static XBT_INLINE void _sanity_check_dynar(xbt_dynar_t dynar)
{
- xbt_assert0(dynar, "dynar is NULL");
+ xbt_assert(dynar, "dynar is NULL");
}
static XBT_INLINE void _sanity_check_idx(int idx)
{
- xbt_assert1(idx >= 0, "dynar idx(=%d) < 0", (int) (idx));
+ xbt_assert(idx >= 0, "dynar idx(=%d) < 0", (int) (idx));
}
static XBT_INLINE void _check_inbound_idx(xbt_dynar_t dynar, int idx)
{
if (idx < 0 || idx >= dynar->used) {
_dynar_unlock(dynar);
- THROW2(bound_error, idx,
+ THROWF(bound_error, idx,
"dynar is not that long. You asked %d, but it's only %lu long",
(int) (idx), (unsigned long) dynar->used);
}
{
if (idx > dynar->used) {
_dynar_unlock(dynar);
- THROW2(bound_error, idx,
+ THROWF(bound_error, idx,
"dynar is not that long. You asked %d, but it's only %lu long (could have been equal to it)",
(int) (idx), (unsigned long) dynar->used);
}
{
if (dynar->used == 0) {
_dynar_unlock(dynar);
- THROW1(bound_error, 0, "dynar %p is empty", dynar);
+ THROWF(bound_error, 0, "dynar %p is empty", dynar);
}
}
const unsigned long old_size = dynar->size;
if (nb > old_size) {
- char *const old_data = (char *) dynar->data;
-
+ void *const old_data = dynar->data;
const unsigned long elmsize = dynar->elmsize;
+ const unsigned long old_length = old_size * elmsize;
- const unsigned long used = dynar->used;
- const unsigned long used_length = used * elmsize;
-
- const unsigned long new_size =
- nb > (2 * (old_size + 1)) ? nb : (2 * (old_size + 1));
+ const unsigned long expand = 2 * (old_size + 1);
+ const unsigned long new_size = (nb > expand ? nb : expand);
const unsigned long new_length = new_size * elmsize;
- char *const new_data = (char *) xbt_malloc0(elmsize * new_size);
-
- DEBUG3("expand %p from %lu to %lu elements", (void *) dynar,
- (unsigned long) old_size, nb);
+ void *const new_data = xbt_realloc(old_data, new_length);
- if (old_data) {
- memcpy(new_data, old_data, used_length);
- free(old_data);
- }
-
- _xbt_clear_mem(new_data + used_length, new_length - used_length);
+ XBT_DEBUG("expand %p from %lu to %lu elements", dynar, old_size, new_size);
dynar->size = new_size;
dynar->data = new_data;
if (dynar->elmsize <= SIZEOF_MAX) {
char elm[SIZEOF_MAX];
_xbt_dynar_get_elm(elm, dynar, idx);
- (*dynar->free_f) (elm);
+ dynar->free_f(elm);
} else {
char *elm = malloc(dynar->elmsize);
_xbt_dynar_get_elm(elm, dynar, idx);
- (*dynar->free_f) (elm);
+ dynar->free_f(elm);
free(elm);
}
}
void xbt_dynar_dump(xbt_dynar_t dynar)
{
- INFO5("Dynar dump: size=%lu; used=%lu; elmsize=%lu; data=%p; free_f=%p",
+ XBT_INFO("Dynar dump: size=%lu; used=%lu; elmsize=%lu; data=%p; free_f=%p",
dynar->size, dynar->used, dynar->elmsize, dynar->data,
dynar->free_f);
}
void xbt_dynar_free_container(xbt_dynar_t * dynar)
{
if (dynar && *dynar) {
-
- if ((*dynar)->data) {
- _xbt_clear_mem((*dynar)->data, (*dynar)->size);
- free((*dynar)->data);
- }
-
- if ((*dynar)->mutex)
- xbt_mutex_destroy((*dynar)->mutex);
-
- _xbt_clear_mem(*dynar, sizeof(s_xbt_dynar_t));
-
- free(*dynar);
+ xbt_dynar_t d = *dynar;
+ free(d->data);
+ if (d->mutex)
+ xbt_mutex_destroy(d->mutex);
+ free(d);
*dynar = NULL;
}
}
_sanity_check_dynar(dynar);
- DEBUG1("Reset the dynar %p", (void *) dynar);
+ XBT_DEBUG("Reset the dynar %p", (void *) dynar);
if (dynar->free_f) {
_dynar_map(dynar, dynar->free_f);
}
- /*
- if (dynar->data)
- free(dynar->data);
-
- dynar->size = 0;
- */
dynar->used = 0;
_dynar_unlock(dynar);
-
- /* dynar->data = NULL; */
}
/**
/** \brief free a dynar passed as void* (handy to store dynar in dynars or dict) */
void xbt_dynar_free_voidp(void *d)
{
- xbt_dynar_free((xbt_dynar_t *) d);
+ xbt_dynar_t dynar = (xbt_dynar_t)d;
+ xbt_dynar_free(&dynar);
}
/** @brief Count of dynar's elements
return res;
}
-XBT_INLINE void *xbt_dynar_set_at_ptr(const xbt_dynar_t dynar,
- const unsigned long idx)
+/* not synchronized */
+static XBT_INLINE void *_xbt_dynar_set_at_ptr(const xbt_dynar_t dynar,
+ const unsigned long idx)
{
-
- void *res;
- _dynar_lock(dynar);
_sanity_check_dynar(dynar);
- _xbt_dynar_expand(dynar, idx + 1);
-
if (idx >= dynar->used) {
+ _xbt_dynar_expand(dynar, idx + 1);
_xbt_clear_mem(((char * const)dynar->data) + dynar->used * dynar->elmsize,
(idx + 1 - dynar->used)*dynar->elmsize);
dynar->used = idx + 1;
}
-
- _dynar_unlock(dynar);
-
- res = _xbt_dynar_elm(dynar, idx);
+ return _xbt_dynar_elm(dynar, idx);
+}
+XBT_INLINE void *xbt_dynar_set_at_ptr(const xbt_dynar_t dynar,
+ const unsigned long idx)
+{
+ void *res;
+ _dynar_lock(dynar);
+ res = _xbt_dynar_set_at_ptr(dynar, idx);
+ _dynar_unlock(dynar);
return res;
}
_xbt_dynar_set(xbt_dynar_t dynar,
const unsigned long idx, const void *const src)
{
-
- _sanity_check_dynar(dynar);
-
- _xbt_dynar_expand(dynar, idx + 1);
-
- if (idx >= dynar->used) {
- _xbt_clear_mem(((char * const)dynar->data) + dynar->used * dynar->elmsize,
- (idx + 1 - dynar->used)*dynar->elmsize);
- dynar->used = idx + 1;
- }
-
- _xbt_dynar_put_elm(dynar, idx, src);
+ memcpy(_xbt_dynar_set_at_ptr(dynar, idx), src, dynar->elmsize);
}
/** @brief Set the Nth element of a dynar (expanded if needed). Previous value at this position is NOT freed
if (idx < dynar->used && dynar->free_f) {
void *const old_object = _xbt_dynar_elm(dynar, idx);
- (*(dynar->free_f)) (old_object);
+ dynar->free_f(old_object);
}
_xbt_dynar_set(dynar, idx, object);
}
_dynar_unlock(dynar);
- THROW2(not_found_error, 0, "Element %p not part of dynar %p", elem,
+ THROWF(not_found_error, 0, "Element %p not part of dynar %p", elem,
dynar);
}
TRY {
xbt_dynar_search(dynar, elem);
- } CATCH(e) {
+ }
+ CATCH(e) {
if (e.category == not_found_error) {
xbt_ex_free(e);
return 0;
_dynar_lock(dynar);
_check_populated_dynar(dynar);
- DEBUG1("Pop %p", (void *) dynar);
+ XBT_DEBUG("Pop %p", (void *) dynar);
dynar->used--;
res = _xbt_dynar_elm(dynar, dynar->used);
_dynar_unlock(dynar);
{
/* sanity checks done by remove_at */
- DEBUG1("Pop %p", (void *) dynar);
+ XBT_DEBUG("Pop %p", (void *) dynar);
_dynar_lock(dynar);
_xbt_dynar_remove_at(dynar, dynar->used - 1, dst);
_dynar_unlock(dynar);
static void _dynar_map(const xbt_dynar_t dynar, void_f_pvoid_t const op)
{
- char elm[SIZEOF_MAX];
+ char *const data = (char *) dynar->data;
+ const unsigned long elmsize = dynar->elmsize;
const unsigned long used = dynar->used;
- unsigned long i = 0;
+ unsigned long i;
for (i = 0; i < used; i++) {
- _xbt_dynar_get_elm(elm, dynar, i);
- (*op) (elm);
+ char* elm = (char*) data + i * elmsize;
+ op(elm);
}
}
_dynar_lock(dynar);
+#ifdef HAVE_MERGESORT
+ mergesort(dynar->data, dynar->used, dynar->elmsize, compar_fn);
+#else
qsort(dynar->data, dynar->used, dynar->elmsize, compar_fn);
-
+#endif
_dynar_unlock(dynar);
}
+/** @brief Transform a dynar into a NULL terminated array
+ *
+ * \param dynar the dynar to transform
+ */
+XBT_INLINE void * xbt_dynar_to_array (xbt_dynar_t dynar)
+{
+ void * res;
+ void * last = xbt_new0(char,dynar->elmsize);
+ xbt_dynar_push(dynar, last);
+ free(last);
+ res = dynar->data;
+ free(dynar);
+ return res;
+}
+
/*
* Return 0 if d1 and d2 are equal and 1 if not equal
*/
if((!d1) && (!d2)) return 0;
if((!d1) || (!d2))
{
- DEBUG2("NULL dynar d1=%p d2=%p",d1,d2);
+ XBT_DEBUG("NULL dynar d1=%p d2=%p",d1,d2);
+ xbt_dynar_free(&d2);
return 1;
}
if((d1->elmsize)!=(d2->elmsize))
{
- DEBUG2("Size of elmsize d1=%ld d2=%ld",d1->elmsize,d2->elmsize);
+ XBT_DEBUG("Size of elmsize d1=%ld d2=%ld",d1->elmsize,d2->elmsize);
+ xbt_dynar_free(&d2);
return 1; // xbt_die
}
if(xbt_dynar_length(d1) != xbt_dynar_length(d2))
{
- DEBUG2("Size of dynar d1=%ld d2=%ld",xbt_dynar_length(d1),xbt_dynar_length(d2));
+ XBT_DEBUG("Size of dynar d1=%ld d2=%ld",xbt_dynar_length(d1),xbt_dynar_length(d2));
+ xbt_dynar_free(&d2);
return 1;
}
{
void *data1 = xbt_dynar_get_as(d1, i, void *);
void *data2 = xbt_dynar_get_as(d2, i, void *);
- DEBUG3("link[%d] d1=%p d2=%p",i,data1,data2);
- if(compar(data1,data2)) return 1;
+ XBT_DEBUG("link[%d] d1=%p d2=%p",i,data1,data2);
+ if(compar(data1,data2)){
+ xbt_dynar_free(&d2);
+ return 1;
+ }
}
+ xbt_dynar_free(&d2);
return 0;
}
unsigned int cursor;
int *iptr;
- xbt_test_add0("==== Traverse the empty dynar");
+ xbt_test_add("==== Traverse the empty dynar");
d = xbt_dynar_new(sizeof(int), NULL);
xbt_dynar_foreach(d, cursor, i) {
- xbt_assert0(0, "Damnit, there is something in the empty dynar");
+ xbt_die( "Damnit, there is something in the empty dynar");
}
xbt_dynar_free(&d); /* This code is used both as example and as regression test, so we try to */
xbt_dynar_free(&d); /* free the struct twice here to check that it's ok, but freeing it only once */
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add1
+ xbt_test_add
("==== Push %d int, set them again 3 times, traverse them, shift them",
NB_ELEM);
/* Populate_ints [doxygen cruft] */
for (cpt = 0; cpt < NB_ELEM; cpt++) {
xbt_dynar_push_as(d, int, cpt); /* This is faster (and possible only with scalars) */
/* xbt_dynar_push(d,&cpt); This would also work */
- xbt_test_log2("Push %d, length=%lu", cpt, xbt_dynar_length(d));
+ xbt_test_log("Push %d, length=%lu", cpt, xbt_dynar_length(d));
}
/* 2. Traverse manually the dynar */
for (cursor = 0; cursor < NB_ELEM; cursor++) {
iptr = xbt_dynar_get_ptr(d, cursor);
- xbt_test_assert2(cursor == *iptr,
+ xbt_test_assert(cursor == *iptr,
"The retrieved value is not the same than the injected one (%d!=%d)",
cursor, cpt);
}
/* 3. Traverse the dynar using the neat macro to that extend */
xbt_dynar_foreach(d, cursor, cpt) {
- xbt_test_assert2(cursor == cpt,
+ xbt_test_assert(cursor == cpt,
"The retrieved value is not the same than the injected one (%d!=%d)",
cursor, cpt);
}
cpt = 0;
xbt_dynar_foreach(d, cursor, i) {
- xbt_test_assert2(i == cpt,
+ xbt_test_assert(i == cpt,
"The retrieved value is not the same than the injected one (%d!=%d)",
i, cpt);
cpt++;
}
- xbt_test_assert2(cpt == NB_ELEM,
+ xbt_test_assert(cpt == NB_ELEM,
"Cannot retrieve my %d values. Last got one is %d",
NB_ELEM, cpt);
/* 4. Shift all the values */
for (cpt = 0; cpt < NB_ELEM; cpt++) {
xbt_dynar_shift(d, &i);
- xbt_test_assert2(i == cpt,
+ xbt_test_assert(i == cpt,
"The retrieved value is not the same than the injected one (%d!=%d)",
i, cpt);
- xbt_test_log2("Pop %d, length=%lu", cpt, xbt_dynar_length(d));
+ xbt_test_log("Pop %d, length=%lu", cpt, xbt_dynar_length(d));
}
/* 5. Free the resources */
xbt_dynar_free(&d); /* free the struct twice here to check that it's ok, but freeing it only once */
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add1("==== Unshift/pop %d int", NB_ELEM);
+ xbt_test_add("==== Unshift/pop %d int", NB_ELEM);
d = xbt_dynar_new(sizeof(int), NULL);
for (cpt = 0; cpt < NB_ELEM; cpt++) {
xbt_dynar_unshift(d, &cpt);
- DEBUG2("Push %d, length=%lu", cpt, xbt_dynar_length(d));
+ XBT_DEBUG("Push %d, length=%lu", cpt, xbt_dynar_length(d));
}
for (cpt = 0; cpt < NB_ELEM; cpt++) {
i = xbt_dynar_pop_as(d, int);
- xbt_test_assert2(i == cpt,
+ xbt_test_assert(i == cpt,
"The retrieved value is not the same than the injected one (%d!=%d)",
i, cpt);
- xbt_test_log2("Pop %d, length=%lu", cpt, xbt_dynar_length(d));
+ xbt_test_log("Pop %d, length=%lu", cpt, xbt_dynar_length(d));
}
xbt_dynar_free(&d); /* This code is used both as example and as regression test, so we try to */
xbt_dynar_free(&d); /* free the struct twice here to check that it's ok, but freeing it only once */
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add1
+ xbt_test_add
("==== Push %d int, insert 1000 int in the middle, shift everything",
NB_ELEM);
d = xbt_dynar_new(sizeof(int), NULL);
for (cpt = 0; cpt < NB_ELEM; cpt++) {
xbt_dynar_push_as(d, int, cpt);
- DEBUG2("Push %d, length=%lu", cpt, xbt_dynar_length(d));
+ XBT_DEBUG("Push %d, length=%lu", cpt, xbt_dynar_length(d));
}
for (cpt = 0; cpt < NB_ELEM/5; cpt++) {
xbt_dynar_insert_at_as(d, NB_ELEM/2, int, cpt);
- DEBUG2("Push %d, length=%lu", cpt, xbt_dynar_length(d));
+ XBT_DEBUG("Push %d, length=%lu", cpt, xbt_dynar_length(d));
}
for (cpt = 0; cpt < NB_ELEM/2; cpt++) {
xbt_dynar_shift(d, &i);
- xbt_test_assert2(i == cpt,
+ xbt_test_assert(i == cpt,
"The retrieved value is not the same than the injected one at the begining (%d!=%d)",
i, cpt);
- DEBUG2("Pop %d, length=%lu", cpt, xbt_dynar_length(d));
+ XBT_DEBUG("Pop %d, length=%lu", cpt, xbt_dynar_length(d));
}
for (cpt = 999; cpt >= 0; cpt--) {
xbt_dynar_shift(d, &i);
- xbt_test_assert2(i == cpt,
+ xbt_test_assert(i == cpt,
"The retrieved value is not the same than the injected one in the middle (%d!=%d)",
i, cpt);
}
for (cpt = 2500; cpt < NB_ELEM; cpt++) {
xbt_dynar_shift(d, &i);
- xbt_test_assert2(i == cpt,
+ xbt_test_assert(i == cpt,
"The retrieved value is not the same than the injected one at the end (%d!=%d)",
i, cpt);
}
xbt_dynar_free(&d); /* free the struct twice here to check that it's ok, but freeing it only once */
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add1("==== Push %d int, remove 2000-4000. free the rest",
+ xbt_test_add("==== Push %d int, remove 2000-4000. free the rest",
NB_ELEM);
d = xbt_dynar_new(sizeof(int), NULL);
for (cpt = 0; cpt < NB_ELEM; cpt++)
for (cpt = 2000; cpt < 4000; cpt++) {
xbt_dynar_remove_at(d, 2000, &i);
- xbt_test_assert2(i == cpt,
+ xbt_test_assert(i == cpt,
"Remove a bad value. Got %d, expected %d", i, cpt);
- DEBUG2("remove %d, length=%lu", cpt, xbt_dynar_length(d));
+ XBT_DEBUG("remove %d, length=%lu", cpt, xbt_dynar_length(d));
}
xbt_dynar_free(&d); /* This code is used both as example and as regression test, so we try to */
xbt_dynar_free(&d); /* free the struct twice here to check that it's ok, but freeing it only once */
/*******************************************************************************/
XBT_TEST_UNIT("insert",test_dynar_insert,"Using the xbt_dynar_insert and xbt_dynar_remove functions")
{
- xbt_dynar_t d = xbt_dynar_new(sizeof(int), NULL);
+ xbt_dynar_t d = xbt_dynar_new(sizeof(unsigned int), NULL);
unsigned int cursor;
int cpt;
- xbt_test_add1("==== Insert %d int, traverse them, remove them",NB_ELEM);
+ xbt_test_add("==== Insert %d int, traverse them, remove them",NB_ELEM);
/* Populate_ints [doxygen cruft] */
/* 1. Populate the dynar */
for (cpt = 0; cpt < NB_ELEM; cpt++) {
xbt_dynar_insert_at(d, cpt, &cpt);
- xbt_test_log2("Push %d, length=%lu", cpt, xbt_dynar_length(d));
+ xbt_test_log("Push %d, length=%lu", cpt, xbt_dynar_length(d));
}
/* 3. Traverse the dynar */
xbt_dynar_foreach(d, cursor, cpt) {
- xbt_test_assert2(cursor == cpt,
+ xbt_test_assert(cursor == cpt,
"The retrieved value is not the same than the injected one (%d!=%d)",
cursor, cpt);
}
for (cpt = 0; cpt < NB_ELEM; cpt++)
xbt_dynar_set_as(d, cpt, int, cpt);
xbt_dynar_foreach(d, cursor, cpt)
- xbt_test_assert2(cursor == cpt,
+ xbt_test_assert(cursor == cpt,
"The retrieved value is not the same than the injected one (%d!=%d)",
cursor, cpt);
for (cpt = 0; cpt < NB_ELEM; cpt++) {
int val;
xbt_dynar_remove_at(d,0,&val);
- xbt_test_assert2(cpt == val,
+ xbt_test_assert(cpt == val,
"The retrieved value is not the same than the injected one (%d!=%d)",
cursor, cpt);
}
- xbt_test_assert1(xbt_dynar_length(d) == 0,
+ xbt_test_assert(xbt_dynar_is_empty(d),
"There is still %lu elements in the dynar after removing everything",
xbt_dynar_length(d));
xbt_dynar_free(&d);
/* ********************* */
- xbt_test_add1("==== Insert %d int in reverse order, traverse them, remove them",NB_ELEM);
+ xbt_test_add("==== Insert %d int in reverse order, traverse them, remove them",NB_ELEM);
d = xbt_dynar_new(sizeof(int), NULL);
for (cpt = NB_ELEM-1; cpt >=0; cpt--) {
xbt_dynar_replace(d, cpt, &cpt);
- xbt_test_log2("Push %d, length=%lu", cpt, xbt_dynar_length(d));
+ xbt_test_log("Push %d, length=%lu", cpt, xbt_dynar_length(d));
}
/* 3. Traverse the dynar */
xbt_dynar_foreach(d, cursor, cpt) {
- xbt_test_assert2(cursor == cpt,
+ xbt_test_assert(cursor == cpt,
"The retrieved value is not the same than the injected one (%d!=%d)",
cursor, cpt);
}
for (cpt =NB_ELEM-1; cpt >=0; cpt--) {
int val;
xbt_dynar_remove_at(d,xbt_dynar_length(d)-1,&val);
- xbt_test_assert2(cpt == val,
+ xbt_test_assert(cpt == val,
"The retrieved value is not the same than the injected one (%d!=%d)",
cursor, cpt);
}
- xbt_test_assert1(xbt_dynar_length(d) == 0,
+ xbt_test_assert(xbt_dynar_is_empty(d),
"There is still %lu elements in the dynar after removing everything",
xbt_dynar_length(d));
xbt_dynar_free(&d);
unsigned int cursor;
double d1, d2;
- xbt_test_add0("==== Traverse the empty dynar");
+ xbt_test_add("==== Traverse the empty dynar");
d = xbt_dynar_new(sizeof(int), NULL);
xbt_dynar_foreach(d, cursor, cpt) {
- xbt_test_assert0(FALSE,
+ xbt_test_assert(FALSE,
"Damnit, there is something in the empty dynar");
}
xbt_dynar_free(&d); /* This code is used both as example and as regression test, so we try to */
xbt_dynar_free(&d); /* free the struct twice here to check that it's ok, but freeing it only once */
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add0("==== Push/shift 5000 doubles");
+ xbt_test_add("==== Push/shift 5000 doubles");
d = xbt_dynar_new(sizeof(double), NULL);
for (cpt = 0; cpt < 5000; cpt++) {
d1 = (double) cpt;
}
xbt_dynar_foreach(d, cursor, d2) {
d1 = (double) cursor;
- xbt_test_assert2(d1 == d2,
+ xbt_test_assert(d1 == d2,
"The retrieved value is not the same than the injected one (%f!=%f)",
d1, d2);
}
for (cpt = 0; cpt < 5000; cpt++) {
d1 = (double) cpt;
xbt_dynar_shift(d, &d2);
- xbt_test_assert2(d1 == d2,
+ xbt_test_assert(d1 == d2,
"The retrieved value is not the same than the injected one (%f!=%f)",
d1, d2);
}
xbt_dynar_free(&d); /* free the struct twice here to check that it's ok, but freeing it only once */
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add0("==== Unshift/pop 5000 doubles");
+ xbt_test_add("==== Unshift/pop 5000 doubles");
d = xbt_dynar_new(sizeof(double), NULL);
for (cpt = 0; cpt < 5000; cpt++) {
d1 = (double) cpt;
for (cpt = 0; cpt < 5000; cpt++) {
d1 = (double) cpt;
xbt_dynar_pop(d, &d2);
- xbt_test_assert2(d1 == d2,
+ xbt_test_assert(d1 == d2,
"The retrieved value is not the same than the injected one (%f!=%f)",
d1, d2);
}
- xbt_test_add0
+ xbt_test_add
("==== Push 5000 doubles, insert 1000 doubles in the middle, shift everything");
d = xbt_dynar_new(sizeof(double), NULL);
for (cpt = 0; cpt < 5000; cpt++) {
for (cpt = 0; cpt < 2500; cpt++) {
d1 = (double) cpt;
xbt_dynar_shift(d, &d2);
- xbt_test_assert2(d1 == d2,
+ xbt_test_assert(d1 == d2,
"The retrieved value is not the same than the injected one at the begining (%f!=%f)",
d1, d2);
- DEBUG2("Pop %d, length=%lu", cpt, xbt_dynar_length(d));
+ XBT_DEBUG("Pop %d, length=%lu", cpt, xbt_dynar_length(d));
}
for (cpt = 999; cpt >= 0; cpt--) {
d1 = (double) cpt;
xbt_dynar_shift(d, &d2);
- xbt_test_assert2(d1 == d2,
+ xbt_test_assert(d1 == d2,
"The retrieved value is not the same than the injected one in the middle (%f!=%f)",
d1, d2);
}
for (cpt = 2500; cpt < 5000; cpt++) {
d1 = (double) cpt;
xbt_dynar_shift(d, &d2);
- xbt_test_assert2(d1 == d2,
+ xbt_test_assert(d1 == d2,
"The retrieved value is not the same than the injected one at the end (%f!=%f)",
d1, d2);
}
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add0("==== Push 5000 double, remove 2000-4000. free the rest");
+ xbt_test_add("==== Push 5000 double, remove 2000-4000. free the rest");
d = xbt_dynar_new(sizeof(double), NULL);
for (cpt = 0; cpt < 5000; cpt++) {
d1 = (double) cpt;
for (cpt = 2000; cpt < 4000; cpt++) {
d1 = (double) cpt;
xbt_dynar_remove_at(d, 2000, &d2);
- xbt_test_assert2(d1 == d2,
+ xbt_test_assert(d1 == d2,
"Remove a bad value. Got %f, expected %f", d2, d1);
}
xbt_dynar_free(&d); /* This code is used both as example and as regression test, so we try to */
char buf[1024];
char *s1, *s2;
- xbt_test_add0("==== Traverse the empty dynar");
+ xbt_test_add("==== Traverse the empty dynar");
d = xbt_dynar_new(sizeof(char *), &xbt_free_ref);
xbt_dynar_foreach(d, iter, s1) {
- xbt_test_assert0(FALSE,
+ xbt_test_assert(FALSE,
"Damnit, there is something in the empty dynar");
}
xbt_dynar_free(&d); /* This code is used both as example and as regression test, so we try to */
xbt_dynar_free(&d); /* free the struct twice here to check that it's ok, but freeing it only once */
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add1("==== Push %d strings, set them again 3 times, shift them",
+ xbt_test_add("==== Push %d strings, set them again 3 times, shift them",
NB_ELEM);
/* Populate_str [doxygen cruft] */
d = xbt_dynar_new(sizeof(char *), &xbt_free_ref);
for (cpt = 0; cpt < NB_ELEM; cpt++) {
sprintf(buf, "%d", cpt);
xbt_dynar_shift(d, &s2);
- xbt_test_assert2(!strcmp(buf, s2),
+ xbt_test_assert(!strcmp(buf, s2),
"The retrieved value is not the same than the injected one (%s!=%s)",
buf, s2);
free(s2);
xbt_dynar_free(&d); /* free the struct twice here to check that it's ok, but freeing it only once */
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add1("==== Unshift, traverse and pop %d strings", NB_ELEM);
+ xbt_test_add("==== Unshift, traverse and pop %d strings", NB_ELEM);
d = xbt_dynar_new(sizeof(char **), &xbt_free_ref);
for (cpt = 0; cpt < NB_ELEM; cpt++) {
sprintf(buf, "%d", cpt);
/* 2. Traverse the dynar with the macro */
xbt_dynar_foreach(d, iter, s1) {
sprintf(buf, "%d", NB_ELEM - iter - 1);
- xbt_test_assert2(!strcmp(buf, s1),
+ xbt_test_assert(!strcmp(buf, s1),
"The retrieved value is not the same than the injected one (%s!=%s)",
buf, s1);
}
for (cpt = 0; cpt < NB_ELEM; cpt++) {
sprintf(buf, "%d", cpt);
xbt_dynar_pop(d, &s2);
- xbt_test_assert2(!strcmp(buf, s2),
+ xbt_test_assert(!strcmp(buf, s2),
"The retrieved value is not the same than the injected one (%s!=%s)",
buf, s2);
free(s2);
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add2
+ xbt_test_add
("==== Push %d strings, insert %d strings in the middle, shift everything",
NB_ELEM, NB_ELEM / 5);
d = xbt_dynar_new(sizeof(char *), &xbt_free_ref);
for (cpt = 0; cpt < NB_ELEM / 2; cpt++) {
sprintf(buf, "%d", cpt);
xbt_dynar_shift(d, &s2);
- xbt_test_assert2(!strcmp(buf, s2),
+ xbt_test_assert(!strcmp(buf, s2),
"The retrieved value is not the same than the injected one at the begining (%s!=%s)",
buf, s2);
free(s2);
for (cpt = (NB_ELEM / 5) - 1; cpt >= 0; cpt--) {
sprintf(buf, "%d", cpt);
xbt_dynar_shift(d, &s2);
- xbt_test_assert2(!strcmp(buf, s2),
+ xbt_test_assert(!strcmp(buf, s2),
"The retrieved value is not the same than the injected one in the middle (%s!=%s)",
buf, s2);
free(s2);
for (cpt = NB_ELEM / 2; cpt < NB_ELEM; cpt++) {
sprintf(buf, "%d", cpt);
xbt_dynar_shift(d, &s2);
- xbt_test_assert2(!strcmp(buf, s2),
+ xbt_test_assert(!strcmp(buf, s2),
"The retrieved value is not the same than the injected one at the end (%s!=%s)",
buf, s2);
free(s2);
/* in your code is naturally the way to go outside a regression test */
- xbt_test_add3("==== Push %d strings, remove %d-%d. free the rest",
+ xbt_test_add("==== Push %d strings, remove %d-%d. free the rest",
NB_ELEM, 2 * (NB_ELEM / 5), 4 * (NB_ELEM / 5));
d = xbt_dynar_new(sizeof(char *), &xbt_free_ref);
for (cpt = 0; cpt < NB_ELEM; cpt++) {
for (cpt = 2 * (NB_ELEM / 5); cpt < 4 * (NB_ELEM / 5); cpt++) {
sprintf(buf, "%d", cpt);
xbt_dynar_remove_at(d, 2 * (NB_ELEM / 5), &s2);
- xbt_test_assert2(!strcmp(buf, s2),
+ xbt_test_assert(!strcmp(buf, s2),
"Remove a bad value. Got %s, expected %s", s2, buf);
free(s2);
}
static void poper_f(void *a)
{
xbt_dynar_t d = (xbt_dynar_t) a;
- int i;
+ volatile int i;
int data;
xbt_ex_t e;
xbt_dynar_t d;
xbt_thread_t pusher, poper;
- xbt_test_add0("==== Have a pusher and a popper on the dynar");
+ xbt_test_add("==== Have a pusher and a popper on the dynar");
d = xbt_dynar_new_sync(sizeof(int), NULL);
pusher = xbt_thread_create("pusher", pusher_f, d, 0 /*not joinable */ );
poper = xbt_thread_create("poper", poper_f, d, 0 /*not joinable */ );
