-/* Copyright (c) 2004-2018. The SimGrid Team. All rights reserved. */
+/* Copyright (c) 2004-2019. The SimGrid Team. All rights reserved. */
/* This program is free software; you can redistribute it and/or modify it
* under the terms of the license (GNU LGPL) which comes with this package. */
-#include <xbt/ex.hpp>
+#include <cmath>
+#include "simgrid/Exception.hpp"
+#include "simgrid/s4u/Actor.hpp"
+#include "simgrid/s4u/Comm.hpp"
+#include "simgrid/s4u/Exec.hpp"
+#include "simgrid/s4u/Mailbox.hpp"
#include "src/instr/instr_private.hpp"
-#include "src/kernel/activity/ExecImpl.hpp"
#include "src/msg/msg_private.hpp"
-#include "src/simix/smx_private.hpp" /* MSG_task_listen looks inside the rdv directly. Not clean. */
XBT_LOG_NEW_DEFAULT_SUBCATEGORY(msg_gos, msg, "Logging specific to MSG (gos)");
-/** \ingroup msg_task_usage
- * \brief Executes a task and waits for its termination.
- *
- * This function is used for describing the behavior of a process. It takes only one parameter.
- * \param task a #msg_task_t to execute on the location on which the process is running.
- * \return #MSG_OK if the task was successfully completed, #MSG_TASK_CANCELED or #MSG_HOST_FAILURE otherwise
- */
-msg_error_t MSG_task_execute(msg_task_t task)
-{
- return MSG_parallel_task_execute(task);
-}
-
-/** \ingroup msg_task_usage
- * \brief Executes a parallel task and waits for its termination.
- *
- * \param task a #msg_task_t to execute on the location on which the process is running.
- *
- * \return #MSG_OK if the task was successfully completed, #MSG_TASK_CANCELED
- * or #MSG_HOST_FAILURE otherwise
- */
-msg_error_t MSG_parallel_task_execute(msg_task_t task)
-{
- return MSG_parallel_task_execute_with_timeout(task, -1);
-}
-
-msg_error_t MSG_parallel_task_execute_with_timeout(msg_task_t task, double timeout)
-{
- simdata_task_t simdata = task->simdata;
- e_smx_state_t comp_state;
- msg_error_t status = MSG_OK;
-
- TRACE_msg_task_execute_start(task);
-
- xbt_assert((not simdata->compute) && not task->simdata->isused,
- "This task is executed somewhere else. Go fix your code!");
-
- XBT_DEBUG("Computing on %s", MSG_process_get_name(MSG_process_self()));
-
- if (simdata->flops_amount <= 0.0 && not simdata->host_nb) {
- TRACE_msg_task_execute_end(task);
- return MSG_OK;
- }
-
- try {
- simdata->setUsed();
-
- if (simdata->host_nb > 0) {
- simdata->compute =
- boost::static_pointer_cast<simgrid::kernel::activity::ExecImpl>(simcall_execution_parallel_start(
- task->name, simdata->host_nb, simdata->host_list, simdata->flops_parallel_amount,
- simdata->bytes_parallel_amount, -1.0, timeout));
- XBT_DEBUG("Parallel execution action created: %p", simdata->compute.get());
- } else {
- simdata->compute = boost::static_pointer_cast<simgrid::kernel::activity::ExecImpl>(
- simcall_execution_start(task->name, simdata->flops_amount, simdata->priority, simdata->bound,
- MSG_process_get_host(MSG_process_self())));
- }
- simcall_set_category(simdata->compute, task->category);
- comp_state = simcall_execution_wait(simdata->compute);
-
- simdata->setNotUsed();
-
- XBT_DEBUG("Execution task '%s' finished in state %d", task->name, (int)comp_state);
- }
- catch (xbt_ex& e) {
- switch (e.category) {
- case cancel_error:
- status = MSG_TASK_CANCELED;
- break;
- case host_error:
- status = MSG_HOST_FAILURE;
- break;
- case timeout_error:
- status = MSG_TIMEOUT;
- break;
- default:
- throw;
- }
- }
-
- /* action ended, set comm and compute = nullptr, the actions is already destroyed in the main function */
- simdata->flops_amount = 0.0;
- simdata->comm = nullptr;
- simdata->compute = nullptr;
- TRACE_msg_task_execute_end(task);
-
- return status;
-}
-
-/** \ingroup msg_task_usage
- * \brief Sleep for the specified number of seconds
- *
- * Makes the current process sleep until \a time seconds have elapsed.
- *
- * \param nb_sec a number of second
- */
-msg_error_t MSG_process_sleep(double nb_sec)
-{
- msg_error_t status = MSG_OK;
-
- if (TRACE_actor_is_enabled())
- simgrid::instr::Container::by_name(instr_pid(MSG_process_self()))->get_state("ACTOR_STATE")->push_event("sleep");
-
- try {
- simcall_process_sleep(nb_sec);
- }
- catch(xbt_ex& e) {
- if (e.category == cancel_error) {
- XBT_DEBUG("According to the JAVA API, a sleep call should only deal with HostFailureException, I'm lost.");
- // adsein: MSG_TASK_CANCELED is assigned when someone kills the process that made the sleep, this is not
- // correct. For instance, when the node is turned off, the error should be MSG_HOST_FAILURE, which is by the way
- // and according to the JAVA document, the only exception that can be triggered by MSG_Process_sleep call.
- // To avoid possible impacts in the code, I just raised a host_failure exception for the moment in the JAVA code
- // and did not change anythings at the C level.
- // See comment in the jmsg_process.c file, function JNIEXPORT void JNICALL Java_org_simgrid_msg_Process_sleep(JNIEnv *env, jclass cls, jlong jmillis, jint jnanos)
- status = MSG_TASK_CANCELED;
- } else
- throw;
- }
-
- if (TRACE_actor_is_enabled())
- simgrid::instr::Container::by_name(instr_pid(MSG_process_self()))->get_state("ACTOR_STATE")->pop_event();
-
- return status;
-}
-
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox.
+/**
+ * @brief Receives a task from a mailbox.
*
* This is a blocking function, the execution flow will be blocked until the task is received. See #MSG_task_irecv
* for receiving tasks asynchronously.
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE otherwise.
*/
return MSG_task_receive_with_timeout(task, alias, -1);
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox at a given rate.
+/**
+ * @brief Receives a task from a mailbox at a given rate.
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
- * \param rate limit the reception to rate bandwidth (byte/sec)
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
+ * @param rate limit the reception to rate bandwidth (byte/sec)
*
- * The rate parameter can be used to receive a task with a limited
- * bandwidth (smaller than the physical available value). Use
- * MSG_task_receive() if you don't limit the rate (or pass -1 as a
- * rate value do disable this feature).
+ * The rate parameter can be used to receive a task with a limited bandwidth (smaller than the physical available
+ * value). Use MSG_task_receive() if you don't limit the rate (or pass -1 as a rate value do disable this feature).
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE otherwise.
*/
return MSG_task_receive_with_timeout_bounded(task, alias, -1, rate);
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox with a given timeout.
+/**
+ * @brief Receives a task from a mailbox with a given timeout.
*
* This is a blocking function with a timeout, the execution flow will be blocked until the task is received or the
* timeout is achieved. See #MSG_task_irecv for receiving tasks asynchronously. You can provide a -1 timeout
* to obtain an infinite timeout.
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
- * \param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_receive)
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
+ * @param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_receive)
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
*/
return MSG_task_receive_ext(task, alias, timeout, nullptr);
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox with a given timeout and at a given rate.
+/**
+ * @brief Receives a task from a mailbox with a given timeout and at a given rate.
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
- * \param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_receive)
- * \param rate limit the reception to rate bandwidth (byte/sec)
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
+ * @param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_receive)
+ * @param rate limit the reception to rate bandwidth (byte/sec)
*
* The rate parameter can be used to send a task with a limited
* bandwidth (smaller than the physical available value). Use
* MSG_task_receive() if you don't limit the rate (or pass -1 as a
* rate value do disable this feature).
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
*/
-msg_error_t MSG_task_receive_with_timeout_bounded(msg_task_t * task, const char *alias, double timeout,double rate)
+msg_error_t MSG_task_receive_with_timeout_bounded(msg_task_t* task, const char* alias, double timeout, double rate)
{
return MSG_task_receive_ext_bounded(task, alias, timeout, nullptr, rate);
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox from a specific host with a given timeout.
+/**
+ * @brief Receives a task from a mailbox from a specific host with a given timeout.
*
* This is a blocking function with a timeout, the execution flow will be blocked until the task is received or the
* timeout is achieved. See #MSG_task_irecv for receiving tasks asynchronously. You can provide a -1 timeout
* to obtain an infinite timeout.
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
- * \param timeout is the maximum wait time for completion (provide -1 for no timeout)
- * \param host a #msg_host_t host from where the task was sent
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
+ * @param timeout is the maximum wait time for completion (provide -1 for no timeout)
+ * @param host a #msg_host_t host from where the task was sent
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
-* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
+ * #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
*/
msg_error_t MSG_task_receive_ext(msg_task_t * task, const char *alias, double timeout, msg_host_t host)
{
return MSG_task_receive_ext_bounded(task, alias, timeout, host, -1.0);
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox from a specific host with a given timeout and at a given rate.
+/**
+ * @brief Receives a task from a mailbox from a specific host with a given timeout and at a given rate.
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
- * \param timeout is the maximum wait time for completion (provide -1 for no timeout)
- * \param host a #msg_host_t host from where the task was sent
- * \param rate limit the reception to rate bandwidth (byte/sec)
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
+ * @param timeout is the maximum wait time for completion (provide -1 for no timeout)
+ * @param host a #msg_host_t host from where the task was sent
+ * @param rate limit the reception to rate bandwidth (byte/sec)
*
- * The rate parameter can be used to receive a task with a limited
- * bandwidth (smaller than the physical available value). Use
- * MSG_task_receive_ext() if you don't limit the rate (or pass -1 as a
- * rate value do disable this feature).
+ * The rate parameter can be used to receive a task with a limited bandwidth (smaller than the physical available
+ * value). Use MSG_task_receive_ext() if you don't limit the rate (or pass -1 as a rate value do disable this feature).
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
*/
double rate)
{
XBT_DEBUG("MSG_task_receive_ext: Trying to receive a message on mailbox '%s'", alias);
- simgrid::s4u::MailboxPtr mailbox = simgrid::s4u::Mailbox::byName(alias);
msg_error_t ret = MSG_OK;
/* We no longer support getting a task from a specific host */
if (host)
THROW_UNIMPLEMENTED;
- TRACE_msg_task_get_start();
-
/* Sanity check */
xbt_assert(task, "Null pointer for the task storage");
/* Try to receive it by calling SIMIX network layer */
try {
- simcall_comm_recv(MSG_process_self()->get_impl(), mailbox->get_impl(), task, nullptr, nullptr, nullptr, nullptr,
- timeout, rate);
- XBT_DEBUG("Got task %s from %s", (*task)->name, mailbox->get_cname());
- (*task)->simdata->setNotUsed();
- }
- catch (xbt_ex& e) {
- switch (e.category) {
- case host_error:
- case cancel_error:
- ret = MSG_HOST_FAILURE;
- break;
- case network_error:
+ void* payload;
+ simgrid::s4u::Mailbox::by_name(alias)
+ ->get_init()
+ ->set_dst_data(&payload, sizeof(msg_task_t*))
+ ->set_rate(rate)
+ ->wait_for(timeout);
+ *task = static_cast<msg_task_t>(payload);
+ XBT_DEBUG("Got task %s from %s", (*task)->get_cname(), alias);
+ (*task)->set_not_used();
+ } catch (simgrid::HostFailureException& e) {
+ ret = MSG_HOST_FAILURE;
+ } catch (simgrid::TimeoutError& e) {
+ ret = MSG_TIMEOUT;
+ } catch (simgrid::CancelException& e) {
+ ret = MSG_TASK_CANCELED;
+ } catch (xbt_ex& e) {
+ if (e.category == network_error)
ret = MSG_TRANSFER_FAILURE;
- break;
- case timeout_error:
- ret = MSG_TIMEOUT;
- break;
- default:
+ else
throw;
- }
}
- if (ret != MSG_HOST_FAILURE && ret != MSG_TRANSFER_FAILURE && ret != MSG_TIMEOUT) {
- TRACE_msg_task_get_end(*task);
- }
- return ret;
-}
+ if (TRACE_actor_is_enabled() && ret != MSG_HOST_FAILURE && ret != MSG_TRANSFER_FAILURE && ret != MSG_TIMEOUT) {
+ container_t process_container = simgrid::instr::Container::by_name(instr_pid(MSG_process_self()));
-/* Internal function used to factorize code between MSG_task_isend(), MSG_task_isend_bounded(), and MSG_task_dsend(). */
-static inline msg_comm_t MSG_task_isend_internal(msg_task_t task, const char* alias,
- void_f_pvoid_t cleanup, int detached)
-{
- simdata_task_t t_simdata = nullptr;
- msg_process_t myself = MSG_process_self();
- simgrid::s4u::MailboxPtr mailbox = simgrid::s4u::Mailbox::byName(alias);
- TRACE_msg_task_put_start(task);
-
- /* Prepare the task to send */
- t_simdata = task->simdata;
- t_simdata->sender = myself;
- t_simdata->source = MSG_host_self();
- t_simdata->setUsed();
- t_simdata->comm = nullptr;
- msg_global->sent_msg++;
-
- /* Send it by calling SIMIX network layer */
- smx_activity_t act =
- simcall_comm_isend(myself->get_impl(), mailbox->get_impl(), t_simdata->bytes_amount, t_simdata->rate, task,
- sizeof(void*), nullptr, cleanup, nullptr, nullptr, detached);
- t_simdata->comm = boost::static_pointer_cast<simgrid::kernel::activity::CommImpl>(act);
-
- msg_comm_t comm = nullptr;
- if (not detached) {
- comm = new simgrid::msg::Comm(task, nullptr, act);
+ std::string key = std::string("p") + std::to_string((*task)->get_id());
+ simgrid::instr::Container::get_root()->get_link("ACTOR_TASK_LINK")->end_event(process_container, "SR", key);
}
-
- if (TRACE_is_enabled())
- simcall_set_category(act, task->category);
- TRACE_msg_task_put_end();
-
- return comm;
-}
-
-/** \ingroup msg_task_usage
- * \brief Sends a task on a mailbox.
- *
- * This is a non blocking function: use MSG_comm_wait() or MSG_comm_test() to end the communication.
- *
- * \param task a #msg_task_t to send on another location.
- * \param alias name of the mailbox to sent the task to
- * \return the msg_comm_t communication created
- */
-msg_comm_t MSG_task_isend(msg_task_t task, const char *alias)
-{
- return MSG_task_isend_internal(task, alias, nullptr, 0);
-}
-
-/** \ingroup msg_task_usage
- * \brief Sends a task on a mailbox with a maximum rate
- *
- * This is a non blocking function: use MSG_comm_wait() or MSG_comm_test() to end the communication. The maxrate
- * parameter allows the application to limit the bandwidth utilization of network links when sending the task.
- *
- * \param task a #msg_task_t to send on another location.
- * \param alias name of the mailbox to sent the task to
- * \param maxrate the maximum communication rate for sending this task (byte/sec).
- * \return the msg_comm_t communication created
- */
-msg_comm_t MSG_task_isend_bounded(msg_task_t task, const char *alias, double maxrate)
-{
- task->simdata->rate = maxrate;
- return MSG_task_isend_internal(task, alias, nullptr, 0);
-}
-
-/** \ingroup msg_task_usage
- * \brief Sends a task on a mailbox.
- *
- * This is a non blocking detached send function.
- * Think of it as a best effort send. Keep in mind that the third parameter is only called if the communication fails.
- * If the communication does work, it is responsibility of the receiver code to free anything related to the task, as
- * usual. More details on this can be obtained on
- * <a href="http://lists.gforge.inria.fr/pipermail/simgrid-user/2011-November/002649.html">this thread</a>
- * in the SimGrid-user mailing list archive.
- *
- * \param task a #msg_task_t to send on another location.
- * \param alias name of the mailbox to sent the task to
- * \param cleanup a function to destroy the task if the communication fails, e.g. MSG_task_destroy
- * (if nullptr, no function will be called)
- */
-void MSG_task_dsend(msg_task_t task, const char *alias, void_f_pvoid_t cleanup)
-{
- msg_comm_t XBT_ATTRIB_UNUSED comm = MSG_task_isend_internal(task, alias, cleanup, 1);
- xbt_assert(comm == nullptr);
+ return ret;
}
-/** \ingroup msg_task_usage
- * \brief Sends a task on a mailbox with a maximal rate.
- *
- * This is a non blocking detached send function.
- * Think of it as a best effort send. Keep in mind that the third parameter is only called if the communication fails.
- * If the communication does work, it is responsibility of the receiver code to free anything related to the task, as
- * usual. More details on this can be obtained on
- * <a href="http://lists.gforge.inria.fr/pipermail/simgrid-user/2011-November/002649.html">this thread</a>
- * in the SimGrid-user mailing list archive.
- *
- * The rate parameter can be used to send a task with a limited
- * bandwidth (smaller than the physical available value). Use
- * MSG_task_dsend() if you don't limit the rate (or pass -1 as a rate
- * value do disable this feature).
- *
- * \param task a #msg_task_t to send on another location.
- * \param alias name of the mailbox to sent the task to
- * \param cleanup a function to destroy the task if the
- * communication fails, e.g. MSG_task_destroy
- * (if nullptr, no function will be called)
- * \param maxrate the maximum communication rate for sending this task (byte/sec)
- *
- */
-void MSG_task_dsend_bounded(msg_task_t task, const char *alias, void_f_pvoid_t cleanup, double maxrate)
-{
- task->simdata->rate = maxrate;
- MSG_task_dsend(task, alias, cleanup);
-}
-/** \ingroup msg_task_usage
- * \brief Starts listening for receiving a task from an asynchronous communication.
+/**
+ * @brief Starts listening for receiving a task from an asynchronous communication.
*
* This is a non blocking function: use MSG_comm_wait() or MSG_comm_test() to end the communication.
*
- * \param task a memory location for storing a #msg_task_t. has to be valid until the end of the communication.
- * \param name of the mailbox to receive the task on
- * \return the msg_comm_t communication created
+ * @param task a memory location for storing a #msg_task_t. has to be valid until the end of the communication.
+ * @param name of the mailbox to receive the task on
+ * @return the msg_comm_t communication created
*/
msg_comm_t MSG_task_irecv(msg_task_t *task, const char *name)
{
return MSG_task_irecv_bounded(task, name, -1.0);
}
-/** \ingroup msg_task_usage
- * \brief Starts listening for receiving a task from an asynchronous communication at a given rate.
+/**
+ * @brief Starts listening for receiving a task from an asynchronous communication at a given rate.
*
* The rate parameter can be used to receive a task with a limited
* bandwidth (smaller than the physical available value). Use
* MSG_task_irecv() if you don't limit the rate (or pass -1 as a rate
* value do disable this feature).
*
- * \param task a memory location for storing a #msg_task_t. has to be valid until the end of the communication.
- * \param name of the mailbox to receive the task on
- * \param rate limit the bandwidth to the given rate (byte/sec)
- * \return the msg_comm_t communication created
+ * @param task a memory location for storing a #msg_task_t. has to be valid until the end of the communication.
+ * @param name of the mailbox to receive the task on
+ * @param rate limit the bandwidth to the given rate (byte/sec)
+ * @return the msg_comm_t communication created
*/
msg_comm_t MSG_task_irecv_bounded(msg_task_t *task, const char *name, double rate)
{
- simgrid::s4u::MailboxPtr mbox = simgrid::s4u::Mailbox::byName(name);
+ simgrid::s4u::MailboxPtr mbox = simgrid::s4u::Mailbox::by_name(name);
/* FIXME: these functions are not traceable */
/* Sanity check */
XBT_CRITICAL("MSG_task_irecv() was asked to write in a non empty task struct.");
/* Try to receive it by calling SIMIX network layer */
- msg_comm_t comm = new simgrid::msg::Comm(
- nullptr, task,
- simcall_comm_irecv(SIMIX_process_self(), mbox->get_impl(), task, nullptr, nullptr, nullptr, nullptr, rate));
+ simgrid::s4u::CommPtr comm = simgrid::s4u::Mailbox::by_name(name)
+ ->get_init()
+ ->set_dst_data((void**)task, sizeof(msg_task_t*))
+ ->set_rate(rate)
+ ->start();
- return comm;
+ return new simgrid::msg::Comm(nullptr, task, comm);
}
-/** \ingroup msg_task_usage
- * \brief Checks whether a communication is done, and if yes, finalizes it.
- * \param comm the communication to test
- * \return 'true' if the communication is finished
+/**
+ * @brief Checks whether a communication is done, and if yes, finalizes it.
+ * @param comm the communication to test
+ * @return 'true' if the communication is finished
* (but it may have failed, use MSG_comm_get_status() to know its status)
* or 'false' if the communication is not finished yet
* If the status is 'false', don't forget to use MSG_process_sleep() after the test.
bool finished = false;
try {
- finished = simcall_comm_test(comm->s_comm);
+ finished = comm->s_comm->test();
if (finished && comm->task_received != nullptr) {
/* I am the receiver */
- (*comm->task_received)->simdata->setNotUsed();
+ (*comm->task_received)->set_not_used();
}
+ } catch (simgrid::TimeoutError& e) {
+ comm->status = MSG_TIMEOUT;
+ finished = true;
+ } catch (simgrid::CancelException& e) {
+ comm->status = MSG_TASK_CANCELED;
+ finished = true;
}
catch (xbt_ex& e) {
- switch (e.category) {
- case network_error:
- comm->status = MSG_TRANSFER_FAILURE;
- finished = true;
- break;
- case timeout_error:
- comm->status = MSG_TIMEOUT;
- finished = true;
- break;
- default:
- throw;
+ if (e.category == network_error) {
+ comm->status = MSG_TRANSFER_FAILURE;
+ finished = true;
+ } else {
+ throw;
}
}
return finished;
}
-/** \ingroup msg_task_usage
- * \brief This function checks if a communication is finished.
- * \param comms a vector of communications
- * \return the position of the finished communication if any
- * (but it may have failed, use MSG_comm_get_status() to know its status),
- * or -1 if none is finished
+/**
+ * @brief This function checks if a communication is finished.
+ * @param comms a vector of communications
+ * @return the position of the finished communication if any
+ * (but it may have failed, use MSG_comm_get_status() to know its status), or -1 if none is finished
*/
int MSG_comm_testany(xbt_dynar_t comms)
{
int finished_index = -1;
/* Create the equivalent array with SIMIX objects: */
- std::vector<simgrid::kernel::activity::ActivityImplPtr> s_comms;
+ std::vector<simgrid::kernel::activity::CommImpl*> s_comms;
s_comms.reserve(xbt_dynar_length(comms));
msg_comm_t comm;
unsigned int cursor;
xbt_dynar_foreach(comms, cursor, comm) {
- s_comms.push_back(comm->s_comm);
+ s_comms.push_back(static_cast<simgrid::kernel::activity::CommImpl*>(comm->s_comm->get_impl().get()));
}
msg_error_t status = MSG_OK;
try {
finished_index = simcall_comm_testany(s_comms.data(), s_comms.size());
+ } catch (simgrid::TimeoutError& e) {
+ finished_index = e.value;
+ status = MSG_TIMEOUT;
+ } catch (simgrid::CancelException& e) {
+ finished_index = e.value;
+ status = MSG_TASK_CANCELED;
}
catch (xbt_ex& e) {
- switch (e.category) {
- case network_error:
- finished_index = e.value;
- status = MSG_TRANSFER_FAILURE;
- break;
- case timeout_error:
- finished_index = e.value;
- status = MSG_TIMEOUT;
- break;
- default:
- throw;
- }
+ if (e.category != network_error)
+ throw;
+ finished_index = e.value;
+ status = MSG_TRANSFER_FAILURE;
}
if (finished_index != -1) {
if (status == MSG_OK && comm->task_received != nullptr) {
/* I am the receiver */
- (*comm->task_received)->simdata->setNotUsed();
+ (*comm->task_received)->set_not_used();
}
}
return finished_index;
}
-/** \ingroup msg_task_usage
- * \brief Destroys a communication.
- * \param comm the communication to destroy.
- */
+/** @brief Destroys the provided communication. */
void MSG_comm_destroy(msg_comm_t comm)
{
delete comm;
}
-/** \ingroup msg_task_usage
- * \brief Wait for the completion of a communication.
+/** @brief Wait for the completion of a communication.
*
* It takes two parameters.
- * \param comm the communication to wait.
- * \param timeout Wait until the communication terminates or the timeout occurs.
+ * @param comm the communication to wait.
+ * @param timeout Wait until the communication terminates or the timeout occurs.
* You can provide a -1 timeout to obtain an infinite timeout.
- * \return msg_error_t
+ * @return msg_error_t
*/
msg_error_t MSG_comm_wait(msg_comm_t comm, double timeout)
{
try {
- simcall_comm_wait(comm->s_comm, timeout);
+ comm->s_comm->wait_for(timeout);
if (comm->task_received != nullptr) {
/* I am the receiver */
- (*comm->task_received)->simdata->setNotUsed();
+ (*comm->task_received)->set_not_used();
}
/* FIXME: these functions are not traceable */
+ } catch (simgrid::TimeoutError& e) {
+ comm->status = MSG_TIMEOUT;
+ } catch (simgrid::CancelException& e) {
+ comm->status = MSG_TASK_CANCELED;
}
catch (xbt_ex& e) {
- switch (e.category) {
- case network_error:
+ if (e.category == network_error)
comm->status = MSG_TRANSFER_FAILURE;
- break;
- case timeout_error:
- comm->status = MSG_TIMEOUT;
- break;
- default:
+ else
throw;
- }
}
return comm->status;
}
-/** \ingroup msg_task_usage
-* \brief This function is called by a sender and permit to wait for each communication
-*
-* \param comm a vector of communication
-* \param nb_elem is the size of the comm vector
-* \param timeout for each call of MSG_comm_wait
-*/
+/** @brief This function is called by a sender and permit to wait for each communication
+ *
+ * @param comm a vector of communication
+ * @param nb_elem is the size of the comm vector
+ * @param timeout for each call of MSG_comm_wait
+ */
void MSG_comm_waitall(msg_comm_t * comm, int nb_elem, double timeout)
{
for (int i = 0; i < nb_elem; i++)
MSG_comm_wait(comm[i], timeout);
}
-/** \ingroup msg_task_usage
- * \brief This function waits for the first communication finished in a list.
- * \param comms a vector of communications
- * \return the position of the first finished communication
+/** @brief This function waits for the first communication finished in a list.
+ * @param comms a vector of communications
+ * @return the position of the first finished communication
* (but it may have failed, use MSG_comm_get_status() to know its status)
*/
int MSG_comm_waitany(xbt_dynar_t comms)
{
int finished_index = -1;
- /* create the equivalent dynar with SIMIX objects */
- xbt_dynar_t s_comms = xbt_dynar_new(sizeof(smx_activity_t), [](void*ptr){
- intrusive_ptr_release(*(simgrid::kernel::activity::ActivityImpl**)ptr);
- });
+ /* Create the equivalent array with SIMIX objects: */
+ std::vector<simgrid::kernel::activity::CommImpl*> s_comms;
+ s_comms.reserve(xbt_dynar_length(comms));
msg_comm_t comm;
unsigned int cursor;
xbt_dynar_foreach(comms, cursor, comm) {
- intrusive_ptr_add_ref(comm->s_comm.get());
- xbt_dynar_push_as(s_comms, simgrid::kernel::activity::ActivityImpl*, comm->s_comm.get());
+ s_comms.push_back(static_cast<simgrid::kernel::activity::CommImpl*>(comm->s_comm->get_impl().get()));
}
msg_error_t status = MSG_OK;
try {
- finished_index = simcall_comm_waitany(s_comms, -1);
+ finished_index = simcall_comm_waitany(s_comms.data(), s_comms.size(), -1);
+ } catch (simgrid::TimeoutError& e) {
+ finished_index = e.value;
+ status = MSG_TIMEOUT;
+ } catch (simgrid::CancelException& e) {
+ finished_index = e.value;
+ status = MSG_TASK_CANCELED;
}
catch(xbt_ex& e) {
- switch (e.category) {
- case network_error:
- finished_index = e.value;
- status = MSG_TRANSFER_FAILURE;
- break;
- case timeout_error:
- finished_index = e.value;
- status = MSG_TIMEOUT;
- break;
- default:
- throw;
+ if (e.category == network_error) {
+ finished_index = e.value;
+ status = MSG_TRANSFER_FAILURE;
+ } else {
+ throw;
}
}
xbt_assert(finished_index != -1, "WaitAny returned -1");
- xbt_dynar_free(&s_comms);
comm = xbt_dynar_get_as(comms, finished_index, msg_comm_t);
/* the communication is finished */
if (comm->task_received != nullptr) {
/* I am the receiver */
- (*comm->task_received)->simdata->setNotUsed();
+ (*comm->task_received)->set_not_used();
}
return finished_index;
}
/**
- * \ingroup msg_task_usage
- * \brief Returns the error (if any) that occurred during a finished communication.
- * \param comm a finished communication
- * \return the status of the communication, or #MSG_OK if no error occurred
- * during the communication
+ * @brief Returns the error (if any) that occurred during a finished communication.
+ * @param comm a finished communication
+ * @return the status of the communication, or #MSG_OK if no error occurred during the communication
*/
msg_error_t MSG_comm_get_status(msg_comm_t comm) {
return comm->status;
}
-/** \ingroup msg_task_usage
- * \brief Get a task (#msg_task_t) from a communication
+/** @brief Get a task (#msg_task_t) from a communication
*
- * \param comm the communication where to get the task
- * \return the task from the communication
+ * @param comm the communication where to get the task
+ * @return the task from the communication
*/
msg_task_t MSG_comm_get_task(msg_comm_t comm)
{
}
/**
- * \brief This function is called by SIMIX in kernel mode to copy the data of a comm.
- * \param synchro the comm
- * \param buff the data copied
- * \param buff_size size of the buffer
+ * @brief This function is called by SIMIX in kernel mode to copy the data of a comm.
+ * @param comm the comm
+ * @param buff the data copied
+ * @param buff_size size of the buffer
*/
-void MSG_comm_copy_data_from_SIMIX(smx_activity_t synchro, void* buff, size_t buff_size)
+void MSG_comm_copy_data_from_SIMIX(simgrid::kernel::activity::CommImpl* comm, void* buff, size_t buff_size)
{
- simgrid::kernel::activity::CommImplPtr comm =
- boost::static_pointer_cast<simgrid::kernel::activity::CommImpl>(synchro);
-
SIMIX_comm_copy_pointer_callback(comm, buff, buff_size);
// notify the user callback if any
if (msg_global->task_copy_callback) {
msg_task_t task = static_cast<msg_task_t>(buff);
- msg_global->task_copy_callback(task, comm->src_proc->ciface(), comm->dst_proc->ciface());
+ msg_global->task_copy_callback(task, comm->src_actor_->ciface(), comm->dst_actor_->ciface());
}
}
-/** \ingroup msg_task_usage
- * \brief Sends a task to a mailbox
- *
- * This is a blocking function, the execution flow will be blocked until the task is sent (and received on the other
- * side if #MSG_task_receive is used).
- * See #MSG_task_isend for sending tasks asynchronously.
- *
- * \param task the task to be sent
- * \param alias the mailbox name to where the task is sent
- *
- * \return Returns #MSG_OK if the task was successfully sent,
- * #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE otherwise.
- */
-msg_error_t MSG_task_send(msg_task_t task, const char *alias)
-{
- XBT_DEBUG("MSG_task_send: Trying to send a message on mailbox '%s'", alias);
- return MSG_task_send_with_timeout(task, alias, -1);
-}
-
-/** \ingroup msg_task_usage
- * \brief Sends a task to a mailbox with a maximum rate
- *
- * This is a blocking function, the execution flow will be blocked until the task is sent. The maxrate parameter allows
- * the application to limit the bandwidth utilization of network links when sending the task.
- *
- * The maxrate parameter can be used to send a task with a limited
- * bandwidth (smaller than the physical available value). Use
- * MSG_task_send() if you don't limit the rate (or pass -1 as a rate
- * value do disable this feature).
- *
- * \param task the task to be sent
- * \param alias the mailbox name to where the task is sent
- * \param maxrate the maximum communication rate for sending this task (byte/sec)
- *
- * \return Returns #MSG_OK if the task was successfully sent,
- * #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE otherwise.
- */
-msg_error_t MSG_task_send_bounded(msg_task_t task, const char *alias, double maxrate)
-{
- task->simdata->rate = maxrate;
- return MSG_task_send(task, alias);
-}
-
-/** \ingroup msg_task_usage
- * \brief Sends a task to a mailbox with a timeout
- *
- * This is a blocking function, the execution flow will be blocked until the task is sent or the timeout is achieved.
- *
- * \param task the task to be sent
- * \param alias the mailbox name to where the task is sent
- * \param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_send)
- *
- * \return Returns #MSG_OK if the task was successfully sent,
- * #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
- */
-msg_error_t MSG_task_send_with_timeout(msg_task_t task, const char *alias, double timeout)
-{
- msg_error_t ret = MSG_OK;
- simdata_task_t t_simdata = nullptr;
- msg_process_t process = MSG_process_self();
- simgrid::s4u::MailboxPtr mailbox = simgrid::s4u::Mailbox::byName(alias);
-
- TRACE_msg_task_put_start(task);
-
- /* Prepare the task to send */
- t_simdata = task->simdata;
- t_simdata->sender = process;
- t_simdata->source = MSG_host_self();
-
- t_simdata->setUsed();
-
- t_simdata->comm = nullptr;
- msg_global->sent_msg++;
-
- /* Try to send it by calling SIMIX network layer */
- try {
- smx_activity_t comm = nullptr; /* MC needs the comm to be set to nullptr during the simix call */
- comm = simcall_comm_isend(SIMIX_process_self(), mailbox->get_impl(), t_simdata->bytes_amount, t_simdata->rate, task,
- sizeof(void*), nullptr, nullptr, nullptr, nullptr, 0);
- if (TRACE_is_enabled())
- simcall_set_category(comm, task->category);
- t_simdata->comm = boost::static_pointer_cast<simgrid::kernel::activity::CommImpl>(comm);
- simcall_comm_wait(comm, timeout);
- }
- catch (xbt_ex& e) {
- switch (e.category) {
- case cancel_error:
- ret = MSG_HOST_FAILURE;
- break;
- case network_error:
- ret = MSG_TRANSFER_FAILURE;
- break;
- case timeout_error:
- ret = MSG_TIMEOUT;
- break;
- default:
- throw;
- }
-
- /* If the send failed, it is not used anymore */
- t_simdata->setNotUsed();
- }
-
- TRACE_msg_task_put_end();
- return ret;
-}
-
-/** \ingroup msg_task_usage
- * \brief Sends a task to a mailbox with a timeout and with a maximum rate
- *
- * This is a blocking function, the execution flow will be blocked until the task is sent or the timeout is achieved.
- *
- * The maxrate parameter can be used to send a task with a limited
- * bandwidth (smaller than the physical available value). Use
- * MSG_task_send_with_timeout() if you don't limit the rate (or pass -1 as a rate
- * value do disable this feature).
- *
- * \param task the task to be sent
- * \param alias the mailbox name to where the task is sent
- * \param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_send)
- * \param maxrate the maximum communication rate for sending this task (byte/sec)
- *
- * \return Returns #MSG_OK if the task was successfully sent,
- * #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
- */
-msg_error_t MSG_task_send_with_timeout_bounded(msg_task_t task, const char *alias, double timeout, double maxrate)
-{
- task->simdata->rate = maxrate;
- return MSG_task_send_with_timeout(task, alias, timeout);
-}
-
-/** \ingroup msg_task_usage
- * \brief Check if there is a communication going on in a mailbox.
- *
- * \param alias the name of the mailbox to be considered
+/**
+ * @brief Look if there is a communication on a mailbox and return the PID of the sender process.
*
- * \return Returns 1 if there is a communication, 0 otherwise
- */
-int MSG_task_listen(const char *alias)
-{
- simgrid::s4u::MailboxPtr mbox = simgrid::s4u::Mailbox::byName(alias);
- return mbox->listen() ? 1 : 0;
-}
-
-/** \ingroup msg_task_usage
- * \brief Look if there is a communication on a mailbox and return the PID of the sender process.
+ * @param alias the name of the mailbox to be considered
*
- * \param alias the name of the mailbox to be considered
+ * @return Returns the PID of sender process,
+ * -1 if there is no communication in the mailbox.#include <cmath>
*
- * \return Returns the PID of sender process,
- * -1 if there is no communication in the mailbox.
*/
int MSG_task_listen_from(const char *alias)
{
- simgrid::s4u::MailboxPtr mbox = simgrid::s4u::Mailbox::byName(alias);
- simgrid::kernel::activity::CommImplPtr comm =
- boost::static_pointer_cast<simgrid::kernel::activity::CommImpl>(mbox->front());
+ /* looks inside the rdv directly. Not clean. */
+ simgrid::kernel::activity::CommImplPtr comm = simgrid::s4u::Mailbox::by_name(alias)->front();
- if (not comm)
+ if (comm && comm->src_actor_)
+ return comm->src_actor_->get_pid();
+ else
return -1;
-
- return MSG_process_get_PID(static_cast<msg_task_t>(comm->src_buff)->simdata->sender);
-}
-
-/** \ingroup msg_task_usage
- * \brief Sets the tracing category of a task.
- *
- * This function should be called after the creation of a MSG task, to define the category of that task. The
- * first parameter task must contain a task that was created with the function #MSG_task_create. The second
- * parameter category must contain a category that was previously declared with the function #TRACE_category
- * (or with #TRACE_category_with_color).
- *
- * See \ref outcomes_vizu for details on how to trace the (categorized) resource utilization.
- *
- * \param task the task that is going to be categorized
- * \param category the name of the category to be associated to the task
- *
- * \see MSG_task_get_category, TRACE_category, TRACE_category_with_color
- */
-void MSG_task_set_category (msg_task_t task, const char *category)
-{
- TRACE_msg_set_task_category (task, category);
-}
-
-/** \ingroup msg_task_usage
- *
- * \brief Gets the current tracing category of a task.
- *
- * \param task the task to be considered
- *
- * \see MSG_task_set_category
- *
- * \return Returns the name of the tracing category of the given task, nullptr otherwise
- */
-const char *MSG_task_get_category (msg_task_t task)
-{
- return task->category;
}
