else()
message(FATAL_ERROR
"The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
- "Please use a decent C++ compiler.")
+ "Please install a decent C++ compiler (remove CMakeCache.txt once it's installed).")
endif()
### And we need C11 standard, too
set(HAVE_UCONTEXT_H 0)
endif()
+### Check threading support
+set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
+find_package(Threads)
+
+### Setup Options
+include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
+
### SMPI vs. Fortran
-if ((NOT DEFINED enable_smpi OR enable_smpi) AND NOT APPLE) # smpi is enabled by default
- # Call enable_language(Fortran) in order to load the build rules for this language, needed by
- # teshsuite/smpi/mpich-test/. Use CMAKE_FORCE_Fortran_COMPILER to bypass checks for a working compiler (smpiff
- # doesn't exist at configure time).
- include(CMakeForceCompiler)
- if(NOT COMMAND CMAKE_FORCE_Fortran_COMPILER)
- MACRO(CMAKE_FORCE_Fortran_COMPILER compiler id)
- SET(CMAKE_Fortran_COMPILER "${compiler}")
- SET(CMAKE_Fortran_COMPILER_ID_RUN TRUE)
- SET(CMAKE_Fortran_COMPILER_ID ${id})
- SET(CMAKE_Fortran_COMPILER_WORKS TRUE)
- SET(CMAKE_Fortran_COMPILER_FORCED TRUE)
-
- # Set old compiler id variables.
- IF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
- SET(CMAKE_COMPILER_IS_GNUG77 1)
- ENDIF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
- ENDMACRO(CMAKE_FORCE_Fortran_COMPILER)
+if ((NOT DEFINED enable_smpi) OR enable_smpi)
+ # First unset the compiler in case we're re-running cmake over a previous
+ # configuration where it was saved as smpiff
+ unset(CMAKE_Fortran_COMPILER)
+
+ SET(SMPI_FORTRAN 0)
+ if(enable_fortran)
+ enable_language(Fortran OPTIONAL)
endif()
- CMAKE_FORCE_Fortran_COMPILER(smpiff smpiff)
- enable_language(Fortran OPTIONAL)
+
+ if(CMAKE_Fortran_COMPILER)
+
+ # Fortran compiler detected: save it, then replace by smpiff
+ set(SMPI_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
+
+ # Set flags/libs to be used in smpiff
+ if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
+ set(SMPI_Fortran_FLAGS "\"-fpic\" \"-ff2c\" \"-fno-second-underscore\"")
+ set(SMPI_Fortran_LIBS "\"-lgfortran\"")
+ set(SMPI_GFORTRAN 1)
+ elseif(CMAKE_Fortran_COMPILER_ID MATCHES "Intel")
+ set(SMPI_Fortran_FLAGS "\"-fPIC\" \"-nofor-main\"")
+ set(SMPI_Fortran_LIBS "\"-lifcore\"")
+ set(SMPI_IFORT 1)
+ elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI|Flang") # flang
+ set(SMPI_Fortran_FLAGS "\"-fPIC\"")
+ set(SMPI_Fortran_LIBS "")
+ set(SMPI_FLANG 1)
+ endif()
+
+ set(SMPI_FORTRAN 1)
+ endif(CMAKE_Fortran_COMPILER)
+
endif()
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
set(SIMGRID_VERSION_MAJOR "3")
-set(SIMGRID_VERSION_MINOR "13")
+set(SIMGRID_VERSION_MINOR "20")
set(SIMGRID_VERSION_PATCH "90")
-set(SIMGRID_VERSION_EXTRA "-prealpha") # Extra words to add to version string (e.g. -rc1)
+set(SIMGRID_VERSION_EXTRA "-DEVEL") # Extra words to add to version string (e.g. -rc1)
-set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
+set(SIMGRID_VERSION_DATE "2018") # Year for copyright information
if(${SIMGRID_VERSION_PATCH} EQUAL "0")
set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
set(libsimgrid-java_version "${release_version}")
### SET THE LIBRARY EXTENSION
-if(APPLE) #MAC
+if(APPLE)
set(LIB_EXE "dylib")
+elseif(WIN32)
+ set(LIB_EXE "a")
+ set(BIN_EXE ".exe")
else()
- if(WIN32) #WINDOWS
- set(LIB_EXE "a")
- set(BIN_EXE ".exe")
- else() #UNIX
- set(LIB_EXE "so")
- endif()
+ set(LIB_EXE "so")
endif()
-execute_process(COMMAND ${CMAKE_LINKER} --version OUTPUT_VARIABLE LINKER_VERSION)
+execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION ERROR_VARIABLE LINKER_VERSION)
string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
+### Set the library providing dlopen
+if("${CMAKE_SYSTEM}" MATCHES "Linux")
+ find_library(DL_LIBRARY dl)
+endif("${CMAKE_SYSTEM}" MATCHES "Linux")
+
### Find programs and paths
FIND_PROGRAM(GCOV_PATH gcov)
include(FindPerl)
message(FATAL_ERROR "Please install Perl to compile SimGrid.")
endif()
-if (APPLE)
- set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
- set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
+# tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
+set(PythonInterp_FIND_VERSION 3)
+set(PythonInterp_FIND_VERSION_COUNT 1)
+set(PythonInterp_FIND_VERSION_MAJOR 3)
+include(FindPythonInterp)
+if(NOT PYTHONINTERP_FOUND)
+ message(FATAL_ERROR "Please install Python (version 3 or higher).")
endif()
+
SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
### Compute the include paths
-set(INCLUDES
+
+# Only include public headers by default
+include_directories(
+ ${CMAKE_BINARY_DIR}/include
+ ${CMAKE_HOME_DIRECTORY}/include
+)
+
+# Compute the ones that should be added when compiling the library
+set(INTERNAL_INCLUDES
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}
- ${CMAKE_HOME_DIRECTORY}/include
${CMAKE_HOME_DIRECTORY}/src/include
- ${CMAKE_BINARY_DIR}
- ${CMAKE_BINARY_DIR}/include
)
-if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
- set(INCLUDES ${INCLUDES} /usr/include/)
+if(enable_smpi)
+ set (INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_HOME_DIRECTORY}/src/smpi/include)
endif()
-### Check 32bits or 64bits
-IF(CMAKE_SIZEOF_VOID_P EQUAL 4)
- SET(ARCH_32_BITS 1)
-ELSE()
- SET(ARCH_32_BITS 0)
-ENDIF()
+if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
+ set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} /usr/include/)
+endif()
if(WIN32)
set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
- set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
+ set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_INCLUDE_WIN})
unset(CMAKE_INCLUDE_WIN)
endif()
-include_directories(${INCLUDES})
-
-### Setup Options
-include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
+# library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
+set(SIMGRID_DEP "-lm")
### Determine the assembly flavor that we need today
set(HAVE_RAW_CONTEXTS 0)
include(CMakeDetermineSystem)
IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
- IF(${ARCH_32_BITS})
+ IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
- set(PROCESSOR_i686 1)
- set(PROCESSOR_x86_64 0)
+ set(SIMGRID_PROCESSOR_i686 1)
+ set(SIMGRID_PROCESSOR_x86_64 0)
ELSE()
message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
- set(PROCESSOR_i686 0)
- set(PROCESSOR_x86_64 1)
+ set(SIMGRID_PROCESSOR_i686 0)
+ set(SIMGRID_PROCESSOR_x86_64 1)
ENDIF()
if (WIN32)
message(STATUS "Disable fast raw contexts on Windows.")
set(HAVE_RAW_CONTEXTS 1)
endif()
ELSE()
- set(PROCESSOR_i686 0)
- set(PROCESSOR_x86_64 0)
+ set(SIMGRID_PROCESSOR_i686 0)
+ set(SIMGRID_PROCESSOR_x86_64 0)
ENDIF()
include(CheckFunctionExists)
set(HAVE_GRAPHVIZ 0)
include(FindGraphviz)
-set(HAVE_LUA 0)
+set(SIMGRID_HAVE_LUA 0)
if(enable_lua)
include(FindLuaSimgrid)
endif()
-set(HAVE_NS3 0)
+set(SIMGRID_HAVE_NS3 0)
if(enable_ns3)
include(FindNS3)
- if (NOT HAVE_NS3)
+ if (SIMGRID_HAVE_NS3)
+ set(SIMGRID_HAVE_NS3 1)
+ foreach(lib core csma point-to-point internet network applications)
+ set(SIMGRID_DEP "${SIMGRID_DEP} -lns${NS3_VERSION}-${lib}${NS3_SUFFIX}")
+ endforeach()
+ else()
message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
endif()
endif()
if(WIN32)
set(Boost_USE_STATIC_LIBS 1)
endif()
+
set(HAVE_PAPI 0)
if(enable_smpi_papi)
include(FindPAPI)
endif()
endif()
+# Not finding this is perfectly OK
+find_package(Boost 1.59 COMPONENTS unit_test_framework)
+if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
+ message(STATUS "Enabling the Boost-based unit tests.")
+else()
+ message(STATUS "Disabling the Boost-based unit tests -- please install libboost-test-dev (>= v1.59).")
+endif()
+
+
find_package(Boost 1.48)
if(Boost_FOUND)
include_directories(${Boost_INCLUDE_DIRS})
else()
if(APPLE)
- message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
+ message(FATAL_ERROR "Boost libraries not found. Try to install them with 'sudo fink install boost1.53.nopython' (check the exact name with 'fink list boost') or 'sudo brew install boost'")
else()
- message(FATAL_ERROR "Failed to find Boost libraries."
- "Did you install libboost-dev and libboost-context-dev?"
- "(libboost-context-dev is optional)"
- "SimGrid requires Boost >= 1.48.0")
+ message(FATAL_ERROR "Boost libraries not found. Install libboost-dev (>= 1.48.0).")
endif()
endif()
-#Boost context 1.61 will break compatibility with our implementation.
-#Warn users about that
-find_package(Boost 1.61 COMPONENTS context)
-
-if(Boost_FOUND AND Boost_CONTEXT_FOUND)
- message("WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
-
- set(Boost_FOUND 1)
- set(HAVE_BOOST_CONTEXTS 0)
+find_package(Boost COMPONENTS context)
+set(Boost_FOUND 1) # This component is optional
+if(Boost_CONTEXT_FOUND)
+ message(STATUS "Found Boost.Context")
+ set(HAVE_BOOST_CONTEXTS 1)
else()
-# Try again to see if we have libboost-context
- find_package(Boost 1.42 COMPONENTS context)
- set(Boost_FOUND 1) # We don't care of whether this component is missing
-
- if(Boost_FOUND AND Boost_CONTEXT_FOUND)
- # We should use feature detection for this instead:
- if (Boost_VERSION LESS 105600)
- message("Found Boost.Context API v1")
- set(HAVE_BOOST_CONTEXTS 1)
- else()
- message("Found Boost.Context API v2")
- set(HAVE_BOOST_CONTEXTS 2)
- endif()
- else()
- message (" boost : found.")
- message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
- set(HAVE_BOOST_CONTEXTS 0)
- endif()
+ message (" boost : found.")
+ message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
+ set(HAVE_BOOST_CONTEXTS 0)
endif()
-# Try again to see if we have libboost-graph
-#find_package(Boost 1.42 COMPONENTS graph)
-#set(Boost_FOUND 1) # We don't care of whether this component is missing
-#
-#if(Boost_FOUND AND Boost_GRAPH_FOUND)
-# set(HAVE_BOOST_GRAPH 1)
-#else()
-# message (" boost : found.")
-# message (" boost-graph : missing. Install libboost-graph-dev for this optional feature.")
-# set(HAVE_BOOST_GRAPH 0)
-#endif()
-
# Checks for header libraries functions.
CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
-CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
-CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
-CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
set(HAVE_PTHREAD_SETAFFINITY 0)
CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
+CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
+CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
if(MINGW)
set(HAVE_VASPRINTF 1)
endif()
-#Check if __thread is defined
-execute_process(
- COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_thread_storage_run)
-file(REMOVE testprog)
-if(HAVE_thread_storage_run)
- set(HAVE_THREAD_LOCAL_STORAGE 1)
+CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
+CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
+if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
+ set(HAVE_SENDFILE 1)
else()
- set(HAVE_THREAD_LOCAL_STORAGE 0)
+ set(HAVE_SENDFILE 0)
endif()
-# Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
-IF(HAVE_MMAP AND
- NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND
- NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND
- NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND
- NOT "${CMAKE_SYSTEM}" MATCHES "Darwin")
- SET(HAVE_MMAP 0)
- message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
-ENDIF()
+if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
+ message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
+ set(enable_model-checking FALSE)
+endif()
-if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
+if(HAVE_MMAP)
SET(HAVE_MMALLOC 1)
else()
SET(HAVE_MMALLOC 0)
+ if(enable_model-checking)
+ message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
+ endif()
+ SET(enable_model-checking 0)
endif()
if(enable_jedule)
- set(HAVE_JEDULE 1)
+ set(SIMGRID_HAVE_JEDULE 1)
else()
- set(HAVE_JEDULE 0)
+ set(SIMGRID_HAVE_JEDULE 0)
endif()
if(enable_mallocators)
- SET(HAVE_MALLOCATOR 1)
+ SET(SIMGRID_HAVE_MALLOCATOR 1)
else()
- SET(HAVE_MALLOCATOR 0)
+ SET(SIMGRID_HAVE_MALLOCATOR 0)
endif()
-if(enable_model-checking AND HAVE_MMALLOC)
- SET(HAVE_MC 1)
- include(FindLibunwind)
- include(FindLibdw)
+include(FindLibunwind)
+if(HAVE_LIBUNWIND)
+ SET(SIMGRID_DEP "${SIMGRID_DEP} ${LIBUNWIND_LIBRARIES}")
else()
if(enable_model-checking)
- message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
+ message(FATAL_ERROR "Please install libunwind-dev libdw-dev libelf-dev libevent-dev if you want to compile the SimGrid model checker.")
endif()
- SET(HAVE_MC 0)
- SET(HAVE_MMALLOC 0)
endif()
+if(enable_model-checking)
+ find_package(Libdw REQUIRED)
+ find_package(Libelf REQUIRED)
+ find_package(Libevent REQUIRED)
+ include_directories(${LIBDW_INCLUDE_DIR} ${LIBELF_INCLUDE_DIR} ${LIBEVENT_INCLUDE_DIR})
+ set(SIMGRID_DEP "${SIMGRID_DEP} ${LIBEVENT_LIBRARIES} ${LIBELF_LIBRARIES} ${LIBDW_LIBRARIES}")
+ set(SIMGRID_HAVE_MC 1)
+ if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_java)
+ message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling java")
+ set(enable_java FALSE)
+ endif()
+else()
+ SET(SIMGRID_HAVE_MC 0)
+ set(HAVE_MMALLOC 0)
+endif()
+mark_as_advanced(PATH_LIBDW_H)
+mark_as_advanced(PATH_LIBDW_LIB)
+
if (enable_model-checking AND enable_ns3)
message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
endif()
if(enable_smpi)
- if(enable_fortran)
- include(FindGFortran)
- else()
- SET(SMPI_FORTRAN 0)
- endif()
SET(HAVE_SMPI 1)
- if("${CMAKE_SYSTEM}" MATCHES "Linux")
+ if("${CMAKE_SYSTEM}" MATCHES "Darwin|FreeBSD|Linux")
SET(USE_LIBUTIL 0)
SET(HAVE_PRIVATIZATION 1)
- elseif("${CMAKE_SYSTEM}" MATCHES "^FreeBSD")
- SET(USE_LIBUTIL 0)
- SET(HAVE_PRIVATIZATION 0)
else()
message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
SET(HAVE_PRIVATIZATION 0)
SET(HAVE_SMPI 0)
endif()
-#--------------------------------------------------------------------------------------------------
-### Check for GNU dynamic linker
-CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
-if (HAVE_DLFCN_H)
- execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c -ldl -o test_gnu_ld
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_GNU_LD_compil
- )
- if(HAVE_GNU_LD_compil)
- set(HAVE_GNU_LD 0)
- message(STATUS "Warning: test program toward GNU ld failed to compile:")
- message(STATUS "${HAVE_GNU_LD_comp_output}")
- else()
- execute_process(COMMAND ./test_gnu_ld
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_GNU_LD_run
- OUTPUT_VARIABLE var_exec
- )
-
- if(NOT HAVE_GNU_LD_run)
- set(HAVE_GNU_LD 1)
- message(STATUS "We are using GNU dynamic linker")
- else()
- set(HAVE_GNU_LD 0)
- message(STATUS "Warning: error while checking for GNU ld:")
- message(STATUS "Test output: '${var_exec}'")
- message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
- endif()
- file(REMOVE test_gnu_ld)
- endif()
-endif()
-
#--------------------------------------------------------------------------------------------------
### Initialize of CONTEXT THREADS
set(HAVE_THREAD_CONTEXTS 0)
-if(HAVE_PTHREAD)
+if(CMAKE_USE_PTHREADS_INIT)
### Test that we have a way to create semaphores
+ set(HAVE_SEM_OPEN 0)
+ CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
if(HAVE_SEM_OPEN_LIB)
- execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
- )
-
- # Test sem_open by compiling:
- if(HAVE_SEM_OPEN_compil)
- set(HAVE_SEM_OPEN 0)
- message(STATUS "Warning: sem_open not compilable")
- message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
- else()
- set(HAVE_SEM_OPEN 1)
- message(STATUS "sem_open is compilable")
- endif()
-
- # If we're not crosscompiling, we check by executing the program:
- if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
- execute_process(COMMAND ./sem_open
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_SEM_OPEN_run
- OUTPUT_VARIABLE var_compil
- )
- if (NOT HAVE_SEM_OPEN_run)
- set(HAVE_SEM_OPEN 1)
- message(STATUS "sem_open is executable")
+ try_run(semopen_retval semopen_compilable
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c
+ LINK_LIBRARIES pthread
+ COMPILE_OUTPUT_VARIABLE semopen_compilmsg
+ RUN_OUTPUT_VARIABLE semopen_runmsg)
+
+ if(semopen_compilable)
+ if(NOT semopen_retval) # error if not 0
+ message(STATUS "sem_open is compilable and executable")
+ set(HAVE_SEM_OPEN 1)
else()
- set(HAVE_SEM_OPEN 0)
- if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
- else()
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
- endif()
- message(STATUS "Warning: sem_open not executable")
- message(STATUS "Compilation output: '${var_compil}'")
- message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
+ message(STATUS "Warning: sem_open seems compilable but not executable")
+ message(STATUS "Compilation output: ${semopen_compilmsg}")
+ message(STATUS "Execution output: ${semopen_runmsg}")
+ message(STATUS "Exit value: ${semopen_retval}")
endif()
+ else()
+ message(STATUS "Warning: sem_open not compilable")
+ message(STATUS "Compilation output: ${semopen_compilmsg}")
endif()
- file(REMOVE sem_open)
- else()
- set(HAVE_SEM_OPEN 0)
+ unset(semopen_compilable)
+ unset(semopen_retval)
+ unset(semopen_runmsg)
+ unset(semopen_compilmsg)
endif()
+ set(HAVE_SEM_INIT 0)
+ if(NOT APPLE) # OS X El Capitan deprecates this function
+ CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
+ endif()
if(HAVE_SEM_INIT_LIB)
- execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_SEM_INIT_run
- OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
-
- # Test sem_init by compiling:
- if(HAVE_SEM_INIT_compil)
- set(HAVE_SEM_INIT 0)
- message(STATUS "Warning: sem_init not compilable")
- message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
- else()
- set(HAVE_SEM_INIT 1)
- message(STATUS "sem_init is compilable")
- endif()
-
- # If we're not crosscompiling, we check by executing the program:
- if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
- execute_process(COMMAND ./sem_init
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_SEM_INIT_run
- OUTPUT_VARIABLE var_compil
- )
- if (NOT HAVE_SEM_INIT_run)
- set(HAVE_SEM_INIT 1)
- message(STATUS "sem_init is executable")
+ try_run(seminit_retval seminit_compilable
+ ${CMAKE_BINARY_DIR}
+ ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c
+ LINK_LIBRARIES pthread
+ COMPILE_OUTPUT_VARIABLE seminit_compilmsg
+ RUN_OUTPUT_VARIABLE seminit_runmsg)
+
+ if(seminit_compilable)
+ if(NOT seminit_retval) # error if not 0
+ message(STATUS "sem_init is compilable and executable")
+ set(HAVE_SEM_INIT 1)
else()
- set(HAVE_SEM_INIT 0)
- if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
- else()
- message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
- endif()
- message(STATUS "Warning: sem_init not executable")
- message(STATUS "Compilation output: '${var_compil}'")
- message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
+ message(STATUS "Warning: sem_init seems compilable but not executable")
+ message(STATUS "Compilation output: ${seminit_compilmsg}")
+ message(STATUS "Execution output: ${seminit_runmsg}")
+ message(STATUS "Exit value: ${seminit_retval}")
endif()
+ else()
+ message(STATUS "Warning: sem_init not compilable")
+ message(STATUS "Compilation output: ${seminit_compilmsg}")
endif()
- file(REMOVE sem_init)
+ unset(seminit_compilable)
+ unset(seminit_retval)
+ unset(seminit_runmsg)
+ unset(seminit_compilmsg)
endif()
if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
- message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
+ message(FATAL_ERROR "Semaphores are not usable (failed to use both sem_open and sem_init), but they are mandatory to threads (you may need to mount /dev).")
endif()
set(HAVE_THREAD_CONTEXTS 1)
- message("-- Support for thread context factory ok.")
+ message(STATUS "Support for thread context factory ok.")
endif()
set(HAVE_UCONTEXT_CONTEXTS 0)
if(NOT HAVE_UCONTEXT_H)
- message("-- No ucontext factory: <ucontext.h> not found.")
+ message(STATUS "No ucontext factory: <ucontext.h> not found.")
elseif(APPLE)
- message("-- No ucontext factory: Apple don't want us to use them.")
+ message(STATUS "No ucontext factory: Apple don't want us to use them.")
set(HAVE_UCONTEXT_H 0)
else()
try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
#If can have both context
if(compile_makecontext)
set(HAVE_UCONTEXT_CONTEXTS 1)
- message("-- Support for ucontext factory ok.")
+ message(STATUS "Support for ucontext factory ok.")
else()
- message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
- message("-- No ucontext factory: makecontext() is not compilable.")
+ message(STATUS "Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
+ message(STATUS "No ucontext factory: makecontext() is not compilable.")
endif()
# Stack setup (size and address)
endif()
elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
+else()
+ set(GIT_VERSION "none, release version")
+endif()
+
+### Setup gcc & clang flags
+if (NOT MSVC)
+ include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
endif()
### Generate the required headers and scripts
#############################################
-# gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default,
-# but this too error prone. If you forget to include the config.h, you get weird segfaults.
-# If you include it everywhere, everything gets recompiled everytime.
-# So we include only where needed, and compile with -Wundef to notice the missing includes.
-# But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H).
-# So we have to make sure that everything got a decent value before generating the files.
-foreach(var HAVE_BACKTRACE HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP HAVE_NANOSLEEP HAVE_POPEN
- HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF
- HAVE_UCONTEXT_H HAVE_UNISTD_H HAVE_VALGRIND_H HAVE_VASPRINTF)
- if(${var})
- set(${var} 1)
- else()
- set(${var} 0)
- endif()
-endforeach()
-
# Avoid triggering a (full) rebuild by touching the files if they did not really change
configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
-configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid/config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated" @ONLY IMMEDIATE)
execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
-execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid/config.h)
file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
-file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
+file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated)
# We need two versions of the SMPI scripts because they contain the path to the library
# so, it depends of whether SimGrid is installed, or run from the sources (during the build)
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
endif()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
+set(SMPIMAIN ${libdir}/simgrid/smpimain)
configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
+#configure mpif.f90 to build mpi.mod
+if(SMPI_FORTRAN)
+ set(MODULE_MPIF_IN "module mpi")
+ set(MODULE_MPIF_OUT "end module mpi")
+ configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated @ONLY)
+ execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+ set(CMAKE_Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/include/smpi)
+ add_library(mpi SHARED ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+endif()
+
foreach(script cc cxx ff f90 run)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
endforeach()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
endif()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
+set(SMPIMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpimain)
foreach(script cc cxx ff f90 run)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
set(generated_headers_to_install
${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
- ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
+ ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h
)
set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
- configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allreduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_cluster ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_cluster COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_coll ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_coll COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources COPYONLY)
+
set(generated_files_to_clean
${generated_files_to_clean}
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
- ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/replay_multiple_manual.tesh
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty1
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time_and_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed1
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources
+ ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_nojob
)
endif()
include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
-### Setup gcc & clang flags
-if (NOT MSVC)
- include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
-endif()
-
### Make Libs
if(NOT WIN32)
include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
### Setup the distrib
include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
-### Build the doc (Windows downloads the doc instead of regenerating)
-#
-if(NOT WIN32)
- include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
-else()
- find_program(WGET_PROGRAM NAMES wget)
- message(STATUS "wget: ${WGET_PROGRAM}")
- if(WGET_PROGRAM)
- ADD_CUSTOM_TARGET(documentation
- COMMENT "Downloading the SimGrid documentation..."
- COMMAND ${WGET_PROGRAM} -r -np -nH -nd http://simgrid.gforge.inria.fr/simgrid/${release_version}/doc/
- WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/doc/html
- )
- endif()
-endif()
+### Build the docs if asked to
+include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
### Print the result of configuration
message("")
message(" ${line}")
endforeach()
message("##########################################")
-message("#### Content of simgrid_config.h ####")
+message("#### Content of simgrid/config.h ####")
message("##########################################")
-file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
+file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h config_output)
LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
foreach(line ${config_output})
message(" ${line}")
if(${Java_FOUND})
message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
message(" version .............: ${Java_VERSION_STRING}")
-if(${SWIG_FOUND})
- message(" SWIG ................: Version ${SWIG_VERSION} found.")
-else()
- message(" SWIG ................: Missing.")
-endif()
endif()
if(CMAKE_Fortran_COMPILER)
- message(" Compiler: Fortran ...........: ${CMAKE_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
+ message(" Compiler: Fortran ...........: ${SMPI_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
endif()
message(" Linker: .....................: ${CMAKE_LINKER}")
message(" with LTO ....................: ${enable_lto}")
message("")
-if (HAVE_NS3)
+if (SIMGRID_HAVE_NS3)
message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
else()
message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
else()
message(" Compile Java ................: NO")
endif()
-message(" Compile Lua .................: ${HAVE_LUA}")
+message(" Compile Lua .................: ${SIMGRID_HAVE_LUA}")
message(" Compile Smpi ................: ${HAVE_SMPI}")
message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
message("")
message(" Maintainer mode .............: ${enable_maintainer_mode}")
message(" Documentation................: ${enable_documentation}")
-message(" Model checking ..............: ${HAVE_MC}")
-message(" Jedule mode ................: ${HAVE_JEDULE}")
+message(" Model checking ..............: ${SIMGRID_HAVE_MC}")
+message(" Jedule mode ................: ${SIMGRID_HAVE_JEDULE}")
message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
message(" Mallocators .................: ${enable_mallocators}")
message("")