# for a project that appears at the top of each page and should give viewer
# a quick idea about the purpose of the project. Keep the description short.
-PROJECT_BRIEF = "Scalable simulation of distributed systems"
+PROJECT_BRIEF = "Versatile Simulation of Distributed Systems"
# With the PROJECT_LOGO tag one can specify an logo or icon that is
# included in the documentation. The maximum height of the logo should not
# members were ordinary class members. Constructors, destructors and assignment
# operators of the base classes will not be shown.
-INLINE_INHERITED_MEMB = YES
+INLINE_INHERITED_MEMB = NO
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
# path before files name in the file list and in the header files. If set
# If left blank the directory from which doxygen is run is used as the
# path to strip.
-STRIP_FROM_PATH = @srcdir@
+STRIP_FROM_PATH = @top_srcdir@
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
# the path mentioned in the documentation of a class, which tells
# will result in a user-defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines.
-ALIASES =
+ALIASES = SimGridRelease="SimGrid-@release_version@"
# This tag can be used to specify a number of word-keyword mappings (TCL only).
# A mapping has the form "name=value". For example adding
TYPEDEF_HIDES_STRUCT = NO
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
-
-SYMBOL_CACHE_SIZE = 0
-
# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
# their name and scope. Since this can be an expensive process and often the
# disable (NO) the todo list. This list is created by putting \todo
# commands in the documentation.
-GENERATE_TODOLIST = YES
+GENERATE_TODOLIST = NO
# The GENERATE_TESTLIST tag can be used to enable (YES) or
# disable (NO) the test list. This list is created by putting \test
# disable (NO) the bug list. This list is created by putting \bug
# commands in the documentation.
-GENERATE_BUGLIST = YES
+GENERATE_BUGLIST = NO
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
# disable (NO) the deprecated list. This list is created by putting
# You can optionally specify a file name after the option, if omitted
# DoxygenLayout.xml will be used as the name of the layout file.
-LAYOUT_FILE = SimgridDoxygenLayout.xml
+LAYOUT_FILE = Layout.xml
# The CITE_BIB_FILES tag can be used to specify one or more bib files
# containing the references data. This must be a list of .bib files. The
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
# automatically be disabled.
-WARN_IF_UNDOCUMENTED = YES
+WARN_IF_UNDOCUMENTED = NO
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
# potential errors in the documentation, such as not documenting some
# wrong or incomplete parameter documentation, but not about the absence of
# documentation.
-WARN_NO_PARAMDOC = NO
+WARN_NO_PARAMDOC = YES
# The WARN_FORMAT tag determines the format of the warning messages that
# doxygen can produce. The string should contain the $file, $line, and $text
# directories like "/usr/src/myproject". Separate the files or directories
# with spaces.
-INPUT = index.doc \
- FAQ.doc
-
+INPUT = doxygen/index.doc \
+ doxygen/getting_started.doc \
+ doxygen/introduction.doc \
+ doxygen/install.doc \
+ doxygen/use.doc \
+ doxygen/platform.doc \
+ doxygen/deployment.doc \
+ doxygen/options.doc \
+ doxygen/help.doc \
+ doxygen/advanced.doc \
+ doxygen/pls.doc \
+ doxygen/bindings.doc \
+ doxygen/internals.doc \
+ doxygen/inside_doxygen.doc \
+ doxygen/inside_extending.doc \
+ doxygen/inside_cmake.doc \
+ doxygen/inside_autotests.doc \
+ doxygen/inside_release.doc \
+ doxygen/contributing.doc \
+ doxygen/tracing.doc \
+ doxygen/FAQ.doc \
+ doxygen/modules.doc \
+ doxygen/module-xbt.doc \
+ doxygen/module-msg.doc \
+ doxygen/module-sd.doc \
+ doxygen/module-surf.doc \
+ doxygen/module-simix.doc \
+ doxygen/module-smpi.doc \
+ doxygen/module-trace.doc \
+ index-API.doc \
+ @top_srcdir@/doc/doxygen/logcategories.doc \
+ @top_srcdir@/src/instr/ \
+ @bindir@/include \
+ @top_srcdir@/include/ \
+ @top_srcdir@/include/xbt \
+ @top_srcdir@/include/simgrid \
+ @top_srcdir@/src/include/surf \
+ @top_srcdir@/src/xbt/ \
+ @top_srcdir@/src/surf/ \
+ @top_srcdir@/src/surf/plugins/ \
+ @top_srcdir@/src/msg/ \
+ @top_srcdir@/src/simdag \
+ @top_srcdir@/src/simix \
+ @bindir@/src
+
+
+###################################################
+## PLEASE DON'T MESS WITH THE ORDER OF EXAMPLES ## (unless you know what you are doing, of course)
+###################################################
+
+INPUT += @top_srcdir@/examples/msg/sendrecv/sendrecv.c \
+ @top_srcdir@/examples/msg/masterslave/masterslave_forwarder.c \
+ @top_srcdir@/examples/msg/migration \
+ @top_srcdir@/examples/msg/suspend \
+ @top_srcdir@/examples/msg/properties \
+ @top_srcdir@/examples/msg/parallel_task \
+ @top_srcdir@/examples/msg/priority \
+ @top_srcdir@/examples/msg/icomms/peer.c \
+ @top_srcdir@/examples/msg/icomms/peer2.c \
+ @top_srcdir@/examples/msg/icomms/peer3.c \
+ @top_srcdir@/examples/msg/tracing/simple.c \
+ @top_srcdir@/examples/msg/tracing/ms.c \
+ @top_srcdir@/examples/msg/tracing/categories.c \
+ @top_srcdir@/examples/msg/tracing/procmig.c \
+ @top_srcdir@/examples/msg/tracing/trace_platform.c \
+ @top_srcdir@/examples/msg/tracing/user_variables.c \
+ @top_srcdir@/examples/msg/tracing/link_user_variables.c \
+ @top_srcdir@/examples/msg/tracing/link_srcdst_user_variables.c \
+ @top_srcdir@/examples/msg/ns3 \
+ @top_srcdir@/examples/msg/gtnets \
+ @top_srcdir@/examples/msg/io \
+ @top_srcdir@/examples/msg/gpu \
+ @top_srcdir@/examples/msg/actions \
+ @top_srcdir@/examples/msg/token_ring \
+ @top_srcdir@/examples/msg/pmm \
+ @top_srcdir@/examples/msg/chord
+
# This tag can be used to specify the character encoding of the source files
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
# also the default input encoding. Doxygen uses libiconv (or the iconv built
# Note that relative paths are relative to the directory from which doxygen is
# run.
-EXCLUDE =
+EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
EXAMPLE_PATH = ./ \
@top_srcdir@/src/surf/ \
@top_srcdir@/src/xbt/ \
- @top_srcdir@/examples \
- @top_srcdir@/testsuite
+ @top_srcdir@/examples
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# directories that contain image that are included in the documentation (see
# the \image command).
-IMAGE_PATH = @top_srcdir@/doc
+IMAGE_PATH = @top_srcdir@/doc \
+ @top_srcdir@/doc/webcruft
# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
# have to redo this when upgrading to a newer version of doxygen or when
# changing the value of configuration settings such as GENERATE_TREEVIEW!
-HTML_HEADER =
+HTML_HEADER = doxygen/header.html
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
# each generated HTML page. If it is left blank doxygen will generate a
# standard footer.
-HTML_FOOTER =
+HTML_FOOTER = doxygen/footer.html
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
# style sheet that is used by each HTML page. It can be used to
# the style sheet file to the HTML output directory, so don't put your own
# style sheet in the HTML output directory as well, or it will be erased!
-HTML_STYLESHEET =
+HTML_STYLESHEET = doxygen/stylesheet.css
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
-DISABLE_INDEX = NO
+DISABLE_INDEX = YES
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
# Since the tree basically has the same information as the tab index you
# could consider to set DISABLE_INDEX to NO when enabling this option.
-GENERATE_TREEVIEW = NO
+GENERATE_TREEVIEW = YES
# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
# (range [0,1..20]) that doxygen will group on one line in the generated HTML
# typically be disabled. For large projects the javascript based search engine
# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
-SEARCHENGINE = NO
+SEARCHENGINE = YES
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
# implemented using a PHP enabled web server instead of at the web client
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output.
-GENERATE_LATEX = YES
+GENERATE_LATEX = NO
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# include the index chapters (such as File Index, Compound Index, etc.)
# in the output.
-LATEX_HIDE_INDICES = NO
+LATEX_HIDE_INDICES = YES
# If LATEX_SOURCE_CODE is set to YES then doxygen will include
# source code with syntax highlighting in the LaTeX output.
GENERATE_XML = NO
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING = YES
-
#---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
PREDEFINED = DOXYGEN \
DOXYGEN_SKIP_IT \
- XBT_PUBLIC= \
+ XBT_PUBLIC(type)="extern type" \
+ XBT_EXPORT_NO_IMPORT(type)=type \
+ XBT_IMPORT_NO_EXPORT(type)=type \
+ XBT_PUBLIC_DATA(type)="extern type" \
+ XBT_PUBLIC_CLASS=class \
XBT_INLINE= \
- HAVE_TRACING \
MSG_USE_DEPRECATED
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
# NOT include the path). If a tag file is not located in the directory in which
# doxygen is run, you must also specify the path to the tagfile here.
-TAGFILES = shared/doxygen/simgridrefguide.tag=ref_guide/html/ \
- shared/doxygen/simgriduserguide.tag=user_guide/html/ \
- shared/doxygen/simgriddevguide.tag=dev_guide/html/
+TAGFILES =
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads.
