/src/xbt/ \ - @top_srcdir@/examples \ - @top_srcdir@/testsuite + @CMAKE_HOME_DIRECTORY@/doc/ \ + @CMAKE_HOME_DIRECTORY@/src/surf/ \ + @CMAKE_HOME_DIRECTORY@/src/surf/xml/ \ + @CMAKE_HOME_DIRECTORY@/src/xbt/ \ + @CMAKE_HOME_DIRECTORY@/include \ + @CMAKE_HOME_DIRECTORY@/examples \ + @CMAKE_BINARY_DIR@/doc/example_lists # If the value of the EXAMPLE_PATH tag contains directories, you can use the # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp @@ -743,7 +789,8 @@ EXAMPLE_RECURSIVE = YES # directories that contain image that are included in the documentation (see # the \image command). -IMAGE_PATH = @top_srcdir@/doc +IMAGE_PATH = @CMAKE_HOME_DIRECTORY@/doc \ + @CMAKE_HOME_DIRECTORY@/doc/webcruft # The INPUT_FILTER tag can be used to specify a program that doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program @@ -801,7 +848,7 @@ INLINE_SOURCES = NO # doxygen to hide any special comment blocks from generated source code # fragments. Normal C and C++ comments will always remain visible. -STRIP_CODE_COMMENTS = YES +STRIP_CODE_COMMENTS = NO # If the REFERENCED_BY_RELATION tag is set to YES # then for each documented function all documented @@ -821,7 +868,7 @@ REFERENCES_RELATION = NO # link to the source code. # Otherwise they will link to the documentation. -REFERENCES_LINK_SOURCE = YES +REFERENCES_LINK_SOURCE = NO # If the USE_HTAGS tag is set to YES then the references to source code # will point to the HTML generated by the htags(1) tool instead of doxygen @@ -881,25 +928,6 @@ HTML_OUTPUT = html HTML_FILE_EXTENSION = .html -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. Note that when using a custom header you are responsible -# for the proper inclusion of any scripts and style sheets that doxygen -# needs, which is dependent on the configuration options used. -# It is advised to generate a default header using "doxygen -w html -# header.html footer.html stylesheet.css YourConfigFile" and then modify -# that header. Note that the header is subject to change so you typically -# have to redo this when upgrading to a newer version of doxygen or when -# changing the value of configuration settings such as GENERATE_TREEVIEW! - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to # fine-tune the look of the HTML output. If the tag is left blank doxygen @@ -907,7 +935,7 @@ HTML_FOOTER = # the style sheet file to the HTML output directory, so don't put your own # style sheet in the HTML output directory as well, or it will be erased! -HTML_STYLESHEET = +HTML_STYLESHEET = @CMAKE_HOME_DIRECTORY@/doc/doxygen/stylesheet.css # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note @@ -947,7 +975,7 @@ HTML_COLORSTYLE_GAMMA = 80 # page will contain the date and time when the page was generated. Setting # this to NO can help when comparing the output of multiple runs. -HTML_TIMESTAMP = YES +HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the @@ -1123,7 +1151,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1135,7 +1163,7 @@ DISABLE_INDEX = NO # Since the tree basically has the same information as the tab index you # could consider to set DISABLE_INDEX to NO when enabling this option. -GENERATE_TREEVIEW = NO +GENERATE_TREEVIEW = YES # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values # (range [0,1..20]) that doxygen will group on one line in the generated HTML @@ -1178,7 +1206,7 @@ FORMULA_TRANSPARENT = YES # output. When enabled you may also need to install MathJax separately and # configure the path to it using the MATHJAX_RELPATH option. -USE_MATHJAX = NO +USE_MATHJAX = YES # When MathJax is enabled you need to specify the location relative to the # HTML output directory using the MATHJAX_RELPATH option. The destination @@ -1190,7 +1218,7 @@ USE_MATHJAX = NO # However, it is strongly recommended to install a local # copy of MathJax from http://www.mathjax.org before deployment. -MATHJAX_RELPATH = http://www.mathjax.org/mathjax +MATHJAX_RELPATH = https://cdn.mathjax.org/mathjax/latest/MathJax.js?config=TeX-AMS_HTML # The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension # names that should be enabled during MathJax rendering. @@ -1205,7 +1233,7 @@ MATHJAX_EXTENSIONS = # typically be disabled. For large projects the javascript based search engine # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. -SEARCHENGINE = NO +SEARCHENGINE = YES # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a PHP enabled web server instead of at the web client @@ -1224,97 +1252,7 @@ SERVER_BASED_SEARCH = NO # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # generate Latex output. -GENERATE_LATEX = YES - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the -# Makefile that is written to the output directory. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = YES - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = pdfpages - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for -# the generated latex document. The footer should contain everything after -# the last chapter. If it is left blank doxygen will generate a -# standard footer. Notice: only use this tag if you know what you are doing! - -LATEX_FOOTER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -# If LATEX_SOURCE_CODE is set to YES then doxygen will include -# source code with syntax highlighting in the LaTeX output. -# Note that which sources are shown also depends on other settings -# such as SOURCE_BROWSER. - -LATEX_SOURCE_CODE = NO - -# The LATEX_BIB_STYLE tag can be used to specify the style to use for the -# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See -# http://en.wikipedia.org/wiki/BibTeX for more info. - -LATEX_BIB_STYLE = plain +GENERATE_LATEX = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output @@ -1394,32 +1332,7 @@ MAN_LINKS = NO # generate an XML file that captures the structure of # the code including all documentation. -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = YES +GENERATE_XML = YES #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output @@ -1517,12 +1430,21 @@ INCLUDE_FILE_PATTERNS = # undefined via #undef or recursively expanded use the := operator # instead of the = operator. -PREDEFINED = DOXYGEN \ - DOXYGEN_SKIP_IT \ +PREDEFINED = __cplusplus \ + DOXYGEN \ XBT_PUBLIC= \ + XBT_EXPORT_NO_IMPORT= \ + XBT_IMPORT_NO_EXPORT= \ + XBT_PUBLIC_DATA=extern \ + XBT_PUBLIC= \ XBT_INLINE= \ - HAVE_TRACING \ - MSG_USE_DEPRECATED + XBT_ALWAYS_INLINE= \ + XBT_PRIVATE= \ + XBT_ATTRIB_NORETURN= \ + XBT_ATTRIB_UNUSED= \ + XBT_ATTRIB_DEPRECATED_v323(m)= \ + XBT_ATTRIB_DEPRECATED_v324(m)= \ + XBT_ATTRIB_DEPRECATED_v325(m)= # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. @@ -1530,7 +1452,9 @@ PREDEFINED = DOXYGEN \ # Use the PREDEFINED tag if you want to use a different macro definition that # overrules the definition found in the source code. -EXPAND_AS_DEFINED = +EXPAND_AS_DEFINED = COLL_APPLY COLL_GATHERS COLL_ALLGATHERS COLL_ALLGATHERVS COLL_ALLREDUCES COLL_ALLTOALLS \ + COLL_ALLTOALLVS COLL_BCASTS COLL_REDUCES COLL_REDUCE_SCATTERS COLL_SCATTERS COLL_BARRIERS \ + MPI_CALL # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then # doxygen's preprocessor will remove all references to function-like macros @@ -1556,9 +1480,7 @@ SKIP_FUNCTION_MACROS = YES # NOT include the path). If a tag file is not located in the directory in which # doxygen is run, you must also specify the path to the tagfile here. -TAGFILES = shared/doxygen/simgridrefguide.tag=ref_guide/html/ \ - shared/doxygen/simgriduserguide.tag=user_guide/html/ \ - shared/doxygen/simgriddevguide.tag=dev_guide/html/ +TAGFILES = # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. @@ -1592,7 +1514,7 @@ PERL_PATH = /usr/bin/perl # this option also works with HAVE_DOT disabled, but it is recommended to # install and use dot, since it yields more powerful graphs. -CLASS_DIAGRAMS = YES +CLASS_DIAGRAMS = NO # You can define message sequence charts within doxygen comments using the \msc # command. Doxygen will then run the mscgen tool (see @@ -1711,7 +1633,7 @@ CALL_GRAPH = NO # the time of a run. So in most cases it will be better to enable caller # graphs for selected functions only using the \callergraph command. -CALLER_GRAPH = YES +CALLER_GRAPH = NO # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will generate a graphical hierarchy of all classes instead of a textual one. @@ -1731,7 +1653,7 @@ DIRECTORY_GRAPH = YES # HTML_FILE_EXTENSION to xhtml in order to make the SVG files # visible in IE 9+ (other browsers do not have this requirement). -DOT_IMAGE_FORMAT = png +DOT_IMAGE_FORMAT = svg # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to # enable generation of interactive SVG images that allow zooming and panning.