#! /bin/sh
# libtoolT - Provide generalized library-building support services.
-# Generated automatically by (GNU simgrid 3.3-cvs)
+# Generated automatically by (GNU simgrid 3.3-svn)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
#
# This file is part of GNU Libtool:
# ### BEGIN LIBTOOL CONFIG
-# Libtool was configured on host blaise:
+# Libtool was configured on host gromit:
# Shell to use when invoking shell scripts.
SHELL="/bin/sh"
pic_mode=default
# What is the maximum length of a command?
-max_cmd_len=32768
+max_cmd_len=98304
# Does compiler simultaneously support -c and -o options?
compiler_c_o="yes"
# Commands used to build and install an old-style archive.
RANLIB="ranlib"
-old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
+old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$oldlib"
old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$oldlib"
old_postuninstall_cmds=""
# shared library.
postdeps=""
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=""
+
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=""
link_all_deplibs=no
# Compile-time system search path for libraries
-sys_lib_search_path_spec=" /usr/lib/gcc/i486-linux-gnu/4.1.3/ /usr/lib/gcc/i486-linux-gnu/4.1.3/ /usr/lib/gcc/i486-linux-gnu/4.1.3/../../../../i486-linux-gnu/lib/i486-linux-gnu/4.1.3/ /usr/lib/gcc/i486-linux-gnu/4.1.3/../../../../i486-linux-gnu/lib/ /usr/lib/gcc/i486-linux-gnu/4.1.3/../../../i486-linux-gnu/4.1.3/ /usr/lib/gcc/i486-linux-gnu/4.1.3/../../../ /lib/i486-linux-gnu/4.1.3/ /lib/ /usr/lib/i486-linux-gnu/4.1.3/ /usr/lib/"
+sys_lib_search_path_spec="/usr/lib/gcc/i486-linux-gnu/4.3.2 /usr/lib /lib"
# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec="/lib /usr/lib /lib/i486-linux-gnu /usr/lib/i486-linux-gnu "
+sys_lib_dlsearch_path_spec="/lib /usr/lib /usr/lib/atlas /lib/i486-linux-gnu /usr/lib/i486-linux-gnu /usr/lib/R/lib /usr/local/lib "
# Fix the shell variable $srcfile for the compiler.
fix_srcfile_path=""
extract_expsyms_cmds=""
# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*"
# Symbols that must always be exported.
include_expsyms=""
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008 Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION="1.5.22 Debian 1.5.22-4"
-TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
+VERSION="1.5.26 Debian 1.5.26-4"
+TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)"
+
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
- save_LANG="$LANG"; LANG=C; export LANG
+lt_env=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ lt_env=\"$lt_var=\$$lt_var \$lt_env\"
+ $lt_var=C
+ export $lt_var
+ fi"
+done
+
+if test -n "$lt_env"; then
+ lt_env="env $lt_env"
fi
# Make sure IFS has a sensible default
preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
#####################################
# Shell function definitions:
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+ $SED -n -e '1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xdir="$my_gentop/$my_xlib"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ extracted_serial=`expr $extracted_serial + 1`
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
$show "${rm}r $my_xdir"
$run ${rm}r "$my_xdir"
;;
--version)
- $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
- $echo
- $echo "Copyright (C) 2005 Free Software Foundation, Inc."
- $echo "This is free software; see the source for copying conditions. There is NO"
- $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+ echo "\
+$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
exit $?
;;
*.class) xform=class ;;
*.cpp) xform=cpp ;;
*.cxx) xform=cxx ;;
- *.f90) xform=f90 ;;
+ *.[fF][09]?) xform=[fF][09]. ;;
*.for) xform=for ;;
*.java) xform=java ;;
+ *.obj) xform=obj ;;
+ *.sx) xform=sx ;;
esac
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
$run $rm "$lobj" "$output_obj"
$show "$command"
- if $run eval "$command"; then :
+ if $run eval $lt_env "$command"; then :
else
test -n "$output_obj" && $run $rm $removelist
exit $EXIT_FAILURE
command="$command$suppress_output"
$run $rm "$obj" "$output_obj"
$show "$command"
- if $run eval "$command"; then :
+ if $run eval $lt_env "$command"; then :
else
$run $rm $removelist
exit $EXIT_FAILURE
thread_safe=no
vinfo=
vinfo_number=no
+ single_module="${wl}-single_module"
func_infer_tag $base_compile
for arg
do
case $arg in
- -all-static | -static)
- if test "X$arg" = "X-all-static"; then
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
$echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
fi
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
- else
+ ;;
+ -static)
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=built
- fi
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
build_libtool_libs=no
build_old_libs=yes
break
continue
;;
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
compiler_flags="$compiler_flags $arg"
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
continue
;;
+ -multi_module)
+ single_module="${wl}-multi_module"
+ continue
+ ;;
+
-module)
module=yes
continue
# -m* pass through architecture-specific compiler args for GCC
# -m*, -t[45]*, -txscale* pass through architecture-specific
# compiler args for GCC
- # -pg pass through profiling flag for GCC
+ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+ # -F/path gives path to uninstalled frameworks, gcc on darwin
# @file GCC response files
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
- -t[45]*|-txscale*|@*)
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
-no-install)
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
# The PATH hackery in wrapper scripts is required on Windows
- # in order for the loader to find any dlls it needs.
+ # and Darwin in order for the loader to find any dlls it needs.
$echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
$echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
fast_install=no
continue
;;
- -static)
+ -static | -static-libtool-libs)
# The effects of -static are defined in a previous loop.
# We used to do the same as -all-static on platforms that
# didn't have a PIC flag, but the assumption that the effects
lib=
found=no
case $deplib in
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
continue
fi
name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
lib="$searchdir/lib${name}${search_ext}"
if test "$linkmode,$pass" = "prog,link"; then
if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
# We need to hardcode the library path
if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
# we do not want to link against static libs,
# but need to link against shared
eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -n "$deplibrary_names" ; then
for tmp in $deplibrary_names ; do
depdepl=$tmp
done
- if test -f "$path/$depdepl" ; then
+ if test -f "$deplibdir/$depdepl" ; then
+ depdepl="$deplibdir/$depdepl"
+ elif test -f "$path/$depdepl" ; then
depdepl="$path/$depdepl"
+ else
+ # Can't find it, oh well...
+ depdepl=
fi
# do not add paths which are already there
case " $newlib_search_path " in
case $linkmode in
oldlib)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
- fi
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;;
+ esac
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
# which has an extra 1 added just for fun
#
case $version_type in
- darwin|linux|osf|windows)
+ darwin|linux|osf|windows|none)
current=`expr $number_major + $number_minor`
age="$number_minor"
revision="$number_revision"
age="0"
;;
irix|nonstopux)
- current=`expr $number_major + $number_minor - 1`
+ current=`expr $number_major + $number_minor`
age="$number_minor"
revision="$number_minor"
+ lt_irix_increment=no
;;
*)
$echo "$modename: unknown library version type \`$version_type'" 1>&2
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
minor_current=`expr $current + 1`
- verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
;;
freebsd-aout)
;;
irix | nonstopux)
- major=`expr $current - $age + 1`
-
+ if test "X$lt_irix_increment" = "Xno"; then
+ major=`expr $current - $age`
+ else
+ major=`expr $current - $age + 1`
+ fi
case $version_type in
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
fi
# Eliminate all temporary directories.
- for path in $notinst_path; do
- lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
- deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
- done
+ #for path in $notinst_path; do
+ # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+ # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+ # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+ #done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
int main() { return 0; }
EOF
$rm conftest
- $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
- if test "$?" -eq 0 ; then
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
ldd_output=`ldd conftest`
for i in $deplibs; do
name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" -ne "0"; then
+ if test "$name" != "" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
- $LTCC $LTCFLAGS -o conftest conftest.c $i
- # Did it work?
- if test "$?" -eq 0 ; then
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
droppeddeps=yes
$echo
$echo "*** Warning! Library $i is needed by this library but I was not able to"
- $echo "*** make it link in! You will probably need to install it or some"
+ $echo "*** make it link in! You will probably need to install it or some"
$echo "*** library that it depends on before this library will be fully"
$echo "*** functional. Installing it before continuing would be even better."
fi
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
if test -n "$hardcode_libdir_flag_spec_ld"; then
- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+ case $archive_cmds in
+ *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
+ *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
+ esac
else
eval dep_rpath=\"$hardcode_libdir_flag_spec\"
fi
;;
obj)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
- fi
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;;
+ esac
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
reload_conv_objs=
gentop=
# reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
wl=
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
else
gentop="$output_objdir/${obj}x"
generated="$generated $gentop"
case $host in
*cygwin* | *mingw* )
if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
else
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
fi
;;
* )
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
;;
esac
;;
# really was required.
# Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
fi
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
else
# fast_install is set to needless
relink_command=
fi
done
relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
fi
# Quote $echo for shipping.
Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
;;
esac
$echo >> $output "\
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+ \$echo \"\$0: cannot exec \$program \$*\"
exit $EXIT_FAILURE
fi
else
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
else
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
fi
$echo "$modename: warning: relinking \`$file'" 1>&2
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
$show "$relink_command"
if $run eval "$relink_command"; then :
if test -f "$dir/$objdir/$dlname"; then
dir="$dir/$objdir"
else
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
+ if test ! -f "$dir/$dlname"; then
+ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+ exit $EXIT_FAILURE
+ fi
fi
;;
fi
# Restore saved environment variables
- if test "${save_LC_ALL+set}" = set; then
- LC_ALL="$save_LC_ALL"; export LC_ALL
- fi
- if test "${save_LANG+set}" = set; then
- LANG="$save_LANG"; export LANG
- fi
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ fi"
+ done
# Now prepare to actually exec the command.
exec_cmd="\$cmd$args"
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
+ try to export only the symbols listed in SYMFILE
-export-symbols-regex REGEX
- try to export only the symbols matching REGEX
+ try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of libtool libraries
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
-version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
+ specify library version info [each variable defaults to 0]
All other options (arguments beginning with \`-') are ignored.
# End:
# ### BEGIN LIBTOOL TAG CONFIG: CXX
-# Libtool was configured on host blaise:
+# Libtool was configured on host gromit:
# Shell to use when invoking shell scripts.
SHELL="/bin/sh"
pic_mode=default
# What is the maximum length of a command?
-max_cmd_len=32768
+max_cmd_len=98304
# Does compiler simultaneously support -c and -o options?
compiler_c_o="yes"
# Commands used to build and install an old-style archive.
RANLIB="ranlib"
-old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
+old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$oldlib"
old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$oldlib"
old_postuninstall_cmds=""
# Dependencies to place before the objects being linked to create a
# shared library.
-predep_objects="/usr/lib/gcc/i486-linux-gnu/4.1.3/../../../../lib/crti.o /usr/lib/gcc/i486-linux-gnu/4.1.3/crtbeginS.o"
+predep_objects="/usr/lib/gcc/i486-linux-gnu/4.3.2/../../../../lib/crti.o /usr/lib/gcc/i486-linux-gnu/4.3.2/crtbeginS.o"
# Dependencies to place after the objects being linked to create a
# shared library.
-postdep_objects="/usr/lib/gcc/i486-linux-gnu/4.1.3/crtendS.o /usr/lib/gcc/i486-linux-gnu/4.1.3/../../../../lib/crtn.o"
+postdep_objects="/usr/lib/gcc/i486-linux-gnu/4.3.2/crtendS.o /usr/lib/gcc/i486-linux-gnu/4.3.2/../../../../lib/crtn.o"
# Dependencies to place before the objects being linked to create a
# shared library.
# shared library.
postdeps="-lstdc++ -lm -lgcc_s -lc -lgcc_s"
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs="/usr/lib/gcc/i486-linux-gnu/4.3.2 /usr/lib/gcc/i486-linux-gnu/4.3.2 /usr/lib/gcc/i486-linux-gnu/4.3.2/../../../../lib /lib/../lib /usr/lib/../lib /usr/lib/gcc/i486-linux-gnu/4.3.2/../../.."
+
# The library search path used internally by the compiler when linking
# a shared library.
-compiler_lib_search_path="-L/usr/lib/gcc/i486-linux-gnu/4.1.3 -L/usr/lib/gcc/i486-linux-gnu/4.1.3 -L/usr/lib/gcc/i486-linux-gnu/4.1.3/../../../../lib -L/lib/../lib -L/usr/lib/../lib"
+compiler_lib_search_path="-L/usr/lib/gcc/i486-linux-gnu/4.3.2 -L/usr/lib/gcc/i486-linux-gnu/4.3.2 -L/usr/lib/gcc/i486-linux-gnu/4.3.2/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/i486-linux-gnu/4.3.2/../../.."
# Method to check whether dependent libraries are shared objects.
deplibs_check_method="pass_all"
link_all_deplibs=no
# Compile-time system search path for libraries
-sys_lib_search_path_spec=" /usr/lib/gcc/i486-linux-gnu/4.1.3/ /usr/lib/gcc/i486-linux-gnu/4.1.3/ /usr/lib/gcc/i486-linux-gnu/4.1.3/../../../../i486-linux-gnu/lib/i486-linux-gnu/4.1.3/ /usr/lib/gcc/i486-linux-gnu/4.1.3/../../../../i486-linux-gnu/lib/ /usr/lib/gcc/i486-linux-gnu/4.1.3/../../../i486-linux-gnu/4.1.3/ /usr/lib/gcc/i486-linux-gnu/4.1.3/../../../ /lib/i486-linux-gnu/4.1.3/ /lib/ /usr/lib/i486-linux-gnu/4.1.3/ /usr/lib/"
+sys_lib_search_path_spec="/usr/lib/gcc/i486-linux-gnu/4.3.2 /usr/lib /lib"
# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec="/lib /usr/lib /lib/i486-linux-gnu /usr/lib/i486-linux-gnu "
+sys_lib_dlsearch_path_spec="/lib /usr/lib /usr/lib/atlas /lib/i486-linux-gnu /usr/lib/i486-linux-gnu /usr/lib/R/lib /usr/local/lib "
# Fix the shell variable $srcfile for the compiler.
fix_srcfile_path=""
extract_expsyms_cmds=""
# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=""
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*"
# Symbols that must always be exported.
include_expsyms=""
# ### BEGIN LIBTOOL TAG CONFIG: GCJ
-# Libtool was configured on host blaise:
+# Libtool was configured on host gromit:
# Shell to use when invoking shell scripts.
SHELL="/bin/sh"
exeext=""
# Additional compiler flags for building library objects.
-pic_flag=" -fPIC"
+pic_flag=""
pic_mode=default
# What is the maximum length of a command?
-max_cmd_len=32768
+max_cmd_len=98304
# Does compiler simultaneously support -c and -o options?
-compiler_c_o="yes"
+compiler_c_o="no"
# Must we lock files when doing compilation?
need_locks="no"
# Commands used to build and install an old-style archive.
RANLIB="ranlib"
-old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
+old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$oldlib"
old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$oldlib"
old_postuninstall_cmds=""
# shared library.
postdeps=""
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=""
+
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=""
link_all_deplibs=no
# Compile-time system search path for libraries
-sys_lib_search_path_spec=" /usr/lib/gcc/i486-linux-gnu/4.1.2/ /usr/lib/gcc/i486-linux-gnu/4.1.2/ /usr/lib/gcc/i486-linux-gnu/4.1.2/../../../../i486-linux-gnu/lib/i486-linux-gnu/4.1.2/ /usr/lib/gcc/i486-linux-gnu/4.1.2/../../../../i486-linux-gnu/lib/ /usr/lib/gcc/i486-linux-gnu/4.1.2/../../../i486-linux-gnu/4.1.2/ /usr/lib/gcc/i486-linux-gnu/4.1.2/../../../ /lib/i486-linux-gnu/4.1.2/ /lib/ /usr/lib/i486-linux-gnu/4.1.2/ /usr/lib/"
+sys_lib_search_path_spec="/usr/lib/gcc/i486-linux-gnu/4.3.2 /usr/lib /lib"
# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec="/lib /usr/lib /lib/i486-linux-gnu /usr/lib/i486-linux-gnu "
+sys_lib_dlsearch_path_spec="/lib /usr/lib /usr/lib/atlas /lib/i486-linux-gnu /usr/lib/i486-linux-gnu /usr/lib/R/lib /usr/local/lib "
# Fix the shell variable $srcfile for the compiler.
fix_srcfile_path=""
extract_expsyms_cmds=""
# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*"
# Symbols that must always be exported.
include_expsyms=""
