message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
set(PROCESSOR_x86_64 1)
ENDIF()
- if (MSVC)
- message(STATUS "Disable fast raw contextes on Microsoft Visual.")
+ if (WIN32)
+ message(STATUS "Disable fast raw contextes on Windows.")
else()
set(HAVE_RAW_CONTEXTS 1)
endif()
endif()
endif()
+if(WIN32)
+ set(Boost_USE_STATIC_LIBS 1)
+endif()
+
find_package(Boost 1.48)
if(Boost_FOUND)
include_directories(${Boost_INCLUDE_DIRS})
CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
+CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
+CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
if(MINGW)
set(HAVE_VASPRINTF 1)
endif()
-CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
-CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
#Check if __thread is defined
execute_process(
endif()
-# This is needed for ucontext on MacOS X:
-if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
- add_definitions(-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE)
+if(HAVE_PTHREAD)
+ set(HAVE_THREAD_CONTEXTS 1)
+ message("-- Support for thread context factory ok.")
endif()
-try_compile(HAVE_UCONTEXT
+
+
+if(NOT HAVE_UCONTEXT_H)
+ message("-- No ucontext factory: <ucontext.h> not found.")
+elseif(APPLE)
+ message("-- No ucontext factory: Apple don't want us to use them.")
+ set(HAVE_UCONTEXT_H 0)
+else()
+ try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
+ OUTPUT_VARIABLE compile_makecontext_output)
+
+ #If can have both context
+ if(compile_makecontext)
+ set(HAVE_UCONTEXT_CONTEXTS 1)
+ message("-- Support for ucontext factory ok.")
+ else()
+ message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
+ message("-- No ucontext factory: makecontext() is not compilable.")
+ endif()
+
+ # Stack setup (size and address)
+ try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
+ ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
+ RUN_OUTPUT_VARIABLE stack_setup)
+
+ LIST(LENGTH stack_setup stack_setup_len)
+ if("${stack_setup_len}" STREQUAL "2")
+ LIST(GET stack_setup 0 makecontext_addr)
+ LIST(GET stack_setup 1 makecontext_size)
+ set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
+ set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
+ else()
+ message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
+ endif()
+
+ # Stack growth direction (upward or downward)
+ try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_AC_CHECK_MCSC.c)
+ ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
+ RUN_OUTPUT_VARIABLE stack
+ COPY_FILE test_stackgrowth)
-#If can have both context
-if(HAVE_UCONTEXT)
- set(HAVE_UCONTEXT_CONTEXTS 1)
- message("-- Support for ucontext factory")
+ if("${stack}" STREQUAL "down")
+ set(PTH_STACKGROWTH "-1")
+ elseif("${stack}" STREQUAL "up")
+ set(PTH_STACKGROWTH "1")
+ else()
+ if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
+ set(PTH_STACKGROWTH "-1")
+ elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
+ set(PTH_STACKGROWTH "-1")
+ else()
+ message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
+ endif()
+ endif()
+ # If the test ran well, remove the test binary
+ execute_process(COMMAND ${CMAKE_COMMAND} -E remove test_stackgrowth)
endif()
+#--------------------------------------------------------------------------------------------------
-if(HAVE_PTHREAD)
- set(HAVE_THREAD_CONTEXTS 1)
- message("-- Support for thread context factory")
+### check for addr2line
+find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
+if(ADDR2LINE)
+ set(ADDR2LINE "${ADDR2LINE}/addr2line")
endif()
###############
if(GIT_DATE)
set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} (${GIT_DATE})")
endif()
-#--------------------------------------------------------------------------------------------------
-set(makecontext_CPPFLAGS_2 "")
-if(HAVE_UCONTEXT_H)
- set(makecontext_CPPFLAGS "-DTEST_makecontext")
- if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
- set(makecontext_CPPFLAGS_2 "-D_XOPEN_SOURCE=700")
- endif()
+### Generate the required headers and scripts
+#############################################
+configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h" @ONLY IMMEDIATE)
- file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
+# We need two versions of the SMPI scripts because they contain the path to the library
+# so, it depends of whether SimGrid is installed, or run from the sources (during the build)
+file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all scripts, inlined in each of them
- if(CMAKE_CROSSCOMPILING)
- set(RUN_makecontext_VAR "cross")
- set(COMPILE_makecontext_VAR "cross")
- else()
- try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
- COMPILE_DEFINITIONS "${makecontext_CPPFLAGS} ${makecontext_CPPFLAGS_2}"
- )
- endif()
-
- if(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
- file(READ ${CMAKE_BINARY_DIR}/conftestval MAKECONTEXT_ADDR_SIZE)
- string(REPLACE "\n" "" MAKECONTEXT_ADDR_SIZE "${MAKECONTEXT_ADDR_SIZE}")
- string(REGEX MATCH ;^.*,;MAKECONTEXT_ADDR "${MAKECONTEXT_ADDR_SIZE}")
- string(REGEX MATCH ;,.*$; MAKECONTEXT_SIZE "${MAKECONTEXT_ADDR_SIZE}")
- string(REPLACE "," "" makecontext_addr "${MAKECONTEXT_ADDR}")
- string(REPLACE "," "" makecontext_size "${MAKECONTEXT_SIZE}")
- set(pth_skaddr_makecontext "#define pth_skaddr_makecontext(skaddr,sksize) (${makecontext_addr})")
- set(pth_sksize_makecontext "#define pth_sksize_makecontext(skaddr,sksize) (${makecontext_size})")
- endif()
-endif()
-
-#--------------------------------------------------------------------------------------------------
-
-### check for stackgrowth
-if (NOT CMAKE_CROSSCOMPILING)
- try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
- ${CMAKE_BINARY_DIR}
- ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
- RUN_OUTPUT_VARIABLE stack
- COPY_FILE test_stackgrowth
- )
-endif()
-if("${stack}" STREQUAL "down")
- set(PTH_STACKGROWTH "-1")
-elseif("${stack}" STREQUAL "up")
- set(PTH_STACKGROWTH "1")
-else()
- if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
- set(PTH_STACKGROWTH "-1")
- elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
- set(PTH_STACKGROWTH "-1")
- else()
- message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
- endif()
-endif()
-# If the test ran well, remove the test binary
-execute_process(COMMAND ${CMAKE_COMMAND} -E remove test_stackgrowth)
-
-###############
-## System checks
-##
-
-### check for addr2line
-find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS )
-if(ADDR2LINE)
- set(ADDR2LINE "${ADDR2LINE}/addr2line")
-endif()
-
-### File to create
-
-configure_file("${CMAKE_HOME_DIRECTORY}/src/context_sysv_config.h.in"
- "${CMAKE_BINARY_DIR}/src/context_sysv_config.h" @ONLY IMMEDIATE)
-
-SET( CMAKEDEFINE "#cmakedefine" )
-configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
-configure_file("${CMAKE_BINARY_DIR}/src/internal_config.h" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
-configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h" @ONLY IMMEDIATE)
-
-set(top_srcdir "${CMAKE_HOME_DIRECTORY}")
-set(srcdir "${CMAKE_HOME_DIRECTORY}/src")
-set(bindir "${CMAKE_BINARY_DIR}")
-
-### Script used when simgrid is installed
+### SMPI script used when simgrid is installed
set(exec_prefix ${CMAKE_INSTALL_PREFIX})
set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
set(includedir "${CMAKE_INSTALL_PREFIX}/include")
endif()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH)
configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/bin/smpicc @ONLY)
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/bin/smpicxx @ONLY)
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/bin/smpiff @ONLY)
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/bin/smpif90 @ONLY)
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/bin/smpirun @ONLY)
+foreach(script cc cxx ff f90 run)
+ configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
+endforeach()
-### Script used when simgrid is compiling
+### SMPI scripts used when compiling simgrid
+set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
set(includedir "${CMAKE_HOME_DIRECTORY}/include")
-set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
+set(libdir "${CMAKE_BINARY_DIR}/lib")
set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
if(NS3_LIBRARY_PATH)
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
endif()
set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-set(libdir "${CMAKE_BINARY_DIR}/lib")
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc @ONLY)
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx @ONLY)
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff @ONLY)
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90 @ONLY)
-configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun @ONLY)
-
-set(top_builddir ${CMAKE_HOME_DIRECTORY})
+foreach(script cc cxx ff f90 run)
+ configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
+endforeach()
if(NOT WIN32)
- execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicc)
- execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicxx)
- execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpiff)
- execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpif90)
- execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpirun)
- execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc)
- execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx)
- execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff)
- execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90)
- execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun)
+ foreach(script cc cxx ff f90 run)
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
+ execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
+ endforeach()
endif()
set(generated_headers_to_install
)
set(generated_headers
- ${CMAKE_CURRENT_BINARY_DIR}/src/context_sysv_config.h
${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h
)
