The full list can be retrieved by passing ``--help`` and
``--help-cfg`` to an executable that uses SimGrid. Try passing
``help`` as a value to get the list of values accepted by a given
- option. For example, ``--cfg=plugin:help`` will give you the list
- of plugins available in your installation of SimGrid.
-
-- **clean-atexit:** :ref:`cfg=clean-atexit`
+ option. For example, ``--cfg=plugin:help`` will give you the list
+ of plugins available in your installation of SimGrid.
- **contexts/factory:** :ref:`cfg=contexts/factory`
- **contexts/guard-size:** :ref:`cfg=contexts/guard-size`
- **cpu/model:** :ref:`options_model_select`
- **cpu/optim:** :ref:`Cpu Optimization Level <options_model_optim>`
+- **debug/breakpoint:** :ref:`cfg=debug/breakpoint`
+- **debug/clean-atexit:** :ref:`cfg=debug/clean-atexit`
+- **debug/verbose-exit:** :ref:`cfg=debug/verbose-exit`
+
- **exception/cutpath:** :ref:`cfg=exception/cutpath`
- **host/model:** :ref:`options_model_select`
- **model-check/checkpoint:** :ref:`cfg=model-check/checkpoint`
- **model-check/communications-determinism:** :ref:`cfg=model-check/communications-determinism`
- **model-check/dot-output:** :ref:`cfg=model-check/dot-output`
-- **model-check/hash:** :ref:`cfg=model-checker/hash`
- **model-check/max-depth:** :ref:`cfg=model-check/max-depth`
- **model-check/property:** :ref:`cfg=model-check/property`
- **model-check/reduction:** :ref:`cfg=model-check/reduction`
- **path:** :ref:`cfg=path`
- **plugin:** :ref:`cfg=plugin`
-- **simix/breakpoint:** :ref:`cfg=simix/breakpoint`
-
- **storage/max_file_descriptors:** :ref:`cfg=storage/max_file_descriptors`
- **surf/precision:** :ref:`cfg=surf/precision`
- **Tracing configuration options** can be found in Section :ref:`tracing_tracing_options`
- **storage/model:** :ref:`options_model_select`
-- **verbose-exit:** :ref:`cfg=verbose-exit`
- **vm/model:** :ref:`options_model_select`
poorly modeled. This model is described in `A Network Model for
Simulation of Grid Application
<https://hal.inria.fr/inria-00071989/document>`_.
- - **Reno/Reno2/Vegas:** Models from Steven H. Low using lagrange_solve instead of
- lmm_solve (experts only; check the code for more info).
- - **NS3** (only available if you compiled SimGrid accordingly):
+ - **ns-3** (only available if you compiled SimGrid accordingly):
Use the packet-level network
- simulators as network models (see :ref:`pls_ns3`).
+ simulators as network models (see :ref:`model_ns3`).
This model can be :ref:`further configured <options_pls>`.
- ``cpu/model``: specify the used CPU model. We have only one model
.. _options_pls:
-Configuring NS3
-^^^^^^^^^^^^^^^
+Configuring ns-3
+^^^^^^^^^^^^^^^^
-**Option** ``ns3/TcpModel`` **Default:** "default" (NS3 default)
+**Option** ``ns3/TcpModel`` **Default:** "default" (ns-3 default)
-When using NS3, there is an extra item ``ns3/TcpModel``, corresponding
+When using ns-3, there is an extra item ``ns3/TcpModel``, corresponding
to the ``ns3::TcpL4Protocol::SocketType`` configuration item in
-NS3. The only valid values (enforced on the SimGrid side) are
-'default' (no change to the NS3 configuration), 'NewReno' or 'Reno' or
+ns-3. The only valid values (enforced on the SimGrid side) are
+'default' (no change to the ns-3 configuration), 'NewReno' or 'Reno' or
'Tahoe'.
Configuring the Storage model
application, the stack will silently overflow on other parts of the
memory (see :ref:`contexts/guard-size <cfg=contexts/guard-size>`).
-.. _cfg=model-checker/hash:
-
-State Hashing
-.............
-
-Usually most of the time of the model-checker is spent comparing states. This
-process is complicated and consumes a lot of bandwidth and cache.
-In order to speedup the state comparison, the experimental ``model-checker/hash``
-configuration item enables the computation of a hash summarizing as much
-information of the state as possible into a single value. This hash can be used
-to avoid most of the comparisons: the costly comparison is then only used when
-the hashes are identical.
-
-Currently most of the state is not included in the hash because the
-implementation was found to be buggy and this options is not as useful as
-it could be. For this reason, it is currently disabled by default.
-
.. _cfg=model-check/replay:
Replaying buggy execution paths out of the model-checker
[ 0.000000] (0:@) Executed transitions = 46
The interesting line is ``Path = 1/3;1/4``, which means that you should use
-`--cfg=model-check/replay:1/3;1/4`` to replay your application on the buggy
-execution path. The other options should be the same (but the model-checker
-should be disabled). Note that format and meaning of the path may change between
-different releases.
+``--cfg=model-check/replay:1/3;1/4`` to replay your application on the buggy
+execution path. All options (but the model-checker related ones) must
+remain the same. In particular, if you ran your application with
+``smpirun -wrapper simgrid-mc``, then do it again. Remove all
+MC-related options, keep the other ones and add
+``--cfg=model-check/replay``.
+
+Currently, if the path is of the form ``X;Y;Z``, each number denotes
+the actor's pid that is selected at each indecision point. If it's of
+the form ``X/a;Y/b``, the X and Y are the selected pids while the a
+and b are the return values of their simcalls. In the previouse
+example, ``1/3;1/4``, you can see from the full output that the actor
+1 is doing MC_RANDOM simcalls, so the 3 and 4 simply denote the values
+that these simcall return.
Configuring the User Code Virtualization
----------------------------------------
Other Configurations
--------------------
-.. _cfg=clean-atexit:
+.. _cfg=debug/clean-atexit:
Cleanup at Termination
......................
-**Option** ``clean-atexit`` **default:** on
+**Option** ``debug/clean-atexit`` **default:** on
If your code is segfaulting during its finalization, it may help to
disable this option to request SimGrid to not attempt any cleanups at
item. To add several directory to the path, set the configuration
item several times, as in ``--cfg=path:toto --cfg=path:tutu``
-.. _cfg=simix/breakpoint:
+.. _cfg=debug/breakpoint:
Set a Breakpoint
................
-**Option** ``simix/breakpoint`` **default:** unset
+**Option** ``debug/breakpoint`` **default:** unset
This configuration option sets a breakpoint: when the simulated clock
reaches the given time, a SIGTRAP is raised. This can be used to stop
set variable simgrid::simix::breakpoint = 3.1416
-.. _cfg=verbose-exit:
+.. _cfg=debug/verbose-exit:
Behavior on Ctrl-C
..................
-**Option** ``verbose-exit`` **default:** on
+**Option** ``debug/verbose-exit`` **default:** on
By default, when Ctrl-C is pressed, the status of all existing actors
is displayed before exiting the simulation. This is very useful to
