##
## Check the C/C++ standard that we need
## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
-if (MSVC)
- message("-- You are compiling SimGrid with MicroSoft Visual C. Good luck.")
-
- set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D_SCL_SECURE_NO_WARNINGS")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_SCL_SECURE_NO_WARNINGS")
-else() # gcc or clang
- INCLUDE(CheckCCompilerFlag)
- CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
-
- ## Request full debugging flags
- set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
- set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
-
- if (CMAKE_COMPILER_IS_GNUCC)
- if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
- message(FATAL_ERROR
- "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
- "You need a sufficient support of c++11 to compile SimGrid.")
- endif()
+INCLUDE(CheckCCompilerFlag)
+CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
+
+## Request full debugging flags
+set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
+set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
+
+if (CMAKE_COMPILER_IS_GNUCC)
+ if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
+ message(FATAL_ERROR
+ "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
+ "You need a sufficient support of c++11 to compile SimGrid.")
endif()
+endif()
- ## We need a decent support of the c++11 standard
- include(CheckCXXCompilerFlag)
- CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
- if(COMPILER_SUPPORTS_CXX11)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
- else()
- message(FATAL_ERROR
- "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
- "Please use a decent C++ compiler.")
- endif()
+## We need a decent support of the c++11 standard
+include(CheckCXXCompilerFlag)
+CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
+if(COMPILER_SUPPORTS_CXX11)
+ set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
+else()
+ message(FATAL_ERROR
+ "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
+ "Please install a decent C++ compiler (remove CMakeCache.txt once it's installed).")
+endif()
- ### And we need C11 standard, too
- include(CheckCCompilerFlag)
- CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
- if(COMPILER_SUPPORTS_C11)
- set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
- else()
- message(FATAL_ERROR
- "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
- "Please use a decent C compiler "
- "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
- endif()
- if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
- ### gcc 4.[1-5] cannot compile ucontext on OSX
- message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
- set(HAVE_UCONTEXT_H 0)
- endif()
-endif() # NOT MSVC
+### And we need C11 standard, too
+include(CheckCCompilerFlag)
+CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
+if(COMPILER_SUPPORTS_C11)
+ set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
+else()
+ message(FATAL_ERROR
+ "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
+ "Please use a decent C compiler "
+ "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
+endif()
+if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
+ ### gcc 4.[1-5] cannot compile ucontext on OSX
+ message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
+ set(HAVE_UCONTEXT_H 0)
+endif()
+
+### Check threading support
+set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
+find_package(Threads)
+
+### Setup Options
+include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
### SMPI vs. Fortran
-if ((NOT DEFINED enable_smpi OR enable_smpi) AND NOT APPLE) # smpi is enabled by default
- # Call enable_language(Fortran) in order to load the build rules for
- # this language, needed by teshsuite/smpi/mpich-test/. Use
- # CMAKE_FORCE_Fortran_COMPILER to bypass checks for a working
- # compiler (smpiff don't exist at configure time).
- include(CMakeForceCompiler)
- if(NOT COMMAND CMAKE_FORCE_Fortran_COMPILER)
- MACRO(CMAKE_FORCE_Fortran_COMPILER compiler id)
- SET(CMAKE_Fortran_COMPILER "${compiler}")
- SET(CMAKE_Fortran_COMPILER_ID_RUN TRUE)
- SET(CMAKE_Fortran_COMPILER_ID ${id})
- SET(CMAKE_Fortran_COMPILER_WORKS TRUE)
- SET(CMAKE_Fortran_COMPILER_FORCED TRUE)
-
- # Set old compiler id variables.
- IF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
- SET(CMAKE_COMPILER_IS_GNUG77 1)
- ENDIF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
- ENDMACRO(CMAKE_FORCE_Fortran_COMPILER)
+if ((NOT DEFINED enable_smpi) OR enable_smpi)
+ # First unset the compiler in case we're re-running cmake over a previous
+ # configuration where it was saved as smpiff
+ unset(CMAKE_Fortran_COMPILER)
+
+ SET(SMPI_FORTRAN 0)
+ if(enable_fortran)
+ enable_language(Fortran OPTIONAL)
endif()
- CMAKE_FORCE_Fortran_COMPILER(smpiff smpiff)
- enable_language(Fortran OPTIONAL)
+
+ if(CMAKE_Fortran_COMPILER)
+
+ # Fortran compiler detected: save it, then replace by smpiff
+ set(SMPI_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
+
+ # Set flags/libs to be used in smpiff
+ if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
+ set(SMPI_Fortran_FLAGS "\"-fpic\" \"-ff2c\" \"-fno-second-underscore\"")
+ set(SMPI_Fortran_LIBS "\"-lgfortran\"")
+ elseif(CMAKE_Fortran_COMPILER_ID MATCHES "Intel")
+ set(SMPI_Fortran_FLAGS "\"-fPIC\" \"-nofor-main\"")
+ set(SMPI_Fortran_LIBS "\"-lifcore\"")
+ elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI|Flang") # flang
+ set(SMPI_Fortran_FLAGS "\"-fPIC\"")
+ set(SMPI_Fortran_LIBS "")
+ endif()
+
+ set(SMPI_FORTRAN 1)
+ endif(CMAKE_Fortran_COMPILER)
+
endif()
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
set(SIMGRID_VERSION_MAJOR "3")
-set(SIMGRID_VERSION_MINOR "13")
-set(SIMGRID_VERSION_PATCH "0")
-set(SIMGRID_VERSION_EXTRA "-devel") # Extra words to add to version string (e.g. -rc1)
+set(SIMGRID_VERSION_MINOR "19")
+set(SIMGRID_VERSION_PATCH "90")
+set(SIMGRID_VERSION_EXTRA "-DEVEL") # Extra words to add to version string (e.g. -rc1)
-set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
+set(SIMGRID_VERSION_DATE "2018") # Year for copyright information
if(${SIMGRID_VERSION_PATCH} EQUAL "0")
set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
endif()
set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
-set(SIMGRID_VERSION_BANNER "SIMGRID_VERSION_STRING\\nCopyright (c) 2004-${SIMGRID_VERSION_DATE}. The Simgrid Team.")
-if(release)
- set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nRelease build")
-else()
- set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nDevelopment build")
-endif()
set(libsimgrid_version "${release_version}")
set(libsimgrid-java_version "${release_version}")
### SET THE LIBRARY EXTENSION
-if(APPLE) #MAC
+if(APPLE)
set(LIB_EXE "dylib")
+elseif(WIN32)
+ set(LIB_EXE "a")
+ set(BIN_EXE ".exe")
else()
- if(WIN32) #WINDOWS
- set(LIB_EXE "a")
- set(BIN_EXE ".exe")
- else() #UNIX
- set(LIB_EXE "so")
- endif()
+ set(LIB_EXE "so")
endif()
-execute_process(COMMAND ${CMAKE_LINKER} --version
- OUTPUT_VARIABLE LINKER_VERSION)
+execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION ERROR_VARIABLE LINKER_VERSION)
string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
+### Set the library providing dlopen
+if("${CMAKE_SYSTEM}" MATCHES "Linux")
+ find_library(DL_LIBRARY dl)
+endif("${CMAKE_SYSTEM}" MATCHES "Linux")
+
### Find programs and paths
FIND_PROGRAM(GCOV_PATH gcov)
include(FindPerl)
message(FATAL_ERROR "Please install Perl to compile SimGrid.")
endif()
-if (APPLE)
- set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
- set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
+# tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
+set(PythonInterp_FIND_VERSION 3)
+set(PythonInterp_FIND_VERSION_COUNT 1)
+set(PythonInterp_FIND_VERSION_MAJOR 3)
+include(FindPythonInterp)
+if(NOT PYTHONINTERP_FOUND)
+ message(FATAL_ERROR "Please install Python (version 3 or higher).")
endif()
+
SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
### Compute the include paths
-set(INCLUDES
+
+# Only include public headers by default
+include_directories(
+ ${CMAKE_BINARY_DIR}/include
+ ${CMAKE_HOME_DIRECTORY}/include
+)
+
+# Compute the ones that should be added when compiling the library
+set(INTERNAL_INCLUDES
+ ${CMAKE_BINARY_DIR}
${CMAKE_HOME_DIRECTORY}
- ${CMAKE_HOME_DIRECTORY}/include
${CMAKE_HOME_DIRECTORY}/src/include
- ${CMAKE_BINARY_DIR}
- ${CMAKE_BINARY_DIR}/include
)
-if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
- set(INCLUDES ${INCLUDES} /usr/include/)
+if(enable_smpi)
+ set (INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_HOME_DIRECTORY}/src/smpi/include)
endif()
-### Check 32bits or 64bits
-IF(CMAKE_SIZEOF_VOID_P EQUAL 4)
- SET(ARCH_32_BITS 1)
-ELSE()
- SET(ARCH_32_BITS 0)
-ENDIF()
+if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
+ set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} /usr/include/)
+endif()
if(WIN32)
-
set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
- set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
+ set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_INCLUDE_WIN})
unset(CMAKE_INCLUDE_WIN)
-
endif()
-include_directories(${INCLUDES})
-
-### Setup Options
-include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
+# library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
+set(SIMGRID_DEP "-lm")
### Determine the assembly flavor that we need today
set(HAVE_RAW_CONTEXTS 0)
include(CMakeDetermineSystem)
IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
- IF(${ARCH_32_BITS})
+ IF(CMAKE_SIZEOF_VOID_P EQUAL 4) # 32 bits
message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
- set(PROCESSOR_i686 1)
- set(PROCESSOR_x86_64 0)
+ set(SIMGRID_PROCESSOR_i686 1)
+ set(SIMGRID_PROCESSOR_x86_64 0)
ELSE()
message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
- set(PROCESSOR_i686 0)
- set(PROCESSOR_x86_64 1)
+ set(SIMGRID_PROCESSOR_i686 0)
+ set(SIMGRID_PROCESSOR_x86_64 1)
ENDIF()
if (WIN32)
message(STATUS "Disable fast raw contexts on Windows.")
+ elseif(enable_address_sanitizer)
+ message(STATUS "Disable fast raw contexts with ASan")
else()
set(HAVE_RAW_CONTEXTS 1)
endif()
ELSE()
- set(PROCESSOR_i686 0)
- set(PROCESSOR_x86_64 0)
+ set(SIMGRID_PROCESSOR_i686 0)
+ set(SIMGRID_PROCESSOR_x86_64 0)
ENDIF()
include(CheckFunctionExists)
set(HAVE_GRAPHVIZ 0)
include(FindGraphviz)
-include(FindLibSigc++)
-set(HAVE_LUA 0)
+set(SIMGRID_HAVE_LUA 0)
if(enable_lua)
include(FindLuaSimgrid)
endif()
-set(HAVE_NS3 0)
+set(SIMGRID_HAVE_NS3 0)
if(enable_ns3)
include(FindNS3)
- if (NOT HAVE_NS3)
+ if (SIMGRID_HAVE_NS3)
+ set(SIMGRID_HAVE_NS3 1)
+ foreach(lib core csma point-to-point internet network applications)
+ set(SIMGRID_DEP "${SIMGRID_DEP} -lns${NS3_VERSION}-${lib}${NS3_SUFFIX}")
+ endforeach()
+ else()
message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
endif()
endif()
set(Boost_USE_STATIC_LIBS 1)
endif()
+set(HAVE_PAPI 0)
+if(enable_smpi_papi)
+ include(FindPAPI)
+ if (NOT HAVE_PAPI)
+ message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
+ endif()
+endif()
+
+# Not finding this is perfectly OK
+find_package(Boost COMPONENTS unit_test_framework)
+if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
+ message(STATUS "Enabling the Boost-based unit tests.")
+else()
+ message(STATUS "Disabling the Boost-based unit tests -- please install libboost-test-dev.")
+endif()
+
+
find_package(Boost 1.48)
if(Boost_FOUND)
include_directories(${Boost_INCLUDE_DIRS})
else()
if(APPLE)
- message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
+ message(FATAL_ERROR "Boost libraries not found. Try to install them with 'sudo fink install boost1.53.nopython' (check the exact name with 'fink list boost') or 'sudo brew install boost'")
else()
- message(FATAL_ERROR "Failed to find Boost libraries."
- "Did you install libboost-dev and libboost-context-dev?"
- "(libboost-context-dev is optional)")
+ message(FATAL_ERROR "Boost libraries not found. Install libboost-dev (>= 1.48.0).")
endif()
endif()
-# Try again to see if we have libboost-context
-find_package(Boost 1.42 COMPONENTS context)
-set(Boost_FOUND 1) # We don't care of whether this component is missing
-
-if(Boost_FOUND AND Boost_CONTEXT_FOUND)
- # We should use feature detection for this instead:
- if (Boost_VERSION LESS 105600)
- message("Found Boost.Context API v1")
- set(HAVE_BOOST_CONTEXTS 1)
- else()
- message("Found Boost.Context API v2")
- set(HAVE_BOOST_CONTEXTS 2)
- endif()
+find_package(Boost COMPONENTS context)
+set(Boost_FOUND 1) # This component is optional
+if(Boost_CONTEXT_FOUND)
+ message(STATUS "Found Boost.Context")
+ set(HAVE_BOOST_CONTEXTS 1)
else()
message (" boost : found.")
message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
endif()
# Checks for header libraries functions.
-CHECK_LIBRARY_EXISTS(execinfo backtrace "" HAVE_BACKTRACE_IN_LIBEXECINFO)
CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
-CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
-CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
+if(NOT APPLE) # OS X El Capitan deprecates this function
+ CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
+endif()
CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
set(HAVE_PTHREAD_SETAFFINITY 0)
CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
+CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
+CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
+CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
if(MINGW)
set(HAVE_THREAD_LOCAL_STORAGE 0)
endif()
-# Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
-IF(HAVE_MMAP AND
- NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND
- NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND
- NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND
- NOT "${CMAKE_SYSTEM}" MATCHES "Darwin")
- SET(HAVE_MMAP 0)
- message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
-ENDIF()
+CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
+CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
+if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
+ set(HAVE_SENDFILE 1)
+else()
+ set(HAVE_SENDFILE 0)
+endif()
+
+if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
+ message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
+ set(enable_model-checking FALSE)
+endif()
if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
SET(HAVE_MMALLOC 1)
else()
SET(HAVE_MMALLOC 0)
+ if(enable_model-checking)
+ message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
+ endif()
+ SET(enable_model-checking 0)
endif()
if(enable_jedule)
- set(HAVE_JEDULE 1)
+ set(SIMGRID_HAVE_JEDULE 1)
else()
- set(HAVE_JEDULE 0)
+ set(SIMGRID_HAVE_JEDULE 0)
endif()
if(enable_mallocators)
- SET(HAVE_MALLOCATOR 1)
+ SET(SIMGRID_HAVE_MALLOCATOR 1)
else()
- SET(HAVE_MALLOCATOR 0)
+ SET(SIMGRID_HAVE_MALLOCATOR 0)
endif()
-if(enable_model-checking AND HAVE_MMALLOC)
- SET(HAVE_MC 1)
- include(FindLibunwind)
- include(FindLibdw)
+include(FindLibunwind)
+if(HAVE_LIBUNWIND)
+ SET(SIMGRID_DEP "${SIMGRID_DEP} ${LIBUNWIND_LIBRARIES}")
else()
if(enable_model-checking)
- message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
+ message(FATAL_ERROR "Please install libunwind-dev libdw-dev libelf-dev libevent-dev if you want to compile the SimGrid model checker.")
endif()
- SET(HAVE_MC 0)
- SET(HAVE_MMALLOC 0)
+endif()
+
+if(enable_model-checking)
+ find_package(Libdw REQUIRED)
+ find_package(Libelf REQUIRED)
+ find_package(Libevent REQUIRED)
+ include_directories(${LIBDW_INCLUDE_DIR} ${LIBELF_INCLUDE_DIR} ${LIBEVENT_INCLUDE_DIR})
+ set(SIMGRID_DEP "${SIMGRID_DEP} ${LIBEVENT_LIBRARIES} ${LIBELF_LIBRARIES} ${LIBDW_LIBRARIES}")
+ set(SIMGRID_HAVE_MC 1)
+ if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_java)
+ message(WARNING "FreeBSD + Model-Checking + Java = too much for now. Disabling java")
+ set(enable_java FALSE)
+ endif()
+else()
+ SET(SIMGRID_HAVE_MC 0)
+ set(HAVE_MMALLOC 0)
+endif()
+mark_as_advanced(PATH_LIBDW_H)
+mark_as_advanced(PATH_LIBDW_LIB)
+
+if (enable_model-checking AND enable_ns3)
+ message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
endif()
if(enable_smpi)
- include(FindGFortran)
SET(HAVE_SMPI 1)
- if("${CMAKE_SYSTEM}" MATCHES "Linux")
+ if("${CMAKE_SYSTEM}" MATCHES "Darwin|FreeBSD|Linux")
SET(USE_LIBUTIL 0)
SET(HAVE_PRIVATIZATION 1)
- elseif("${CMAKE_SYSTEM}" MATCHES "^FreeBSD")
- SET(USE_LIBUTIL 0)
- SET(HAVE_PRIVATIZATION 0)
else()
message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
SET(HAVE_PRIVATIZATION 0)
### Check for GNU dynamic linker
CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
if (HAVE_DLFCN_H)
- execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c -ldl -o test_gnu_ld
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- OUTPUT_VARIABLE HAVE_GNU_LD_compil
- )
- if(HAVE_GNU_LD_compil)
- set(HAVE_GNU_LD 0)
- message(STATUS "Warning: test program toward GNU ld failed to compile:")
- message(STATUS "${HAVE_GNU_LD_comp_output}")
+ execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ OUTPUT_VARIABLE HAVE_GNU_LD_compil
+ )
+ if(HAVE_GNU_LD_compil)
+ set(HAVE_GNU_LD 0)
+ message(STATUS "Warning: test program toward GNU ld failed to compile:")
+ message(STATUS "${HAVE_GNU_LD_comp_output}")
+ else()
+ execute_process(COMMAND ./test_gnu_ld
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ RESULT_VARIABLE HAVE_GNU_LD_run
+ OUTPUT_VARIABLE var_exec
+ )
+
+ if(NOT HAVE_GNU_LD_run)
+ set(HAVE_GNU_LD 1)
+ message(STATUS "We are using GNU dynamic linker")
else()
-
- execute_process(COMMAND ./test_gnu_ld
- WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
- RESULT_VARIABLE HAVE_GNU_LD_run
- OUTPUT_VARIABLE var_exec
- )
-
- if(NOT HAVE_GNU_LD_run)
- set(HAVE_GNU_LD 1)
- message(STATUS "We are using GNU dynamic linker")
- else()
- set(HAVE_GNU_LD 0)
- message(STATUS "Warning: error while checking for GNU ld:")
- message(STATUS "Test output: '${var_exec}'")
- message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
- endif()
- file(REMOVE test_gnu_ld)
+ set(HAVE_GNU_LD 0)
+ message(STATUS "Warning: error while checking for GNU ld:")
+ message(STATUS "Test output: '${var_exec}'")
+ message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
endif()
+ file(REMOVE test_gnu_ld)
+ endif()
endif()
-
#--------------------------------------------------------------------------------------------------
### Initialize of CONTEXT THREADS
set(HAVE_THREAD_CONTEXTS 0)
-
-if(HAVE_PTHREAD)
+if(CMAKE_USE_PTHREADS_INIT)
### Test that we have a way to create semaphores
if(HAVE_SEM_OPEN_LIB)
endif()
endif()
file(REMOVE sem_open)
-
else()
set(HAVE_SEM_OPEN 0)
endif()
endif()
endif()
file(REMOVE sem_init)
+ else()
+ set(HAVE_SEM_INIT 0)
endif()
if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
endif()
set(HAVE_THREAD_CONTEXTS 1)
- message("-- Support for thread context factory ok.")
+ message(STATUS "Support for thread context factory ok.")
endif()
-
set(HAVE_UCONTEXT_CONTEXTS 0)
if(NOT HAVE_UCONTEXT_H)
- message("-- No ucontext factory: <ucontext.h> not found.")
+ message(STATUS "No ucontext factory: <ucontext.h> not found.")
elseif(APPLE)
- message("-- No ucontext factory: Apple don't want us to use them.")
+ message(STATUS "No ucontext factory: Apple don't want us to use them.")
set(HAVE_UCONTEXT_H 0)
+elseif(enable_address_sanitizer)
+ message(STATUS "No ucontext factory: ASan does not support it (see http://code.google.com/p/address-sanitizer/issues/detail?id=189)")
else()
try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
OUTPUT_VARIABLE compile_makecontext_output)
-
+
#If can have both context
if(compile_makecontext)
set(HAVE_UCONTEXT_CONTEXTS 1)
- message("-- Support for ucontext factory ok.")
+ message(STATUS "Support for ucontext factory ok.")
else()
- message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
- message("-- No ucontext factory: makecontext() is not compilable.")
+ message(STATUS "Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
+ message(STATUS "No ucontext factory: makecontext() is not compilable.")
endif()
# Stack setup (size and address)
OUTPUT_VARIABLE GIT_VERSION
OUTPUT_STRIP_TRAILING_WHITESPACE)
message(STATUS "Git version: ${GIT_VERSION}")
-
+
execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
OUTPUT_VARIABLE GIT_DATE
OUTPUT_STRIP_TRAILING_WHITESPACE)
message(STATUS "Git date: ${GIT_DATE}")
string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
-
+
execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
OUTPUT_VARIABLE SIMGRID_GITHASH
endif()
elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
+else()
+ set(GIT_VERSION "none, release version")
endif()
-if(GIT_VERSION)
- set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} at commit ${GIT_VERSION}")
-endif()
-if(GIT_DATE)
- set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} (${GIT_DATE})")
+### Setup gcc & clang flags
+if (NOT MSVC)
+ include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
endif()
### Generate the required headers and scripts
#############################################
-# gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default,
-# but this too error prone. If you forget to include the config.h, you get weird segfaults.
-# If you include it everywhere, everything gets recompiled everytime.
-# So we include only where needed, and compile with -Wundef to notice the missing includes.
-# But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H).
-# So we have to make sure that everything got a decent value before generating the files.
-foreach(var HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP
- HAVE_NANOSLEEP HAVE_POPEN HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H
- HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF HAVE_UCONTEXT_H HAVE_UNISTD_H
- HAVE_VALGRIND_H HAVE_VASPRINTF)
- if(${var})
- set(${var} 1)
- else()
- set(${var} 0)
- endif()
-endforeach()
-
# Avoid triggering a (full) rebuild by touching the files if they did not really change
configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
endif()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
+set(SMPIMAIN smpimain)
configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
+#configure mpif.f90 to build mpi.mod
+if(SMPI_FORTRAN)
+ set(MODULE_MPIF_IN "module mpi")
+ set(MODULE_MPIF_OUT "end module mpi")
+ configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated @ONLY)
+ execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+ set(CMAKE_Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/include/smpi)
+ add_library(mpi SHARED ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+endif()
+
foreach(script cc cxx ff f90 run)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
endforeach()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
endif()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
+set(SMPIMAIN ${CMAKE_BINARY_DIR}/bin/smpimain)
foreach(script cc cxx ff f90 run)
configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
)
-set(generated_headers
- ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h
- )
+set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
set(generated_files_to_clean
${generated_headers}
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
-
+ configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_cluster ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_cluster COPYONLY)
+ configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile_coll ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile_coll COPYONLY)
+
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
-### Setup gcc & clang flags
-if (NOT MSVC)
- include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
-endif()
-
### Make Libs
if(NOT WIN32)
include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
### Setup the distrib
include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
-### Build the doc (Windows downloads the doc instead of regenerating)
-#
-if(NOT WIN32)
- include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
-else()
- find_program(WGET_PROGRAM NAMES wget)
- message(STATUS "wget: ${WGET_PROGRAM}")
- if(WGET_PROGRAM)
- ADD_CUSTOM_TARGET(documentation
- COMMENT "Downloading the SimGrid documentation..."
- COMMAND ${WGET_PROGRAM} -r -np -nH -nd http://simgrid.gforge.inria.fr/simgrid/${release_version}/doc/
- WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/doc/html
- )
- endif()
-endif()
+### Build the docs if asked to
+include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
### Print the result of configuration
message("")
if(${Java_FOUND})
message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
message(" version .............: ${Java_VERSION_STRING}")
-if(${SWIG_FOUND})
- message(" SWIG ................: Version ${SWIG_VERSION} found.")
-else()
- message(" SWIG ................: Missing.")
-endif()
endif()
if(CMAKE_Fortran_COMPILER)
- message(" Compiler: Fortran ...........: ${CMAKE_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
+ message(" Compiler: Fortran ...........: ${SMPI_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
endif()
message(" Linker: .....................: ${CMAKE_LINKER}")
message(" with LTO ....................: ${enable_lto}")
message("")
-if (HAVE_NS3)
+if (SIMGRID_HAVE_NS3)
message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
else()
message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
else()
message(" Compile Java ................: NO")
endif()
-message(" Compile Lua .................: ${HAVE_LUA}")
+message(" Compile Lua .................: ${SIMGRID_HAVE_LUA}")
message(" Compile Smpi ................: ${HAVE_SMPI}")
message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
message(" Privatization .............: ${HAVE_PRIVATIZATION}")
+message(" PAPI support...............: ${HAVE_PAPI}")
message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
message("")
message(" Maintainer mode .............: ${enable_maintainer_mode}")
message(" Documentation................: ${enable_documentation}")
-message(" Model checking ..............: ${HAVE_MC}")
-message(" Jedule mode ................: ${HAVE_JEDULE}")
+message(" Model checking ..............: ${SIMGRID_HAVE_MC}")
+message(" Jedule mode ................: ${SIMGRID_HAVE_JEDULE}")
message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
-message(" Sigc++ mode .................: ${SIMGRID_HAVE_LIBSIG}")
message(" Mallocators .................: ${enable_mallocators}")
message("")
message(" Simgrid dependencies ........: ${SIMGRID_DEP}")