X-Git-Url: http://info.iut-bm.univ-fcomte.fr/pub/gitweb/simgrid.git/blobdiff_plain/a2edf8c05c4c543c8926cb454d2fb66cb5e8a0d8..af537f85d61a303b8f2c0b0707fbb3116dca2126:/CMakeLists.txt

diff --git a/CMakeLists.txt b/CMakeLists.txt
index 14db0b4bab..34d5caa427 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 2.8.8)
+cmake_minimum_required(VERSION 3.5)
 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
 
@@ -15,81 +15,75 @@ endif()
 
 ## 
 ## Check the C/C++ standard that we need
-##   See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
-if (MSVC)
-  message("-- You are compiling SimGrid with MicroSoft Visual C. Good luck.")
-
-  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D_SCL_SECURE_NO_WARNINGS")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_SCL_SECURE_NO_WARNINGS")
-else() # gcc or clang
-  INCLUDE(CheckCCompilerFlag)
-  CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
-
-  ## Request full debugging flags
-  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
-  set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
-
-  if (CMAKE_COMPILER_IS_GNUCC)    
-    if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
-      message(FATAL_ERROR
-              "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
-  	      "You need a sufficient support of c++11 to compile SimGrid.")
-    endif()
+##   See also tools/cmake/Flags.cmake that sets our paranoid warning flags
+INCLUDE(CheckCCompilerFlag)
+CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
+
+## Request full debugging flags
+set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
+set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
+
+if (CMAKE_COMPILER_IS_GNUCC)    
+  if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
+    message(FATAL_ERROR
+            "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
+            "You need a sufficient support of c++11 to compile SimGrid.")
   endif()
+endif()
 
-  ## We need a decent support of the c++11 standard
-  include(CheckCXXCompilerFlag)
-  CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
-  if(COMPILER_SUPPORTS_CXX11)
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
-  else() 
-    message(FATAL_ERROR 
-            "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
-            "Please use a decent C++ compiler.")
-  endif()
+## We need a decent support of the C++11 and C11 standards
+set(CMAKE_CXX_STANDARD 11)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
 
-  ### And we need C11 standard, too
-  include(CheckCCompilerFlag)
-  CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
-  if(COMPILER_SUPPORTS_C11)
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
-  else()
-    message(FATAL_ERROR 
-            "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
-            "Please use a decent C compiler "
-            "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
-  endif()
-  if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
-      ### gcc 4.[1-5] cannot compile ucontext on OSX
-      message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
-      set(HAVE_UCONTEXT_H 0)
-  endif()
-endif() # NOT MSVC
+set(CMAKE_C_STANDARD 11)
+set(CMAKE_C_STANDARD_REQUIRED ON)
+
+if (CMAKE_C_COMPILER_ID STREQUAL "Intel" AND CMAKE_C11_EXTENSION_COMPILE_OPTION STREQUAL "-std=c11")
+  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
+endif()
+
+### Check threading support
+set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
+find_package(Threads)
+
+### Setup Options
+include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
 
 ### SMPI vs. Fortran
-if ((NOT DEFINED enable_smpi OR enable_smpi) AND NOT APPLE) # smpi is enabled by default
-  # Call enable_language(Fortran) in order to load the build rules for
-  # this language, needed by teshsuite/smpi/mpich-test/.  Use
-  # CMAKE_FORCE_Fortran_COMPILER to bypass checks for a working
-  # compiler (smpiff don't exist at configure time).
-  include(CMakeForceCompiler)
-  if(NOT COMMAND CMAKE_FORCE_Fortran_COMPILER)
-    MACRO(CMAKE_FORCE_Fortran_COMPILER compiler id)
-      SET(CMAKE_Fortran_COMPILER "${compiler}")
-      SET(CMAKE_Fortran_COMPILER_ID_RUN TRUE)
-      SET(CMAKE_Fortran_COMPILER_ID ${id})
-      SET(CMAKE_Fortran_COMPILER_WORKS TRUE)
-      SET(CMAKE_Fortran_COMPILER_FORCED TRUE)
-
-      # Set old compiler id variables.
-      IF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
-        SET(CMAKE_COMPILER_IS_GNUG77 1)
-      ENDIF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
-    ENDMACRO(CMAKE_FORCE_Fortran_COMPILER)
+if ((NOT DEFINED enable_smpi) OR enable_smpi) 
+  # First unset the compiler in case we're re-running cmake over a previous
+  # configuration where it was saved as smpiff
+  unset(CMAKE_Fortran_COMPILER)
+  
+  SET(SMPI_FORTRAN 0)
+  if(enable_fortran)
+    enable_language(Fortran OPTIONAL)
   endif()
-  CMAKE_FORCE_Fortran_COMPILER(smpiff smpiff)
-  enable_language(Fortran OPTIONAL)
+  
+  if(CMAKE_Fortran_COMPILER)
+
+    # Fortran compiler detected: save it, then replace by smpiff
+    set(SMPI_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
+
+	# Set flags/libs to be used in smpiff
+    if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
+      set(SMPI_Fortran_FLAGS "\"-fpic\" \"-ff2c\" \"-fno-second-underscore\"")
+      set(SMPI_Fortran_LIBS "\"-lgfortran\"")
+      set(SMPI_GFORTRAN 1)
+    elseif(CMAKE_Fortran_COMPILER_ID MATCHES "Intel")
+      set(SMPI_Fortran_FLAGS "\"-fPIC\" \"-nofor-main\"")
+      set(SMPI_Fortran_LIBS "\"-lifcore\"")
+      set(SMPI_IFORT 1)
+    elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI|Flang") # flang
+      set(SMPI_Fortran_FLAGS "\"-fPIC\"")
+      set(SMPI_Fortran_LIBS "")
+      set(SMPI_FLANG 1)
+    endif()
+
+    set(SMPI_FORTRAN 1)
+  endif(CMAKE_Fortran_COMPILER)
+
 endif()
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -97,11 +91,11 @@ endif()
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 
 set(SIMGRID_VERSION_MAJOR "3")
-set(SIMGRID_VERSION_MINOR "13")
-set(SIMGRID_VERSION_PATCH "0")
-set(SIMGRID_VERSION_EXTRA "-devel") # Extra words to add to version string (e.g. -rc1)
+set(SIMGRID_VERSION_MINOR "22")
+set(SIMGRID_VERSION_PATCH "90")
+set(SIMGRID_VERSION_EXTRA "-DEVEL") # Extra words to add to version string (e.g. -rc1)
 
-set(SIMGRID_VERSION_DATE  "2016") # Year for copyright information
+set(SIMGRID_VERSION_DATE  "2019") # Year for copyright information
 
 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
   set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
@@ -110,29 +104,21 @@ else()
 endif()
 
 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
-set(SIMGRID_VERSION_BANNER "SIMGRID_VERSION_STRING\\nCopyright (c) 2004-${SIMGRID_VERSION_DATE}. The Simgrid Team.")
-if(release)
-  set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nRelease build")
-else()
-  set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nDevelopment build")
-endif()
 
 set(libsimgrid_version "${release_version}")
 set(libsimgrid-java_version "${release_version}")
 
 ### SET THE LIBRARY EXTENSION 
-if(APPLE) #MAC
+if(APPLE)
   set(LIB_EXE "dylib")
+elseif(WIN32)
+  set(LIB_EXE "a")
+  set(BIN_EXE ".exe")
 else()
-  if(WIN32) #WINDOWS
-    set(LIB_EXE "a")
-    set(BIN_EXE ".exe")
-  else() #UNIX
-    set(LIB_EXE "so")
-  endif()
+  set(LIB_EXE "so")
 endif()
 
-exec_program("${CMAKE_LINKER} --version" OUTPUT_VARIABLE "LINKER_VERSION")
+execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION ERROR_VARIABLE LINKER_VERSION)
 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
 
 ### Find programs and paths
@@ -142,64 +128,73 @@ if(NOT PERL_FOUND)
   message(FATAL_ERROR "Please install Perl to compile SimGrid.")
 endif()
 
-if (APPLE)
-  set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
-  set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
+# tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
+set(PythonInterp_FIND_VERSION 3)
+set(PythonInterp_FIND_VERSION_COUNT 1)
+set(PythonInterp_FIND_VERSION_MAJOR 3)
+include(FindPythonInterp)
+if(NOT PYTHONINTERP_FOUND)
+  message(FATAL_ERROR "Please install Python (version 3 or higher) to compile SimGrid.")
 endif()
+
 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
 
 ### Compute the include paths
-set(INCLUDES
+
+# Only include public headers by default
+include_directories(
+   ${CMAKE_BINARY_DIR}/include
+   ${CMAKE_HOME_DIRECTORY}/include
+)
+
+# Compute the ones that should be added when compiling the library
+set(INTERNAL_INCLUDES
+  ${CMAKE_BINARY_DIR}
   ${CMAKE_HOME_DIRECTORY}
-  ${CMAKE_HOME_DIRECTORY}/include
   ${CMAKE_HOME_DIRECTORY}/src/include
-  ${CMAKE_BINARY_DIR}
-  ${CMAKE_BINARY_DIR}/include
   )
 
-if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
-  set(INCLUDES ${INCLUDES} /usr/include/)
+if(enable_smpi)
+  set (INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_HOME_DIRECTORY}/src/smpi/include)
 endif()
 
-### Check 32bits or 64bits
-IF(CMAKE_SIZEOF_VOID_P EQUAL 4)
-  SET(ARCH_32_BITS 1)
-ELSE()
-  SET(ARCH_32_BITS 0)
-ENDIF()
+if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
+  set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} /usr/include/)
+endif()
 
 if(WIN32)
-
   set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
   set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
   string(REGEX REPLACE "/bin/gcc.*" "/include"  CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
   string(REGEX REPLACE "/bin/gcc.*" "/lib"  CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
-  set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
+  set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_INCLUDE_WIN})
   unset(CMAKE_INCLUDE_WIN)
-
 endif()
 
-include_directories(${INCLUDES})
-
-### Setup Options
-include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
+# library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
+set(SIMGRID_DEP "-lm") 
 
 ### Determine the assembly flavor that we need today
+set(HAVE_RAW_CONTEXTS 0)
 include(CMakeDetermineSystem)
 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
-  IF(${ARCH_32_BITS})
+  IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
     message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
-    set(PROCESSOR_i686 1)
+    set(SIMGRID_PROCESSOR_i686 1)
+    set(SIMGRID_PROCESSOR_x86_64 0)
   ELSE()
     message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
-    set(PROCESSOR_x86_64 1)
+    set(SIMGRID_PROCESSOR_i686 0)
+    set(SIMGRID_PROCESSOR_x86_64 1)
   ENDIF()
   if (WIN32)
-    message(STATUS "Disable fast raw contextes on Windows.")
+    message(STATUS "Disable fast raw contexts on Windows.")
   else()
     set(HAVE_RAW_CONTEXTS 1)
   endif()
-
+ELSE()
+  set(SIMGRID_PROCESSOR_i686 0)
+  set(SIMGRID_PROCESSOR_x86_64 0)
 ENDIF()
 
 include(CheckFunctionExists)
@@ -211,17 +206,21 @@ include(CheckSymbolExists)
 
 set(HAVE_GRAPHVIZ 0)
 include(FindGraphviz)
-include(FindLibSigc++)
 
-set(HAVE_LUA 0)
+set(SIMGRID_HAVE_LUA 0)
 if(enable_lua)
   include(FindLuaSimgrid)
 endif()
 
-set(HAVE_NS3 0)
+set(SIMGRID_HAVE_NS3 0)
 if(enable_ns3)
   include(FindNS3)
-  if (NOT HAVE_NS3)
+  if (SIMGRID_HAVE_NS3)
+    set(SIMGRID_HAVE_NS3 1)
+    foreach(lib core csma point-to-point internet network applications)
+      set(SIMGRID_DEP "${SIMGRID_DEP} -lns${NS3_VERSION}-${lib}${NS3_SUFFIX}")
+    endforeach()
+  else()
     message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
   endif()
 endif()
@@ -230,46 +229,62 @@ if(WIN32)
   set(Boost_USE_STATIC_LIBS 1)
 endif()
 
+set(HAVE_PAPI 0)
+if(enable_smpi_papi)
+  include(FindPAPI)
+  if (NOT HAVE_PAPI)
+    message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
+  endif()
+endif()
+
+# But we do need the core of Boost
 find_package(Boost 1.48)
 if(Boost_FOUND)
   include_directories(${Boost_INCLUDE_DIRS})
 else()
   if(APPLE)
-    message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
+    message(FATAL_ERROR "Boost libraries not found. Try to install them with 'sudo fink install boost1.53.nopython' (check the exact name with 'fink list boost') or 'sudo brew install boost'")
   else()
-    message(FATAL_ERROR "Failed to find Boost libraries."
-                        "Did you install libboost-dev and libboost-context-dev?"
-                        "(libboost-context-dev is optional)")
+    message(FATAL_ERROR "Boost libraries not found. Install libboost-dev (>= 1.48.0).")
   endif()
 endif()
 
-# Try again to see if we have libboost-context
-find_package(Boost 1.42 COMPONENTS context)
-set(Boost_FOUND 1) # We don't care of whether this component is missing
+# cmake before 3.13.1 does not know about stacktrace components. Fix it.
+# Usable components: https://www.boost.org/doc/libs/1_65_1/doc/html/stacktrace/configuration_and_build.html
+set(_Boost_STACKTRACE_HEADERS           "boost/stacktrace.hpp")
+set(_Boost_STACKTRACE_BACKTRACE_HEADERS "boost/stacktrace.hpp")
 
-if(Boost_FOUND AND Boost_CONTEXT_FOUND)
-  # We should use feature detection for this instead:
-  if (Boost_VERSION LESS 105600)
-    message("Found Boost.Context API v1")
+if(minimal_java) # When we want a minimal jarfile, don't even search for boost optional components
+  message(STATUS "Don't even look for boost optional components, as we build a minimal jar file")
+else()
+  find_package(Boost 1.59 COMPONENTS context stacktrace_backtrace)
+  set(Boost_FOUND 1) # These components are optionals
+  message(STATUS "Mandatory components found. SimGrid is compilable.")
+  message(STATUS "Looking for optional Boost components:")
+
+  if (Boost_STACKTRACE_BACKTRACE_FOUND)
+    message (STATUS "  stacktrace: found. Activating human-readable stack traces.")
+    set(HAVE_BOOST_STACKTRACE 1)
+    set(SIMGRID_DEP "${SIMGRID_DEP} -lboost_stacktrace_backtrace")
+  else()
+    message (STATUS "  stacktrace: MISSING. Install libboost-stacktrace-dev to display the stacktraces.")
+    set(HAVE_BOOST_STACKTRACE 0)
+  endif()
+
+  if(Boost_CONTEXT_FOUND)
+    message (STATUS "  context: found. Activating Boost contexts.")
     set(HAVE_BOOST_CONTEXTS 1)
   else()
-    message("Found Boost.Context API v2")
-    set(HAVE_BOOST_CONTEXTS 2)
+    message (STATUS "  context: MISSING. Install libboost-context-dev for this optional feature.")
+    set(HAVE_BOOST_CONTEXTS 0)
   endif()
-else()
-  message ("   boost        : found.")
-  message ("   boost-context: missing. Install libboost-context-dev for this optional feature.")
-  set(HAVE_BOOST_CONTEXTS 0)
 endif()
 
+
 # Checks for header libraries functions.
-CHECK_LIBRARY_EXISTS(execinfo backtrace              "" HAVE_BACKTRACE_IN_LIBEXECINFO)
 CHECK_LIBRARY_EXISTS(rt      clock_gettime           "" HAVE_POSIX_GETTIME)
-
-CHECK_LIBRARY_EXISTS(pthread pthread_create          "" HAVE_PTHREAD)
-CHECK_LIBRARY_EXISTS(pthread sem_init                "" HAVE_SEM_INIT_LIB)
-CHECK_LIBRARY_EXISTS(pthread sem_open                "" HAVE_SEM_OPEN_LIB)
 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np  "" HAVE_PTHREAD_SETAFFINITY)
+CHECK_INCLUDE_FILE("pthread_np.h" HAVE_PTHREAD_NP_H) # for pthread_setaffinity_np() on FreeBSD
 
 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
   set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
@@ -281,256 +296,136 @@ else()
   set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
 endif()
 
-CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_VALGRIND_H)
+CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
-CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
 
+CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
-CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
+CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
 
 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
-if(MINGW) 
+if(MINGW)
   # The detection of vasprintf fails on MinGW, assumingly because it's
   # defined as an inline function in stdio.h instead of a regular
   # function. So force the result to be 1 despite of the test.
   set(HAVE_VASPRINTF 1)
 endif()
 
-
-#Check if __thread is defined
-execute_process(
-  COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c"
-  WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-  RESULT_VARIABLE HAVE_thread_storage_run
-  )
-
-if(HAVE_thread_storage_run)
-  set(HAVE_THREAD_LOCAL_STORAGE 1)
+CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
+CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
+if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
+  set(SG_HAVE_SENDFILE 1)
 else()
-  set(HAVE_THREAD_LOCAL_STORAGE 0)
+  set(SG_HAVE_SENDFILE 0)
 endif()
 
-# Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
-IF(HAVE_MMAP AND
-   NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND 
-   NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND 
-   NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND 
-   NOT  "${CMAKE_SYSTEM}" MATCHES "Darwin")
-  SET(HAVE_MMAP 0)
-  message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
-ENDIF()
+if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
+  message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
+  set(enable_model-checking FALSE)
+endif()
 
-if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
+if(HAVE_MMAP)
   SET(HAVE_MMALLOC 1)
 else()
   SET(HAVE_MMALLOC 0)
+  if(enable_model-checking)
+    message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
+  endif()
+  SET(enable_model-checking 0)
 endif()
 
-set(HAVE_UCONTEXT_CONTEXTS 0)
-set(HAVE_THREAD_CONTEXTS 0)
-
 if(enable_jedule)
-  set(HAVE_JEDULE 1)
+  set(SIMGRID_HAVE_JEDULE 1)
+else()
+  set(SIMGRID_HAVE_JEDULE 0)
 endif()
 
 if(enable_mallocators)
-  SET(MALLOCATOR_IS_WANTED 1)
+  SET(SIMGRID_HAVE_MALLOCATOR 1)
 else()
-  SET(MALLOCATOR_IS_WANTED 0)
+  SET(SIMGRID_HAVE_MALLOCATOR 0)
 endif()
 
-if(enable_model-checking AND HAVE_MMALLOC)
-  SET(HAVE_MC 1)
-  SET(MMALLOC_WANT_OVERRIDE_LEGACY 1)
-  include(FindLibunwind)
-  include(FindLibdw)
-else()
+if (minimal_java)
+  message(STATUS "Don't look for libunwind as we build a minimal jar file.")
   if(enable_model-checking)
-    message(STATUS "Warning: support for model-checking has been disabled because HAVE_MMALLOC is false")
+    message(FATAL_ERROR "You cannot enable model-checking and minimal_java at the same time.")
+  endif()
+else()
+  include(FindLibunwind)
+  if(HAVE_LIBUNWIND)
+    SET(SIMGRID_DEP "${SIMGRID_DEP} ${LIBUNWIND_LIBRARIES}")
+  else()
+    if(enable_model-checking)
+      message(FATAL_ERROR "Please install libunwind-dev libdw-dev libelf-dev libevent-dev if you want to compile the SimGrid model checker.")
+    endif()
   endif()
-  SET(HAVE_MC 0)
-  SET(HAVE_MMALLOC 0)
-  SET(MMALLOC_WANT_OVERRIDE_LEGACY 0)
+endif()
+
+if(enable_model-checking)
+  find_package(Libdw REQUIRED)
+  find_package(Libelf REQUIRED)
+  find_package(Libevent REQUIRED)
+  include_directories(${LIBDW_INCLUDE_DIR} ${LIBELF_INCLUDE_DIR} ${LIBEVENT_INCLUDE_DIR})
+  set(SIMGRID_DEP "${SIMGRID_DEP} ${LIBEVENT_LIBRARIES} ${LIBELF_LIBRARIES} ${LIBDW_LIBRARIES}")
+  set(SIMGRID_HAVE_MC 1)
+  if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_java)
+    message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling java")
+    set(enable_java FALSE)
+  endif()
+else()
+  SET(SIMGRID_HAVE_MC 0)  
+  set(HAVE_MMALLOC 0)
+endif()
+mark_as_advanced(PATH_LIBDW_H)
+mark_as_advanced(PATH_LIBDW_LIB)
+
+if (enable_model-checking AND enable_ns3)
+  message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
 endif()
 
 if(enable_smpi)
-  include(FindGFortran)
   SET(HAVE_SMPI 1)
-  if("${CMAKE_SYSTEM}" MATCHES "Linux")
-    SET(USE_LIBUTIL 0)
+  if("${CMAKE_SYSTEM}" MATCHES "Darwin|FreeBSD|Linux")
     SET(HAVE_PRIVATIZATION 1)
-  elseif("${CMAKE_SYSTEM}" MATCHES "^FreeBSD")
-    SET(USE_LIBUTIL 0)
-    SET(HAVE_PRIVATIZATION 0)
   else()
     message (STATUS "Warning:  no support for SMPI automatic privatization on this platform")
     SET(HAVE_PRIVATIZATION 0)
   endif()
+else()
+  SET(HAVE_SMPI 0)
 endif()
 
 #--------------------------------------------------------------------------------------------------
-### Check for GNU dynamic linker
-CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
-if (HAVE_DLFCN_H)
-    execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c -ldl -o test_gnu_ld
-      WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-      OUTPUT_VARIABLE HAVE_GNU_LD_compil
-    )
-    if(HAVE_GNU_LD_compil)
-      set(HAVE_GNU_LD 0)
-      message(STATUS "Warning: test program toward GNU ld failed to compile:")
-      message(STATUS "${HAVE_GNU_LD_comp_output}")
-    else()
-
-      execute_process(COMMAND ./test_gnu_ld
-          WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-          RESULT_VARIABLE HAVE_GNU_LD_run
-          OUTPUT_VARIABLE var_exec
-      )
-
-      if(NOT HAVE_GNU_LD_run)
-        set(HAVE_GNU_LD 1)
-        message(STATUS "We are using GNU dynamic linker")
-      else()
-        set(HAVE_GNU_LD 0)
-        message(STATUS "Warning: error while checking for GNU ld:")
-        message(STATUS "Test output: '${var_exec}'")
-        message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
-      endif()
-      file(REMOVE test_gnu_ld)
-    endif()
-endif()
-
-
-#--------------------------------------------------------------------------------------------------
-### Initialize of CONTEXT THREADS
-
-if(HAVE_PTHREAD)
-  ### Test that we have a way to create semaphores
-
-  if(HAVE_SEM_OPEN_LIB)
-    execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
-    WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-    OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
-    )
-
-    # Test sem_open by compiling:
-    if(HAVE_SEM_OPEN_compil)
-      set(HAVE_SEM_OPEN 0)
-      message(STATUS "Warning: sem_open not compilable")
-      message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
-    else()
-      set(HAVE_SEM_OPEN 1)
-      message(STATUS "sem_open is compilable")
-    endif()
-
-    # If we're not crosscompiling, we check by executing the program:
-    if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
-      execute_process(COMMAND ./sem_open
-      WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-      RESULT_VARIABLE HAVE_SEM_OPEN_run
-      OUTPUT_VARIABLE var_compil
-      )
-      if (NOT HAVE_SEM_OPEN_run)
-        set(HAVE_SEM_OPEN 1)
-        message(STATUS "sem_open is executable")
-      else()
-        set(HAVE_SEM_OPEN 0)
-        if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
-          message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
-        else()
-          message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
-        endif()
-        message(STATUS "Warning: sem_open not executable")
-        message(STATUS "Compilation output: '${var_compil}'")
-        message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
-      endif()
-    endif()
-    file(REMOVE sem_open)
-
-  else()
-    set(HAVE_SEM_OPEN 0)
-  endif()
-
-  if(HAVE_SEM_INIT_LIB)
-    execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
-    WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-    RESULT_VARIABLE HAVE_SEM_INIT_run OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
-
-    # Test sem_init by compiling:
-    if(HAVE_SEM_INIT_compil)
-      set(HAVE_SEM_INIT 0)
-      message(STATUS "Warning: sem_init not compilable")
-      message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
-    else()
-      set(HAVE_SEM_INIT 1)
-      message(STATUS "sem_init is compilable")
-    endif()
-
-    # If we're not crosscompiling, we check by executing the program:
-    if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
-      execute_process(COMMAND ./sem_init
-      WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-      RESULT_VARIABLE HAVE_SEM_INIT_run
-      OUTPUT_VARIABLE var_compil
-      )
-      if (NOT HAVE_SEM_INIT_run)
-        set(HAVE_SEM_INIT 1)
-        message(STATUS "sem_init is executable")
-      else()
-        set(HAVE_SEM_INIT 0)
-        if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
-          message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
-        else()
-          message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
-        endif()
-        message(STATUS "Warning: sem_init not executable")
-        message(STATUS "Compilation output: '${var_compil}'")
-        message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
-      endif()
-    endif()
-    file(REMOVE sem_init)
-  endif()
-
-  if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
-    message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
-  endif()
-
-endif()
-
-if(HAVE_PTHREAD)
-  set(HAVE_THREAD_CONTEXTS 1)
-  message("-- Support for thread context factory ok.")
-endif()
-
+### Check what context backends are available
 
+set(HAVE_UCONTEXT_CONTEXTS 0)
 if(NOT HAVE_UCONTEXT_H)
-  message("-- No ucontext factory: <ucontext.h> not found.")
+  message(STATUS "No ucontext factory: <ucontext.h> not found.")
+elseif(APPLE)
+  message(STATUS "No ucontext factory: Apple don't want us to use them.")
+  set(HAVE_UCONTEXT_H 0)
 else()
-  # This is needed for ucontext on MacOS X:
-  if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
-    add_definitions(-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE)
-  endif()
   try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
     OUTPUT_VARIABLE compile_makecontext_output)
-  
+
   #If can have both context
   if(compile_makecontext)
     set(HAVE_UCONTEXT_CONTEXTS 1)
-    message("-- Support for ucontext factory ok.")
+    message(STATUS "Support for ucontext factory ok.")
   else()
-    message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
-    message("-- No ucontext factory: makecontext() is not compilable.")
+    message(STATUS "Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
+    message(STATUS "No ucontext factory: makecontext() is not compilable.")
   endif()
 
   # Stack setup (size and address)
@@ -547,101 +442,80 @@ else()
   else()
     message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
   endif()
-  
-  # Stack growth direction (upward or downward)
-  try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
-    ${CMAKE_BINARY_DIR}
-    ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
-    RUN_OUTPUT_VARIABLE stack
-    COPY_FILE test_stackgrowth)
-
-  if("${stack}" STREQUAL "down")
+endif()
+
+# Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
+try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
+  ${CMAKE_BINARY_DIR}
+  ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
+  RUN_OUTPUT_VARIABLE stack
+  COPY_FILE test_stackgrowth)
+
+if("${stack}" STREQUAL "down")
+  set(PTH_STACKGROWTH "-1")
+elseif("${stack}" STREQUAL "up")
+  set(PTH_STACKGROWTH "1")
+else()
+  if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
+    set(PTH_STACKGROWTH "-1")
+  elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
     set(PTH_STACKGROWTH "-1")
-  elseif("${stack}" STREQUAL "up")
-    set(PTH_STACKGROWTH "1")
   else()
-    if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
-      set(PTH_STACKGROWTH "-1")
-    elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
-      set(PTH_STACKGROWTH "-1")
-    else()
-      message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
-    endif()
+    message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
   endif()
-  # If the test ran well, remove the test binary
-  execute_process(COMMAND ${CMAKE_COMMAND} -E remove test_stackgrowth)
 endif()
+# If the test ran well, remove the test binary
+file(REMOVE test_stackgrowth)
 #--------------------------------------------------------------------------------------------------
 
-### check for addr2line
-find_path(ADDR2LINE NAMES addr2line	PATHS NO_DEFAULT_PATHS)
-if(ADDR2LINE)
-  set(ADDR2LINE "${ADDR2LINE}/addr2line")
-endif()
-
 ###############
 ## GIT version check
 ##
 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
-  execute_process(COMMAND git remote
-  COMMAND head -n 1
-  WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
-  OUTPUT_VARIABLE remote
-  RESULT_VARIABLE ret
-  )
-  string(REPLACE "\n" "" remote "${remote}")
-  #message(STATUS "Git remote: ${remote}")
-  execute_process(COMMAND git config --get remote.${remote}.url
-  WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
-  OUTPUT_VARIABLE url
-  RESULT_VARIABLE ret
-  )
-  string(REPLACE "\n" "" url "${url}")
-  #message(STATUS "Git url: ${url}")
-  if(url)
-    execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
-    WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
-    OUTPUT_VARIABLE GIT_VERSION
-    RESULT_VARIABLE ret
-    )
-    string(REPLACE "\n" "" GIT_VERSION "${GIT_VERSION}")
-    message(STATUS "Git version: ${GIT_VERSION}")
-    execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
-    WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
-    OUTPUT_VARIABLE GIT_DATE
-    RESULT_VARIABLE ret
-    )
-    string(REPLACE "\n" "" GIT_DATE "${GIT_DATE}")
-    message(STATUS "Git date: ${GIT_DATE}")
-    string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
-    
-    execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
-                    WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
-		    OUTPUT_VARIABLE SIMGRID_GITHASH
-		    RESULT_VARIABLE ret
-		    )
-    string(REPLACE "\n" "" SIMGRID_GITHASH "${SIMGRID_GITHASH}")
-		    
+  execute_process(COMMAND git rev-parse --verify --short HEAD
+     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}
+     OUTPUT_VARIABLE GIT_VERSION
+     OUTPUT_STRIP_TRAILING_WHITESPACE)
+  # Check for uncommitted changes
+  execute_process(COMMAND git diff --name-only HEAD
+    WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}
+    OUTPUT_VARIABLE files_changed)
+  if(files_changed)
+    set(GIT_VERSION "${GIT_VERSION}-dirty")
   endif()
 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
   FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
+else()
+  set(GIT_VERSION "none, release version")
 endif()
+message(STATUS "Git version: ${GIT_VERSION}")
 
-if(GIT_VERSION)
-  set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} at commit ${GIT_VERSION}")
-endif()
-if(GIT_DATE)
-  set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} (${GIT_DATE})")
+### Define source packages for Libs
+include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
+
+### Setup gcc & clang flags (include after DefinePackage.cmake, and before generating header files)
+if (NOT MSVC)
+  include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Flags.cmake)
 endif()
 
 ### Generate the required headers and scripts
 #############################################
-configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h"    @ONLY IMMEDIATE)
-configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in"          "${CMAKE_BINARY_DIR}/include/simgrid_config.h" @ONLY IMMEDIATE)
+
+# Avoid triggering a (full) rebuild by touching the files if they did not really change
+configure_file("${CMAKE_HOME_DIRECTORY}/src/internal_config.h.in"    "${CMAKE_BINARY_DIR}/src/internal_config.h.generated"    @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/src/simgrid/version.h.in"    "${CMAKE_BINARY_DIR}/src/simgrid/version.h.generated" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid/config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated" @ONLY IMMEDIATE)
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/simgrid/version.h.generated ${CMAKE_BINARY_DIR}/src/simgrid/version.h)
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid/config.h)
+file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
+file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated)
+file(REMOVE ${CMAKE_BINARY_DIR}/src/simgrid/version.h.generated)
 
 # We need two versions of the SMPI scripts because they contain the path to the library
 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
-file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all scripts, inlined in each of them
+
+file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
 
 ### SMPI script used when simgrid is installed
 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
@@ -653,8 +527,20 @@ if(NS3_LIBRARY_PATH)
   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 endif()
 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
+set(SMPIMAIN ${libdir}/simgrid/smpimain)
+set(SMPIREPLAYMAIN ${libdir}/simgrid/smpireplaymain)
 
 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
+#configure mpif.f90 to build mpi.mod
+if(SMPI_FORTRAN)
+  set(MODULE_MPIF_IN "module mpi")
+  set(MODULE_MPIF_OUT "end module mpi")
+  configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated @ONLY)
+  execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+  set(CMAKE_Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/include/smpi)
+  add_library(mpi SHARED ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+endif()
+
 foreach(script cc cxx ff f90 run)
   configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
 endforeach()
@@ -670,6 +556,8 @@ if(NS3_LIBRARY_PATH)
   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 endif()
 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
+set(SMPIMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpimain)
+set(SMPIREPLAYMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpireplaymain)
 
 foreach(script cc cxx ff f90 run)
   configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
@@ -684,12 +572,10 @@ endif()
 
 set(generated_headers_to_install
   ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
-  ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
+  ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h
   )
 
-set(generated_headers
-  ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h
-  )
+set(generated_headers  ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
 
 set(generated_files_to_clean
   ${generated_headers}
@@ -707,7 +593,7 @@ set(generated_files_to_clean
 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
-  configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
+  configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allreduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
@@ -718,7 +604,9 @@ if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
-  
+  configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_cluster ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_cluster COPYONLY)
+  configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_coll ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_coll COPYONLY)
+
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
@@ -755,11 +643,27 @@ if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
 
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources COPYONLY)
+
   set(generated_files_to_clean
     ${generated_files_to_clean}
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
-    ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
@@ -805,23 +709,41 @@ if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/replay_multiple_manual.tesh
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty1
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time_and_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed1
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_nojob
     )
 endif()
 
 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
   "${generated_files_to_clean}")
 
-### Define source packages for Libs
-include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
+add_custom_target(tests COMMENT "Recompiling the tests")
 
 ### Build some Maintainer files
 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
-include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
-
-### Setup gcc & clang flags
-if (NOT MSVC)
-  include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
-endif()
 
 ### Make Libs
 if(NOT WIN32)
@@ -834,6 +756,64 @@ if(enable_java)
   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
 endif()
 
+# Python binding (with pybind11)
+################
+# Our usage of pybind11::overload_cast mandates C++14
+get_property(known_features GLOBAL PROPERTY CMAKE_CXX_KNOWN_FEATURES)
+
+if("cxx_std_14" IN_LIST known_features)
+
+  if(EXISTS ${CMAKE_HOME_DIRECTORY}/pybind11) # Try to use a local copy of pybind11, if any
+    message(STATUS "Use the internal copy of pybind11 (using C++14).")
+    add_subdirectory(${CMAKE_HOME_DIRECTORY}/pybind11)
+    set(pybind11_FOUND ON)
+    
+    set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/pybind11/tools/)
+    set(Python_ADDITIONAL_VERSIONS 3.7 3.6 3.5 3.4)
+    find_package(PythonLibsNew ${PYBIND11_PYTHON_VERSION} REQUIRED)
+    
+  else()
+    find_package(pybind11 2.2.0)
+  endif()
+  
+  if(NOT PYTHONLIBS_FOUND)
+    message(STATUS "Python libs not found. Turn pybind11 off.")
+
+    set(pybind11_FOUND OFF)
+  endif()
+  
+else()
+  message(STATUS "No support for C++14 detected, don't even search for pybind11.")
+  set(pybind11_FOUND OFF)
+endif()
+unset(known_features)
+
+option(enable_python "Whether the Python bindings are activated." ${pybind11_FOUND}) # ON by default if dependencies are met
+
+if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_model-checking AND enable_python)
+  message(WARNING "FreeBSD + Model-Checking + Python = too much for now. Disabling python.")
+  set(enable_python FALSE)
+endif()
+
+if(enable_python)
+  if(pybind11_FOUND)
+    message(STATUS "Found pybind11, with C++14.")
+    pybind11_add_module(python-bindings src/bindings/python/simgrid_python.cpp)
+    target_compile_features(python-bindings PRIVATE cxx_std_14)
+    target_link_libraries(python-bindings PUBLIC simgrid)
+    set_target_properties(python-bindings PROPERTIES
+                          LIBRARY_OUTPUT_NAME simgrid
+                          CXX_VISIBILITY_PRESET "default")
+    add_dependencies(tests python-bindings)
+    set_property(TARGET python-bindings
+                 APPEND PROPERTY INCLUDE_DIRECTORIES "${INTERNAL_INCLUDES}")
+  else()
+    message(FATAL_ERROR "Please install pybind11-dev to build the Python bindings (or disable that option).")
+  endif()
+endif()
+mark_as_advanced(PYBIND11_PYTHON_VERSION)
+mark_as_advanced(pybind11_DIR)
+
 ### Make tests
 if(enable_memcheck_xml)
   set(enable_memcheck true)
@@ -853,32 +833,29 @@ endforeach()
 ### Setup the distrib
 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
 
-### Build the doc (Windows downloads the doc instead of regenerating)
-#
-if(NOT WIN32)
-  include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
-else()
-  find_program(WGET_PROGRAM  NAMES wget)
-  message(STATUS "wget: ${WGET_PROGRAM}")
-  if(WGET_PROGRAM)
-    ADD_CUSTOM_TARGET(documentation
-      COMMENT "Downloading the SimGrid documentation..."
-      COMMAND ${WGET_PROGRAM} -r -np -nH -nd http://simgrid.gforge.inria.fr/simgrid/${release_version}/doc/
-      WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/doc/html
-    )
-  endif()
-endif()
+### Build the docs if asked to
+include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
 
 ### Print the result of configuration
 message("")
 message("##########################################")
 message("#### Content of src/internal_config.h ####")
+message("##########################################")
 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
-LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8) # Pass the file header
+LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
 foreach(line ${config_output})
   message("   ${line}")
 endforeach()
-message("####   end of src/internal_config.h   ####")
+message("##########################################")
+message("####   Content of simgrid/config.h    ####")
+message("##########################################")
+file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h config_output)
+LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
+foreach(line ${config_output})
+  message("   ${line}")
+endforeach()
+message("##########################################")
+message("####   End of configuration headers   ####")
 message("##########################################")
 
 message("\nConfiguration of package `simgrid':")
@@ -901,14 +878,10 @@ message("                version .............: ${CMAKE_CXX_COMPILER_VERSION}")
 if(${Java_FOUND})
   message("        Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
   message("                version .............: ${Java_VERSION_STRING}")
-if(${SWIG_FOUND})
-  message("                SWIG ................: Version ${SWIG_VERSION} found.")
-else()
-  message("                SWIG ................: Missing.")
-endif()
+  message("                runtime .............: ${Java_JAVA_EXECUTABLE}")
 endif()
 if(CMAKE_Fortran_COMPILER)
-  message("        Compiler: Fortran ...........: ${CMAKE_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
+  message("        Compiler: Fortran ...........: ${SMPI_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
   message("                version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
 endif()
 message("        Linker: .....................: ${CMAKE_LINKER}")
@@ -921,7 +894,7 @@ message("        LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
 message("        with LTO ....................: ${enable_lto}")
 message("")
 
-if (HAVE_NS3)
+if (SIMGRID_HAVE_NS3)
   message("        Compile NS-3 ................: yes (path: ${NS3_PATH})")
 else()
   message("        Compile NS-3 ................: NO  (hint: ${NS3_HINT})")
@@ -933,25 +906,31 @@ if (${Java_FOUND})
 else()
   message("        Compile Java ................: NO")
 endif()
-message("        Compile Lua .................: ${HAVE_LUA}")
+if(pybind11_FOUND)
+  message("        Compile Python bindings .....: ${enable_python}")
+  message("          module ....................: ${PYTHON_MODULE_PREFIX}simgrid${PYTHON_MODULE_EXTENSION}")
+else()
+  message("        Compile Python bindings .....: NO (disabled, or pybind11 not found)")
+endif()
+message("        Compile Lua .................: ${SIMGRID_HAVE_LUA}")
 message("        Compile Smpi ................: ${HAVE_SMPI}")
 message("          Smpi fortran ..............: ${SMPI_FORTRAN}")
 message("          MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
 message("          Privatization .............: ${HAVE_PRIVATIZATION}")
+message("          PAPI support...............: ${HAVE_PAPI}")
 message("        Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
 message("")
 message("        Maintainer mode .............: ${enable_maintainer_mode}")
 message("        Documentation................: ${enable_documentation}")
-message("        Model checking ..............: ${HAVE_MC}")
-message("        Jedule  mode ................: ${HAVE_JEDULE}")
+message("        Model checking ..............: ${SIMGRID_HAVE_MC}")
+message("        Jedule  mode ................: ${SIMGRID_HAVE_JEDULE}")
 message("        Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
-message("        Sigc++ mode .................: ${SIMGRID_HAVE_LIBSIG}")
 message("        Mallocators .................: ${enable_mallocators}")
 message("")
 message("        Simgrid dependencies ........: ${SIMGRID_DEP}")
 message("")
 
-exec_program("${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/" OUTPUT_VARIABLE OKIDOKI)
+execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build  "GIT version : ${GIT_VERSION}\n")
 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release     : simgrid-${release_version}\n")