X-Git-Url: http://info.iut-bm.univ-fcomte.fr/pub/gitweb/simgrid.git/blobdiff_plain/0821eaf865ee5431f938481ede3c2e77ef095f65..bad9b85e4bc09f01cbdafbba389438f4daeead81:/doc/Doxyfile.in diff --git a/doc/Doxyfile.in b/doc/Doxyfile.in index a23b712752..cab5267a15 100644 --- a/doc/Doxyfile.in +++ b/doc/Doxyfile.in @@ -1,7 +1,7 @@ # @WARNING@ -# Doxyfile 1.7.4 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -25,8 +25,9 @@ DOXYFILE_ENCODING = UTF-8 -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need +# to put quotes around the project name if it contains spaces. PROJECT_NAME = SimGrid @@ -197,6 +198,13 @@ TAB_SIZE = 8 ALIASES = +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding +# "class=itcl::class" will allow you to use the command class in the +# itcl::class meaning. + +TCL_SUBST = + # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C # sources only. Doxygen will then generate output that is more tailored for C. # For instance, some of the names that are used will be different. The list @@ -235,6 +243,15 @@ OPTIMIZE_OUTPUT_VHDL = NO EXTENSION_MAPPING = +# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all +# comments according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you +# can mix doxygen, HTML, and XML commands with Markdown formatting. +# Disable only in case of backward compatibilities issues. + +MARKDOWN_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -284,7 +301,16 @@ SUBGROUPING = YES # @ingroup) instead of on a separate page (for HTML and Man pages) or # section (for LaTeX and RTF). -#INLINE_GROUPED_CLASSES = NO +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields will be shown inline in the documentation +# of the scope in which they are defined (i.e. file, namespace, or group +# documentation), provided this scope is documented. If set to NO (the default), +# structs, classes, and unions are shown on a separate page (for HTML and Man +# pages) or section (for LaTeX and RTF). + +INLINE_SIMPLE_STRUCTS = NO # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum # is documented as struct, union, or enum with the name of the typedef. So @@ -308,10 +334,21 @@ TYPEDEF_HIDES_STRUCT = NO # a logarithmic scale so increasing the size by one will roughly double the # memory usage. The cache size is given by this formula: # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols +# corresponding to a cache size of 2^16 = 65536 symbols. SYMBOL_CACHE_SIZE = 0 +# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be +# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given +# their name and scope. Since this can be an expensive process and often the +# same symbol appear multiple times in the code, doxygen keeps a cache of +# pre-resolved symbols. If the cache is too small doxygen will become slower. +# If the cache is too large, memory is wasted. The cache size is given by this +# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +LOOKUP_CACHE_SIZE = 0 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -328,6 +365,10 @@ EXTRACT_ALL = NO EXTRACT_PRIVATE = NO +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. + +EXTRACT_PACKAGE = NO + # If the EXTRACT_STATIC tag is set to YES all static members of a file # will be included in the documentation. @@ -515,12 +556,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = NO - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -551,7 +586,17 @@ FILE_VERSION_FILTER = # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. -LAYOUT_FILE = +LAYOUT_FILE = SimgridDoxygenLayout.xml + +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this +# feature you need bibtex and perl available in the search path. + +CITE_BIB_FILES = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages @@ -613,95 +658,8 @@ WARN_LOGFILE = # directories like "/usr/src/myproject". Separate the files or directories # with spaces. -INPUT = index.doc \ - FAQ.doc \ - install.doc \ - bindings.doc \ - options.doc \ - tracing.doc \ - use.doc \ - pls.doc \ - ./index-API.doc \ - modules.doc \ - module-xbt.doc \ - module-msg.doc \ - module-gras.doc \ - module-amok.doc \ - module-sd.doc \ - module-surf.doc \ - gtut-main.doc \ - gtut-introduction.doc \ - gtut-tour.doc \ - gtut-tour-00-install.doc \ - gtut-tour-01-bones.doc \ - gtut-tour-02-simple.doc \ - gtut-tour-03-args.doc \ - gtut-tour-04-callback.doc \ - gtut-tour-05-globals.doc \ - gtut-tour-06-logs.doc \ - gtut-tour-07-timers.doc \ - gtut-tour-08-exceptions.doc \ - gtut-tour-09-simpledata.doc \ - gtut-tour-10-rpc.doc \ - gtut-tour-11-explicitwait.doc \ - gtut-tour-recap-messages.doc \ - gtut-tour-12-staticstruct.doc \ - gtut-tour-13-pointers.doc \ - gtut-tour-14-dynar.doc \ - gtut-tour-15-manualdatadef.doc \ - gtut-tour-16-exchangecb.doc \ - gtut-howto.doc \ - gtut-howto-design.doc \ - @top_srcdir@/include/ \ - @top_srcdir@/include/msg \ - @top_srcdir@/include/gras \ - @top_srcdir@/include/amok \ - @top_srcdir@/include/xbt \ - @top_srcdir@/include/simdag \ - @top_srcdir@/src/include/surf \ - @top_srcdir@/src/xbt/ \ - @top_srcdir@/src/xbt/datadesc \ - @top_srcdir@/src/surf/ \ - @top_srcdir@/src/msg/ \ - @top_srcdir@/src/gras \ - @top_srcdir@/src/gras/Msg \ - @top_srcdir@/src/gras/Transport \ - @top_srcdir@/src/gras/Virtu \ - @top_srcdir@/src/amok \ - @top_srcdir@/src/amok/Bandwidth \ - @top_srcdir@/src/amok/PeerManagement \ - @top_srcdir@/src/simdag - -################################################### -## PLEASE DON'T MESS WITH THE ORDER OF EXAMPLES ## (unless you know what you are doing, of course) -################################################### - -INPUT += @top_srcdir@/examples/msg/sendrecv/sendrecv.c \ - @top_srcdir@/examples/msg/masterslave/masterslave_forwarder.c \ - @top_srcdir@/examples/msg/masterslave/masterslave_console.c \ - @top_srcdir@/examples/msg/migration \ - @top_srcdir@/examples/msg/suspend \ - @top_srcdir@/examples/msg/properties \ - @top_srcdir@/examples/msg/parallel_task \ - @top_srcdir@/examples/msg/priority \ - @top_srcdir@/examples/msg/icomms/peer.c \ - @top_srcdir@/examples/msg/icomms/peer2.c \ - @top_srcdir@/examples/msg/icomms/peer3.c \ - @top_srcdir@/examples/msg/tracing/simple.c \ - @top_srcdir@/examples/msg/tracing/ms.c \ - @top_srcdir@/examples/msg/tracing/categories.c \ - @top_srcdir@/examples/msg/tracing/procmig.c \ - @top_srcdir@/examples/msg/tracing/trace_platform.c \ - @top_srcdir@/examples/msg/tracing/user_variables.c \ - @top_srcdir@/examples/msg/ns3 \ - @top_srcdir@/examples/msg/gtnets \ - @top_srcdir@/examples/msg/io \ - @top_srcdir@/examples/msg/gpu \ - @top_srcdir@/examples/msg/actions \ - @top_srcdir@/examples/msg/token_ring \ - @top_srcdir@/examples/msg/pmm \ - @top_srcdir@/examples/msg/chord \ - +INPUT = index.doc + # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is # also the default input encoding. Doxygen uses libiconv (or the iconv built @@ -726,13 +684,15 @@ FILE_PATTERNS = RECURSIVE = NO -# The EXCLUDE tag can be used to specify files and/or directories that should +# The EXCLUDE tag can be used to specify files and/or directories that should be # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to the directory from which doxygen is +# run. EXCLUDE = -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded # from the input. @@ -924,12 +884,13 @@ HTML_FILE_EXTENSION = .html # The HTML_HEADER tag can be used to specify a personal HTML header for # each generated HTML page. If it is left blank doxygen will generate a # standard header. Note that when using a custom header you are responsible -# for the proper inclusion of any scripts and style sheets that doxygen +# for the proper inclusion of any scripts and style sheets that doxygen # needs, which is dependent on the configuration options used. -# It is adviced to generate a default header using "doxygen -w html +# It is advised to generate a default header using "doxygen -w html # header.html footer.html stylesheet.css YourConfigFile" and then modify # that header. Note that the header is subject to change so you typically -# have to redo this when upgrading to a newer version of doxygen or when changing the value of configuration settings such as GENERATE_TREEVIEW! +# have to redo this when upgrading to a newer version of doxygen or when +# changing the value of configuration settings such as GENERATE_TREEVIEW! HTML_HEADER = @@ -937,14 +898,14 @@ HTML_HEADER = # each generated HTML page. If it is left blank doxygen will generate a # standard footer. -HTML_FOOTER = footer.html +HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to # fine-tune the look of the HTML output. If the tag is left blank doxygen # will generate a default style sheet. Note that doxygen will try to copy # the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! +# style sheet in the HTML output directory as well, or it will be erased! HTML_STYLESHEET = @@ -955,10 +916,10 @@ HTML_STYLESHEET = # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. -#HTML_EXTRA_FILES = +HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the stylesheet and background images +# Doxygen will adjust the colors in the style sheet and background images # according to this color. Hue is specified as an angle on a colorwheel, # see http://en.wikipedia.org/wiki/Hue for more information. # For instance the value 0 represents red, 60 is yellow, 120 is green, @@ -988,20 +949,23 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = YES -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = NO +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1153,19 +1117,14 @@ GENERATE_ECLIPSEHELP = NO ECLIPSE_DOC_ID = org.doxygen.Project -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. +# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) +# at top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. Since the tabs have the same information as the +# navigation tree you can set this option to NO if you already set +# GENERATE_TREEVIEW to YES. DISABLE_INDEX = NO -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values -# (range [0,1..20]) that doxygen will group on one line in the generated HTML -# documentation. Note that a value of 0 will completely suppress the enum -# values from appearing in the overview section. - -ENUM_VALUES_PER_LINE = 4 - # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. # If the tag value is set to YES, a side panel will be generated @@ -1173,13 +1132,17 @@ ENUM_VALUES_PER_LINE = 4 # is generated for HTML Help). For this to work a browser that supports # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). # Windows users are probably better off using the HTML help feature. +# Since the tree basically has the same information as the tab index you +# could consider to set DISABLE_INDEX to NO when enabling this option. GENERATE_TREEVIEW = NO -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum +# values from appearing in the overview section. -USE_INLINE_TREES = NO +ENUM_VALUES_PER_LINE = 4 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree @@ -1212,7 +1175,7 @@ FORMULA_TRANSPARENT = YES # (see http://www.mathjax.org) which uses client side Javascript for the # rendering instead of using prerendered bitmaps. Use this if you do not # have LaTeX installed or if you want to formulas look prettier in the HTML -# output. When enabled you also need to install MathJax separately and +# output. When enabled you may also need to install MathJax separately and # configure the path to it using the MATHJAX_RELPATH option. USE_MATHJAX = NO @@ -1221,13 +1184,19 @@ USE_MATHJAX = NO # HTML output directory using the MATHJAX_RELPATH option. The destination # directory should contain the MathJax.js script. For instance, if the mathjax # directory is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to the -# mathjax.org site, so you can quickly see the result without installing -# MathJax, but it is strongly recommended to install a local copy of MathJax -# before deployment. +# MATHJAX_RELPATH should be ../mathjax. The default value points to +# the MathJax Content Delivery Network so you can quickly see the result without +# installing MathJax. +# However, it is strongly recommended to install a local +# copy of MathJax from http://www.mathjax.org before deployment. MATHJAX_RELPATH = http://www.mathjax.org/mathjax +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# names that should be enabled during MathJax rendering. + +MATHJAX_EXTENSIONS = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1281,7 +1250,7 @@ MAKEINDEX_CMD_NAME = makeindex # LaTeX documents. This may be useful for small projects and may help to # save some trees in general. -COMPACT_LATEX = NO +COMPACT_LATEX = YES # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and @@ -1292,7 +1261,7 @@ PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # packages that should be included in the LaTeX output. -EXTRA_PACKAGES = +EXTRA_PACKAGES = pdfpages # The LATEX_HEADER tag can be used to specify a personal LaTeX header for # the generated latex document. The header should contain everything until @@ -1306,7 +1275,7 @@ LATEX_HEADER = # the last chapter. If it is left blank doxygen will generate a # standard footer. Notice: only use this tag if you know what you are doing! -#LATEX_FOOTER = +LATEX_FOOTER = # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will @@ -1341,6 +1310,12 @@ LATEX_HIDE_INDICES = NO LATEX_SOURCE_CODE = NO +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# http://en.wikipedia.org/wiki/BibTeX for more info. + +LATEX_BIB_STYLE = plain + #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1372,7 +1347,7 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's +# Load style sheet definitions from file. Syntax is similar to doxygen's # config file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. @@ -1545,7 +1520,9 @@ INCLUDE_FILE_PATTERNS = PREDEFINED = DOXYGEN \ DOXYGEN_SKIP_IT \ XBT_PUBLIC= \ - XBT_INLINE= + XBT_INLINE= \ + HAVE_TRACING \ + MSG_USE_DEPRECATED # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. @@ -1566,22 +1543,18 @@ SKIP_FUNCTION_MACROS = YES # Configuration::additions related to external references #--------------------------------------------------------------------------- -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: +# The TAGFILES option can be used to specify one or more tagfiles. For each +# tag file the location of the external documentation should be added. The +# format of a tag file without this location is as follows: # # TAGFILES = file1 file2 ... # Adding location for the tag files is done as follows: # # TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. +# where "loc1" and "loc2" can be relative or absolute paths +# or URLs. Note that each tag file must have a unique name (where the name does +# NOT include the path). If a tag file is not located in the directory in which +# doxygen is run, you must also specify the path to the tagfile here. TAGFILES = @@ -1649,13 +1622,12 @@ HAVE_DOT = NO DOT_NUM_THREADS = 0 -# By default doxygen will write a font called Helvetica to the output -# directory and reference it in all dot files that doxygen generates. -# When you want a differently looking font you can specify the font name -# using DOT_FONTNAME. You need to make sure dot is able to find the font, -# which can be done by putting it in a standard location or by setting the -# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory -# containing the font. +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. DOT_FONTNAME = Helvetica @@ -1664,17 +1636,16 @@ DOT_FONTNAME = Helvetica DOT_FONTSIZE = 10 -# By default doxygen will tell dot to use the output directory to look for the -# FreeSans.ttf font (which doxygen will put there itself). If you specify a -# different font using DOT_FONTNAME you can set the path where dot -# can find it using this tag. +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# set the path where dot can find it. DOT_FONTPATH = # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # will generate a graph for each documented class showing the direct and # indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. +# CLASS_DIAGRAMS tag to NO. CLASS_GRAPH = YES @@ -1696,6 +1667,15 @@ GROUP_GRAPHS = YES UML_LOOK = NO +# If the UML_LOOK tag is enabled, the fields and methods are shown inside +# the class node. If there are many fields or methods and many nodes the +# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS +# threshold limits the number of items for each type to make the size more +# managable. Set this to 0 for no limit. Note that the threshold may be +# exceeded by 50% before the limit is enforced. + +UML_LIMIT_NUM_FIELDS = 10 + # If set to YES, the inheritance and collaboration graphs will show the # relations between templates and their instances. @@ -1713,7 +1693,7 @@ INCLUDE_GRAPH = YES # documented header file showing the documented files that directly or # indirectly include this file. -INCLUDED_BY_GRAPH = YES +INCLUDED_BY_GRAPH = NO # If the CALL_GRAPH and HAVE_DOT options are set to YES then # doxygen will generate a call dependency graph for every global function @@ -1729,14 +1709,14 @@ CALL_GRAPH = NO # the time of a run. So in most cases it will be better to enable caller # graphs for selected functions only using the \callergraph command. -CALLER_GRAPH = NO +CALLER_GRAPH = YES # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will generate a graphical hierarchy of all classes instead of a textual one. GRAPHICAL_HIERARCHY = YES -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. @@ -1745,10 +1725,21 @@ DIRECTORY_GRAPH = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. Possible values are svg, png, jpg, or gif. -# If left blank png will be used. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible in IE 9+ (other browsers do not have this requirement). DOT_IMAGE_FORMAT = png +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible. Older versions of IE do not have SVG support. + +INTERACTIVE_SVG = NO + # The tag DOT_PATH can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found in the path.