<platform version="3">
<AS id="AS0" routing="Full">
<!-- Multiple pstate processor capacities can be defined as a list of powers specified for a given host -->
- <!-- The enabled pstate can be set through the "pstate" attribute (lowest pstate corresponds to the highest processor power) -->
+ <!-- Attribute 'pstate' specifies the initialy selected pstate (here, the lowest pstate corresponds to the highest processor power) -->
<host id="MyHost1" power="100.0Mf,50.0Mf,20.0Mf" pstate="0" >
<!-- List of min_power:max_power pairs (in Watts) corresponding to the power consumed when the processor is idle and when it is fully loaded -->
<!-- The list must contain one power pair for each previously defined pstate-->
- <prop id="power_per_state" value="95.0:200.0, 93.0:170.0, 90.0:150.0" />
+ <prop id="watt_per_state" value="100.0:200.0, 93.0:170.0, 90.0:150.0" />
+ <prop id="watt_off" value="10" />
</host>
- <host id="MyHost2" power="100.0Mf" >
- <prop id="power_per_state" value="95.0:200.0" />
+ <host id="MyHost2" power="100.0Mf,50.0Mf,20.0Mf" pstate="0" >
+ <prop id="watt_per_state" value="100.0:200.0, 93.0:170.0, 90.0:150.0" />
+ <prop id="watt_off" value="10" />
+ </host>
+ <host id="MyHost3" power="100.0Mf,50.0Mf,20.0Mf" pstate="0" >
+ <prop id="watt_per_state" value="100.0:200.0, 93.0:170.0, 90.0:150.0" />
+ <prop id="watt_off" value="10" />
</host>
- <link id="link1" bandwidth="100kBps" latency="0"/>
- <route src="MyHost1" dst="MyHost2"><link_ctn id="link1"/></route>
+ <link id="bus" bandwidth="100kBps" latency="0"/>
+ <route src="MyHost1" dst="MyHost2"><link_ctn id="bus"/></route>
+ <route src="MyHost1" dst="MyHost3"><link_ctn id="bus"/></route>
+ <route src="MyHost2" dst="MyHost3"><link_ctn id="bus"/></route>
</AS>
</platform>
