-set(CMAKE_MODULE_PATH
-${CMAKE_MODULE_PATH}
-${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/Modules
-)
+# x86_64
+# x86
+# i.86
+
+IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86")
+ IF(${ARCH_32_BITS})
+ set(PROCESSOR_i686 1)
+ set(SIMGRID_SYSTEM_PROCESSOR "${CMAKE_SYSTEM_PROCESSOR}")
+ message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}")
+ ELSE(${ARCH_32_BITS})
+ message(STATUS "System processor: amd64")
+ set(SIMGRID_SYSTEM_PROCESSOR "amd64")
+ set(PROCESSOR_x86_64 1)
+ set(PROCESSOR_i686 0)
+ ENDIF(${ARCH_32_BITS})
+ set(HAVE_RAWCTX 1)
+
+ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^alpha")
+ message(STATUS "System processor: alpha")
+
+ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^arm")
+ # Subdir is "arm" for both big-endian (arm) and little-endian (armel).
+ message(STATUS "System processor: arm")
+
+ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^mips")
+ # mips* machines are bi-endian mostly so processor does not tell
+ # endianess of the underlying system.
+ message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "mips" "mipsel" "mipseb")
+
+ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)64")
+ message(STATUS "System processor: ppc64")
+
+ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)")
+ message(STATUS "System processor: ppc")
+
+ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^sparc")
+ # Both flavours can run on the same processor
+ message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "sparc" "sparcv9")
+
+ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(parisc|hppa)")
+ message(STATUS "System processor: parisc" "parisc64")
+
+ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^s390")
+ # s390 binaries can run on s390x machines
+ message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "s390" "s390x")
+
+ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^sh")
+ message(STATUS "System processor: sh")
+
+ELSE(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64") #PROCESSOR NOT fIND
+ message(STATUS "PROCESSOR NOT FOUND: ${CMAKE_SYSTEM_PROCESSOR}")
+
+ENDIF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86")
message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}")
TEST_BIG_ENDIAN(BIGENDIAN)
include(FindGraphviz)
-
-string(TOUPPER ${enable_pcre} enable_pcre)
-if(enable_pcre STREQUAL "AUTO" OR enable_pcre STREQUAL "ON")
include(FindPCRE)
-endif(enable_pcre STREQUAL "AUTO" OR enable_pcre STREQUAL "ON")
+
set(HAVE_GTNETS 0)
if(enable_gtnets)
include(FindGTnets)
endif(enable_gtnets)
if(enable_smpi)
include(FindF2c)
+ if(HAVE_F2C_H)
+ SET(HAVE_SMPI 1)
+ endif(HAVE_F2C_H)
endif(enable_smpi)
if(enable_lua)
include(FindLua51Simgrid)
# Checks for header libraries functions.
CHECK_LIBRARY_EXISTS(pthread pthread_create "" pthread)
CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
+CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
CHECK_LIBRARY_EXISTS(pthread sem_timedwait "" HAVE_SEM_TIMEDWAIT_LIB)
CHECK_LIBRARY_EXISTS(pthread pthread_mutex_timedlock "" HAVE_MUTEX_TIMEDLOCK_LIB)
CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
CHECK_INCLUDE_FILE("windows.h" HAVE_WINDOWS_H)
CHECK_INCLUDE_FILE("winsock.h" HAVE_WINSOCK_H)
CHECK_INCLUDE_FILE("winsock2.h" HAVE_WINSOCK2_H)
+CHECK_INCLUDE_FILE("WinDef.h" HAVE_WINDEF_H)
CHECK_INCLUDE_FILE("errno.h" HAVE_ERRNO_H)
CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
CHECK_INCLUDE_FILE("stdio.h" HAVE_STDIO_H)
CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
-
CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
CHECK_FUNCTION_EXISTS(usleep HAVE_USLEEP)
CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
CHECK_FUNCTION_EXISTS(vasprintf HAVE_VASPRINTF)
CHECK_FUNCTION_EXISTS(makecontext HAVE_MAKECONTEXT)
CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
+CHECK_FUNCTION_EXISTS(mergesort HAVE_MERGESORT)
#Check if __thread is defined
-exec_program("${CMAKE_C_COMPILER} -lpthread ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_thread_storage.c"
- OUTPUT_VARIABLE HAVE_thread_storage_run)
+execute_process(
+COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_thread_storage.c"
+WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+OUTPUT_VARIABLE HAVE_thread_storage_run
+)
+
if(HAVE_thread_storage_run)
set(HAVE_THREAD_LOCAL_STORAGE 0)
else(HAVE_thread_storage_run)
endif(HAVE_thread_storage_run)
# Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
-IF(NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD")
+IF(NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND NOT "${CMAKE_SYSTEM}" MATCHES "GNU")
SET(HAVE_MMAP 0)
-ENDIF(NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD")
+ message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
+ENDIF(NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND NOT "${CMAKE_SYSTEM}" MATCHES "GNU")
if(WIN32) #THOSE FILES ARE FUNCTIONS ARE NOT DETECTED BUT THEY SHOULD...
set(HAVE_UCONTEXT_H 1)
endif(pthread)
if(pthread)
- ### HAVE_SEM_INIT
-
+ ### Test that we have a way to create semaphores
+
+ if(HAVE_SEM_OPEN_LIB)
+
+ exec_program(
+ "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_open.c -lpthread -o testprog"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
+ )
+
+ if(HAVE_SEM_OPEN_compil)
+ set(HAVE_SEM_OPEN 0)
+ message(STATUS "Warning: sem_open not compilable")
+ message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
+ else(HAVE_SEM_OPEN_compil)
+ set(HAVE_SEM_OPEN 1)
+ message(STATUS "sem_open is compilable")
+ endif(HAVE_SEM_OPEN_compil)
+
+ exec_program("${CMAKE_BINARY_DIR}/testprog" RETURN_VALUE HAVE_SEM_OPEN_run OUTPUT_VARIABLE var_compil)
+ file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
+
+ if(NOT HAVE_SEM_OPEN_run)
+ set(HAVE_SEM_OPEN 1)
+ message(STATUS "sem_open is executable")
+ else(NOT HAVE_SEM_OPEN_run)
+ set(HAVE_SEM_OPEN 0)
+ message(STATUS "Warning: sem_open not executable")
+ endif(NOT HAVE_SEM_OPEN_run)
+
+ else(HAVE_SEM_OPEN_LIB)
+ set(HAVE_SEM_OPEN 0)
+ endif(HAVE_SEM_OPEN_LIB)
+
if(HAVE_SEM_INIT_LIB)
- exec_program("${CMAKE_C_COMPILER} -lpthread ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_init.c" OUTPUT_VARIABLE HAVE_SEM_INIT_run)
- if(HAVE_SEM_INIT_run)
- set(HAVE_SEM_INIT 0)
- else(HAVE_SEM_INIT_run)
- set(HAVE_SEM_INIT 1)
- endif(HAVE_SEM_INIT_run)
+ exec_program(
+ "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_init.c -lpthread -o testprog"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_SEM_INIT_compil
+ )
+
+ if(HAVE_SEM_INIT_compil)
+ set(HAVE_SEM_INIT 0)
+ message(STATUS "Warning: sem_init not compilable")
+ message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
+ else(HAVE_SEM_INIT_compil)
+ set(HAVE_SEM_INIT 1)
+ message(STATUS "sem_init is compilable")
+ endif(HAVE_SEM_INIT_compil)
+
+ exec_program("${CMAKE_BINARY_DIR}/testprog" RETURN_VALUE HAVE_SEM_INIT_run OUTPUT_VARIABLE var_compil)
+ file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
+
+ if(NOT HAVE_SEM_INIT_run)
+ set(HAVE_SEM_INIT 1)
+ message(STATUS "sem_init is executable")
+ else(NOT HAVE_SEM_INIT_run)
+ set(HAVE_SEM_INIT 0)
+ message(STATUS "Warning: sem_init not executable")
+ endif(NOT HAVE_SEM_INIT_run)
endif(HAVE_SEM_INIT_LIB)
- ### HAVE_SEM_TIMEDWAIT
+ if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
+ message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
+ endif(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
+
+ ### Test that we have a way to timewait for semaphores
if(HAVE_SEM_TIMEDWAIT_LIB)
- exec_program("${CMAKE_C_COMPILER} -lpthread ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_timedwait.c" OUTPUT_VARIABLE HAVE_SEM_TIMEDWAIT_run)
+
+ execute_process(
+ COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_sem_timedwait.c -lpthread"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_SEM_TIMEDWAIT_run
+ )
+
if(HAVE_SEM_TIMEDWAIT_run)
set(HAVE_SEM_TIMEDWAIT 0)
+ message(STATUS "timedwait not compilable")
else(HAVE_SEM_TIMEDWAIT_run)
set(HAVE_SEM_TIMEDWAIT 1)
+ message(STATUS "timedwait is compilable")
endif(HAVE_SEM_TIMEDWAIT_run)
endif(HAVE_SEM_TIMEDWAIT_LIB)
### HAVE_MUTEX_TIMEDLOCK
if(HAVE_MUTEX_TIMEDLOCK_LIB)
- exec_program("${CMAKE_C_COMPILER} -lpthread ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_mutex_timedlock.c" OUTPUT_VARIABLE HAVE_SEM_TIMEDWAIT_run)
+
+ execute_process(
+ COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_mutex_timedlock.c -lpthread"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_MUTEX_TIMEDLOCK_run
+ )
+
if(HAVE_MUTEX_TIMEDLOCK_run)
set(HAVE_MUTEX_TIMEDLOCK 0)
+ message(STATUS "timedlock not compilable")
else(HAVE_MUTEX_TIMEDLOCK_run)
+ message(STATUS "timedlock is compilable")
set(HAVE_MUTEX_TIMEDLOCK 1)
endif(HAVE_MUTEX_TIMEDLOCK_run)
endif(HAVE_MUTEX_TIMEDLOCK_LIB)
endif(CMAKE_SYSTEM_NAME MATCHES "Darwin")
if(WIN32)
- if(__VISUALC__)
- set(mcsc_flags "/D_XBT_WIN32 /I${CMAKE_HOME_DIRECTORY}/include/xbt /I${CMAKE_HOME_DIRECTORY}/src/xbt")
- endif(__VISUALC__)
- if(__GNUC__)
- set(mcsc_flags "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/include/xbt -I${CMAKE_HOME_DIRECTORY}/src/xbt")
- endif(__GNUC__)
+ set(mcsc_flags "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/include/xbt -I${CMAKE_HOME_DIRECTORY}/src/xbt")
endif(WIN32)
IF(CMAKE_CROSSCOMPILING)
set(IS_WINDOWS 1)
ENDIF(WIN32)
ELSE(CMAKE_CROSSCOMPILING)
- try_run(RUN_mcsc_VAR COMPILE_mcsc_VAR
- ${simgrid_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_AC_CHECK_MCSC.c
- COMPILE_DEFINITIONS "${mcsc_flags}"
- OUTPUT_VARIABLE var_compil
- )
-
- if(EXISTS "${simgrid_BINARY_DIR}/conftestval" AND COMPILE_mcsc_VAR)
- file(READ "${simgrid_BINARY_DIR}/conftestval" mcsc)
- STRING(REPLACE "\n" "" mcsc "${mcsc}")
- if(mcsc)
- set(mcsc "yes")
- elseif(mcsc)
- set(mcsc "no")
- endif(mcsc)
- else(EXISTS "${simgrid_BINARY_DIR}/conftestval" AND COMPILE_mcsc_VAR)
+ file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
+ file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
+ exec_program(
+ "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_AC_CHECK_MCSC.c ${mcsc_flags} -o testprog"
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/
+ OUTPUT_VARIABLE COMPILE_mcsc_VAR)
+
+ if(NOT COMPILE_mcsc_VAR)
+ message(STATUS "prog_AC_CHECK_MCSC.c is compilable")
+ exec_program("${CMAKE_BINARY_DIR}/testprog" OUTPUT_VARIABLE var_compil)
+ else(NOT COMPILE_mcsc_VAR)
+ message(STATUS "prog_AC_CHECK_MCSC.c is not compilable")
+ endif(NOT COMPILE_mcsc_VAR)
+ file(REMOVE "${CMAKE_BINARY_DIR}/testprog*")
+
+ if(EXISTS "${CMAKE_BINARY_DIR}/conftestval")
+ file(READ "${CMAKE_BINARY_DIR}/conftestval" mcsc)
+ STRING(REPLACE "\n" "" mcsc "${mcsc}")
+ if(mcsc)
+ set(mcsc "yes")
+ set(HAVE_UCONTEXT_H 1)
+ else(mcsc)
set(mcsc "no")
- endif(EXISTS "${simgrid_BINARY_DIR}/conftestval" AND COMPILE_mcsc_VAR)
+ endif(mcsc)
+ else(EXISTS "${CMAKE_BINARY_DIR}/conftestval")
+ set(mcsc "no")
+ endif(EXISTS "${CMAKE_BINARY_DIR}/conftestval")
+
+ message(STATUS "mcsc: ${mcsc}")
ENDIF(CMAKE_CROSSCOMPILING)
if(mcsc MATCHES "no" AND pthread)
###############
## SVN version check
##
-if(IS_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.svn)
- find_file(SVN ".svn" ${CMAKE_HOME_DIRECTORY})
- exec_program("svnversion ${CMAKE_HOME_DIRECTORY}" OUTPUT_VARIABLE "SVN_VERSION")
- message(STATUS "svn version ${SVN_VERSION}")
-else(IS_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.svn)
- exec_program("git config --get svn-remote.svn.url"
- OUTPUT_VARIABLE url
- RETURN_VALUE ret)
-endif(IS_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.svn)
+if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/ AND NOT WIN32)
+exec_program("git remote | head -n 1" OUTPUT_VARIABLE remote RETURN_VALUE ret)
+exec_program("git config --get remote.${remote}.url" OUTPUT_VARIABLE url RETURN_VALUE ret)
if(url)
exec_program("git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --oneline -1" OUTPUT_VARIABLE "GIT_VERSION")
+ message(STATUS "Git version: ${GIT_VERSION}")
exec_program("git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --format=%ai ." OUTPUT_VARIABLE "GIT_DATE")
-
+ message(STATUS "Git date: ${GIT_DATE}")
string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
STRING(REPLACE " +0000" "" GIT_DATE ${GIT_DATE})
STRING(REPLACE " " "~" GIT_DATE ${GIT_DATE})
STRING(REPLACE ":" "-" GIT_DATE ${GIT_DATE})
-
- exec_program("git svn info" ${CMAKE_HOME_DIRECTORY}
- OUTPUT_VARIABLE "GIT_SVN_VERSION")
- string(REPLACE "\n" ";" GIT_SVN_VERSION ${GIT_SVN_VERSION})
- foreach(line ${GIT_SVN_VERSION})
- string(REGEX MATCH "^Revision:.*" line_good ${line})
- if(line_good)
- string(REPLACE "Revision: " ""
- line_good ${line_good})
- set(SVN_VERSION ${line_good})
- endif(line_good)
- endforeach(line ${GIT_SVN_VERSION})
endif(url)
-
+endif(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/ AND NOT WIN32)
###################################
## SimGrid and GRAS specific checks
IF(NOT CMAKE_CROSSCOMPILING)
# Check architecture signature begin
try_run(RUN_GRAS_VAR COMPILE_GRAS_VAR
- ${simgrid_BINARY_DIR}
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_GRAS_ARCH.c
RUN_OUTPUT_VARIABLE var1
)
set(GRAS_BIGENDIAN 0)
endif(BIGENDIAN)
+# The syntax of this magic string is given in src/gras/DataDesc/ddt_convert.c
+# It kinda matches the values that the gras_arch_desc_t structure can take
+
+# Basically, the syntax is one char l or B for endianness (little or Big)
+# then there is a bunch of blocks separated by _.
+# C block is for char, I block for integers, P block for pointers and
+# D block for floating points
+# For each block there is an amount of chuncks separated by :, each of
+# them describing a data size. For example there is only one chunk
+# in the char block, because no architecture provide several sizes
+# of chars. In integer block, there is 4 chunks: "short int", "int",
+# "long int", "long long int". There is 2 pointer chunks for data
+# pointers and pointers on functions (thanks to the AMD64 madness).
+# Thee two floating points chuncks are for "float" and "double".
+# Each chunk is of the form datasize/minimal_alignment_size
+
+# These informations are used to convert a data stream from one
+# formalism to another. Only the GRAS_ARCH is transfered in the
+# stream, and it it of cruxial importance to keep these detection
+# information here synchronized with the data hardcoded in the
+# source in src/gras/DataDesc/ddt_convert.c
+
+# If you add something here (like a previously unknown architecture),
+# please add it to the source code too.
+# Please do not modify stuff here since it'd break the GRAS protocol.
+# If you really need to change stuff, please also bump
+# GRAS_PROTOCOL_VERSION in src/gras/Msg/msg_interface.h
+
+SET(GRAS_THISARCH "none")
+
if(val_big MATCHES "l_C:1/1:_I:2/1:4/1:4/1:8/1:_P:4/1:4/1:_D:4/1:8/1:")
#gras_arch=0; gras_size=32; gras_arch_name=little32_1;
SET(GRAS_ARCH_32_BITS 1)
SET(GRAS_ARCH_32_BITS 0)
SET(GRAS_THISARCH 4)
endif(val_big MATCHES "l_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
+if(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:8/8:8/8:_D:4/4:8/8:")
+ #gras_arch=5; gras_size=64; gras_arch_name=little64_2;
+ SET(GRAS_ARCH_32_BITS 0)
+ SET(GRAS_THISARCH 5)
+endif(val_big MATCHES "l_C:1/1:_I:2/2:4/4:4/4:8/8:_P:8/8:8/8:_D:4/4:8/8:")
if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
- #gras_arch=5; gras_size=32; gras_arch_name=big32;
+ #gras_arch=6; gras_size=32; gras_arch_name=big32_8;
SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 5)
+ SET(GRAS_THISARCH 6)
endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/8:")
if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/4:")
- #gras_arch=6; gras_size=32; gras_arch_name=big32_8_4;
+ #gras_arch=7; gras_size=32; gras_arch_name=big32_8_4;
SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 6)
+ SET(GRAS_THISARCH 7)
endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/8:_P:4/4:4/4:_D:4/4:8/4:")
if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
- #gras_arch=7; gras_size=32; gras_arch_name=big32_4;
+ #gras_arch=8; gras_size=32; gras_arch_name=big32_4;
SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 7)
+ SET(GRAS_THISARCH 8)
endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:4/4:8/4:_P:4/4:4/4:_D:4/4:8/4:")
if(val_big MATCHES "B_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
- #gras_arch=8; gras_size=32; gras_arch_name=big32_2;
+ #gras_arch=9; gras_size=32; gras_arch_name=big32_2;
SET(GRAS_ARCH_32_BITS 1)
- SET(GRAS_THISARCH 8)
+ SET(GRAS_THISARCH 9)
endif(val_big MATCHES "B_C:1/1:_I:2/2:4/2:4/2:8/2:_P:4/2:4/2:_D:4/2:8/2:")
if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
- #gras_arch=9; gras_size=64; gras_arch_name=big64;
+ #gras_arch=10; gras_size=64; gras_arch_name=big64;
SET(GRAS_ARCH_32_BITS 0)
- SET(GRAS_THISARCH 9)
+ SET(GRAS_THISARCH 10)
endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/8:")
if(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/4:")
- #gras_arch=10;gras_size=64; gras_arch_name=big64_8_4;
+ #gras_arch=11; gras_size=64; gras_arch_name=big64_8_4;
SET(GRAS_ARCH_32_BITS 0)
- SET(GRAS_THISARCH 10)
+ SET(GRAS_THISARCH 11)
endif(val_big MATCHES "B_C:1/1:_I:2/2:4/4:8/8:8/8:_P:8/8:8/8:_D:4/4:8/4:")
+if(GRAS_THISARCH MATCHES "none")
+ message(STATUS "architecture: ${val_big}")
+ message(FATAL_ERROR "GRAS_THISARCH is empty: '${GRAS_THISARCH}'")
+endif(GRAS_THISARCH MATCHES "none")
# Check architecture signature end
try_run(RUN_GRAS_VAR COMPILE_GRAS_VAR
- ${simgrid_BINARY_DIR}
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_GRAS_CHECK_STRUCT_COMPACTION.c
RUN_OUTPUT_VARIABLE var2
)
# Check for [SIZEOF_MAX]
try_run(RUN_SM_VAR COMPILE_SM_VAR
- ${simgrid_BINARY_DIR}
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_max_size.c
RUN_OUTPUT_VARIABLE var3
)
+message(STATUS "SIZEOF_MAX ${var3}")
SET(SIZEOF_MAX ${var3})
ENDIF(NOT CMAKE_CROSSCOMPILING)
if(HAVE_MAKECONTEXT OR WIN32)
set(makecontext_CPPFLAGS "-DTEST_makecontext")
if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
- set(makecontext_CPPFLAGS_2 "-DOSX")
+ set(makecontext_CPPFLAGS_2 "-D_XOPEN_SOURCE")
endif(CMAKE_SYSTEM_NAME MATCHES "Darwin")
- if(WIN32 AND __VISUALC__)
- set(makecontext_CPPFLAGS "/DTEST_makecontext")
- set(makecontext_CPPFLAGS_2 "/D_XBT_WIN32 /I${CMAKE_HOME_DIRECTORY}/include/xbt /I${CMAKE_HOME_DIRECTORY}/src/xbt")
- endif(WIN32 AND __VISUALC__)
- if(WIN32 AND __GNUC__)
- set(makecontext_CPPFLAGS "-DTEST_makecontext")
+ if(WIN32)
+ if(ARCH_32_BITS)
+ set(makecontext_CPPFLAGS "-DTEST_makecontext -D_I_X86_")
+ else(ARCH_32_BITS)
+ set(makecontext_CPPFLAGS "-DTEST_makecontext -D_AMD64_")
+ endif(ARCH_32_BITS)
set(makecontext_CPPFLAGS_2 "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/include/xbt -I${CMAKE_HOME_DIRECTORY}/src/xbt")
- endif(WIN32 AND __GNUC__)
+ endif(WIN32)
+
+ file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
- ${simgrid_BINARY_DIR}
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_stacksetup.c
COMPILE_DEFINITIONS "${makecontext_CPPFLAGS} ${makecontext_CPPFLAGS_2}"
)
- file(READ ${simgrid_BINARY_DIR}/conftestval MAKECONTEXT_ADDR_SIZE)
- string(REPLACE "\n" "" MAKECONTEXT_ADDR_SIZE "${MAKECONTEXT_ADDR_SIZE}")
- string(REGEX MATCH ;^.*,;MAKECONTEXT_ADDR "${MAKECONTEXT_ADDR_SIZE}")
- string(REGEX MATCH ;,.*$; MAKECONTEXT_SIZE "${MAKECONTEXT_ADDR_SIZE}")
- string(REPLACE "," "" makecontext_addr "${MAKECONTEXT_ADDR}")
- string(REPLACE "," "" makecontext_size "${MAKECONTEXT_SIZE}")
- set(pth_skaddr_makecontext "#define pth_skaddr_makecontext(skaddr,sksize) (${makecontext_addr})")
- set(pth_sksize_makecontext "#define pth_sksize_makecontext(skaddr,sksize) (${makecontext_size})")
-
+
+ if(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
+ file(READ ${CMAKE_BINARY_DIR}/conftestval MAKECONTEXT_ADDR_SIZE)
+ string(REPLACE "\n" "" MAKECONTEXT_ADDR_SIZE "${MAKECONTEXT_ADDR_SIZE}")
+ string(REGEX MATCH ;^.*,;MAKECONTEXT_ADDR "${MAKECONTEXT_ADDR_SIZE}")
+ string(REGEX MATCH ;,.*$; MAKECONTEXT_SIZE "${MAKECONTEXT_ADDR_SIZE}")
+ string(REPLACE "," "" makecontext_addr "${MAKECONTEXT_ADDR}")
+ string(REPLACE "," "" makecontext_size "${MAKECONTEXT_SIZE}")
+ set(pth_skaddr_makecontext "#define pth_skaddr_makecontext(skaddr,sksize) (${makecontext_addr})")
+ set(pth_sksize_makecontext "#define pth_sksize_makecontext(skaddr,sksize) (${makecontext_size})")
+ message(STATUS "${pth_skaddr_makecontext}")
+ message(STATUS "${pth_sksize_makecontext}")
+ else(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
+# message(FATAL_ERROR "makecontext is not compilable")
+ endif(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
endif(HAVE_MAKECONTEXT OR WIN32)
#--------------------------------------------------------------------------------------------------
### check for stackgrowth
if (NOT CMAKE_CROSSCOMPILING)
try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
- ${simgrid_BINARY_DIR}
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_stackgrowth.c
)
-file(READ "${simgrid_BINARY_DIR}/conftestval" stack)
+file(READ "${CMAKE_BINARY_DIR}/conftestval" stack)
if(stack MATCHES "down")
set(PTH_STACKGROWTH "-1")
endif(stack MATCHES "down")
#AC_PRINTF_NULL
try_run(RUN_PRINTF_NULL_VAR COMPILE_PRINTF_NULL_VAR
- ${simgrid_BINARY_DIR}
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_printf_null.c
)
}
va_end(ap);
}
- int main(int argc, char *argv[])
+ int main(void)
{
- test("test", 1, 2, 3, 4, 5, 6, 7, 8, 9);
+ test(\"test\", 1, 2, 3, 4, 5, 6, 7, 8, 9);
exit(0);
}"
)
try_compile(COMPILE_VA_NULL_VAR
- ${simgrid_BINARY_DIR}
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_va_copy.c
)
if(COMPILE_VA_NULL_VAR)
#--------------------------------------------------------------------------------------------------
### check for getline
try_compile(COMPILE_RESULT_VAR
- ${simgrid_BINARY_DIR}
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_getline.c
)
#set(PREFER_PORTABLE_SNPRINTF 1)
else(CMAKE_CROSSCOMPILING)
try_run(RUN_SNPRINTF_FUNC_VAR COMPILE_SNPRINTF_FUNC_VAR
- ${simgrid_BINARY_DIR}
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_snprintf.c
)
endif(CMAKE_CROSSCOMPILING)
set(PREFER_PORTABLE_VSNPRINTF 1)
else(CMAKE_CROSSCOMPILING)
try_run(RUN_VSNPRINTF_FUNC_VAR COMPILE_VSNPRINTF_FUNC_VAR
- ${simgrid_BINARY_DIR}
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/test_prog/prog_vsnprintf.c
)
endif(CMAKE_CROSSCOMPILING)
set(ADDR2LINE "${ADDR2LINE}/addr2line")
endif(ADDR2LINE)
+
+
+### Check if OSX can compile with ucontext (with gcc 4.[1-5] it is broken)
+if(APPLE)
+ if(APPLE_NEED_GCC_VERSION GREATER COMPILER_C_VERSION_MAJOR_MINOR)
+ message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
+ set(HAVE_UCONTEXT_H 0)
+ endif(APPLE_NEED_GCC_VERSION GREATER COMPILER_C_VERSION_MAJOR_MINOR)
+endif(APPLE)
+
### File to create
configure_file("${CMAKE_HOME_DIRECTORY}/src/context_sysv_config.h.in" "${CMAKE_BINARY_DIR}/src/context_sysv_config.h" @ONLY IMMEDIATE)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/bin/smpiff @ONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/bin/smpirun @ONLY)
+if(NOT WIN32)
exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicc" OUTPUT_VARIABLE OKITOKI)
exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpif2c" OUTPUT_VARIABLE OKITOKI)
exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpiff" OUTPUT_VARIABLE OKITOKI)
exec_program("chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpirun" OUTPUT_VARIABLE OKITOKI)
+endif(NOT WIN32)
+
+set(generated_headers_to_install
+ ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/smpif.h
+ ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
+)
-set(generate_files_to_clean
-${CMAKE_BINARY_DIR}/src/context_sysv_config.h
-${CMAKE_BINARY_DIR}/src/gras_config.h
-${CMAKE_BINARY_DIR}/include/simgrid_config.h
-${CMAKE_BINARY_DIR}/include/smpi/smpif.h
+set(generated_headers
+ ${CMAKE_CURRENT_BINARY_DIR}/src/context_sysv_config.h
+ ${CMAKE_CURRENT_BINARY_DIR}/src/gras_config.h
+)
+
+set(generated_files_to_clean
+${generated_headers}
+${generated_headers_to_install}
${CMAKE_BINARY_DIR}/bin/smpicc
${CMAKE_BINARY_DIR}/bin/smpif2c
${CMAKE_BINARY_DIR}/bin/smpiff
${CMAKE_BINARY_DIR}/bin/smpirun
${CMAKE_BINARY_DIR}/bin/colorize
${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
-${CMAKE_BINARY_DIR}/examples/smpi/smpi_traced.trace
+${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
${CMAKE_BINARY_DIR}/src/supernovae_sg.c
${CMAKE_BINARY_DIR}/src/supernovae_gras.c
${CMAKE_BINARY_DIR}/src/supernovae_smpi.c
configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/small_platform_with_routers.xml ${CMAKE_BINARY_DIR}/examples/msg/small_platform_with_routers.xml COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/msg/tracing/platform.xml ${CMAKE_BINARY_DIR}/examples/msg/tracing/platform.xml COPYONLY)
- set(generate_files_to_clean
- ${generate_files_to_clean}
+ set(generated_files_to_clean
+ ${generated_files_to_clean}
${CMAKE_BINARY_DIR}/examples/smpi/hostfile
${CMAKE_BINARY_DIR}/examples/msg/small_platform.xml
${CMAKE_BINARY_DIR}/examples/msg/small_platform_with_routers.xml
endif("${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
-"${generate_files_to_clean}")
+"${generated_files_to_clean}")
+
+
+IF(${ARCH_32_BITS})
+ set(WIN_ARCH "32")
+ELSE(${ARCH_32_BITS})
+ set(WIN_ARCH "64")
+ENDIF(${ARCH_32_BITS})
+configure_file("${CMAKE_HOME_DIRECTORY}/buildtools/Cmake/simgrid.nsi.in" "${CMAKE_BINARY_DIR}/simgrid.nsi" @ONLY IMMEDIATE)
